Test plan:
1. Ensure that ExpireReservesMaxPickUpDelayCharge is set to 0.
2. Place a hold (doesn't matter whether it's a bib/item-level hold),
then confirm the hold by checking it in.
3. Check in the item again, and hit Cancel.
4. The reserve in question should be cancelled.
5. Repeat steps 2-4 twice, once after setting
ExpireReservesMaxPickUpDelayCharge to a nonzero value and again
after clicking the "Forgive fees for manually expired holds"
checkbox.
A fine should only be applied when the syspref is enabled and the
checkbox is not checked. Also, the checkbox should only appear after
enabling the syspref. And finally, the checkbox should remember whether
it is checked across multiple checkins, same as the "Forgive overdue
charges" and "Book drop mode" checkboxes.
Signed-off-by: Jason Burds <jburds@dubuque.lib.ia.us>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended patch: Removed 2 debugging lines.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Display 773 in opac and staff details when ind1 !=1
Test plan
=========
1/ Add a new record which uses the 773 field to an instance running
master code. (the selected MARC framework should have the 773's
relevant sub-fields enabled and visible on staff client, opac and
the editor).
2/ Set ind1 as '0' (zero). The note should be displayed both on OPAC
as well as the staff client.
3/ Reset ind1 with a non-zero value or leave it blank. The display
note should no longer be visible from either client or opac.
4/ Apply the patch.
5/ Repeat step #1 and #2. The note is displayed on staff and opac.
6/ Repeat step #3. The display note should be visible on both staff
and opac.
7/ run koha-qa.pl -c 1 -v 2
Note : For #1 above, the following LoC record was used:
http://www.loc.gov/marc/bibliographic/examples.html#monographic
The patch applied cleanly and performed as expected.
The koha-qa.pl gave OK as results.
Signed-off-by: Indranil Das Gupta <indradg@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
If a patron has duplicate accountno's for two different fines in Koha this will trigger the error
usi_escape: Unmatched [ in regex; marked by <-- HERE in m/([ <-- HERE ])/ at (eval 133) line 1.
upon attempt to pay. How those accountno's get duplicated is unknown, but considering accountno
is somewhat vestigial at this point in time, it would be much more sensible to use accountlines_id
which is has guaranteed uniqueness at the database level.
Test Plan:
1) Create a patron with 2 fines
2) Edit the accountno's for those fines and set them to 0
3) Attempt to pay one, note the error
4) Apply this patch
5) Refesh the page
6) Attempt to pay one, no error this time!
7) Test Pay, Write off, Pay amount, Write off all, and Pay selected
Signed-off-by: Deborah Duce <deborah.duce@huntsvillelibrary.ca>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
To test:
1) Go to cgi-bin/koha/errors/errornumber.pl to see the error messages which currently don't make sense (ie cgi-bin/koha/errors/401.pl etc). Have only made changes to 401, 403 and 404
2) Apply patch
3) Go to cgi-bin/koha/errors/401.pl --> Check that it now says "This error means that you aren't authorized to view this page." and "Please log in and try again.". Check that 'log in' redirects to the log in page (mainpage.pl).
4) Go to cgi-bin/koha/errors/403.pl --> Check that it now says "This error means that you are forbidden to view this page."
5) Go to cgi-bin/koha/errors/404.pl --> This page should be very different. Check that the 'Error 404' is now in italics and not bold. Check that the page gives a list of reasons the user may have been given this error and some options for their next step.
Signed-off-by: Catherine <cnorthcott.work@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended patch: replace tab with 4 spaces.
Note: I am not sure the em tag is useful here.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
The translation script adds quotes ("") around translated string (Edit
for instance).
Which breaks the json structure.
Example:
"dt_action": "<a style=\"cursor:pointer\"><form action='shelves.pl'
method='get'><input class="editshelf" value="Editar" type="submit"
/></form></a>"
Test plan:
1/ On the staff interface create a private list
2/ Go to More > Lists ('Your lists' tab)
3/ Translate the templates to any language like:
$ cd misc/translator/
$ perl translate install es-ES
4/ Enable the translated templates on the sysprefs
5/ Switch to the translated language
6/ Go to the lists page (Mas > Listas in es-ES)
The list should be displayed correctly.
Note: There is a limitation. If a translated string contains a simple
quote ('), it will also break the json.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Bug 13417 allows a librarian to delete any lists if he has the
permission (delete_public_lists).
