Converts item plugins to new style (with builder and launcher).
See also bugs 10480 and 13437.
The following plugins have been adjusted:
barcode_manual.pl
barcode.pl
callnumber-KU.pl
callnumber.pl
cn_browser.pl (Added license statement too)
dateaccessioned.pl
macles.pl
stocknumberam123.pl
stocknumberAV.pl
stocknumber.pl
Test plan:
Connect the plugin to an item field.
Verify that the plugin still works.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested if all plugins compile okay.
Ran most of them thru FrameworkPlugin.t.
Tested them in the item editor.
Note: the form for macles.pl comes up, further hard to test.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When you use the 006 builder to view the existing values in the 006
tag, Koha is not pulling these existing values into the builder
window. Instead, Koha appears to be using defaults.
To reproduce:
1. Open a record in the editor
2. Switch from BKS to another material type.
3. Change as many settings as possible.
4. Close plugin.
5. Reopen plugin - notice your selections are not shown.
Trivial patch, heavilly inspired by Bug 9093.
To test:
1. Apply patch
2. Ensure that issue described above is no longer reproductible
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The more correct solution is fix that template file.
However, in the mean time, this works.
TEST PLAN
---------
1) find a record
2) edit record
3) click value builder for 007
4) change everything to pipes as much as possible.
(use Motion Picture to get all 00-22 values)
5) save
-- should save just fine.
6) click the value builder again
-- OOPS! Bad reload.
7) prove t/db_dependent/FrameworkPlugin.t
-- NOISY 007 messages.
8) apply patch
9) click the value builder again
-- good reload
10) prove t/db_dependent/FrameworkPlugin.t
-- No noise related to 007.
11) run koha qa test tools.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
It is similar to unimarc_field_210c_bis, but searches in
biblioitems.collectiontitle instead of biblioitems.publishercode
Signed-off-by: Laurence Rault <laurence.rault@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch replaces the occurrences of
my @foo = $cgi->param('foo');
with
my @foo = $cgi->multi_param('foo');
perl -p -i -e
's/^(\s*my\s*@\w+\s*=\s*)\$(cgi|input|query)\->param\(/$1\$$2\->multi_param\(/xms'
**/*.pl
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
subroutines should not take $dbh in parameter.
C4::Biblio::TransformMarcToKoha has it and does not use it.
Test plan:
Look at the patch and confirm that all occurrences of
TransformMarcToKoha have been modified.
Signed-off-by: Jacek Ablewicz <abl@biblos.pk.edu.pl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch adds the dbrev in atomicupdate, updating the marc structure
for existing installations. (New installation in previous patch.)
And it removes the obsolete plugin files.
Test plan:
Run upgrade. Verify that new plugin is linked (for bib and auth).
Check plugin in editor.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Plugin tested, added to 040a/c/d
Test pass
No koha-qa errors
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch copies code from marc21_field_003.pl to create marc21_orgcode.pl
for more generic use. Other fields like 040c or 040d should use it too.
Note: The plugin is used for authorities too (003, 040a).
One behaviour change is added: If the corresponding field is already
filled, it will not be overwritten.
In the unit test marc21_orgcode already replaces marc21_field_003.
Test plan:
[1] Attach plugin marc21_orgcode to a field (e.g. 003) and test it in
the MARC editor of Cataloguing or Authorities.
[2] Check if a value is not overwritten any more.
[3] Run unit test t/db_dependent/FrameworkPlugin.t; don't be distracted by
the noisy warnings of marc21_field_007.pl. They will be addressed on
another report.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch mainly replaces C4::ItemType->all with
Koha::ItemTypes->search.
Test plan:
At the places where the C4::ItemType module was used, confirm there is
no regression:
- acqui/neworderempty.pl
- catalogue/itemsearch.pl
- admin/item_circulation_alerts.pl
and the 2 cataloguing plugins:
- marc21_linking_section.pl
- unimarc_field_4XX.pl
QA step:
prove t/db_dependent/HoldsQueue.t should return green
Note that the tests were buggy.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
These 2 subroutines are now not necessary anymore, we can use
Koha::Authority::Types to retrieve the authority types.
