When using zebra with IncludeSeeFromInSearches on, with traced series, the rejected
forms (4XX) of series entries are visible in result lists, both in OPAC and intra
interfaces.
Test plan:
=========
1. Have a MARC 21 installation with zebra, and with IncludeSeeFromInSearches on.
Have an authority records for series (130, or 100/110/111 with
title) with rejected forms (4XX fields). So the auth record should
contain at least:
130 _0 $a Series title
430 _0 $a Some other title under which the series in known
Use (each) authority record in at least two biblio records (in appropriate
fields, i.e. 800/810/811/830 or even deprecated 440, if it makes use
of UNIF_TITLE).
Don't forget to properly input also 490 (for 8XX). So the biblio record
shold contain at least:
245 nn $a Work title.
490 1_ $a Series title
830 _0 $a Series entry $9 <koha_id>
Reindex.
2. Perform a simple biblio search (in OPAC and in intra) with the title
from auth record.
3. You shold get a list of results. See the Series information--you
shold see not only the accepted entry from 1XX in auth but also the
rejected forms from 4XX.
4. Apply the patch.
5. Repeat 3. You shold see only the entry form of series now.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Since Bug 14715, one can change number of results per page.
The actual text in combobox for default value is : "Library default:
20"
This text is hard to translate correctly.
For example french translation use "site par défaut" wrongly meaning
"default library".
I propose to simply use "20 (defaut)".
Test plan :
1) Go to system preferences and set both 'numSearchResultsDropdown' and
'OPACnumSearchResultsDropdown' to 'Show'
2) Do a catalogue search in the intranet using a search term that will
bring lots of results
3) Look at restults per page combobox
4) Same for OPAC
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The patch "Bug 31313: Fix availability - OPAC
opac-detail" (70cb4e22c0) caused the OPAC detail page only show
"Available" status even when the item was in transit.
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The patch "Bug 31313: Fix availability - OPAC
opac-detail" (70cb4e22c0) cause the OPAC detail page only show
"Available" status even when there were waiting holds.
The onhold item field is removed at the same go as it was confusing
and unused since "Bug 2655: Fixes availabilty counts if items are on
hold shelf. Patch (2/2)" (a37545eb1)
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
1. Mark othernames as required via PatronSelfRegistrationBorrowerMandatoryField
2. Go to the self-reg form, the field is required but the span that makes it look required stays hidden. (<div class="required_label required">Required</div>)
3. Mark initials as required via PatronSelfRegistrationBorrowerMandatoryField.
4. Now the label_required field appears for othernames in the self ref form
5. Apply patch
6. Try again, the label should now properly show when othernames is marked as required
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Moving to an ajax datatable and paging would be a future fix, this restores
lost functionality
To test:
1 - Find or create a title with 20 items
2 - Place a hold in opac
3 - Attempt to select a specific item
4 - Note only 10 show
5 - Apply patch
6 - All items show
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch replaces opac-ratings-ajax.pl with a new REST API route
POST /public/biblios/42/ratings
Note that we could go further and refactor the 'start_rating' select
code.
Test plan:
Test the "star ratings" feature at the OPAC, on the different page
where it's displayed.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Found dateofbirth so far, do we have others?
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This is because opac-detail.tt has coce-coverimg as an ID, but OPAC
coce.js targets coce-coverimg as a class.
opac-detail.tt should be changed to have coce-coverimg as a class.
Test plan:
1. Set your system preferences:
- CoceHost = https://coce.mykoha.co.nz
- CoceProviders = Select all
- OpacCoce = Enable
2. Add the ISBN of '9780262336499' to a biblio
3. Open a "Incognito" window in your browser (recommended to use Google
Chrome to test this)
4. View the biblio detail page in the OPAC. Observe a 'Coce image from
Amazon' box loads with a spinner
5. Apply patch and restart services
6. Clear your browser cache
7. Reload the same biblio detail page in the OPAC. Observe no image is
displayed.
8. View another OPAC biblio detail page that does have a successfully
loading coce image and confirm the source of that image is listed: For
example 'Coce image from Amazon.com' is displayed
Sponsored-by: Toi Ohomai Institute of Technology, New Zealand
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds an explanation when a hold cannot be placed, in some situation:
tooManyReserves
tooManyHoldsForThisRecord
tooManyReservesToday
itemAlreadyOnHold
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This page utilises the Additional Contents feature to add custom pages
to the staff client and the OPAC in the user's desired language.
To test:
1. Apply patch and restart services
2. In the staff client, go to Tools, then go to the new 'Pages' page
3. Add a new page to display on both the staff client and OPAC.
4. Confirm the URLs in the Page URL column work as expected.
5. Confirm that any pages made for the staff client only do not show in
the OPAC, and that any pages made for the OPAC only do not show in the
staff client.
6. Confirm that pages do not show on the OPAC main page where news items
show. Confirm news items show on the OPAC main page as expected.
