Claire Gravely seemed to be a cut and paste error.
June 3 better matches git log.
Three other names in history are in about as well.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
For consistency we should not only add firstnames to the list of
developers in about.tt and history.txt.
Adding some surnames with the help of git log and Bugzilla. Also
corrected a closing li tag.
Note that I did not find one surname: Natasha of Catalyst Academy.
Probably Chris could add that missing piece.
NOTE: Natasha piece still needs clean up.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Some librarians would like to be able to add notes to deleted order
lines to keep track of data such as what title the order line was for.
For some reason ModOrder dies if a biblionumber is passed in, even
though it does not use biblionumber and does not need it to exist in any
fashion! This limitation should be removed.
Test Plan:
1) Create a basket with an orderline
2) Cancel the order / delete the record
3) Click the "Add internal note" link for that order line
4) Fill in a note and click "Save"
5) Note the error
6) Apply this patch
7) Repeat steps 3-4
8) Note this time the note is saved!
Signed-off-by: Claire Gravely <c.gravely@arts.ac.uk>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
Trigger
/opac-imageviewer.pl?biblionumber=14&imagenumber=7"><sCrIpT>alert(42)<%2fsCrIpT>
=> Without this patch you will see the JS alert
=> With this patch applied you won't see it
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To verify:
- Set syspref 'EnhancedMessagingPreferences' to 'Allow'
- In staff client, go to a patron's detail page
- Edit Patron messaging preferences (using link below table)
- Save
Result: Form does not save, stays open
JavaScript error in intranet-tmpl/prog/js/members.js line 107
TypeError: document.form.password is undefined
To test:
- Apply patch
- Repeat steps above
- Verify that messaging preferences save as expected
- Verify that other patron modifications work as before
NOTE: remember to force reload of the javascripts.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
1) Open up a record in Rancor with an itemtype besides the first in
the list ('BK' in the sample itemtypes).
2) It will show "Book" instead of the correct itemtype.
3) Apply patch, reload the page.
4) The correct itemtype should now show.
NOTE: The scope is only 942$c. This corrects that.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To reproduce:
- Go to staff client Home > Patron
- New patron
- Choose a category and fill form, submit
Result: Form reloads, patron data are not saved.
To test:
- Apply patch
- Repeat steps above
- Verify that patron data are saved and the new patron's
detail page displays
- Try to enter a duplicate patron (e.g. same surname, firstname
and birthday as above)
- Verify that a duplicate message appears
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This subroutine has been added by
commit 5904681fac
Date: Wed Mar 19 10:11:12 2008 -0500
CleanBorrowers fixing.
but has never been used.
It can be removed safely.
Test plan:
git grep GetBorrowersNamesAndLatestIssue
should not return any results.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
C4::Members::checkuniquemember was not really nicely written, was only
used once and was not covered by tests.
I think it does not make sense to keep such complexity and have this
code in the subroutine/method.
Looking at this patch it seems that what this subroutine did can be done
easily in the pl script in few lines.
Test plan:
1/ Create 2 organisations with the same "surname": you should get a
warning.
2/ Create 2 patrons (non-organisation) with the same
surname/firstname/date of birth, you should get a warning
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
Add new rule to the "Automatic item modifications by age" tools
(tools/automatic_item_modification_by_age.pl) and make sure the columns
of the biblioitems table are correctly displayed in the 'Conditions'
dropdown list.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
Add new rule to the "Automatic item modifications by age" tools
(tools/automatic_item_modification_by_age.pl) and make sure the columns
of the items table are correctly displayed.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
Import some patrons (tools/import_borrowers.pl) and make sure it imports
the patrons correctly.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Currently we have 3 subroutines to retrieve the columns of tables:
C4::Members::columns, C4::Items::columns and
C4::Items::biblioitems_columns.
It is easier to have a Koha::Objects->columns method to provide the
different classes to retrieve their related column names.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1) Go to Authority Search and do a search
2) Notice that there is a Full Heading column that has 'View full
heading' links. These take up a lot of space and don't mean a lot to
the user
3) Apply patch and refresh
4) Notice that the the Full Heading column is gone and there is now a
Details column next to the authorities. Confirm the link takes you to
the expected authority detail page.
