So the first patron receives correct letters, but the followings received
all the previous ones AND his letters.
Eventually you end up with !n letters in message_queue where n = amount of patrons
receiving due messages as digest and having something due.
Eventually we got 4 000 000 ODUEDGST-letters of which 1 100 000 were sent to our patrons :)
This is madness!
Test plan:
0/ Delete the content of the message_queue table.
1/ Pick 3 patrons and set them to receive due messages as digest.
2/ Check 1 item out for 3 separate patrons and specify a due date today.
3/ Launch the advance_notices.pl script.
4/ Before this patch, you got 6 notices (1+2+3 [!n]). Now, you get 3 notices, 1 for each patron.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Problem exis.
Patch work as described following test plan.
No koha-qa errors
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch ensures that only orders that have been placed (i.e.,
orders whose basket is closed) are counted in the OPACAcquisitionsDetails
display.
To test:
[1] Turn on OPACAcquisitionsDetails and set AcqCreateItem to 'ordering'.
[2] Create an order for a record, but do not close the basket.
[3] View the record in the OPAC. It should not display any order count.
[4] Close the bakset.
[5] View the record in the OPAC again. This time, it should display
the count of items on order.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds direct unit tests of the new biblionumber filter
for SearchOrders. It also moves the ordernumber filter test
to the rest of the SearchOrders tests.
To test:
[1] Verify that prove -v t/db_dependent/Acquisition.t passes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a new system preference 'OPACAcquisitionDetail'.
If it is enabled, information about items on order will be displayed on
the OPAC detail page.
Test plan:
- switch on the OPACAcquisitionDetails pref.
- set the AcqCreateItems pref to 'receiving'.
- create some orders on 1 or more items.
- go to the opac detail page and verify the "Holdings" tab contains the
line "X item are on order." (at the bottom of the table containing the
item list).
- receive the items.
- verify the number of items has decreased.
- set the AcqCreateItems pref to 'ordering'.
- create some orders on 1 or more items.
- go to the opac detail page and verify the item list contains the items
with the "on order" status.
- receive the items.
- verify the received items no longer have the the "on order" status.
To test completely this feature, you should verify there is no
regression on the pref OpacMaxItemsToDisplay, OpacSeparateHoldings and
OpacSeparateHoldingsBranch.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Also removed some blank lines from the original patch and bumped up
the DBRev.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
this patch adds a negative-captcha feature to the purchase suggestions form
some info for the curious...
http://nedbatchelder.com/text/stopbots.htmlhttps://github.com/subwindow/negative-captchahttp://www.rubydoc.info/github/subwindow/negative-captcha/frames
to test this patch...
1/ apply patch
2/ enable 'suggestion' and 'AnonSuggestions' sysprefs
3/ attempt to add a 'purchase suggestion' in OPAC
adding the suggestion should succeed
4/ edit the koha-tmpl/opac-tmpl/bootstrap/en/modules/opac-suggestions.tt file,
to reveal the hidden 'negcap' field
replace line 87 opac-suggestions.tt, from...
<li id="negcap" style="position: absolute; left: -2000px;">
to ...
<li id="negcap">
5/ attempt to add another suggestion, and populate the 'negcap' field
adding the suggestion should fail
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch: Remove the bug report number in the comment since git log
cans provide the same result.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Attempting to merge authorities results in the following error:
Uncaught SyntaxError: Unexpected token u authorities-home.pl:284
showMergingInProgress authorities-home.pl:284
(anonymous function) authorities-home.pl:297
o jquery.js:2
p.fireWith jquery.js:2
e.extend.ready jquery.js:2
c.addEventListener.B
This was the result of the upgrade of jquery-cookie by the patch
for bug 11369; newer versions of jquery-cookie changed the return of
$.cookie('foo') from null to undefined when the cookie is not present.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No test plan, no errors.
Test
1. search some authorities
2. click merge, on browser dev console pops reported error message
'Unexpected token u authorities-home.pl...'
No way to marge auths
3. with pach applied, merging works again
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
For libraries with large numbers of records, using a file of barcodes in
the inventory tool without selecting filters to limit the catalog
selection to compare against can result in an error of "could not read
headers" or a page timeout.