Sponsored-by: Chartered Accountants Australia and New Zealand
Signed-off-by: Thibault Kero <thibault.keromnes@univ-paris8.fr>
Signed-off-by: Lisette Scheer <lisettePalouse+Koha@gmail.com>
Signed-off-by: Lisette Scheer <lisettePalouse+Koha@gmail.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds "Required" label on mandatory fields for Article Requests
0. Apply the patch
1. koha-plack --restart kohadev
2. Change syspref 'ArticleRequests' to 'Enable'
3. Change syspref 'ArticleRequestsMandatoryFields' to '[Select all]'
4. Go to http://localhost:8080/cgi-bin/koha/opac-search.pl?idx=&q=test&weight_search=1
5. Click "Request article" for "Gairm"
6. Note that "Title", "Author", "Volume", "Issue", "Date", "Pages", and
"Chapters" all say required
7. Change syspref 'ArticleRequestsMandatoryFields' to 'Title' and
'Author'
8. Go to http://localhost:8080/cgi-bin/koha/opac-request-article.pl?biblionumber=29
9. Note that only "Title" and "Author" say required
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 27272 is going to remove C4::Items::GetItemsInfo in favour of Koha::Items->search_ordered.
Here we are going to deal with opac-reserve
Test plan:
List items on the modified view and confirm that all the info is
displayed correctly
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Has to move some code to a method
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 27272 is going to remove C4::Items::GetItemsInfo in favour of Koha::Items->search_ordered.
Here we are going to deal with opac-detail
Test plan:
List items on the modified view and confirm that all the info is
displayed correctly
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
-Have some Syndetics credentials
-Turn on SyndeticsCoverImages
-Look at some and you'll notice that Syndetics cover images dont always load
-If you view the page source you'll see why. The links are built like this:
https://secure.syndetics.com/index.aspx?isbn=/LC.GIF&amp;client=bedf&type=xw10&upc=843501038123&oclc=1311289389
-Apply patch
-Cover images should load properly.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. I used the following suggestiondates:
MariaDB [koha_kohadev]> select suggesteddate from suggestions;
+---------------+
| suggesteddate |
+---------------+
| 2022-01-03 |
| 2022-08-09 |
| 2022-02-22 |
| 2021-01-21 |
+---------------+
2. Set the dateformat system preference to 'mm/dd/yyyy'.
3. Try sorting the suggestion table by date, ascending and descending,
it is not right.
4. Apply patch
5. Try sorting by date again, ascending and descending, it should now
sort correctly.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the style of the time selection controls so that it
is clearer that they are elements which the user can interact with. The
times are now styled as buttons, and a check-mark icon is added when a
time is selected.
Also changed: Pickup date and notes fields are hidden until a library
has been selected. The count of existing appointments has been removed
in favor of showing the count of available appointments. A tooltip has
been added: "Appointments available: X"
I also changed the way the date selection event is fired. I found that
jQuery's "change" event on the input itself was not reliable for some
reason. I implemented instead an "onClose" event using the flatpickr
instance.
Note: The patch contains some indentation changes.
To test, apply the patch and enable and configure curbside pickups if
necessary. You should have at least two libraries with curbside hours
defined.
- Log in to the OPAC and go to "your curbside pickups."
- Under the "Schedule a pickup" tab you should see only the option to
select a library.
- When you select a library the "Pickup date" field should appear.
- When you select a date the time-selection buttons and the notes field
should appear.
- Hovering over a time should trigger the "Appointments available"
tooltip.
- Clicking a time should cause the "button" to turn green with a
check-mark icon.
- Submit a pickup request and confirm that it is saved correctly.
- Return to the "Schedule a pickup" form and confirm that selecting the
same library again triggers a message, "You already have a pickup
scheduled for this library."
- Select another library and another date.
- Switch your library selection to the library you already have a
request for. The date, time, and notes fields should be hidden again
and the same message triggered about already having a pickup
scheduled.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 27272 is going to remove C4::Items::GetItemsInfo in favour of Koha::Items->search.
Here we are going to deal with opac-sendbasket
Test plan:
List items on the modified view and confirm that all the info is
displayed correctly
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It's ugly to move the li to the include file, but it's the easiest for
now...
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Requested by QA, see comment 26.
Sponsored-by: Orex Digital
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
See comment 26:
$6 is a very specialized field that will never contain a URL. Linkage here means 'linking MARC fields within the record'. For example it is used to link an original script tag with the corresponding tag in transliteration. See: https://www.loc.gov/marc/authority/ecadcntf.html
Sponsored-by: Orex Digital
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Orex Digital <info@orex.es>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This new enhancement add the capability to list the different
identifiers of authors. It is helpful for research publications for
instance.
This patch will add a new "Author identifiers" tab on the detail page
(OPAC) of a bibliographic record, with the list of the authors and their
identifiers.
On the detail page of the authority record, the same identifier list
will be displayed.
Test plan:
Create some authority with
024
$a source
$2 number
$6 link to the source
With the pref turned ON you will be able to see the new information.
