As requested by RM, this patch replaces using the global $cached_indicators
by saving state temporarily during the (limited) lifetime of the object.
Essentially this affects two places in code:
[1] blinddetail-biblio-search.pl (loading auth record in editor)
[2] AuthoritiesMarc::merge (merging authority into biblios)
Concurrent runs of [1] and/or [2] together with a simultaneous pref change
just in between could cause slight (hypothetical) side-effects.
The current approach of keeping state in the object makes that a series of
controlled_indicators calls during an immediate merge of one specific
authority is not affected by a simultaneous pref change. So the same rules
are applied to the set of attached biblio record for that authority.
Note also that the cron job ignores a simultaneous pref change, since
it reads from the unchanged L1 cache (yes, also hypothetical).
Test plan:
[1] Run t/Koha/Authority/ControlledIndicators.t
[2] Run t/db_dependent/Authority/Merge.t
[3] Run t/db_dependent/Koha/Authorities.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If the indicators are not controlled, blinddetail should not overwrite
what the user already entered. Very strictly seen, we could say that it
is outside the scope. But it is strongly related.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested with 100 and 600 in the cataloging editor.
For 100 the second indicator should not be overwritten. For 600 it should.
Also tested "ind2:" which should blank ind2.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
In sub merge the Koha::Authority object was already created, so it was kind
of silly to recreate it each time with new.
In Koha::Authority, the ControlledIndicators object can be saved in the
object too for reuse during its life time. Similarly, we prevent repeated
lookups for the reporting tag (via authority type).
Test plan:
[1] Run t/db_dependent/Authority/Merge.t
[2] Run t/db_dependent/Koha/Authorities.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Limited benchmarking shows me a reduction of 11% on Merge.t and a
reduction of 4% on Authorities.t when comparing with and without this
last patch. The larger impact on Merge.t could be expected.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch does:
[1] Adds Koha::Authority->controlled_indicators (with a test).
[2] Adds a call to controlled_indicators in AuthoritiesMarc::merge.
Unit test Merge.t is extended too.
[3] Simplifies the code in authorities/blinddetail-biblio-search.pl by
calling controlled_indicators.
Test plan:
[1] Run t/db_dependent/Koha/Authorities.t
[2] Run t/db_dependent/Authority/Merge.t
[3] Steps 3 to 7 for MARC21:
Create a PERSO_NAME authority with 008/11=r and ind1=3
[4] Edit a biblio and add a 600 linked to the new authority.
[5] Verify that the biblio has ind1==3 and ind2==7 and $2==aat.
(If $2 is not visible, check the metadata in biblio_metadata.)
[6] Edit the PERSO_NAME authority and change 008/11 to '|' (bar).
[7] Verify that merge updated your biblio record: $ind2==4 and $2 gone.
[8] UNIMARC: Follow the pattern from steps 3 to 7.
Create authority, link it in a biblio, check indicators (they should
be copied both). Edit authority, change indicators and verify the
merge results in the biblio record.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested PERSO_NAME and UNIF_TITLE.
For UNIF_TITLE the second authority indicator is copied to ind1 or ind2,
depending on the biblio tag involved.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Including:
[1] Atomic update to add pref for existing installs
[2] Add new pref to sysprefs.sql for new installs
[3] Add description to authorities preference file.
Test plan:
[1] Run new install or upgrade to add pref.
[2] Check value of pref via System preferences in staff interface.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Apart from adding tests for this sub, we make the following change
too and support it with a test.
The fallback to $code in the construction
$thes_mapping{ $code } // $code // '4'
is removed by this patch. When $code is not in $thes_mapping, we cannot
assume that it is a valid code for a biblio indicator. In this case it is
more safe to mark it as 4 (Source not specified).
Test plan:
Run t/Koha/Authority/ControlledIndicators.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Original patch from Janusz Kaczmarek on November 24, 2017.
Amended by Marcel de Rooy on February 6, 2018.
Code moved from AuthoritiesMarc.pm to ControlledIndicators.pm.
Special attention has been paid to the proper application of 008/11
while controlling 6XX in MARC 21, specially if 008/11 =~ /[rsz]/
(and if it is 'z' and 040 $f is defined).
Test plan:
See next patch.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
The construction $thes_mapping{ $code } // $code // '4' will still get
some attention on a follow-up.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This module reads its settings from pref AuthorityControlledIndicators.
The get method allows you to retrieve indicator values for specific
biblio fields.
