Test plan:
Verify that you can filter by reset password.
And that the uppercase code is replaced by a description.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch modifies templates for tools under the "Additional tools"
heading so that title tags can be more easily translated. The patch also
makes some modifications to titles, breadcrumb navigation, and page
headers in order to make them more consistent with each other and with
other similar pages.
To test, apply the patch and go to Tools. Test each page below and each
variation of the page to confirm that titles, breadcrumbs, and page
headers look correct.
- Calendar
- CSV profiles
- Main page
- New CSV profile
- Modify CSV profile
- Confirm deletion of CSV profile
- Log viewer
- Search results
- News, HTML customizations, and pages
- Create and modify each content type: news, pages, HTML
customizations
- Task scheduler
- Quote editor
- Main page
- New quote
- Edit quote
- Import quotes
- Uploads
- Main page
- Upload file
- Delete file
- Search for file
- Access files
- OPAC problem reports (with OPACReportProblem enabled)
Signed-off-by: Stina Hallin <stina.hallin@ub.lu.se>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch corrects several more instances where the templates use the
term "biblio" where it should use "bibliographic."
To test, apply the patch and confirm that these instances read
correctly:
- About -> Special thanks... -> Mines Paristech: "bibliographic
frameworks"
- Acquisitions -> Vendor -> Receive shipments: "Record count" in the
table of shipments.
- Catalogue -> Bibliographic record details -> Labeled MARC: "Labeled
MARC record" heading.
- Circulation -> Holds to pull: Error message, "hold has been placed at
the bibliographic record level."
* I'm not sure how one can trigger this error message.
- Tools -> Log viewer -> Filter by "Catalog" and "Add": "Bibliographic
record..." link in the "Object" column.
Signed-off-by: Sam Lau <samalau@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
- Go to Tools > Log viewer
- Uncheck All modules
- Check the 'Catalog' module
- Make sure "To screen in the browser" is the selected output
- Click Submit
After the page loads, instead of the tools side navbar appearing on the left, a 'catalog detail' type navbar (Normal, MARC, ISBD, etc.) is present with links that error out as there's no associated bibnumber.
-Apply patch
-Try again, you should not see the biblio-view-menu
-Try one more time but this time add a valid biblionumber to the Object: field. Now the biblio-view-menu should show with links to that particular bib.
Works as advertised.
Signed-off-by: Alexander Blanchard <alexander.blanchard@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates icons which are listed as having changed names in
this document:
https://fontawesome.com/docs/web/setup/upgrade/upgrade-from-v4
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Added 'ACQUISITION CLAIM' and 'ACQUISITION ORDER' to the log viewer form.
Please test this well (making sure there are log entries of these types and they show properly upon searching for them)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It should ease translatability and remove an extra space.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates several templates in the tools directory so that they
use the new WRAPPER for displaying breadcrumbs.
To test, apply the patch and test each page and its variations.
Breadcrumbs should look correct, and each link should be correct.
- Tools ->
- Tools home page
- Log viewer
- Search result
- Uploads
- Upload results
- Cataloging ->
- Upload local cover image
- Upload result
- Test uploading an biblio-level image from the bibliographic detail
page
- Test uploading an item-level image from the bibliograhpic detail
page's holdings table
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
During a Webinar discussion regarding the new placement of the circulation messages appearing in the Patron Detail page. It was commented by a librarian that it would be nice to have the circulation messages editable. At times libraries need to keep a specific message on a patrons account with the details such as what branch it was written from and the staff member that wrote it, but it would be nice to be able to edit this message.
Test Plan:
1) Apply this patch
2) Restart all the things!
3) Browser to a patron record
4) Create a new patron message
5) Note the patron message now has an "edit" button
6) Edit the existing message using the edit button and form
7) Check the action logs for that message, note there is a modification
logged to that message if BorrowersLog is enabled
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Basically, the phrase "System prefs" used on the log viewer page (viewlog.pl) is slang and we should use the correct terminology that we use everywhere else.
