Adding one backslash makes a difference :)
We need to escape the dot in the regex to exclude a file like zzpref
from translation too. Perfect_regexes++
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Text editors can create temporary files in this folder and this can
confuse the translator.
For instance, vim can create a file named '.opac.pref.swp' which will
make the translator dies with the following error message:
Can't use string ("b0VIM 8.0") as a HASH ref while "strict refs" in use
at LangInstaller.pm line 248.
Test plan:
1. echo 'Oops' > .../en/modules/admin/preferences/whatever.pref.whatever
2. cd misc/translator && ./translate update fr-FR
3. Verify that you have the error message mentioned above
4. Apply patch
5. cd misc/translator && ./translate update fr-FR
6. No more errors!
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Problem on this report was caused by translating the tabs Privacy
and Payments by the same string. This caused overwriting a hash entry.
This patch tests if the key already exists and if so, it merges the
entries instead of overwriting the old contents.
Test plan:
[1] Make sure that e.g. Privacy and Payments translate to e.g Vie privee.
[2] Run translate install fr-CA (or the language you altered)
[3] Without this patch you should loose preferences from either Privacy or
Payments. With this patch, they should be merged.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested with fr-CA.
Signed-off-by: Blou <philippe.blouin@inlibro.com>
Reset the .po files, reproduced the problem. Applied the patch and suddenly 'paypal' appeared.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 15527 add an xslt dir, LangInstaller.pm must ingnore that dir.
To test:
1) Verify the problem on current master
Update translation for any lang, will see errors
2) Apply the patch
3) Update again, no errors
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Works as expected.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Mainly a
perl -p -i -e 's/^.*3.07.00.049.*\n//' **/*.pm
Then some adjustements
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
perl -p -i -e 's/^(use vars .*)\$VERSION\s?(.*)/$1$2/' **/*.pm
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Just upgraded our Koha container to 14.04 and noticing the
misc/translator/translate doesn't work. This is because of a missing
package gettext.
This patch makes ./translate die with a helpful suggestion to install
gettext if xgettext-program is missing.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
I can reproduce the bug by desinstalling 'gettext' package on a Debian
box. I confirm that without this patch, 'translate' command fails
miserably. Suggesting to install gettext package is welcomed.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
This patch renames translation files for Bengali
language, from ben-* to bn-IN-*.
Also adds India as region
To test:
1) Apply the patch
2) Run updatedatabase
3) Install Bengali language
cd misc/translator
perl translate install bn-IN
enable
Check correct description
4) Create and install a fake Bengali variant
cd misc/translator
perl translate create bn-XX
perl translate install bn-XX
enable both variants
Check correct rendering of region
Results comply with expected test plan outcome. Signed off for bn-IN
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch gives a partial solution for this problem.
It ignores strings like "[% something %]", but not
"[% IF ( value ) %][% value %][% END %]"
We get 100+ strings less to translate
To test:
1) Update translation files for your preferred language
2) Apply the patch
3) Update again
4) Compare, you must find 100+ strings removed from
translation files
eg.
-msgid "[% SEARCH_RESULT.biblionumber |url %]"
-msgid "[% accepteddate | $KohaDates %]"
-msgid "[% amountoutstanding | format('%.2f') %]"
-msgid "[% authtypetext |html %]"
-msgid "[% barcode_llx |html %]"
-msgid "[% barcode_lly |html %]"
-msgid "[% biblio.quantity.length ? biblio.quantity : 1 %]"
-msgid "[% billingdate | $KohaDates %]"
-msgid "[% borname |html %]"
...
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Verified all strings removed from the po files were
pure TT.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch implements separate PO files for
different MARC dialects.
It depends on correct filenames, i.e. it will build PO
files using files with/without "unimarc|normarc|marc21"
on their names.
Changes:
A) LangInstaller.pm
Added definitions to create or update xx-YY-{MARCFLAVOR}.po,
minor change to create and install procedure, and modification
of install procedure to handle multiple target dirs.