When you upload a file of barcodes, and do not specify any filters on
the rest of the form, it effectively runs GetItemsForInventory() such
that *every* item in the database is returned. On a large enough
database, this takes so long that the script times out.
The current documentation in the manual implies that if you upload a
file of barcodes, the *only* thing it does is set the date-last-seen
field. This is not entirely true; it also tries to compare the list of
scanned items to what is expected to be seen in the list of items.
The work-around for libraries with a large number of item records is to,
when uploading a file of barcodes, to also set the filters (e.g.,
library, shelving location, call number range, etc.) to
specify the range of items that the file of barcodes corresponds to.
This patch adds a warning when a librarian attempts to upload a
barcode list file for comparison without selecting any filters
to limit the catalog selection.
Test Plan:
1) Apply this patch
2) Browse to the inventory tool
3) Click the "Choose File" button, select a file
4) Click the "Submit" button
5) You should see a warning message
6) Click "Cancel"
7) Select one of more filters
8) Click the "Submit" button
9) This time the script should proceed without triggering the warning.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described following test plan.
No errors
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a line in opac-user.pl passing author info to opac-user.tt
Thanks to cait for helping me out and showing me how to solve this with half the amount of code.
Test plan:
* Reserve a book.
* Go to the opac and log in as the patron you reserved the book for.
* Apply the patch with change to opac-user.pl
* Revisit the opac and refresh it.
* See if author now shows up
Signed-off-by: Magnus Enger <digitalutvikling@gmail.com>
Created a hold. Author is not shown n the public catalogue before
applying the patch, but it does show after applying the patch. Way
to go, Viktor!
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If you accept or reject a suggestion using the "Others..." option and
entering a reason manually, the text is not showing up in the Bootstrap
OPAC theme as it does in CCSR and prog. This patch corrects the problem.
This patch also adds a missing [% USE AuthorisedValues %] which would
cause errors if the template tried to display a custom suggestion status
as defined in the SUGGEST_STATUS authorized value category.
To test, accept or reject a suggestion and specify a custom reason. View
that suggestion in the Bootstrap OPAC and confirm that the custom reason
is displayed.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The patron summary page in the bootstrap OPAC does not show subtitle in
the list of checkouts, overdues, or holds. This patch corrects this.
To test, set your OPAC theme to bootstrap and log in to the OPAC as a
user who has items checked out, items overdue, and items on hold. At
least one of each of those should be a title which has a subtitle as
defined in Administration -> Keyword to MARC mapping. Subtitles should
appear correctly under the "Checked out," "Overdue," and "Holds" tabs.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Pushed to master by me in my role as OPAC module maintainer
Temporary fix into preferences.pl.
Bug 11944 should provide the real fix..
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Currently, slips cannot be printed in circulation, members, or the
self check out when using Chrome.
This patch adds a timer of 1ms which allows Chrome's custom code to
prevent "window.close" occuring before the user has dealt with the
print window.
This patch also allows admins to use the 'IntranetSlipPrinterJS'
system preference to override the slip printing code by centralizing
all the slip printing code in slip-print.inc, and including this JS
anywhere it's needed in the staff client.
I haven't used this include in the OPAC SCO but perhaps it would make
sense to do so as well (even if it isn't referred to in the syspref's
name).
_TEST PLAN_
1) Using Chrome on Windows (not sure if this is an issue on other OSes),
try to print a slip in the following locations:
Fines Tab -> Print button
koha-tmpl/intranet-tmpl/prog/en/modules/members/printfeercpt.tt:
Details tab -> Print button -> Print slip || Print quick slip
koha-tmpl/intranet-tmpl/prog/en/modules/members/moremember-receipt.tt:
Details tab -> Print button -> Print summary
koha-tmpl/intranet-tmpl/prog/en/modules/members/moremember-print.tt:
Fines tab -> Accounts tab -> Print (Manual invoice of $5 sundry)
koha-tmpl/intranet-tmpl/prog/en/modules/members/printinvoice.tt:
Checkout tab -> Print button
koha-tmpl/intranet-tmpl/prog/en/modules/circ/printslip.tt:
Finish button
koha-tmpl/opac-tmpl/bootstrap/en/modules/sco/printslip.tt
2) Note that each time you try to print, a new print page is created
but closed before you have a chance to print.