Test Plan:
1) Apply this patch
2) Browes to Tools > Log viewer
3) Note under Modules, is shows "System preferences" now instead of
"System prefs"
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes changes the button markup in various tool
templates so that all submit buttons and any buttons that should should
be styled as primary buttons have the Bootstrap class "btn btn-primary."
To test, apply the patch and view pages in the tools section to confirm
that everything looks correct. In most cases there are no visible
changes.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a "page-section" container div around the log viewer
output.
To test, apply the patch and go to Tools -> Logs.
- Perform a log search which will return results.
- The table of results should appear in a white box.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a check on the existence of the object and passes this to the template
I also drop a level of IF by moving to ELSIF
To test:
1 - Enable ReturnLog amd IssueLog
2 - Checkout an item to a patron
3 - Return it
4 - View 'Modification log' tab of the borrwer
5 - Note item links, test them, they work
6 - Delete the item
7 - Reload and try links again, they do not work
8 - Apply patch
9 - Reload, no more links
10 - Checkout and return another item
11 - This one has links, and they work as before
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
What this patch does:
- change the navigation bar style
- change the breadcrumbs style
- change the "last borrower" link style
- move the search bar inside the navigation bar
- move the help link to the same row as the breadcrumbs
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Until now we logged undef as object in action_logs when an email
order was sent. With this patch the basket number is logged instead,
which will allow for reporting and also allows us to display a link
to the basket, if permissions permit (order manage), in the log
viewer.
To test:
- Make sure the ClaimsLog system preference is set to Log
- Create a vendor or make sure an existing vendor has an email set
- Make sure to add an SMTP server and link it to your library
- Create a basket in acqisitions and add an order line
- Click "E-mail order" to send the email
- Go to the log viewer, limit to module Acquisitions
- Verify that the entry show with a link to the basket in the
Object column
If the user doesn't have order_manage permission, the basket
number will still show, but isn't linked
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This enhancement changes recall fulfillment actions to log with the
FILL action. It will also update existing recalls FULFILL actions in
the database to use the FILL action.
To test:
1) Enable the UseRecalls system preference and set up your
recalls-related circulation rules. Confirm RecallsLog is enabled.
2) Check out an item to Patron B.
3) Log into the OPAC as Patron A and search for the item.
4) Place a recall on that item.
5) Go back to the staff client and check the item in. Confirm the recall
as waiting for Patron A.
6) Check out the item for Patron A to fill the recall.
7) Go to Tools -> Log Viewer. Confirm there is a FULFILL action. Choose
the following search params to browse system logs:
- modules: recalls
- actions: fill
8) Submit the search and confirm the recall DOES NOT show.
9) Apply the patch, update database, restart services.
10) Refresh the log viewer and repeat step 7. Submit the search and
confirm the recall DOES show. Confirm there is no longer a FULFILL
action as both holds and recalls will use FILL.
11) Check in the item.
12) Repeat steps 2-6. We are ensuring that future recalls are logged
using the FILL action.
13) Repeat step 7. Confirm all test recalls are now showing in search
results.
Sponsored-by: Catalyst IT
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
They need more complex solutions that would be better in a follow up ticket
to not drag this one too long.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
And a few minor fixes when they where causing issues for
translatability.
And rephrased a string about password reset to have it identical to
other strings with the same meaning.
Simplified via wrapping strings with <span> to split to huge
concatenated strings with a lot of %s everywhere.
== Test plan ==
This patch needs mainly proof reading. Still it's possible to do some
basic testing to demonstrate that adding a <span> in an IF doesn't
break anything.
Pick in one of the 110 modified templates a string that you know how to
display. Otherwise:
1. acquisitions => vendor => basket => add to basket =>
search "from existing record" => add order
2. Cancel the order
3. You see without issue "Bibliographic record will not be deleted"
4. administration => Patron categories
5. Try to delete a used and unused category
6. You see as expected
Category XXXX is in use. Deletion not possible!
and
Confirm deletion of category XXXX
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch addresses the itemnumber and biblionumber attributes for
recalls having been renamed.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This attribute name was changed to *item_level* but this two remaining
places kept calling it with the old name.