Sponsored-by: Catalyst IT
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch moves the code from C4::Members::changepassword to
Koha::Patron->update_password
Test plan:
Change your password at the OPAC and the staff interface
This should work as before
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
I rebased this on top of 16849 because they were conflicting.
Tests pass, code looks good (as usual) and I checked both OPAC
and staff password change work as expected.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In order to move IsMemberBlocked to Koha::Patron it makes sense to move
the code from Koha::Patron::Debarments::IsDebarred to
Koha::Patron->is_debarred.
Test plan:
1/ Add a restriction to a patron
2/ make sure he is not able to checkout items any more
3/ Make sure he cannot get a discharge
4/ Put a hold and make sure you get "Patron has restrictions"
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1 - Select a batch of patrons (via list, saved file, and cardnumber
entry)
2 - Verify you cannot edit 'opacnotes' field, nor can you see
'borrowernotes' field in table, though you can edit it
3 - Verify editing works as expected
4 - Apply patch
5 - Select a batch via each method as above
6 - Note both note columns display in table
7 - Note that you can edit or clear the opacnotes field as expected
8 - Verify other feautres work as previously
Sponsored by:
Lancaster Theological Seminary (https://lancasterseminary.edu/)
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch updates the style of progress bars to make them a little
nicer. Progress bars in the staff client are not built in a consisten
way. Some have been updated to use the <progress> element and some have
not. This patch improves some styling common to both kinds.
Other changes:
- Redundant in-page CSS has been removed from many pages.
- An invalid "min" attribute has been removed from several instances of
<progress>.
- Corrected capitalization.
- Fixed incorrectly quoted attributes.
- Added missing form "action" attributes.
To test, clear your browser cache if necessary. Apply the patch and
test uploads on the following pages:
- Circulation -> Offline circulation file upload
- Tools -> Batch item modification
- Tools -> Batch record modification
- Tools -> Stage MARC records for import
- Tools -> Manage staged MARC records
- Tools -> Upload local cover image
- Tools -> Upload
In all cases, progress bars should look improved and work correctly.
Test Tools -> Batch item deletion. Unused background job handling markup
has been removed. Deletion processing should work correctly.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
EDIT: Comment 2
EDIT2: using noreport variable (Comment 5)
To test:
1) Ensure you have no items overdue
2) Go to Circ -> Circulation reports -> Overdues
3) Notice empty table, '0 items overdue' heading
4) Ensure syspref FilterBeforeOverdueReport is set to 'Don't require'
5) Apply patch and refresh page
6) Notice empty table is no longer showing and page says "There are no
overdues"
7) Apply a filter to search
8) Page now says "There are no overdues matching your search" with a
link to reset filter.
9) Click Reset filter -> confirm any filters you applied are cleared.
10) Set FilterBeforeOverdueReport to 'Require' and refresh overdue
report
11) Page should say "Please choose one or more filters to proceed"
12) Check out an item to a member, ensure due date is a date that has
passed (i.e. yesterday)
13) Refresh overdue report page
14) Page should still say "Please choose one or more filters to proceed"
15) Set FilterBeforeOverdueReport to 'Don't require'
16) Confirm table now shows correctly with '1 items overdue' heading
etc.
Sponsored-by: Catalyst IT
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1 - Add some course reserves
2 - View the table in staff and opac, there is no column for author or
link
3 - Apply patch
4 - You shoudl see these columns
5 - Link should contain item uri if present, fallback to title 856$u,
then be blank if niether
Sponsored by:
Southeastern Wisconsin Information Technology Exchange, Inc (SWITCH)
(http://caspian.switchinc.org/)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Might be good to add this table to the column visibility tool if you
plan to add more columns.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Remove fa-ban according with QA comment 4
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Add Font Awesome Icons to:
- "Select/Clear all" links to pay.tt (Pay fines tab)
- "Filter icon" in "filter paid transactions" to Accout tab (boraccount.tt)
- "Trash icon" to Remove option in "Manual restrictions"
(borrower_debarments.inc) also add "Ban and plus icon" to "Add manual restriction"
To test:
-Apply patch
-Select a patron who has fines
-Go to "Fines->Pay fines" tabs and see the icons in "Select/Clear all"
-Choose the "Account" tab and sse the icon in "Filter paid transactions"
-Select the "Check out" tab and go to "Restrictions"
-Add a manual restriction and notice about the two new icons fa-plus and fa-band
-See the new button btn-mini and the fa-trash icon
-Verify that all works as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Modify JS script to all templates for z3950_search.tt and reduce the
redundant code
This patch propose:
-z3950_auth_search.tt has various onclick events used in links.