This patch won't be easy to test. Indeed, a lot of file are updated.
To test it I would suggest to focus on the merge authority
You should also confirm that the authtypecode and the authtypetext
values are correctly displayed when navigating in the authority module.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Some perl scripts have 644 permissions instead of 755.
I think some are special like install-CPAN.pl.
This patch corrects some common perl scripts.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The builder of this plugin includes a window.open call with the name
parameter: \"marc21_field_7\"+ event.data.id +\"\"
Note that this is not the name of the new window.
This trivial patch adjusts this unusual name by tag_editor like other
plugins.
Test plan:
Attach marc21_linking_section to 773$9.
Click on the Tag editor button.
If it opens, it still works :)
Note that the name of the popup is still:
Koha > Cataloguing > plugin for links
Signed-off-by: Fredreic Demians <f.demians@tamil.fr>
Plugin still working, with a valid pop-pup window id.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
A closer look at this plugin revealed the same things as earlier:
[1] Since the click redirects to leader, the launcher is not used.
In this case no template file existed.
[2] Leader_video does not use Focus while leader does.
This patch removes 'all' traces of leader_video.
It includes a tiny db revision for those brave people using it. The only
behavior change for them is the focus change.
Test plan:
[1] Run the db revision.
[2] Check if the leader plugin still works as expected.
[3] Git grep on marc21_leader_video. Ignore atomicupdate. No PO files :)
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
A closer look at this plugin revealed the same things as the previous
patch for leader_book.
[1] Template leader_computerfile is not used.
[2] The unused template is not up-to-date either.
[3] Leader_computerfile does not use Focus while leader does.
This patch removes all traces of leader_computerfile.
It includes a tiny db revision for those brave people using it. The only
behavior change for them is the focus change.
Test plan:
[1] Run the db revision.
[2] Check if the leader plugin still works as expected.
[3] Git grep on marc21_leader_computerfile. Ignore PO files.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
A closer look at this plugin revealed the following:
[1] The leader_book builder redirects to leader.pl; the launcher code with
leader_book.tt is dead.
[2] A diff of the two templates showed that most changes are minimal and
irrelevant. Some updates to leader have not been incorporated into
the unused leader_book.
[3] Leader_book does not use Focus while leader does.
This patch removes all traces of leader_book :)
It includes a tiny db revision for those brave people using it. The only
behavior change for them is the focus change.
Another small change: we do not need Search.pm in marc21_leader.
Test plan:
[1] Run the db revision. If you had some field attached to leader_book,
it should be gone.
[2] Check if the leader plugin still works as expected.
[3] Run the FrameworkPlugin unit test. Ignore warnings from field_007.
[4] Git grep on marc21_leader_book. You will only find references to
PO files in misc/translator.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch makes the following changes to achieve that:
[1] Use Upload.pm in stage-marc-import.pl, upload-cover-image.pl,
offline_circ/process_koc.pl and enqueue_koc.pl.
[2] A new file-upload.js replaces file-upload.inc in the associated template.
We now use ajax to get progress figures instead of launching perl script
upload-file-progress.
The js changes now also allow for aborting a file upload.
[3] Adds a tools/upload script and template. It allows to upload multiple
files at once.
[4] Makes upload-file return error messages in JSON. For a multiple upload,
we could have some files with errors and others without errors.
The upload is now marked as Failed only if there was no upload at all.
[5] The upload plugin is converted to use tools/upload with plugin param.
Deleting an upload is now presented via the search results form.
NOTE: In editing the process_koc.tt I noticed that the form enqueuefile was
hidden and no longer used (with associated code in process_koc.pl). When a
file has been uploaded, I display the form again (with the Apply directly
button). The code still works.
NOTE: We fix an error in upload-file from one of the patches of bug 6874.
The userid of the Koha admin user is passed to haspermission, but we
should pick the userid from the session.
