Make captcha visible even if password field is hidden
Remove password confirmation field before submitting modification
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
1) "Contact information" should be "Password"
2) Don't pass sysprefs from the script to the template, use Koha.Preference()
3) minPasswordLength is optional, we cannot always assume it is set
4) Password field when does not follow convention completely when mandatory
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch allows patrons to create thier own password during OPAC self
registration. It sets the password field to be hidden by default, and
allows for a system generated password if no password is supplied and
field is not mandatory
1 - Apply patch
2 - run updatedatabase.pl
3 - Check syspref "PatronSelfRegistrationBorrowerUnwantedField" - it
should contain 'password'
4 - Check self registration on opac - there should be no change
5 - Remove 'password' from PatronSelfRegistrationBorrowerUnwantedField
6 - Password field should now be visible in OPAC self registration
7 - Register a patron: If no passwor is supplied you should get a system
generated password
8 - Register a patron with a password, your password should be used
9 - Add 'password' to PatronSelfRegistrationBorrowerMnadatoryField
10 - Attempt to register a patron with no password - it should fail
11 - Try all combinations if mismatched/short/missing passwords and view
correct error messages
12 - prove t/db_dependent/Members.t
Sponsored by : Do Space (www.dospace.org)
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
* Changed wording to not be github-centric
* Added suggested links
* Switched to more traditional logo
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Add column visibility menu using DataTables Buttons
Add a text filter on top of each column
Also extend page width so that the large table is better centered
Depends on bug 15285
Test plan
1. Go to Holds queue page (circ/view_holdsqueue.pl)
2. Check that table sorting and filtering work well and that you can
hide each column
3. Go to Admin > Configure columns and change the settings for this
table (Circulation > view_holdsqueue > holds-table). Verify that the
settings work by going again to the Holds queue page
4. Check that filters continue to work after hiding some columns
Tested on top of 15285, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
* Use ->id instead of ->branchcode when possible to eliminate use of that nomenclature
* Fix bad use of ->branchcode to ->{branchcode} for unblessed hashref version of Koha::Library
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
C4::Branch::GetBranchInfo was only used once in opac/opac-suggestions.pl
The occurrence can easily be replaced by a call to Koha::Libraries->find
Test plan:
1/ Create a suggestion for library A
2/ Enable OPACViewOthersSuggestions
3/ Use a patron from library B to see the suggestions
4/ The "Suggested for" value should be correctly filled with the library
A name.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This subroutine was only used in tests to add/update a library.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
C4::Branch::GetBranchDetail retrieved library infos, it could be easily
replaced with Koha::Libraries->find
When this change needs other big changes, the unblessed method is
called, to manipulate a hashref (as before) instead of a Koha::Library
object (for instance when $library is sent to GetPreparedLetter).
Test plan:
1/ Print a basket group, the library names should be correctly
displayed.
2/ Enable emailLibrarianWhenHoldIsPlaced and place a hold, a HOLDPLACED
notice will be generated (focus on the library name)
3/ Edit a patron and change his/her library
4/ Generate the advanced notices (misc/cronjobs/advance_notices.pl) and
have a look at the generated notices
5/ Same of overdues notices
6/ Set IndependentBranches and use a non superlibrarian user to place a
hold. The "pickup at" should be correctly filled.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
C4::Branch::GetBranchesInCategory is not used anymore and can be
removed.
Test plan:
git grep GetBranchesInCategory
should not return any result.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
C4::Branch::GetBranchesInCategory can be replaced with
Koha::LibraryCategory->libraries
Test plan:
1/ Define some 1+ group of libraries with 1+ libraries each
2/ Go on the advanced search (OPAC and Staff) and select a group of
libraries
3/ The result should be consistent and only include record from these
libraries
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
For consistency, the branchcodes method of Koha::LibraryCategory should be
named libraries.
At the moment, there is only one occurrence, in admin/branches.pl
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
C4::Members::getidcity and C4::Members::GetCities simply retrieved
cities info from the cities table.
The job done in members/memberentry.pl looked really weird and complicated.
Either I have missed something, or this patch can simplify it.
The expected behavior is:
1. Create a new patron => No city selected
2. Edit an existing patron => The borrowers.city value is selected
3. Add a guarantee => The borrowers.city of the guarantor is selected
4. Edit a guarantee => The borrowers.city of the guarantee is selected
Test plan:
Confirm that the expected behaviors are the ones before and after this patch.
Signed-off-by: Natasha <tasham_8@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
C4::Members::getzipnamecity was not used and can be remove safely.
Test plan:
git grep getzipnamecity
should not return any result.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
To test:
Go to Circulation and ensure there are no titles on hover over the links
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
To test:
1) Go to Tools -> Label Creator -> New label batch
2) Add an item
3) Click 'Remove selected items' button. Confirm message now reads "Please select at least one label to delete."