There is a mismatch in the perm check.
A user can delete a list with the ability to edit (manage) it.
Test plan:
1/ Create a list A with user A
2/ Create a list B with user B
3/ A should be able to manage and delete the list A.
He cans delete B only if he is superlibrarian or has the
delete_public_lists permission.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
To test:
I) Apply the patch
II) Run updatedatabase.pl
scenario I)
1) Add some content in RestrictedPageContent and RestrictedPageTitle sysprefs.
2) Add your machine ip (ex. 127.0.0)
3) Validate cgi-bin/koha/opac-proxypage.pl shows a page with RestrictedPageContent and RestrictedPageTitle contents.
scenario II)
1) Logout opac page
2) Add some content in RestrictedPageContent and RestrictedPageTitle sysprefs.
3) Add other ip that your machine ip.
4) Validate: cgi-bin/koha/opac-proxypage.pl shows a login page.
5) Validate: cgi-bin/koha/opac-proxypage.pl shows a page with RestrictedPageContent and RestrictedPageTitle contents after login.
Followed both scenarios, works as expected.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 13485 [QA Followup]
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 13485 - Atomic Update + Rename Proxy page to Restricted page
Test plan:
I) Apply the patch
II) Run updatedatabase.pl
scenario I)
1) Add some content in RestrictedPageContent and RestrictedPageTitle sysprefs.
2) Add your machine ip (ex. 127.0.0)
3) Validate cgi-bin/koha/opac-restrictedpage.pl shows a page with RestrictedPageContent and RestrictedPageTitle contents.
scenario II)
1) Logout opac page
2) Add some content in RestrictedPageContent and RestrictedPageTitle sysprefs.
3) Add a diffrent ip.
4) Validate: cgi-bin/koha/opac-restrictedpage.pl shows a login page.
5) Validate: cgi-bin/koha/opac-restrictedpage.pl shows a page with RestrictedPageContent and RestrictedPageTitle contents after login.
new file: installer/data/mysql/atomicupdate/Bug13485_RestrictedSitesPage.sql
modified: installer/data/mysql/sysprefs.sql
modified: koha-tmpl/intranet-tmpl/prog/en/modules/admin/preferences/opac.pref
renamed: koha-tmpl/opac-tmpl/bootstrap/en/modules/opac-proxypage.tt -> koha-tmpl/opac-tmpl/bootstrap/en/modules/opac-restrictedpage.tt
renamed: opac/opac-proxypage.pl -> opac/opac-restrictedpage.pl
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
We should show the date a waiting hold is set to expire for each hold in
the list of waiting holds in circulation.pl
Test Plan:
1) Apply this patch
2) Find a waiting hold for a patron, browser to circulation.pl
for that patron
3) Set system preference ReservesMaxPickUpDelay to 5
4) Refresh circulation.pl, note the waiting holds now display a
"waiting until" part with the waiting date plus 5 days
5) Set system preference ReservesMaxPickUpDelay to 0 ( or empty
string )
6) Refresh circulation.pl, note the waiting hols no longer have a
"waiting until" line.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Followed test plan successfully. Automated tests successful.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Cathi Wiggins <CWIGGINS@ci.arcadia.ca.us>
Signed-off-by: Megan Wianecki <mwianecki@mplmain.mtpl.org>
Bug 13030 [QA Followup] - Fix unit tests
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
When viewing a list, the focus/cursor is no longer on the "add items" field below the list.
This patch moves the "Add Item" form at left part of page so that it is always shown (usefull when there are a lot of items). And adds focus to barcode input so you can enter several items with a barcode scanner.
Test instructions:
1. Create a list
2. Make sure you have an object with an assigned barcode
3. Go to the list
=> The barcode entry interface should be at left and has the focus
4. Enter the barcode and press enter (or use a scanner)
=> The item is added to the list
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
I like the new position.
Works well, focus on input box
No errors
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch introduces checks on the about.pl page so the user is warned
for a deficient configuration.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch does:
[1] Some trivial template changes. Modified some comments (POD lines).
[2] Converted plugin to new style.
[3] Table updates: renames id to hashvalue, adds a autoincrement id,
adds filesize, timestamp, owner and category.
RM: This db rev is in a separate sql file in atomicupdate.
[4] Code references to computed hash renamed to hashvalue instead of id.
[5] Removed some code pertaining to exposing upload dir structure. The user
now may choose a category; the uploader takes care of storage.