Also fix: acqui/z3950_search.tt and cataloguing/z3950_search.tt
-Trigger onclick events via JQuery .on()
-Make a separate .js and .inc file
-Reduce the number of line and redundant code
-Also add Font Awesome Icons to "Select/Clear all" and "Clear search
form" links
To test:
1-Apply bug 16600 on top
2-Apply patch
3-Go to Authorities > click New from Z39.50
4-Fill some fields and click in "Clear search form" link
5-Search under "Dalton" or another author that launch too many headings
6-Clic in some heading and notice the dialog open, test: "Preview MARC",
ISBD (when showed), "Import" and close the dialog "X". Use the
"Import" from table too.
7-Use the "next/previous page" button, change "Go to page" to number in and
out of the range presented, also test whit a letter, etc.
Go to Cataloging > New from Z39.50/SRU
Repeat steps 3 to 6. But this time with bib records.
Go to Adquisition > Open or Create a basket and choose to "Add to basket"
button. A modal appear, chose the option "Order from external source"
Repeat steps 3 to 6. But this thime with bib records.
NOTE: The icon trash for "Clear search form" has been selected according
with module "Advanced search" there is an icon trash with link "Clear
fields" that has the same fuctionality.
For some reason the image loading-small.gif does not charge all times
when the code is get out of the template. (Fixed with this new patch)
DataTable it is specific for each template
Sponsored-by: Universidad de El Salvador
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
A long-standing typo in our apache config files:
[intranet]/search refers to search.pl (which does not exist)
This patch refers it to catalogue/search.pl
Test plan:
Run an install or copy the change from apache-shared-intranet.conf or
koha-httpd.conf to your apache config. Restart Apache and check
if http://[your staff client]/search works.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Tested by making manual changes according to the patch. Did not test a
new installation.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Add missing quote in line 152
Modify title of the page and breadcrumbs section wrong "searchfield" used
should be instead "currency.currency"
To test
-Try to delete the active and used currency, for example, my case
USD, look that appear USD' with the initial single quote missing in
message Confirm deletion of currency USD'
-Notice about the breadcrumbs section appear:
Confirm deletion of currency ''
Should appear the currency
-Try to delete another currency see the pharese look the same
-Notice about the title in both cases, there is missing the currency name
-Apply follow-up and re-test
Sing-off on followup
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch moves markup <span class="ex"> into template variables to
avoid sentence splitting.
To test:
- Apply patch
- Verify that currency administration works as before
(Home > Administration > Currencies & Exchange rates > Currencies)
- Examine code changes
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch fixes issues due to sentence splitting in
koha-tmpl/opac-tmpl/bootstrap/en/modules/opac-user.tt
Note: This is a string patch. It does not add or change functionallity.
To test:
- Examine code and verify that the text changes remove sentence splitting
and that the changes make sense.
- Log in to OPAC and verify that messages look correct
- with blocked /debarred user (with and without comment and date)
- with user who has to much fines (needs syspref OpacRenewalAllowed
and syspref OPACFineNoRenewals)
- with user who has his card marked as lost
- with user with an account that is about to expire
- with user with expired account
- with user with uncertain address information (with and without
syspref OPACPatronDetails set to Allow)
Note: Amended to make patch apply 2016-07-10 mv
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch updates the style of the suspend/resume button in the list of
holds displayed on the checkout page and on the patron detail page. The
button is now a Bootstrap-styled button with a Font Awesome icon.
To test, apply the patch and locate a patron who has holds.
- On the checkout page, view the 'Holds' tab and confirm that there is a
correctly-styled 'Suspend' button for each hold.
- Verify that the button works correctly and looks correct when a hold
has been suspended.
Signed-off-by: Arslan Farooq <arslanone@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 11325 add solved a focus on "Add item" missing in Lists page.
Since revamping of this page, the add item form exists both in page.
The one corrected by Bug 11325 is not visible because it checks a bad
var allowaddingitem instead of can_add_biblios.
This patch removes the first form and corrects the second form.
It moves the form at left part of page so that it is always shown
(usefull when there are a lot of items). It does not add the list name
after "Add item" besause it whould be huggly for long names and because
listname already exists in breadscrumbs and on top of the table.