3) Apply the patch
4) Repeat Step 1
5) Note that the print page now doesn't close until after you've
chosen to print or cancel.
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Using perl v5.18, the following is warned on updating/installing
templates:
Smartmatch is experimental at ./translate line 54.
Moreover, the following should exist with previous perl versions:
perlcritic xgettext
Subroutine prototypes used at line 29, column 1. See page 194 of PBP.
(Severity: 5)
Subroutine prototypes used at line 44, column 1. See page 194 of PBP.
(Severity: 5)
Subroutine prototypes used at line 60, column 1. See page 194 of PBP.
(Severity: 5)
Subroutine prototypes used at line 72, column 1. See page 194 of PBP.
(Severity: 5)
Subroutine prototypes used at line 89, column 1. See page 194 of PBP.
(Severity: 5)
Variable declared in conditional statement at line 105, column 13.
Declare variables outside of the condition. (Severity: 5)
Subroutine prototypes used at line 127, column 1. See page 194 of PBP.
(Severity: 5)
Subroutine prototypes used at line 136, column 1. See page 194 of PBP.
(Severity: 5)
Variable declared in conditional statement at line 190, column 7.
Declare variables outside of the condition. (Severity: 5)
Subroutine prototypes used at line 237, column 1. See page 194 of PBP.
(Severity: 5)
Bareword file handle opened at line 238, column 5. See pages 202,204 of
PBP. (Severity: 5)
Two-argument "open" used at line 238, column 5. See page 207 of PBP.
(Severity: 5)
Subroutine prototypes used at line 277, column 1. See page 194 of PBP.
(Severity: 5)
Subroutine prototypes used at line 311, column 1. See page 194 of PBP.
(Severity: 5)
Bareword file handle opened at line 350, column 9. See pages 202,204 of
PBP. (Severity: 5)
Two-argument "open" used at line 350, column 9. See page 207 of PBP.
(Severity: 5)
Bareword file handle opened at line 353, column 5. See pages 202,204 of
PBP. (Severity: 5)
Bareword file handle opened at line 359, column 5. See pages 202,204 of
PBP. (Severity: 5)
Two-argument "open" used at line 359, column 5. See page 207 of PBP.
(Severity: 5)
perl -wc xgettext.pl
\1 better written as $1 at TmplTokenizer.pm line 474.
main::token_negligible_p() called too early to check prototype at
xgettext.pl line 52.
xgettext.pl syntax OK
Test plan:
Apply this patch and verify the warnings/errors does not appear anymore
and no regression is found on creating/updating/installing templates.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no koha-qa errros.
Tested with perl v5.18.2
No warnings, no problem detected on create/update/install i18n files
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 10833 introduced a variable loop but does not reset it every
iteration.
So the first patron receives correct letters, but the following ones
received all the previous ones as well as their own notices
Test plan:
0/ Delete the content of the message_queue table.
1/ Define advanced notices sent 2 days in advance for 2 patrons.
2/ Check 1 item out for each one and specify a due date today + 2 days.
3/ Launch the advance_notices.pl script.
4/ Before this patch, you got 3 notices. Now, you get 2 notices, 1 for
each patron.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work well, no errors.
Tested following test plan, printing on screen or saving into db,
3 messages before, 2 after (advance_notices.pl -v -n -m 2 -c)
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch ensures that a patron category that is present
in the (English) sample data is used for the ILS-DI tests,
avoiding a situation where one part of AddMember was trying
to access a patron category via DBIC but failed because
it was not visible to it yet.
Note that this will become easier once C4::Context->dbh
and DBIC are using the same base DBI database handles.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Conform former (implicit) behavior the handler now prints warnings by
default (via STDERR to logfile).
This can be adjusted by: $engine->print_warns(0);
Test plan:
Generate some error on a XSLT file (e.g. wrong path).
Check if your log contains the associated error(s)/warning(s).
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Modifies showmarc and opac-showmarc to use new XSLT handler.
Removes cardview.pl as obsolete script.
Modifies C4/Record.pm and a typo in the test Record.t.
Test plan:
[1] catalogue/showmarc: Go to Cataloging. Search. Click Card.
[2] opac-showmarc: Go to opac detail, MARC view.