To test, verify things don't explode when looking at checkouts with
recalls and also in the log viewer.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To be nicer with translators.
Update the PO files for whichever languages will show how this is
useful.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Rebased-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
See recalls on Intranet
- old recalls (all inactive recalls)
- recalls queue (all active recalls) - cancel, expire, revert waiting status, multiple cancel, mark overdue
- recalls to pull (available but not yet waiting) - cancel
- recalls awaiting pickup (awaiting pickup, awaiting pickup more than RecallMaxPickUpDelay days) - expire, revert waiting status
- overdue recalls (overdue to be returned) - cancel, multiple cancel
- biblio recalls tab (all active recalls relevant to this bib) - cancel, expire, revert waiting status, mark overdue
- patron recalls tab (all active recalls relevant to this patron) - cancel, expire, revert waiting status, mark overdue
- patron recalls history tab (all recalls relevant to this patron) - cancel, expire, revert waiting status, mark overdue
- log viewer
and the general circulation of recalls
== TEST PLAN FOR RECALLS ==
ADMINISTRATION
1. Apply all patches
2. Run database updates, update schema files and confirm everything applies cleanly
3. Run tests and confirm everything passes:
t/db_dependent/Koha/Recall.t
t/db_dependent/Koha/Recalls.t
t/db_dependent/Stats.t
t/db_dependent/Circulation/CalcFine.t
t/db_dependent/Koha/Item.t
t/db_dependent/Koha/Biblio.t
t/db_dependent/Koha/Patron.t
t/db_dependent/XSLT.t
t/db_dependent/Search.t
t/db_dependent/Holds.t
t/db_dependent/Circulation/transferbook.t
t/db_dependent/Circulation.t
4. Go to Administration -> system preferences. Find the UseRecalls system preference. It should be DISABLED. Confirm RecallsMaxPickUpDelay is set to 7 by default.
5. Go to Administration -> circulation rules. Confirm there are no recalls circulation rules showing.
6. Test a few circulation flows: checking out, placing a reserve, checking in, fulfilling a reserve, etc. Confirm everything works as normal.
7. Go to Administration -> system preferences. Enable the UseRecalls system preference.
8. Go to Administration -> circulation rules. Set the following rules:
Recalls allowed (count) = 0
Recalls per record (count) = 0
On shelf recalls allowed ( If any unavailable / If all unavailable ) = If any unavailable
Recall due date interval (days) = 3
Recall overdue fine amount = (something different to your normal fine amount)
Recall pickup period (days) = 1
Throughout your testing, try with different combinations of these rules and itemtype / branchcode / categorycode. Also try with null values. Keep the circulation rules open in another tab so you can refer to and update these easily. You should also have at least one other tab open for the staff client, and a third tab open for the OPAC, for ease of testing.
9. Go to your account -> More -> Set permissions. Confirm the recalls permission is checked.
10. Set up a test user with OPAC login details (Borrower A). This could also be your own user, as long as you have OPAC login access.
11. Set up a test record (Biblio A) with at least two items (Item A and Item B) of the same item type (or an item type with the same recall circ rules).
PLACING A RECALL
12. Log in to the OPAC as Borrower A. Do a catalogue search with a term that will return multiple results, including Biblio A.
13. Click on Biblio A.
14. Notice there is a 'Place recall' button on the sidebar menu. Click this button. There will be a message saying that there are no items to recall - this is because all items are available.
15. Check out Item A to another borrower (Borrower B).
16. Refresh the 'Place recall' page. You will still NOT be able to place a recall - this is because Recalls allowed = 0 and Recalls per record = 0.
