If you have EmailOverduesNoEmail = Send and specify "--html somedir",
overdue_notices.pl will send a file by email that contains partial
HTML, as a file called attachment.txt. This patch fixes that.
To reproduce in koha-testing-docker:
- EmailOverduesNoEmail = Send
- Make sure you have a loan that was due yesterday, by backdating the
due date
- Set up an overdue action to send "Overdue Notice" (ODUE) to the
category you made the loan to above, when a loan is one day overdue
- Run this command:
$ sudo koha-shell -c "perl misc/cronjobs/overdue_notices.pl -v -t -html /tmp/" kohadev
- Look at the file /tmp/notices-<DATE>.html and make sure it is a full
HTML document, with <html>, <head>, <body> etc.
- Create a report like this:
SELECT message_id, letter_id, borrowernumber, subject, CONCAT( '<pre>', content, '</pre>' ) AS content,
metadata, letter_code, message_transport_type, time_queued, updated_on, to_address, content_type, failure_code
FROM message_queue
WHERE subject = 'Overdue Notices'
ORDER BY message_id DESC
- Run the report and verify there is a line like this in the "content"
of the newest message:
Content-Type: text/plain; name=attachment.txt
- A part of the "content" will be a block of several lines of gibberish
(base64) that look something like "RGVhciAga29oYSwNCg0KQWN...". Copy
this block of text to somewhere like base64decode.org and decode the
text. You should see a fragment of HTML, without <html>, <head>,
<body> etc.
To test:
- Apply the patch
- Run overdue_notices.pl again, with the same arguments as above
- Make sure /tmp/notices-<DATE>.html is still a full HTML document
- Re-run the report, and make sure you now have this in the "content":
Content-Type: text/html; name=attachment.html
- Decode the base64 and make sure it is now a full HTML document, with
<html>, <head>, <body> etc.
- Re-run overdue_notices.pl as above, but replace "-html /tmp/" with
"-csv /tmp/test.csv"
- Make sure /tmp/test.csv and the decoded base64 from the report
contains CSV data
- Re-run overdue_notices.pl as above, but replace "-html /tmp/" with
"-text /tmp/"
- Make sure /tmp/notices-<DATE>.txt and the decoded base64 from the
report contains no HTML
Note:
- The actual text from the different messages will be enclosed in
<pre>-tags
- If you have HTML in your ODUE message template and run with -v, you
will have warnings saying "The following terms were not matched and
replaced"
These are due to Bug 14347, and are not adressed by the current patch.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 6d1890fc8e)
Signed-off-by: Jacob O'Mara <jacob.omara@ptfs-europe.com>
The default of 1 resembles the old behavior: 1 fork for the job.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 3bf4addb24)
Signed-off-by: Jacob O'Mara <jacob.omara@ptfs-europe.com>
Right now background_jobs_worker.pl only processes jobs in serial. It would make sense to handle jobs in parallel up to a user definable limit.
Test Plan:
1) Apply this patch
2) Stop background_jobs_worker.pl
3) Generate some background jobs by editing records, placing holds, etc
4) Watch processes in a new terminal: watch -n 0.1 'ps aux | grep background_jobs_worker.pl'
5) Run background_jobs_worker.pl with parameter -m 3 or some other
number of max processes
6) Note the multiple forked processes in the ps output
Test notes - also tested the following on KTD:
1. Stop background_jobs_worker.pl
2. Edit /etc/koha/sites/kohadev/koha-conf.xml - set max_processes to 10
3. Generate some background jobs
4. Watch processes in a new terminal: watch -n 0.1 'ps aux | grep background_jobs_worker.pl'
5. Restart all
6. Confirm multiple forked processes in the ps output
Both methods work as expected and generate multiple forked processes
based on the value set for max processes.
Signed-off-by: emlam <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 311d68815f)
Signed-off-by: Jacob O'Mara <jacob.omara@ptfs-europe.com>
In search_for_data_inconsistencies.pl, the test for authorized values is a list in one line :
* The Framework *VR* is using the authorised value's category *LOC*, but the following items.location do not have a value defined ({itemnumber => value }):
{94 => AV} {95 => AV} {96 => AV} {97 => AV} {98 => AV} {99 => AV} {100 => AV} {101 => AV} {102 => AV} {103 => AV}
It would be more clear with new lines, especially for scripts (grep, awk ...) :
* The Framework *VR* is using the authorised value's category *LOC*, but the following items.location do not have a value defined ({itemnumber => value }):
{94 => AV}
{95 => AV}
{96 => AV}
{97 => AV}
{98 => AV}
{99 => AV}
{100 => AV}
{101 => AV}
{102 => AV}
{103 => AV}
Test plan :
1) In koha-testing-docker
2) Delete in authorized values LOC the value AV
3) Run misc/maintenance/search_for_data_inconsistencies.pl
=> You see the new line in result
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 45323886ae)
Signed-off-by: Jacob O'Mara <jacob.omara@ptfs-europe.com>
To test:
1 - Enable OAI sets, and define a set with mapping 952 y = BK
2 - perl misc/migration_tools/build_oai_sets.pl -v -i -r
3 - The script dies:
Koha::Biblio::Metadata->record must be called on an instantiated object or like a class method with a record passed in parameter
4 - Apply patch
5 - Repeat
6 - Success!