Updated documentation.
B) Standarization of filenames
STAFF po file is now xx-YY-staff-prog.po
MARC dialects po files are xx-YY-marc-{MARCFLAVOUR}.po
To test:
1) Update po files for your preferred language, ej. nn-NO
cd misc/translator
perl translate update nn-NO
2) Do some copying/renaming
cp po/nn-NO-i-staff-t-prog-v-3006000.po po/nn-NO-marc-UNIMARC.po
cp po/nn-NO-i-staff-t-prog-v-3006000.po po/nn-NO-marc-NORMARC.po
cp po/nn-NO-i-staff-t-prog-v-3006000.po po/nn-NO-marc-MARC21.po
mv po/nn-NO-i-staff-t-prog-v-3006000.po po/nn-NO-staff-prog.po
(most MARC dialect strings are on staff, so we use that as basis)
3) Apply the patch
4) Update again to fix translation files, verbose
perl translate update nn-NO -v
5) Install language, verbose, verify translations
perl translate install nn-NO -v
6) Create translation files
rm po/nn-NO*
perl translate create nn-NO
we must have this list:
po/nn-NO-marc-MARC21.po
po/nn-NO-marc-NORMARC.po
po/nn-NO-marc-UNIMARC.po
po/nn-NO-opac-bootstrap.po
po/nn-NO-pref.po
po/nn-NO-staff-help.po
po/nn-NO-staff-prog.po
Additional tests:
7) Number of msgids
7.a) Before patch and after upgrade, extract and count msgids
for i in $(ls po/nn-NO-*po); \
do msginit -i $i -o nn-old.po --no-translator --no-wrap --locale=nn_NO; \
egrep ^msgid nn-old.po >> old; \
done
sort old | uniq | tee s-old | wc -l > n-old
s-old: have all msgids
n-old: number of msgids
7.b) After patch and after creation of new files
Repeat procedure, diferent files (s-new, n-new)
7.c) Compare (diff s-old snew), they are the same
(save for a strange UNIMARC char in my case, but
it's present on corresponding PO file)
8) Installed dirs/files
8.a) List of EN dirs/files
cd koha-tmpl
find | egrep "/en/" > en
8.b) List of nn-NO dirs/files. After patch and language install
cd koha-tmpl
find | egrep "/nn-NO/" | sed 's|/nn-NO/|/en/|' > nn
8.c) Compare (diff en nn), they are the same
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Followed the steps outlined by Bernardo, and everything works as
expected. I think the most important points are that "perl translate
create nn-NO" produces the right files, and translating anything in
them, then doing "translate install" makes the translations show
up in the interface. The numbers msgids in the nn-NO correspond
well wit the number of msgids in other sets of .po files.
I bet y'all will be happy when you don't have to see the stupid
Norwegian strings when you translate! ;-)
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
http://bugs.koha-community.org/show_bug.cgi?id=9987
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch set as fuzzy some strings on translation files
that are incorrectly translated
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Makes translations work.
I left the code logic intact, and simply removed "text" from the regex.
Text input field values are now translated, no other logical changes are introduced.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Test:
1) Update, install and enable es-ES language
2) Go to Reports > Acquisition wizard
3) On page bottom, there is a text field with the word 'Export'
4) Switch language, the word is not translated
5) Apply the patch
6) Update and install again es-ES language
7) Reload page, text now reads 'Exportar'
No koha-qa errors.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
A dir creation was uncommented (by me), the effect is
create a lang dir on 'update', which is no needed.
To test:
1) Update translation files for a uninstalled language
(cd misc/translator; ./translate update xx-YY)
2) Check new dirs
koha-tmpl/opac-tmpl/bootstrap/xx-YY/
koha-tmpl/intranet-tmpl/prog/xx-YY/
koha-tmpl/intranet-tmpl/prog/en/modules/help/xx-YY/
3) Clean all
git clean -f -d
4) Apply the patch
5) Repeat 1) (i.e. update)
6) Check no new dirs this time
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested according to test plan, works as described.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Kurdish translation files use a variant of Arabic script,
they need to be displayed as RTL.