Sponsored-by: Orex Digital
Signed-off-by: Orex Digital <info@orex.es>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1 - Enable DumpSearchQueryTemplate
2 - Confirm you can find the search query in the HTML as a comment
3 - Enable other template dump preference
4 - Confirm they work as before
5 - Confirm new description of preference makes sense
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a way for patrons to change the pickup location for in
transit holds.
This is done in the OPAC on the holds table.
The feature is controlled by a new system preference:
* OPACInTransitHoldPickupLocationChange
To test:
1. Apply this patches
2. Run:
$ updatedatabase
$ restart_all
=> SUCCESS: system preference added
3. Have an in-transit hold for a known patron
4. Visit the holds table for the patron (OPAC)
=> SUCCESS: Hold in transit, cannot change pickup location
5. Enable the OPACInTransitHoldPickupLocationChange system preference
=> SUCCESS: Descriptive text makes sense and is idiomatic
6. Reload the OPAC page
=> SUCCESS: You can now choose a new pickup location
7. Choose one
=> SUCCESS: It works! Reloaded page pre-selects the new pickup location
8. Switch to the new pickup location library on the staff interface
9. Go to Circulation > Transfers to receive
=> SUCCESS: The hold is there!
10. Scan the hold
=> SUCCESS: Usual workflow follows
11. Sign off :-D
Sponsored-by: Montgomery County Public Libraries
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Before this patch the date formatting for the due date was done
in the .pl instead of the template and the branchcode would show
instead of the library's name in the list of items when placing
an item level hold in the OPAC.
To test:
* Find or create a record with mulitple items
* Check out one of the items
* Place a record level hold
* Return an item to set to waiting
* Place an item level hold
* Go to the OPAC and start placing an item level hold
* Verify the messages in the item table show the branchcode
* Apply patch
* Only visible change should be the library name replacing the branchcode
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The YAML preference definition defines it as a string ('yes' or 'no' the
possible values). And the opac-suggestions.tt template has one occurence
of the variable being compared to a string.
This patch does:
- fix the template
- fixes opac.pref for 0|1
- adds an atomicupdate that takes care of moving 'yes' and 'no' to their
respective boolean values.
To test:
1. Change the syspref value to enable/disable
2. Check on the DB that the value is wrong:
$ koha-mysql kohadev
> SELECT value FROM systempreferences WHERE variable='OPACSuggestionAutoFill';
=> FAIL: It is either 'yes' or 'no' depending on what you choose.
3. Apply this patch
4. Run:
$ updatedatabase
5. Repeat 2
=> SUCCESS: Values are now 0 or 1
6. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a helper method for filtering out cancellation
requested-holds from resultsets, and makes use of it in the OPAC to
filter out those in the current holds tab. Holds history now shows
'Waiting (cancellation requested)' on those.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Sponsored-by: Montgomery County Public Libraries
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
* Curbside pickups are not enabled for your location. = library
* Pickup Date/Time = capitalization
* ... it is an holiday = it is a holiday. (multiple)
* Deliver Date/Time = capitalization
* There is no waiting holds for this patron at this location. = There are no... at this library
* No pickup time define for this day. = defined (multiple)
* You don't have waiting holds at this location = library
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
dayjs init was not passing the dateformat.
We really need to clean the date handling with the following two bugs:
Bug 30310 - Replace Moment.js with Day.js
and
Bug 30718 - Use flatpickr's altInput option everywhere
But it's outside the scope of this bug report.
Signed-off-by: Koha Team University Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Koha Team University Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Koha Team University Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Don't get stuck in an infinite loop
Signed-off-by: Koha Team University Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Koha Team University Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We could improve this more and add disable the holiday from the date
picker widget, but it's out of the scope here.
Sponsored-by: Association KohaLa - https://koha-fr.org/
Signed-off-by: Koha Team University Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Sponsored-by: Association KohaLa - https://koha-fr.org/
Signed-off-by: Koha Team University Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Sponsored-by: Association KohaLa - https://koha-fr.org/
Signed-off-by: Koha Team University Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Sponsored-by: Association KohaLa - https://koha-fr.org/
Signed-off-by: Koha Team University Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch switches to Bootstrap tabs anywhere in the OPAC where
jQueryUI tabs were used.
To test, apply the patch and rebuild the OPAC CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- Test the item type/collection/shelvinglocation tabs on the advanced
search page. Test that it works correctly with different variations of
the OpacAdvancedSearchTypes system preference.
- Search for an authority record and view the details. The "Notes"
tab should be styled correctly.
- Locate a bibliographic record and view the detail page. Verify
that tabs are working, including all the options:
- Holdings
- Other holdings ( If OpacSeparateHoldings is enabled)
- Descriptions ( MARC notes )
- Subscriptions
- Serial collection (UNIMARC, untested)
- Components ( If ShowComponentRecords is enabled. Link to sample
record:
https://bugs.koha-community.org/bugzilla3/attachment.cgi?id=78023 )
- Comments
- Editions (OPACFRBRizeEditions)
- Html5media ( If HTML5MediaEnabled is on. Link to sample records:
(https://bugs.koha-community.org/bugzilla3/attachment.cgi?id=10685)
- Images ( If OPACLocalCoverImages is enabled )
Bonus points for testing these tabs for which I don't have
credentials:
- Syndetics TOC
- Syndetics Excerpt
- Syndetics Reviews
- Syndetics AuthorNotes
- LibraryThing for Libraries (with LibraryThingForLibrariesTabbedView
set to "in tabs."
