Test plan:
1. Look at koha-tmpl/intranet-tmpl/prog/en/modules/circ/returns.tt
2. Note that it says 'Lost reserve'
3. Apply patch
4. Note that it says 'Lost hold'
Note:
I was not able to trigger the behaviour to see the text in question
Sponsored-by: Catalyst IT
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1. Inspect `koha-tmpl/intranet-tmpl/prog/en/modules/circ/returns.tt`, notice that on line 136 it says "Cancelled reserve"
2. Apply patch
3. Inspect the same line again and notice it now correctly says "Cancelled hold"
4. ???
5. Profit!
Sponsored-by: Catalyst IT
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In the Koha staff interface go to administration.
Go to TalkingTechItivaPhoneNotification. Enable this preference. Save.
Go to Tools > Overdue notice/status triggers
Check that ‘Phone (i-tiva)’ is an option for notice types.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch uses the existing format_price JS include to format prices in
the cashup summary modal
Test plan
1) Create some transactions and a cashup
2) View the cashup summary modal and confirm amounts are not nicely
formatted
3) Apply patch
4) Confirm amounts in cashup summary modals are now nicely formatted
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1. First step is to go to administration > then system preferences
2. Set unseenrenewal to "allow"
3. Go to administatrion > circulation and fines rule
4. Set unseenrenewals count to any number
5. Check out an item to a patron and go to the checkouts tab
6. Renew the item
7. Notice that the renewal messages have no seperation
8. Apply the patch
9. Notice there is now a "&" in the spacing between renewal messages
Sponsored-by: Catalyst IT
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Replace occurences of 'Notices & slips' with 'Notices and slips'
(replacing '&' and '&' with 'and'), as per the terminology
guidelines.
See the terminology list:
https://wiki.koha-community.org/wiki/Terminology
Test plan:
1. Find occurrences of 'Notices & slips':
- git grep 'Notices & slips' -- :^misc/translator/po
- git grep 'Notices & slips'
2. Review places in the staff interface where 'Messages & slips' is
displayed:
- Tools home page
- Tools > Notices & slips: page title and breadcrumb
- Other breadcrumbs:
. Tools > Notices & slips > New notice > [select any module]
. Tools > Notices & slips > [select Edit for any notice]
. Tools > Notices & slips > [select Delete for any notice]
3. Review other occurences:
. The cron job description for misc/cronjobs/holds/holds_reminder.pl:
misc/cronjobs/holds/holds_reminder.pl -man (scroll down to the
description)
. The TalkingTech README file:
vi misc/cronjobs/thirdparty/TalkingTech.README
4. Apply the patch.
5. Re-run the grep queries from step 1 - no occurences are now found.
6. Review places where 'Notices & slips' was found in steps 2 and 3 -
these should all be replaced with 'Notices and slips' and should
read correctly.
7. Sign off!
Alernative: review the diff for the patch and check that occurences of
'&' and '&' are replaced with 'and' and the updated text reads
correctly.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch just fixes a missing permission on the intranet main page. Currently, the Additional Content modules allows people to edit, modify or create new additional content just by checking if they have any tool permission at all, and not the right one.
To test:
1 - From the staff client, create a news article for the intranet.
2 - Create (or use) an additional staff patron, giving them the necessary permissions to access the intranet, but no tool permission.
3 - Using another browser (or incognito mode), log on the intranet page with your new staff account, you should be able to see the news content, but not edit or delete it. That's the expected behavior.
4 - From your main admin account, give your test account the edit_additional_contents permission.
5 - Your test account should now be able to edit/delete the news content. This is also expected behavior.
6 - Using the main account again, remove this time the edit_additional_contents but add any other subtool permission (edit_calendar is a good one for instance)
7 - Repeat step 5 and confirm that your test account can still edit or delete the news content. This shouldn't happen.
8 - Apply patch
9 - Repeat steps 4-6, and confirm that your test account can now only edit or delete news content if they have the edit_additional_contents permission enabled.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes a small typo at
koha-tmpl/intranet-tmpl/prog/en/modules/reserve/request.tt:574
To test:
1 - Set item-level_itypes in administrative preferences to
bibliographic record
2 - Navigate to /reserve/request.pl in admin interface
3 - Notice that the typo is there in hold details
4 - Apply Patch
5 - Typo is fixed
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch modifies the subscription entry form so that it will perform
a check on the staffdisplaycount and opacdisplaycount fields before
proceding to the second step. It verifies that the values are numeric.
The changes are made in the style of the existing form validation, which
should be rewritten to either use the validation plugin or to peform
checks in a way that all checks are run before warning the user.
However, this smaller change will work in the meantime.
To test, apply the patch and go to Serials -> New subscription.
- Fill out the form with at least the required fields, but put something
other than a number if the "Number of issues to display to staff" and
"Number of issues to display to the public" with non-numeric characters.
- When you click the "Next" button you should get an error message,
"Number of issues to display to staff must be a number."
- Correct the issues to display to staff field and submit again.
- You should get a different error message, "Number of issues to display
to the public must be a number."
- Correct this field and you should be able to proceed to the next step.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Go to MARC bibliographic framework, pick a framework and go to 952, subfield "o". Turn the cn_browser plugin on.
2. Pick or create an item in that framework, edit that item.
3. TO the right of the 952$o notice the "...". Click that start the call number browser.
4. Notice there is no column for collection.
5. Apply patch, restart_all
6. Notice there is now a column for with the items collection.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In input fields we always use the decimal . while the display format
uses the decimal separtor definded by CurrencyFormat. When adding a
manual invoice without this patch, the amount is shown with comma, but
it should be . in the input field.
To test:
1- Go in Administration->Debit types
2- Click on New debit type
3- Fill the form:
Code: USEDBOOK
Default amount: 0.50
Description: Used book
Can be manually invoiced: Yes
4- Save
5- Go to any patron account
6- Go to the "Accounting" tab
7- Click on "Create manual invoice"
8- Fill the form
9- Choose the created debit (Used book)
10- Verify that the format is incorrect (0,50 instead of 0.50)
11- Apply the patch
12- Verify the amount is now using the correct format
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Changes:
* branch to library
* staff client to staff interface
* adds an ending .
To test:
- Compare system preference descrpition before and after the
patch was applied.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Rename the issues.renewals field to renewals_count to prevent a method
name collision with the new relation accessor introduced by this
patchset.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Go to the admin page.
2. Search for the above preference.
3. Confirm that "Will" is now spelled correctly.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1 - Confirm 952$o is not linked to a plugin in the default marc framework
2 - Send some tiems to batch modification
3 - Confirm you can select RegEx as an option for callnumber during modification
4 - Link 952$o to the cn_browser.pl plugin
5 - Repeat batch modification
6 - Note there is no regex option
7 - Apply patch
8 - Confirm there is a regex option
9 - Unlink 952$o from plugin
10 - Confirm you still have a regex option in batch modification
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Several fixes :
- Replace tab with spaces
tag_210 :
- Class 'value' and not 'valeur'
- Loop on subfields must restrict to abcdg otherwise last() may not be
correct (ie 214r and 214s)
tag_214 :
- Condition for coma after b should be same as after a : "position() != last()"
tag_210 and tag_214 :
- Space before ':' like in other fields
- ':' before c or g does not exist in opac, removed from intranet file
- Search links in intranet fixed (where composed with opac-search ^^)
- Search links using 'str:encode-uri' like other places
- Simplify title attribute with only 'Search for publisher' => Bad idea
to use double quotes in a text
tag_214_s and tag_214_r :
- Loop on field+subfield otherwise last() may not be correct
I've fixed intranet and copied to OPAC (only adapted search links)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomás Cohen Arazi <tomascohen@theke.io>
test plan :
- Apply patch
- Find a record with a B214
- Check on both Opac-Details and Opac-Result that the field is
displayed.
