Since AddAuthority uses max(id)+1 logic to produce the next authid,
authority id's will be reused when you delete the last record. This may
be a source of problems and will be addressed on the next patch.
This patch add a test to expose the problem.
Test plan:
[1] Run t/db_dependent/AuthoritiesMarc.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Modern::Perl, Koha::Database, etc.
Test plan:
Run t/db_dependent/AuthoritiesMarc.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Currently it is possible to spceify both --biblios and --authorities
as command line switches to bulkmarcimport.pl. This does not make sense
so we should exit early and explain that these switches are mutually
exclusive.
To test:
- Run one of these and check that there is no complaint about missing
options:
perl misc/migration_tools/bulkmarcimport.pl -a -b
sudo koha-shell -c "perl misc/migration_tools/bulkmarcimport.pl -a -b"
kohadev
- Observe that this displays the perldoc, but does not complain about
mutually exclusive switches.
- Apply the patch
- Rerun the command(s) from earlier.
- Verify that the script is now halted and a small explanation given.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
to test patch...
1/ set date between 00:00 and 00:59
$ sudo date -s 'Sun Jan 29 00:41:55 NZDT 2017'
2/ run prove, see fail
$ prove -v t/db_dependent/Members/IssueSlip.t
...
t/db_dependent/Members/IssueSlip.t (Wstat: 65280 Tests: 1 Failed: 0)
Result: FAIL
3/ apply patch
4/ run prove, see pass
$ prove -v t/db_dependent/Members/IssueSlip.t
...
All tests successful.
Result: PASS
NOTE: for code obscurity you could have also done a modulus 24. ;)
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Looking at the default framework's fields that are linked to authority
records, there's a divergence with the Zebra index definitions.
This yields to authority usage count be incorrect for users searching
for authority records.
MariaDB [koha_kohadev]> SELECT tagfield,tagsubfield,authtypecode FROM
marc_subfield_structure WHERE authtypecode IS NOT NULL AND
authtypecode<>'' AND frameworkcode='' GROUP BY
tagfield,tagsubfield,authtypecode ;
+----------+-------------+--------------+
| tagfield | tagsubfield | authtypecode |
+----------+-------------+--------------+
| 100 | a | PERSO_NAME |
| 110 | a | CORPO_NAME |
| 111 | a | MEETI_NAME |
| 130 | a | UNIF_TITLE |
| 440 | a | UNIF_TITLE |
| 600 | a | PERSO_NAME |
| 610 | a | CORPO_NAME |
| 611 | a | MEETI_NAME |
| 630 | a | UNIF_TITLE |
| 648 | a | CHRON_TERM |
| 650 | a | TOPIC_TERM |
| 651 | a | GEOGR_NAME |
| 654 | a | TOPIC_TERM |
| 655 | a | GENRE/FORM |
| 656 | a | TOPIC_TERM |
| 657 | a | TOPIC_TERM |
| 658 | a | TOPIC_TERM |
| 662 | a | GEOGR_NAME |
| 690 | a | TOPIC_TERM |
| 691 | a | GEOGR_NAME |
| 696 | a | PERSO_NAME |
| 697 | a | CORPO_NAME |
| 698 | a | MEETI_NAME |
| 699 | a | UNIF_TITLE |
| 700 | a | PERSO_NAME |
| 710 | a | CORPO_NAME |
| 711 | a | MEETI_NAME |
| 730 | a | UNIF_TITLE |
| 796 | a | PERSO_NAME |
| 797 | a | CORPO_NAME |
| 798 | a | MEETI_NAME |
| 799 | a | UNIF_TITLE |
| 800 | a | PERSO_NAME |
| 810 | a | CORPO_NAME |
| 811 | a | MEETI_NAME |
| 830 | a | UNIF_TITLE |
| 896 | a | PERSO_NAME |
| 897 | a | CORPO_NAME |
| 898 | a | MEETI_NAME |
| 899 | a | UNIF_TITLE |
+----------+-------------+--------------+
This patch adds the missing ones to the authority number index as it is
done for the rest of the fields.
To test:
- Verify that
etc/zebradb/marc_defs/marc21/biblios/biblio-koha-indexdefs.xml
contains intries pointing the $9 subfield of all the fields in the
'tagfield' column above, to the Koha-Auth-Number:w index.
- Sign off :-D
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This is a follow-up on the internal server error on 0000-00-00 in the items
column onloan. This patch deals with preventing to have such dates at all
in the date fields of items.
