Removes selector code as batch changes cannot have a previous selection.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Some librarians have requested the ability to batch add items to a
course using the same settings for all items.
Test Plan:
1) Apply this patch
2) Create a new course
3) Click the new 'Batch add reserves' button
4) Enter some valid and invalid barcodes in the text box, add some settings
5) Submit the batch, note the results list added items and invalid barcodes
6) Note the valid items were added to the course
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Maksim Sen <maksim.sen@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1) Ensure UseCourseReserves is enabled
2) Go to Course Reserves, create a course
3) When you are taken to the course page, you should notice the
'Argument "" isn't numeric in numeric gt' warn
4) Delete course
5) Notice warn, and that no confirm message popped up
6) Apply patch
7) Create a course again. Confirm the 'Argument "" isn't numeric in
numeric gt' warn did not show
8) Delete the course
9) Notice no warn and the confirm message pops up
Sponsored-by: Catalyst IT
Signed-off-by: Roch D'Amour <roch.damour@inlibro.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1) Ensure UseCourseReserves is enabled
2) Go to Course Reserves and create 3 new courses
3) Add one item to a course, add two items to another course, and add no
items to the third course
4) Delete the course with no items. Confirm the error message shows up.
No need to say how many attached items there are here (because there are
none).
5) Delete the course with one item. Confirm the error message shows and
warns of the one attached item and makes grammatical sense
6) Delete the course with two items. Confirm the error message shows and
shows the correct number of attached items and makes grammatical sense
7) Confirm clicking 'Cancel' and 'OK' does what is expected
Sponsored-by: Catalyst IT
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Looks good!
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Restore display of message when no barcode found
To test:
1 - Go to course reserves
2 - Add an item to a course
3 - Try adding an invalid barcode - should get an alert
4 - Try force adding an item with itemnumber:
http://localhost:8081/cgi-bin/koha/course_reserves/add_items.pl?op=lookpup&course_id=11&itemnumber=1234523546
5 - Should recieve an error
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Values from the items, biblio and biblioitems tables are used in the template,
so we need to pass all of them to the template, but separately.
That way we easily see which field from which table we are displaying.
Test plan:
Create a course reserve and add items.
Correct information must be displayed on the detail page of the course
reserve, on staff and OPAC interface.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Lari Taskula <lari.taskula@jns.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch alters the crouse reserves module to use itemnumber as the
lookup method for existing reserves as opposed to barcode
To test:
1 - Apply patch
2 - Add some items to a course reserves - all should work as expected
3 - Delete the barcode for an item on reserve
4 - Note the edit link still resolves to the correct item
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch replaces the occurrences of
my @foo = $cgi->param('foo');
with
my @foo = $cgi->multi_param('foo');
perl -p -i -e
's/^(\s*my\s*@\w+\s*=\s*)\$(cgi|input|query)\->param\(/$1\$$2\->multi_param\(/xms'
**/*.pl
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
http://bugs.koha-community.org/show_bug.cgi?id=9987
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If one chooses to edit an existing course reserve for an item, saving it
should go back to the course details, but instead displays the "add
items: scan barcode" form.
Test Plan:
1) Edit a course reserve
2) Save it
3) Note you get the "add items: scan barcode" form
4) Apply this patch
5) Repeat steps 1 and 2
6) Note you are now redirected back to the course details page
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since we switched to Template Toolkit we don't need to stick with the
sufix we used for HTML::Template::Pro.
This patch changes the occurences of '.tmpl' in favour of '.tt'.
To test:
- Apply the patch
- Install koha, and verify that every page can be accesed
Regards
To+
P.S. a followup will remove the glue code.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The main patch allows /any/ user with an account on the Koha system
to view the staff-side course-reserves home page -- including ordinary
patrons. This patch repairs the oversight.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
A librarian with no course reserves permissions cannot view course
reserves from the staff intranet, yet can from the OPAC. This doesn't
make much sense. Librarians should not require any course reserves
permissions to view courses and reserves from the staff intranet.
Test Plan:
1) Log into staff intranet as a librarian with no course reserves
permissions
2) Note you cannot view course reserves
3) Apply this patch
4) Note you can now view course reserves
5) Verify you cannot modify courses or course reserves
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Bug 11866 [Follow-up] Staff side course reserves too restrictive
This follow-up patch adds a check for the "UseCourseReserves" system
preference to the display of the Course reserves menu item in the
header.
To test, view the "More" menu with the "UseCourseReserves" system
preference on and off. The menu item should appear and disappear
accordingly.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
New modules should not export any symbols by default
without a very good reason.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Adds a course reserves system for academic libraries.
The course reserves system allows libraries to create courses
and put items on reserves for those courses.
Each item with at least one reserve can have some of its attributes
modified while it is on reserve for at least one active course.
These attributes include item type, collection code, shelving location,
and holding library. If there are no active courses with this item
on reserve, it's attributes will revert to the original attributes
it had before going on reserve.
Test Plan:
1) Create new authorised value categories DEPARTMENT and TERM
2) Create a new course, add instructors to that course.
3) Reserve items for that course, verify item attributes have changed.
4) Disable course, verify item attributes have reverted.
5) Enable course again, verify item attributes again.
6) Delete course, verify item attributes again.
7) Create two new courses, add the same item(s) to both courses.
8) Disable one course, verify item attributes have not reverted.
9) Disable both courses, verify item attributes have reverted.
10) Enable one course, verify item attributes are again set to the
new values.
11) Edit reserve item attributes, verify.
12) Disable all courses, edit reserve item attributes, verify
the item itself still has its original attributes, verify
the reserve item attributes have been updated.
13) Verify the ability to remove instructors from a course.
14) Verify new permissions, top level coursereserves, with
subpermissions add_reserves and delete_reserves.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Corinne Bulac <corinne.hayet@bulac.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
http://bugs.koha-community.org/show_bug.cgi?id=8125