- Do the same checks on catalogue/search results and catalogue/details
in Staff interface.
- Add a 210 field to the record (legacy)
- It should be displayed as well
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomás Cohen Arazi <tomascohen@theke.io>
This patch changes the name and description of the QOTD tool in order
to make them more consistent with the other tool names and descriptions.
To test:
1) Go to Tools
2) Read the QOTD tool name and description, make sure they make
sense and that there are no typos
3) Test the link to make sure it goes to the tool
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomás Cohen Arazi <tomascohen@theke.io>
This enhancement changes recall fulfillment actions to log with the
FILL action. It will also update existing recalls FULFILL actions in
the database to use the FILL action.
To test:
1) Enable the UseRecalls system preference and set up your
recalls-related circulation rules. Confirm RecallsLog is enabled.
2) Check out an item to Patron B.
3) Log into the OPAC as Patron A and search for the item.
4) Place a recall on that item.
5) Go back to the staff client and check the item in. Confirm the recall
as waiting for Patron A.
6) Check out the item for Patron A to fill the recall.
7) Go to Tools -> Log Viewer. Confirm there is a FULFILL action. Choose
the following search params to browse system logs:
- modules: recalls
- actions: fill
8) Submit the search and confirm the recall DOES NOT show.
9) Apply the patch, update database, restart services.
10) Refresh the log viewer and repeat step 7. Submit the search and
confirm the recall DOES show. Confirm there is no longer a FULFILL
action as both holds and recalls will use FILL.
11) Check in the item.
12) Repeat steps 2-6. We are ensuring that future recalls are logged
using the FILL action.
13) Repeat step 7. Confirm all test recalls are now showing in search
results.
Sponsored-by: Catalyst IT
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This is another fix for a bug in return claims. We now test for the
initialised datatable and call an ajax reload directly on it if we find
one instead of calling a undefined function (the function is out of
scope here).
NOTE: Taken as a whole commit follow-up on bug 28854 where the issue was
initially identified
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The return claims table was stringifying 'null'. This patch updates the
code to check for definition so we don't stringify incorrectly
Note: This patch was split out from a follow-up on bug 28854 as we felt
it should be treated separately for backportability.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a view page for libraries, so that the user isn't
required to edit the library to see information about it.
To test, apply the patch and log into Koha as a user with permission to
manage libraries.
- In the list of libraries you should see that the library name in the
first column is now a link.
- When you click the link you should be taken to a view of all the
information about the library.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch modifies the reports interface to change the reports toolbar
in two ways:
1. The Edit, Duplicate, and Delete buttons are now combined into a
button menu. My original idea was to have it be a split button, but
the logic for handling various permissions made the template logic
too convoluted.
2. The "Show SQL code" button is converted to a "Single toggle" button
(https://getbootstrap.com/docs/3.3/javascript/#buttons-single-toggle).
This type of button is specifically designed for this kind of
interface element.
This patch includes indendation changes, so please diff accordingly.
To test, apply the patch and go to Reports -> Saved reports.
- Logged in as a user with Create and Delete report
permissions:
- View an SQL report. In the toolbar you should see an "Edit" button
menu with three options: Edit, Duplicate, and Delete. Check that all
work correctly, including a deletion JavaScript confirmation dialog.
- Logged in as a user with Create but not Delete report permissions, you
should see an "Edit" button menu with two choices: Edit and Duplicate.
- Logged in as a user with Delete but not Create report permission (??)
you should see only a standalone delete button.
- Logged in as a user with Execute report permission, run an SQL report.
Test the "Show SQL code" button. The text should change to "Hide SQL
code" and the button should be styled to look like its "pressed"
state.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It looks like during one of the many rebases we lost some of the tabn
handling, likely due to the conversion from jquery-ui to bootstrap tabs.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The C4::Suggestions::SearchSuggestion subroutine is badly written and
can be replaced by calls to Koha::Suggestions->search.
The hard part in this patch is suggestion.pl, the other occurrences have
been replaced easily.
Test plan:
The idea is to test the whole suggestion workflow.
1. Create a suggestion on OPAC
2. Create a suggestion on the staff interface
3. Edit suggestions
4. Filter suggestions (use the different filters and "organize by"
values)
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 23991: Remove SearchSuggestion tests
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 23991: (QA follow-up) Save some DB queries
This patch makes the suggestion-related pages rely on array size instead
of querying the DB each time they need to. In the case of
suggestion/suggestion.pl it goes from 4 COUNT(*) to 1.
To test, with KTD:
1. Run on the host machine:
$ docker exec -ti koha_db_1 bash
$ mysql -ppassword
> SET GLOBAL general_log_file='/var/log/mysql/mycustom.log';
> SET GLOBAL log_output = 'FILE';
> SET GLOBAL general_log = 'ON';
> \q
$ tail -f /var/log/mysql/mycustom.log | grep suggestions
2. Visit the different pages changed on this bug
=> SUCCESS: Some queries
3. Apply this patch
4. Repeat 2
=> SUCCESS: Less queries!
5. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 23991: Fix branchcode and budgetid filtering
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 23991: Fix conflict with bug 28941
Well, this patchset fixed the security bug...
Redoing on top of bug 28941
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 23991: (follow-up) Missing semicolon
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 23991: Fix 'all' libraries
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 23991: (follow-up) Add value to filter_archived
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds two new sysprefs:
ComponentSortField
ComponentSortOrder
These allow the user to choose how components should be sorted when displaying on the details page
of a record, and the corresponding search for all components
This also updates our search from simple_search_compat to search_compat to allow for sorting options
Note:
Some sorting under ES is unclear - this is a separate issue to be invesitgated
Our Zebra index does not offer 'record number' sorting, I will file a bug for that
To test:
1 - Enable UseControlNumber (or not)
2 - Add some components to a record by control number or title depending on above
3 - Enable ShowComponentRecords syspref
4 - View the record that has components
5 - Note they are not sorted
6 - Apply patch, updatedatabase
7 - reload record
8 - Note components are sorted by title ascending
9 - Try different values for ComponentSortField and ComponentSortOrder
10 - Confirm sorting changes with system preferences
11 - Repeat test on staff and opac, with ES and Zebra search engines
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates some language in the inventory template to make it
readable and consistent: Punctuation fixed, capitalization made more
consistent, language corrections ("check in" instead of "return").
To test you can try to apply the patch and trigger the various errors in
the inventory interface, but it's probably enough to visually confirm
the changes in the patch.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The construct of [% ELSE %]0[% END %] breaks translations as it is
translated as [% ELSE %][% END %]. Note: No 0 in the ELSE statement.
This patchset either removes occurances of a lone 0 in template ELSE
statements, or splits it over multiple lines so the 0 is not removed in
the translated templates.