Currently that is inferred from language dir name after
translation, and that name use the language tag, so we
need to change it from 'ku' to 'ku-Arab'
To test:
1) Translate to Kurdish
(cd misc translator; ./translate install ku)
2) Enable Kurdish on opac/staff
3) Test staff/opac interface, they are displayed as LTR
which is wrong
4) Disable Kurdish language
5) Do a cleanup (git clean -f -d)
5) Apply the patch
6) Translate again
(cd misc translator; ./translate install ku-Arab)
7) Enable again
8) Test again, this time display is correct (LTR)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Easy to test. Well spotted Bernardo.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described.
Patch removes outdated translation tool documentation
from the misc/translator directory.
Signed-off-by: Magnus Enger <digitalutvikling@gmail.com>
Removing these lines sounds like a good idea. I tested by
applying the patch and checking that the files in question
are gone.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch makes opac translation files theme independent
A side effect is that current prog translation file is
renamed.
But the renaming is not added, that gives a patch of ~60M!
Current list of languages are now obtained from pref files.
To test:
1) Apply the patch
2) For your preferred language, rename opac prog file
from 'xx-YY-i-opac-t-prog-v-3006000.po' to 'xx-YY-opac-prog.po'
3) Update that language, there must be no errors
cd misc/translation
./translate update xx-YY [-v]
Check updated po files
4) Install any language, there must be no errors
./translate install xx-YY
Check prog theme for that language
5) Create translation files. Remove a language or create new lang files
./translate create zz-WW
ls -l po/zz-WW*po
check there are 3 files (and *~) for opac
6) Check updated pod for LangInstaler.pm and translate script
When PROG/CCSR themes are removed, I'll add a Bug to remove
corresponding files.
Perhaps RM could add a followup to rename all files,
cd misc/translator/po
for old in $(ls *opac-t*); do
new=$(echo $old | sed 's/-i-opac-t-prog-v-3006000/-opac-prog/');
git mv $old $new;
done
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch modifies LangInstaller.pm to catch strings
on syspref files that have no associated syspref
To test:
1) Update strings for your preffered language
2) Check that the string "you can only choose one source"
is not present on xx-YY-pref.po file
3) Apply the patch
4) Update strings again
5) Check the strig now appears [ and another one :) ]
Doing a diff before and after will show
# Enhanced Content > All
msgid "enhanced_content.pref## <strong>NOTE:</strong> you can only
choose one source of cover images from below, otherwise Koha will show
the images from all sources selected."
msgstr ""
# Local Use
msgid "local_use.pref## Nothing defined yet."
msgstr ""
6) Translate the string
7) Install your language, check Administration > System preferences >
Enhanced content > All
(on your languge) and check the string is now translated
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds options to include/exclude files by matching their names.
Also modifies current code to check only filenames (not dirs)
Checking is case insensitive !!
NOTE: The difference between -f and -m is subtle, but important.
