Removed an uneeded semicolon from the end of an 'if' block. This should
not affect operation of the script.
Note: With Bug 13499 we did a non-destructive perltidy, as such we only
affected indenting and whitespace to maintain blame history. However, a
number of minor code issues were also highlighted, in this series of
patches I hope to correct other minor style issues.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This tidy should only change whitespace and not line breaks, thus
retaining history.
There are no code changes, and thus there should be no regressions to
test for koha wise.
To test the non-destrcutive nature of the patch, run a 'git blame -w' on
the file before and after the patch. The resulting blame should include
a comparabile history of the file, with only some additional blank
lines being attributed to this commit.
A 'git blame -wM' may also be useful for comparison purposes.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
[1] Arrange to have at least one loan in your test database due
one day from now.
[2] Run misc/cronjobs/advance_notices.pl -c -n -v -m=2
and note the number of loans reported.
[3] Apply the patch.
[4] Run misc/cronjobs/advance_notices.pl -c -n -v -m=2 again
and verify that the number of loans reported remains the same.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Also tested with unit tests from bug 10719.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This error only appears when using the SIPServer, it doesn't manifest when using the SIP unit tests
or when using the staff client.
--------------------
------------------
PREPARE THE TEST
------------------
--------------------
0a. Find a borrower.
0b. Find an Item (cardnumber 'debar123') and check-out to the borrower
0c. Find a borrower and add a manual debarrment to it, indefinetely in effect.
This is the default behaviour.
0d. Configure and start a SIP-server which you can access with telnet.
See http://wiki.koha-community.org/wiki/Koha_SIP2_server_setup
In this example, the Borrower defined as the Check-out/in machine has the following credentials:
username: herkules password: palautathan branchcode: JOE_JOE
but you are free to use your own, it doesn't affect this test plan.
0e. access your server with telnet
-----------------------
---------------------
REPLICATE THE ISSUE
---------------------
-----------------------
1. Paste the following SIP-command to login:
9300CNherkules|COpalautathan|CPJOE_JOE|
2. Paste the following SIP-command to check-in the Item of the debarred Borrower:
09N20140721 07501620140721 075016AP|AO|ABdebar123|AC|BIN|
3. The connection should die and in the SIP Server's error log you can find the following error:
Software error: Undefined subroutine &C4::Circulation::HasOverdues called at /home/koha/kohaclone/C4/Circulation.pm line 1925
--------------------
------------------
AFTER THIS PATCH
------------------
--------------------
Redo steps 1-2.
3. No error is given and the connection doesn't die.
No unit tests included and never will, because setting up the test environment would be very tedious.
It is entirely possible but the scaffolding required is beyond the scope of this patch.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Note: I did not test this patch with SIP, but I did not find any
regression on checking or renewing an item.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Completely get rid of warns.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test
Hit a url like
cgi-bin/koha/opac-authorities-home.pl?op=do_search&type=opac&operatorc=contains&marclistc=mainentry&and_orc=and&orderby=HeadingAsc&value=FIRECLAY
Notice the warns in the error log
Apply patch
Reload the url
Still works but no warns
(cherry picked from commit c98d805e490a82b2ea9f3d4e0f7278640942ba6d)
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Reformatted to fix error M Tompsett spotted
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Instead of 10 warnings, I now have only 4 warnings.
We're going in the right direction.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan:
git grep FormatData
should not return any result in pl and pm files.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This is empty (?)
Test plan:
git grep 'VirtualShelves::Merge'
should not return anything.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Rochelle <Rochelle_healy@hotmail.com>
http://bugs.koha-community.org/show_bug.cgi?id=12889
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This routine is not used and can be removed.
Test plan:
git grep GetLateIssues
should not return any result
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
TODO:: Somebody who knows what these are about could write some documentation about it.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
C4/Reserves.pm is unreadable with my vim configuration.
It appears I am the only one having this problem.
For an incomprehensible reason, a string constructs with
qq/my string/;
completely breaks the syntax color for all the rest of the file (~2300l).
If I replace it with
qq{my string};
all is fine!
Test plan:
launch
git show HEAD
and verify this patch won't break anything.
Additionally, prove t/db_dependent/Reserves.t
This will trigger the three functions that were modified.
The prove currently fails on test 8, but the other succeeding
tests prove that this change is fine.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests pass on my installation.
No problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
There is no need to encode strings coming from DB.
To reproduce:
go on admin/item_circulation_alerts.pl
The headers contain bad encoded characters.
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Newly introduced by patches from bug 10807, the string was decoded
before to be stored in session.
To reproduce:
Enable history search
Go at the OPAC and log out
Search for something with utf-8
Go on your search history
The search description should be correctly encoded
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The password should be encoded before hashing.
Test plan:
- Before applying the patch, create a user with utf-8 in password
- apply patches
- try to log in
- change the password
- log out
- try to log in
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The search patch should fix non-latin character searches.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
We don't need to decode manually which provide nice performance boost.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To reproduce, edit, index notice with utf-8 char and search for it
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test on preferences.pl and on some others pages when mysql is used to
store session.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
See the wiki page for the explanation.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch
- removes all html_entity usages in tt file which hide utf8 bugs
- removes all encode utf8 in tt plugins because we should get correctly
marked data from DBIC and other sources directly (cf plugin EncodeUTF8
used in renew.tt)
- adds some cleanup in C4::Templates::output: we now use perl utf8 file
handler output so we don't need to decode tt variables manually.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When only the card number is passed to GetMemberDetail, the
value of $borrowernumber is undefined. Even after finding the
correct borrower and providing a nice hash ($borrower), the
GetMemberAccountRecords is called with the wrong borrower number,
even though it is in the hash ($borrower).
This was fixed by changing $borrowernumber to
$borrower->{borrowernumber}, so that the hash's value will always
be used, since it is correct regardless of whether borrowernumber
or cardnumber were used to find the borrower.
TEST PLAN
---------
1) Apply both patches
2) prove -v t/db_dependent/Member.t
-- This time the previously failing test will pass.
3) run koha QA test tools.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan:
git grep GetParcel
should not return use of this subroutine.
Signed-off-by: wajasu <matted@34813.mypacks.net>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a "None" option for the fund filter.
Test plan:
1/ Go on the suggestion search page
2/ Search suggestions not linked to a fund using the "None" option.
3/ Search all suggestions (linked or not to a fund) using the "Any" option.
Works as expected.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
1. Upgrade PDF::Reuse to 0.35_04. [1]
2. Run Koha's non-DB dependent test suite. You should notice some non-fatal warnings about
the redefinition of one or two subs in PDF::Reuse. This should not affect the
functionality of the tools for the end user.
3. Verify the functionality of the related tools.
4. Apply the attached patch.
5. Re-run Koha's non-DB dependent test suite. You should note no warnings related to PDF::Reuse.
6. Re-verify the functionality of the related tools.
[1] http://search.cpan.org/CPAN/authors/id/C/CN/CNIGHS/PDF-Reuse-0.35_04.tar.gz
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Chris <chris@bigballofwax.co.nz>
http://bugs.koha-community.org/show_bug.cgi?id=13407
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Nice one! I only corrected the bug number in the subject.
An item can be marked as lost by longoverdue.pl, but left checked out to
the patron. In this case, the item will continue to accrue fines.
Test Plan:
1) Check out an item and back date it so it is overdue and should
generate fines.
2) Mark the item as lost by either using longoverdue.pl, or just
by setting itemlost to 1 by directly accessing the database
3) Run fines.pl
4) Note the overdue generated a fine
5) Repeat steps 1-2
6) Apply this patch
7) Run fines.pl
8) Note a fine was not generated
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a new subroutine populate_order_with_prices in the
C4::Acquisition module.
Its goal is to refactore the VAT and prices calculation into Koha.
All scripts will use this subroutine.
Test plan:
Verify that the prices in t/Prices.t are consistent with the values
listed in the file "Prices and VAT calculation - before" submit on bug
12964.
Verify that
prove t/Prices.t
returns green
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If only 1 item exist in the message, the marker is not removed.
This marker is removed by render_metadata, but this method is only
called on appending.
Test plan:
1/ Enable the CHECKIN and/or CHECKOUT notices for a patron
2/ check and item in or out and verify that the marker is no longer
displayed in the generated notices.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If the ISBN of a UNIMARC record begins with 979 then the 'Stage MARC for
import' hangs. If I use the same UNIMARC record and change 979 to 978 in the
ISBN, 'Stage MARC for import' works perfectly.
The patch deals with the fact that converting an ISBN-13 to ISBN-10 with
Business::ISBN as_isbn10() method fails if the ISBN doesn't begin with 978.
TEST PLAN:
(1) Download, and decompress the ZIP file attached to BZ.
(2) On a UNIMARC Koha instance, go in Tools > Stage MARC for import.
(3) Choose the MARC file containing the record with an ISBN begining with 979.
Click on Upload file, then Stage to import.
(4) The Job progress bar stay at 0%.
(5) Apply the patch. Repeat steps 2-3. The upload works.
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Tested in a UNIMARC installation, confirmed that the patch fixes the
problem.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The C4::Acquisition module should be exploded in order to add
readability and maintainability to this part of the code.
This patch is a POC, it introduces a new Koha::Acquisition::Bookseller module and put in
it the code from GetBookSeller and GetBookSellerFromId.
Test plan:
1/ Create a bookseller, modify it.
2/ Add contacts for this bookseller
3/ Create an order, receive it, transfer it
4/ Launch the prove command on all unit tests modified by this patch and
verify that all pass.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test
1/ Create a borrower with '' as their userid, you may have to edit a
row in the db to do this
2/ Run perl t/db_dependent/Circulation/CheckIfIssuedToPatron.t
3/ Notice some tests fail and you see
DBD::mysql::st execute failed: Duplicate entry '' for key 'userid'
at /home/chrisc/git/catalyst-koha/C4/SQLHelper.pm line 184.
4/ Apply the patch
5/ Run the tests again, notice they now pass
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- $data{'userid'} = Generate_Userid($data{'borrowernumber'},
$data{'firstname'}, $data{'surname'}) if $data{'userid'} eq '';
+ $data{'userid'} = Generate_Userid( $data{'borrowernumber'},
$data{'firstname'}, $data{'surname'} )
+ if ( $data{'userid'} eq '' || Check_Userid( $data{'userid'} ) );
Check_Userid returns 1 if it is unique. So this means unique userids
will always be discarded and new ones created.
This is why all the tests depending on a userid are now failing
To test
1/ run perl t/db_dependent/Serials_2.t
2/ Notice lots of tests fail
3/ OR Add a borrower with a userid set, notice the userid is ignored
and one is generated instead
4/ Apply patch
5/ Add a new borrower, notice the userid sticks (if it is unique)
6/ Run perl t/db_dependent/Serials_2.t notice tests pass
7/ Run perl t/db_dependent/Members.t notice tests still pass
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The SIP config has allowed you to specify an interface ip as
part of the listeners/service/port attributei
e. g. as port="127.0.0.1:6001/tcp"
with IPv6 the equivalent would normally be
as port="[::1]:5001/tcp"
However in this case incoming connections will get rejected because
Configuration constructs a string without the brackets
This patch makes tests both formats on incoming connections so that
they are accepted as they were previously
In future the best course is not to include a port identifier in the
port definition then if the server has ipv6 it will bind to all
interfaces and accept both IPv4 and IPv6 traffic
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This small patch adds a check on the SIP2 socket connection if it is
IPv6 and resolves socket address accordingly.
Any newer Debian distro would probably default to IPv6 so it would
eventually affect all SIP servers.
Tests against running SIP server on an IPv6 box:
http://wiki.koha-community.org/wiki/Koha_SIP2_server_setup#Testing_with_Telnet
before patch:
disconnects immediately. Log output:
Bad arg length for Socket::unpack_sockaddr_in, length is 28, should be 16
after patch:
operates normally
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
One day late patrons were restricted even with dropbox mode activated
1) Check in the calendar (Tools/Calendar), that the
previous days you are about to use as date due are
really entered as opening day (never know).
2) Add a suspension in the suspension days parameter
of the circulation rules (Administration/Circulation
and fine rules) to the MOST specific category of
borrower and MOST specific type of document among the
existing rules of the LOGGED IN Site(cf explications
in the circ-rules page).
3) Choose a borrower using the search by category and an
item through the advanced search using the limit by type.
4) Checkout the item selecting the previous opening date
in the Specify-due-date box.
5) Click on Circulation in the upper menu, then on Checkin
and check the Book drop mode. The Book drop date showed
should be the previous opening date.
6) Check in the item : you can see that the patron is restricted
7) apply the patch
8) Redo 1 to 5 : Now, you can see that the patron is not restricted.
9) If you redo the test with two day late, you will see that
the patron is not restricted : that's ok because his
restriction of one day is already finished.
10) If you redo the test with more than two day late, you see
that the patron restriction is, as expected, one day shorter
than it were if the item had been returned without dropbox mode.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test Plan ( using sample data included with Koha )
1) Catalog a record and item with the title "Oh no! or, (How my
science project destroyed the world) /"
2) Edit the DEFAULT template
a) Set layout type to Biblio
b) Set data fields to "title, author, isbn, issn, itemtype,
barcode, itemcallnumber"
c) Set font size to 10
3) Create a batch with just the one item you created
4) Export the PDF with the Avery template and the DEFAULT layout
5) Note the weirdness
6) Apply this patch
7) Re-export the PDF, note it's no longer weird ; )
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch only fixes the KW order.
Test plan:
1/ Choose/create a record with several 6XX (for KW), see the code source
to know which fields you can use
2/ Export this record in RIS format
3/ Verify that the KW lines are ordered following the marc record fields
order.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
We really should refactor this whole thing into Koha::RIS sometime, it's
a horrible module at the moment.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Check_Userid assumes that a borrowernumber will always be passed in
and thus fails to to return 0 for an already used userid when creating
a new patron.
Unit tests must now also me modified to no longer assume it is possible
to create multiple patrons with the same userid.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
- Check RentalFeesCheckoutConfirmation is activated
- Try to check out an item without rental fine
- Verify confirmation message without explanation
is shown
- Apply patch
- Verify confirmation message is no longer shown
- Configure itemtype to have rental fee
- Veirfy now the confirmation message appears as
it should
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
I would prefer not to hide this "stuff".
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When using a z3950 connexion with UNIMARC authorities, you get an error :
Unsupported UNIMARC character encoding [ ] for XML output for UNIMARCAUTH; 100$a -> 20141119
I've seen thant Bug 2060 when adds authorities import adds a special behavior for UNIMARC : marc flavor must be UNIMARCAUTH instead of just UNIMARC.
This patch adds the same behavior when using z3950 connexion and import.
Test plan :
- Use a UNIMARC install
- Define a z3950 connexion for UNIMARC authorities
- Go to Authorities module
- Click on "New from Z39.50"
- Perform a search
=> Without patch : you get the error
=> With patch : you get results
- Import one result
=> You get the authoritie creation form with all datas
You may check same plan with MARC21 install
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
NOTE: depending on the target, the syntax in the configuration
might not be UNIMARC, but MARC21/USMARC instead!