17. Edit the circulation rules to have the following values:
Recalls allowed (count) = 1
Recalls per record (count) = 1
18. Refresh the 'Place recall' page. You will now see the form to place a recall.
BIBLIO-LEVEL RECALL, NO TRANSFER
19. Place a biblio-level recall.
Pickup location: Branch A, the set branch when you are logged into the staff client
Recall not needed after (expiration date): whatever you want
Select 'recall next available item'
Click confirm
20. Confirm the recall is placed successfully. Confirm that the new due date displayed is correctly calculated to be today's date, plus 3 days (taken from the 'recall due date interval' circ rule)
21. In the staff client, look at Borrower B's account, and go to their Notices tab. Confirm they have received a 'Notification to return recalled item' notice.
22. Look at Borrower B's checkouts table. Notice the due date for their checkout has been adjusted, and there is now a note to say that the item was recalled and the due date adjusted.
23. Log in to the OPAC as Borrower B and go to your summary tab. Notice there is a note under their checkout to say the item had been recalled.
24. Log out of the OPAC and log back in as Borrower A.
25. Go to your summary tab. Confirm there is a Recalls tab with a count of 1.
26. Cancel the recall using the button. Confirm it cancels and the Recalls tab disappears.
27. Do a catalogue search with a term that will return multiple results, including Biblio A.
28. When the results load, notice there is a 'Place recall' button next to the 'Place hold' button. Click this 'Place recall' button.
29. Notice you are redirected straight to the form to place a recall.
30. Place a biblio-level recall again, following the steps in Step 19.
31. Go to your recalls history tab. Notice your first cancelled recall shows here.
32. Cancel the recall you just created, using the button. Confirm it cancels and you are redirected to your summary tab.
33. In the staff client, enable the UseCourseReserves system preference.
34. Go to the main menu, click Course Reserves.
35. Add a new course. (You may also have to define an authorised value for DEPARTMENT.)
36. Add Item A as a reserve to this course.
37. View Course Reserves in the OPAC. Click the course you just created.
38. Notice the reserve has a Recall button underneath it's 'Checked out' status. Click this button.
39. Place a biblio-level recall again, following the steps in Step 19.
40. Click the 'Place recall' link in the breadcrumbs.
41. Notice there is a message saying that you have reached the max number of recalls on this record. This is because Recalls allowed = 1 and Recalls per record = 1.
42. Edit the circulation rules to have the following values:
Recalls allowed (count) = 10
Recalls per record (count) = 5
43. Refresh the 'Place recall' page. You will now see the form to place a recall.
44. Create another test record (Biblio B) with at least one item (Item C).
45. Find this record on the OPAC and place a biblio-level recall again, following the steps in Step 19.
46. In the staff client, go to Circulation -> Old recalls. You should be able to see your two cancelled recalls.
47. Go to Circulation -> Recalls queue. Your current recalls should show here.
48. Use the 'Select all' checkbox to select all recalls.
49. Cancel the recalls using the 'Cancel selected recalls' button.
50. Go to the OPAC and place a biblio-level recall on Biblio A again, following the steps in Step 19.
51. In the staff client, check in Item A, which should still be checked out to Borrower B.
52. A box should pop-up asking you to confirm Borrower A's recall. Click ignore.
53. Click the link to go view Biblio A's details in the catalogue.
54. Click the recalls tab. Notice Borrower A's recall is displayed, and shows it is still Requested (has not been confirmed waiting).
55. Check in Item A again. This time, confirm the recall as waiting using the "Confirm recall" button.
56. Go to Borrower A's Notices tab. Confirm there is a notice "Recalled item awaiting pickup".
57. Go to Borrower A's checkouts. Notice there is a recalls tab. Confirm the recall is showing as "Ready for pickup".
58. Click the 'Actions' dropdown. Click the "Revert waiting" button. The page should show a message that the waiting status has been reverted, without reloading.
59. This time, check in Item B. The recall confirmation box should show again, because this a biblio-level recall that any recallable item under Biblio A can fill. Click the "Print slip and confirm" button.