- NovelistSelect
- Check tabs on these patron-related pages:
- Checkout history
- Search history
- Patron summary. The following tabs are
✓ Checkouts
✓ Relatives' checkouts
✓ Overdues
✓ Fines
✓ Relatives' fines
✓ Holds
✓ Recalls
✓ Article requests
✓ Overdrive
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Bug 30570: (follow-up) Correct rebase errors
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Share a list with a patron that has no email address.
Try to transfer ownership. Verify that you get the error message.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Pick or create a shared list. Login as owner.
Transfer to one of the other members.
Verify that you do no longer have Transfer, but see Remove share.
Login as the other member. Transfer it back.
Bonus: Working with two tabs, you can open the Transfer form and
in the meantime delete the list, the patron or remove the share.
Or change permissions. Submit after that and check the error message.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Pick or create a shared list.
Verify that OPAC only shows the Transfer button when you are the
owner of a shared list.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch addresses the case of links that are generated on the XSLT
side, those linking to and from host records using 773$t and 773$a.
To test:
1. Pick a bibliographic record (I chose 'Unconditional' from the sample
data
2. Add " and ? to the title statement. I changed it to
'Uncond"itional?¿'
3. Add a child record to it
4. Open the detail page for the host record
=> FAIL: It doesn't show the 'Show analytics' link
5. Repeat 4 for the same record, in the OPAC
=> FAIL: It doesn't show the 'Show analytics' link
6. Apply this patch
7. Repeat 4 and 5.
=> SUCCESS: Links are shown!
8. Follow the links
=> SUCCESS: The links take you to the right resultset!
9. Go to the child record, and notice the link back to the parent works
:-D
10. Sign off :-D
Sponsored-by: Theke Solutions
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes the use of templates and CGI in ExplodedTerms by using the
Koha::I18N library.
The functionality on the package is too simple, and messing with the
template paths complexity on the tests was too much, given we have a
nice way to have translatable strings at the package level.
This patch does that, and cleans up the test file as well, that required
complex template and CGI mocking to run properly.
To test:
1. Run:
$ kshell
k$ prove t/db_dependent/SuggestionEngine_ExplodedTerms.t
=> FAIL: It fails in master
2. Apply this patch
3. Repeat 1
=> SUCCESS: Tests pass
4. Follow the original test plan
=> SUCCESS: Things work
5. Enjoy the rest of the day and forget this ever happened
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
== test plan ==
1. Enable "Did you mean?":
. go to Administration > Additional parameters > Did you mean?
. put a tick in each plugin and save the configuration
2. In the OPAC, search for 'open source'
3. Without the patch you see escaped <span> after "Did you mean:"
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1) Install another language and enable it in the OPACLanguages system preference
2) Also make sure opaclanguagesdisplay is set to Allow
3) Make sure OpacLangSelectorMode is set to display the switch in the footer (either top and bottom or footer only)
4) Turn on recalls
4.1) In Administration > Global system preferences, enable UseRecalls
4.2) Add recalls permissions in your circulation rules
5) In the OPAC, log in as a patron
6) Find a record with checked out items and place a recall
7) Go to your account
--> Note that the language switch is at the bottom left of the screen
8) Click on any tab in the patron's account
--> Note that the language switch is at the bottom left of the screen
9) Click on 'Your recalls history'
--> Note that the language switch is right under the recalls history table
10) Apply patch
11) The changelanguage div should now be properly placed at the bottom of the page.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the 'In bundle: Link' to the OPAC to mirror what we have
on the staff client.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan
Login to staff interface
Go to Administration. Search EnableExpiredPasswordReset. Enable this preference. Save.
Find your patron record and go to details.
In the ‘OPAC/Staff interface login’ section, set the Password expiration date to the previous day. Save.
Open the OPAC in a new window.
Login to your account. It will fail. Click Reset your password.
Follow the process to add a new password. Click update password.
See that it says ‘Go to staff interface’
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch modifies the biblio-title include so that it can be used to
link to the bibliographic record using the default biblio view.
On pages where the biblio-title include was wrapped in an anchor tag, a
link parameter is added: [% INCLUDE 'biblio-title.inc' link=> 1 %]
To test, apply the patch and view the following pages in the OPAC to
confirm that titles are displayed correctly and that the link to the
bibliographic record is correct:
- Log in to the OPAC: On the "your summary" page, check checkouts,
overdues, holds, and article requests.
- Check the "your holds history" page.
- Locate a bibliographic record and click "Save to your lists."
In the popup, the title should be displayed correctly without a link.
- Place a hold, and check the hold confirmation page.
- Check the "Recent comments" page.