Test plan:
1. Install the en-NZ translation
2. Search the translated templates for '[% ELSE %][% END %]' and confirm
there are are instances of that
3. Apply patch
4. Update your en-NZ translation
5. Repeat step 2 and confirm there are no more instances of [% ELSE %][%
END %] in the translated templates
Note: I removed the [% ELSE %] statement from opac-bottom.inc as that
statement was empty in the en translation so it didn't look to be
needed.
Sponsored-by: Catalyst IT, New Zealand
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the field classes introduced in this patchset to
improve class name consistency. We remove the _field apendment and to
repvent a clash we update the existing 'renewals' class elsewhere to
'renewals-info' to more clearly reflect it's content.
Test plan
1) The patchset should continue to function as described in prior patches
2) Build the CSS for the staff client
3) Check the 'Checkouts' table on various screens and confirm the
renewals information still displays as it always has in the table.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1 - Apply patch, restart all
2 - View a record with items in the staff client
3 - Note issues and renewals columns not shown
4 - Click the gear to edit visible columns
5 - Issues and renewals are present and hidden
6 - Click to view columns
7 - Confirm counts show, or 0 if item has not circulated/been renewed
8 - Circulate/renew an item
9 - Verify counts increase
10 - Make columns visible by default in Admin->Table settings
11 - Confirm columns show by default on details page
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds comments to the template to highlight the markup
structure.
This patch should have no effect on the page's appearance or
functionality.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the authority detail template so that indentation is
consistent.
To test, apply the patch and go to Authorities.
- Locate an authority record and view the detail page.
- Everything should look correct, with working numbered tabs.
- If the AuthDisplayHierarchy preference is enabled, you should see a
collapsible tree of elements in the authority hierarchy.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Trying to make it clearer that's either none or 2 buttons.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To Test:
1. Apply patch, updatedatabase, and restart_all
2. A small change the global scss file means you should regenerate the CSS as well. ( https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_interface )
3. Set DisplayClearScreenButton to "don't show"
4. Go to the patron checkout screen and see that no button should show to clear the screen and print
5. Set DisplayClearScreenButton to 'ISSUESLIP' and make sure the button now appears and the ISSUESLIP prints
6. Set DisplayClearScreenButton to 'ISSUEQSLIP' and make sure the button now appears and the ISSUEQSLIP prints
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds comments to the template to highlight the markup
structure.
This patch should have no effect on the page's appearance or
functionality.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the serial claims template so that the indentation
is consistent. Tabs are replaced with spaces.
To test you must have at least one subscription with late issues.
- Apply the patch and go to Serials -> Claims and select the vendor
responsible for your late issue.
- On the "Missing issues" page, confirm that everything looks correct.
- All functionality should be the same: Filters, table sorting, CSV
export, and claim notification.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the "autofocus" attribute to the keyword field in the
popup window used to find a bibliographic record to use in a
subscription.
The same is also done for the vendor search popup.
To test, apply the patch and go to Serials -> New subscription.
- Click the "Search for vendor" link. When the "Serial subscription:
search for vendor" window opens the cursor should automatically be in
the vendor search field.
- Click the "Search for record" link. When the "Catalog search" window
opens the cursor focus should automatically be in the keyword field.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Apply patch and restart everything
2. Go to Tools > News and create some new additional content.
3. Notice a Save and continue button
4. Try saving and contining.
5. Make sure if you are using the CodeMirror editor that you are still in the CodeMirror editor
6. Try 2 - 5 again but with the wysiwyg editor, make sure when you save and continue you remain in the wysiwyg editor.
7. If you are saving and contining from News make sure you remain in News, when you are saving and contining from HTML customizations make sure you remain there.
8. Turn on the NewsLog system preference
9. With the NewsLog on make sure your content is being logged correctly when you sabe and continue.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This is the same as preevious patch, but for advanced cataloging editor
To test:
1 - Enable EnableAdvancedCatalogingEditor
2 - Create a new record in advanced edtior
3 - Hover over leader6 and 008 type
4 - Confirm notes are useful
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch simply adds title elements or clarifies existing title elements to indicate how default
values are chosen
To test:
1 - Create new record in default editor
2 - Open leader helper, hover over "6-Type of record" and the dropdown
3 - Confirm notes make sense
4 - Open 008 helper
5 - Hover over 'Type of Material' and dropdown
6 - Confirm notes make sense
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We not longer need to pass holdfor_cardnumber distinctly, we can just
refer to holdfor_patron.cardnumber instead. This patch does that ;P
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch update the catalogue search results page to use the
patron-title include to display patron titles for the 'Holds for' line
in results and dropdown list.
Test plan
1) Load patron account
2) Press search to hold
3) Perform a search which brings back 2+ items (e.g. 'street')
4) Note that on the search results it says: Place hold for 'firstname
(othername) surname (cardnumber)'
5) Press the Place hold button and note that the dropdown includes
"Place hold for 'firstname (othername) surname'" and "Forget
'firstname (othername) surname'"
6) Click through to an item from the results, press the 'Place hold'
button and note the dropdown includes "Place hold for 'firstname
(othername) surname'"
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates all manual accurences of the patron title display
to use the patron-title.inc include (so we get middlename handling)
in request.tt.
We also add the option to hide the cardnumber from the include and set
the link_to to 'members_pay' to retain the current display format on
this page.
Test plan
You'll need to trigger the following cases to test all cases:
1) Too many holds
2) Account expired
3) Has restrictions
4) Outstanding fines
5) Already has hold on item
6) No holds allowed
7) Too many holds for this record
8) Already in possession
9) Already has a hold
10) Already has a recall
11) Pickup library doesn't many patron home library
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the new 'Middle name' field to the patron record.
To test:
1) Apply patches
2) Update database, restart all and clear the browser cache
3) Load a patron in the staff module
4) Confirm you can see and edit the new 'Middle name' field
5) Confirm the new middle name data displays on patron details
6) Confirm the new middle name data displays on patron search results
7) Confirm the new middle name data displays everywhere patron names are
displayed.
8) Confirm the new middle name data displays on the OPAC
9) Confirm the 'Middle name' field appears in the OPAC borrower
modification screens
10) Edit sysprefs `BorrowerMandatoryFields`, `BorrowerUnwantedFields`,
`SelfModificationBorrowerUnwantedField`, `PatronSelfModificationMandatoryField`,
`PatronSelfRegistrationBorrowerMandatoryField` and
`PatronSelfRegistrationBorrowerUnwantedField` to confirm you can make
the new field required or hidden.
11) Verify that DefaultPatronSearchFields contains the new field if you
already had 'firstname' in the field list
12) Enable PatronAutoComplete system preference
13) Type patrons surname into checkout or patron search but don't hit
return
14) Confirm the patrons middle name is displayed in the preview
15) Go to tools > patron lists and attempt to add a patron to a list
16) Patrons middle name should appear in the autocomplete here too
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
See comment #1.
Signed-off-by: Roch D'Amour <roch.damour@inlibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1) Apply patch
2) Go to Home -> Patrons -> Patron details (for any patron)
3) Create manual invoice for the patron
4) Pay fines -> Pay -button
5) Check that the currency values look correct
6) Pay fines -> Pay amount -button
7) Check that the currency values look correct
8) Pay fines -> Pay selected -button
9) Check that the currency values look correct
10) Change the CurrencyFormat setting
11) Repeat 2-9
Signed-off-by: Pasi Kallinen <pasi.kallinen@joensuu.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch offers an alternate take on using Font Awesome icons on the
holds page in place of images as links.