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Edit: tcohen updated indentation
(cherry picked from commit d6433ff71e)
Signed-off-by: Jacob O'Mara <jacob.omara@ptfs-europe.com>
Some of our scripts have a space in the "shebang" (first) line:
#! /usr/bin/perl
This is not illegal, and it does work, but it is good to be
consistent, so this patch removes the space.
To test:
- Run: grep -rn --include=*.pl '#! /usr/' *
- See the list of files that have a space in the shebang
- Apply the patch
- Run the command again, there should be no output, meaning there
are no more files with space in the shebang
- Have a look at the patch and check that it only changes the
shebangs
- Sign off
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 6a0cd4cc5e)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Jacob O'Mara <jacob.omara@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Edit: Kyle, stop impersonating John Doe
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit e8c232fcf7)
Signed-off-by: Jacob O'Mara <jacob.omara@ptfs-europe.com>
If the installer files exist for a given language, the translate script
won't update it.
We should get a confirmation from Bernardo (author of bug 24262), but I
don't understand why it could be needed (side-effects?)
Test plan:
Installer several times the same language, drop the DB and run the
installer+onboarding process.
Check files installed by the installer (yaml for notice templates,
biblio frameworks) have inserted the data properly in DB.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomás Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit aa3444505f)
Signed-off-by: Jacob O'Mara <jacob.omara@ptfs-europe.com>
Adapted test plan:
1) Apply this patch
2) For DUE and PREDUE notices, set the message body to the following:
Title: [% checkout.title %]
3) For DUEDGST and PREDUEDGST notices, set the message body to the following:
Titles:
[% FOREACH c IN checkouts %]
* [% c.title %][% END %]
4) Generate PREDUE and DUE notices for patrons including digests
5) Verify those notices contain the checkout titles
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Edit: tcohen renamed @issues => @checkouts as well
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomás Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit d81bca8270)
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Remove loops that only operate one one result only
Signed-off-by: Felicity Brown <Felicity.Brown@montgomerycountymd.gov>
Signed-off-by: George Veranis <gveranis@dataly.gr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit fd7a612c6e)
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Predue / due notices are limited to using itemscontent to display checkouts data. It would be nice to make all the checkouts data available for those notices so that libraries could format that data more nicely if they wish.
1) Apply this patch
2) For DUE and PREDUE notices, set the message body to the following:
Title: [% issue.title %]
3) For DUEDGST and PREDUEDGST notices, set the message body to the following:
Titles:
[% FOREACH i IN issues %]
* [% i.title %]
[% END %]
4) Generate PREDUE and DUE notices for patrons including digests
5) Verify those notices contain the checkout titles
Signed-off-by: Felicity Brown <Felicity.Brown@montgomerycountymd.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 2114c70d11)
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
This patch allows for selection of framework to use when overlaying
records - by default it is set to keep the initial framework
To test:
1 - Create some records using one framework
2 - Export the records
3 - Edit the records to add fields not in original framework
4 - Stage records using a rule that will find matches
5 - Import
6 - Note records contain new fields on display, but they are lost on edit
7 - Apply patch
8 - Stage records again
9 - Select a framework that contains the new fields on import
10 - Import records
11 - Note records now use selected framework and are displayed/edited
correctly
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit e5f251a709)
Signed-off-by: Jacob O'Mara <jacob.omara@ptfs-europe.com>
Typo fix to prevent confusion in CLI usage
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 4734ee5d00)
Signed-off-by: Jacob O'Mara <jacob.omara@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 2570062d25)
Signed-off-by: Jacob O'Mara <jacob.omara@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit b1867f8485)
Signed-off-by: Jacob O'Mara <jacob.omara@ptfs-europe.com>
This patch adds the option to pass a no-block option and use this
in checkout/checkin/renew messages
To test:
1 - perl misc/sip_cli_emulator.pl -a localhost -p 6001 -l CPL -su term1 -sp term1 -m checkin --item 39999000010831
2 - Confirm out like:
SEND: 09N20221227 20183920221227 201839APCPL|AOCPL|AB39999000010831|ACterm1|BIN|
(Note the N after 09)
3 - Apply patch
4 - Restart SIP, repeat 1
5 - Confirm still an N
6 - perl misc/sip_cli_emulator.pl -a localhost -p 6001 -l CPL -su term1 -sp term1 -m checkin --item 39999000010831 -n N
7 - Confirm still an N
8 - perl misc/sip_cli_emulator.pl -a localhost -p 6001 -l CPL -su term1 -sp term1 -m checkin --item 39999000010831 -n Y
9 - Confirm the send has a Y after 09