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This is introduced by Bug 12874.
Without this patch, it's not possible to clear (set to an empty string)
an item field.
This appended for field linked to an AV list but even if it's not.
The regex tried to prefix 'my_field' with 'items.' to have
'items.my_field'. It wanted to take care of the case where the prefix
already exists (Actually only 1: 'items.cn_source').
The regex is changed to: "add the prefix only if the string does not
contain a dot".
Moreover an ambiguity existed on the prefix: in marc_subfield_structure,
the kohafield is prefixed, but not in the key of the hash sent to
ModItemFromMarc.
Test plan:
- edit an item, set a status that is controlled by an authorized value
examples tested: damaged, not for loan
- check the status saved correctly
- edit the item again, reset the status to empty
- check the status saved correctly
- edit the item again, reset fields, edit fields
- check the fields saved correctly
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To avoir further issue, it's better to explicitely list the fields we
want to retrieve.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch moves the publisher information out of its own
always empty column into the Summary column below the title,
as it is on other acq pages.
The information was never displaying, as publishercode is in
biblioitems and that table was not selected by GetInvoiceDetails.
Also modified the code to take into account that UNIMARC uses
biblioitems.publicationyear and MARC21/NORMARC use bibio.copyrightdate
for the copyright year.
To test:
- create an invoice for records that
- have a publication year
- have no publication year
- have a publisher...
- 'finish receiving' and check the invoice summary page
...acqui/invoice.pl?invoiceid=?
- Make sure all the information displays now but didn't witout the patch.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To Test
1/ Create 3 (or more holds) on one biblionumber, make sure at least
one item is not on loan
2/ Check out the not on loan item to a borrower (maybe number 2 in the
queue)
3/ Look in the database (or on the holds tab on the moredetail.pl)
notice the priorities have not been reordered
4/ Apply patch and try again, notice now they have
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Confirmed the problem without the patch, and confirmed that the patch
corrects it.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
GetHistory iterated on the orders to calculate the quantity and price.
These values are never used by the called.
It can be removed.
Test plan:
Verify there is no regression on acqui/histsearch.pl and
catalogue/detail.pl
Actually you just have to check that the total quantity and price are
not displayed on these views.
QA: note that 'count' and 'toggle' are never used in the template.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Minor code tidy to clean up qa script warning.
http://bugs.koha-community.org/show_bug.cgi?id=9165
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
A small enhancement to clear existing synced passowrd should this
config option be enbled. This followup is related to bug 12831
http://bugs.koha-community.org/show_bug.cgi?id=9165
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This adds a configuration option to LDAP that prevents it from storing
user's passwords in the local database. This is useful when users of
hosted Koha wish to prevent any form of offsite password storage for
security reasons.
Notes:
* if the option is not included in the koha-conf.xml file, then the
current default behaviour of saving the password locally is retained.
* this has no impact on passwords that are already in the database.
They will not be erased.
To use:
* edit the koha-conf.xml for a system that uses LDAP for
authentication.
* in the <ldapserver> configuration, add:
<update_password>0</update_password>
* feel a greater sense of security.
To test:
1) have a Koha system that authenticates using LDAP.
2) note that when a user logs in, their password is saved (hashed) in
the database.
2.5) it is important to note that, for whatever reason, a user's
password is not stored on a login where their account is created,
only when they log in after being created. Thus perhaps log in and
log out a couple of times to be sure.
3) add the <update_password>0</update_password> option to the
<ldapserver> section of koha-conf.xml.
4) login with a new user (or erase the password from the database for
an existing user) and note that the password field is not populated.
5) log out and log back in just to be sure, check the password field
again.
Sponsored-By: National Institute of Water and Atmospheric Research (NIWA)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Local only logins should continue to function when LDAP is enabled.
This was not the case after bug 8148 [LDAP Auth should FAIL when ldap
contains a NEW password]. For this case, we need to diferentiate
between local accounts and ldap accounts. This is somewhat challenging
and thus this patch is only part of the story.
The other half can be achieved with bug 9165
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch fixes a major issue introduced by the
commit 5c4fdcf Bug 11742: A letter code should be unique.
The interface should let the possibility to create a default template
letter and some specific ones, with the same letter code (letter.code).
The patches submitted on bug 11742 tried to fix an issue based on a
(very bad) assumption: letter.code should be considered as a primary key and
should be uniq.
This patch reintroduces this behavior.
Note that the interface will block a letter code used in different
module (this is consistent not to have the same letter code used for different
needs).
This patch is absolutely not perfect, it just tries to change as less
change as possible and to use new tested subroutines.
Test plan:
1/ Verify that the problem raised on bug 11742 does not appears anymore.
2/ Verify there are no regression on adding, editing, copying, deleting
letters.
3/ Verify you are allowed to create a default letter template with a letter
code and to reuse for a specific letter (i.e. for a given library).
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
These 2 bugs are in conflict.
The first one always join the issue table, the second one join on this
table too if the OnSiteCheckouts pref is enable.
So DBI raises an error if the pref is enabled (2 joins on the same
table).
This patch removes the conditional join.
Test plan:
Go on a detail record page with items and verify that items are list and
that the error no more appears in the log file.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Reproduced the problem, the patch fixes it, no noticeable regression found.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, items are visible again.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If a library is using Talking Tech for phone notices, any waiting hold
phone notice will show up twice!
This is because Koha generates on at the time the hold is set to
waiting, and then the cronjob TalkingTech_itiva_outbound.pl generates
it's own notice as well.
The former notice will always have a status of 'pending', as the
TalkingTech_itiva_inbound.pl script will update the notice the outbound
script created.
The solution is to prevent Koha from creating a phone notice for waiting
holds if TT is enabled, and let the cron script do it.
Test Plan:
1) Enable Talking Tech from the system preferences
2) Set a hold waiting phone notice in the notices and slips editor
3) Choose a patron, enable hold phone notices for that patron
4) Place a hold for a patron, and check it in so it's marked as waiting
5) Note the phone notice generated for the patron
6) Apply this patch
7) Repeat step 4
8) Note that this time, a phone hold waiting notice is not generated
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Amends condition with an additional or statement. Shoudn't affect
anything but phone notices. Change appears logical.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Without patch:
-------------
Make payment for patron who has fines
Select the Pay Amount button and add a note in the note box.
Select confirm
Result: The note does not display in list
With patch:
----------
Result: The note displays in list
Bonus testing: The note is included in system logs as well (Home:Tools:Logs)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If you use a claimissue notice to claim serials, the generated letter
will be
<order>Title1, Author1</order>
<order>Title2, Author2</order>
...
<order>TitleN, AuthorN</order>
This patch geds rid of these tags.
Test plan:
1/ Create a claimissue notice with something like:
<<LibrarianFirstname>>
<<LibrarianSurname>>
The following issues are in late:
<order><<biblio.title>>, <<biblio.author>> (<<biblio.serial>>)</order>
2/ Generated late serial issues.
3/ Send notifications to vendor.
4/ The order tags should not exist anymore in the sent email.
You can see bug 5342 for a more detailled test plan.
Note for QA: This should have been done in GetPreparedLetter, but I did
not find a better way to do.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described. Tested having the <order> tags on one line
and also for a multi-line layout.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Fix a typo. Not test plan required, just a look at default UNIMARC framework.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
According to the manual, "Items will stay in the PROC location until
they are checked in".
This is not the actual behavior. Right now items will only change from
PROC to CART, and that is only if InProcessingToShelvingCart is enabled.
Some libraries want to use the PROC to permanent location feature,
without using the CART.
Additionally, the location is only removed if using returns.pl, but
that is not what the manual says either. What if the library uses
SIP2 devices for handling returns? This should be taken into
account.
Test Plan:
1) Apply this patch
2) Set an item's current location to PROC, and it's permananet location
to a different location.
3) Check the item in any way you wish
4) Note the shelving location is updated to the permanent location
5) prove t/db_dependent/Circulation/Returns.t
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I tested this with items which had items.location set to 'PROC' and
items.permanent_location set to NULL, '', and a real value, and it
worked correctly in all cases. I tested with check-ins from returns.pl
and from the table of checkouts in circulation and the PROC location was
correctly removed in both cases.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
You may define in config a folder (usually /tmp) for TT cache :
template_cache_dir in etc/koha-conf.xml.
Some perl pages may be launched from commandline, like tools/export.pl.
Also, the script gather_print_notices.pl uses C4::Templates.
The problem is that when script is launched from Apache, the Unix owner of cache files will be www-data. When script is launched from commandline, like in a cronjob, the Unix owner will be different (like a user named "koha"), causing a crash because cache files can only be read by its owner.
This script disables the template cache if perl script is called from commandline. This cache is certainly only useful for web access.
Using GATEWAY_INTERFACE env var comes from tools/export.pl
Test plan :
- Use a dev install of koha installed in a user home, ie "/home/kohadev"
- Define a folder for template_cache_dir in etc/koha-conf.xml. For example : <template_cache_dir>/tmp</template_cache_dir>
- Check there is no cached templates already in this forder
- Create a file "bib.list" containing a few existing biblionumbers
- As user kohadev, launch : tools/export.pl --record-type=bibs --id_list_file=bib.list
- Look at cache folder
=> Without patch you see cache files owned by user kohadev
=> With patch there are no cache files
- Use the Koha interfaces OPAC and Intranet
=> Without patch you get an error : Template process failed: file error - cache failed to write ...
=> With patch you have no error and cache files are generated with Apache user as owner
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, good test plan!
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No commit message
No test plan.
No regressions found on opac/staff item display
No improvements either, but could be just my test data
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Passes tests and QA script.
Tested detail and item pages in OPAC and staff, no regressions found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 2546 removes the description DB field value in some case (3.15.00.003).
But the receipt generated by scripts members/printfeercpt.pl and
members/printinvoice.pl displays this field.
When the description field is empty, the default value (based on
accountlines.accounttype) should be displayed.
Test plan:
- Generate and pay some different kinds of fees for a patron without
filling the 'description' field.
- In Fines>Account, click on the 'print' link.
- Before this patch, the "description of charges" values is empty if no
description was given.
It is a regression introduced by bug 2546, a default value was
inserted in the description field depending on the account type
selected.
- After this patch, the "description of charges" values should be based
on the account type. The string display on printing receipt should be
the same as on the account screen (staff and opac).
Note for QA: If removed the "payment" key, it is not used in template
and generated a warning ("odd number of elements...").
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This fixes the display of payments and other charges on the
fines slip.
Note: This patch fixes a line where the description in the
database was still updated to say "Payment thanks" for partial
payments. It might be worth to do a follow-up correcting the
accountlines table and removing the unwanted comment (see bug 2546).
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch simplifies the SQL query in Letters.pm for table
borrower_modifications.
It also addresses the only case this query is used in opac-memberentry.
An unused variable in Letters.pm is removed.
Test plan:
Enable selfregistration on opac.
Set verification by email to required in prefs too.
Self-register two new users.
Check the email notices generated.
Verify the new users with the tokens in their notice.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Much cleaner SQL
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Cleaner and works as described, no regressions found.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
In inventory results, CSV or screen, the item withdrawn information is missing.
This information can be usefull to understand why an item was not scanned.
Test plan :
- Check you have in default framework an item subfield mapped with items.withdrawn
- Create a biblio with default framework
- Create an item with barcode='000AAA1', callnumber='ZZZAAA1' and withdrawn=0
- Create an item with barcode='000AAA2', callnumber='ZZZAAA2' and withdrawn=1
- Go to inventory tool : /cgi-bin/koha/tools/inventory.pl
- Enter item callnumber between 'ZZZ' and 'ZZZZ'
- Submit
=> You see a column 'Withdrawn' with withdrawn value
- Go to inventory tool : /cgi-bin/koha/tools/inventory.pl
- Enter item callnumber between 'ZZZ' and 'ZZZZ'
- Check 'Export to CSV file'
- Submit
- Open exported file
=> You see a column 'Withdrawn' with withdrawn value
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Modified:
C4/Letters.pm - remove aqbooksellers.* from SELECT statement
In Letters - SendAlerts subrotine, is safe to remove aqbooksellers.* from SELECT statement
for type=claimacquisition or claimissues. Aqbooksellers is passed to GetPreparedLetter subrotine in tables variable.
Testing:
I Apply the patch
Select Tools -> Notices and slips;
Edit ACQCLAIM;
Add :
<order>Ordernumber <<aqorders.ordernumber>> (<<biblio.title>>) (<<aqorders.quantity>> ordered) ($<<aqorders.listprice>> <<aqbooksellers.listprice>> each) has not been received.</order>
Save modifications;
Create a vendor (Acquisition module);
Create an order (Acquisition module);
Click Acquisitions -> Late orders;
Select the order created;
Click Claim order button;
Valide <<aqorders.listprice>>;
Valide <<aqbooksellers.listprice>>.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described. It's now possible to output the actual price
in the claim notice.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If no order is selected on the acq claim page when clicking
'Claim order' an ugly perl error message is displayed.
This patch corrects the behaviour to display a human readable
'No order selected'
instead.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Reworded commit message to reflect what the patch achieves.
Works as described and passes tests.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a better check in message for patrons with indefinite restriction.
To test:
Check out an item to a patron.
Add a manual restriction without expiry date to that patron.
Check in the item.
Without patch, the checkin message reads:
Reminder: Patron was earlier restricted until 9999-12-31
Apply patch and repeat steps above.
The message should now read:
Reminder: Patron has a restriction (no expiry date)
NOTE: Changed wording at two places following Owen's suggestion. New: "Patron
has an indefinite restriction"
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Thanks Marc for catching this case. I was thinking like you that the wording
sounded strange while playing with bug 13242. Merge the original patch and the
followup, containing a better wording, thanks to Owen comment.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
TO REPLICATE:
Prepare a bunch of Items (6+) for checking out, or have a set of barcodes ready for copy-pasting.
Check-out those items quickly within one minute and observe that the sorting order is not always from the first checkout to the last.
This is because the issuedate doesn't have seconds defined.
AFTER THIS
The bunch of Items is sorted properly.
Tiny patch, works as expected. Passed QA script.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This fix is a global fix for the MarcModificationTemplate feature.
Some unit tests were missing and some behaviors were wrong.
For instance, if you tried to update a non existent field, the script
crashed.
The following line was completely stupid:
if $from_field ne $to_subfield
The field_number equals 1 if the user wants to update the first field
and 0 for all fields.
The field_numbers (note the s) variable contains the field numbers to
update. This array is filled if a condition exists (field exists or
field equals).
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Make sure the ModifyRecordWithTemplate routine returns undef.
This patch also removes a warning if GetModificationTemplates is called
without parameter.
Verify
prove t/db_dependent/MarcModificationTemplates.t
returns green.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch series is a bugfix for the Marc modification templates tool.