It is accomplished by:
[1] Adding a (private) subroutine _mod_item_dates. It takes an item hash
and replaces date values if needed.
[2] AddItem and ModItem call _koha_new_item resp. koha_modify_item. In these
routines a call to the new _mod_item_dates is inserted.
[3] Although the routine is actually private, I have added some unit tests
to Items.t.
Test plan:
[1] Add a new item. Fill a correct date in dateaccessioned and an invalid
date in Price effective from (=replacementpricedate).
[2] Verify that dateaccessioned is saved correctly and replacementpricedate
is still null (does not contain 0000-00-00).
[3] Edit the item again. Fill some text in dateaccessioned and put a correct
date in replacementpricedate. Verify the results.
[4] Run t/db_dependent/Items.t
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Overview:
Select2 (Bug 13501) introduced divs and inputs that broke some assumptions about the expected HTML structure.
Because of that, expanding fields to show all hidden subfields does not work properly.
Steps to Reproduce:
1. Open some book in the editor or create new (cataloguing/addbiblio.pl)
2. Try to minimize or expand fields, that have among subfields the following:
— Thesaurus driven subfield → subfield with Select2
— Hidden subfield.
Actual Results:
— some fields become hidden, some not, and vice versa
— in the console, you'll see «Uncaught TypeError: Cannot read property 'match' of null»
Expected Results:
— all subfields should minimize/maximize completely
Additional Information:
This happens because Select2 adds some divs, that do not have ID property.
The following patch adds check for the needed attribute existance.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
-Search in OPAC for two or more items
-Note that item types display category codes rather than names
-Make change to file and test in OPAC
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If AcqCreateItem is set to ordering and the basket is marked as
"standing orders", when ordering a JS error is raised:
additem.js:176 Uncaught TypeError: window[events[i]] is not a function
The item block should not be displayed in that case.
Test plan:
- Set AcqCreateItem to "ordering"
- Create a basket and tick the "Standing orders" checkbox
- Add an order to this basket
=> Without this patch you get the JS error
=> With this patch applied you will not get it
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When an item from Library A is reserved and set to be picked up at
Library B, the hold buttons fail to confirm or cancel during check in at
Library B when the item is transferred from Library A.
Test plan:
* Create a hold for item at Library A to be picked up at Library B.
* Check in item at Library A to trigger the transfer.
=> item shows in transit
* Switch to Library B and check in item.
* Confirm the hold.
=> item shows waiting
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
From http://www.template-toolkit.org/docs/manual/Directives.html#section_WHILE
"""
The Template Toolkit uses a failsafe counter to prevent runaway WHILE loops which
would otherwise never terminate. If the loop exceeds 1000 iterations then an undef
exception will be thrown, reporting the error:
WHILE loop terminated (> 1000 iterations)
The $Template::Directive::WHILE_MAX variable controls this behaviour and can be set
to a higher value if necessary.
"""
I do not think we want to increase this value, and I do not think we want to display a
dropdown list with 1000 entries.
This patch replaces the dropdown list with an input text.
Test plan:
- Set circulation conditions - holds per record = 999
- Search for record with items
- Go to the holds tab
- Search for a patron
- Verify that when you send your search, the 'internal server error' is not shown
and you see the input text.
You should be able to enter a value > than 999 and < 1
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Changes made:
- remove obsolete comment in pendingreserves.pl
- use Modern::Perl in circ/pendingreserves.pl
- get rid of unusable param run_report - followup for bug 8454
- get rid of references to hold status - followup for bug 9320
- remove unused data from SQL and reservedata structure
Test plan:
1) Apply patch from bug 18073
2) Apply patch on this bug
3) Enable on shelf hold in administration -> circulation and fines rules
4) Create some holds on avalaible items
5) Confirm that circulation -> holds to pull page works as expected
6) Try to find any regression
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
0) apply the patch
1) enable on shelf hold in administration -> circulation and fines rules
2) create some holds on avalaible items
3) go to administration -> columns settings and confirm there is new holds-to-pull table in circulation section
4) go to circulation -> holds to pull page and confirm that
4a) that the page does work as before
4b) there is ne "Column visibility" button in datatable toolbar
4c) the column configuration does work as expected
4d) there is new column "First patron" with link to patron which is
first in holds queue for given record
4e) sorting works ax expected
4f) filters (in teh bottom of table) work as expected
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Works nicely!
https://bugs.koha-community.org/show_bug.cgi?id=18079
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
If NOT_LOAN is not present, the item search form will raise a JS error:
SyntaxError: expected expression, got '}'
This patch fixes it by handling this specific case.