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 0880d80949)
Signed-off-by: Jacob O'Mara <jacob.omara@ptfs-europe.com>
see comment 0 for more info
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 3bf31ae4d4)
Signed-off-by: Jacob O'Mara <jacob.omara@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 89ff35b025)
Signed-off-by: Jacob O'Mara <jacob.omara@ptfs-europe.com>
To test:
1 - Apply patch
2 - vim /etc/koha/sites/kohadev/log4perl.conf, Add lines below:
log4perl.logger.worker = WARN, WORKER
log4perl.appender.WORKER=Log::Log4perl::Appender::Screen
log4perl.appender.WORKER.stderr=1
log4perl.appender.WORKER.mode=append
log4perl.appender.WORKER.layout=PatternLayout
log4perl.appender.WORKER.layout.ConversionPattern=[%d] [%p] %m %l%n
log4perl.appender.WORKER.utf8=1
3 - Restart all
4 - Edit misc/background_jobs_worker.pl
- my $job = Koha::BackgroundJobs->find($args->{job_id});
+ my $job;# = Koha::BackgroundJobs->find($args->{job_id});
5 - In another terminal: tail -f /var/log/koha/kohadev/koha-worker-error.log
6 - Force enqueue a job (that won't be found because of #4
perl -e 'use Koha::BackgroundJob::BatchUpdateItem; my $bg = Koha::BackgroundJob::BatchUpdateItem->new(); $bg->enqueue({ record_ids=>['888888']});'
7 - Note error in log like:
[2023/01/11 19:26:10] [WARN] No job found for id=2983 main:: /kohadevbox/koha/misc/background_jobs_worker.pl (111)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 3b1f2c57ea)
Signed-off-by: Jacob O'Mara <jacob.omara@ptfs-europe.com>
Do not implicitly depend on last statement returning nothing.
Make it explicit. We want $args to be null here.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 08cc23626c)
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 85c330d8f2)
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit 8df96262c1)
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
I have faced a problem when testing an incorrect version of bug 32370.
The frame sent to the message broker was not a correct JSON encoded
string, and its decoding was obviously failing, exploding the worker
script.
Additionally, as we don't send a ack for this frame, the next pull will
result in processing the same message, and so in the same explosion.
No more messages can be processed!
This patch is logging the error and ack the message to the broker, in
order to not get stuck.
Test plan:
0. Dont' apply this patch
1. Enqueue a bad message
a. Apply 32370
b. Comment the following line in Koha::BackgroundJob::enqueue
$self->set_encoded_json_field( { data => $job_args, field => 'data' } );
c. restart_all
d. Use the batch item modification tool to enqueue a new job
=> Notice the error in the log
=> Note that the status of the job is "new"
=> Inspect rabbitmq queue:
% rabbitmq-plugins enable rabbitmq_management
% rabbitmqadmin get queue=koha_kohadev-long_tasks
You will notice there is a message in the "long_tasks" queue
2. Enqueue a good message
a. Remove the change from 1.b
b. restart_all
c. Enqueue another job
=> Same error in the log
=> Both jobs are new
=> Inspect rabbitmq, there are 2 messages
3. Apply this patch
4. restart_all
=> Second (good) job is finished
=> rabbitmq long_tasks queue is empty
We cannot mark the first job as done, we have no idea which job it was!
QA: Note that this patch is dealing with another problem, not tested in
this test plan. If an exception is not correctly caught by the ->process
method of the job, we won't crash the worker. The job will be marked as
failed.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit ca9a598183)
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Splitting off this functionality from bug 32558. This is the comment that started this discussion: https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=32558#c15
From the O'Reilly book Mobile and Web Messaging:
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit b3c5bd02e1)
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Bug 29788 inadvertantly replaced a call to safe_delete() with safe_to_delete()
such that any time the script should delete an item it only checks to see if
the item is delectable, after which deletion of the record fails because the
items were not deleted.
Test Plan:
1) Mark a record with items to be deleted via the record leader
2) Run delete_records_via_leader.pl -i -b -v
3) Note the script says it is deleting the items but then the record
deletion fails. Note the items remain in the items table of the
database.
4) Apply this patch
5) Repeat step 2
6) This time the items and record should be deleted!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
(cherry picked from commit 790f00781a)
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
This patch adds a prefetch size of 1 to the background jobs worker,
so that it fetches 1 message at a time. Without this change,
the RabbitMQ connection timeout when too many messages for slow tasks
are fetched at the same time.
To test:
0. Apply patch
1. Run background worker
2. Rapidly enqueue multiple jobs that in total will take longer
than 30 minutes to process
Bug 32481: Use correct prefetch syntax for RabbitMQ
According to https://www.rabbitmq.com/stomp.html the header to
use for managing the prefetch is "prefetch-count".