Open URL for plain view in new tab.
Change URL: Change viewas=html to viewas=card
[3] Verify that there are no references in the codebase to cardview.pl
[4] C4/Record.pm: Run the Record.t test in db_dependent.
This test uses marc2modsxml, triggering the change.
Additional: export to MODS from opac-detail.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Views Ok. Test pass. No more cardview. No koha-qa errors
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Incorporate the new object into C4/XSLT module.
The handler object needed one adjustment to allow for passing URLs.
Removed the GetURI function; it is no longer needed.
Added some documentation lines.
Moved a file-level lexical upwards in the code for visibility.
Removed some tabs (on two lines).
Note: The handler could perhaps be moved up to the Context module, or
be saved in a global ('our') variable. But I would rather not do that
now, making testing not too complex at this moment.
Test plan:
Enable XSLT preferences for opac and intranet.
Check result and detail pages.
Check individual list display (virtual shelves).
Force an XSLT error by editing one of your xsl files. Check the
corresponding display.
Put an URL in one the XSLT prefs (could just be to your own server).
Check the display.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Running XSLTParse4Display in a loop showed no significant performance
change.
One pass cost me around 0.012 sec (except for the first pass).
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Results, detail, url and list view Ok
No koha-qa errors
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan:
Verify if XSLT_Handler.t passes.
You could also sabotage the test by removing one of the test xsl files.
Or you could 'repair' the bad xsl file (test02). Remove the second line
redefining the xsl variable.
In all those cases the unit test should fail now.. Discard your changes :)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Test pass. No koha-qa errors.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In achieving the goals of umbrella report 6536 (Z3950 improvements), this
report adds a XSLT handler object to the Koha namespace.
A follow-up adds unit tests for this module.
This patch does not yet incorporate the new object into Z3950 search. So
it does not change any behavior and is therefore harder to test.
Test plan:
Run the unit tests of the follow-up patch on report 11826.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
I tested the new module in two additional ways:
[1] Made a simple script (four lines as below) that ran a larger xml file
with 1500 records through a test XSLT file modifying the title.
my $eng= Koha::XSLT_Handler->new;
open my $fh1, '<', '_example_file';
my @xml= <$fh1>;
print $eng->transform( join('', @xml), '_example_xsl_file');
[2] Incorporated the object into my local changes of Breeding.pm (based on
older work, not ready for submittal now).
Ran transformation on Z3950 search results. Worked well :)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Test runs Ok. No koha-qa errors.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
As the way we need to reference Apache instance names has now changed
between 2.2 and 2.4, we need to try it out both ways to make sure we get
it right.
This also allows koha-create/koha-disable to try the .conf version of
the name if the first one doesn't work.
To test:
* Create an instance on an Apache 2.2 system with koha < 3.16
* Upgrade to 3.16 with this patch, saying 'yes' to the renaming question
** Make sure you don't see the warning: Warning: problem enabling $site
in Apache
* Do a 'service apache2 restart'
* Make sure you can still access the instance
* Make sure that /etc/apache2/sites-enabled/instance.conf exists as a link
to /etc/apache2/sites-available/instance.conf
* Check that koha-create and koha-remove behave like you'd expect.
Note:
* If you need to make debconf forget that it asked you the question
about renaming so that it'll do it again, then run:
echo "unregister koha-common/rename-apache-vhost-files" | sudo debconf-communicate koha-common
* 'debconf-show koha-common' will show you the current debconf
configuration.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Changed the syspref.sql file to remove one of the doubled
up UNIMARCAuthrityField100 that slipped in with an earlier
patch on this bug.
Passes all tests and QA script, also t/db_dependent/Circulation_issue.t
Tested with items that had
- no notforloan value set
- notforloan value not used in updateNotforLoanStatusOnCheckin
- the notforloan value defined in UpdateNotForLoanStatusOnCheckin
Also verified it works the same, when the item was checked out or
not checked out on return.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Some libraries would like to streamline the cataloging process my
automatically updating notforloan values on checkin. For example, an
item is set to notforloan of -1 ( ordered ). The item, is received,
processed, and checked in for the first time before being shelved.