- Locate a record which has a local cover image attached, and view the
image.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch corrects OPAC templates which tried to use a jsTree image
asset which is missing following the jsTree upgrade (see Bug 11873).
Templates should use /images/spinner-small.gif instead.
To test, apply the patch and enable OpenLibrarySearch and populate
OverDrive and RecordedBooks preferences with credentials (they don't
have to be valid).
Perform a catalog search in the OPAC. When the search results page first
loads you should see messages about the services being queried:
Searching OpenLibrary...
Searching RecordedBoks...
Searching OverDrive...
Each should show a working "spinner" image while the queries are being
performed. If you have valid OverDrive credentials you can try clicking
through to the OverDrive search results page to confirm that the image
is working on that page too.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Several fixes :
- Replace tab with spaces
tag_210 :
- Class 'value' and not 'valeur'
- Loop on subfields must restrict to abcdg otherwise last() may not be
correct (ie 214r and 214s)
tag_214 :
- Condition for coma after b should be same as after a : "position() != last()"
tag_210 and tag_214 :
- Space before ':' like in other fields
- ':' before c or g does not exist in opac, removed from intranet file
- Search links in intranet fixed (where composed with opac-search ^^)
- Search links using 'str:encode-uri' like other places
- Simplify title attribute with only 'Search for publisher' => Bad idea
to use double quotes in a text
tag_214_s and tag_214_r :
- Loop on field+subfield otherwise last() may not be correct
I've fixed intranet and copied to OPAC (only adapted search links)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomás Cohen Arazi <tomascohen@theke.io>
test plan :
- Apply patch
- Find a record with a B214
- Check on both Opac-Details and Opac-Result that the field is
displayed.
- Do the same checks on catalogue/search results and catalogue/details
in Staff interface.
- Add a 210 field to the record (legacy)
- It should be displayed as well
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomás Cohen Arazi <tomascohen@theke.io>
This patch updates the jQuery Validation plugin in both the OPAC and
staff interface. This upgrade brings the plugin to the current latest
version (1.19.4) which includes compatibility fixes for the latest
version of jQuery.
To test, apply the patch and test various forms in the OPAC and staff
interface to confirm that validation is still working correctly.
In the OPAC:
- Patron self-registration: Required fields, password match
and complexity. Test also the "Forgot password" and "Change password"
interfaces.
In the staff interface, for example:
- Patrons -> Patron password change: Required fields, password match and
complexity.
- Administration -> Patron categories -> New category:
- Required fields
- One or the other enrollment period inputs
- Digits required in password expiration, age required, upper age
limit
- Numbers required in enrollment and hold fee.
- Administration -> Budgets -> New budget:
- Required fields
- End date must be after start date
- Administration -> Cities & towns: Required fields
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomás Cohen Arazi <tomascohen@theke.io>
Test plan:
0. Apply patch
1. Go to http://localhost:8081/cgi-bin/koha/admin/preferences.pl?op=search&searchfield=OPACUserCSS
2. Set syspref to the following:
.local-login {
display: none;
}
3. Go to http://localhost:8080/cgi-bin/koha/opac-main.pl
3b. Note that the local login boxes are hidden
("Log in to your account:" remains so that other login options can
be supplied by OpacUserJS)
4. Click on "Log in to your account" on the top toolbar
4b. Note that the local login boxes are hidden
("Log in to your account:" remains so that other login options can
be supplied by OpacUserJS)
5. Go to http://localhost:8080/cgi-bin/koha/opac-user.pl
5b. Note that the local login boxes are hidden
("Log in to your account" remains so that other login options can be
supplied by OpacUserJS)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomás Cohen Arazi <tomascohen@theke.io>
The C4::Suggestions::SearchSuggestion subroutine is badly written and
can be replaced by calls to Koha::Suggestions->search.
The hard part in this patch is suggestion.pl, the other occurrences have
been replaced easily.
Test plan:
The idea is to test the whole suggestion workflow.
1. Create a suggestion on OPAC
2. Create a suggestion on the staff interface
3. Edit suggestions
4. Filter suggestions (use the different filters and "organize by"
values)
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 23991: Remove SearchSuggestion tests
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 23991: (QA follow-up) Save some DB queries
This patch makes the suggestion-related pages rely on array size instead
of querying the DB each time they need to. In the case of
suggestion/suggestion.pl it goes from 4 COUNT(*) to 1.
To test, with KTD:
1. Run on the host machine:
$ docker exec -ti koha_db_1 bash
$ mysql -ppassword
> SET GLOBAL general_log_file='/var/log/mysql/mycustom.log';
> SET GLOBAL log_output = 'FILE';
> SET GLOBAL general_log = 'ON';
> \q
$ tail -f /var/log/mysql/mycustom.log | grep suggestions
2. Visit the different pages changed on this bug
=> SUCCESS: Some queries
3. Apply this patch
4. Repeat 2
=> SUCCESS: Less queries!
5. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 23991: Fix branchcode and budgetid filtering
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 23991: Fix conflict with bug 28941
Well, this patchset fixed the security bug...