Test plan:
Run t/Koha/Authority/ControlledIndicators.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended: Added a test to show that "ind1:" returns empty string.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Changes in MarcTagStructure.pm
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
prove t/db_dependent/Biblio.t
should be green
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the possibility to define default indicators in
the MARC frameworks. It adds 2 columns in the marc_tag_structure table in
the database in order to accomplish this. All files that reference this
table have also been updated to reflect these added fields.
Test: Add or edit a MARC framework. In the Field list should be 2 extra
columns. It should be possible to add default indicators (1 character)
in these fields. Nothing else should have changed in the meantime.
The default indicator values are not yet visible in the cataloguing module.
The default values are also loaded in the cataloguing form.
Test: Define default values in some MARC framework. Go to cataloguing
and create a new record using this framework. Verify that the defined
defaults are visible when set. Verify the default is empty (as before)
if no default was set. Verify that if the default is changed, the
record is saved with the manually changed value. Verify that upon
changing such a new record, the manually set indicator value is used
and not the default one from the framework.
Don't forget to run database and database schema update
Signed-off-by: Eugene Jose Espinoza <eugenegf@yahoo.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Found this regression when working on other patches:
If you edit a patron and blank the userid field, it will be regenerated
with an incremented value (firstname.surname will be firstname.surname1)
This is because we use a non-existing patron and ->in_storage in
has_valid_userid is always false.
The trick here is to backup the value, generate the userid, then reset
userid to the previous value.
As the POD says, it will be fix later, when AddMember and ModMember will
be replaced with Koha::Patron->store
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
C4::Members did not "use warnings;"
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
Same test plan as previous patch:
add/update/import patrons and watch the userid
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
And prove that we are not cheating
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It is no longer in user, we can remove it.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We previously prove that the method and the subroutine were equivalent,
we know update the controller calls.
Test plan:
- Add and update a patron with different variations of userid
(automatically generated or not)
- Import patrons with and without userid, as well as with existing
userid
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Reuse how C4::Members::Check_Userid works and adapt it to write
Koha::Patron->check_userid
Adapt the tests to use this new method.
The tests still pass, we can adapt the different callers
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch moves the tests related to Check_userid out of Members.t
The tests must pass with only this patch applied
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
See comments on Bugzilla report and wiki roles page for 18.05.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
First moved all relevant 17.11 release team entries to the development
section, and then updated the release team section from the wiki 18.05
roles page.
Test plan:
[1] Check if Koha team tab on about looks as it should.
[2] Verify changes with 17.11 and 18.05 roles.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Changes for other frameworks
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This is quite dirty but rewrite the JS checks is out of the scope of
this bug report.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The ACQ MARC framework is only used for the ‘Item’ block.
This patch add the ability to define biblio fields (!= 995 or 952) to
customize the display of the bibliographic details when ordering.
This new feature is controlled by a new pref:
UseACQFrameworkForBiblioRecords
Test plan:
- Create a new installation to populate the ACQ framework correctly
- Set the pref UseACQFrameworkForBiblioRecords to "Use"
- Create a new order
=> You will see the lib from the ACQ framework
- Add/remove/update biblio subfields in the ACQ framework
- Create a new order
=> You should see the new subfields displayed
Note for QA: I though I would be able to refactor existing code to make
it more flexible, but it is a bit messy and lost a lot of time. I
finally decided to copy/paste the existing code. I simplified it as, I
think, we do not want the plugin, etc. like in the full biblio editor.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When ordering, the bibliographic details contain the title, author,
publisher code, publication year, isbn and series info.
To avoid regression to provide the same behaviour, we will add these
fields to the ACQ framework
NOTE: This patch makes the change only for
- en
- fr / unimarc complet
Other frameworks will be updated before to be pushed, to avoid
unecessary rebases
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This bug has been found during testing bug 19289.
In some conditions C4::Biblio::TransformHtmlToXml will generate a malformed XML structure. The last </datafield> can be duplicated.