The list of upload categories is now taken from authorised values; this
might become a separate table in the future. (If there are none,
the upload process creates one default fallback.)
We can add e.g. permissions later, subdir structure, etc. (So dir will
not necessarily be category anymore.)
Test plan:
[1] Run the db revision.
[2] Upload new file. Check the record in the table. Delete it again; check.
[3] Run t/db../UploadedFiles.t.
[4] Run t/db../FrameworkPlugins.t -incl cataloguing/value_builder/upload.pl
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This adds a dependency on bug 5010, in that the protocol is
assumed in the OpacBaseURL system preference. It also adds
improved error handling.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Two problems were discovered while doing a fresh install
of Koha. These problems in the kohastructure.sql file are
addressed with this patch.
Clicking the plug-in icon should cause the popup window
to refocus. This adds the refocus code to the upload.pl file.
The path to the jquery.js script was wrong in the
upload_delete_file.tt file. Changed [% themelang %] to
[% interface %].
If a user clones 856$u after uploading a file, deletes the file,
and then clicks the plugin icon on the first 856$u, this will go
immediately to the upload screen with an informative error
message.
After some validation was added, it was extended to include
other cases. This serves to patch 6874 to a state where sign
off should be possible.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch adds a javascript and a server-side checks
Test plan:
1/ Choose a file, leave the radios not selected and submit
2/ You have a javascript alert which prevents form to be submitted
3/ Disable javascript and repeat step 1
4/ Form is submitted but form is redisplayed with an error message
telling you to choose a directory.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
* Renames uploadPath to upload_path to follow the standard naming
conventions in koha-conf which use underscores rather than camel case
* Remove reference to intranet-tmpl and replace with [% interface %]
required to pass qa
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Squash of the following commits:
return with explicit undef removed
Follow-up for PBP fixes
follow-up fix POD syntax
follow-up jquery has moved
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended: removed POD changes in Biblio.pm while rebasing.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
New cataloging plugin upload.pl and new system preference 'uploadPath'.
upload.pl provide a way to upload files on the server and store a link
(url) to it in MARC
uploadPath is the absolute path on the server where the files will be
stored. It's possible to have a hierarchy of directories under this path
and the plugin will allow to choose in which directory to store the
file.
Stored value in MARC subfield looks like this:
<OPACBaseURL>/cgi-bin/koha/opac-retrieve-file.pl?id=<SHA-1 of the file>
So both 'uploadPath' and 'OPACBaseURL' sysprefs have to be set for this
plugin to work correctly
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Slightly amended/simplified the patch during QA: The changes to
GetMarcUrls are not really needed, and would have needed some
attention. Another link text can be supplied by the plugin too.
This also reduces the need for changes in basket.pl,
MARCdetail.pl, detail.pl, opac-basket.pl and opac-detail.pl.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Edit: more meaninfull commit subject
Typo found in batch_record_modification.tt file for Koha help in 3.20
Test plan:
1) Go to url 'koha-tmpl/intranet-tmpl/prog/en/modules/help/tools/batch_record_modification.tt:20' and check the typo "critera" or go to Tools › Batch record modification, open up the help
2) Apply the patch
3) Repeat step 1 and check if the typo is fixed.
Sponsored-by: Universidad de El Salvador
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Typo found in basket.tt file for Koha help in 3.20
Test plan:
1) Go to url 'koha-tmpl/intranet-tmpl/prog/en/modules/help/acqui/basket.tt:24' and check the typo "susbscription" or go to Acqusitions > create or view an existing basket, open up the help
2) Apply the patch
3) Repeat step 1 and check if the typo is fixed.
Sponsored-by: Universidad de El Salvador
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This is the original patch for bug 12892 and replaces the older style of
fetching the holds data with Koha Objects. It will be used as a
foundation for future features.
Test Plan:
1) Apply this patch
2) Create a hold, set to waiting
3) Browse to circulation.pl for that patron
4) Note you see the list of waiting holds
5) Switch your logged in branch to a different branch
6) Note the "Waiting at" line is no longer emphasized.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Cathi Wiggins <CWIGGINS@ci.arcadia.ca.us>
Signed-off-by: Megan Wianecki <mwianecki@mplmain.mtpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
TEST PLAN
---------
1) Install first two patches
2) do not install, or uninstall Template::Plugin::Stash
3) Upgrade to make sure system preference is added.
