This patch fixes several capitalization issues in the about page.
To test:
- Go to the about page
=> FAIL: you should see
* Server Information (tab)
* Koha Team (tab)
* Koha Timeline (tab)
* Additional Thanks To... (at the bottom of the Koha Team tab
- Apply the patch and reload
=> SUCCESS: you should see
* Server information
* Koha team
* Timeline
* Additional thanks to...
- Sign off :-D
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
String changes, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
- Go to cataloguing
- Perform a z39.50 search with no results
- Check "Try another search" is displayed
- Perform a z39.50 search with results
- Verify display is correct as well.
Signed-off-by: George Williams <georgew@latahlibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes the $facets_info calculation from the _get_facets_data_from_record
sub so it is not done for each record. It introduces a new sub, _get_facets_info
that is called from the getRecords loop, that does the job only once.
To test:
- Apply on top of the previous patches
- Run
$ prove -v t/db_dependent/Search.t
=> SUCCESS: _get_facets_info gets tested and it passes for both MARC21 and UNIMARC.
Facets rendering should remain unchaged on the UI.
- Sign off :-D
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a test for field 100, to skip it on facet calculation
if ind1=z.
To test:
- Have IncludeSeeFromInSearches set.
- Create a biblio record, when adding an author, create a new authority record
that contains a 400$a field (see from).
- Rebuild zebra db.
- Search for the record making sure the search returns more than one record.
=> FAIL: the facets contain the 'see from' field.
- Run
$ prove -v t/db_dependent/Search.t
=> FAIL: it fails
- Apply the patch
- Run
$ prove -v t/db_dependent/Search.t
=> SUCCESS: it passes
- Re-run the search, notice the 'see from' doesn't show anymore on the facets.
- Sign off :-D
Edit: minor stylistic change
Regards
To+
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch refactors the facet extraction loop into a proper function.
The loop is changed so the MARC::Record objects are created only once
instead of the old/current behaviour: once for each defined facet (in
C4::Koha::getFacets).
To test:
- Apply the patch
=> SUCCESS: verify facets functionality remains unchanged.
- Run:
$ prove -v t/db_dependent/Search.t
=> SUCCESS: tests for _get_facets_data_from_record fail, because
100$a is considered for fields with indicator 1=z (field added
by IncludeSeeFromInSearches syspref).
- Sign off :-D
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Some libraries would like the ability choose to display the home branch
on search results while having circulation rules based on the holding
branch. This is currently impossible because both the display of the
branch in search results, and the selection of the home or holding
branch for circulation rules are controlled by the same system
preference: HomeOrHoldingBranch. This preference is described as being
used only for circulation rules, and makes no mention of its use for
display control. The display control should be split off into a separate
preference.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Note the value of the new system preference StaffSearchResultsDisplayBranch
matches the current value of HomeOrHoldingBranch
4) Set the preference to home branch
5) Perform a staff catalog search with results having items with differing home and
holding branches.
6) Note the home branch displays
7) Set the preference to holding branch
8) Repeat step 5
9) Note the holding branch displays
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, logic is now tied to a new system preference.
Passes tests and QA script.
In opac-search two regexes are added for the results of splitting the
pref AdvancedSearchTypes, allowing spaces before and after the names.
The same regexes should be added to catalogue/search.pl to have the
same behavior there.
Test plan:
Set AdvancedSearchTypes to "itemtypes | ccode | loc " (no quotes).
Check OPAC and staff with and without this patch.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch affects only the area displayed on Advanced Search
by setting the AdvancedSearchTypes OPAC system preference
accordingly. Prior to this patch, no filtering based on
OpacHiddenItems was done. This patch determines if itemtypes,
collections, or shelving locations are hidden and prevents
them from being shown.
TEST PLAN
---------
1) Back up your DB (always handy)
2) Set the Searching system preference AdvancedSearchTypes to:
'itemtypes|ccode|loc' (without the single quotes).
3) Set the OPAC system preference OpacHiddenItems to include the
lines:
itype: [{list of itemtype codes separated by commas}]
location: [{list of comma delimited shelving location codes}]
ccode: [{list of comma delimited collection codes}]
Make sure to exclude one value for each, so there will be at
least one known thing on each tab.