60. Check the slip that is generated. Confirm it contains Borrower A's correct details, and the details of the recall are correct.
61. Go to Circulation -> Recalls awaiting pickup. Confirm the recall is now waiting and shows in this list.
(You could also try this with Item B having a different item type to Item A, and circ rules not allowing Item B's item type to have recalls. When checking in Item A, it should not trigger the recall box).
62. Go to Borrower A's checkouts. Check out Item B.
63. Confirm the checkout is successful and the recall is removed from the Recalls tab.
64. Go to Circulation -> Old recalls. The fulfilled recall should show.
65. Check in Item B.
BIBLIO-LEVEL RECALL, TRANSFER REQUIRED
66. Check out Item A to Borrower B.
67. Log in to the OPAC as Borrower A.
68. Find Biblio A and place a biblio-level recall.
Pickup location: Branch B, a different branch from your logged in branch. This recall will require a transfer.
Recall not needed after (expiration date): whatever you want
Select 'recall next available item'
Click confirm
69. In the staff client, check in Item A at Branch A. Notice the box that pops up shows that a transfer is required.
70. Click "confirm recall and transfer" and confirm the transfer.
71. Go to your account and click the Recalls tab.
72. Confirm the recall status now shows the item is in transit to Branch B.
73. In the drop-down top-right of your window, select 'Set library'.
74. Set your library to Branch B.
75. Go to Circulation -> Transfers to receive. Notice that the recall is showing here.
76. Click 'Cancel transfer'.
77. Go to Circulation -> Recalls queue
78. Confirm the recall status has been reverted to Requested.
79. Set your library back to Branch A.
80. Check in Item A and trigger the transfer.
81. Set your library back to Branch B.
82. Check in Item A at Branch B.
83. When the 'Recall found' box pops up, click Ignore.
84. Go to Circulation -> Recalls to pull. The recall should show here, with a button to "Cancel recall and return to: Branch A"
85. Click the button to cancel the recall.
86. Repeat Steps 66-70.
87. Check in Item A at Branch B. Confirm the recall as waiting.
88. Check out Item A to Borrower A to fulfill the recall.
89. Set your library back to Branch A and check in Item A.
ITEM-LEVEL RECALL, NO TRANSFER
90. Go to Administration -> circulation rules. Set the following rules:
On shelf recalls allowed ( If any unavailable / If all unavailable ) = If all unavailable
91. Check out Item A to Borrower B.
92. Log in to the OPAC as Borrower A and go to Biblio A.
93. Click the 'Place recall' button. Confirm there is a message that there are no items to recall. This is because On shelf recalls allowed = If all unavailable, and there is still one item (Item B) available.
94. In the staff client, edit Item B to have a withdrawn, item lost or not for loan status.
95. Refresh the 'Place recall' page. Confirm you can now see the form to place a recall.
96. Place an item-level recall.
Pickup location: Branch A.
Recall not needed after (expiration date): whatever you want
Select 'recall a specific item'
Item B will not be selectable, and Item A should be selected by default.
Click confirm
97. In the staff client, edit Item B and remove the lost or missing status.
98. Check in Item B. Confirm the recall box does not pop up, because it cannot fill the item-level recall.
99. Check in Item A. Confirm the recall as waiting.
100. Go to Circulation -> Recalls awaiting pickup
101. Expire the recall. Confirm it expires as expected.
ITEM-LEVEL RECALL, TRANSFER REQUIRED
102. Repeat steps 91 to 95.
103. Place an item-level recall.
Pickup location: Branch B, we will require a transfer.
Recall not needed after (expiration date): whatever you want
Select 'recall a specific item'
Item B will not be selectable, and Item A should be selected by default.