For instance, if a call like:
my $xml = TransformHtmlToXml( \@tags, \@subfields, \@field_values );
with the last value of @field_values is empty, it will return:
<?xml version="1.0" encoding="UTF-8"?>
<collection
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.loc.gov/MARC21/slimhttp://www.loc.gov/standards/marcxml/schema/MARC21slim.xsd"
xmlns="http://www.loc.gov/MARC21/slim">
<record>
<datafield2 tag="020" ind1=" " ind2=" ">
<subfield code="a">l</subfield>
</datafield>
<datafield1 tag="100" ind1=" " ind2=" ">
<subfield code="a">k</subfield>
</datafield>
<datafield1 tag="245" ind1=" " ind2=" ">
<subfield code="a">k</subfield>
</datafield>
<datafield1 tag="250" ind1=" " ind2=" ">
<subfield code="a">k</subfield>
</datafield>
<datafield1 tag="260" ind1=" " ind2=" ">
<subfield code="b">k</subfield>
<subfield code="c">k</subfield>
</datafield>
</datafield>
</record>
</collection>
Which will result later in the following error:
:23: parser error : Opening and ending tag mismatch: record line 6 and datafield
</datafield>
^
:24: parser error : Opening and ending tag mismatch: collection line 2 and record
</record>
^
:25: parser error : Extra content at the end of the document
</collection>
Test plan:
You can test it along with bug 19289 and confirm that it fixes the problem
raised on bug 19289 comment 30
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
No need to check the pref.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Many services use SIP patron req info to validate a patron against
the koha database. If recording lastseen sites will
also want to record that the user has accessed these
library facilities although they have not logged into koha
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Verified that Patron Info request (63) updates lastseen when the pref has
been enabled.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch not only updates the version check, but repurposes
the perlversion parameter, so as to not have to retranslate
templates again when the version number changes after this.
The changes are very self-evident.
Signed-off-by: Roch D'Amour <roch.damour@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
* koha/opac-illrequest.pl - Added explicit setting of authnotrequired
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The tags for home library and holding library in the 'refine your
search' list should be h5.
This patch changes the html tag for the availability, holding library and home library
facets.
To test:
- Search for an item in the OPAC where the relevant facet appears
- Use 'Inspect element' to check the tag
- Apply patch
- Confirm the facet now has the h5 tag
- Confirm spacing is improved
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1 - View sysprefs
2 - Note 'Labs' tab
3 - Note EnableAdvancedCatalogingEditor is the only pref there
4 - Note that prefs works
5 - Apply patch
6 - Note 'Labs' tba is gone
7 - Check the 'Cataloging' tab (under Interface)
8 - There it is!
9 - Verify it still works
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Maksim Sen <maksim.sen@inlibro.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch modifies the patron detail page so that the "Messages" header
is not displayed if there are no messages.
Unrelated: A minor change was made to moremember.pl to quiet an error in
the log, "Use of uninitialized value $print in string eq at
members/moremember.pl line 219."
To test, apply the patch and open the detail page for a patron who has
no messages. There should be no "Messages" header or "add message" link.
Add a message to the patron's account. The message should appear, along
with the "Messages" header and "add message" link.
The error logs should show no errors.
Signed-off-by: Maksim Sen <maksim.sen@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch combines report paramters with the same name and data type
(authorised value)
This presereves the past ability to provide all parameters as
'sql_params' in order to preserve existing public report links
To test:
1 - Create a report that takes multiple parameters, e.g.:
SELECT <<cat>> AS one, <<dog|branches>> AS two, <<dog|YES_NO>> as three,
<<cat>> as four, <<dog|branches>> as five
2 - Run this report, note you are asked for five parameters
3 - Apply patch
4 - Update database
5 - Run report, note you are asked for three params
6 - Verify the results reflect the supplied parameters
7 - Export the report and verify results
8 - Alter the URL and provide 5 params as sql_params and no param_name
variables i.e.
http://localhost:8081/cgi-bin/koha/reports/guided_reports.pl?reports=1&phase=Run+this+report&sql_params=Banana&sql_params=CPL&sql_params=0&sql_params=Orange&sql_params=LPL
9 - Verify results come out as expected. i.e. 5 different values that
are those of the URL.
Signed-off-by: Victor Grousset <victor.grousset@biblibre.com>
Signed-off-by: Charles Farmer <charles.farmer@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds current date and time, formatted as configured.
It makes the timezone name be displayed the system uses it (important
for the 'local' use case).
It removes some warnings too.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds C4::Context->timezone bad timezone handling.
The calculated 'effective' timezone is tested with the right tool and a
fallback to 'local' is added. A warning is printed in the logs.
A test for this is added to about.pl too, along with the right warning
messages in case of problems.
Tests are added for both invalid TZ and to make sure the warning is
raised.
To test:
- Apply the patch
- Run:
$ kshell
k$ prove t/timezones.t
=> SUCCESS: All tests pass
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It should also be noted that
/etc/apache2/sites-enabled/{configuration file}
should also contain:
RequestHeader add X-Koha-SetEnv "TZ {timezone}"
Where {timezone} is the desired instance timezone.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