4) Open the OPAC.
5) Click on 'Advanced Search'
-- three tabs appear: Itemtypes, Collection, Shelving location
-- Everything is visible
6) Set the Searching system preference AdvancedSearchTypes to:
'itemtypes | ccode | loc' (without the single quotes).
7) Refresh the OPAC.
-- There will be three tabs, but ugliness ensues.
8) Apply the patch
9) Refresh the OPAC.
-- You will see: Itemtypes, Collection, Shelving location
-- Only excluded values from OpacHiddenItems will be seen.
10) Run koha qa test tools
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
All tests pass
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Small rewording in comment only.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Add LOC SRU server to sample servers installed.
This patch modifies four language files: de, en, es and nb.
For the other languages this may not be useful.
Test plan:
You could test this by using the webinstaller.
But you could also (backup) and delete your records in z3950servers, and
run the sample_z3950_servers.sql file from the command line.
Check if you see the new SRU server.
Tested using mysql. I truncated the table (to reset the IDs as well) and then ran the file. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test Plan:
1) Set ExpireReservesMaxPickUpDelay
2) Set ReservesMaxPickUpDelay to 1
3) Place a hold, set it to waiting
4) Using the MySQL console, modify the waiting date and set it to the
day before yesterday.
5) Set today as a holiday for the pickup branch in question.
6) Run misc/cronjobs/holds/cancel_expired_holds.pl
7) The hold should remain unchanged
8) Remove today as a holiday
9) Run misc/cronjobs/holds/cancel_expired_holds.pl again
10) The hold should now be canceled
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Leila <koha.aixmarseille@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- global replaced HightedStopWords syspref with NotHightedWords for
clarification purposes. Hopefully this is a bit better and still
not too verbose.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, fixed some tabs and a typo.
- Added functionality to new bootstrap theme
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
- changed sample words to and|or|not in sysprefs.sql and
updatedatabase
- changed systempreference name from OpacHighlightedStopwords
to HighlightedStopwords, as it also works for the staff
results page
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This patch adds a system preference to control stopwords used to
prevent operators and other 'minor' words from being highlighted
in search results when the OpacHighlightWords syspref is enabled
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Works as advertised, I fixed the updatedatabase to use XXX so it won't
clash as much
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed a conflict in updatedatabase.pl.
Also fixed tabs in opac-detail.tt
Feature passes all tests and QA script now.
Tested in intranet and OPAC with different words and searches.
Works on results pages and OPAC detail page.
Highlighting and unhighlighting still works correctly.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script, works as expected.
Patch sponsored by the CCSR ( http://www.ccsr.qc.ca )
This new patch builds on the work of Bug 12164 by allowing the
user to enter a new name (budget_period_description) for the
cloned budget.
A test was added to t/db_dependent/Budgets.t.
Sponsored-by: CCSR
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Edit: added the sponsored-by line.
For those who would not understand the two version numbers and come up
with the idea to check the Help page, some text is added.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds information about required perl module versions to the
'About' page.
To test:
Apply patch.
In staff client, go to 'About', tab 'Perl modules'
The required version numbers should display in small print next to or
underneath the module names.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Incorrect display of Email Address in Alternate Address Patron Details
Without patch, mail from primary address is displayed in Alternate address
With patch, correct mail address is displayed
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Currently, if you have holds charges, they are not taken into
consideration when circulating items.
Manual Invoices, and rental charges are governed by a systempreference
Holds are never counted
And all other charges (overdues, lost items etc) are counted
This patch adds a systempreference to allow Hold charges to be counted
as well.
To test
1/ Set a borrower category to have holds charges
2/ Place a hold for a borrower in that category
3/ Go to checkout, notice that charge is not showing or blocking on
that screen
4/ apply patch
5/ notice that charge now shows on checkout
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
- Install two language variants (e.g. de-DE and de-CH)
- Create OPAC news for each of them
- Verify that they are displayed in OPAC as appropriate
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works Ok, no koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works ok, all installed languages now show up in the pull downs
and display for the selected language in the OPAC.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Replace "Zip code" with "Zip/Postal code" which is used in
members/memberentry.pl and members/moremember.pl.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It would be helpful to be able to use the batch patron modification tool
to update city, state, zipcode, and country. This patch adds this
functionality.