Note that the "Status" column is still displayed.
Test plan:
Remove your NOT_LOAN authorised values
Go on the item search form
=> You will not get the JS error and the "Status" bloc is no longer
displayed. There is no need to display it if empty.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
==TEST PLAN==
1) Go to an item with a hold and click on the holds tab on the
left
2) Click the red 'X'
3) The hold will be deleted immediately
4) Apply patch
5) Return to an item with a hold and click the 'X'
6) There will now be a confirmation dialog
7) Click cancel and the dialog will disappear and the hold will not be
deleted
8) Click OK and the hold will be deleted
Restored indentations - Mark Tompsett
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch changes current Swagger definitions for patrons and holds to have
data types corresponding to column data types in their database tables.
To test:
1. GET http://yourlibrary/api/v1/patrons/YYY where YYY is existing borrowernumber
2. Observe that numbers / integers are in string data type.
3. Apply this patch
4. Repeat step 1.
5. Observe that numbers / integers are now actually numbers / integers.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Fix tests
prove t/db_dependent/Koha/Patrons.t
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
01 Find a patron
02 Get the updated_on value from the db in borrowers table
03 Delete the patron
04 Get the update_on value from the db on deletedborrowers table
05 Values from 02 and 04 are the same
06 Apply patch
07 Repeat 01-04
08 Values should now be different
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When a loan period is shortened due to using decreaseLoanHighHolds* the time is
always set to the current time in X days, even if the original loan period is
given in days and not in hours.
It should default to 23:59 as is normal for loan periods given in days.
As original due date time defaults to 23:59 when given in days, this patch
modifies the hours and minutes of shortened due date to be equal to original due
date.
To test:
1. prove t/db_dependent/DecreaseLoanHighHolds.t
Signed-off-by: Grace McKenzie <grace.mcky@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
0. Do not apply the patch
1. Edit a biblio record, note you can't edit an indicator (in fact you edit it, but can't see the value)
2. Edit an authority record, note you can't edit an indicator (in fact you edit it, but can't see the value)
3. Apply the patch, you may need clear the browser cache (in Firefox Ctrl+F5 is often enough)
4. Repeat steps 1 and 2 - but now you will be able to edit the indicator
Signed-off-by: J Schmidt <jschmidt@switchinc.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch also fixes a typo ("<<MM><" should be "<<MM>>")
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If in the circ rules matrix you set "On shelf holds allowed" to "If all unavailable",
items with status "Not for loan" are considered available and break the functionality.
Test plan:
- Set "On shelf holds allowed" to "If all unavailable" for your patron and item
category (or everyone and everything)
- Have two items for a record. Check out one
- Set 7 - Not for loan: "Not For Loan" for the second item
- Try to place a hold. Does not work.
- Apply the patch
- Try to place a hold. Should work now.
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch restores access to zebra facets (or zebra::snippet) with YAZ 5.8.1 or higher.
It was failing due to The <retrieval syntax="xml" name="zebra::*" /> entry in
retrieval-info-bib-dom.xml which IndexData said it wasn't even needed to
get that access.
Edit: I amended the commit message (tcohen)
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
I tested on kohadevbox and found no regression or behaviour change. I
will provide a followup for the packages.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
0. Don't apply path
1. Make catalogue search in staff client with more then 20 results,
scroll down to see that pagination is broken
2. Apply the patch
3. Make similar search and confirm, the pagination looks OK with new
style
Signed-off-by: Claire Gravely <claire_gravely@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This typo was introduced in Bug 13726 and has obvious fix
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
SQL expects lists to be comma separated. A trailing comma must also
be avoided.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch fixes internal server error:
Undefined subroutine &C4::Auth_with_ldap::AddMember called at /srv/koha_ffzg/C4/Auth_with_ldap.pm line 213.
It occurs only under plack, and it's strange since C4::Members
does EXPORT AddMember and we are importing it into Auth_with_ldap.pm
(and it does work under CGI).
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
I did not test but trust author and signoffer. The change cannot hurt.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This test will prevent regression on the lost of data when
items.itemcallnumber is linked with a plugin.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This fixes the remaining fields from serials-edit.pl that were seeing their previously entered values
be oblitarated with each new edit. The fields associated to a plugin (dateaccessioned and barcode) were
always displaying <empty> with each new edit, losing the previous effort.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When editing serials subscription, we can edit them but some values are not pulled from the DB correctly to be put in the edit box. If not noticed, the value will be overwritten on the next save.