4) Click 'Remove duplicates' button. Confirm message now reads "Duplicate item(s) removed from batch number X: Y", all in bold.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Rewording Ok for translatability purpose
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
UPDATE: Making error messages the same
To test:
1) Go to Admin -> MARC frameworks
2) Click Import next to any framework. You won't actually be overwriting or importing anything as this is only a string fix, so it can be an existing framework
3) Click the Import button without attaching any file. Confirm it says "Please select a spreadsheet (.csv, .ods, .xml) file." and that this makes sense to you
4) Attempt to attach a file that is not a .csv, .ods or .xml file. You should instantly get an error message saying "Please select a CSV (.csv), ODS (.ods) or XML (.xml) file." Confirm this shows up and makes sense to you
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Rewording Ok. Works as described
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
When viewing the checkout history for a title the branchcode is
displayed. This patch alters the template to show the library name
instead.
To test, apply the patch and locate a title in the staff client which
has been checked out at least once. From the detail page, click
"Checkout history" in the sidebar. The "Checked out from" column of the
checkout history table should show the library name instead of the
branchcode.
Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Somehow, it may happen that Zebra keeps writing to the old rotated logfile
with extension .log.1. I must add that although I saw that happen (a new
log was created and was empty, while Zebra kept writing to log.1 for weeks),
I cannot reproduce it every time.
By stopping the zebra server in prerotate and starting it again in
postrotate, this should not happen at all. In practice, this implies that
your Zebra server is restarted once a week.
Note: The existing sharedscripts directive makes sure that these actions
are not executed for all individual logfiles but once for all matching
logfiles (even when running multiple instances).
Test plan:
[1] Apply the change in koha-common.logrotate to the file
/etc/logrotate.d/koha-common.
[2] Run logrotate -f /etc/logrotate.conf (forcing a logrotate).
[3] Check in zebra-error.log that your zebra server was stopped
('killed by signal 15').
[4] Verify that your Zebra server runs (read: has been restarted).
(Do a search..)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch adds a commented zebra_loglevels line to the config file.
Behavior does not change, but an admin can easily edit the variable.
Test plan:
Nothing really changed. But if you are not so sure about that, apply the
change to /etc/koha/koha-conf-site.xml.in and run koha-create. Check
that the new koha-conf contains the line and is not messed up.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The file zebra.log is actually not used, because daemon's --output
parameter sends all message to zebra-output (making that stdout
goes there too and --stdout does nothing). We do not need any
differentiation (if any at all) here; behavior does not change.
Note: zebra-error will only contain the daemon's error messages and not
the zebra error messages! So you will probably only find messages about
stopping zebra in zebra-error.
The loglevels are by default none,fatal,warn and can be changed via the
zebra_loglevels config variable (read by koha-functions.sh). If you remove
'none', you will have request-messages in the log. You can also keep 'none'
and add 'request' to achieve something similar (undocumented however).
Some of the parameters passed to daemon when stopping zebra are
superfluous and have been removed.
Test plan:
[1] Remove the file zebra.log. Look at last lines in zebra-error and
zebra-output.
[2] Remove zebra_loglevels from koha-conf (if present).
Start/restart Zebra. Search to verify if Zebra runs.
Stop Zebra and check zebra-error for a new line (killed by signal 15).
[3] Add fatal,warn in koha-conf:zebra_loglevels (do not include 'none').
Start Zebra. Check zebra-output for a line "[log] zebra_start".
Do a search and check zebra-output for lines with "[request]".
[4] Verify that zebra.log did not appear again.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Preparing for including different log levels in koha-start-zebra.
Note that the default response is none,fatal,warn; this is equal
to the options passed to zebrasrv in koha-start-zebra (for now).
Test plan:
[1] Run on the command line: source koha-functions.sh
[2] Type get_loglevels [your_instance]
By default, you should see: none,fatal,warn
[3] Add this line to your koha-conf:
<zebra_loglevels>how,are,you</zebra_loglevels>
[4] Run get_loglevels [your_instance] again.
Remove the nonsense log levels again..
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This subroutine has been added by
commit 42acfbf75b
Bug 7993: Save reports with Group/Subgroup hierarchy
But it has never been used (or git grep cheats me).
Test plan:
1/ git grep build_authorised_value_list
should not return any result
2/ Create a report, execute it
Everything should work fine.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This subroutine does not make sense anymore (Koha::DateUtils should be
used) and is no longer used.
It can be removed safely.
Test plan:
git grep slashifyDate
should not return any results
prove t/Koha.t
and
prove t/db_dependent/Koha.t
should return green
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
slashifyDate removed, all test pass successfully
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Test plan:
prove t/db_dependent/Koha.t
should return green
git grep AddAuthorisedValue
should not return any results
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The C4::Koha::AddAuthorisedValue is only called twice from
reports/guided_reports.pl and insert an authorised value.
This job can be achieve easily using the Koha::AuthorisedValue module.
Test plan:
1/ Create a new guided report
2/ Use an existing group and/or subgroup of reports
3/ Save
4/ Update an existing report
5/ Use an existing group and/or subgroup of reports
6/ Save
7/ Create or update an existing report
8/ Remove its assigned group and subgroup
9/ Save
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This subroutine is no longer in use.
Test plan:
git grep get_itemtypeinfos_of
should not return any results.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Trivial and needed removal.
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This subroutine is no longer in used and can be remove.