Click confirm
104. In the staff client, check in Item A. Confirm the recall and trigger the transfer.
105. Set your library to Branch B and check in Item A.
106. Confirm the recall as waiting.
107. Check out Item A to Borrower A and fulfill the recall.
108. Set your library back to Branch A and check in Item A.
CRONJOBS: EXPIRING RECALL
109. Check out Item A to Borrower B.
110. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
111. In your terminal, enter mysql and edit the expiration date of your recall to be before today
UPDATE recalls SET expirationdate = NOW()-2 WHERE recall_id = X;
112. Run the expiry cronjob from within your shell
perl misc/cronjobs/recalls/expire_recalls.pl
113. Go to Borrower A's account and go to the Recalls history tab
114. Confirm the recall has been expired because the current date surpassed the specified expiration date
115. Check out Item A to Borrower B.
116. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
117. In the staff client, check in Item A and confirm the recall as waiting.
118. In your terminal, enter mysql and edit the waiting date of your recall to be before today
UPDATE recalls SET waitingdate = NOW() - interval 5 day WHERE recall_id = X;
119. Run the expiry cronjob from within your shell
perl misc/cronjobs/recalls/expire_recalls.pl
120. Go to Borrower A's account and go to the Recalls history tab
121. Confirm the recall has been expired because the recall had been waiting for more days than the Recall pickup period
122. Go to Administration -> circulation rules. Set the following rules:
Recall pickup period (days) = 0
123. Set the RecallsMaxPickUpDelay system preference = 1.
124. Check out Item A to Borrower B.
125. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
126. In the staff client, check in Item A and confirm the recall as waiting.
127. In your terminal, enter mysql and edit the waiting date of your recall to be before today
UPDATE recalls SET waitingdate = NOW()-2 WHERE recall_id = X;
128. Run the expiry cronjob from within your shell
perl misc/cronjobs/recalls/expire_recalls.pl
129. Go to Borrower A's account and go to the Recalls history tab
130. Confirm the recall has been expired because the recall had been waiting for more days than the RecallsMaxPickUpDelay syspref
CRONJOBS: OVERDUE RECALL
131. Check out Item A to Borrower B
132. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
133. In your terminal, enter mysql and edit the due date of the checkout to Borrower B to be before today
UPDATE issues SET date_due = NOW()-2 WHERE issue_id = X;
134. Run the overdue cronjob from within your shell
perl misc/cronjobs/recall/overdue_recalls.pl
135. Go to Circulation -> Overdue recalls
136. Confirm your recall is showing here now as the recall has been marked Overdue
CIRCULATION
137. Check in Item A.
138. When the recall box pops up, click Ignore.
139. Check out Item A to Borrower B. You should see a yellow confirmation box, saying that another borrower has recalled the item you are trying to check out.
140. Click "No don't check out" and confirm the item isn't checked out and the recall remains.
141. Repeat Step 139.
142. Click "Yes check out" and confirm the item is checked out and the recall remains.
143. When Borrower B's checkout table loads, confirm that you cannot renew or check in the item from the Checkouts table because there is a 'Recalled' link which takes you to the recalls tab for that biblio.
144. Repeat Steps 137-139.
145. Select "Cancel recall" and click "Yes check out" and confirm the item is checked out and the recall has been cancelled.
146. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
147. Check in Item A. Confirm the recall as waiting.
148. Check out Item A to Borrower B. You should see a yellow confirmation box, saying that that another borrower has recalled the item that you are trying to check out.
149. Select "Revert waiting status" and click "Yes check out" and confirm the item is checked out and the recall status has reverted to requested.
OTHER
150. In your terminal, enter mysql and edit the due date of the checkout to Borrower B to be before today
UPDATE issues SET date_due = NOW()-2 WHERE issue_id = X;
151. Go to Borrower A's recalls and click the Actions dropdown.
152. Click "Mark as overdue" and confirm the recall is marked as overdue manually.
153. Go to Tools -> Log Viewer. Check only the Recalls module, and leave all other parameters, and click Submit.
154. Confirm all of the recalls actions that have been made are correctly logged.
Note: recalls messaging preferences are introduced in Bug 23781.