NOTE: Bug 14686 will add a specific permission for tools/upload.pl, and
will add the tools/upload script to the Tools menu.
For now, you need edit_catalogue to start upload.pl and you will
additionally need a permission like upload_local_cover_images
to successfully upload a new file.
Test plan:
[1] Upload a marc file in stage-marc-import. (This is temp storage.)
[2] Check new entry in table uploaded_files. Look for the file in your
temporary directory (/tmp ?), subfolder koha_upload.
Bonus: Remove permissions on this subfolder. Retry, check error and
restore permissions again.
[3] Upload another (larger) file and abort the upload. Check table and
directory again. You should have a partial file, but no record.
[4] Verify that Stage for import still works as expected.
[5] Test Upload local cover image. (Enable OPACLocalCoverImages.) You can
test an individual image or a zip file including images and a file
called datalink.txt (with lines biblionumber,filename).
[6] Test uploading a offline circulation file:
Enable AllowOfflineCirculation, and create a koc file (plain text):
Line1: Version=1.0\tA=1\tB=2
Line2: 2015-08-06 08:00:00 345\treturn\t[barcode]
Note: Replace tabs and barcode. The number of tabs is essential!
Checkout the item with your barcode.
Go to Offline circulation file upload. Upload and click Apply directly.
Checkout again. Upload again, click Add to offline circulation queue.
[7] Upload three files via tools/upload.pl with a category and marked as
public. Check the results in the table.
Verify that you can download the file in OPAC without being logged in.
[8] Pick one new file and one of the files of step 7. Upload them in the
same category. One upload should succeed. Check for reported error.
[9] Connect upload.pl to field 856$u.
Goto Cataloguing editor.
In an empty 856$u, click the tag editor. Upload a file and click Choose.
Save the record. Open the record in the OPAC and click the link.
Copy this link to your clipboard for next step.
[A] Go back to editor. Click the tag editor on the same 856 field.
Choose for Delete.
Open the link in your clipboard again. Error message?
[B] Check the process of upload, search, download and delete of an upload
with some diacritical characters in the filename. (Bonus points for
adding special chars in the category code.)
Note: You can add categories via authorized values, UPLOAD key.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Bug 14321: [QA Follow-up] Perltidy upload.pl
Run perltidy -pro=xt/perltidyrc on tools/upload.pl.
No other changes.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan: See Bugzilla.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Add subfields l, n and o for better UNIMARC compliance
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Note: I just did a code audit here, as I don't know enough about
UNIMARC to know if the 4XX fields should have these subfields.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The cn_browser.pl cataloguing plugin only searches for used callnumbers
on the bibliographic database. There is no need for this plugin to
require special permissions besides access to the catalog.
To test:
- Link the cb_browser.pl cataloguing plugin to 952$o in your favourite cataloguing framework
- Login with a superlibrarian user
- Try the plugin
=> SUCCESS: you can use it
- Login with a user that has the full 'tools' permission
- Try the plugin
=> SUCCSES: you can use it
- Login with a user that doesn't have full 'tools' permission
but has the normal catalogue and cataloguing permissions.
- Try the plugin
=> FAIL: you are requested to login with a different user
- Apply the patch
- Retry
=> SUCCESS: you can use it
- Sign off :-D
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
These 3 should use C4::Output not to explode.
Test plan:
Link the plugins with the correct fields
They should not log an error when calling them
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
The cataloguing plugin stocknumberam123.pl is broken and no
longer generating numbers - this patch fixes it.
To test:
- Link a subfield to the plugin - usually it's 952$i or the UNIMARC
equivalent in your MARC frameworks
- Create a new item, set the inventory number to: A 0000000002
- Start to catalog another item, enter A into inventory and
- Enter A as stocknumber and activate the plugin by clicking on
... at the end of the field
- The number will not get added - Firebug shows an error:
Undefined subroutine CGI::output_html_with_http_headers
- Apply patch
- Verify numbers are now generated and no errors are shown
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
The cataloguing plugin stocknumberAV.pl is broken and no
longer generating numbers - this patch fixes it.