This revised patch updates the icon implementation so that it is easier
to override the Font Awesome icon selection with CSS. Test by adding the
contents of this file to the IntranetUserCSS preference:
https://gitlab.com/-/snippets/2319364
To test:
1 - Place some holds on a record
2 - View the 'Holds' tab in the staff interface
3 - Note the new icons
4 - Note their hover test
5 - Confirm the buttons still work as expected
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
No longer used since
commit de2d8ba3e4
Bug 30011: Update links to jQueryUI assets, remove datepicker references, etc.
We must remove it from our codebase.
Test plan:
git grep timepicker.inc
Should not return occurrences outside of PO's
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This adds a new field "Can be guarantee" to patron categories so it
becomes possible for any category type to have a guarantor.
To test:
1) Have a patron category of type 'Adult' and one of type 'Child'
2) Confirm, by searching for the "Patron guarantor" fieldset in the
edit/create form, that:
=> a patron of the first category can't have a guarantor
=> a patron from the second category can
3) Apply patch and run updatedatabase.pl
4) Edit the categories and note the new "Can be guarantee" field
5) It should have been set to "yes" for the "Child" and to "no" for
the "Adult"
5) Repeat step 2. It should behave in the same way.
6) Edit the "Can be guarantee" for any of the category and check
that the fieldset only appears when "Can be guarantee" is set to "yes"
7) prove t/db_dependent/Patrons.t
=> tests should still pass
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
There is an existing pattern for the 'Note:' in pref
descriptions, where it's always added on a new line.
This changes the formatting to match that pattern.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The additional materials check when CircConfirmParts is enabled was
errantly relying upon the 'FORCE_CHECKOUT' permission. This patch
updates the template to allow confirmation as well as cancellation of
chekout.
Test plan
1. Set a staff member with circ permissions, but not FORCE_CHECKOUT
2. Turn on CircConfirmItemParts
3. Log in as staff member in step 1
4. Attempt to checkout an item with a 952$3
5. The only option given is the Continue button (with a red X) and when
clicked, the item does not get checked out.
6. Apply patch
7. Repeat step 4.
8. You should now have the option to 'Yes, check out (Y)' or
'No, don't check out (N)'
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This applies the same fix as the first patch but to the staff
interface detail page. With this fix, a tag like +++ can
be clicked and the tagged records will show.
To test:
- Tag some records in the staff interface with something like +++
- Go to the detail page of one of those recods
- Click on the tag
- Verify nothing is found
- Apply patch
- Repeat - all tagged records will show
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It's possible to place item-level hold without selecting a pick-up
location, which causes problems: if the item is then returned,
Koha tells about a hold, but gives error 500.
At patron's hold tab you see the number of holds, but cannot see the
actual holds there. However, if you go to the title in question,
then modify the hold so that it has a pick-up location,
then the hold will work normally again.
This patch fixes already existing but not working JS error message and
ensures that hold cannot be made while pickup location is undefined.
To reproduce:
1. Go to admin page, to the libraries configurations, and disable
pickup location for one of them.
2. Pick any biblio that has items that have that same library as a
default pickup location.
3. When placing the item-level hold, notice that the pickup location
dropdown box is empty by default. Keep it empty, place the hold.
4. Go to the patron's page of the patron who you placed that hold for,
check that it doesn't show the new hold.
5. Apply patch.
6. Repeat steps 2 and 3, it shouldn't let you make the item-level hold
until you select a specific pickup location.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 26145 added the ability to add local cover images to items.
If SeparateHoldings is set, items from other libraries are displayed in
a separate tab, and not considered as visible. We have a JS test to
assume that images not shown are not present, this only apply for the
images for the bibliographic record, as they can come from different
sources.
Test plan:
Turn on LocalCoverImages and SeparateHoldings
Create a record with different items coming from different libraries
Attach images to items and to the biblio
Notice that with this patch you can see the images from the "Other
holdings" tab
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In bug 28959 category was replaced in favor of public. But
unfortunately a few places were missed.
This fixes the addbybiblionumber templates.
Test plan:
Add a biblio to a list from the search results using the Add to
or Add to list button on OPAC/intranet.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Apply this patch
2. Go to /cgi-bin/koha/acqui/acqui-home.pl
3. The columns button should be restored, make sure you can hide/show columns correctly.
4. Go to Table settings and make sure you can hide columns properly by default.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
They need more complex solutions that would be better in a follow up ticket
to not drag this one too long.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To be sure translators don't think it's wrong and translate it plurally.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Due to conditions. Things like "Edit batch" need to be keept in one
strings.
Also removed some capitalization because it wasn't needed and wasn't
consistend with <title> and <h1> which had now capitalization.
Also fixed patron edit-batch.tt and edit-layout.tt because they were
incomplete in regard to their label counterparts. They had the condition
on description and batch_id but weren't displaying anything different
between the two cases.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In the 1st patch, sometimes they where left out
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
And a few minor fixes when they where causing issues for
translatability.
And rephrased a string about password reset to have it identical to
other strings with the same meaning.
Simplified via wrapping strings with <span> to split to huge
concatenated strings with a lot of %s everywhere.
== Test plan ==
This patch needs mainly proof reading. Still it's possible to do some
basic testing to demonstrate that adding a <span> in an IF doesn't
break anything.
Pick in one of the 110 modified templates a string that you know how to
display. Otherwise:
1. acquisitions => vendor => basket => add to basket =>
search "from existing record" => add order
2. Cancel the order
3. You see without issue "Bibliographic record will not be deleted"
4. administration => Patron categories
5. Try to delete a used and unused category
6. You see as expected
Category XXXX is in use. Deletion not possible!
and
Confirm deletion of category XXXX
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
includes/background_jobs_update_elastic_index.inc
vs
includes/background_jobs/update_elastic_index.inc
Both exist and have been added by bug 27344.
The first one is not used.
Test plan:
git grep background_jobs_update_elastic_index.inc
must not return any occurrences (outside of POs)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The serials search page serials/serials-search.pl has HTML body id :
<body id="ser_serials-home" class="ser">
It is the same as serials home page.
This patch replaces with id="ser_serials-search"
Test plan :
1) Go to Serials > Advanced search
2) Look at HTML code
3) Check you see <body id="ser_serials-search" class="ser">
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch addresses the itemnumber and biblionumber attributes for
recalls having been renamed.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds course name to the breadcrumbs and page title on the
pages for adding items to a course.
To test, apply the patch and go to course reserves.
- Click a course to view it.
- Click the "Add reserves" button.
- In the breadcrumbs you should see:
Home > Course reserves > [Course name] > Add reserves
- [Course name] should link correctly to the course detail view. In the
page title you should see:
Add reserves > [Course name] > Course reserves > Home
- Enter a barcode or biblionumber and proceed to the next step. Confirm
that the same changes are in effect on the second page.
- Perform the same tests in the "Batch add reserves" process.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Barcode is trimmed of leading/trailing whitespaces in many instances
before the barcodedecode sub was called. This patch instead makes that
barcodedecode sub is going to trim it itself and removes unnecessary,
and repetitive code that was used before barcodedecode was called.