The recall feature is fully documented at: https://wiki.koha-community.org/wiki/Catalyst_IT_Recalls
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch moves to using a data-start_for attribute to point the 'from'
flatpickr to the 'to' flatpickr.
We also fix the date validation issue in the onClose handler inline.
Test plan.
1. Check that the from/to datpicker combinations work on each of the
changed pages.
2. Look at the console for errors, there should be none
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch replaces the use of jQueryUI's datepicker on tools pages.
To test, apply the patch and test the following tools pages to confirm
that datepickers work correctly. "Linked" date fields should prevent a
"to" selection which preceeds the selected "from" date.
- News -> New entry: Linked fields "Published date" and "Expiration
date".
- Batch extend due dates: Linked fields "Due date from" and "Due date
to"; "Hard due date" field.
- Batch patron deletion: "who have not borrowed since," "whose
expiration date is before," and "Permanently delete checkout history
older than."
- Export: Linked "Start date" and "End date" fields.
- Import patrons -> Enter default values: "Date of birth,"
"Registration date," and "Expiry date."
- Inventory: "Set inventory date to."
- Batch patron modification -> Submit a batch of cardnumbers or a
patron list: "Registration date," "Expiry date," and "Restriction
expiration."
- Task scheduler: "Date" field.
- Log viewer: "Display from" and "Display to" linked fields.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The logging for additional contents added by bug 26205 has been broken
by but 22544.
This patch is a revisited version as bug 24387 has been pushed.
It does not log MODIFY if no modification has been made on a template
(useful when only 1 version/lang of a content has been modified)
Test plan:
Turn on NewsLog
Add/modify and delete additional contents/News and confirm that
modification are logged.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Maura Stephens <maura.stephens@gmit.ie>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
As news are usable in OPAC and staff interface, I suggest changing the code
to just be NEWS instead of OPACNEWS.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1. Apply patch, updatedatabase, restart_all
2. Make sure the system pref 'NewsLog' is turned on.
3. Go to the Koha News tool and create a new news item.
4. View the logs and display only the OPAC News module
5. You should see your new news, it will include the lang (
OPACheader_en ) and the content of the news item.
6. Filter the logs so the only action is 'Add', your new news item
should appear
7. Modify some news items
8. They should appear in the logs now as modification.
9. Make sure you can filter the action to 'Modify' and can confirm it
works
10. Delete some news items
11. They should appear in the logs now as deletinon
12. Make sure you can filter the action to 'Delete' and can confirm it
works
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The following actions were missing from the template,
so the code showed instead of a translatable description:
* ACQUISITION CLAIM
* ACQUISITION ORDER
* SERIAL ORDER
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds additional basket logging as discussed in comment #14
- Basket reopening
- Basket users (manager) modification
- Basket header modification
Signed-off-by: Holly <hc@interleaf.ie>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds logging for the following Acq actions:
- Basket creation
- Basket editing
- Basket approval (via EDI)
- Basket closure
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 23971: (QA follow-up) New DBrev syntax
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Swapped the order of the page titles to have the unique information
first, i.e. the name of the specific page displays first, and the name of the website (e.g. Koha) displays at the end.
To test:
1) Apply patch
2) Ensure each of the files in the tools folder are swapped around
to display the most unique information first, and the website name is at the end
3) Ensure the pages displayed on the Staff Client that correspond to
these files also display the changes
Sponsored-by: Catalyst IT
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Henry Bolshaw <bolshawh@parliament.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This enhancements adds support for logging changes to notices and slips.
Features include:
- a system preference (NoticesLog) which allows you to enable logging changes for notices and slips
- logging new notices, changes to notices, and deletion of notices
- filtering in the log viewer so you can show all changes for a specific notice
- a comparison feature, so you can see what changes were made to a notice.
Test plan:
1/ Add some 'Notice' action logs by adding a new notice or updateing an
existing notice
2/ Go to the 'Log viewer' under 'Tools'
3/ Note you can filter by 'Notices'
4/ Confirm the changes you made appear in the logs and that the 'Object'
field links back to the updated notice ready for editing.