This patch corrects an error in the batch modification script which
would have incorrectly marked first name as required if surname was
required.
This patch also converts the table sorting configuration to use table
header class names instead of index-based sorting for columns containing
dates.
To test, apply the patch and submit a batch of patrons to the batch
patron modification tool (Tools -> Batch patron modification).
In the list of patrons which will be modified you should see columns for
city, state, zipcode, and country. Table sorting should work correctly
without errors, including the registration and expiry date columns.
In the list of fields which can be batch modified you should see inputs
for city, state zipcode, and country. These fields should correctly
reflect mandatory/not mandatory based on the BorrowerMandatoryField
system preference.
Submit batch changes to a variety of fields and confirm that changes are
applied correctly. On the page of results the table should correctly
show all fields and be sorted correctly.
Signed-off-by: cachan <pierre.lorgue@ens-cachan.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds options to include/exclude files by matching their names.
Also modifies current code to check only filenames (not dirs)
Checking is case insensitive !!
NOTE: The difference between -f and -m is subtle, but important.
They differs mainly on update,: -f do a merge, -m a replace
To test after patch:
A) Include only 'normarc'
1. create
cd misc/translator
perl tmpl_process3.pl create -i ../../koha-tmpl/opac-tmpl/bootstrap/en -s normarc.po -r -m normarc
- check provenance of strings
egrep "^#:" normarc.po | cut -d":" -f2 | sort | uniq
- only files with normarc in their names must be present
2. update
perl tmpl_process3.pl update -i ../../koha-tmpl/opac-tmpl/bootstrap/en -s normarc.po -r -m normarc
- repeat check
3. install
mkdir test
perl tmpl_process3.pl install -i ../../koha-tmpl/opac-tmpl/bootstrap/en -o ./test -s normarc.po -r -m normarc
- check name of created files
rm -rf test normarc.po
B) Exclude
4. create
perl tmpl_process3.pl create -i ../../koha-tmpl/opac-tmpl/bootstrap/en -s xnormarc.po -r -n normarc
- check provenance
egrep "^#:" xnormarc.po | cut -d":" -f2 | sort | uniq | grep -i normarc
- there must be no results
5. update
perl tmpl_process3.pl update -i ../../koha-tmpl/opac-tmpl/bootstrap/en -s xnormarc.po -r -n normarc
- check provenance
6. install
mkdir test
perl tmpl_process3.pl install -i ../../koha-tmpl/opac-tmpl/bootstrap/en -o ./test -s xnormarc.po -r -n normarc
- check files
find test | grep -i normarc
- there must be no results
You can also try another combination, use for example "-m patron -m user -m bottom" (or use -n)
or mixed "-m marc -n normarc", do create/install and look filenames
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds the option to use multiple source
dirs for tmpl_process3.pl on create/update actions.
To test after patch:
A) Old
1. install
cd misc/translator
perl tmpl_process3.pl create -i ../../koha-tmpl/opac-tmpl/bootstrap/en -s bootstrap.po -r
2. update
perl tmpl_process3.pl update -i ../../koha-tmpl/opac-tmpl/bootstrap -s bootstrap.po -r
3. install
mkdir test
perl tmpl_process3.pl install -i ../../koha-tmpl/opac-tmpl/bootstrap -s bootstrap.po -r -o ./test -q
- check same number of files
ls -lR ../../koha-tmpl/opac-tmpl/bootstrap | wc -l
ls -lR ./test | wc -l
rm -f bootstrap.po
B) New
4. create from multiple sources
perl tmpl_process3.pl create -i ../../koha-tmpl/opac-tmpl/prog/en -i ../../koha-tmpl/opac-tmpl/bootstrap/en -i ../../koha-tmpl/opac-tmpl/ccsr/en -s opac.po -r
5. update from multiple source
perl tmpl_process3.pl update -i ../../koha-tmpl/opac-tmpl/prog/en -i ../../koha-tmpl/opac-tmpl/bootstrap/en -i ../../koha-tmpl/opac-tmpl/ccsr/en -s opac.po -r
6. install (must give an error)
perl tmpl_process3.pl install -i ../../koha-tmpl/opac-tmpl/prog/en -i ../../koha-tmpl/opac-tmpl/bootstrap -s opac.po -r -o ./test
7. updated help
perl tmpl_process3.pl --help
Any other functionality must not be affected
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch modifies the update process for PO files,
removing obsoleted strings. Currently they are removed
manually as part of the standar procedure of strings update.