4) Set the system preference to turn it on for Staff and OPAC
5) Refresh staff -- kaboom
6) Load OPAC -- kaboom
7) Apply this patch
8) Reload staff and OPAC
-- nice HTML comment about what is wrong.
9) run koha qa test tools.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Neat, runs well. Tested with/without sysprefs and Template::Plugin::Stash
No koha-qa errors
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
It would be incredibly helpful if we could easily enable Koha to dump
all Template Toolkit variables to a comment for debugging purposes.
Test Plan:
1) Apply this patch
2) Run updatedatabase
3) Enable the new system preferences DumpTemplateVarsIntranet and
DumpTemplateVarsOpac
4) Load a page in the staff intranet, view the html source
5) Note the template toolkit variables are embedded in an html comment
6) Load a page in the opac, view the html source
7) Note the template toolkit variable are embedded in an html comment
NOTE: I had to cpan2deb Template::Plugin::Stash to test.
This is not optimal. Additionally:
http://www.template-toolkit.org/docs/modules/Template/Plugin/index.html
does not contain Stash. I suspect this was how it was
introduced initially by TT.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Trivial patch that shows (All libraries) instead of an empty cell
for notices that are applicable across all libraries.
Test plan
=========
1) Log in to staff client
2) Tools->Notices & slips
3) Add a dummy notice for all libraries
-- test code, test description, email - test subject, test content
Click Submit
4) Click Delete
-- note that the Library column value is blank.
5) Click the no option
6) Apply this patch
7) Click Delete
-- note that the Library column value is (All Libraries).
8) run koha qa test tools.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
The size of the barcode in patron card creator was hardcoded to 1% of the card height and 80% of the card width.
This patch exposes both values in the layout editor. If no values are given, the previousely hard coded values (0.01 / 0.8) are used in order to work with existing card definitions.
To test:
- Go to Home > Tools > Patron card creator
- Export a patron card (PDF) from en existing definition
- Apply patch
- Export patron card again, compare results (should be the same)
- Go to Home > Tools > Patron card creator > Manage card layouts
- Edit the layout you use for testing and set barcode scaling values e.g. to 0.03 for height and 0.4 for widht
- Export patron card again, verify that barcode size changed
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
removes the now redundant instruction "Note: you should have no
reasons to modify the following default values" and replaces it
with "Note: change the variable type to one of the dropdown values
as needed"
Signed-off-by: Tadeasm <tadeas.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The information needed to build the dropdown is already passed.
This patch uses it to build the variable type dropdown correctly.
TEST PLAN
---------
1) Apply 14135
2) In the staff client:
Home -> Global system preferences -> Local use
3) Click 'Edit' on any system preference.
4) Note all the types listed.
5) Click 'Cancel'
6) Apply this patch
7) Click '+New Preference'
8) Enter data to have a decent 'Free' type preference.
9) Click 'Save'
10) For each type noted in step 4 (do 'Free' again last)
a) Click 'Edit' for the added system preference
-- it should be the last saved variable type.
b) Change the variable type to the next type.
c) Click 'Save'
d) Repeat steps (a) through (c) until all the types have
been done.
-- NOTE: Yes, there are other strange things here, but
those are beyond the scope of this bug.
11) Run koha qa test tools
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Tadeasm <tadeas.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It will avoid further changes.
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Patch adds the shipment as a new separate column to the
search results of the invoices search.
To test:
- Search for invoices in the acquisition module
- Verify the results table shows the shipment date
- Verify that sorting works correctly
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In comment #20, Katrin requested the about page be updated
to reflect the addition of a jquery plugin.
TEST PLAN
---------
1) Apply all patches
2) Log in to Staff Client
3) Home -> About Koha -> Licenses
-- jQuery Validation Plugin is now listed nicely.
4) Run koha qa test tools
License appears as expected, qa OK
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds server-side & client-side validation for email
form fields in the members/memberentry -view and in the
opac/memberentry-view (bootstrap).
I recently added simple validation for phone number and email address fields
for our in-house koha and saw this old bug: I'm open to any ideas on how
to do this better. Validation for phone numbers would be easy to add on
top of this but I left it out since this bug is only about the email
fields.
To test:
1) Select a member and go to any of the edit forms with email fields
(Primary info, "Library use", "Alternate address", "Alternative
contact").
2) Disable javascript in the browser in order to test server-side
validation and try to input invalid emails in each of the email form
fields.