The checkin automatically changes the nfl value from -1 to 0. The
same workflow could be used for damaged items as well.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Set the new system preference UpdateNotForLoanStatusOnCheckin
to the following:
-1: 0
0: 1
4) Create an item, set its notforloan value to -1
5) Check in the item, note its not for loan value is now 0
6) Check in the item again, note its not for loan value is now 1
7) Check in the item again, note its not for loan value reamins 1
Signed-off-by: Havilah Lyon <havilah@aflibrary.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Testing notes on last patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- Fix breakage of tablesorting when OpacLocationBranchToDisplay
is set to both.
- When displaying the home library, ensure that its correct
name and URL are displayed
- Remove the attempt to display the "opac_info" tooltip for
the home library, as it is not currently retrieved.
RM NOTE: Rather than add a GetOpacInfo function or the like
to the TT Branches plugin, simpler would be adding a
plugin function that fetches a DBIC result object for
a given branchcode, thereby allowing any column in the
branches table to be fetched into the template.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The QA follow-up which adds GetURL to the TT branches
plugin means that GetItemsInfo no longer needs to be changed.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
[1] Fix capitalization
[2] Move logic for getting the home library name URL to the
Branches TT plugin
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Currently, in opac-detail.pl, there exists a column named 'Location'.
This column lists the name of the holding branch, and the item's
location description. This can cause confusion to borrowers, as
they may assume that the holding branch is the *owning* branch
(homebranch) of an item.
This could cause a situation where a borrower waits for an
item to be returned to his or her library, only to find that
the library never owned that item, and it was transferred back
to its homebranch. It could also lead a borrower to falsely
assume that his or her home library does not own a copy of a
particular item because the borrower does not see an his or her
home library listed for any of the items on the record.
In addition, even when the holding branch is different
than the home branch, the item's shelving location is displayed,
even though that branch may not use that location.
This commit makes the item details table equivalent to the intranet
details page by adding a "Home Library" column, which displays the
item's home library, as well as the shelving location.
If singleBranchMode is enabled, this column disappears and the
"Location" column displays the shelving location only.
This commit adds two new system preferences:
OpacLocationBranchToDisplay, which defines whether
to display the holding library, the home library,
or both for the opac details page.
OpacLocationBranchToDisplayShelving, which defines
where the shelving location should be displayed,
under the home library, the holding library, or both.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described. Tested all variations.
No koha-qa errors.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a new issuing rule: maxsuspensiondays.
A new column "Max. suspension duration (day)" appears in the main table
of the issuing rules.
If this value is filled, on returning an item, a patron won't be
suspended longer than this cap.
Test plan:
1/ Set "suspension in days" to 2.
2/ Check an item out to a patron and specify a due date to today - 10
days.
3/ Check the item in and verify the patron is suspended until today + 10
* 2 days.
4/ Remove the suspension.
5/ Set "Max. suspension duration" to 10.
6/ Check an item out to a patron and specify a due date to today - 10
days.
7/ Check the item in and verify the patron is suspended until today + 10
days.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
There is currently no way to set the privacy setting for newly created
patrons. This patch adds a new field "default privacy" to the patron
categories such that each patron category may have a different default
privacy setting.
Test Plan:
1) Apply this patch
2) Edit a patron category, change the default privacy to "forever"
3) Create a new patron of that category
4) Log into the catalog as that patron, verify the privacy setting
is set to "forever"
5) Repeat steps 2-4 with the settings "never" and "default"
Signed-off-by: Joel Sasse <jsasse@plumcreeklibrary.net>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Bug 6254 [QA Followup 1] - can't set patron privacy by default
* Adds default privacy column to summary table
* Adds default privacy to delete category summary
* Adds "AFTER categorycode" to the database update
* Whitespace cleanup and formatting for affected code blocks
* Switch basic DBI queries to DBIx::Class to simplify code
* Adds reference to misc/cronjobs/batch_anonymise.pl to description
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Bug 6254 [QA Followup 2] - can't set patron privacy by default
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Bug 6254: QA FIX: remove trailing whitespaces
This patch removes trailing whitespaces/tab and fix the fields order in
the updatedb entry (according to the kohastructure.pl).
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Retested with all 3 themes, works as expected.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch changes the default behavior for the 'force' value.
If the pref is set to force, no item is preselected and the item list is
shown.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