They differs mainly on update,: -f do a merge, -m a replace
To test after patch:
A) Include only 'normarc'
1. create
cd misc/translator
perl tmpl_process3.pl create -i ../../koha-tmpl/opac-tmpl/bootstrap/en -s normarc.po -r -m normarc
- check provenance of strings
egrep "^#:" normarc.po | cut -d":" -f2 | sort | uniq
- only files with normarc in their names must be present
2. update
perl tmpl_process3.pl update -i ../../koha-tmpl/opac-tmpl/bootstrap/en -s normarc.po -r -m normarc
- repeat check
3. install
mkdir test
perl tmpl_process3.pl install -i ../../koha-tmpl/opac-tmpl/bootstrap/en -o ./test -s normarc.po -r -m normarc
- check name of created files
rm -rf test normarc.po
B) Exclude
4. create
perl tmpl_process3.pl create -i ../../koha-tmpl/opac-tmpl/bootstrap/en -s xnormarc.po -r -n normarc
- check provenance
egrep "^#:" xnormarc.po | cut -d":" -f2 | sort | uniq | grep -i normarc
- there must be no results
5. update
perl tmpl_process3.pl update -i ../../koha-tmpl/opac-tmpl/bootstrap/en -s xnormarc.po -r -n normarc
- check provenance
6. install
mkdir test
perl tmpl_process3.pl install -i ../../koha-tmpl/opac-tmpl/bootstrap/en -o ./test -s xnormarc.po -r -n normarc
- check files
find test | grep -i normarc
- there must be no results
You can also try another combination, use for example "-m patron -m user -m bottom" (or use -n)
or mixed "-m marc -n normarc", do create/install and look filenames
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds the option to use multiple source
dirs for tmpl_process3.pl on create/update actions.
To test after patch:
A) Old
1. install
cd misc/translator
perl tmpl_process3.pl create -i ../../koha-tmpl/opac-tmpl/bootstrap/en -s bootstrap.po -r
2. update
perl tmpl_process3.pl update -i ../../koha-tmpl/opac-tmpl/bootstrap -s bootstrap.po -r
3. install
mkdir test
perl tmpl_process3.pl install -i ../../koha-tmpl/opac-tmpl/bootstrap -s bootstrap.po -r -o ./test -q
- check same number of files
ls -lR ../../koha-tmpl/opac-tmpl/bootstrap | wc -l
ls -lR ./test | wc -l
rm -f bootstrap.po
B) New
4. create from multiple sources
perl tmpl_process3.pl create -i ../../koha-tmpl/opac-tmpl/prog/en -i ../../koha-tmpl/opac-tmpl/bootstrap/en -i ../../koha-tmpl/opac-tmpl/ccsr/en -s opac.po -r
5. update from multiple source
perl tmpl_process3.pl update -i ../../koha-tmpl/opac-tmpl/prog/en -i ../../koha-tmpl/opac-tmpl/bootstrap/en -i ../../koha-tmpl/opac-tmpl/ccsr/en -s opac.po -r
6. install (must give an error)
perl tmpl_process3.pl install -i ../../koha-tmpl/opac-tmpl/prog/en -i ../../koha-tmpl/opac-tmpl/bootstrap -s opac.po -r -o ./test
7. updated help
perl tmpl_process3.pl --help
Any other functionality must not be affected
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch modifies the update process for PO files,
removing obsoleted strings. Currently they are removed
manually as part of the standar procedure of strings update.
Also backup files (*~) need to be removed manually.
To test:
1. Update translation files for any language, ej. fi-FI
(cd misc/translation; perl translate update fi-FI)
2. Check existence of obsoleted strings
egrep "#~ msg" misc/translator/po/fi-FI-*
3. Check existence of backup files
ls misc/translator/po/fi-FI-*~
4. Reset to HEAD and clean
5. Apply the patch
6. Update again, check there are no more obsoleted
strings nor backup files
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since we switched to Template Toolkit we don't need to stick with the
sufix we used for HTML::Template::Pro.
This patch changes the occurences of '.tmpl' in favour of '.tt'.
To test:
- Apply the patch
- Install koha, and verify that every page can be accesed
Regards
To+
P.S. a followup will remove the glue code.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Using perl v5.18, the following is warned on updating/installing
templates:
Smartmatch is experimental at ./translate line 54.
Moreover, the following should exist with previous perl versions:
perlcritic xgettext
Subroutine prototypes used at line 29, column 1. See page 194 of PBP.
(Severity: 5)
Subroutine prototypes used at line 44, column 1. See page 194 of PBP.
(Severity: 5)
Subroutine prototypes used at line 60, column 1. See page 194 of PBP.
