This module is used in C4::Members::GetPendingIssues too, but we can use
dt_from_string.
Test plan:
1/ Verify that
prove t/db_dependent/Members/GetPendingIssues.t
returns green
2/ On the patron pending issue list, verify that the issue and the due
dates are correctly displayed.
Tested together with other patches (except "Fix special cases). Worked as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Use next instead of return when generating templates.
In case patron has enabled a message type that misses a template,
next message type will be attempted instead of returning at once.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This small patch corrects the order of generating notices for issues and returns (checkout/checkin) so that borrower's notices are rendered correctly (for sms,email,etc.)
Test plan:
1) Edit SMSSendDriver syspref to use driver 'Test'
2) Edit CHECKOUT template for sms to 'SMS test'
3) select SMS for test patron's messaging prefs for item checkout
4) checkout an item
5) check the table message_queue, verify that template sms is
not used (message content is not 'SMS test')
6) apply patch, make new checkout
7) check that message_queue table now has a correctly generated
notice with 'SMS test'
For a real world test use a real SMS::Send driver and run the
cronjob process-message-queue.pl to send messages immediately.
Signed-off-by: Sophie Meynieux <sophie.meynieux@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The emails sent via SendAlerts don't take into account HTML format.
_TEST PLAN_
Before applying:
1) Change system preference "AutoEmailOpacUser" to "Send"
2) Change "ACCTDETAILS" notice to HTML and add HTML to it
3) Create a new user with your email address
4) Note how the email displays the HTML tags as plain text
Apply patch
5) Create a new user with your email address
6) Note how the email displays the email as an HTML email
For thoroughness:
7) Change "ACCTDETAILS" notice to non-HTML
8) Create a new user with your email address
9) Note how the email displays the HTML as plain text
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The UTF-8 charset in the content type is written as "utf8" instead of "utf-8"
in SendAlerts(), which causes UTF-8 characters to display incorrectly.
_TEST PLAN_
Before Applying:
1) Edit ACCTDETAILS
2) Add some UTF-8 characters
I recommend using the following website
http://www.ltg.ed.ac.uk/~richard/unicode-sample.html
In my tests, I added the samples from Hebrew, Arabic, Basic Latin,
Latin-1 Supplement, Latin Extended-A, and Latin Extended-B.
3) Set the system preference "AutoEmailOpacUser" to "Send"
4) Create a new user account with your email address
5) Note that the email in your inbox doesn't display the Unicode
characters correctly
Apply the patch
6) Create a new user account with your email address
7) Note that the email in your inbox _does_ display the
Unicode characters correctly.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If the user is already logged-in, do not trigger CAS authentication
even if there is a ticket in the parameters.
1) Authenticate to the OPAC through CAS.
2) Once redirected to your account, hit F5 or the refresh button of your browser.
3) You're logged out.
Signed-off-by: Koha Team Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Luce Barbey <luce.barbey@cirad.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Added sign of lines according to bug.
Works as described, small change.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds new fields ccode_description, homebranch_description,
holdingbranch_description, location_description and
permanent_location_description which can be used in the Label Creator
to display names/descriptions instead of codes
Test Plan:
1) Edit a layout in the Label Creator so that it includes any of these
fields. I suggest including "homebranch_description" and perhaps
"ccode_description" if you have them in your item data.
2) Add items to a batch in the Label Creator.
3) Export the batch using the layout, and view as PDF
4) Verify that you see descriptions for fields which you added
Signed-off-by: Nick <Nick@quechelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Important note: This will modify the UI.
The patron list will now be displayed in a table (instead of a select).
Test plan:
1/ Place a hold on a record
2/ Search for a patron
3/ Select a patron and submit
4/ The hold workflow should continue as previously
No behavior changes should be observed.
Works as expected.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch reverts a commit that breaks GetUpcomingDueIssues-related
tests.
This reverts commit 5ee0293ed6.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Implement correct handling of fees associated with checking out
an item.
This is associated with fee acknowledged field (BO)
To quote from the Sip2 document
" If this field is N in a Checkout message and there is a fee
associated with checking out the item, the ACS should tell the
SC in the Checkout Response that there is a fee, and refuse to
check out the item. If the SC and the patron then interact and the
patron agrees to pay the fee, this field will be set to Y on a second
Checkout message, indicating to the ACS that the patron has acknowledged
the fee and checkout of the item should not be refused just
because there is a fee associated with the item"
So there are two Checkout requests the first with BO not set to Y is
rejected but the fee amount is returned. The Second Checkout with BO set
to Y should succeed.