1/ Make some changes to at least two different notices to trigger logs
2/ Go to the 'Log viewer' from 'Tools' and filter on 'Notices'
3/ Note, you can now see the 'Compare' checkbox option for these logs
4/ Select the checkbox on one of the notices and note that the results
are now filtered by that specific notice.
5/ Select a second checkbox to expose the option to 'View comparison'
6/ Click 'View comparison' to see the 'Diff view' of the two notices.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
I think the "breadcrumbs" ID is worth saving for past and future CSS
customization reasons.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Modified breadcrumbs to be accessible, in particular for a
screen-reader.
Made the block of breadcrumbs be a <nav aria label="Breadcrumb"
class="breadcrumb"> with an ordered list inside. The last breadcrumbs
also has aria-current="page" to specify that it is the current page.
To test:
1) Apply patch
2) Build scss file
3) Ensure each of the files in the tools and virtualshelves folders have
breadcrumbs that are in a <nav aria label="Breadcrumb"
class="breadcrumb"> block
4) Ensure that there is an ordered list in the block of breadcrumbs
5) Ensure that the last breadcrumb has aria-current="page"
6) Ensure that the breadcrumbs on each page of the staff client
belonging to these files look the same as before, but the '>' symbol
is replaced with '/' and the last breadcrumb has bold text
7) Ensure that when the last breadcrumb is clicked it takes you to the
page you are currently on
Sponsored-by: Catalyst IT
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Search engine administration is very important,
we should log who/when it is changed.
I don't add a preference system to disable it,
like there is no for preference system logs.
Test plan :
1) Use searchengine Elasticsearch
2) Go to Administation > Search engine configuration (Elasticsearch)
3) Click on 'Reset Mappings' and accept
4) Edit some lines and save
5) Go to 'Tools' > 'Log viewer'
6) Select only 'Search engine' in Modules and submit
7) Select only 'Edit mappings' in Actions
8) Check you see a log
9) Select only 'Reset mappings' in Actions
10) Check you see a log
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This commit implements the feedback from Katrin in comment #103 ->
comment #108:
- Fixed rebase issue mentioned in comment #103
- Fixed ILL notice display mentioned in comment #106
- Fixed bug with metadata display, though not the issue that was
mentioned in comment #107
- Fixed buttons display mentioned in comment #107, in addition to some
more buttons suffering the same issue
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the ability to compare the log entries for reports
in the system log. The user can select two entries in the log search
results and view a diff of the two versions.
To test, apply the patch and check that the ReportsLog system
preference is enabled. If it isn't, enable it and make some changes to
saved SQL reports so that you have log entries to test with.
This is a trivial patch that simply adds "REPORTS" type log entries to
the list of modules which can be selected for comparison. The full test
plan is basically the same as that for Bug 26207:
- Perform a search for log entries in the "Reports" module.
- In the results, each entry for a report update should have a
"Compare" checkbox."
- Check one of the checkboxes.
- The table should now be filtered by the report title. This
facilitates meaningful selections for comparison.
- You should see a message displayed onscreen, "Showing results
for...[report name]"
- The "Check none" link in the toolbar above the table should now be
enabled.
- If youy click the "Compare selected" link in the toolbar at this
stage you should get a message, "You must select two entries to
compare."
- If you uncheck the checkbox the table should return to an unfiltered
state.
- Check two checkboxes.
- The "Compare selected" link in the toolbar should now be enabled.
- Next to each of the checkboxes you checked should be a "View
comparison" link.
- Clicking either of the "View comparison" links or the "Compare
selected" link should trigger a modal with the diff view of the two
reports log entries.
- Try to select a third checkbox. You should get a message, "You can
select a maximum of two checkboxes." The box should remain unchecked.
- Test that unchecking both checkboxes manually clears the table filter.
- Test that the "Check none" link works to uncheck checked boxes and
clear the table filter.
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