You can verify the number of delivered and unacknowledged messages
on a channel on a connection by running "rabbitmqctl list_channels"
on the RabbitMQ host. This will tell you how many messages have been
delivered and are awaiting acknowledgement
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(cherry picked from commit cd89c38321)
Signed-off-by: Jacob O'Mara <jacob.omara@ptfs-europe.com>
This script has a pattern to delete rows depending on a given
date/number of days, we should use the filter_by_last_update
Koha::Objects method.
No need for another method and tests, everything is already tested
there.
This patch also suggests to rename the reference to "background" and
"bg" with "jobs", which seems more appropriate and not an abbreviation
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
There as a mismatch between the parameter name in documentation (bg-days)
and what was checked in the code (bg-jobs). This makes both match.
To test:
* Apply patch
* Make sure you have some background_jobs older than one day
* Verify the help of the script documents the parameter bg-days
* Run the cleanup_database.pl job
Example: ./misc/cronjobs/cleanup_database.pl --bg-days --confirm -v
* Verify there are no errors and the lines have been deleted as expected
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Some libraries need to recalculate a patron's expiration date any time they are updated via a patron import from file.
Test Plan:
1) Apply this patch
2) prove t/db_dependent/Koha/Patrons/Import.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The previous implementation was using vue-i18n inject localized strings
into the Vue app. However it was using json files, and we needed
additional overhead to convert from/to PO files.
I've also tried vue3-gettext that use PO, but the overhead to work with
our workflow was existent as well (see branch joubu/vue3-gettext).
vue-i18n-extract was using for extracting, and a specific misc script
(misc/translate_json.pl) was also used to generate the json file. They
can be removed.
Here we are simply reusing our existing workflow, and we will improve it
(ie. make it more vue-ish) later if we need it.
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Note that we are adding an extra space for id and counter, otherwise
they got removed in favor of the "simple" string.
{ Agreement: Agreement }
replaced
{ Agreement: { id: ..., counter: ... } }
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
* Remove ":" from the translation to prevent duplication string
* Add a script to auto-translate the strings in English
echo "{}" > koha-tmpl/intranet-tmpl/prog/js/vue/locales/en.json
npx vue-i18n-extract --vueFiles 'koha-tmpl/intranet-tmpl/prog/js/vue/**/*.?(js|vue)' \
--exclude koha-tmpl/intranet-tmpl/prog/js/vue/dist/main.js \
--languageFiles 'koha-tmpl/intranet-tmpl/prog/js/vue/locales/*.json' \
--add --remove
perl misc/translate_json.pl | sponge koha-tmpl/intranet-tmpl/prog/js/vue/locales/en.json
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The TooMany() function and fine calculation functions were incorrectly
hard coded to use homebranch for fetching the circulation rules. Those
ignored completely the syspref HomeOrHoldingBranch where the user
might have set it to holdingbranch and therefore the fines and whether
patron has too many checkouts (TooMany()) were counted using the
unintended branch's rules. This problem only arises in the cases where
there are branch specific circulation rules defined.
Test plan:
1. Make sure following tests pass:
$ prove t/db_dependent/Circulation/_CalculateAndUpdateFine.t
$ prove t/db_dependent/Circulation/TooMany.t
Test plan for fines.pl:
1. Add branch specific fine rules for branches A and B. A having a
fine of 1 per day and B having a fine of 0 per day.
2. Set sysprefs:
CircControl = the library the items is from
finesMode = Calculate and charge
HomeOrHoldingBranch = holdingbranch
3. Create an item with home and holding branch of A
4. Checkout the item with a due date in the past (the past due date can be
specified by clicking "Checkout settings" in the checkout page) and
make sure the branch you are checking from is B.
5. Run perl /usr/share/koha/bin/cronjobs/fines.pl
6. Notice that fines have popped up now to the patron incorrectly
7. Apply patch
8. Pay fines, Check-in the item and check it out again
9. Run perl /usr/share/koha/bin/cronjobs/fines.pl
10. Notice that fine is now 0. This means that the branch
B (holdingbranch of the checked-out item) specific rule is used.
Test plan for staticfines.pl:
1. Add branch specific fine rules for branches A and B. A having a
fine of 1 per day and B having a fine of 0 per day.
2. Set sysprefs:
CircControl = the library the items is from
finesMode = Calculate and charge
HomeOrHoldingBranch = holdingbranch
3. Create an item with homebranch A and holding branch of A
4. Checkout the item with a due date in the past (the past due date can be
specified by clicking "Checkout settings" in the checkout page) and
make sure the branch you are checking from is B.