Bug description:
If you want to do an action (delete/update/move/...) on a multivalued
field and if a condition is defined on the same field, it is highly
probable the resulted record will not be what you expect.
For example:
Deleting All (or the first) fields 650 if 245$a="Bad title" works with
the current code.
BUT if you want to delete All (or the first) fields 650 with a condition
on 650$9=42, and if at least one field matches the condition :
- if you have selected all, all fields 650 will be deleted, even the
ones who do not match the condition.
- if you have selected first, the first 650 field will be deleted, even
if it does not match the condition.
The expected behavior is to delete the fields matching the
condition (and not all the 650 fields).
What this patch does:
This patch introduces 2 changes in the logic of Koha::SimpleMARC.
The first change is a change of the prototypes for the 2 routines
field_exists and field_equals. Now they return the "field number" of the
matching fields.
The second change is the type of the "n" parameter for all routines
using it in Koha::SimpleMARC. Before this patch, the "n" parameter was a
boolean in most cases. If 0, the action was done on all fields, if 1
on the first one only. Now it is possible to specify the "field numbers"
(so the array of field numbers which is returned by field_exists or
field_equals) for all routines which had the n parameter.
Test plan for the patch series:
Note: This test plan describes a specific example, feel free to create
your own one.
0/ Define a marc modification template with the following action:
Delete field 245 if 245$9 = 42
1/ choose and export a record with several 245 fields.
For ex:
245
$a The art of computer programming
$c Donald E. Knuth.
$9 41
245
$a Bad title
$c Bad author
$9 42
2/ import it using the Stage MARC for import tool.
3/ verify the imported record does not contain any 245 field.
4/ apply all the patches from this bug report
5/ do again steps 2 and 3
6/ verify the imported record contains only one 245 field, the one with
245$9=41
7/ verify the unit tests passed:
prove t/SimpleMARC.t
prove t/db_dependent/MarcModificationTemplates.t
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
DateTime::Format::DateParse (called in Koha::DateUtils::dt_from_string)
does not manage to parse 9999-12-31 if a time zone is given.
my $date = DateTime->new(year => 9999, month => 12, day => 31);
=> OK
DateTime::Format::DateParse->parse_datetime( '9999-12-31' );
=> OK
DateTime::Format::DateParse->parse_datetime( '9999-12-31',
'America/Los_Angeles' );
=> KO (~20sec on my laptop)
It should not be considered as a valid date when the letter is parsed.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Note that to reproduce the problem you much be checking in items from an
account which has been restricted indefinitely (either manually or by
the overdues process). With this patch such checkins go from taking
around 50 seconds (in my test system) to around 7 to 10 seconds.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Good catch! Works as described, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
1) Be more careful when checking the NorwegianPatronDBEnable syspref.
Before:
if ( C4::Context->preference('NorwegianPatronDBEnable') == 1 ) {
After:
if ( C4::Context->preference('NorwegianPatronDBEnable') && C4::Context->preference('NorwegianPatronDBEnable') == 1 ) {
This should avoid complaints if the syspref is not initialized.
2) Fix some empty =head2 POD sections
3) Fix some indentation in patrons.pref, to make xt/yaml_valid.t happy
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
I couldn't find any regressions with adding, editing and deleting members.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The QA script was complaining about some dodgy POD in C4/Members.pm,
that was not introduced by bug 11401. This patch fixes the POD, to
keep the QA script happy.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch makes it possible to sync patron data between Koha and the
Norwegian national patron database, in both directions.
In order to use this, the following information is necessary:
- a username/password from the Norwegian national database of libraries
("Base Bibliotek"), available to all Norwegian libraries
- a special key in order to decrypt and encrypt PIN-codes/passwords,
which is only available to Norwegian library system vendors
- a norwegian library vendor username/password
See http://www.lanekortet.no/ for more information (in Norwegian).
While this is of course an implementation of a specific synchronization scheme
for borrower data, attempts have been made to prepare the ground for other sync
schemes that might be implemented later. Especially the structure of the new
borrower_sync table might be reviewed with an eye to how it might fit other
schemes.
To test:
Since the password and cryptographic key needed to use this functionality
is only available to Norwegian library system vendors, only regression testing
can be done on the submitted code. Suggested things to check:
- Apply the patch and make sure the database update is done. This should add
the new "borrower_sync" table and five new systmpreferences under the
"Patrons" > "Norwegian patron database" category:
- NorwegianPatronDBEnable
- NorwegianPatronDBEndpoint
- NorwegianPatronDBUsername
- NorwegianPatronDBPassword
- NorwegianPatronDBSearchNLAfterLocalHit
- Check that patrons can be created, edited and deleted as usual, when
NorwegianPatronDBEnable is set to "Disable"
- Check that the new tests in t/NorwegianPatronDB.pm run ok, e.g. on a
gitified setup:
$ sudo koha-shell -c "PERL5LIB=/path/to/kohaclone prove -v t/NorwegianPatronDB.t" instancename
- Check that all the other tests still run ok
- Check that the POD in the new files itroduced by this patch looks ok:
- Koha/NorwegianPatronDB.pm
- members/nl-search.pl
- misc/cronjobs/nl-sync-from-koha.pl
- misc/cronjobs/nl-sync-to-koha.pl
- t/NorwegianPatronDB.t
Sponsored-by: Oslo Public Library
Update 2014-09-18:
- Rebase on master
- Split out changes to Koha::Schema
- Incorporate new way of authenticating with NL
Update 2014-10-21:
- Rebase on master
- Use Module::Load to load Koha::NorwegianPatronDB in non-NL-specific
scripts and modules
- Fix the version number of Digest::SHA
- Fix a missing semicolon in kohastructure.sql
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Calls to C4/Charset.pm's NormalizeString function with an
undefined string were triggering warnings when running:
prove -v t/db_dependent/Holds.t
Sadly, t/Charset.t was also lacking calls to NormalizeString.
TEST PLAN
---------
1) prove -v t/db_dependent/Holds.t
-- This should generate the uninitialized string warnings.
Make sure CPL and MPL are in your branches to save
yourself from headaches due to expected data.
2) cat t/Charset.t
-- note there are no function calls to NormalizeString.
You can see other shortfalls in the tests beyond
NormalizeString with: grep ^sub C4/Charset.pm
3) prove -v t/Charset.t
4) Apply patch
5) prove -v t/Charset.t
-- Run as before with more tests.
6) cat t/Charset.t
-- note there are now function calls to NormalizeString.
7) prove -v t/db_dependent/Holds.t
-- Nice and clean run! :)
8) koha-qa.pl -v 2 -c 1
-- all should be Ok.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Removes this warning: Use of uninitialized value $template_id in string eq
at C4/MarcModificationTemplates.pm line 84.
GetModificationTemplates has no template_id if called from
marc_modification_templates.pl without operation (first click from
interface) and from tools/stage-marc-import.pl.
Slightly adjusted the POD lines accordingly.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
In order to avoid a long list of parameters, it should be better to
pass all of them into a hashref.
This patch does not add or modify a behavior.
Test plan:
Verify the unit tests still pass
- prove t/SimpleMARC.t
- prove t/db_dependent/MarcModificationTemplates.t
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The current holds behavior in Koha allows a situation like this:
- Patron A has an item currently checked out.
- Patron B places a hold on the next available copy of that title.
- Then Patron A will not be able to renew his item, even if there are
other available copies of that title that could potentially fill Patron
B's hold.
Since this seems unfair to Patron A, we should allow renewal of items
even if there are unfilled holds, but those holds could all be filled
with currently available items.
Test Plan:
1) Apply this patch
2) Create a record with two items
3) Check out the item to a patron
4) Place a hold on the record
5) Note you cannot renew the item for the patron
6) Enable the new system preference AllowRenewalIfOtherItemsAvailable
7) Note you can now renew the item, as all the holds can be satisfied
by available items.
8) Place a second hold on the record
9) Note you can no longer renew the item, as all the holds *cannot*
be filled by currently available items
Signed-off-by: Holger Meissner <h.meissner.82@web.de>
Signed-off-by: Chris Rohde <crohde@roseville.ca.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch changes the way CanBookBeReserved() and CanItemBeReserved() return error
messages and how they are dealt with in the templates. This change makes it possible
to distinguish between different types of reservation failure.
Currently only two types of errors are handled, all the way to the user, from the CanItemBeReserved():
-ageRestricted
-tooManyReserves which translates to maxreserves
#############
- TEST PLAN -
#############
((-- AGE RESTRICTION --))
STAFF CLIENT
1. Find a Record with Items, update the MARC Subfield 521a to "PEGI 16".
2. Get a Borrower who is younger than 16 years.
3. Place a hold for the underage Borrower for the ageRestricted Record.
4. You get a notification, that placing a hold on ageRestricted material is
forbidden. (previously you just got a notification about maximum amount of reserves reached)
((-- MAXIMUM RESERVES REACHED --))
0. Set the maxreserves -syspref to 3 (or any low value)
STAFF CLIENT AND OPAC
1. Make a ton of reserves for one borrower.
2. Observe the notification about maximum reserves reached blocking your reservations.
((-- MULTIPLE HOLDS STAFF CLIENT --))
3. Observe the error notification "Cannot place hold on some items"
((-- MULTIPLE HOLDS OPAC --))
1. Make a search with many results, of which atleast one is age restricted to the current borrower.
2. Select few results and "Place hold" from to result summary header element.
(Not individual results "Place hold")
3. Observe individual Biblios getting the "age restricted"-notification, where others can be
reserved just fine.
Updated the unit tests to match the new method return values.
t/db_dependent/Holds.t & Reserves.t
Followed test plan. Works as expected and displays meaningful messages for the reason why placing a hold is not possible.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch
- rename _entity_clean as _clean_ampersand
- rename the script to sanitize_records.pl
- add a --fix-ampersand switch (the only one FOR NOW, enabled by
default) so it is obvious what the script does.
- make POD and usage reflect this changes.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds:
- a new maintenance script batch_sanitize_records
- a new subroutine C4::Charset::SanitizeRecord
- new unit tests for the new subroutine
Test plan:
1/ prove t/db_dependent/Charset.t
2/ Create a record containing "&amp;" (could be follow with as many
'amp;' as you want) in one of its fields and the same for the field
linked to biblioitems.url.
The url should not be sanitized, it may contain "&".
3/ Launch the maintenance script with the -h parameter to see how to use
it.
4/ Launch the script using the different parameters:
--filename=FILENAME
--biblionumbers='XXX'
--auto-search
The auto-search permits to sanitize all records containing "&amp;" in
the marcxml field.
Use the verbose flag for testing.
Without the --confirm flag, nothing is done.
5/ Use the --confirm flag and verify in the biblioitems.marcxml field
that the record has been sanitized.
6/ Try the --reindex flag to reindex records which have been modified.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
There is no reason for underage borrowers to reserve ageRestricted material and
then be denied it's check-out due to ageRestriction.
This patch prevents reserving material for borrowers not suitably aged.
# # # # # #
# A PRIORI #
# # # # # #
BOTH THE STAFF CLIENT AND THE OPAC
1. Find a Record with Items, update the MARC Subfield 521a to "PEGI 16".
2. Get a Borrower who is younger than 16 years.
3. Place a hold for the underage Borrower for the ageRestricted Record.
4. You can reserve an ageRestricted Record with ease.
STAFF CLIENT ONLY
5. Check-in an Item from the ageRestricted Record and catch the reservation.
6. Check-out the ageRestricted Item for this underage Borrower.
7. You get a notification about being unable to check-out due to age restriction.
How lame is that for a 12 year old?
# # # # # # # #
# A POSTERIORI #
# # # # # # # #
STAFF CLIENT
1. Find a Record with Items, update the MARC Subfield 521a to "PEGI 16".
2. Get a Borrower who is younger than 16 years.
3. Check-out an ageRestricted Item for this underage Borrower.
4. You get a notification about having the maximum amount of reserves.
5. Place a hold for the underage Borrower for the ageRestricted Record.
6. You get a notification, that placing a hold on ageRestricted material is
forbidden.
Includes Unit tests.
Followed test plan. Patch behaves as expected. (Note: Propagating error messages to template will be handled in Bug 13116 or 11999)
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch moves the logic of deciding whether or not a borrower is old enough to access this material
to its own function GetAgeRestriction.
This makes it easier to use AgeRestriction elsewhere, like with placing holds.
This feature adds a new function C4::Members::SetAge() to make testing ages a lot easier.
A ton of Unit tests included.
C4::Circulate::CanBookBeIssued() fixed and issue with undefined $daysToAgeRestriction per Marc Véron's
suggestion.
Test plan:
(See comment #10 for screenshots about using age restriction)
1) Without patch
Configure Age Restricition (see Syspref AgeRestrictionMarker) and have a biblio record with e.g. PEGI 99 in age restriction field
Try to check out to a patron with age < 99
Check out should be blocked
Change entry in age restriction field to PEGI99
Check out schould now be blocked
2) With patch
Try checkouts again, behaviour should be th same.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds links to "My account" and "My checkouts" to drop down in staff client header.
To test:
Apply patch
Got to drop down of logged in user (top right)
See new links to "My account" and "My checkout" (above "Log out")
Test the links.
Signed-off-by: Magnus Enger <digitalutvikling@gmail.com>
Works as advertised. The options are not displayed when you are logged
in as the db/admin user.
Added classes "toplinks-myaccount" and "toplink-mycheckouts" to li tags to make it possible to hide them (per Kyle M $
Switching back to "Signd-off" (Hope this is OK becuause it is a tiny string addition)
Marc
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan (see Bug 6858 for using staticfine.pl) :
For a user (of a given category and library) with several overdues, launch the script :
staticfines.pl --category CAT,AMOUNT --library LIB --delay DELAY
Then, check that the user has been charged of AMOUNT if the due date of the most late item plus the delay is *before* today.
One day later, re-execute the script with the same parameters and check that the fine has not been charged twice.
Without patch, the fine is charged twice, with patch the user already charged is skipped (see output in debug mode)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Without the patch, the fine will be applied every time the script is run.
With the patch the fine will only be applied once.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The default value for *by and *date fields is NULL.
But without this patch, the values are 0 or 0000-00-00.
It comes from the fact that the form set to an empty string the values
and DBIX::Class does not consider them as undefined.
This patch is very ugly, not sure how we can fix that.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
No regressions found, adding and editing suggestions from
OPAC and staff.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
STATUS should be "STATUS", not "status".
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
With this patch, the subroutines NewSuggestion and ModSuggestion use DBIx::Class instead of C4::SQLHelper.
Moreover, the tests and the .pl have been adapted.
Test plan:
1) Apply the patch.
2) Execute the unit tests by launching :
prove t/db_dependent/Suggestions.t
3) The result has to be a success without error or warning :
t/db_dependent/Suggestions.t .. ok
All tests successful.
Files=1, Tests=91, 2 wallclock secs ( 0.05 usr 0.01 sys + 1.65 cusr 0.09 csys = 1.80 CPU)
Result: PASS
4) Log in the intranet, create a suggestion and verify the created suggestion.