Steps to test:
1. Edit item with any barcode, add a bunch of whitespaces at the start
and at the bottom of it. Save the item. Ensure that this action ruins
the barcode and ensure that the spaces are still there by editing the
same item again.
2. Apply the patch.
3. Edit the same item again in the same fashion. Ensure that now all
whitespaces are getting trimmed and it doesn't affect the barcode in
any negative way.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Modifying an existing element of additional content (News) by changing
the library causes a duplication of the entry on the Additional contents
(News) list. A subsequent attempt of deleting one of the entries results
in deleting both of them. This is due to the fact that after
the unwanted duplication all the entries share the same
additional_contents.code.
Test plan
=========
1. Create a piece of news under Tools > News.
2. After having saved it make a modification by changing the library.
It should result in two rows in the table.
3. Delete one of the lines with Delete button. Both lines will
disappear.
4. Apply the patch.
5. Repeat the steps 1 and 2. Only the one (the modified) entry should be
present in the table.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This attribute name was changed to *item_level* but this two remaining
places kept calling it with the old name.
To test, verify things don't explode when looking at checkouts with
recalls and also in the log viewer.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Change of text from "pin" to "PIN" in the 2FA setup interface.
This slight changes clarifies that "PIN" is an acronym,
and increases user comprehension
To test:
1) Log in as an Administrator
2) Enable TwoFactorAuthentication
3) Log in to a user with superlibrarian permissions.
4) On the user profile page, click the "More" dropdown button,
click "Manage Two-Factor
5) Check that "pin" is displayed in lowercase, in both instances.
6) Apply patch.
7) Refresh the page and observe that "pin" has changed to "PIN"
8) Sign off.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes an extra point after the number of shown results.
Test plan :
- don't apply patch
- run a report that brings you more than 20 results, e.g. SELECT * FROM biblio LIMIT 50
- see extra ' .' after the number of shown results
- apply patch
- run the report again and see the point isn't displayed anymore
- check the behaviour is still correct when you change the number of rows displayed
- sign off !
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Replace Display/Don't display (and some other pairs) by Show/Don't show in system preferences.
Test plan:
1- Go to administration > system preferences
2- View any system preference with Display/Don't display pair of options
(e.g. OPACAcquisitionDetails)
3- Apply the patch
4- Refresh the page and notice it is now a Show/Don't show pair instead
5- Loop the steps with other system preferences until satisfied
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the member-flags template to use the patron-title.inc
include wherever patron names are referenced.
Test plan
1) Navigate to a patron and click through to their accounts tab
2) Note how the patron name displays in the title, breadcrumb and
headings
3) Click through to make a payment
4) Note how the patron name displays in the title, breadcrumb and
headings
5) Apply the patch and reload the page
6) Confirm the patron name still appears in each location and is
consistently formatted and linked as you would expect
Note: This patch also removes a superflous hidden title form element
that was simply passed to and from the controller but not actually used
in any way.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the member-flags template to use the patron-title.inc
include wherever patron names are referenced.
Test plan
1) Navigate to a patron and click through to edit their permissions
2) Note how the patron name displays in the title, breadcrump and
headings
3) Apply the patch and reload the page
4) Confirm the patron name still appears in each location and is
consistently formatted and linked as you would expect
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The feature is not experimental at all.
To test:
1. Search for the RESTOAuth2ClientCredentials syspref
=> FAIL: It says it is an experimental feature
2. Apply this patch and reload
3. Repeat 1
=> SUCCESS: No longer marked as experimental
4. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the basket groups interface so that it doesn't rely
on YUI to move baskets in and out of groups. The patch also removes
all YUI assets and many long-obsolete references to YUI-related classes
and IDs.
To test, apply the patch and rebuild the staff interface CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client)
- Go to Acquisitions.
- Locate a vendor with multiple closed baskets.
- Click "Basket groups" in the sidebar menu.
- Create or edit a basket group.
- On the basket group page you should see the basket group form in one
column and ungrouped baskets in another.
- Both grouped and ungrouped baskets should be in a sortable
DataTable.
- Test that when you click the "Add to group" button on an ungrouped
basket the row is removed from the table of ungrouped baskets and
added to the table of grouped baskets.
- The button text on the row should now read "Remove."
- Test the reverse operation: Clicking "Remove" on a grouped basket
should move it to the table of ungrouped baskets.
- Test that when all baskets are moved out of either of the tables a row
is displayed with a message specific to that table, e.g. "There are no
ungrouped baskets."
- Test that the basket group saves correctly when zero or more baskets
are added to the group.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves the not-generic virtualshelf-related exceptions to
their own file. Callers are adjusted as required.
To test:
1. Run:
$ kshell
k$ prove t/db_dependent/Virtualshelves.t
=> SUCCESS: Tests pass
2. Apply this patch
3. Repeat 1
=> SUCCESS: Tests pass
4. Check virtualshelves work as expected
5. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Adds a similar check to the patron details shown when selecting
the details tab in the patron account in the staff interface.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It appears that in my original submission ( Bug 9021 ),
I hid the SMS provider selector unless the SMS::Send
driver was set to "Email", but only on the OPAC,
not on the staff interface!
Test Plan:
1) Set SMSSendDriver to anything except "Email"
2) Note the SMS Provider pulldown shows in the patron editor
3) Apply this patch
4) Reload the page, SMS Provider id should now be gone
5) Set SMSSendDriver to "Email"
6) Reload the page, SMS Provider should now be shown
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes a few markup errors in the addorder2709 template. The
modal dialog markup is corrected and moved out of the loop of records so
that it doesn't create repeating id attributes. Obsolete CSS is removed,
fixing the width of the MARC preview modal.
The calendar include is added, fixing a Flatpickr error in the console.
Double ID attributes are removed from the Statistics 1 and Statistics 2
fields.
To test, apply the patch and test the process of adding an order to a
basket from a staged MARC file. Test in particular:
- The MARC and Card previews
- The "Date acquired" field under the "Item information" tab should
trigger a Flatpickr widget.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds comments to the template to highlight the markup
structure.
This patch should have no effect on the page's appearance or
functionality.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the template for ordering from a MARC file so that
the indentation is consistent.
This patch does not fix a couple of bugs which will be fixed in a later
patch: The MARC modal window has the wrong width, and there is a
Flatpickr error in the console.
To test apply the patch and go to Acquisitions -> Vendor -> Basket ->
Add to basket -> From a staged file.
- Click "Add orders" next to the staged file you want to use.
- On the "Add orders" page, test that everything still works correctly:
- Tabs work correctly
- JavaScript controls (select all, show inactive, etc.) work
- MARC and Card previews work
- Adding orders works
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Just modifying the hint provided in patrons' messaging preferences to
allow either + or 00 for international formats.
No test plan needed.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When registering a phone number for SMS alerts, the number goes through
a regex filter to make sure the number is valid. One of the formats used
in Europe is 00 AAA XXXXXXXXX (A = country indicator) and it is not
supported.
This patch adjusts the regex to either accept 00 AAA XXXXXXXXX or
+AAAXXXXXXXXX in this case. (Note : +AAA and 00AAA are mutually exclusive).
To test:
1) You need to have installed a SMSAlert plugin. Make sure the
SMSSendDriver syspref is also set up with your SMS plugin of choice.
2) Pick a patron and edit its profile.
