Previously, the SMSSendDriver system preference was set as a local use system
preference. This patch makes it an official system preference under the "Patron" tab.
This system preference determines which SMS::Send driver is used to send SMS messages.
I have attempted to take care to not overwrite this system preference if it has already
been set.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
The tests I wrote for C4::Items::GetItemsForInventory confused the differences
between biblionumber and itemnumber. That wasn't uncovered on my limited test
database, but I uncovered it later.
This fixes that problem by populating a $self->{'items'} list with details of any items
added by KohaTest::add_biblios. Then, tests can probe there for the details of items
they should expect to find when searching.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
When recommiting a partially completed MARC
record batch, records that were already imported
(or had an error status) were being processed
again, leading to duplicate bibs. Corrected
so that these records are actually ignored.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
This method was not documented. I added some POD to it.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
ran perltidy on the whole method since I've rewritten most of it.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
displayServers appears to have had old code in it that was no longer used. I'm removing it.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
The SQL call in displayServers was not using placeholders, leaving itself open
to potential SQL injection attacks. I've rewritten it to use placeholders.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
This test suite tests the several different ways that we can call C4::Koha::displayServers.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
Preference was removed in patch for bug 2234; completing
removal in existing 3.0 installations via DB rev 104.
No documentation changes (deprecation of noOPACHolds
done in an earlier patch)
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
This patch removes Image::Magick as a dependency and replaces it with
the (much) lighter GD. Functionality of patronimage code has not changed with
this conversion.
Adding errorhandling for corrupted image file and link to return to moremember.pl when called from there
Added notes about supported image mime types.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
C4::Koha::get_itemtypeinfos_of was not using plceholders, opening itself up to
potential SQL injection attacks. This patch refactors it to use placeholders to
bind parameters.
I also had to extend C4::koha::get_infos_of to allow us to pass bind parameters into it.
I'm including a test module for C4::Koha::get_itemtypeinfos_of.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
This patch changes all $foo eq undef's to !defined($foo). It also makes misc/spellcheck_suggest/build_spellcheck_suggest.pl have proper syntax.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
This patch corrects what appears to me to be a few defficiencies in the documentation
for C4::items::GetItemsForInventory. I noticed them while writing test methods for this sub.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
The SQL in C4::Items::GetItemsForInventory wasn't using placeholders and
bind parameters, possibly leaving itself open ot SQL injection attacks. This
patch changes that.
I've also incliuded a test module for C4::items::GetItemsForInventory.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
Here are a few improvments to the test suite to make it easier to write some tests
for C4::Items
I extracted "tomorrow" and "yesterday" methods from a test module into the base class
so that they could be used by multiple test modules
Adding callnumber to items added in the test suite.
I recatored KohaTest::add_biblios a bit to remove the manual count of the number of
MARC::Fields that were added.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
This checks that the enrolmentfee for a category both exists, and is greater than 0, avoiding a spurious charge.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
This patch adds code to clean out any NULL fields in rows returned
since NULL fields do not truly meet the filter criteria
It also corrects a bad db field reference.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
If a new order was created and no fund selected, a db error was thrown due to the
'bookfundid' field being set to NULL. This patch sets the first fund retrieved from
available funds as the default selection in the scrolling list.
A further enhancement might be to allow the library to choose which fund is the
default fund.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
From the bug report:
The serialsadditems syspref was ostensibly removed in DB rev 071
(http://git.koha.org/cgi-bin/gitweb.cgi?p=Koha;a=commit;h=5c41ae54e68866f9661e853376537059f4d83f70)
in favor of a new serialsadditems column in the subscription table.
However, this removal was incomplete. It is still created for new installations by:
installer/data/mysql/en/mandatory/sysprefs.sql
installer/data/mysql/fr-FR/1-Obligatoire/unimarc_standard_systemprefs.sql
and is used in
serials/serials-recieve.pl
serials/serials-edit.pl
admin/systempreferences.pl
Since the system preference was not removed from the sample data scripts, it
is necessary to add another DB rev to remove it - a user may have made a
fresh install of Koha after DB rev 071.
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
The current serialitems table structure does not provide for a *:1 relationship with
the serial table. This causes a problem when attempting to add multiple items to a given
serial. The db throws an error when attempting to INSERT in serialitems due to serialid.serialitems
being a unique key. A further side effect is that the marc record is updated with the
item inspite of the error. The mods to the serialitems table structure in this patch
drop serialid.serialitems as a key and make itemnumber.serialitems the primary key
creating a *:1 relationship with the serial table. This patch also makes serialid.serialitems
a foreign key referencing serialid.serial to maintain referential integrity.
Fix for duplicate barcode check
Signed-off-by: Galen Charlton <galen.charlton@liblime.com>
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
Support multiple timezones via Apache SetEnv. See the perldoc for
admin/env_tz_test.pl on how to configure and test. Minimal changes
to Context itself.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
1. restores a check to itemtype.notforloan to set the norequests flag
2. changes improper boolean OR with AND for checking conditions of setting norequests
3. displays 'Not for loan' for item-level itypes when the itemtype is set to notforloan
4. restores items.notforloan values < 0 allowing holds (ordered items for instance)
We still need a notforhold flag set at the itemtype, and items level