5) Edit a suggestion from the intranet and verify the suggestion is correctly modified.
6) Log in the OPAC and verify you can add a suggestion.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Test pass, suggestion created on staff and opac,
suggestion edited without problems, no koha-qa errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script:
Also tested:
- adding suggestion from staff and OPAC
- edit suggestion from staff
- deleting suggestion from OPAC
- changing to a normal status (email got created)
- changing to a custom status (SUGGEST_STATUS)
- display of custom status in OPAC
No problems found.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
While testing a bug, warnings in the opac error log were
building up due to a particular line in C4::Auth. After
reviewing the code, it was discovered that removal of the
OpacMainUserBlockMobile system preference created this.
Since the system preference no longer exists, and is not
used, the line was deleted from C4/Auth.pm to prevent this
warning from occuring.
TEST PLAN
----------
1) Go to any OPAC page.
2) Check your opac error log.
-- there should be something about uninitialized values
used in C4/Auth.pm around line 443.
3) Apply the patch
4) Refresh the page.
-- that same error should not be triggered.
5) prove -v t/db_dependent/Auth.t
-- this runs the get_template_and_user function
which had the parameter removed.
6) run the koha qa test tools
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Sponsored-by: Ville de Victoriaville, QC
Confirmation box contents:
"Please confirm checkout"
"-Rental charge for this item: n"
[Yes, check out (Y)] [No, Don't Check Out (N)]
Test case A: Confirm checkout
1) Go to checkout user "X"'s checkout page.
2) Enter barcode for an item with rental fees.
3) Click the "Check out" button.
4) Confirmation box appears.
5) Click on the "Yes" button.
6) Item is added to checkout list.
7) Fees are added to the patron's account.
Test case B: Decline checkout
1) Go to checkout user "X"'s checkout page.
2) Enter barcode for an item with rental fees.
3) Click the "Check out" button.
4) Confirmation box appears.
5) Click the "No" button.
6) Checkout page goes back to its initial state.
7) Patron has no item checked out and no fees to pay.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
With the system preference RentalFeesCheckoutConfirmation
set to "don't ask" there is no change in behaviour.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
This works, and so I'll sign off, but I'm not crazy about the workflow.
Having the error message display on an otherwise empty page is not user
friendly. The entry form should be redisplayed so that the user can
modify the data they submitted.
That really should be changed in a follow-up.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Description is no longer made required by the template and an empty
description is saved correctly.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
This follow-up makes drastic changes to the templates in order to bring
them into compliance with established patterns and markup guidelines.
Only minor changes are made to perl scripts.
Changes:
- Add a toolbar include for displaying new, edit, transfer, and delete
buttons.
- Improve title and breadcrumbs with collection titles and better
specificity.
- Correct page structure which was inconsistent with the markup of
similarly-structured pages.
- Correct styling of error and informational messages.
- Added detailed error messages for a couple of conditions which were
not defined in the template.
- Add link to the detail page of titles which are in a collection using
the view defined in the IntranetBiblioDefaultView preference.
- Add a link to remove an item from a collection directly without having
to scan the barcode.
- Add client-side validation to collection creation form.
- In RotatingCollections.pm, add biblionumber to the list of columns
returned by GetItemsInCollection.
- In rotating_collections/*.pl, remove obsolete declaration of system
preference variables.
To test, perform all the operations associated with Rotating
Collections:
- Add a new collection
- Edit an existing collection
- Add items to a collection
- Remove items from a collection (via barcode and link)
- Test the behavior of all new toolbar buttons
- Verify that titles and breadcrumbs look correct and links work
correctly.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Test Plan:
In "Tools" -> "Rotating Collections" -> "Add/Remove items":
When adding item barcodes to the collection, the input field
<input type="text" id="barcode" name="barcode">
should become active
automatically so it is easy to add multiple barcodes rapidly without touching the
mouse or keyboard.
Enter-press is dealt by the barcode reader so automatic form submittal should be handled
by the barcode reader.
In "Rotating collections" -> "Transfer Collection":
When the collection is initially transferred, items are set to trasfer correctly.
When the collection is transferred while items are still being transferred, the transfer
destination library doesn't change from the original one.
The holding library changes for all items in the collection to the destination library on
retransfers as well.
This is tricky if a user accidentally places the wrong destination.
When I try to checkin these items to their new retransfer location, I get the following messages:
-"This item is part of a rotating collection and needs to be transferred to <original transfer destination>"
-"Please return Valkoinen ihmissyj / to <original transfer destination>"
-"Print slip or Cancel transfer"
When I checkin a Item to a arbitrary branch, I get the following messages:
"This item is part of a rotating collection and needs to be transferred to <retransfer destination>"
"Please return Valkoinen ihmissyj / to <original trasfer destination>"
Bug 8836 - Resurrect Rotating Collections - QA Followup
Bug 8836 - Resurrect Rotating Collections - Followup 2 - Perltidy rotating collections scripts
Bug 8836 - Resurrect Rotating Collections - Followup 3
* Fix bad TT Tag
* Fix bad sql query
* Fix capitalization ( HTML4 )
* Allow a rotating collection's location to keep AutomaticItemReturn
from sending it back to the branch of origin
* Fix bad query
Bug 8836 - Resurrect Rotating Collections - Followup 4 - Autofocus on barcode field
Bug 8836 - Resurrect Rotating Collections - Followup 5 - Don't transfer issued and waiting items
Items in a rotating collection are automatcially transferred when a
collection is transferred. This is a problem for currently checked out
items and items on hold marked as "Waiting".
This patch resolves this issue by skipping the transfer for those items.
When the items are then returned, the librarian will be alerted to
transfer the item to the library currently holding that rotating
collection.
Bug 8836 - Resurrect Rotating Collections - Followup 5 - Link collections.colBranchcode to branches.branchcode
Signed-off-by: jmbroust <jean-manuel.broust@univ-lyon2.fr>
Signed-off-by: Cindy Murdock Ames <cmurdock@ccfls.org>
http://bugs.koha-community.org/show_bug.cgi?id=8835
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
The example usage for
C4::Members::Messaging::SetMessagingPreferencesFromDefaults
calls the subroutine SetMessagingPreferenceFromDefaults, not
SetMessagingPreferencesFromDefaults (missing the 's' at the
end of 'Preferences').
To test:
- Apply the patch
- Check that the POD now refers to the actual name of the
subroutine
(perldoc C4::Members::Messaging)
http://bugs.koha-community.org/show_bug.cgi?id=13194
Adding 's' is the correct doc change to make it match with
the function definition. Comfirmable with less.
perldoc C4::Members::Messaging proves the doc is still nice.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 11703 breaks the checkouts export feature.
To reproduce: Fill the ExportWithCsvProfile pref and go on the
circ/circulation.pl page. The export column appears, but not the export
button.
Test plan:
Go on the checkout list (circ/circulation.pl and members/moremember.pl)
and verify the export column and the export button appears.
If you click on the button, a file should be generated.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
package Koha::Item::Search::Field
function C4::SQLHelper::GetColumns
function C4::Items::SearchItems
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tests run without error
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Item search is available at catalogue/itemsearch.pl (link is in
catalogue/search.pl)
It only uses SQL (not Zebra)
* Use DataTables and server-side processing to be able to filter on
individual columns after the first search is done.
* Allow to export results in CSV
* With Javascript disabled, search form still works (and CSV export too)
There is the possibility to define "Custom search fields" in a new admin
page admin/items_search_fields.pl (link is in admin/admin-home.pl)
A custom item search field is defined by:
* a name: its unique identifier
* a label: the text displayed to the user
* a MARC field/subfield: the field/subfield to query (it uses
ExtractValue)
* an authorised values list (optional): if defined the list is displayed
in the search form
New Perl dependency: Template::Plugin::JSON::Escape
Test plan:
1/ Apply the patch and run updatedatabase.pl
2/ Go to advanced search (staff interface), then click on "Go to item
search"
3/ Play with the search form! :)
In the 3rd fieldset you can add as many fields as you want and combine them with
boolean operators (AND, OR). You can use SQL jokers characters (%, _)
You can output to screen (in a DataTables table) or to a CSV file.
4/ In the DataTables table, play with filters and try sorting columns.
5/ Disable Javascript (with Firefox: extensions NoScript or YesScript,
or in about:config 'javascript.enabled' = false
6/ Reload the search page and do some searches on screen output. (there
is no sorting or filtering features, but there is still pagination)
7/ Try again CSV output.
8/ You can re-enable Javascript.
9/ Go to Administration > Items search fields
10/ Add a new field. Example for title (in UNIMARC):
Name: title
Label: Title
MARC field: 200
MARC subfield: a
Authorised values category: None
(add another field with an authorised values category to see the
difference).
11/ As you are there try to update and delete some fields.
12/ Go back to items search form. You can see in the 3rd fieldset that
your fields have appeared in the selects.
13/ Try searching on them.
14/ I think you're done :)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. Good new option.
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
- use Modern::Perl;
- fix a typo
- remove an old comment
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This feature will allow libraries to specify that, when an item is returned,
a local hold may be given priority for fulfillment even though it is
of lower priority in the list of unfilled holds.
This feature has three settings:
* LocalHoldsPriority, which enables the feature
* LocalHoldsPriorityPatronControl, which selects for either tha patron's
home library, or the patron's pickup library for the hold
* LocalHoldsPriorityItemControl, which selects for either the item's
holding library, or home library.
So, this feature can "give priority for filling holds to
patrons whose (home library|pickup library) matches the item's
(home library|holding library)"
Test Plan:
1) Apply this patch
2) Run t/db_dependent/Holds/LocalHoldsPriority.t
Signed-off-by: Joel Sasse <jsasse@plumcreeklibrary.net>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
In the OPAC if you view the MARC details for a title (and have
OPACXSLTDetailsDisplay enabled) there is a "view plain" link which displays the
output of opac-showmarc.pl. This is broken in master: fixed by this patch.
Test plan:
(1) Set OPACXSLTDetailsDisplay to default
(2) Do a search on OPAC, then display a specific biblio record
(3) Click on MARC view tab. Then click on 'view plain' link. Nothing is
displayed.
(4) Apply the patch. And refresh the MARC detail page.
(5) Click on 'view plain' link. Check that a plain text MARC record is
displayed.
Signed-off-by: Chris <chris@bigballofwax.co.nz>
Note: This makes a small change to C4::Templates::themelanguage so that
it works with .xsl files too (They live in the xslt dir)
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- capitalization fix "Checked out"
- display new tabs only when feature is activated
- fixes a qa script complaint about POD in Items.pm
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch implements the In-House Use feature for Koha.
It adds:
- 2 new sysprefs:
'In-House Use' to enable/disable this feature
'In-House Use Forced' to enable/disable the feature for *all* users.
- 2 new columns issues.inhouse_use and old_issues.inhouse_use
- Datatable on the circulation history pages (readingrec) at the OPAC
and the intranet.
A new checkbox in the Circulation tab. If checked, the issue become a
in-house use (in the statistics and issues tables).
When you check it, the due date changes to the today date.
The syspref "In-House Use Force" allows to force the in-house use to
permit the checkout even if the borrower is debarred or others problems.
In the issue table, a new string (in red) marks the issue as "in-house use".
The circulation history contains 3 tabs : "all", "checkout" and
"in-house use" (OPAC and intranet).
The cronjob script:
If AutomaticItemReturn if off, a library would like not to do a transit
operation manually. This script (to launch each night) do returns
for a specific branches.
Test plan:
1/ Execute the updatedatabase entry
2/ Enable the 'In-House Use' pref.
3/ Checkout a biblio for a patron and check the 'in-house use' checkbox.
4/ Check that the due date is the today date (with 23:59) and is not modifiable.
5/ Click on the check out button and check that the new check out
appears in the table bellow with the "(In-house use)" string.
6/ Go on the circulation history pages (readingrec and opac-readingrec)
and try the 3 tabs. In the last one, your last checkout should appear.
7/ Check in.
8/ Check readingrec pages.
9/ Choose a debarred patron and check that you cannot checkout a biblio
for him.
10/ Switch on the 'In-House Use Forced' pref
11/ You are now allowed to checkout a biblio for the debarred patron.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When parsing the letter content, the 0000-00-00 should not be replaced,
it's not a valid date.
Test plan:
prove t/db_dependent/Suggestions.t
should not return the following error:
0000-00-00 seems to be a date but an error occurs on generating it (The
'month' parameter ("0") to DateTime::new did not pass the 'an integer
between 1 and 12' callback
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Adds another check for 0000-00-00.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
With the aim to remove hardcoded themes the C4::Templates::themelanguage
got dependent on the DB being populated. This patch reintroduced the
hardcoded defaults as a last resort.
To test:
- Do a fresh install, clean your browser's cache, empty DB
- Open the staff interface
=> FAIL: A "Software error" screen shows "Template process failed: file error..."
- Apply the patch
- Reload
=> SUCCESS: The webinstaller prompts for login correctly.
- Sign off :-D
Regards
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The method C4::Budgets::GetBudgetHierarchy() retreives from database budgets in an array containing a tree of budgets (parent -> children -> children, ...).
The code generating this tree with the SQL results needs optimization because when a lot of budgets exists, it can run during several minutes.
This patch rewites the code using a recurive method.
Test plan :
- Create a active budget "MyBudget" with 1000
- Click "Add found" on this budget
- Create a found "Parent" with 1000, set you has owner
- Click "Add child found" on found "Parent"
- Create a found "Child" with 100, set you has owner
- Click "Add child found" on found "Child"
- Create a found "Grand-child" with 10, set you has owner
|
- Create a new acquisition basket
- Add a new order with "Child budget"
- Select "Child" found and set all costs to 2
- Save order
- Add a new order with "Grand-Child budget"
- Select "Child" found and set all costs to 2
- Save order
- Close basket
- Perform the receive of the two orders
|
- Go to founds of "MyBudget"
=> You see a table with 3 founds
- in "Fund filters", select no library and uncheck "Show my funds only" and click on "Go"
=> You see a table with "Parent" found
- Click on small arrow left of the fund code of "Parent"
=> You see a new line with "Child" found
- Click on small arrow left of the fund code of "Child"
=> You see a new line with "Grand-Child" found
|
=> You see in "Grand-Child" row "Base-level spent" = 2 and "Total sublevels spent" = 2
=> You see in "Child" row "Base-level spent" = 2 and "Total sublevels spent" = 4
This confirms the founds are used in a hierarchie.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds the ability to set an owner to a fund hierarchy
On editing a fund, if it has children, a new checkbox appears "Set this
owner to all children funds".
If checked, all the fund hierarchy will herit to this owner.
This will facilitate the fund owner modifications.
Test plan:
- Verify that the new checkbox only appears if the fund has at least a child.
- Create a consistent fund hierarchy, something like:
fund1
fund11
fund111
fund12
fund2
fund21
- Try to modify a fund owner without checking the checkbox. Verify the
children have not been modified.