5. Run perl staticfines.pl --library A --library B --category <PATRONS_CATEGORYCODE>
and notice that now there is inccorectly fines
6. Apply patch
7. Pay fines, Check-in the item and check it out again
8. Run perl staticfines.pl --library A --library B --category <PATRONS_CATEGORYCODE>
and notice the fines are now not generated
Rebased-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Petro Vashchuk <stalkernoid@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
- Run "perldoc misc/cronjobs/delete_patrons.pl"
- Note the absence of information about the potential conflict
between --not_borrowed_since and anonymization
- Apply this patch
- Re-run the perldoc command and make sure the note about
anonymization make sense
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We often get asked where something can be found in setting,
adding the hint that RealTimeHoldsQueue is a system preference
is hopefully helpful here.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The real time hold queue and the build_holds_queue.pl jobs are not 100% compatible in that we should not be running the cron if the real time queue is enabled, this could lead to double server work. It would be good to have a check in build_holds_queue for the RealTimeHoldsQueue syspref and not run the job if the preference is enabled.
There might be times when we'd want to force a run of this job without changing the syspref. To that end we would also want a flag for this job so that system administrators could force the job from the command line if required, overriding this limitation.
Test Plan:
1) Apply this patch
2) Try run misc/cronjobs/holds/build_holds_queue.pl with the -h/--help and -m/--man options
3) Disable RealTimeHoldsQueue
4) Run with no options, should succeed
5) Enable RealTimeHoldsQueue
6) Run with no options, should display a message and not rebuild the
holds queue
7) Run again with the -f/--force option, should succeed
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Like Bug 26832 added binmode UTF-8 to script misc/search_tools/export_elasticsearch_mappings.pl, this should be added to misc/cronjobs/runreport.pl.
Test plan :
1) Do not apply patch
2) Create a SQL report with :
SELECT 'accentué',barcode FROM items limit 3
3) Note the id of this report, for example 1
4) Run : misc/cronjobs/runreport.pl 1 --format csv | tee /tmp/without.csv
=> You see output with unknown character instead of é :
5) Run : file --mime-type /tmp/without.csv
=> You see : /tmp/without.csv: iso-8859-1
6) Apply patch
7) Run : misc/cronjobs/runreport.pl 1 --format csv | tee /tmp/with.csv
=> You see correct output with é
8) Run : file --mime-type /tmp/without.csv
=> You see : /tmp/without.csv: utf-8
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds background queue options to cleanup_database.pl to allow
for purging completed background jobs.
--bg-jobs DAYS Purge all finished background jobs this many days old. Defaults to 1 if no DAYS provided.
--bg-type TYPE What type of background job to purge. Defaults to "update_elastic_index" if omitted
Specifying "all" will purge all types. Repeatable.
To test:
1 - Enable elastic search in Koha
2 - perl misc/maintenance/touch_all_items.pl
3 - Generate an number of diffrent types of bg-jobs (eg batch_hold_cancel,
batch_biblio_record_deletion, batch_item_record_deletion)
4 - Check db and note there are a bunch of diffrent jobs
5 - Update to make them old
UPDATE background_jobs SET ended_on = '2022-10-01 00:00:00', status='finished'
6 - perl misc/cronjobs/cleanup_database.pl
7 - Note bg-jobs entry shows in help
8 - perl misc/cronjobs/cleanup_database.pl --bg-jobs 1 -v
9 - Note that elasticqueue would have been cleared
10 - perl misc/cronjobs/cleanup_database.pl --bg-jobs 1 -v --confirm
11 - Note that number of entries deleted is reported
12 - Attempt to clear other job types, including "all" eg
perl misc/cronjobs/cleanup_database.pl --bg-jobs 1 --bg-type batch_item_record_deletion -v --confirm
perl misc/cronjobs/cleanup_database.pl --bg-jobs 1 --bg-type all -v --confirm
13 - Confirm in staff interface that jobs are gone:
http://localhost:8081/cgi-bin/koha/admin/background_jobs.pl
(Uncheck 'Current jobs only')
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It would be nice to be able to combine several types in a single run,
but exclude others, without having to have multiple cron lines
Test Plan:
1) Apply this patch
2) Run process_message_queue.pl with a single -c parameter
3) Note behavior is unchanged
4) Run process_message_queue.pl with multiple -c parameters
5) Note all the codes specified are processed
6) Repeat 2-5 with -t for type limits
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Currenlty the output with -v from overdue_notices is a bit overwhelming and hard to parse
I do a few things here:
1 - Only show SQL if verbose > 1
2 - Add some separators to make it more readab;e
3 - Remove some redundant messages with branchcode and borrowernumber
To test:
1: perl misc/cronjobs/overdue_notices.pl -v
2: Notice you get a LOT of information all smushed together
3: Apply patch
4: perl misc/cronjobs/overdue_notices.pl -v
5: Less info, and easier to read
6: perl misc/cronjobs/overdue_notices.pl -v -v
7: All the info, but nicer to read
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
cleanup_database.pl cronjob has a typo in it's usage/help:
"preserve-logs" option should be "preserve-log" as it is everywhere
in the code.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This script had some oddities:
- There was a LEFT JOIN to subscription, but no error printed if no subscription
I changed this to a JOIN as there is a constraint, so this shoudl not happen
- Publisheddate was checked after the SQL, moved into query
- We checked for the next issue, and marked late only if that issue was already expected
This overruled grace period, which should be the mnarker for a serial being late
The grace period should be extended if you wish to wait for next issue
- If no next published date, we reported an error on the planneddate
- Script without confirm had no reporting
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Added command line ooption logging and completion logging where
cronlogaction was already imported. We should probably standardize all
cronjobs, but this is a start
One cron didn't log on confirm, likely we need to update all crons to log
if confirm, and possibly not log if running in test mode? Another bug as well
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch proposes a new standard for cronlogaction
We copy @ARGV into a space separated string, then pass this to
cronlogaction
At the end of the script we add a call with info "COMPLETED"
To test:
1 - Apply patch
2 - perl misc/cronjobs/advance_notices.pl -v -m 4 -n -c
3 - sudo koha-mysql kohadev
4 - SELECT * FROM action_logs WHERE interface="CRON";
5 - Note start and completion logged
6 - Note command line arguments included in info
If this looks good I will copy this pattern to the other cronjobs
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The overdue and pre-overdue cron scripts are not skipping the generation of phone notices. This causes many phone notices to be created that will always be left at 'pending' as the Talking Tech outbound script creates its own phone notices and puts them in the message queue.