Redoing on top of bug 28941
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 23991: (follow-up) Missing semicolon
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 23991: Fix 'all' libraries
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 23991: (follow-up) Add value to filter_archived
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds two new sysprefs:
ComponentSortField
ComponentSortOrder
These allow the user to choose how components should be sorted when displaying on the details page
of a record, and the corresponding search for all components
This also updates our search from simple_search_compat to search_compat to allow for sorting options
Note:
Some sorting under ES is unclear - this is a separate issue to be invesitgated
Our Zebra index does not offer 'record number' sorting, I will file a bug for that
To test:
1 - Enable UseControlNumber (or not)
2 - Add some components to a record by control number or title depending on above
3 - Enable ShowComponentRecords syspref
4 - View the record that has components
5 - Note they are not sorted
6 - Apply patch, updatedatabase
7 - reload record
8 - Note components are sorted by title ascending
9 - Try different values for ComponentSortField and ComponentSortOrder
10 - Confirm sorting changes with system preferences
11 - Repeat test on staff and opac, with ES and Zebra search engines
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The construct of [% ELSE %]0[% END %] breaks translations as it is
translated as [% ELSE %][% END %]. Note: No 0 in the ELSE statement.
This patchset either removes occurances of a lone 0 in template ELSE
statements, or splits it over multiple lines so the 0 is not removed in
the translated templates.
Test plan:
1. Install the en-NZ translation
2. Search the translated templates for '[% ELSE %][% END %]' and confirm
there are are instances of that
3. Apply patch
4. Update your en-NZ translation
5. Repeat step 2 and confirm there are no more instances of [% ELSE %][%
END %] in the translated templates
Note: I removed the [% ELSE %] statement from opac-bottom.inc as that
statement was empty in the en translation so it didn't look to be
needed.
Sponsored-by: Catalyst IT, New Zealand
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the new 'Middle name' field to the patron record.
To test:
1) Apply patches
2) Update database, restart all and clear the browser cache
3) Load a patron in the staff module
4) Confirm you can see and edit the new 'Middle name' field
5) Confirm the new middle name data displays on patron details
6) Confirm the new middle name data displays on patron search results
7) Confirm the new middle name data displays everywhere patron names are
displayed.
8) Confirm the new middle name data displays on the OPAC
9) Confirm the 'Middle name' field appears in the OPAC borrower
modification screens
10) Edit sysprefs `BorrowerMandatoryFields`, `BorrowerUnwantedFields`,
`SelfModificationBorrowerUnwantedField`, `PatronSelfModificationMandatoryField`,
`PatronSelfRegistrationBorrowerMandatoryField` and
`PatronSelfRegistrationBorrowerUnwantedField` to confirm you can make
the new field required or hidden.
11) Verify that DefaultPatronSearchFields contains the new field if you
already had 'firstname' in the field list
12) Enable PatronAutoComplete system preference
13) Type patrons surname into checkout or patron search but don't hit
return
14) Confirm the patrons middle name is displayed in the preview
15) Go to tools > patron lists and attempt to add a patron to a list
16) Patrons middle name should appear in the autocomplete here too
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Note: You will need a valid OverDrive subscription to test this.
This patch fixes a JavaScript error thrown on the OPAC overdrive search
results page for libraries using translation templates and who don't
have the OverDrivePasswordRequired system preference = 'Required'.
Test plan:
1. Install the en-NZ translation: https://wiki.koha-community.org/wiki/Installation_of_additional_languages_for_OPAC_and_INTRANET_staff_client
2. Enable the en-NZ language:
- In the OPACLanguages system preference -> tick 'English New Zealand
(en-NZ)' checkbox and untick 'English (en)'
3. Fill in the OverDrive system preferences:
- Make sure you set: OverDrivePasswordRequired = "Not required"
4. Perform an OPAC search
5. Click on the Overdrive results link
6. Open the browser console and notice there is a JS error, and the
OverDrive results do not load
7. Apply patch
8. Update the en_NZ translation:
9. Repeat steps 4, 5 and 6 and notice there is no JavaScript error and
the OverDrive results do display
Sponsored-by: Melbourne Athenaeum Library, Australia
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This fixes 2 links on the page:
* The tag within the 'all tags' cloud
* The tag shown in the 'your tags' table
Test plan as before: Test with a tag like +++
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
TO test:
1. Turn on: TagsEnabled.
2. Log in to the OPAC and create a tag like "LGBTQ+"
3. Add that record to a list
3. Now try clicking on that tag from detail, results, and lists page.
4. If you click on the link for the "LGBTQ+" you will get a 'no results found page'.
5. Apply patch
6. Try clicking on each of the tags in detail, results, and lists. They should work now.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In bug 28959 category was replaced in favor of public. But
unfortunately a few places were missed.
This fixes the addbybiblionumber templates.
Test plan:
Add a biblio to a list from the search results using the Add to
or Add to list button on OPAC/intranet.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
They need more complex solutions that would be better in a follow up ticket
to not drag this one too long.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In the 1st patch, sometimes they where left out
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
And a few minor fixes when they where causing issues for
translatability.