To test:
- Link a subfield to the plugin - usually it's 952$i or the UNIMARC
equivalent in your MARC frameworks
- Set up a new authorised value INVENTORY, the code is an uppercase
prefix - "B"
- The Descriptions is your starting number - 1
- The OPAC description remains empty
- Catalalog an item
- Enter B as stocknumber and activate the plugin by clicking on
... at the end of the field
- The number will not get added - Firebug shows an error:
Undefined subroutine CGI::output_html_with_http_headers
- Apply patch
- Verify numbers are now generated and no errors are shown
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch does:
[1] Some trivial template changes. Modified some comments (POD lines).
[2] Converted plugin to new style.
[3] Table updates: renames id to hashvalue, adds a autoincrement id,
adds filesize, timestamp, owner and category.
RM: This db rev is in a separate sql file in atomicupdate.
[4] Code references to computed hash renamed to hashvalue instead of id.
[5] Removed some code pertaining to exposing upload dir structure. The user
now may choose a category; the uploader takes care of storage.
The list of upload categories is now taken from authorised values; this
might become a separate table in the future. (If there are none,
the upload process creates one default fallback.)
We can add e.g. permissions later, subdir structure, etc. (So dir will
not necessarily be category anymore.)
Test plan:
[1] Run the db revision.
[2] Upload new file. Check the record in the table. Delete it again; check.
[3] Run t/db../UploadedFiles.t.
[4] Run t/db../FrameworkPlugins.t -incl cataloguing/value_builder/upload.pl
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This adds a dependency on bug 5010, in that the protocol is
assumed in the OpacBaseURL system preference. It also adds
improved error handling.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This updates the license text for
- C4/UploadedFiles.pm
- cataloguing/value_builder/upload.pl
- opac/opac-retrieve-file.pl
to GPL v3 as per the
http://wiki.koha-community.org/wiki/Coding_Guidelines#Licence
text.
TEST PLAN
---------
1) Don't apply this patch as part of 6874.
2) Run the koha qa test tool.
-- It will FAIL for those three file.
3) Apply this patch
4) Run the koha qa test tool.
-- License problem is corrected, no FAILs.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Two problems were discovered while doing a fresh install
of Koha. These problems in the kohastructure.sql file are
addressed with this patch.
Clicking the plug-in icon should cause the popup window
to refocus. This adds the refocus code to the upload.pl file.
The path to the jquery.js script was wrong in the
upload_delete_file.tt file. Changed [% themelang %] to
[% interface %].
If a user clones 856$u after uploading a file, deletes the file,
and then clicks the plugin icon on the first 856$u, this will go
immediately to the upload screen with an informative error
message.
After some validation was added, it was extended to include
other cases. This serves to patch 6874 to a state where sign
off should be possible.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch adds a javascript and a server-side checks
Test plan:
1/ Choose a file, leave the radios not selected and submit
2/ You have a javascript alert which prevents form to be submitted
3/ Disable javascript and repeat step 1
4/ Form is submitted but form is redisplayed with an error message
telling you to choose a directory.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
* Renames uploadPath to upload_path to follow the standard naming
conventions in koha-conf which use underscores rather than camel case
* Remove reference to intranet-tmpl and replace with [% interface %]
required to pass qa
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Add unit tests for C4::UploadedFiles and move a variable
declaration at subroutine level instead of file level.
Add dependency to Test::CGI::Multipart
Still works, and the newly-provided unit tests have good test
coverage:
C4/UploadedFiles.pm 90.7 65.0 66.7 100.0 100.0 0.2 86.4
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Squash of the following commits:
return with explicit undef removed
Follow-up for PBP fixes
follow-up fix POD syntax
follow-up jquery has moved
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended: removed POD changes in Biblio.pm while rebasing.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
New cataloging plugin upload.pl and new system preference 'uploadPath'.
upload.pl provide a way to upload files on the server and store a link
(url) to it in MARC
uploadPath is the absolute path on the server where the files will be
stored. It's possible to have a hierarchy of directories under this path
and the plugin will allow to choose in which directory to store the
file.