Test plan:
git grep GetKohaImageurlFromAuthorisedValues
should not return any results.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
(was: Bug 14658: (followup) fix issue with list context on DBIC call)
While working on bug 14659, it was discovered that the call to
...->guarantor in list context will cause the hash to be misaligned if
there is no guarantor.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
I only found one confirmation dialog, all the others use javascript.
To test:
Go to Tools -> Notices and Slips
Click Delete on a notice
Confirm Yes and No options still work as expected
Check Tools module in case I missed any confirm dialogs
Sponsored-by: Catalyst IT
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
To test:
1) Go to Tools -> Overdue notice/status triggers
2) Click Save changes (you don't have to change anything)
3) Confirm message now says 'Changes saved.' which is much nicer
Sponsored-by: Catalyst IT
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Otherwise the label is red and a bit agressive :)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The styling of the patron image upload form causes the text to be
smaller than it should be for the main body of a page. This patch
revises the form style and cleans up the markup a bit.
This patch also adds client-side validation of the form so that a file
upload is required, and a card number is required if an image file is
selected.
To test, apply the patch and go to Tools -> Upload patron images.
1. Confirm that the text in the form is the correct size.
2. With "Zip file" selected, confirm that submitting the form is blocked
and the file upload marked as required.
3. With "Image file" selected, confirm that submitting the form
with an empty card number field is blocked and the card number
field is marked as required.
4. Confirm that uploading zip files and single images still works
correctly.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
To test:
1) Notice Rotating Collections is under Patrons & Circ on tools-home.pl
2) Apply patch and refresh page
3) Notice it is now under Catalog and is in the same position it is in on the tools sidebar menu
Sponsored-by: Catalyst IT
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
To test:
1) Go to Tools -> Rotating Collections
2) Confirm actions (Add or remove items, Transfer, Edit, Delete) have moved into a drop down menu
3) Confirm all of the actions work as expected
Sponsored-by: Catalyst IT
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
A warning is raised when order amount exceed budget or fund this dialog needs to be styled with Font Awesome icons.
To test:
-Add orders to a basket
-Exceed a fund or budget
-Notice about the dialog alert
-Apply patch
-Exceed again and see the new icons
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch moves the following options into a "Settings" menu inspired
by the one in the advanced editor:
- Switch to advanced editor
- Show MARC tag documentation links
- Show tags
- Change framework
To test, apply the patch and open a new or existing record in the
standard MARC editor.
- Test that the 'Switch to advanced editor' button option works.
- Test that the 'Show MARC tag documenation links' option works (and
that your choice persists across sessions).
- Test that the initial settings for 'Show tags' respects the
'hide_marc' system preference.
- Test that the 'Show tags' option works (and that your choice persists
across sessions).
- Test that framework switching works correctly and that the menu
correctly reflects your choice.
- Confirm that other toolbar functions work as expected, both in regular
editing mode and Fast Cataloging.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as expected.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Test Plan:
1) Apply this patch
2) Go to circulation.pl
3) Ensure you can still override renewal limits with pref enabled
4) Ensure you can not override renewal limits with pref disabled
5) Go to moremember.pl
6) Repeat steps 3-4
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Fixed AllowPkiAuth issue caused by 15101.
Added missing AudioAlerts
TEST PLAN
---------
1) prove -v t/db_dependent/UsageStats.t
-- should pass after applying patch
2) Run koha qa test tools
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The first four patches do not create any noise under Ubuntu 14.04 LTS.
Running on Debian Jessie:
[SNIP]
keys on reference is experimental at t/db_dependent/UsageStats.t line 88.
keys on reference is experimental at t/db_dependent/UsageStats.t line 106.
keys on reference is experimental at t/db_dependent/UsageStats.t line 119.
keys on reference is experimental at t/db_dependent/UsageStats.t line 136.
keys on reference is experimental at t/db_dependent/UsageStats.t line 153.
keys on reference is experimental at t/db_dependent/UsageStats.t line 162.
keys on reference is experimental at t/db_dependent/UsageStats.t line 587.
[SNIP]
Instead of having 'keys $foo->{bar}', 'keys %{$foo->{bar}}' was used.
TEST PLAN
---------
1) On a DEBIAN system (Jessie gives above messages)
apply the first 4 patches interactively.
2) $ prove t/db_dependent/UsageStats.t
-- trigger noise like above.
3) apply this patch
4) $ prove t/db_dependent/UsageStats.t
-- no noise triggered.
5) koha qa test tools
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The rollback issue came from '_count' testing.
It used a 'DROP TABLE' and 'CREATE TABLE' which implicitly do autocommit.
That's why the final rollback could not be.
This patch no longer uses t::lib::TestBuilder either because it was the cause
of the warning on Comment #1 :
"DBIx::Class::Storage::txn_rollback(): A txn_rollback
in nested transaction is ineffective! (depth 1) at
t/lib/TestBuilder.pm line 308"
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Now data is preserved, no errors.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
It's saving a large number of lines
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
All tests run, no koha-qa errors
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
If we delete all biblio DB, we could have some troubles with foreign keys
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