Added a debug log message indicating why we block a checkout
when we dont otherwise indicate
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
C4::Reserves:
* Added OnShelfHoldsAllowed() to check issuingrules
* Added OPACItemHoldsAllowed() to check issuingrules
* IsAvailableForItemLevelRequest() changed interface, now takes
$item_record,$borrower_record; calls OnShelfHoldsAllowed()
opac/opac-reserve.pl and opac/opac-search.pl:
* rewrote hold allowed rule to use OPACItemHoldsAllowed()
* also use OnShelfHoldsAllowed() through
* IsAvailableForItemLevelRequest()
templates:
* Removed AllowOnShelfHolds and OPACItemHolds global flags, they now
only have meaning per item type
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
I have tested this patch left, right and upside down for the last
several months. All tests have passed.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This change is similar to Bug 8375 which introduced ttf fonts for
labels printing in order to support diacritics and utf-8 encoding,
but this change was never implemented for patron cards.
Test scenario:
1. make sure that you have <ttf> font mapping in koha-conf.xml
2. define partron card layout, template, profile and batch
(with utf-8 chars, probably in patron firstname or surname)
3. verify that without this patch pdf export file is error message
Wide character in compress at /usr/share/perl5/PDF/Reuse.pm line 820
4. apply this patch and verify that generated pdf has correct encoding
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch is the main patch.
The "common" template is improved to allow different type of picking:
"add" or "select".
The first one appends a patron to a list, the second one selects the
patron and close the result search window.
The members/guarantor_search.pl has completly changed but is quite the
same file as acqui/add_user_search.pl. Both should exist: they don't
belong to the same module (acqui vs members), the picking type is
different (add vs select) and the columns are not the same.
The changes in the common template are very powerful, it's now possible
to list the column we want! This will be very useful for further
reusability.
Before this patch, all patrons mathing the pattern were return. Now only
the first 20 are (depends on the DataTables selected value).
For QA: This patch introduces a new template plugin "To", for now it
permits to convert a perl structure to json. In the idea, it could
permit to convert foo to bar too.
Test plan:
1/ Verify there is no regression in the guarantor search. When the
selection has been done, all data from the guarantor should fill the
form in the "main address" section.
Note that the request is done when the search input in not empty and the
user stop to write for 1 sec.
2/ Verify there is no regression on the 2 other pages where this patron
search is used: link a patron to an order and to a basket (in the
acquisition module).
Signed-off-by: Morag Hills <the.invinnysible.one@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
For every subscription we have 4 notes fields in Koha, 2 are in the
subscription itself and another 2 are in the subscription history.
When creating a new subscription, the notes fields from the
subscription get copied to the fields of the subscription history,
leading to doubled up display of notes in the OPAC.
To test:
- Add a new subscription without patch
- check manual history
- Fill in both notes fields
- Verify that the notes fields got also saved into the
subscription history (easy from the Summary tab)
- Apply patch
- Add another subscription, like above
- Verify now only the subscription notes fields are saved
- Edit subscription and notes - verify all is ok
- Edit subscription history (Planning tab) - verify all is ok
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 10807 adds a search history for authorities and bug 10862 adds the
search history on the staff interface.
This one allows the user to select the search history lines he wants to
delete.
This change is done for the OPAC and intranet interface. The user is now
allow to delete one or more lines of his/her search history.
Test plan (for intranet, opac: bootstrap and prog themes):
1/ launch some search (catalogue and authority)
2/ verify the lines is added to your search history
3/ delete one or more lines of the history and verify they have been
deleted
4/ at the OPAC: logout and do again steps 1-3.
5/ prove t/db_dependent/Search/History.t
Signed-off-by: sonia BOUIS <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Before this enh, the users to add to a basket should have the
acquisition.order_manage permission.
This patch reintroduces this behavior.
The code in acqui/add_user_search.pl was never used. The filter should
be done in the members/search service.
But it is not possible easily to filter using a sql query, so the filter
is done after. This means that we cannot use the DT pagination
(otherwise the results will become inconsistent).
Test plan:
1/ On adding patrons to a basket, verify that the search patron results contain
patron with the acquisition.order_manage permission.
2/ Verify that all patrons are return on the 'normal' patron search and
when adding patrons to an order.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch is the main patch.
This feature adds the ability to link patrons to an order.
On that way, they will be notified when the order is completely
received.
Test plan:
1/ Execute the updatedb entry and verify you have a new notification template in your table (tools/letter.pl).
code: ACQ_NOTIF_ON_RECEIV, module: acquisition
2/ You can edit it if you want
3/ Create a basket and create an order with 1 or more items
4/ Link 1+ patrons to this order
5/ Close the basket and receive the order
6/ When you have received all items for this order, all patrons attached
will be notified. Check the message_queue table to check if the letters
have correctly been added to the queue.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
A previous enhancement allows to link basket with patrons.