(Severity: 5)
Subroutine prototypes used at line 72, column 1. See page 194 of PBP.
(Severity: 5)
Subroutine prototypes used at line 89, column 1. See page 194 of PBP.
(Severity: 5)
Variable declared in conditional statement at line 105, column 13.
Declare variables outside of the condition. (Severity: 5)
Subroutine prototypes used at line 127, column 1. See page 194 of PBP.
(Severity: 5)
Subroutine prototypes used at line 136, column 1. See page 194 of PBP.
(Severity: 5)
Variable declared in conditional statement at line 190, column 7.
Declare variables outside of the condition. (Severity: 5)
Subroutine prototypes used at line 237, column 1. See page 194 of PBP.
(Severity: 5)
Bareword file handle opened at line 238, column 5. See pages 202,204 of
PBP. (Severity: 5)
Two-argument "open" used at line 238, column 5. See page 207 of PBP.
(Severity: 5)
Subroutine prototypes used at line 277, column 1. See page 194 of PBP.
(Severity: 5)
Subroutine prototypes used at line 311, column 1. See page 194 of PBP.
(Severity: 5)
Bareword file handle opened at line 350, column 9. See pages 202,204 of
PBP. (Severity: 5)
Two-argument "open" used at line 350, column 9. See page 207 of PBP.
(Severity: 5)
Bareword file handle opened at line 353, column 5. See pages 202,204 of
PBP. (Severity: 5)
Bareword file handle opened at line 359, column 5. See pages 202,204 of
PBP. (Severity: 5)
Two-argument "open" used at line 359, column 5. See page 207 of PBP.
(Severity: 5)
perl -wc xgettext.pl
\1 better written as $1 at TmplTokenizer.pm line 474.
main::token_negligible_p() called too early to check prototype at
xgettext.pl line 52.
xgettext.pl syntax OK
Test plan:
Apply this patch and verify the warnings/errors does not appear anymore
and no regression is found on creating/updating/installing templates.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no koha-qa errros.
Tested with perl v5.18.2
No warnings, no problem detected on create/update/install i18n files
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Instead of writing
use CGI;
use Koha::I18N;
my $cgi = new CGI;
my $lh = Koha::I18N->get_handle_from_context($cgi, 'intranet');
print $lh->maketext('my translatable text');
you can now write
use Koha::I18N;
print gettext('my translatable text');
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
CHARSET is now automatically replaced by UTF-8, and 'update' creates the
PO file if it does not exist.
Also do not try to create PO files if POT file creation failed (when
there is no messages to translate for example).
+ add some verbosity
+ add Locale::Maketext and Locale::Maketext::Lexicon to Koha
dependencies
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
You have to use the new module Koha::I18N
Code example:
use Koha::I18N;
use CGI;
my $input = new CGI;
my $lh = Koha::I18N->get_handle_from_context($input, 'intranet');
print $lh->maketext("Localized string!");
PO files are in misc/translator/po/LANG-messages.po.
Creation of PO files are integrated to existing workflow, so to create
PO file for a language, just run in misc/translator:
./translate create LANG
To update:
./translate update LANG
You can then translate the PO with your favorite editor. Strings will be
localized at runtime.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Works as advertised. Some details needing further attention noted on bug
report.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch removes several types of strings from the
PO files that cannot be usefully translated, including
ones that consist entirely of punctuation and/or HTML entities.
Test:
1) Update PO files of some lang, xx-YY-*po
cd misc/translator
perl translate update xx-YY
2) Do it again, just in case
3) rm po/xx-YY*po~
4) Extract all msgid's, sorted
cat po/xx-YY*po | egrep "^msgid" | sort | uniq > xx-YY-pre
5) Apply the patch
6) Repeat 1-3
7) Repeat 4 again, other file
cat po/xx-YY*po | egrep "^msgid" | sort | uniq > xx-YY-post
8) Do a diff, inspect results, only strings with %s and \s
diff xx-YY-pre xx-YY-post | less
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works as described, 380 strings less to 'translate'
No koha-qa errors.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested according to test plan, works as described.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The SQL column headers is stored into the columns.def file.