And rephrased a string about password reset to have it identical to
other strings with the same meaning.
Simplified via wrapping strings with <span> to split to huge
concatenated strings with a lot of %s everywhere.
== Test plan ==
This patch needs mainly proof reading. Still it's possible to do some
basic testing to demonstrate that adding a <span> in an IF doesn't
break anything.
Pick in one of the 110 modified templates a string that you know how to
display. Otherwise:
1. acquisitions => vendor => basket => add to basket =>
search "from existing record" => add order
2. Cancel the order
3. You see without issue "Bibliographic record will not be deleted"
4. administration => Patron categories
5. Try to delete a used and unused category
6. You see as expected
Category XXXX is in use. Deletion not possible!
and
Confirm deletion of category XXXX
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This fixes a couple cases actually.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a check for the OPACHoldRequests to determine whether a
message should be shown to patrons whose account is over the
maxoutstanding limit.
To test, apply the patch and set the "maxoutstanding" system preference
to a low value. Set OPACHoldRequests to "Allow."
- Log in to the OPAC as a patron who has outstanding fines or charges
which exceed the maxoutstanding value you set.
- You should see a message on the "Your summary" page, "Holds are
blocked because your fine balance is over the limit."
- Set OPACHoldRequests to "Don't allow" and refresh the "Your summary"
page in the OPAC. The message should disappear.
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves the not-generic virtualshelf-related exceptions to
their own file. Callers are adjusted as required.
To test:
1. Run:
$ kshell
k$ prove t/db_dependent/Virtualshelves.t
=> SUCCESS: Tests pass
2. Apply this patch
3. Repeat 1
=> SUCCESS: Tests pass
4. Check virtualshelves work as expected
5. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Empty PatronSelfRegistrationBorrowerMandatoryField and PatronSelfRegistrationBorrowerUnwantedField
Go to opac-memberentry.pl
Notice the JS error
Uncaught TypeError: j is undefined
Apply this patch
Go to opac-memberentry.pl
=> no JS error
Fill the pref with some values
Go to opac-memberentry.pl
=> Confirm that the fields you marked as mandatory as flagged accordinly
on the UI
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The 'completed' flag was causing the wrong status to be shown, but we
can also give a more useful message to the patron.
To test:
1) Enable the UseRecalls system preference and set up your
recalls-related circulation rules.
2) Check out an item to Patron B.
3) Log into the OPAC as Patron A and search for the item.
4) Place a recall on that item.
5) Go back to the staff client and check the item in. Confirm the recall
as waiting for Patron A.
6) Go back to the OPAC record page and look at the holdings table.
Notice the status still says the item is Available.
7) Apply patch, restart services, refresh the OPAC.
8) Confirm the holdings table status now says the item has a pending
recall.
Sponsored-by: Catalyst IT
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The current situation is that biblio-level holds can be assigned an item
type, so they can only be fulfilled by items matching that specified
item type (be it item-level itype or the fallback to biblio-level).
But there's the situation in which max holds limits for a specific item
type can be overridden by using biblio-level holds with item type
selection (AllowHoldItemTypeSelection) enabled.
To test:
1. Have a patron of category 'Staff' (S)
2. Have 3 records with items with the 'BK' item type, and maybe others
3. Enable AllowHoldItemTypeSelection
4. Set a limit of 2 max holds for that category+item type
5. In the OPAC. Place bibio-level holds, with item type contraint to 'BK' on those 3 records
=> FAIL: You can place the 3 holds
6. Cancel the holds
7. Apply this patch and restart all
8. Repeat 5
=> SUCCESS: You can only place 2 holds
9. Run:
$ kshell t/db_dependent/Reserves.t
=> SUCCESS: Tests pass!
10. Sign off :-D
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Improve age restriction message.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
There were several templates where we were still using the term
"reserve" instead of "hold." This patch corrects the ones I found,
including in a couple of HTML comments.
To test, apply the patch and confirm that the changes look correct and
affect only the relevant term.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch corrects the word "PLease" to "Please." The patch also adds
some periods at the end of some alert strings to make punctuation
consistent between different alerts.
To test, an inspection of the patch is probably enough. The main fix
(the "PLease") only appears when an unknown error occurs.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When showing an authority, there is a link to search biblio records it is used in.
Actually this link uses 'q=an=$auth_id', this is wrong for an URL, and other places use 'idx:value'.
It does not break search with Zebra nor Elasticsearch but it is better to use ':'
Test plan :
Check changed links return same results with and without patch
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds an additional system preference check to the part of the
OPAC bibliographic detail template which conditionally loads Babelthèque
JavaScript. The script tag should not be output if there is no
Babeltheque_url_js setting to use.
To test, apply the patch and search for "Babeltheque" in system
preferences.
- Set "Babeltheque" to "Do" include information.
- Enter a path in the "Babeltheque_url_js" preference, e.g.
"https://www.example.com/example.js" It doesn't have to be a valid
Babeltheque URL.