Next patches will use the same way to link order with patrons.
In order to avoir c/p of code, this patch refactores this part of code.
Test plan:
1/ Verify there is no regression on adding/modifying users to a basket.
(acqui/basket.pl?basketno=XXX, "Managed by", "Add user").
2/ Note that you get a friendly message if the user is already present in the
list and when the user has correctly been added to the list.
3/ Note that the list uses the member search service (ie. DataTable +
serverside processing).
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Adds a checkin operation at the beginning of the test.
Otherwise, a former test leaves the test item checked out
and this generates an error.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Added small patch to allow barcode as input in TransferSlip routine, mostly
to allow generating transfer slips where only barcode is present (aka.
javascript).
Test plan:
1) find book with <barcode> and <itemnumber>
2) generate transferslips with both:
transfer-slip.pl?transferitem=<itemnumber>3967925&branchcode=MPL&op=slip
transfer-slip.pl?barcode=<barcode>&branchcode=MPL&op=slip
and verify that the generated slips match.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Edit:
- Added tests in t/db_dependent/Circulation_transfers.t
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Passes tests and QA script.
Works with both itemnumber or barcode as described.
Tested printing transfer slips with the URL examples given
and in the UI.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When trying to execute or configure the plugin on 3.18 I got:
Template process failed: file error - doc-head-open.inc: not found at
/usr/share/koha/lib/C4/Templates.pm line 129.
Test Plan:
1) Install the Kitchen Sink plugin
2) Go to the configuration page of the plugin
3) Note the template processing error
4) Apply this patch
5) Refresh the page
6) Note the page now loads
Signed-off-by: Nick <nick@quecheelibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Nice catch Kyle, I changed it to require Ubuntu 12.04's
Sip::Configuration calls new on Account, Institution and Service
classes but does not store or subsequently use the returned objects
( which immediately go out of scope ). Their existence just obscures
the code and misleads the reader. Remobe them
Removed redundant commented out code from Configyration module which
was not serving any useful purpose
Ran Configuration.pm through perltidy to make layout more
consistent
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
* Syndetics routines include a statement to check that the returned
content from Syndetics is xml. The get_syndetics_index routine was
missing this check and so when a 'not found' html page was returned
the opac-detail page would take a long time to load whilst xml::simple
attempted to parse the large html document.
Test Plan
1. Enable Syndetics indexes on opac.
2. Head over to an opac-detail page on the opac.
3. Remove the ISBN from the same item in the staff client.
4. Reload the opac-detail page for the item noticeing a much slower
page load.
5. Apply the patch
6. Reload the opac-detail page for the item and note that it now laods
in a reasonable timescale again.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Previous comments were wrong.
Actually the main part of price values is correct.
Only some rounding and tax values are badly calculated.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12969 introduces a subroutine to centralize VAT and prices
calculation.
It should be use in the acqui/invoice.pl script.
Test plan:
0/ Don't apply the patch
1/ Create 4 suppliers with the different configurations
2/ Create a basket and create several orders
3/ Receive the items and create an invoice
4/ Go on the invoice page acqui/invoice.pl?invoiceid=XXX
5/ Verify you don't see any difference before and after applying the
patch on the invoice details table.
Note: The only different you should see is the price formating for
"Total tax exc.". Before this patch "432.10" was displayed "432.1".
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12844 removed the call to C4::Budgets::GetCurrency.
The use of this module can be completely removed from C4::Output.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It makes sense and no runtime errors found.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
The hbyymmincr autoBarcode builder looks up all barcodes that begin with
any number of letters ( the branchcode ) and a two-digit year directly
afterward ( e.g. MPL15 ), then grabs the last four digits as the
increment counter. The problem is, this does not take months into
account, so unlike the description that says the system is limited to
10,000 items a month, it is limited to 10,000 items per *year*.
This situation can easily be corrected my adding the month into the
lookup ( e.g. MPL1501 ).
Test Plan:
1) Enable autoBarcode, set to hbyymmincr
2) Catalog an item, let the barcode.pl plugin generate
the next barcode.
3) Catalog an item with the barcode MPL15009999
4) Catalog another item, use the barcode.pl plugin to
generate the next barcode.