This file is not managed by the translation script.
This patch makes possible the headers translation.
Note: The translation xml tags were added to avoid all lines being put
on a single line.
Test plan:
1/ update your po file
cd misc/translate;
perl translate -f columns update LANG # Replace by another language here
2/ translate header columns (search "columns.def" in your po file).
3/ install the translated columns.def
perl translate -f columns install LANG # Replace by another language here
4/ go on the report module > create a new report > next > next
5/ change the language
on the 3rd step, you should see the column header translated.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no koha-qa errors
[on es-ES about a third of the strings translated!! :-) ]
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described and fixes a long standing translation
problem.
Passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch enable deletion of temp files used by
tmpl_process3.pl.
Just removed coments on existing code
To test:
1. Do a count of files on /tmp ( ls /tmp | wc -l )
2. Update preferred language
3. Count again, new files on /tmp
4. Apply the patch
5. Update again, check, no new files
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: I watched what temp files were actually in /tmp to make
sure other processes didn't magically increase/decrease
the number.
$ perl translate update {lang code}
generated 10 temporary files for me (2x5 po files). After
removing those ten files, and applying the patch, no
other files were generated.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
These lines has been commented by commit
a399dcefad without any apparent good
reason.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The problem is with the name of PO files
Currently Koha expect, among other variants, that PO filenames
began with (using as example *-pref.po):
{lang}-pref.po
{lang}-{region}-pref.po
{lang}-{script}-pref.po
{lang}-{script}-{region}-pref.po
and expect 2 chars for lang and region, and 4 for script
So the problem with Thai translation files are that it's names
do not match that convention.
This patch only rename Thai files as th-THA-* to th-TH-*.
In that way language description is right.
translate script use that chars to make dirs, and use dirs to find
description.
To test:
1) Go to I18N/L10N sysprefs
2) Install th-THA language (or simply mkdir koha-tmpl/intranet-tmpl/prog/th-THA)
3) Reload page, wrong description
4) Apply patch
5) Install th-TH language (or simply mkdir koha-tmpl/intranet-tmpl/prog/th-TH)
6) Reload page, right description
7) If you want do "mkdir koha-tmpl/intranet-tmpl/prog/th-Thai", reload,
also right description
To the reporter of this Bug: the rename of the folder is a good
workaround, when this patch is pushed to stable I'll rename Thai
files
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
This does not correct existing problems which need human
intervention. It does, however, allow for a correct installation
of Thai after the patch is made.
If we really want a patch for fixing an existing install. I
wrote it, but have not tested it.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
As pointed out by Mark, this does not fix existing installations.
Putting a note in the release notes might be something we can do here.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 7934 breaks the -f option introduced in bug 9161; this patch
repairs the regression.
While the generation of the command tmpl_process3.pl, a space is
missing if the -x option is given.
The tmpl_process3.pl is called like:
/home/koha/src/misc/translator/tmpl_process3.pl -q update -i
/home/koha/src/koha-tmpl/intranet-tmpl/prog/en/ -s
/home/koha/src/misc/translator/po/fr-FR-i-staff-t-prog-v-3006000.po -r
-x 'help'-f pay.tt
Revised test plan:
1) cd ./misc/translator
2) put a warn at LangInstaller.pm line 375.
3) time ./translate update fr-FR -f pay.tt
-- note the execution time and the output. The options in the
command contain "-x 'help'-f pay.tt"
The -f param is not passed to the script.
The execution time is strangely long.
5) git reset --hard origin/master
6) apply this patch
7) put a warn at LangInstaller.pm line 375.
8) time ./translate update fr-FR -f pay.tt
-- verify the output and the execution time is now corrected.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