3) Confirm that an invalid address is catched from any of the email
fields, an alert shown for each invalid address and that the member's
information was not updated with invalid data.
4) Enable javascript in the browser.
5) Confirm that the jquery validation plugin caches invalid addresses
from any of the email fields and that you cannot send the form before
correcting the problem.
6) Perform the same tests for the opac-memberentry-view.
Note: as the jQuery validation plugin doesn't exist in the bootstrap
folder, I just copied it over from the staff-client folder -how to deal
with this?
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
I have undone the changes to opac.css so that they can be submitted as a
separate patch. I have some other follow-ups to make as well.
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Typo found in stage-marc-import.tt file for Koha help in 3.20
Test plan:
1) Go to url 'koha-tmpl/intranet-tmpl/prog/en/modules/help/tools/stage-marc-import.tt:28' and check the typo "precendence" or go to Tools > Stage MARC records for import and open up the help
2) Apply the patch
3) Repeat step 1 and check if the typo is fixed.
Sponsored-by: Universidad de El Salvador
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
adds alphabetical sorting to <select> lists displayed by
preferences.tt. although added for sorting the days of the
week, this may have larger ramifications. haven't been
tested thoroughly, but no apparent breakage seems to be
happening in preferences.
NOTE: Nice tweak. Makes days of week in sensible order.
Properly adds sorting based on documentation that
is really hard to find.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Mubassir Ahsan asked on the Koha mailing list:
Is there any option to set Saturday as the first day of
the week? Please help me.
CalendarFirstDayOfWeek is currently either Sunday|Monday.
By converting it to 0|1|2|3|4|5|6
(Sunday, Monday, ..., Saturday), we can allow any day of the
week to be the first day of the week in the date picker.
TEST PLAN
---------
1) Backup DB
2) In mysql:
> DELETE FROM systempreferences;
> SOURCE .../installer/data/mysql/sysprefs.sql
> SELECT variable,value FROM systempreferences;
-- It should say 'CalendarFirstDayOfWeek' and '0'
May say '1' if you are using Norwegian.
3) Restore your DB
4) .../installer/data/mysql/updatedatabase.pl
-- If your previous value for 'CalendarFirstDayOfWeek' was
'Sunday', it should be '0'. For 'Monday', it should be '1'.
5) Test an installation with 'de-DE' as the language.
-- The default value should be '1'.
6) Test an installation with 'nb-NO' as the language.
-- The default value should be '1'.
7) In the staff client, confirm that any day of the week is
available in the I18N/L10N system preferences for the
CalendarFirstDayOfWeek dropdown.
-- I'm aware they aren't in order, but I'm after
functionality, not finesse.
8) In another tab, go to a staff place that has a datepicker.
For example, Home -> Tools -> Inventory/stocktaking
9) For each possible value in the CalendarFirstDayOfWeek,
go to the other tab, refresh the page after updating the
system preference, and click the datepicker icon.
-- The date picker should then start on the selected
day of the week.
10) Log into OPAC
-- This may require setting: opacuserlogin to 'Allow'.
11) Click the personal details tab on the left.
12) There is a date picker for the date of birth.
-- The date picker should then start on the selected
day of the week.
13) Run koha QA test tools.
NOTE: not an atomic update, since this is an old patch.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch make inactive vendors really inactive.
That means an inactive vendor would not be able to add a basket / add an order.
Revised test plan
=================
1/ In the acquisition module create 2 vendors: 1 active and 1 inactive.
2/ On the acqui/booksellers.pl, acqui/uncertainprice.pl,
admin/aqcontract.pl and acqui/supplier.pl (pages which include the
acq toolbar), you should be able to, for both the 'active' as well
as the inactive vendor :
(a) add new basket
(b) add order items to the basket
Remark: This is *wrong*. You should be able to do so only for active
vendor.
3/ Apply the patch
4/ Go to the links in step #2 above and select the inactive vendor
you should no longer be able to:
(a) add new basket
(b) add order items to the basket
Remark: This is the *correct* behaviour
5/ No change should be noted for vendor marked "active", and should
be able to undertake operations 4 (a), 4 (b) and 4 (c).
Remark: This is the *correct* behaviour.
6/ run koha qa tests tool
Bug 12054: (follow-up) Inactive vendors should be inactive
Don't display "add order""block and buttons if the vendor is inactive.
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
When creating a new notice, warn is triggered "Argument "" isn't numeric in numeric gt (>) at line 400". Same warn is triggered when changing Koha module option to any other module.