5) Note the barcode is generated ends with '0001' instead of the
correct increment
6) Apply this patch
7) Repeat step 4
8) Note the barcode now ends with the correct increment
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jeanne Heicher <nppublib@pa.net>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Problem confirmed - the continuing number bit was not reset
to start counting from 1 again on the beginning of a new month.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Without this patch
perl -wc C4/VirtualShelves.pm
failed:
Constant subroutine C4::VirtualShelves::SHELVES_MASTHEAD_MAX redefined
at /usr/share/perl/5.20/constant.pm line 156.
Constant subroutine C4::VirtualShelves::SHELVES_COMBO_MAX redefined at
/usr/share/perl/5.20/constant.pm line 156.
Constant subroutine C4::VirtualShelves::SHELVES_MGRPAGE_MAX redefined at
/usr/share/perl/5.20/constant.pm line 156.
Constant subroutine C4::VirtualShelves::SHELVES_POPUP_MAX redefined at
/usr/share/perl/5.20/constant.pm line 156.
Constant subroutine C4::VirtualShelves::SHARE_INVITATION_EXPIRY_DAYS
redefined at /usr/share/perl/5.20/constant.pm line 156.
Subroutine GetShelves redefined at C4/VirtualShelves.pm line 103.
Subroutine GetAllShelves redefined at C4/VirtualShelves.pm line 159.
Subroutine GetSomeShelfNames redefined at C4/VirtualShelves.pm line 189.
Subroutine GetShelf redefined at C4/VirtualShelves.pm line 230.
Subroutine GetShelfContents redefined at C4/VirtualShelves.pm line 262.
Subroutine AddShelf redefined at C4/VirtualShelves.pm line 315.
Subroutine AddToShelf redefined at C4/VirtualShelves.pm line 353.
Subroutine ModShelf redefined at C4/VirtualShelves.pm line 394.
Subroutine ShelfPossibleAction redefined at C4/VirtualShelves.pm line
454.
Subroutine DelFromShelf redefined at C4/VirtualShelves.pm line 545.
Subroutine DelShelf redefined at C4/VirtualShelves.pm line 589.
Subroutine GetBibliosShelves redefined at C4/VirtualShelves.pm line 603.
Subroutine ShelvesMax redefined at C4/VirtualShelves.pm line 628.
Subroutine HandleDelBorrower redefined at C4/VirtualShelves.pm line 648.
Subroutine AddShare redefined at C4/VirtualShelves.pm line 683.
Subroutine AcceptShare redefined at C4/VirtualShelves.pm line 703.
Subroutine IsSharedList redefined at C4/VirtualShelves.pm line 731.
Subroutine RemoveShare redefined at C4/VirtualShelves.pm line 750.
Subroutine _shelf_count redefined at C4/VirtualShelves.pm line 764.
Subroutine _CheckShelfName redefined at C4/VirtualShelves.pm line 788.
C4/VirtualShelves.pm syntax OK
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It's preferable to limit the permission to delete shelves.
Apply both patches before testing, then follow this test plan
Currently a public list can only be deleted by its owner.
This means lists can exist infinitely.
This will introduce a new permission for list. With this permission, a
staff member will be allow to delete any public lists.
Test plan:
1/ Add the manage_shelves permission to a patron.
2/ Login with this patron
3/ Go on the public list view
4/ You should be able to delete all public lists
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Currently a public list can only be deleted by its owner.
This means lists can exist infinitely.
This will introduce a new permission for list. With this permission, a
staff member will be allow to delete any public lists.
Test plan:
1/ Add the manage_shelves permission to a patron.
2/ Login with this patron
3/ Go on the public list view
4/ You should be able to edit all public lists
Followed test plan. Works as expected.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The browse by last name letters on the patron search for the patron card
creator doesn't work quite right. If extended patron attributes are
disabled, it works fine, but if they are enabled, they are searched even
when using the browse last name. Thus, if a searchable attribute has a
"D" in it, and one clicks the "D" link for the last name browser, that
patron will show even if he or she has no "D" in his or her hame!
Test Plan:
1) Enable extended patron attributes
2) Add a new searchable patron attribute
3) Create a new patron with the last name "Ace"
4) Add the value "D" to the attribute for this patron
5) Browse to the patron card maker, start a new patron batch
6) Click "Add item(s)" to bring up the patron search
7) Click the letter "D" in the patron search box
8) Note that "Ace" shows in the results list
9) Apply this patch
10) Repeat step 7
11) Note that "Ace" no longer shows in the results list
12) Perform a regular search by putting the letter "D" in the "Name:"
field, and hit the "Search" button
13) Note this time the results *do* have Ace in them
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Well described for a tricky bug. Reproducible. Fixed with this patch.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
This works as described, no problems or regressions found.