Test Plan:
1) Enable Talking Tech
2) Enable predue and overdue notice phone transports for a patron
3) Generate overdues and predues, notice phone notices are generated
4) Apply the patch
5) Repeat steps 2-3
6) Note phone notices are not generated
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Some libraries don't want to auto-cancel holds, but we should not remind
a patron about a hold which has expired.
To test:
1 - Place a hold for a patron
2 - Set it waiting
3 - Run the holds reminder script in the future
perl misc/cronjobs/holds/holds_reminder.pl -day 1 --date '2023-09-12' -v
4 - Note the holds would be reminded
5 - Set expirationdate for the hold less than today
UPDATE reserves SET expirationdate = DATE_SUB(CURDATE(), INTERVAL 1 DAY);
6 - Run the remidner cron again
7 - No holds trigger!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This commit adds support for the concept of ILL request update notices.
- Adds a new Koha::Illrequest::SupplierUpdate class that is used to
encapsulate an update to a request, this update may come from a
supplier via a backend or from core ILL via, perhaps, a user action
- Adds a new Koha::Illrequest::SupplierUpdateProcessor base class that
can be subclassed in order to create a processor that can be passed an
update and act accordingly.
- Updates to Illrequest.pm to support the above classes and allow core
Koha to offer update processors
- A shell script to initiate a periodic process to check for updates
meeting given criteria and run the appropriate processors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
https://bugs.koha-community.org/show_bug.cgi?id=28909
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Lets stick to standard terminology and use categorycode rather than
usercode here.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes the script use an execution lock as provided by
Koha::Script. Previous attempt got too complex and contentious, and
given we have a simple way to achieve the same thing, I decided to
submit an alternative approach.
To test:
1. Apply this patch
2. Add the following content to misc/cronjobs/process_message_queue.pl
on line 83:
sleep 100;
3. Save the file
4. Have two terminals open
5. On the first one, run:
$ kshell
k$ misc/cronjobs/process_message_queue.pl
6. On the second one, run the same
=> SUCCESS: The second one dies telling it had to skip the run
7. Undo your changes:
$ git checkout misc/cronjobs/process_message_queue.pl
8. Sign off :-D
Sponsored-by: ByWater Solutions
Signed-off-by: Liz Rea <liz@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It's slightly debatable whether auto_too_soon is an error or not. I think
it leans far enough towards error that the other patch is correct. The change, however,
will affect notices and means we cannot count auto_too_soon anymore
This patch adds a new 'results' hash to the info - this includes a count per error
(including auto_renew i.e. success) allowing for notices to decide how to display the info.
To test:
1 - Add to Auto renew digest notice:
[% IF results %]
There were [% results.auto_too_soon %] items that were too soon.
[% END %]
2 - Check out some items to a patron that will be too soon
3 - Check out one that is not too soon and will renew
4 - Ensure patron has auto renew digest selected and that AutoRenewalNotices is set to follow patron preferences
5 - Run the auto renewals cron
6 - Confirm the notice for the patron displays 1 successful renewal, no failures, and a correct count of too_soon
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch prevents auto_too_soon errors being counted towards auto
renew errors.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In search_for_data_inconsistencies.pl when there are several inconsistencies on same framework, the second output of items contains the first one.