Stored value in MARC subfield looks like this:
<OPACBaseURL>/cgi-bin/koha/opac-retrieve-file.pl?id=<SHA-1 of the file>
So both 'uploadPath' and 'OPACBaseURL' sysprefs have to be set for this
plugin to work correctly
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Slightly amended/simplified the patch during QA: The changes to
GetMarcUrls are not really needed, and would have needed some
attention. Another link text can be supplied by the plugin too.
This also reduces the need for changes in basket.pl,
MARCdetail.pl, detail.pl, opac-basket.pl and opac-detail.pl.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Edit: more meaninfull commit subject
When searching for multivolumes titles, UNIMARC 4xx field plugin
displays the title of the biblios (200$a), without giving info about
volumes (200 $h $i). It neither doesn't display $e (subtitle) info which
could greatly help to disambiguate search result.
The displayed title is supposed to link to a biblio record view (MARC /
normal). It doesn't work.
TO TEST:
- On a UNIMARC Koha, add a new biblio record
- Call the 4XX plugin from 461/463 field
- Search for a biblio record which contains 200$e, and/or 200$h and/or
200$i subfields.
- You get a result list, with two issues:
1. $a, $h & $i aren't displayed
2. Biblio title is not a link
- Apply the patch, and repeat previous steps.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
I got a link on fulltitle, but in 'ahie' order (not aehi)
Fixed some tabs.
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
The builder contains js functions with a parameter like subfield_managed
or i or something similar. This parameter contains the html id of the
field corresponding with the plugin.
With the functionality of Koha::FrameworkPlugin in place, we can eliminate
one js function call and get the same id via the event passed in. Note
that this actually makes the function a 'real' event handler.
Also note that in many cases this parameter was not used but the id
was borrowed from a perl variable like $params->{id}. If the field is not
cloned, this is not a problem. But some fields can be cloned and should
not use the static perl value but should get it from the event.
Test plan:
Look for js errors when loading the marc editor.
Since the Focus or Click event code has been touched for most marc21
plugins, move your cursor into the field or click on the tag editor
button. Verify that the focus event updates the correct field or the
click event correctly launches the plugin AND the value comes back into
the right field.
Bonus: Attach a plugin with popup (like leader) to 040$d. Clone this field.
Verify that the two launch buttons operate on the correct value.
(This resolves a current bug.)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Checked all 15 plugins.
Plugin marc21_linking_section seems to work, but I could not get it to pass
back something useful into my field. (Same without this patch.)
Tested the clone button with leader on 040d.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
All seems to work, no errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch converts marc21 plugins to new style by making the following
modifications:
[1] Replace use strict with use Modern::Perl. This implies that we now
re-enabled warnings. There are no redefine warnings anymore, but note that
we need to silence some warnings from individual plugins that were covered
by disabling the warnings pragma until now. Silencing these individual
warnings is outside the scope of this report.
[2] Sub plugin_javascript is replaced by an anonymous subroutine $builder.
[3] The parameters of $builder are combined in a params hashref. In most
cases we only need $params->{id} for the function name.
[4] Javascript function Clicxxx is renamed to Clickxxx.
[5] The builder does no longer return function_name.
[6] Sub plugin is replaced by subroutine $launcher.
[7] The parameters of $launcher are combined in a params hashref. We only
use $params->{cgi}. Mostly we save that to $input. One exception: $query.
[8] The plugins returns a hash with $builder and/or $launcher.
Test plan:
[1] Run t/db_dependent/FrameworkPlugin.t -incl cataloguing/value_builder/
marc21*.pl. This should catch compile errors and general problems when
building or launching these plugins.
NOTE: You will see several initialize warnings from individual plugins that
were hidden until now by disabling warnings. This is fine; we will be
able to address these warnings now on new reports.