Imagine this scenario: we have one record with four items. Two of those
items are checked out, one of those items is a waiting hold, and one of
those items is available. We would expect to see this on the search
results page. Instead, we will see both non-checked out items as
unavailable due to waiting holds.
This is due to a semantic issue GetReserveStatus.
C4::Search::searchResults uses GetReserveStatus to get the reserve
status of each item, but unlike all other calls to the sub, this one
passes in not only itemnumber, but biblionumber.
When no reserve is found for the available item, the subroutine uses the
biblionumber to grab what is essentially an arbitrary reserve to use for
the status. This makes no sense and this functionality should be
entirely removed from the subroutine so regressions like this will be
prevented in the future.
Test Plan:
1) Create one record with 4 items
a) check two of the items out to patrons
b) set one of the items as a waiting hold
c) leave the fourth item as available
2) Run a search where this record will be in the results list
3) Note that the results list 2 items on loan, two unavailable
4) Apply this patch, reload the search results
5) Note that the results list 1 available, 2 on loan, 1 unavailable
Signed-off-by: John Andrews <jandrews@washoecounty.us>
Signed-off-by: Sheila Kearns <sheila.kearns@state.vt.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Note: This is for the staff search result list!
Works as expected.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
C4::Acquisition::ModReceiveOrder updates the aqorders with
budget_id=NULL if no budget_id given in parameter.
Actually the same budget_id should be used.
In tests (especially t/db_dependent/Acquisition/TransferOrder.t),
ModReceiveOrder is not called with a budget_id param and set to NULL the
budget_id value.
test plan:
prove t/db_dependent/Acquisition/TransferOrder.t
should return green
Note that this bug should not appear using the interface.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The fix makes sense, and running
$ prove t/db_dependent/Acq*
returns all green. koha-qa.pl also likes it.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
There were multiple calling conventions for C4::Context's
set_userenv routine. So the following commands were used to
find discrepancies:
grep "::set_userenv" `find .`
grep "\->set_userenv" `find .`
The first grep demonstrated that the smaller change is from
:: to -> as only C4/Auth.pm, installer/InstallAuth.pm, and
t/db_dependent/Circulation.t would need to be modified. This
patch corrects C4::Context's set_userenv routine to be object
call based (use ->) by using a shift to ignore the first
parameter, and modify the three files found with :: calls.
As the result of trying to roll a distribution,
t/Circulation_barcodedecode.t was discovered to be faulty. The
cause being incorrect parameters! This was hidden when there
was no shift in the set_userenv routine. However, with its
correction, the test broke.
This led me to read the POD documentation for the function
set_userenv in C4::Context and realize it was outdated as
well. It has been revised to match the current version of
the function.
Then intentionally bad parameters passed to the set_userenv
routine in C4::Context were hunted down. The biggest problems
were missing surnames or branch names.
Rebase required because of shibboleth change in C4/Context.pm
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
There was an instance of the pragma missed which meant the the original
patch set didn't actually solve the problem in a large number of cases
This patch adds in the relevant statement.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To Test:
1) Enable the system preference SessionRestrictionByIP
2) Change your system IP. It will not checkout your system IP or signout.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
In this special case (the suggestion is linked to "all funds"), the
budgetid value should be NULL in DB.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes old and new tests.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds the ability to search orders using the basket creator.
Test plan:
- go on the order advanced search form (acqui/histsearch.pl)
- use the autocomplete input to search patrons
- launch the search and verify the results are consistent with the
values you have filled.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Having $ordernumber as the parameter in a function which is
handling suggestions and it is used as a suggestion id is
confusing to the coder and person trying to read the code.
This patch corrects the confusion.
REVISED TEST PLAN
-----------------
1) perldoc C4::Suggestions
-- notice it says ordernumber for the GetSuggestions example.
2) Ensure you have CPL in your branches table.
3) prove -v t/db_dependent/Suggestions.t
-- if you have more than 8 itemtypes in your database, two
tests at the end will fail, but that is not relevant to
the modified GetSuggestions code.
4) apply patch
5) perldoc C4::Suggestions
-- notice it is corrected now.
6) prove -v t/db_dependent/Suggestions.t
-- it should run with the same results as in step 3.
That is, if you have 8 itemtypes, all pass, otherwise
those two tests fail.
7) run koha qa test tool
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan:
1. Add 4 item search fields (in Administration › Items search fields):
a. 1 biblio field linked to a DB field
b. 1 biblio field not linked to a DB field
c. 1 item field linked to a DB field
d. 1 item field not linked to a DB field
2. Make sure you have some data in those fields to search on.
3. Go to item search page and do a search using these new fields, make
sure the result is correct.
Signed-off-by: Nick <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