- Try to modify a fund owner with checking the checkbox. Verify all fund
hierarchy has been modified.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
It works as announced.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- GetImportBiblios: prepare the query is useless here
- use Modern::Perl
- Remove useless indentation level in pl file and redirect to 404 if
required params are not given.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
New patch should apply correctly.
modified: C4/ImportBatch.pm
modified: koha-tmpl/intranet-tmpl/prog/en/modules/tools/manage-marc-import.tt
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Bug 11876 - Diff column is now displayed.
If a match is found, a 'View' link appears in the Diff column.
Old patch was not implementing datatables, and therefore was not compatible with this version of Koha.
modified: koha-tmpl/intranet-tmpl/prog/en/modules/tools/manage-marc-import.tt
modified: tools/batch_records_ajax.pl
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
These patches have some issues but I'm going to submit a follow-up which
I think will address them all and offer some improvements as well.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When running update_totalissues.pl cronjob, it will stop on a corrupted
record.
This patch changes UpdateTotalIssues so that it return 1 if processing
record has succeded. Also, if mapping with biblioitems.totalissues does
not exist, the method has nothing to do so it stops and returns 1.
When processing a corrupted record, script now alerts about the error on
this biblionumber (if script is verbose) and process next record.
A total number of records with error will be printed at the end of the
script.
Test plan :
- Create a dabase with a few biblios and some issues
- Modify first biblio record (use direct sql update) : set empty value
in biblioitems.marcxml
- Launch script : misc/cronjobs/update_totalissues.pl --use-stats --commit=1000 -v
=> Without patch : the script stops at first record
=> With patch : the script prints error for first record and processes
all records
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I was able to confirm the problem before the patch and successfully
follow the test plan.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
By tweaking the GetReservedAuthorisedValues function in
C4::Reports::Guided, biblio_framework can be added as a dropdown
list into the guided reports parameters.
The change in C4/Reports/Guided.pm required a test, which is
found in t/db_dependent/ReportsGuided.t
Code was then added to reports/guided_reports.pl to build the
appropriate hash to trigger the proper dropdown list.
TEST PLAN
---------
1) Apply patch
2) prove -v t/db_dependent/ReportsGuided.t
-- all should pass, this confirms that both
C4/Reports/Guided.pm and this test file work.
3) Log into staff client
4) Reports
5) Create from SQL
6) Enter appropriate information like:
Report name: Test 13141
-- no need to change Report group or Report is public or Notes or Type
SQL:
SELECT CONCAT('<a href=\"/cgi-bin/koha/catalogue/detail.pl?biblionumber=',
biblio.biblionumber,'\">',biblio.biblionumber,'</a>') AS
BiblioNumbers, title, author, frameworkcode
FROM biblio
WHERE frameworkcode=<<Enter the frameworkcode|biblio_framework>>
7) Save report
8) Run report
-- The parameter entry page should have a drop down of
framework codes.
9) Select a framework code, and click Run the report
-- The displayed SQL should have a "frameworkcode=" portion
matching the selected framework.
10) Run the koha qa test tool.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Test plan followed successfully.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch wraps the SMS::Send Driver initialization and sending process into an eval block
and gracefully causes the sending to fail, instead of crashing the process and preventing
emails and good sms' from being sent.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
* Remove tab characters in acqui/addorder.pl
* Remove FIXME in acqui/cancelorder.pl
* Fix typos: "canceled" -> "cancelled", "occured" -> "occurred"
* Replace "Click here" link by "OK"
* Add a column to aqorders to store cancellation reason instead of
having it in aqorders.notes, to avoid having untranslatable strings in
database
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Some code was duplicated, all is now in cancelorder.pl
Added possibility to provide a reason for cancellation (or other things,
this is saved in aqorders.notes)
Signed-off-by: Corinne Bulac <corinne.hayet@bulac.fr>
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When the stratify_tags function is called without any tags, the
$min and $max variables are left undefined, which triggers a
warning message about uninitialized values in the subtraction.
TEST PLAN
---------
1) prove -v t/db_dependent/Tags.t
-- should succeed, but there is no test for empty tags.
2) Make sure that you have no tags
3) In Opac, go to 'Tag cloud'
4) Check the opac error log file
(e.g. ~/koha-dev/var/log/koha-opac-error_log) for entries
regarding uninitialized values $max and $min in C4/Tags.pm
5) apply this patch
6) prove -v t/db_dependent/Tags.t
-- should still succeed, though no tests are added.
7) Reload page 'Tag cloud'
-- Result: No additional warnings in opac error log file.
Signed-off-by: Chris <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
New and old tests pass. Works as described.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
With the OPAC prog template going away, the only remaining use of the
yuipath preference is on the basketgroups template. The yuipath
preference should be removed and the local path hard-coded.
This patch:
- removes yuipath handling from C4/Templates.pm
- removes the preference from sysprefs.sql
- deletes the preference via updatedatabase.pl
- removes the preference from the staff client preferences file
- removes unused references to the YUI assets from the help file
header include
- adds the local YUI asset path to acqui/basketgroup.tt
To test, apply the patch and run the database update. View some online
help pages and confirm that they function correctly. View the
basketgroups page (Acquisition -> Vendor -> Basket groups), edit a
basket group, and confirm that basket drag and drop operations work
correctly.
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Online help and basket group drag&drop functionality still work correctly.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Two XSL files in the bootstrap theme contain hard-coded paths to the
prog theme directory. This patch adds a query of the opacthemes system
preference and builds the path based on the returned value.
To test in a MARC21 system:
Create or locate a record which contains a subject which is linked to an
authority record. View the detail page for that record in the bootstrap
OPAC and confirm that there is a magnifying class icon next to the link
for that subject heading. Inspect or right-click the image and "View
image" [FF. "Open image in new tab" in Chrome] to verify that the image
being shown is from the bootstrap theme directory.
Also modified: The NORMARC XSL for the detail page which has been
changed in the same way. I did not test it in a NORMARC catalog.
Edit: Fixed copy-and-paste error causing duplicate image.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
The is a problem in the logic, fallback must be:
1. Requested (theme, lang, tmpl)
a. return (theme, lang, tmpl), if not
b. return (fallback, lang, tmpl), if not
c. return (theme, 'en', tmpl), if not as last resort
d. return (fallback, 'en', tmpl)
Previous patch missed option 'c', worked for CCSR
but not bootstrap, sorry.
Signed-off-by: Petter Goksoyr Asen <boutrosboutrosboutros@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
This patch removes hardcoded 'prog' from themelanguage on C4/Templates.pm
It adds a new syspref OPACFallback to hold the prefferred fallback
theme for new themes with minimal changes.
This does not brake CCSR if new syspref value is 'prog',
using 'bootstrap' works somehow, but with strange results.
To test:
1) Apply the patch
2) Run updatedatbase.pl
3) CCSR, prog & bootstrap must work as usual
4) Need to test theme/language fallback
a) translate for your preferred language (xx-YY)
b) enable language on opac
c) go to opac, select that language
d) login on opac, go to personal details
e) remove koha-tmpl/opac-tmpl/bootstrap/xx-YY/modules/opac-memberentry.tt
d) reload page, must load in English
f) click other member options, must load on translated language
(can use other pages, ccsr, prog or bootstrap)
5) Do a similar test but for a staff page, enable lang, switch to it,
rm koha-tmpl/intranet-tmpl/prog/xx-YY/modules/admin/admin-home.tt,
any page must be translated except for admin home.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Petter Goksoyr Asen <boutrosboutrosboutros@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
With CCSR now deprecated there is no longer a need for the
OPACMobileUserCSS system preference. This patch removes it.
To test, apply the patch and run updatedatabase. Check that the
preference can no longer be found in system preferences.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Preference removed, no koha-qa errors.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
With CCSR having been deprecated there is no longer a use for the
OpacShowLibrariesPulldownMobile system preference. This patch removes
it.
To test, apply the patch and run updatedatabase. Check that the
preference can no longer be found in system preferences.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Preference removed, no koha-qa errors.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
The C4::Acquisition module should be exploded in order to add
readability and maintainability to this part of the code.
This patch is a POC, it introduces a new Koha::Acquisition::Order module and put in
it the code from NewOrder and NewOrderItem.
Test plan:
1/ Create an order, modify it, receive it, cancel the receipt.
2/ Launch the prove command on all unit tests modified by this patch and
verify that all pass.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Without the module some of the tests will fail. As this is
fixing a serious bug for RTL language users, we agreed
to make it mandatory.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes subtag_registry.sql from lang dirs,
and put it on a new mandatory dir
In that way we need to update only one file.
All similar files are removed.
To test:
1) Try a new install, or simply create a new database,
grant permissions on it, change koha-conf.xml to use
this database and go to staff page
2) Go step by step until all mandatory or optional sql
files are loaded. Check that subtag_registry.sql is
loaded.
3) Do it again but on other language. First install
translation and repeat 2), could use de-DE or fr-FR
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, tested with de-DE.
Thx!
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a new DB field serial.claims_count
This field already exists for late orders. It makes sense to introduce
it for serial.
Test plan:
0/
a) Does not apply the patch.
b) Remove all your claimissues notices and be sure you have some serial issues
in late.
c) remove email address for the vendor you will use.
d) remove email address for the logged in user.
e) Export claims using the csv export => The selected issues will be
marked as claimed.
f) logout/login (to update the email address).
1/ Apply the patch and execute the updatedb entry.
2/ Go on the Serials > Claims page
3/ Verify that you get a warning message 'No claimissue notice defined'
4/ Verify the vendor list is correct (with the number of serial in late.
You should not get any changes here.
5/ Select one vendor and verify that the issue which was claimed before
has a claim count set to 1.
6/ Verify that you are not able to send notification to the vendor.
7/ Create a claimissue notice.
Something like:
<<LibrarianFirstname>>
<<LibrarianSurname>>
The following issues are in late:
<order><<biblio.title>>, <<biblio.author>> (<<biblio.serial>>)</order>
8/ Go on the Serials > Claims page, the warning message does not appear
anymore.
9/ Select issues. Select a notice. And "Send notification".
You should get an error (no email defined for this vendor).
10/ Add an email for the vendor.
11/ Select issues. Select a notice. And "Send notification".
You should get an error (no email defined for your user).
12/ Add an email address to your user
logout/login
13/ Select issues. Select a notice. And "Send notification".
You should get a happy message: the email has been sent!
14/ The email will contain the order tags if bug 12851 is not
pushed/applied.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, some small issues fixed in a follow-up.
Note: If you change the email address of your staff user, you will
have to log out and back in to make the change take effect.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch fix the cn_sort sorting accurace described by Joy Nelson.
Testing:
I) Appy the bug 12424 patch
Before applying this patch:
0) Select 3 items.
1) Edit the items selected
2) Change "Full call number" option to 971/P23w/v.1-2/pt.8, 971.01/P23w/v.1-2/pt.6-7 and 971.01/P23w/v.1-2/pt.7
3) Save changes
4) Valide 971P23WV_12PT_8_000000000000000, 971_000000000000000_01P23WV_12PT_67 and 971_01P23WV_12PT_700000000000000 (table items - cn_sort column).
After applying this patch:
5) Edit again the item selected in 0
3) Save changes
4) Valide 971_000000000000000_P23W_V_12_PT_8, 971_010000000000000_P23W_V_12_PT_67, 971_010000000000000_P23W_V_12_PT_7 (table items - cn_sort column).
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
We should add the ability to apply a regular expression to screen
messages for the SIP2 server. This would allow libraries to not only
customize the screen messages the patron sees, but can also allow screen
messages to be translated.
Test Plan:
1) Apply this patch
2) Inspect etc/SIPconfig.xml, note the new screen_msg_regex tags
that can be nested inside a given login tag.
3) Add one or more screen_msg_regex tags to your own SIP config
Recommendation: s/Greetings from Koha./Welcome to your library!/g
4) Restart your SIP2 server
5) Test with a SIP2 machine, or use /misc/sip_cli_emulator.pl
6) Note your new AF fields!
Signed-off-by: Jason Burds <jburds@dubuque.lib.ia.us>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This subroutine is now useless.
Test plan:
git grep FormatNumber
should not return any result in pl and pm files.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
[New commit on 18 Aug 2014 : rebased, and DOM indexing only]
Issues to fix :
Most of 6XX may contain a $2 that identifies the system used for indexing. It should not be indexed.
In French libraries, $2 contains "rameau". So searching books about the music composer "Rameau" retreive thousands of records!
For some 6XX fiels, other subfields should not be indexed, for example dates of persons and family, or adresses.
In Unimarc guide, 600$t,601$t,602$t are said to exist but to be "not used". I keep them indexed.
Additionnally, subject indexing could be improved by using specific indexes for each 6XX if possible :
In ccl.properties :
- su-to, su-geo and su-ut are defined as aliases of Subject.
- a specific index is defined, but not used in record.abs : Subject-name-personal, alias su-na
We can use these indexes and create new specific indexes by using existing bib1 attributes.
We could also index $j,$x,$y,$z subdivision in specific indexes.
This patch does the following changes :
1) For all 6XX : Not indexing $2 (LSCH, Rameau...), $3 and $5
2) Suppressing the indexing of some specific subfields, depending on the field:
600 : Personal name used as a subject // see Marc21 600
not indexing c (additional elements),f (dates),p (address/affiliation)
602 : Family name used as a subject // see Marc21 600 3X
not indexing f (dates)
616 : Trademark
not indexing c,f
3) For all 6XX : index $j,$x,$y,$z in several indexes in addition to the specfific index for their 6XX field:
4) Define in ccl.properties some specific indexes :
Subject-name-conference 1=1073 => alias su-conf
Subject-name-corporate 1=1074 => alias su-corp
Subject-genre-form 1=1075 => alias su-genre and su-form
Subject-geographical 1=1076 => alias su-geo
Subject-chronological 1=1077 => alias su-chrono
Subject-title 1=1078 => alias su-ut and su-ti
Subject-topical 1=1079 => alias su-to
5) Adding new aliases in Search.pm :
su-chrono, su-form, su-genre, su-corp, su-conf, su-ti
6) Using these new indexes in for
600 : Subject and Subject-Personal-Name ; all subfields except subdivisions in Personal-name
601 : Subject, Subject-name-conference and Subject-name-corporate and Subject-name-conf ; all subfields except subdivisions in Corporate-name and Conference-name
602 : same as 600 but could be improved later
604 : Subject and Subject-title ; $a in Subject-Personal-Name ; all subfields except subdivisions in Name-and-Title
605 : Subject and Subject-title
606 : Subject and Subject-topical
607 : Subject and Subject-geographical ; all subfields except subdivisions in Name-geographic
608 : Subject and Subject-genre-form
To test :
A. In a UNIMARC-DOM indexing environment
1) Apply the patch
2) Rebuild zebra
3) Create a record A with some values in critical fields, for example:
- the string "test9828" in 600$c 600$f 600$p, 602$f, 616$c, 616$f, 606$2,600$2
- the string "subform" in 600$j
4) Create a record B with the string "subgeo" in 606$y
5) Create a record C with the string "subdate" in 606$z
6) try to search "su:test9828". You should have no results
7) try to search "su-genre:subform". You should have 1 result : record A
8) try to search "su-geo:subgeo". You should have 1 result : record B
9) try to search "su-chrono:subdate". You should have 1 result : record C
10) on existing records, try su-ut, su-to, su-na, su-form, su-corp, su-geo indexes, and see it results are relevant
Indexing of subjects could maybe be improved later
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
All seems to work as expected, I am not super-familiar with UNIMARC but I wonder if in su-corp and su-conf the subdivisions might be useful (e.g. France-Gendarmie / Staatsbibliothek-Berlin)
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
On the 23 July development meeting it was decided to formally deprecate
GRS-1 indexing mode for Zebra. This patch makes code fallback to DOM
on the remaining places. No behaviour change should be noticed, as DOM
has been the default for a while.