Looks like it is since Bug 21466
Test plan using koha-testing-docker :
1) Create 2 inconsistencies on the same item via SQL :
update items set itemlost = 9 where itemnumber=900;
update items set notforloan = 8 where itemnumber=900;
2) Without patch
3) Run ./misc/maintenance/search_for_data_inconsistencies.pl
=> You see duplicate output :
== Wrong values linked to authorised values ==
* The Framework *BKS* is using the authorised value's category *NOT_LOAN*, but the following items.notforloan do not have a value defined ({itemnumber => value }):
{900 => 8}
* The Framework *BKS* is using the authorised value's category *LOST*, but the following items.itemlost do not have a value defined ({itemnumber => value }):
{900 => 8} {900 => 9}
4) Apply patch
5) Run ./misc/maintenance/search_for_data_inconsistencies.pl
=> Fixed :D
== Wrong values linked to authorised values ==
* The Framework *BKS* is using the authorised value's category *LOST*, but the following items.itemlost do not have a value defined ({itemnumber => value }):
{900 => 9}
* The Framework *BKS* is using the authorised value's category *NOT_LOAN*, but the following items.notforloan do not have a value defined ({itemnumber => value }):
{900 => 8}
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch defaults to using "email" rather than "sms" notices
when AutoRenewalNotices is set to use the --send-notices cron switch
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Following bug 18532, one can set a patron's messaging prefs to deliver an auto-renew notice via SMS.
However, the auto_renewals cron only knows how to generate email notices. We should not allow the selection of non-functional transport types.
Test Plan:
1 - Set pref AutoRenewalNotices - 'according to patron messaging preferences'
2 - Set circ rule with:
Loan period: 5 days
No renewal before: 5
AutoRenewal: Yes
Renewals allowed: 5
3 - Set SMS Send driver to Email
4 - Find a patron and set them to receive auto renewal notices via SMS and no other transport
5 - Provide a proivder and sms number for the patron
6 - Checkout an item to the patron, set due date to yesterday
7 - Run auto renewals:
perl misc/cronjobs/automatic_renewals.pl -v --send-notices -c
8 - Item renewed, no message sent
9 - Check in item, checkout again due yesterday
10 - Apply patch
11 - Browse to Tools->notices and slips
12 - Edit AUTO_RENEWALS and AUTO_RENEWALS_DIGEST to copy email template to sms and add a title
13 - perl misc/cronjobs/automatic_renewals.pl -v --send-notices -c
14 - Item renewed, confirm patron has a notice in their account
15 - Check the digest option, check in item, checkout again as due, repeat cronjob and note digest notic
16 - sign off
https://bugs.koha-community.org/show_bug.cgi?id=30355
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
If an AV is linked to a MARC field mapped with a biblio column, the
search_for_data_inconsistencies.pl script might explode with
The method Koha::Biblioitem->title is not covered by tests!
Trace begun at /kohadevbox/koha/Koha/Object.pm line 875
Koha::Object::AUTOLOAD('Koha::Biblioitem=HASH(0x556b67fa7168)') called at misc/maintenance/search_for_data_inconsistencies.pl line 246
Test plan:
For a given framework, pick a biblio using it
Link 245$a with an authorised value category
Run the script
=> Notice that with this script applied you will see the warning
=> Without this patch you got the error
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Making the disabling utf8 flag explicit instead of depending on
the default of the CPAN module.
Incorporating the change in background_jobs_worker too.
Test plan:
See next patches when we look at unit tests.
Restart koha-worker.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes the script use the Koha::DateUtils tools instead.
To test:
1. Run:
$ kshell
k$ perl misc/cronjobs/batch_anonymise.pl --verbose --days 7
=> SUCCESS: You see (the date may vary):
Checkouts and holds before 2022-02-15 will be anonymised.
2. Apply this patch
3. Repeat 1
=> SUCCESS: Same output
4. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The Talking Tech outbound script currently just adds the
ReservesMaxPickUpDelay to the waiting date to calculate the
"expiration date", but it should use the actual hold expiration
date which may differ from this naive calculation based on
various system preference values.
Test Plan:
1) Create a holiday for tomorrow
2) Set ReservesMaxPickUpDelay to 5
3) Set "Days mode" to "Same week day"
4) Enable ExcludeHolidaysFromMaxPickUpDelay
5) Enable TalkingTechItivaPhoneNotification
6) Create a hold and fill the hold so it is waiting
7) Enable "Hold filled" phone notices for that patron
8) Create a 'phone' version of the HOLD notice
9) Run ./misc/cronjobs/thirdparty/TalkingTech_itiva_outbound.pl --type RESERVE -w 0
10) Note the output has the expiration date ( 15th colume ) 5 days from now which is *not* the hold's expiration date
11) Apply this patch
12) Repeat the command from step 9
13) Note the expiration date column now matches the holds actual expiration date!
Signed-off-by: Kyle Hall <kyle@bywatersolutions.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
System preference 'CSVdelimiter' has a special case for tabulation.
Preference value contains string 'tabulation' but string '\t' must be used in CSV file.
This is OK in many places, for exemple Bug 17590.
This patch adds C4::Context->csv_delimiter to add a uniq metod dealing
with this behavior.
Also create Koha::Template::Plugin::Koha->CSVDelimiter for calls from
Toolkit Templates.