To test:
1) Go to Tools, then Notices & Slips
2) Click 'new notice'. Notice warn in intranet-error.log
3) Change Koha module to another module. Notice warn is triggered for every change
4) Apply patch and reload page
5) Change Koha module to another module. Notice there are no longer warns
6) Go back to Notices & Slips and click 'new notice' again. Notice there are no warns
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
The patron modification request page in the staff client does show
the name and home library of a patron, but there is no way to
go to the patron record. This patch adds a link to the patron details.
Extras: changes display of patron name, so a missing firstname won't
result in an extra , showing.
To test:
- Make some update requests from different patron accounts in the OPAC
- Go to the patron modification request page in staff
- Verify a link 'Patron details' now shows on each entry and
works correctly
Followed test plan. Works as expected. QA tools OK.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Not sure the "Patron details" link is at the best place, but I don't
have something better to suggest.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
The exported CSV file from the item search didn't display the publication
year in MARC21 installations and the title always contained 'by'
even if there was no author information to display. Also the by is
not needed by MARC21 as the data should include punctuation.
This basically copies the changes done to the JSON format
on bug 13859 to the CSV include.
To test: Switch from 'Screen' to 'CSV'
- Check publication date always displays (MARC21 and UNIMARC)
- Check that for MARC21 the 'by' has been removed from the title information
- Check that for UNIMARC the 'by' only displays when there is also
an author to display
Tested for MARC21, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch makes includes/patron-toolbar.inc (the one in charge of
rendering the 'New patron' dropdown) make use of the Categories
Template Toolkit plugin to create the list of categories.
(1) To check the setup is sane:
- Go to the Patrons page
=> SUCCESS: The 'New patron' dropdown is populated
- Click on the [+] symbol on the Patron search on the top
=> SUCCESS: The Categories dropdown is populated
(2) To test the patch:
- On the checkout form, perform a patron search that
(a) returns more than one result
(b) returns zero results
- Click the dropdown menu to create a new patron
=> FAIL: Dropdown is empty
- Repeat for (a) or (b)
- Apply the patch and reload
=> SUCCESS: The dropdown is correctly populated
- Repeat (1)
=> SUCCESS: Nothing got broken
- Verify the logs
=> SUCCESS: No new warnings
- Sign off :-D
- Get a cookie
- Smile
Regards
Discussion: we might need a new bug to start cleaning stuff like this:
@categories=C4::Category->all;
if(scalar(@categories) < 1){
$no_add = 1;
$template->param(no_categories => 1);
}
else {
$template->param(categories=>\@categories);
}
but it belongs to a new bug me thinks. Well, suggestions are welcome, but this must
be fixed on stable ASAP so hurry :-D
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
There is no help for the pending on site checkouts report. This patch
adds it.
To test:
* visit pending on site checkouts
* click help
* confirm help is there and correct
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch adds the missing order from subscription help and updates basket
help.
To test:
* Visit a basket, review the help
* Click order from a subscrption, review the help
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch adds the missing discharge help file and updates the moremember file with
info on discharges.
To test:
* Visit a patron
* View and confirm help is right
* Visit the discharge page on the patron
* Confirm help file loads and is right
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch updates 3 help files for catalolging in 3.20
To test:
* Visit
* cataloging home
* cataloging a new record
* mergin bib records
* Confirm text is right and visible
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch updates the help files for 3.20
To test:
* Visit
* Main patron page
* Patron search page
* Patron permissions page
* Confirm the text is right on all three
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
In cataloguing/addbooks.tt, the line :
[% total %] result(s) found in catalog,
is not present in PO files even after an update.
I've found that the cause is the previous HTML comment line.
This patch converts HTML comment into TT comment and adds a div to have a more comprehensive string to translate.
Test plan :
- without patch
- go into <sources>/misc/translator
- run PO update for example in french : translate update fr-FR
=> the text "result(s) found in catalog" is missing from PO file : fr-FR-staff-prog.po
- restore default PO files
- apply patch
- go into <sources>/misc/translator
- run PO update for example in french : translate update fr-FR
=> You find text "result(s) found in catalog" in PO file : fr-FR-staff-prog.po
Sponsored-by: Universidad de El Salvador
Signed-off-by: Hector Eduardo Castro Avalos <hector.hecaxmmx@gmail.com>
Works as advertised. Just one msgid appear with msgid "%s result(s) found in catalog,"
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