Also backup files (*~) need to be removed manually.
To test:
1. Update translation files for any language, ej. fi-FI
(cd misc/translation; perl translate update fi-FI)
2. Check existence of obsoleted strings
egrep "#~ msg" misc/translator/po/fi-FI-*
3. Check existence of backup files
ls misc/translator/po/fi-FI-*~
4. Reset to HEAD and clean
5. Apply the patch
6. Update again, check there are no more obsoleted
strings nor backup files
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
Load up a circulation page, note that the middle of the barcode field doesn't line up with the Check-out button.
note that the date-select tickbox is also not aligned with the rest of the things on it's line
Apply the patch
Reload the page, verify that things are now in alignment.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This adds entries for 690-699 to the authorities linker, so they get
linked up like everything else.
To Test:
* make sure your framework doesn't have 690 set up to link to
authorities (or it'll get linked as part of cataloguing.)
* add a subject with some term to the 690$a field.
* add an authority for TOPIC_TERM with the matching term.
* make sure zebra is up to date.
* run link_bibs_to_authorities.pl over your system.
* check that the authority is now linked to your record.
* repeat with the other 69x fields if you like.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested using 696a (PERSO_NAME). Works as described, no errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This works as described, but linked authorities won't search
correctly when clicking on the link on the detail page,
as the 69x $9 is not indexed.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch makes GetMarcISSN test for empty subfield before pushing to the
result array.
To test:
- Run the regression test
=> FAILS for all MARC flavours
- Apply the patch
- Run the regression test
=> SUCCESS: tests pass
- Sign off
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Proves GetMarcISSN returns empty ISSNs in the results array.
To reproduce:
- Run $ prove -v t/db_dependent/Biblio.t
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch renames name to servername and type to servertype.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested all sql files by script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Removing icon, description and position from installer sql files.
Not all files contained them.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
I have run all sql files on an empty table by script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The last test on the first series, fails randomly on Perl 5.18:
not ok 12 - Third query makes no difference
# Failed test 'Third query makes no difference'
# at t/db_dependent/Breeding.t line 104.
# got: ''
# expected: '1'
# Looks like you failed 1 test of 12.
not ok 1 - _build_query
This change makes tests pass. Please consider if this needs to be fixed
(i.e. sort order matters) or the test needs to be rewritten.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
I agree with adding the sort. (The need for doing this in Perl 5.18 is another
topic.)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Resolved:
[1] FAIL C4/Breeding.pm
FAIL critic ControlStructures::ProhibitMutatingListFunctions
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
No warnings anymore.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch may serve as a starting point for more unit tests in this part
of the code.
In this patch most internal subroutines of Z3950Search are covered.
In the XSLT part we reuse a XSL template from the XSLT_Handler.t test.
It needed a little tweaking for namespaces. And added the indicators on
the 990 field.
Test plan:
Run both Breeding.t and XSLT_Handler.t.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Z39.50 search now includes SRU targets.
This patch only touches strings referring to it.
No changes in behavior.
It replaces Z39.50 with Z39.50/SRU or external.
Deletes obsolete template z3950/searchresult.tt: not in use for some time.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch only removes surrouding spaces at comma and equals-sign while
passing the options in sru_fields to the ZOOM object.
Test plan:
If you add spaces between options in sru_fields, searching should still work.
E.g. sru_fields= sru = get , sru_version = 1.1
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