Test plan :
1) Set system preference 'CSVdelimiter' = 'tabs'.
2) Create CSV export in impacted pages
3) Check columns are separated by tabulation character and not string 'tabulation'
4) Check with another delimiter
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Have a report containing:
SELECT tomascohen@theke.io;
2. Have a members notice containing ¡ and other non-ASCII characters.
3. Run (changing the report number and notice code accordingly):
$ kshell
k$ perl misc/cronjobs/patron_emailer.pl --report 4 \
--notice BIRTHDAY --from tomascohen@theke.io --module members
=> FAIL: non-ASCII characters are broken
4. Apply this patch
5. Repeat 3
=> SUCCESS: Things print correctly!
6. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The idea rely on the KohaDates TT plugin for the date formatting. We
should not have any output_pref calls in pl or pm (there are some
exceptions, for ILSDI for instance).
Also flatpickr will deal with the places where dates are inputed. We
will pass the raw SQL value (what we call 'iso' in Koha::DateUtils), and
the controller will receive the same value, no need to additional
conversion.
Note that DBIC has the capability to auto-deflate DateTime objects,
which makes things way easier. We can either pass the value we receive
from the controller, or pass a DT object to our methods.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Hum... Item2Marc ok here?
Bug 27272 is going to remove C4::Items::GetItemsInfo in favour of Koha::Items->search.
Here we are going to deal with misc/migration_tools/rebuild_zebra.pl
Test plan:
I am not sure, what do we want to test here? Items' info indexed
correctly?
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To reproduce:
$ perl koha/misc/admin/koha-preferences get MarcFlavour
This will output something like "HASH(0x55dd4d432840)".
To test:
Apply this patch and run the command again:
$ perl koha/misc/admin/koha-preferences get MarcFlavour
This should output something like "MARC21".
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Overdue emails are either sent from the issuing or the home
library of an item. We never use the patron's home library,
so the reply-to address must explicitly be set in EnqueueLetter.
To test:
- Set up 2 branches (A and B) with different email addresses.
- Set up an SMTP server for each to use
- Set up an overdue notice trigger for the patron category you'll use
First letter: 1 day delay, any notice
- Check out an item with home branch B to a patron from A
- Run the the script with:
overdue_notices.pl -t --frombranch item-homebranch
overdue_notices.pl -t --frombranch item-issuebranch
- Confirm for each setting that the correct email headers have been
used. You can see the reply-to address and to-address in the
message queue:
SELECT * FROM message_queue;
Signed-off-by: Nason Bimbe <nason.bimbe@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a section about the --since option in the help section
of borrowers-force-messaging-defaults.pl
To test:
0) Apply patch
1) run the script with the --help option, e.g.
./misc/maintenance/borrowers-force-messaging-defaults.pl --help
--> There should be an explanation of the --since option with examples
for specific and relative dates
2) Optionally, run the script with different options
--> The behaviour shouldn't have changed
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes a regex that discard lines in multiline YAML values
On close inspection, there is no need for it.
To test:
1) go to misc translator, update some language
./translate update fr-CA
2) check missing string
egrep "You may pick up your article" po/fr-CA-installer.po
from sample_notices.yaml
3) apply the patch, repeat 1)
4) repeat 2), verify the string is present in the translation file
5) translate the new string, install the language,
verify string is present in the translated file
./translate install fr-CA
check fr-CA/mandatory/sample_notices.yml
There are three new strings
msgid "%sDear %s %s,%s"
msgid "%s%s%sTitle: %s"
msgid "%sYou may pick up your article at %s.%sYou can download the scanned materials via the following url(s): %s.%s"
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch does what the title says.
To test:
1. Run the script
2. Check the action logs
=> FAIL: Boo, no record of the running cronjob
3. Apply this patch
4. Repeat 1-2
=> SUCCESS: Yay!
5. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Liz Rea <liz@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
There is a badly crafted regex used when extracting
strings in multiline fields in yaml files
The regex is my own, introduced in Bug 24262, sorry.
This patch correct it a little. Better eyes are welcome.
To test:
1) go to misc translator, update some language
./translate update fr-CA
2) check missing strings
egrep "Total out|Operator ID|August 31" po/fr-CA-installer.po
first two are from sample notices, third from sample creator data
3) apply the patch, repeat 1)
4) repeat 2), verify the strings are present in the translation file
5) translate some of the new strings, install the language,
verify strings are present in the translated files
./translate install fr-CA
check fr-CA/optional/sample_creator_data.yml and
fr-CA/mandatory/sample_notices.yml
There are some 60+ new strings.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Includes:
Bug 29697: (follow-up) Use flag embed_items
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
JD Amended patch:
-# FIXME Special case here
- print "Biblio not found\n,";
+ print "Biblio not found\n";
- my $biblio = Koha::Biblio->find($hostbiblionumber);
+ my $biblio = Koha::Biblios->find($hostbiblionumber);
Rebased-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