Regards
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script.
Also checked running Makefile.PL
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch makes _get_facet_from_result_set rely on a new syspref (FacetsMaxCount)
to set the max facets to show for each facet category. It defaults to 20 if
the syspref is absent or empty.
To test:
- Have a search with lots of facet results (with some category showing the "See more" link).
- Jump to "See more", notice it shows more than 20 facet values.
- Apply the patch, reload the page.
=> SUCCESS It only shows 20 (default hardcoded value)
- Change the FacetsMaxCount syspref to other value (e.g. 15 or 100).
- Reload
=> SUCCESS: it shows the expected amount.
- Sign off :-D
Regards
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Test plan completed successfully
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Passes tests and QA script, works as described.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 10550 as renamed items.wthdrawn into items.withdrawn.
This change was missing in ILSDI/Services.pm
Test plan :
Test ILSDI webservice GetAvailability on a item with items.withdrawn > 0.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixes what seems to be the last occurence of wthdrawn.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
So notices using it (circulation, holds etc) will now use the new behaviour
To test:
1/ Edit the new systempreferences (ReplytoDefault and ReturnpathDefault)
2/ Optionally edit the branch the mail will be sent from, adding email addresses
3/ Test some mails, a circulation alert, an acquisitions claim, or a newly created borrower alert
4/ Check that the mails have the correct From, Replyto and ReturnPath set
The rules are
If the values are set in the branch use that, else use the syspref
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test
1/ Apply patch
2/ Add or Edit a branch, filling out the new fields
3/ Check that the changes saved
http://bugs.koha-community.org/show_bug.cgi?id=9530
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
I could reproduce this problem in 3.14.4 where I wrote the patch.
Fields shifted like branchcode moved to B_phone.
Could not reproduce it for master.
But this code change seems to improve things on master too.
TEST PLAN
---------
1) Alter the order of your deletedborrowers table.
e.g. alter table deletedborrowers change column privacy privacy int(11) after city;
2) Apply the 3.14.x test patch.
3) prove -v t/db_dependent/Members.t
-- Will fail on the new test.
4) Apply the 3.14.x code change patch.
5) prove -v t/db_dependent/Members.t
-- Will succeed on the new test.
6) run koha qa test tools.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Patch set reintroduced the formerly removed system preference,
just removing it again.
Also fixes complaints of the QA script about POD in the new module.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
* POD doc
* hardcoding hea.koha-community.org as the URL where the stats must
be sent
* fixing some typos
* adding all sysprefs we want to upload.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Goals:
- Collecting Koha usage statistics
- Rendering stats on a community website
- Having a big bicture of how koha is used
3 parts in the project:
- this patch in koha
- hea-ws which collects data
- hea-app which renders data
Installation:
1/ Fill systempreferences:
UsageStatsLastUpdateTime UsageStatsID UsageStatsShare UsageStatsLibraryName
2/ Setup a cron in your crontab (ex: at 3:00 every first of the month):
0 3 1 * * export KOHA_CONF=/home/koha/etc/koha-conf.xml; export PERL5LIB=/home/koha/src; perl /home/koha/src/C4/UsageStats.pm
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch fixes the "Publication date" and "Acquisition date"
searches when using non-QueryParser and QueryParser searches.
It adds structure attributes to the template, which is consistent
with how phrase searching is currently handled.
It removes unnecessary code from Search.pm, adds some necessary
code which is consistent with existing code, and adds a lot of
explanatory comments.
_TEST PLAN_
Before applying:
0) Turn off QueryParser
1) Try a "Publication date" or "Acquisition date" search from the
staff client advanced search.
2) Note that even though the description on the result page makes
it seem like you're doing an index-specific search, you're actually
doing a keyword search. You can verify this by checking the 008
from positions 7 to 10 for "Publication date" or "Date accessioned"
on items for "Acquisition date".
3) Turn on QueryParser
4) Try doing the searches from Step 1.
5) A "Publication date" search should probably produce zero results
After applying patch:
6) Keep QueryParser on
7) Try doing the searches from Step 1.
8) Notice that you're actually getting results consistent with
your search (ie the 008/7-10 shows the date you searched for,
and there is a "Date accessioned" in items which matches your
search)
9) Turn off QueryParser
10) Note that your results are exactly the same as step 8
(N.B. this is because QueryParser is falling back to non-QP mode
instead of producing a bad query.)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Zebra is not designed to have persistent connections, under cgi this
didn't matter the scripts would get a new connection each time, but
under plack we try to use dead connections
This patch changes it so plack works the same way that cgi did.
To test:
Apply this patch
Do some searches
Check everything still works
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
This sub was causing 2 bugs :
- tools/exports.pl --clean was removing Â
- authority search plugin used in cataloging was removing  in suggested authorities displayed dynamicly (using ajax)
After applying the patch,
- NSB/NSE are still removed by nsb_clean
- tools/exports.pl --clean is no more removing Â
- authority search plugins is no more removing Â
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- The shibboleth patch introduced an undefined message into the error
logs, when shiboleth is disabled.
Testplan
1. Ensure shibboleth is disabled.
2. Refresh any opac page
3. See 'Use of uninitialized value $ENV{"REMOTE_USER"} in string ne at
/home/koha/kohaclone/C4/Auth.pm line 711.' popup in the opac-error.log
4. Apply patch
5. Refresh opac page
6. Error should no longer appear
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
On top of Bug 8375
If you print a label using arabic/hebrew script,
letters are printed in logical direction, from left
to right, giving a mangled result
This patch will try to fix those cases adding a new
perl dependency, Text::Bidi, and using the automagic
feature if it's log2vis() function to rearrange chars
based on detected text 'direction'
To test:
1. Install Text::Bidi package
(apt-get install libtext-bidi-perl)
2. Try a batch, using Helvetica, with a mix of
ltr and rtl (arabic/hebrew) titles, chars are good,
but direction is bad
NOTE: I suggest changing the mapping for 'HO' font
on koha-conf.xml, from DejaVuSans-Oblique.ttf to
DejaVuSans.ttf to view 'title' chars
3. Apply the patch
4. Try again, now the result is good
Formerly a followup of Bug 8375, look sample pics
on that Bug.
Rebased following changes on Bug 8375
Note: Arabic titles will not be displayed, because
current code selects Oblique variant (unless you
change mapping as suggested on 2. )
Hebrew looks good.
Rebased and move use of new dependency to Labels.pm
Rebased on master
Signed-off-by: Karam Qubsi <karamqubsi@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested with the help of Bernardo. With the patch
the characters of RTL strings appear in the correct
order in the generated PDF files.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The message in circulation.tt assumed to get days but date is given. Updated comments and message depending on expiration date or no expiration of restriction.
The message shows up on top of Bug 643 Allow override of 'debarred' status if a patron has a restriction.
Replaced date_format with date template (see comment #6)
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch increases the cn_sort field length to 255 chars.
Modified:
C4/ClassSortRoutine.pm - change the hardcoded cn_sort length to 255
installer/data/mysql/kohastructure.sql - alter tables items and deleteditems,
biblioitems and deletedbiblioitems
installer/data/mysql/updatedatabase.pl - alter tables items and deleteditems,
biblioitems and deletedbiblioitems
Testing:
Before applying the patch:
0) Select an item
1) Edit the item selected
2) Change "Full call number" option to 530 F435_1996 v2p1
3) Save changes
4) Valide 530_000000000000000_F435_1996_ (table items - cn_sort column).
After applying the patch:
5) Edit again the item selected in 0
3) Save changes
4) Valide 530_000000000000000_F435_1996_V2P1 (table items - cn_sort column).
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script.
Works as described.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- To correct tests after converting module to dbic, we need to add the
Test::DBIx::Class module as a dependancy.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
The dependency will probably need to be packaged by us until
it can get into Debian proper.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- Convert Auth_with_shibboleth to use dbic stanzas.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- A number of issues were highlighted whilst writing sensible unit tests
for this module.
- Removed unnessesary call to context->new();
- Global variables are BAD!
- Croaking is a wimps way out, we should handle errors early and
properly.
Signed-off-by: Matthias Meusburger <matthias.meusburger@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- Local fallback was not very well implemented, this patch adds
better handling for such cases allowing clearer failure messages
- This patch also adds the ability to use single sign on via the
top bar menu in the bootstrap theme.
BUG8446, Follow up: Adds perldoc documentation
- Add some documentation to the Auth_with_Shibboleth module
including some guidance as to configuration.
BUG8446, Follow up: Correct filenames to match guidlines
- Moved Auth_with_Shibboleth.pm to Auth_with_shibboleth.pm to match
other files present on the system.
BUG8446, Follow up: Correct paths after file rename
BUG8446, Follow up: Implemented single sign out
- This follow up rebases the code against 3.16+ which managed to break
some of the original logic.
- As a side effect of the rebasing, we've also implemented the single
sign out element. Upon logout, koha will request that the shibboleth
session is destroyed, and then clear the local koha session upon
return to koha. Due to the nature of shibboleth however, you will
only truly be signed out of the IdP if they properly support Single
Sign Out (which many do not). As a consequence, although you may
appear to be logged out in koha, you might find that upon clicking
'login' the IdP does NOT request your login details again, but instead
logs you silently back into your koha session. This is NOT a koha bug,
but a shibboleth implementation issue that is well known.
BUG8446, Follow up: Fixed bootstrap login via modal
- The bootstrap theme enable login from any opac page via modal. To
enable this with shibboleth we had to make some template parameters
globally accessible when shibboleth is enabled.
BUG8446, Follow up: Add template rules for Shibboleth and CAS
- Add template rules so that CAS and Shibboleth can coexist.
BUG8446, Follow up: Added default config to config file
BUG8446, Follow up: Embellished perldoc documentation
- Updated perldoc to correct detail about configuring shibboleth
authentication.
- Updated perldoc to include subroutines and their respective functions.
BUG8446, Follow up: Enable configuration of match field
- Added clearer, more flexible, configuration of shibboleth attribute to
koha borrower field matching for authentication
- Correcting of documentation to make it more clear to the current
implementation
- Minor refactoring of code to reduce some code duplication
Signed-off-by: Matthias Meusburger <matthias.meusburger@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Matthias Meusburger <matthias.meusburger@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- Use syspref OpacBaseURL instead of ENV{'SERVER_NAME'} as this wont
work if koha is behind a reverse proxy.
- To use multiple vhosts, set OpacBaseURL per vhost explicitly with
'SetEnv OpacBaseURL Value' as per Bug 10325
BUG8446, Follow up: Adds Shibboleth authentication
- Ensure user is returned to requested page after authentication
- Added querystring to the target path in shibboleth URL so
that when a user is authenticated he/she is returned to the
correct page they requested before authentication.
Example where this is important: When a user clicks a direct
biblio link of the form - /opac-detail.pl?biblionumber=12345
BUG8446, Follow up: Remove unused imports from scripts
- Remove import of deprecated C4::Utils module from shibboleth
authentication module: Auth_with_shibboleth.pm
Signed-off-by: Jesse Weaver <pianohacker@gmail.com>
Signed-off-by: Matthias Meusburger <matthias.meusburger@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- Use the shibbolethAuthentication syspref to enable Shibboleth authentication
- Configure the shibbolethLoginAttribute to specify which shibboleth user
attribute matches the koha login
- Make sure the OPACBaseURL is correctly set
BUG8446, Follow-up: Adds Shibboleth authentication
- Fix logout bug: shibboleth logout now occurs only when
the session is a shibboleth one.
- Do some refactoring: getting shibboleth username is now
done in C4::Auth_with_Shibboleth.pm (get_login_shib function)
BUG8446, Follow-up: Adds Shibboleth authentication
- Adds redirect to opac after logout
BUG8446, Follow-up: Adds Shibboleth authentication
- Shibboleth is not compatible with basic http authentication
in C4/Auth.pm. This patch fixes that.
BUG8446, Follow-up: Adds Shibboleth authentication
- Use ENV{'SERVER_NAME'} instead of syspref OpacBaseURL in order to work with
multiple vhosts.
BUG8446, Follow-up: Adds Shibboleth authentication
- Adds missing protocol for $ENV{'SERVER_NAME'}
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jesse Weaver <pianohacker@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested with the feide idp.
- LDAP login and logout are working
- local login/logout are still working
- CAS login/logout are still working
Instructions for setup can be found on the wiki:
http://wiki.koha-community.org/wiki/Shibboleth_Configuration
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It seems the removal of global variables changes the behaviour
of Test::MockModule, and it now expects the namespace in front
of the statically called method.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
In C4::Reports::Guided, a lot of variables was defined at module level
and reused in subroutine.
I didn't find any problem with Plack, so I'm not sure this patch is
useful.
Test plan:
Verify there is no more ^my in the module and you don't find any
regression with the guided reports tools (with and without Plack)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
I'm unsure if this is needed, but I have verified it causes no
regressions
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
No regressions spotted. I'd prefer this code to be fully refactored of course :-P
This patch adds a variable to koha-conf.xml controlling the use of Zebra facets.
Usage:
- use_zebra_facets = 1 | 0
Zebra facets work only on DOM.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds the following routines to C4::Search
- GetFacets
This is a wrapper routine, that given a ZOOM::ResultSet, extracts
the relevant facets. To do the job, it uses the internal functions:
_get_facets_from_records and _get_facets_from_zebra. The choice is done
on querying the indexing mode: grs1 will use records, and dom zebra's facets.
- _get_facets_from_records
Just refactoring the already existent main loop from getRecords into a function.
- _get_facets_from_zebra
Given a result set, loop through all defined facets in C4::Koha::getFacets
and call _get_facet_from_result_set for each, to build the facets
information. It retrieves the facets from Zebra's facets.
- _get_facet_from_result_set
Given a result set and a facet index name, retrieve the facets
for the given index, and build the result for rendering.
To test this preliminay work:
- Apply the patches, install on DOM, using MARC21, NORMARC and UNIMARC.
- Reindex some DB with lots of records.