Test:
- Create a subscription
- Edit itemcallnumber (952o?) and make sure to have a different value than the default one.
- Save.
- Edit it again
- The saved value is not there.
This is true for itemcallnumber and a few other fields.
This was caused by calls to ->field($subfield). This would always fail, of course.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Builds on top of commit:
Bug 17255 - Upgrade Elastic Search code to work with version 2.4+ - rebased wip
-Fix data type 'string' to 'keyword' and 'text'
-index: not_analyzed deprecated, replaced with type: keyword which is equivalent
-store: yes was deprecated, use store: true
TODO: Installer bindings to both the debian package install and the raw developer install.
A taster in Buug 17851
ZE TEST PLAN
0. Remove existing ES and reinstall ES 5.1
apt-get purge elasticsearch
Follow instruction here:
https://www.elastic.co/guide/en/elasticsearch/reference/current/deb.html
1. Reset Elasticsearch index since facets are hard coded to dynamic search_marc_mappings.
1a. perl -e 'use Koha::SearchEngine::Elasticsearch; Koha::SearchEngine::Elasticsearch->reset_elasticsearch_mappings();'
1b. If you get trouble, simply DELETE FROM [search_fields|search_marc_to_fields|search_marc_mapping];
and retry 1a.
1c. Destroy elasticsearch index
curl -XDELETE localhost:9200/koha_biblios
so it can be recreated
2. Recreate the index:
perl misc/search_tools/rebuild_elastic_search.pl
2a. Add something to index if your koha.biblio-table is empty
3. Fetch all indexed records and the facet for subject__facet
curl -XGET localhost:9200/koha_biblios/data/_search?pretty -d '{
"aggregations": {
"my_agg": {
"terms": {
"field": "subject__facet"
}
}
}
}'
4. Run the included tests:
perl t/db_dependent/Koha_Elasticsearch_Indexer.t
perl t/db_dependent/Koha_Elasticsearch.t
perl t/db_dependent/Koha_SearchEngine_Elasticsearch_Search.t
Have fun with your new ES 5.1 cluster!
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
-Changed deprecated facets to aggregations
-Fixed boolean datatypes not allowing analyzers to be specified
-Fixed deprecated '_id' to 'es_id'. Now the ES-index has the correct id==biblionumber
ZE TEST PLAN
1. Reset Zebra index since facets are hard coded to dynamic search_marc_mappings.
2. perl misc/search_tools/rebuild_elastic_search.pl
3. Fetch all indexed records and the facet for subject__facet
curl -XGET localhost:9200/koha_biblios/data/_search?pretty -d '{
"aggregations": {
"my_agg": {
"terms": {
"field": "subject__facet"
}
}
}
}'
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
0) apply the patch
1) try to pay individual fee, with full amount and partial amount
it should work the same as before patch
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
git grep opac_news.new installer
should not return any occurrences in sql files
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The field opac_news.new is very confusing and should be renamed.
If you want to access it via Koha::NewsItem you will have trouble:
use Koha::News;
my $news_item = Koha::News->next;
say $news_item->new;
=> Attempt to bless into a reference at /home/vagrant/kohaclone/Koha/Object.pm line 78.
This patchset is going to rename this DB field to opac_news_content instead.
Since the opac_news.new can be used in notice templates, we need to warn the
user during the update DB process that some templates must be updated.
Test plan:
0/ Apply the first patch "Add a test to highlight the issue" and confirm that
the test fail
1/ Apply this second patch
2/ Execute the DB entry
3/ Confirm that you get a warning if at least one of your notice templates is
using opac_news.new
4/ Confirm that the test new pass
5/ Add/update and delete a news
6/ Confirm that the RSS new feed still works as expected
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
With only this patch applied, proving t/db_dependent/Koha/News.t
will return
"Attempt to bless into a reference at /home/vagrant/kohaclone/Koha/Object.pm line 78."
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
It would be nice if we could control the number of workers and max
requests on a per instance basis, rather than the numbers being
hardcoded in the plack startup script.
Test Plan:
1) Build a new package of Koha with this patch applied ; )
2) Verify koha-plack still works
3) Add the following to the config section of your koha-conf.xml:
<plack_max_requests>75</plack_max_requests>
<plack_workers>4</plack_workers>
4) Stop plack
5) Start plack
6) Verify the number of works and max requests worked!
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Larry Baerveldt <larry@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Rebased against master and added a description for the new configuration
entries
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