- In the OPAC, view the bibliographic detail page for any title. If you
used a dummy URL for the js preference you should see an error in the
console about the file not being found. This confirms that the
template logic is working. If you used a working Babeltheque URL then
the corresponding content should load.
- Return to system preferences and remove the URL from the
"Babeltheque_url_js" preference.
- Return to the bibliographic detail page in the OPAC and confirm that
there is no warning in the console about "'src' attribute of <script>
element is empty."
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch fixes the calendar.inc includes in both staff and OPAC in
order to remove a typo: An extra space in the check for the "dateformat"
system preference.
The result of this error is that changes to the dateformat system
preference will not be correctly applied to Koha without a restart.
To reproduce the problem start the process of creating a new patron.
- In the date of birth field, select a date. The format of the date
inserted should match your current dateformat system preference.
- Go to Administration -> System preferences and update dateformat to
something different.
- Go back to the patron creation form (refresh it if necessary).
- The hint under the Date of birth field will match your updated system
preference, but when you pick a date using the calendar widget it
will still be formatted according to the old value of dateformat.
To test the fix, apply the patch and run through the same steps above.
A change the dateformat preference should be immediately reflected in
the functionality of the calendar widget.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch corrects the path of an image specified as the background to
a couple of elements in the OPAC. The incorrect path was causing 404
errors.
To test, apply the patch and rebuild the OPAC CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- If necessary, activate one or more cover image services in
Administration, e.g. OPACAmazonCoverImages, OPACLocalCoverImages,
and/or OpenLibraryCovers.
- In the OPAC, locate a bibliographic record which has a cover image
from one or more of the services you activated.
- On the detail page for that record, the cover should load correctly.
- In the browser console you should see no errors related to a file not
found: /opac-tmpl/bootstrap/img/spinner-small.gif
- In the browser console, submit this JavaScript snippet:
$(".cover-image").remove();
The cover image should disappear, revealing the "spinner" icon behind
it.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch wraps the List RSS icon in a check on whether the list is
public. Private lists RSS can only be accessed by a logged-in patron.
To test apply the patch and view a public list in the OPAC. You should
see an RSS link icon next to the list title.
Now log in to the OPAC and view a private list. There should be no RSS
link.
Note the QA tool warning about the aria-hidden attribute is a false
positive. The parent element has a label.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch corrects the is_valid_date function in the OPAC and staff
interface so that it work correctly with Flatpickr.
To test, apply the patch and clear your browser cache if necessary.
- In the staff client, locate a bibliographic record and edit its items.
- Test that the "Date acquired" date picker works correctly and that
there are no errors in the browser console.
- Test other date input fields to check that they still work, e.g.
specify due date during checkout; Catalog statistics wizard; Patron
entry/modification, etc.
- Perform similar tests in the OPAC: Hold suspension; Update your
personal details.
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds a new page opac-reset-password where a user cna enter their login
(userid or carndumber), current password, and new password.
If the user has a password expiration date and the current password is correct and
the new passwords match and meet requirements their password will be updated and the
expiration date reset
A patron whose password does not expire will be reidrected to login to change their password
To test:
1 - Apply patch, updatedatabase, enable new syspref EnableExpiredPasswordReset
2 - Set 'Password expiration' for a patron category
Home->Administration->Patron categories->Edit
3 - Create a new patron in this category with a userid/password set, and an email
4 - Update the patron with an expiration to be expired
UPDATE borrowers SET password_expiration='2022-01-01' WHERE borrowernumber=51;
5 - Give the borrower catalogue permission
6 - Attempt to log in to Straff interface
7 - Confirm you are signed out and notified that password must be reset
8 - Click 'Reset your password' link
9 - You should see the reset password page with fields for: login, current password, new password, conmfirm password
10 - enter invalid/incomplete credentials
11 - Confirm you are notified of invlaid credentials
12 - Fill in all fields, but enter current password as new password
13 - Confirm you are notified of no change
14 - Set minimum password length / strong password requirement for category
15 - Confirm you receive error if new password too short or not secure
16 - Enter a valid new password and submit and confirm update is successful
17 - Confirm you have buttons to go to OPAC or Staff and that both work
18 - Confirm you cna log in (i.e. expiration has been reset)
19 - Expire the users password
20 - Remove catalogue permission
21 - Reset password again and confirm only OPAC link
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
If the passed credentials are wrong, we shouldn't expose things like the
password is expired.
This patch takes care of that.
To test:
1. Have a known patron with password_expiration_date set so its
password is expired. Can be done like:
$ koha-mysql kohadev
> UPDATE borrowers \
SET password_expiration_date='2022-04-25' \
WHERE borrowernumber=132;
Note: change the borrowernumber
2. Attempt to login to the OPAC with wrong credentials
=> SUCCESS: You are rejected, with a message telling credentials are
wrong
=> FAIL: You are told the password is expired.
3. Apply this patch and restart Plack
4. Repeat 2
=> SUCCESS: You are rejected, credentials are wrong and no mention to
password being expired.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