3) In the messaging preferences fieldset, under SMS number, enter any
number with the format 00 AAA XXXXXXXXX (ie : 00111123456789).
Try to save the modification : you should have an error message.
4) Try instead a number with the format +AAAXXXXXXXXX (ie :
111123456789), that one should be accepted.
5) Save your modification then check that the number has been changed.
6) Apply patch.
7) Repeat step 3 to 5.
8) Observe the error is gone.
9) Try it once more with the format +00 AAA XXXXXXXXX (+00111123456789),
that format should not be accepted: this is intentional.
10) Sign off.
Thanks-to: Didier Gautheron <didier.gautheron@biblibre.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds to the configuration of the date of birth field in the
patron entry form so that the calendar widget prohibits the selection of
a date in the future.
To test, apply the patch and open a patron record for editing. Try to
select a birth date in the future using the calendar widget. You should
be limited to a selection of today or before.
Confirm that clicking the "Yesterday" and "Today" shortcuts in the
calendar widget works correctly.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When creating a patron category or editing an existing one, there is no validation for the "Password expiration" field.
If letters or other characters are entered, there is no error message and if not a number whatever is entered is not saved.
To test:
1. Go to Administration > Patrons and circulation > Patron categories.
2. Add a new patron category (or edit an existing category).
3. For the "Password expiration" field, enter letters or characters such as L$%.
=> Note that you are prompted to "Please enter only digits"
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Go to "Patrons with no checkouts" report, /cgi-bin/koha/reports/borrowers_out.pl
Select "Yesterday"
=> it automatically selects the previous day's date and populates the form field
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
On the staff side behaviour differs for default pickup location when placing a hold or
placing an overridden hold. Additionally, the behaviour has changed betwee master and stables
We should provide a consistent default, and allow the library to specify their choice
Note this only affects staff client as there is only a single dropdown on OPAC and it is not
tied to items
To test:
1 - Apply patch
2 - Update database
3 - Find a record with items from various branches, and at least one with a different home/holding branch
4 - Ensure there is an item that requires override to hold, and AllowHoldPolicyOverride is enabled
4 - Attempt to place hold
5 - Confirm all dropdowns default to logged in library
6 - Set DefaultHoldPickupLocation to item's home branch
7 - Refresh and confirm all dropdowns match item home library except biblio level hold - still logged in library
8 - Set DefaultHoldPickupLocation to item's holding branch
9 - Refresh and confirm defaults
10 - Mark one of the items holding library as 'not a pickup location' in Admin->Libraries
11 - Refresh and confirm dropdown is now empty for that item
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
borrower_data does not contain the borrowernumber, it is sent
separately.
Test plan:
1. Edit a patron record (for example: Henry Acevedo).
2. Note that the URL is http://127.0.0.1:8081/cgi-bin/koha/members/memberentry.pl?op=modify&destination=circ&borrowernumber=19
3. Change date of birth to yesterday.
4. Save.
5. Error message displayed above the Save and Cancel buttons:
The following fields are wrong. Please fix them.
- Patron's age is incorrect for their category. Ages allowed are 18-999.
6. Note that the URL is now http://127.0.0.1:8081/cgi-bin/koha/members/memberentry.pl
7. Fix date of birth (for example: change year to 2000).
8. Select Save.
=> Without this patch you get: "Patron not found. Return to search."
=> With this patch applied the patron's data is saved
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To reproduce:
1. Go to /tools/modborrowers.pl and fill form Card number list with data and click Continue.
2. It should give "No patron card numbers or borrowernumbers given." warning.
3. Using the browser inspector tool see that post fields cardnumberlist or borrowernumberlist
is sent with empty data.
Apply the patch, and then:
1. Fill form Card number or Borrowernumber list and click Continue.
2. Get the result: table with patrons for editing or warning about not found number.
3. Using the inspector tool see that request has data from the active tab in the form.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Try placing hold
2. Everything seems to work but no hold gets placed.
3. Apply patch
4. Verify holds are no placed correctly.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This page does not pull the recall columns correctly.
To test:
1) Enable the UseRecalls system preference and set up your
recalls-related circulation rules.
2) Check out an item to Patron B.
3) Log into the OPAC as Patron A and search for the item.
4) Place an item-level recall on that item.
5) Go back to the staff interface and search for the item. Confirm that when you go
to the record detail page, it explodes and errors are shown.
6) Apply patch and refresh page.
7) Confirm page loads as expected.
8) Check the Status information for the item in the Holdings table.
Confirm it shows the recall information correctly.
9) Check in the item and confirm the recall as waiting for Patron A.
10) Go back to the record detail page and confirm the Status information
for the item shows as Waiting in the Holdings table.
Sponsored-by: Catalyst IT
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. In Acquisitions make a basket and add something "From an external source"
2. Search for a title and click on the 'MARC' button, make sure the MARC prview is both tall and wide.
3. You will not see the horizontal scroll bar unless you scroll all the way to the bottom of the preview.
4. Apply patch.
5. Try steps 1 & 2 again, this time you should see the horizontal scroll bar as soon as the MARC prveiw loads.
Note: I put the CSS on multiple lines for better readability
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch renames the route to make it consistent for future additions.
To test:
1. Run
$ git grep 'matches/chosen'
=> FAIL: all occurences use /api/v1/import/
2. Apply this patch
3. Run:
$ git grep 'matches/chosen'
=> SUCCESS: All occurences have '/api/v1/import_batches/'
4. Run:
$ kshell
k$ prove t/db_dependent/api/v1/import_record_matches.t
=> SUCCESS: Tests pass!
5. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch uses the url parameter we created in 23475 to determine whether
we should populate the search bar or not
Note - a bookmark with this param will still populate search term with last search
To test:
1 - Search staff client for 'cat'
2 - Browse to a patrons checkouts and click on a title, or just go directly to a details page:
http://localhost:8081/cgi-bin/koha/catalogue/detail.pl?biblionumber=2850
3 - Search bar says 'cat'
4 - Apply patch
5 - Repeat 1-2
6 - Search bar is not populated
7 - Search "dalek war box set" or a term that finds a single record in your instance
8 - Search bar is populated
9 - Note url like: http://localhost:8081/cgi-bin/koha/catalogue/detail.pl?biblionumber=2850&found1=1
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This is to be consistent with what is done in checkouts.js
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1. Create a biblio without title, then create an item for this biblio.
2. Place a hold on it.
3. Go to the patron detail page and click on the Holds tab
4. Confirm that holds are correctly displayed
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
== Test plan ==
1. Go to http://localhost:8081/cgi-bin/koha/patroncards/manage.pl?card_element=layout
2. See that the page title in your browser window title is wrong because it contains <span>
3. Go to http://localhost:8081/cgi-bin/koha/labels/label-manage.pl?label_element=batch
4. See that the page title in your browser window title is wrong because it contains <span>
5. Go to http://localhost:8081/cgi-bin/koha/admin/aqbudgetperiods.pl
6. Administration => Budgets => Click on a budget => planning => plan by months
7. See that the page title in your browser window title is wrong because it contains <span>
8. Refresh the pages and see that the titles are correct
9. Sign off :)
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This fixes the capitalization in the descriptions for the
AdvancedSearchTypes and OpacAdvancedSearchTypes system preferences.
Test plan:
1. In the staff interface, search the system preferences for
'AdvancedSearch'.