- Check facets work.
Note: UNIMARC is the only dialect that has more than one subfield (concatenated)
for facets values, so it is better to test on uNIMARC. The approach leaves room
for re-thinking facets in MARC21/NORMARC, but it is outside of the scope of the bug
(e.g. we could have more author facets)
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: David Cook <dcook@prosentient.com.au>
Seems to work with DOM and MARC21.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since nobody is currently working on the zebra layer introduced by bug
8233, Solr won't never work.
Some code has been introduced in 3.10 to prove several search engines
can cohabit into Koha but no help/fund has been found to go ahead.
It is useless to keep this code and to maintain an ambiguous situation.
I think the indexes configuration page could be restore later if someone
else introduces a new search engine into Koha.
Test plan:
Look at the code introduced by bug 8233 and verify all is removed.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If an item is edited and a field is not mapped to Koha, it is to 0 or
NULL (depending on the default value defined).
This patch adds a check on the mapping before editing the item. It there
is no mapping, the DB value is not erased.
Test plan:
1/ Edit an item and fill a value for a field
2/ Unmap this field
3/ Edit the item
4/ Verify that the value is not erased (using the MySQL CLI)
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Make the caching more correct. Also removes a warn that got left behind.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Authorised values are now cached using the proper Koha::Cache mechanism,
rather than a simple internal cache. Memoize has been removed because it
didn't really work like we needed it to.
Test plan:
* running a persistent environment:
* load the edit item screen
* refresh several times to ensure any process-based caches are filled
* add a new LOC authorised value as fast as possible (prepare it on
another tab.)
* refresh the edit item page
* note that the new LOC value may or may not be showing in the
"shelving location"
* if more than 5 seconds have passed since saving it, it must now show
up.
* refresh a few times to ensure that it's showing on all processes.
Note:
* This patch depends on the caching changes of 9967.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch fix the subroutine name and add a restriction on the
arguments: both argument are mandatory!
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
User may cancel his own reservation at waiting or in transit status
through calling opac-modrequest.pl. Cancel button is disabled in
interface but possibility to cancel should be checked also in
opac-moderequest.pl, before calling CancelReserve().
Similar situation is with opac-modrequest-suspend.pl
This patch provides new soubroutine to chceck if user can cancel given
reserve. It's possible only when he's owner of hold and hold isn't in
transfer or waiting status.
Additionaly there are new test for this function in Reserves.t
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests, QA script and new tests.
Works as described, tested with:
.../cgi-bin/koha/opac-modrequest.pl?reserve_id=XXX
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes hardcoded descriptions and sets them in the templates
using the variable content as id.
To test, create a new guided report and verify the 'module to report on' dropdown
shows as usual [1]. Functionality shouldn't get changed.
The patch also changes the dictionary pages where 'area' should be displayed/selectable
with the same strings as the guided reports. Try all the possible disctionary pages.
The last page when creating a dictionary now shows the 'area description' instead of the
code. The same happens to the dictionary list once you have dictionaries saved.
[1] The following texts get changed:
Catalogue -> Catalog
Acquisition -> Acquisitions
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If the patron has amassed charges that block borrowing, but we
allow staff override the information that the patron cannot
issue should be included the patron information response
This patch sets the appropriate status fields in the patron object
It restores the fee_limit member to the patron object
and calls a local subroutine to set it.
This could be done more elegantly but that would require more
major refactoring of the rather messy initializer code
in ILS::Patron
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If a patrons fines exceed noissuescharge and we allow
staff to allow issue at their discretion via an override
the SIP process allowed charges to go ahead.
This patch closes the loophole which allowed self issue
to subvert the usual library loan policy
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
CancelHold takes two parameters: patron_id and item_id.
If item_id is considered as an itemnumber, holds on title can't be
canceled.
If item_id is considered as a biblionumber, all holds on this
biblionumber (for a borrower) will be canceled.
So CancelHold have to consider item_id as a reserve_id.
- Added subroutine C4::Reserves::GetReserve
- C4::ILSDI::Services::GetRecords now returns the reserve_id
- Fix the text in the ilsdi.pl?service=Describe&verb=CancelHold page
- Unit tests for CancelReserved and GetReserve
- Do not delete row in reserves table if insert in old_reserves fails
Signed-off-by: Leila and Sonia <koha.aixmarseille@gmail.com>
Signed-off-by: Benjamin Rokseth <bensinober@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signing off, while noting a style issue in the patch review
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script.
Placed and cancelled a hold using ILS-DI successfully.
Adding a follow-up to also update the ils-di documentation
page in the bootstrap theme.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
EDIT: I removed the changes it did to the prog theme.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test Plan:
1) Apply this patch
2) prove t/db_dependent/Ratings.t
3) Note all unit tests pass
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Also tested:
- Adding a rating
- Rating displayed on detail
- Rating displayed on results
- Modifying a rating
- Change displayed correctly on detail and results
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
NewOrder should be more tested!
This patch moves the existing unit tests into a new file and adds some
unit tests.
Note that there is no DB field aqorders.subscription, so the test in
NewOrder can be removed.
Test plan:
prove t/db_dependent/Acquisition/NewOrder.t
and
prove t/db_dependent/Acquisition.t
should return green.
Signed-off-by: Zeno Tajoli <z.tajoli@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since the basketno parameter is needed to insert an order, it is useless
to return it.
This patch changes the prototype for the C4::Acquisition::NewOrder
subroutine. The return value is now a scalar containing the ordernumber
created.
Test plan:
Verify there is no regression on an acquisition workflow:
1/ Create an order with several items
2/ Modify the order
3/ Receive some items
4/ Cancel the receipt
4/ Receive some items
5/ Receive all remaining items
6/ Cancel the receipt
Signed-off-by: Zeno Tajoli <z.tajoli@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The behavior is quite weird, but
$schema->resultset('Table')->create($data)->id
does not return the id inserted if $data contains the key.
To be more clear, in this case
$schema->resultset('Aqorder')->create($new_order)->id
returns an empty string because $new_order->{ordernumber} is an empty
string!
This was not caught by the unit tests, I added one.
Test plan:
- AcqCreateItem set to ordering
- Create an order with items and verify items are correctly linked to the
order.
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Confirmed that without the patch the created item is not linked to the
order (entry in aqorders_items). With the patch, it works as expected.
Passes tests and Koha QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a checkbox for "Automatic renewal" to the checkout page.
CanBookBeRenewed is modified to include two new errors:
- auto_renew (renewal shouldn't be done manually)
- auto_too_soon (renewal is premature and shouldn't be done manually)
To test:
1) Add or edit an issuing rule with "Automatic renewal" and another
one without it.
2) Issue at least three items:
- automatic renewal by issuing rule
- automatic renewal by Checkbox on the checkout page
- no automatic renewal
3) Test the following steps for both:
Home > Circulation > Checkouts
Home > Patrons > Patron details
4) Confirm that issues with automatic renewal cannot be renewed manually,
even if there are still renewals left and it's not too soon to renew.
5) Confirm that "Scheduled for automatic renewal" and the remaining
renewals are displayed. If no renewals are left "Not renewable" should
be displayed.
6) Confirm that issues without automatic renewal behave as usual.
Sponsored-by: Hochschule für Gesundheit (hsg), Germany
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This fixes regression introduced by Bug 6536 so that multiple
words in title search will work.
Test scenario:
1. try z39.50 search with more than one word
2. verify that no results apper
3. apply patch and re-run search
4. verify that there are results
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If you suspend a hold, the item does not show Available. It still shows
the person next in line, who isn't eligible for the hold yet because of
the suspension. This is not the case for a delayed hold, where you
originally place the hold and tell it not to start until a future date.
If you do that, it shows as Available. This is confusing and
inconsistent.
Test Plan:
1) Create an item level suspended hold for a record with no other holds
2) Note in the record details that the hold shows an item level hold
3) Apply this patch
4) Refresh the record details page, note the item is "Available"
5) Optional: prove t/db_dependent/Holds.t t/db_dependent/Reserves.t
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes all tests and QA script.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If the receipt in not on the whole order but only on a part of it, the
change should be done on the itemnumber linked to the "new order", the
one we are reverting.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 8307 introduces the AcqItemSetSubfieldsWhenReceived pref.
You can now update an item field on receiving (if you create items on
ordering).
But if the receipt is cancel, there is no way to revert these changes.
This patch adds a new pref AcqItemSetSubfieldsWhenReceiptIsCancelled to
allow to revert changes previously done on receiving
Test plan:
0/ Set the AcqCreateItems to 'ordering'
1/ Fill AcqItemSetSubfieldsWhenReceived with o=1 (UNIMARC) or 7=1
(MARC21).
2/ Fill AcqItemSetSubfieldsWhenReceiptIsCancelled with o=2 (UNIMARC) or
7=2 (MARC21)
3/ Create an order with some items
4/ Receive the order and verify the notforloan value is set to 1
5/ Cancel the receipt and verify the notforloan value is set to 2
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Before Bug 9811, the patron search searched on extended attributes.
This patch restore this behavior.
Test plan:
0/ Create a patron attribute PA
1/ Create a patron A (cardnumber CNA) with PA="foo"
2/ Create a patron B (cardnumber CNB) with PA="foo bar"
3/ Search for CNA should redirect on the patron detail page.
4/ Search for "foo" should display the search result with 2 results.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
'Searchable' patron attributes can now be searched for again.
Works as described, passes stests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes the commented line for permanent_location.
It adds a more general comment.
Adjusts the exists check on permanent_location.
Adds a reference to bug 12817 that will deal with paidfor similarly.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
A quick fix to prevent more damages.
No perceived side-effects so far.
Signed-off-by: David Cook <dcook@prosentient.com.au>
This is actually a perfectly good fix for this issue. I've changed
the explanatory comment to explain why.
Another option would be to remove the 'exists' check in the sub
_do_column_fixes_for_mod(), but this is just as functional.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Detailed comment on Bugzilla.
Adding a small follow-up.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The cronjob longoverdue.pl does not require that an item marked as lost
be returned automatically, but there is a line in ModItem that
automatically marks the item's onloan as false if itemlost is set!
Test Plan:
1) Mark an item as lost with longoverdue.pl, without --mark-returned
2) Inspect the db, note that items.onloan is now 0
3) Apply this patch
4) Mark repeat step 1
5) Inspect the db, noe that items.onloan is still 1
6) Test marking an item as lost from staff interface,
ensure there are no regressions.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Patch works according to test plan and fixes a data loss bug.
Some notes:
- This patch would be nicer with a regression test.
- Also checked that returning the item removes lost status and onloan still.
- Tried to test with --mark-returned, but couldn't get it to
return my item neither with nor without the patch. (see comment on
bug report)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes the $facets_info calculation from the _get_facets_data_from_record
sub so it is not done for each record. It introduces a new sub, _get_facets_info
that is called from the getRecords loop, that does the job only once.
To test:
- Apply on top of the previous patches
- Run
$ prove -v t/db_dependent/Search.t
=> SUCCESS: _get_facets_info gets tested and it passes for both MARC21 and UNIMARC.
Facets rendering should remain unchaged on the UI.
- Sign off :-D
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a test for field 100, to skip it on facet calculation
if ind1=z.
To test:
- Have IncludeSeeFromInSearches set.
- Create a biblio record, when adding an author, create a new authority record
that contains a 400$a field (see from).
- Rebuild zebra db.
- Search for the record making sure the search returns more than one record.
=> FAIL: the facets contain the 'see from' field.
- Run
$ prove -v t/db_dependent/Search.t
=> FAIL: it fails
- Apply the patch
- Run
$ prove -v t/db_dependent/Search.t
=> SUCCESS: it passes
- Re-run the search, notice the 'see from' doesn't show anymore on the facets.
- Sign off :-D
Edit: minor stylistic change
Regards
To+
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch refactors the facet extraction loop into a proper function.
The loop is changed so the MARC::Record objects are created only once
instead of the old/current behaviour: once for each defined facet (in
C4::Koha::getFacets).
To test:
- Apply the patch
=> SUCCESS: verify facets functionality remains unchanged.
- Run:
$ prove -v t/db_dependent/Search.t
=> SUCCESS: tests for _get_facets_data_from_record fail, because
100$a is considered for fields with indicator 1=z (field added
by IncludeSeeFromInSearches syspref).
- Sign off :-D
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Some libraries would like the ability choose to display the home branch
on search results while having circulation rules based on the holding
branch. This is currently impossible because both the display of the
branch in search results, and the selection of the home or holding
branch for circulation rules are controlled by the same system
preference: HomeOrHoldingBranch. This preference is described as being
used only for circulation rules, and makes no mention of its use for
display control. The display control should be split off into a separate
preference.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Note the value of the new system preference StaffSearchResultsDisplayBranch
matches the current value of HomeOrHoldingBranch
4) Set the preference to home branch
5) Perform a staff catalog search with results having items with differing home and
holding branches.
6) Note the home branch displays
7) Set the preference to holding branch
8) Repeat step 5
9) Note the holding branch displays
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, logic is now tied to a new system preference.
Passes tests and QA script.
Test Plan:
1) Set ExpireReservesMaxPickUpDelay
2) Set ReservesMaxPickUpDelay to 1
3) Place a hold, set it to waiting
4) Using the MySQL console, modify the waiting date and set it to the
day before yesterday.
5) Set today as a holiday for the pickup branch in question.
6) Run misc/cronjobs/holds/cancel_expired_holds.pl
7) The hold should remain unchanged
8) Remove today as a holiday
9) Run misc/cronjobs/holds/cancel_expired_holds.pl again
10) The hold should now be canceled
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Leila <koha.aixmarseille@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Patch sponsored by the CCSR ( http://www.ccsr.qc.ca )
This new patch builds on the work of Bug 12164 by allowing the
user to enter a new name (budget_period_description) for the
cloned budget.
A test was added to t/db_dependent/Budgets.t.
Sponsored-by: CCSR
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Edit: added the sponsored-by line.
Currently, if you have holds charges, they are not taken into
consideration when circulating items.
Manual Invoices, and rental charges are governed by a systempreference
Holds are never counted
And all other charges (overdues, lost items etc) are counted
This patch adds a systempreference to allow Hold charges to be counted
as well.
To test
1/ Set a borrower category to have holds charges
2/ Place a hold for a borrower in that category
3/ Go to checkout, notice that charge is not showing or blocking on
that screen
4/ apply patch
5/ notice that charge now shows on checkout
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This adds entries for 690-699 to the authorities linker, so they get
linked up like everything else.
To Test:
* make sure your framework doesn't have 690 set up to link to
authorities (or it'll get linked as part of cataloguing.)
* add a subject with some term to the 690$a field.
* add an authority for TOPIC_TERM with the matching term.
* make sure zebra is up to date.
* run link_bibs_to_authorities.pl over your system.
* check that the authority is now linked to your record.