[2] Check behavior of several plugins in the marc editor.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Checked all marc21 plugins. Attached unused plugins to some field.
Some plugins (unused by default) may need some further attention, but
also outside the scope of this report.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
New warnigs, but all seems to work.
No errors.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
marc21_field_003.pl: copy-pasta comment about date removed
marc21_field_005.pl: commented use removed
marc21_field_006.pl: old/irrelevant pod lines
marc21_field_007.pl: old/irrelevant pod lines
marc21_field_008.pl: old/irrelevant pod lines, move sub par line twice
marc21_field_008_authorities.pl: whitespace, old/irrelevant pod lines
marc21_field_040c.pl: two commented lines removed
marc21_field_040d.pl: whitespace, commented lines, old/irrelevant pod
marc21_field_245h.pl: whitespace
marc21_linking_section.pl: relocated some comment lines, and replaced a new
CGI object by the one passed in via the plugin launcher (agreed, this may
not be so trivial as the other changes)
Test plan:
These (trivial) changes are hard to test.
Pick a few plugins and verify that behavior is not changed in the marc
editor.
For the brave: Try marc21_linking_section.pl.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tried marc21_linking_section.pl :)
(ling plugin to 773$9, create new record, search for parent and check values inserted)
No errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Preliminary work on marc21_field_008.pl and 008_authorities.pl.
Moving $dateentered en $defaultval to lower scope level.
date_entered is a new sub (in a module); sub Field008 has been reduced to
one line.
Added a trivial unit test for date_entered.
Note: the format used in date_entered could be added in DateUtils, moving
this logic to a better place.
Test plan:
Use both plugins in the marc21 editor (biblios/authorities).
Run the adjusted unit test.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Both plugins works, no errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Preliminary work before converting to new plugin style. Several files still
contained tabs or had strange indentation.
Perltidied: marc21_linking_section.pl
Perltidied: marc21_field_007.pl
Perltidied: marc21_leader_authorities.pl
Perltidied: marc21_leader.pl
Perltidied: marc21_leader_book.pl
Perltidied: marc21_leader_computerfile.pl
Perltidied: marc21_leader_video.pl
Test plan:
Run perltidy -pro=xt/perltidyrc on marc21_linking_section and compare.
Try another one too :)
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Minor differences on comparison :)
No errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
change table id in css file
+ C4::Output is used (Undefined subroutine
CGI::output_html_with_http_headers)
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
When editing an item, the call number browser search for existing call number. If it shows a line is green between two calli numbers, the call numbers searched is available. If the call number is highlighted in red, it means that it already exists. This can be used to avoid repeated call numbers in your collection.
The call number browser also shows its position relative to the rest of the collection.
Sponsored-by: CCSR
To test :
1) Go to MARC bibliographic framework
Home › Administration › MARC frameworks
2) Click in MARC structure (Default framework)
3) Search field 952 and click in subfields
4) Edit subfield o (Full call number)
5) Click Display more constraints
6) In Others Options, Plugin, Choose cn_browser.pl and save changes
7) Search a record and edit its items
Validate : three points (…) beside Full call number input
8) Click in …
Validate : if it can not find the given call number, a green line is shown. Otherwise, the given call number is highlighted in red.
Followed test plan. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Magnus <magnus@enger.priv.no>
Works as advertised. QA scripts pass.
Tested together with other patches. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Bug 13364 - fix datatables.inc
http://bugs.koha-community.org/show_bug.cgi?id=13364
Signed-off-by: Magnus <magnus@enger.priv.no>
Works as advertised. QA scripts pass.
Tested together with other patches, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Bug 13364 - Add a call number browser in item edition page - QA fixed
Tested together with other patches.
Signed-off-by: Marc Véron <veron@veron.ch>
Bug 13364 - Add a call number browser in item edition page - QA fixed II
Tested together with oter patches.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
http://bugs.koha-community.org/show_bug.cgi?id=9987
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch fixes the pod errors on those two files by removing the pod
section that actually does not add anything useful.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