2. Review the current descriptions for the AdvancedSearchTypes and
OpacAdvancedSearchTypes system preferences.
3. Note that "..Shelving Location.." is used instead of "..Shelving
location..".
4. Apply the patch.
5. Refresh the page.
6. Sentence case is now used for "Shelving location" in the
descriptions (as per coding guideline HTML4: Upper and lower cases
in strings).
7. Sign off.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1) Grep for placerequest.pl in the source code and check that
request.tt is the only place where the type parameter is passed.
Signed-off-by: David Nind <david@davidnind.com>
JD amended patch: adjust commit title
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes an out of place "i" and replaces it with a space. The
patch also removes obsolete CDATA markers in the page's JavaScript.
To test, apply the patch and go to Course reserves.
- Create a course if necessary, then view the details of your course.
- Click the "Add reserves" button.
- Enter a barcode or biblionumber.
- On the next page, the heading "Reserve [title] for [course]" should
look correct, with no extra "i" at the beginning of the line.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
There were several templates where we were still using the term
"reserve" instead of "hold." This patch corrects the ones I found,
including in a couple of HTML comments.
To test, apply the patch and confirm that the changes look correct and
affect only the relevant term.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch changes the word 'langues' to 'languages' in the description
of the following system preferences:
- OPACXSLTDetailsDisplay
- OPACXSLTListsDisplay
- OPACXSLTResultsDisplay
- XSLTDetailsDisplay
- XSLTListsDisplay
- XSLTResultsDisplay
To test:
1- Apply patch
2- Check the aforementioned system preferences and make sure the descriptions say 'languages'
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Currently place request gets a list of bad_bibs that is created via javascript on the
template. It ignores this list
Ths patch instead doesn't add info for bad bibs, and provides a list of the bibs that
can be held
To test:
1 - Attempt multi hold with some items that can be held, and one that cannot due to notforloan
2 - Fill in pickup locations and place hold
3 - Note hold is place on bib with no avilable items and hsows twice in results
4 - Apply patch
5 - repeat with another patron
6 - Note no aidditonal hold on record with notforloan items
7 - Note with with not for loan items appears only once in results
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch does a few things:
1 - Adds itemtype not for loan status to display
2 - Adds a conditional to display notforlaon status as the reason a hold cannot be placed
3 - Seperates the lower 'Place hold(s)' buttons for single and multi holds into two template sections
4 - Handles the case where all bibs in a multi hold have no items available
5 - Disables the button for single hlds when all items are unavailable
To test:
1 - Find or create a record with all items of itemtype marked 'notforloan'
2 - Attempt to place single hold on this record from staff client
3 - See one disab;ed button, one enabled 'Place holds' button
4 - Click 'Place holds' - hold placed
5 - Cancel hold
6 - Place multiple holds with some bibs that can be held, and this one that cannot
7 - Notice message that 'Cannot place hold on some items'
8 - Click 'Place holds' - hold is generated for the notforloan bib
9 - Apply patch
10 - Place single hold
11 - Note you now see not for loan status on items
12 - Note the red x also includes message abnout not for loan status
13 - Note the 'Place hold' button is disabled
14 - Attempt multi hold
15 - Message now includes "No items available: One or more records have no items that can be held"
16 - Click 'Place holds'
17 - Above still places the hold - this is for a followup patch
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To reproduce:
- Make sure you have a patron with at least one checkout,
one hold and one fine
- On the detail page for that patron, go to Print > Print
summary
- Observe the tables are too wide to fit on a printed page
To test:
- Apply this patch
- Repeat the steps above
- Observe the table now fits on the page
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When creating or editing an additional content, the form is submitted if
only the title of the 'default' tab is filled in.
We should submit the form only if both title and content exist.
Test plan:
Create a new content using text editor (codemirror)
Confirm that the form is submitted only if title and content from the
default tab are not empty
Try again with wysiwyg (tinymce)
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Turn on SeparateHoldings and find a record that has some items at
different home libraries.
2. Look at the Other holdings(x) tab. Notice there is no Columns tool
(gear icon).
3. Go to Table Settings, try hiding columns from the otherholdings
table. You cannot.
4. Apply patch.
5. Now under the Other holdings(x) tab you should see the Columns
button, it should work.
6. Go back to Table settings and try hiding columns, it should work.
7. Now try uploading an item level cover image, make sure all columns
are still properly hidden and the Columns tool works
8. Try steps 6 & 7 but with the regular holdings table. Confirm that all
colums can properly hide.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Included a rename to table_name(s).
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The basic MARC editor has its own button associated with each subfield
for emptying the contents of the input. Since the Flatpickr "X" icon
causes a layout problem and would be redundant, we can hide it on this page.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
addbiblio.tt throws the '$(...).flatpickr is not a function' because it
is missing includes to flatpickr.min.js and shortcut-buttons-flatpickr.min.js
To fix this the addbiblio.tt should include the calendar.inc file (like
additem.tt does) which includes to those aforementioned JS files.
Test plan:
1. Edit a MARC bibliographic framework
2. Make the 902$d subfield visible in the Editor
3. Also set the 902$d subfield plugin='dateaccessioned.pl'
4. Catalogue a new biblio record
5. Notice the 902$d subfield has not been pre-populated with todays date
6. Right click, choose 'Inspect', observe this JS error in the console: "Uncaught
TypeError: $(...).flatpickr is not a function"
7. Apply patch, and restart services
8. Repeat steps 4-6 and this time observe the 902$d is pre-populated,
and there is no flatpickr JS error in the console
Sponsored-by: Chartered Accountants Australia and New Zealand
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch updates the staff interface's global JavaScript to
accommodate changes in the way focus is being handled after the jQuery
upgrade (see: https://github.com/jquery/jquery/issues/4950).
The "focus" class is removed from search header include files so that
there isn't a contradiction between which form field has the focus class
and which form field is displayed in the active tab.
To test, apply the patch and view various pages in the staff interface.
- On pages where focus is not being directed to a form field within the
main content of the page, the form field in the active search header
tab should have focus on page load:
- Patron details
- System preferences
- Cities and towns
Also test pages where a tab other than the first one is preselected:
- Bibliographic details page
- Patron lists
On these pages, focus should move to the active tab's form field when
you switch tabs.
- On pages where focus is being sent to another form field, it should
work correctly:
- Patrons home page
- Check in
- Acquisitions home page
Signed-off-by: Séverine Queune <severine.queune@bulac.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
In the staff interface you can select records for merging, batch editing,
and batch deleting from the result list. This fixes the code to check for
the specific batch edit records and batch delete records permissions, so
those actions are only shown if the user has the right permissions.
As there is no merge record permission yet, it's assumed that edit_cataloge is
needed as before (no change in behavior).
To test:
- Create a staff user with only catalogue and editcatalogue permissions.
- Do a search in the catalog of the staff interface
- Select a few records from result list to unlock the Edit button on top
- Verify it shows all three options: edit, delete and merge
- Apply patch
- Verfiy now only merging is shown
- Add the records_batchdel and records_batchmod permissions from the tools
area one after another and verify the display changes accordingly.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
When the Upload tool is accessed on a smaller (mobile) screen (less than
768 pixels wide), the Upload and Browse buttons cannot be clicked. This
patch fixes that.