* repeat with the other 69x fields if you like.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested using 696a (PERSO_NAME). Works as described, no errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This works as described, but linked authorities won't search
correctly when clicking on the link on the detail page,
as the 69x $9 is not indexed.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch makes GetMarcISSN test for empty subfield before pushing to the
result array.
To test:
- Run the regression test
=> FAILS for all MARC flavours
- Apply the patch
- Run the regression test
=> SUCCESS: tests pass
- Sign off
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The last test on the first series, fails randomly on Perl 5.18:
not ok 12 - Third query makes no difference
# Failed test 'Third query makes no difference'
# at t/db_dependent/Breeding.t line 104.
# got: ''
# expected: '1'
# Looks like you failed 1 test of 12.
not ok 1 - _build_query
This change makes tests pass. Please consider if this needs to be fixed
(i.e. sort order matters) or the test needs to be rewritten.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
I agree with adding the sort. (The need for doing this in Perl 5.18 is another
topic.)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Resolved:
[1] FAIL C4/Breeding.pm
FAIL critic ControlStructures::ProhibitMutatingListFunctions
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
No warnings anymore.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch only removes surrouding spaces at comma and equals-sign while
passing the options in sru_fields to the ZOOM object.
Test plan:
If you add spaces between options in sru_fields, searching should still work.
E.g. sru_fields= sru = get , sru_version = 1.1
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Use the stylesheets listed in field add_xslt of z3950servers to transform
search results of Z3950/SRU search.
Additionally, the template has been changed to make more error messages (or
warnings) visible when displaying results. Until now, error message were
shown in the results table and when connection errors occurred, no results
were displayed at all.
Test plan:
Create some stylesheets (or see the sample patch on bug 6536).
Add these stylesheets to some Z3950/SRU servers.
Do Z3950 search and verify the transformations.
Do a search with 2 targets; make one target fail (by manipulating its server
data). Do you see the connection error and the results for the other target?
Generate a XSLT error by modifying one stylesheet. Check search results. You
should see warnings.
Signed-off-by: Giuseppe Angilella <giuseppe.angilella@ct.infn.it>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch makes it possible to include SRU servers in Z3950 search.
It adjusts the Z3950Search routine in Breeding module.
It also replaces SQL code with DBIx statements in Breeding.pm/Z3950Search
and the associated scripts z3950search.pl in cataloguing and acqui.
Test plan:
Verify if a normal Z3950 search still works in cataloging/acqui.
Add a SRU target. (You could just use Koha's port 9998.)
Define sru_options like sru=get.
Use that target in a Z3950 search in cataloging and acqui. (Import.)
Test sru_fields translation by comparing search results between various
settings for some of the fields. For instance, leave title empty and
after that set it to the title field of your SRU target.
Signed-off-by: Giuseppe Angilella <giuseppe.angilella@ct.infn.it>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Replaces name by servername, type by servertype for running Z3950 search.
Limit search scripts to zed (z3950) servers until sru is supported.
Test plan:
Perform a Z3950 search in Cataloguing and Acquisition.
Verify that it still works as it did.
Signed-off-by: Giuseppe Angilella <giuseppe.angilella@ct.infn.it>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
With this patch, the subroutine NewOrder uses DBIx::Class instead of C4::SQLHelper.
Test plan:
1) Apply the patch
2) Execute the unit tests by launching :
prove t/db_dependent/Acquisition.t
3) The result has to be a success without error or warning :
t/db_dependent/Acquisition.t .. ok
All tests successful.
Files=1, Tests=79, 2 wallclock secs ( 0.04 usr 0.01 sys + 1.80 cusr 0.09 csys = 1.94 CPU)
Result: PASS
4) Log in the koha intranet and create a new order in the acquition module
5) The creation has to be a success
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Test pass, new order created without problem, no koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested creating a new order from a subscription, no problems found.
Passes tests and QA script.
This patch makes it possible to choose a particular contact for
acquisitions and serials claims. To test:
1) Select a contact to use for claiming late orders and a contact
to use for claiming late issues.
2) Send a claim for a late order and a claim for a late issue.
3) Note that the claims went out to the proper people.
4) Run the unit test with:
> prove t/db_dependent/Letters.t
5) Sign off.
Note: the claim messages are recorded in the logs in the *Acquisitions*
module, not the Letters module as you might expect
This patch also fixes several perlcritic violations and centralizes
contact-related unit testing in Bookseller.t.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Some vendors may have more than one contact. For example, a technical
contact and a billing contact, or a contact for journals and a contact
for monographs. Rather than require that each contact be either made
into a separate vendor or recorded somewhere outside of Koha, it would
be really useful of Koha had the ability to add multiple additional
contacts to vendors in the Acquisitions module.
To test:
1) Apply patch.
2) Edit a bookseller, making sure to add a contact.
3) View the bookseller's information, making sure the contact
information is there.
4) Run the unit test:
> prove t/db_dependent/Bookseller.t
5) Add multiple contacts to a vendor, see that they show up.
6) Delete one contact from a vendor with multiple contacts,
see that the result is correct.
7) Sign off.
Note: This test plan can supersede that on the previous two patches,
as all functionality of the previous two patches is required by this
one.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch normalizes the data structures used for bookseller
contacts.
To test:
1) Repeat tests described on previous patch.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
In preparation for adding the ability to handle multiple contacts, this
patch moves booksellers' contacts into their own class,
C4::Bookseller::Contact.
To test:
1) Apply patch.
2) Run database update.
3) Edit a bookseller, making sure to add a contact.
4) View the bookseller's information, making sure the contact
information is there.
5) Run the unit test:
> prove t/db_dependent/Bookseller.t
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This development introduces ColVis into Koha and provides a configuration
page for columns visibility.
ColVis is a plugin for DataTables. It allows to change the visibility of
the columns in the table.
* This development adds:
- the js and css file for ColVis
- a new DB table 'columns_settings'
- a new template plugin 'ColumnsSettings'
- a new package C4::Utils::DataTables::ColumnsSettings
- a new admin page admin/columns_settings.pl
* How it works:
A yaml file is created (admin/columns_settings.yml) in order to take an
inventory of all tables where ColVis is implemented. This file is read
to create the list of modules, pages and tables in the configuration
page.
There are 3 possible keys in the yml:
- is_hidden: default is 0
The column will be hidden.
- cannot_be_toggled: default is 0.
ColVis will allow to hide/show the column.
- cannot_be_modified: default is 0
Default values (in the yml) won't be modifiable.
When a user changes (or saves) the configuration for one module, all
columns are added to the DB table. The values in the DB get the upper hand
on the yaml values.
* Humm, strange?
It seems weird to have 2 storages for the same values. But I
think it will be easy to add an entry and maintain the yaml rather than
adding a new row (and new entry in updatedatabase script) in the DB.
* To go further: We can imagine that the configuration is saved for each
user (and not globally like it is made with this patch).
This patch cannot be tested as it, you need to apply the "POC" patch.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script, more comments on last patch.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
News will not display on the last day of each month due to the
way the date is calculated in the SQL code for grabbing news.
Test Plan:
1) Create a news item that should display
2) Change your server's date to the last day of the month
3) Note you can no longer see that news item
4) Apply this patch
5) Note you can now see your news item again
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If multiple registrations are submitted, the first patron to register
will be used for the first patron to click the registration confirmation
link!
Test Plan:
1) Submit 2 new patron registrations
2) Use the confirm link from the 2nd registration
3) Note you end up registering as the first submitted registration
4) Apply the patch
5) Repeat steps 1 and 2
6) Note you are now confirmed correctly
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Test plan appears to work fine, I have a feeling the sql could be
written better but can't come up with it on a Sunday morning
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described and fixes a critical bug.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
At the moment, $dateonly is set to true when $1 is defined. However,
since the regex capture group only includes the time, this flag will
only be set when there is a value that includes a time.
In effect, this means that timestamps are reduced to dates only,
while dates have 00-00-0000 added to them.
This patch keeps the logic but reverses the values, so that $dateonly
will default to true unless $1 is defined.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Overdue notices are using the MySQL date format and not the dateformat
in the system preferences.
Test Plan:
1) Enable checkout notices for a patron, make sure the date due is in
the notice.
2) Check out an item to that patron, note the date is in the mysql
datetime format
3) Apply this patch
4) Check out another item to the patron, not the date is now in the
preferred date format.
Signed-off-by: David Cook <dcook@prosentient.com.au>
I love this patch! It is the best solution to this problem that I've
seen. I think it is set up to perfectly handle dates in the notices.
Unfortunately, the $dateonly flag is backwards, so the time is stripped
from timestamps and 00:00:00 is added to dates without times.
I'm adding a follow-up to reverse the setting of this flag.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This changes the existing framework caching, which was using memoisation
if memcached was available, and memory in all cases, to use the
Koha::Cache system. This uses memcache if possible, and in-memory
otherwise. However it also clears the cache when the framework updates,
making sure that the changed version will be picked up.
Note that the in-memory cache clears itself after 10 seconds, so that if
memcached isn't available, this is the longest that old versions will
hang around.
Test plan:
* work through
http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=11842#c0
and make sure that the erronious result doesn't occur.
Note:
* The patch on bug 12041 is required for this to work.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The C4::Overdues::GetBranchcodesWithOverdueRules routine has a bug.
If a default rule *and* a specific rule exist, only the branchcode for
the specific rule is returned.
Test plan:
prove t/db_dependent/Overdues.t
and verify the unit tests are consistent.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To reproduce:
- Go to Tools > Import patrons
- Notice branchcode and categorycode don't have dropdown menus with
valid options.
- Notice dateofbirth, dateenrolled and dateexpiry don't have date-pickers
- Notice each input field is labeled with the column name instead of a
proper description.
To test:
- Apply the patch, go to Tools > Import patrons
- Notice branchcode and categorycode have dropdown menus with valid options,
and by default the empty value is selected.
- Notice that if you go into the dateofbirth, dateenrolled and dateexpiry
fields, a nice date picker widget appears.
- Notice each field is labeled with the field description, and that the
column name is conveniently shown at the right of the input field.
Important: test switching the ExtendedPatronAttributes syspref, and verify that
if enabled, the patron_attributes field appears, and also the checkbox selector
controlling the extended patron attributes import behaviour shows too.
Bonus points: Verify that on a different language, the descriptions get translated,
and the column names show correctly
Regards
To+
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script.
Works as described, no regressions found.
Dates are output in ISO/database format, this is ok.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes only instance in this file.
Problem is that there are many template files
involved. Most of them have other instances of
scrolling_lists but is a problem for other bugs,
they will depend on this.
What is replaced is a pulldown for delimiter choices.
In all but one case the code is the same (variable name change),
and I did a little tidy of the TT code
To test:
1. Apply the patch
In all the following cases, check delimiters pulldown (Output box, bottom right)
2. Go to Reports > Statistics wizard > Acquisitions
3. Go to Reports > Statistics wizard > Patrons
4. Go to Reports > Statistics wizard > Catalog
5. Go to Reports > Statistics wizard > Circulation
6. Go to Reports > Statistics wizard > Serials
7. Go to Reports > Statistics wizard > Holds
there is a bug here, pulldown next to this must show 'CSV' option,
but shows nothing. Will be fixed
8. Go to Reports > Other > Average loan time
9. Go to Reports > Top lists > Patron checking out the most
Here there is a 'Delimiter' label before delimiters, only case
10. Go to Reports > Top lists > Most-circulated items
11. Go to Reports > Inactive > Patrons who haven't checked out
There is and inconsistency here, name of option on reports page,
and name on this report, 'Patrons with no checkouts'
Followed test plan. Pulldowns display as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It is kosher now to use the Koha template toolkit plugin for retrieving
system preferences values. This followup does that.
It also changes the class for ids, for people considering this patch
introduces too much noise on the home screen being able to control
its visibility.
Regards
To+
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Enable staff to setting a text for OPAC user/pass information
Modified:
C4/Auth.pm
koha-tmpl/opac-tmpl/bootstrap/en/includes/usermenu.inc -add a text to the popup login page
koha-tmpl/opac-tmpl/bootstrap/en/includes/opac-main.tt -add a text to the main login page
Testing:
I Apply the patch
0) Search NoLoginInstructions preference
1) Add/modify a text
2) Open OPAC main page
3) Validate the text added under Login button
4) Click in "Log in to your account" link
5) Validate the text added under input password (popup)
Sponsored-by: CCSR ( http://www.ccsr.qc.ca )
Patch behaves as expected.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
On a Perl 5.18 environment (e.g. Ubuntu 14.04 LTS):
To reproduce:
- Have UseQueryParser == "Don't try"
- Perform a search typing just a word that would have many matches on your Zebra db.
- Take note of the search results count.
- Make sure you have the queryparser.yaml file in your config dir.
- Set UseQueryParser == "Try"
- Perform the same search a couple of times
=> FAIL: Notice that the search results count differs from one run to the other.
- Run the regression tests
$ prove -v t/db_dependent/QueryParser.t
=> FAIL: tests fail
To test:
- Apply the patch
- Run tests
$ prove -v t/db_dependent/QueryParser.t
=> SUCCESS: tests pass
- Repeat the steps 'To reproduce'
=> SUCCESS: Search results count is deterministic :-D
- Sign off :-D
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Now search with QueryParser always returns the correct number of
results on a system with the newer Perl version.
Passes all tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
A use C4::Charset was added deep in the body of the code
we have already imported it at the top of the file
(the by convention normal place) As use is executed at compile time
specifying it in the code body does not serve a
useful purpose and detracts from the readability of an already
overly complex subroutine.
Remove the superfluous statement
also removed the tabs introduced to the surrounding lines
by the same commit
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Search still works, no errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch covers LDAP auth_by_bind configuration so that wrong
LDAP password will return -1 to C4::Auth so we can abort local auth
and prevent users logging in with stale database passwords.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
http://bugs.koha-community.org/show_bug.cgi?id=8148
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
http://bugs.koha-community.org/show_bug.cgi?id=8148
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
CCSR having been deprecated there is no longer a use for the
OpacShowFiltersPulldownMobile system preference. This patch removes
it.
To test, apply the patch and run updatedatabase. Check that the
preference can no longer be found in system preferences.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Preference removed, no koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
When deleting a list the operation is blocked if there are items still
on the list, and the interface shows a warning which includes a count of
the items on the list. This count is broken for lists containing more
items than the number specified in the numSearchResults system
preference.
This patch corrects the item count to use an actual count of the total
number of results, not the total number of results in the first page of
results.
The template change to the staff client copies some language logic from
the OPAC template for dealing with a single number of list entries.
Test in both the OPAC and the staff client.
Check the number specified in the numSearchResults system preference and
locate or create a list containing more than that number of items. Try
to delete the list. You should receive a warning message stating the
correct total number of items on the list.
Test also with a list which contains fewer than numSearchResults
entries, and a list which contains zero entries.
Signed-off-by: Ian Beardslee <ian@catalyst.net.nz>
Tested Public and Private lists with 0, 5 & 25 entries, Public with 40 and Private with 45. Working as expected.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