To test:
1) Go to Tools -> Upload
2) Make the screen narrower, either by opening your browser's Inspector
tool and using Responsive Design Mode, or by dragging in the edge of the
window to make it narrower.
3) Notice that when the screen becomes narrower than 768px, the sections
squash together and the padding between them is lost. Try to click on
the Browse and Upload buttons, notice you cannot.
4) Apply patch and refresh the Upload Tool
5) Ensure the screen is narrower than 768px. Confirm there is now
padding between the sections, and the buttons are clickable again.
Sponsored-by: Chartered Accountants Australia and New Zealand
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
When showing an authority, there is a link to search biblio records it is used in.
Actually this link uses 'q=an=$auth_id', this is wrong for an URL, and other places use 'idx:value'.
It does not break search with Zebra nor Elasticsearch but it is better to use ':'
Test plan :
Check changed links return same results with and without patch
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch corrects JavaScript in authorities templates so that
clicking "Edit" on the authority detail page will take you to the
authority edit page while keeping the same tab open.
This patch also corrects the JavaScript which should have been
automatically moving the cursor focus to the first form field when
switching tabs in the editor.
This patch also adds the "Section" headings which are present in the
basic cataloging editor but were not added here at the time of the
page's tabs revision.
To test, apply the patch and locate an authority record in your catalog.
- Without changing tabs, choose "Edit record" from the "Edit" dropdown
menu."
- The authorities editor should load and display the "Section 0" tab.
- Return to the authority detail page and select a tab besides tab 0.
- Click back to tab 0. Editing the record at this point should open the
editor to Section 0.
- Return to the authority detail page.
- Click any of the numbered tabs besides tab 0.
- Choose "Edit record" from the "Edit" dropdown menu.
- When the authorities edit page loads the same tab should be
preselected.
- Test that when you switch tabs in the authority editor the cursor
focus is automatically moved to the first visible input.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes javascript moneyFormat function in paycollect.tt consistent
with the one in pay.tt
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
New way of formatting money amount to make it work with FR format
Test plan:
1- Set CurrencyFormat pref to FR
2- Activate Point of sale and cash register features
3- Add cash register
4- Add debit type that 'can be sold' with a price of 10.00
5- Go to point of sale, click on the item to purchase
6- Verify the Amount to be paid shows the wrong amount and can't be fixed on the interface
7- Apply the patch
8- Refresh the page and do step 5 again
9- Notice it now shows the right amount
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds a missing </div> to the bibliographic detail
page template in the section for showing component parts.
Some comments are added to clarify the markup structure.
To test you should have a record in your catalog with component
parts. Bug 11175 provides one you can import if necessary:
https://bugs.koha-community.org/bugzilla3/attachment.cgi?id=78023
To see the error, go to the staff interface, locate the record
in question and view the detail page. Under the Components tag,
scroll to the bottom. You will see content from "later" tabs at
the bottom, e.g. "There is no order for this bibliographic record"
or "No images have been uploaded for this bibliograhpic record yet."
Apply the patch and reload the page. The tabs should still look
correct, and now the tab content should be correctly isolated.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch does the same treatment for moremember.tt where the same
summary block is includes. We also correct the tab order to be a little
more consistent too.
We should really move this to an include and refer to it from both
templates instead of this copy/paste code..
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes tab texts display 'Thing (count)' as opossed to the
current mix we have.
To test, check before after the patch how it looks.
You need to:
- Enable ArticleRequests
- Set ClaimReturnedLostValue to 1 (for example)
- Have some clubs set
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Test plan:
Don't define AV for Sort1 and Sort2, edit a patron
=> Should be editable via an input box
Define AVs for Sort1 and Sort2, edit a patron
=> Should see the dropdown
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch add 2 new system preferences:
- GenerateAuthorityField667
- GenerateAuthorityField670
When Koha creates authority records from biblios, use these preferences instead of the hard-coded "Machine generated authority record." and "Work cat." values.
Test plan:
1. Make sure AutoCreateAuthorities and BiblioAddsAuthorities are enabled in the system preferences
2. Go to Home › Cataloging › Add MARC record and add a new record
3. Fill in the required fields and add a name in the 100$a field. Note the name, and add the new record.
4. run rebuild_zebra.pl -a
5. Go to Home › Authorities and search for the name you entered in 100$a
6. Select details and look at the 667 and 670 fields. They should default to the hard-coded values.
7. Apply patch, run update database
8. Edit the new GenerateAuthorityField667 and GenerateAuthorityField670 system preferences
9. Do 2-6 . Now the 667 and 670 fields should be what you entered in the system preferences.
Thanks for testing
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works well, no errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Currently when show an authority record you can see the count of records linked
with that authority, but when edit that authority record the that detail is
dissapeared.
Applying this patch will have that information also on edit mode of authority.
Test plan:
1) Search for an authority that is already connected with at least one record
2) On detail view of an authority you can check that authority is linked with
x records.
3) Edit that authority and the information about in how many records that
authority is linked is missing.
4) Apply this patch
5) Edit again that authrity and you can find now the count in how many records
is used that authority
Signed-off-by: Marjorie Barry-Vila <marjorie.barry-vila@collecto.ca>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test:
1. Make some patron reasons for suggestion via Home > Administration > Authorized values > OPAC_SUG
2. Give those reasons a description.
3. Make several suggestions via staff client and/or OPAC and apply some of the reasons you just made
4. Apply patch
5. Go to Home > Acquistions > Suggestions management
6. Give some of the suggestions some different status (PENDING/REJECTED/ACCEPTED/ect)
7. Make sure on each of the tables you can see the column 'Patron reason'
8. Go to Administration > Table settings and attempt to hide the column.
9. Confirm that the column is properly hidden on the Suggestions management page
Signed-off-by: Rhonda Kuiper <rkuiper@roundrocktexas.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Test plan:
1. Confirm that
installer/data/mysql/atomicupdate/bug_23352-add_ccode_column_to_subscriptions_table.pl
has the exec flag
2. Create a subscription. Notice the 'Collection' dropdown defaults to
the 'None' option - same as Location
3. Save the subscription without changing the 'None' collection
4. Receive the serial and confirm the 'Collection' field is empty
5. Create a second subscription. Change the 'Collection' dropdown to
'Fiction', then save the subscription
6. Receive the serial and confirm the 'Collection' dropdown is set to
'Fiction'
7. Confirm that the 'Collection code' terminology in the template is replaced with
'Collection'
Sponsored-By: Brimbank Library, Australia
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The default collection code set in the subscription will be applied if
item records are created when receiving the serial.
Test plan:
1. Apply 3 patches
2. Run updatedatabase.pl and restart services
3. Create a subscription:
- Tick the 'Create an item record when receiving this serial' radio
button
- Select values in the Location, Collection code and Item type dropdowns
- Save the subscription
4. Confirm the Location, and Collection code default values
you choose in #3 are displaying in the 'Information' tab of page that's
loaded
5. Receive the serial:
- Click 'Receive'
- Change the status dropdown from 'Expected' to 'Arrived'
- Confirm the 'Collection Code', 'Shelving location' and 'Koha item
type' dropdowns are pre-filled with the values you defined in #3
6. Run unit test t/db_dependent/Serials.t
Sponsored-By: Brimbank Library, Australia
Signed-off-by: Samu Heiskanen <samu.heiskanen@hypernova.fi>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