It also adds autocomplete="off" on barcode input because there can be
problems with a scanning device.
Test instructions:
1. Create a list
2. Make sure you have an object with an assigned barcode
3. Go to the list
=> The barcode entry interface should be at left and has the focus
4. Enter the barcode and press enter (or use a scanner)
=> The item is added to the list
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
This is a nice improvement, thanks!
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Same fix as for the details page: checkouts page is very italic
when there is a restriction with a comment on the patron
account.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
A missing closing </i> causes the the patron detail page to be in all
italics if the patron has a restriction message. This patch corrects it.
To test, apply the patch and locate a patron who has a restriction
message. The restriction message should be in italics but the rest of
the page should display normally.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Rest of the page displayed normally
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 15656 removed the C4::Members::GetMemberRelatives subroutine but the
module still exports it.
Test plan:
git grep GetMemberRelatives
should not return any results.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The pref is prefixed by 'http://', but it should not when the pref is
set to an empty string.
This will fix the bug raised on bug 14790 comment 14.
Test plan:
Empty OPACBaseURL and confirm that it's save as it in DB
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
OPACBaseURL is saved up empty. Prefix http:// is not saved anymore
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Change patroncards/create-pdf.pl to redirect with an error message
instead of writing an invalid pdf that does not open in pdf viewer.
To test:
- Apply patch
- Test that pdf creator behaves as before (with valid batches and
patron lists)
- While testing, copy pdf link address from window with title 'Click
the following link(s) to download...'
- Open another staff client browser tab
- Paste link to browser address field, change batch id rsp. patron
list id to an invalid value and submit
- The window should redirect to cgi-bin/koha/patroncards/create-pdf.pl
and display an error message
- Bonus test 1: Create an empty patron list and test patron card
creation. You should get an error message as appropriate.
- Bonus test 2: Use a link with params like the following:
...create-pdf.pl?borrower_number=61&template_id=2&layout_id=1&start_card=1
Verify that you can create a pdf with a valid borrower_number and that
you get the error message with an invalid borrower number
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
TestBuilder should not generate datetime for date columns, but only for
datetime and timestamp columns.
Test plan:
Make sure the change in t/db_dependent/TestBuilder.t are consistent.
Before this patch, 1 of the 2 tests should fail.
After this patch applied, they both should pass.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This subroutine is no longer in used and can be removed safely
Test plan:
git grep ModPrivacy
should not return any occurrences.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Fines did not show on patron checkout and detail pages unless amout
was greater than syspref NoIssueCharges.
This patch fixes the logic in
koha-tmpl/intranet-tmpl/prog/en/includes/blocked-fines.inc
Additionally, it changes links to buttons and makes some small
text changes to ease translation.
To test:
- Apply patch
- Display checkout or detail page and verify proper display for
a patron who has
- no fines (no message)
- fines not exceeding syspref NoissueCharges (message)
- fines exceeding syspref NoIssueCharges (message)
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Format message as proposed in comment #8
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To reproduce:
- Go to Tools->Batch patron modification
- Submit without filling any of "Use a file", "Or use a patron list",
"Or list card numbers..." or use a patron lists with zero members
Result: Screen without any information
To test:
- Apply patch
- Repeat steps above
- Verify that you get a nice message
- Verify that the tool works as before
- with invalid card numbers only
- with valid and invalid card numbers
- with valid card numbers only
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Although mainly hypothetical, it would still be possible to get
response from the server for an acs resend request. (This exception
is allowed in MsgType::handle.)
I also noticed that the response may well be a message from an older
session still.
This patch just removes that exception by only passing login requests
to sub handle in the raw_transport loop.
Test plan:
[1] Verify normal login procedure for raw.
[2] Check a few acs resend requests in raw. They should terminate without
a response.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Removed tabs and used spaces consistently
Used 'use base' to remove unnecessary BEGIN sub and
explicit setting of ISA at application level
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Moving timeout logic to one routine (with unit test).
This further implements two suggestions from Kyle and Larry:
[1] You could use a client_timeout of 0 to specify no timeout at all.
[2] Have the client_timeout default to the timeout if not defined.
Test plan:
[1] Run t/db_dependent/SIP/SIPServer.t.
[2] Test login timeout for raw and telnet.
[3] Check ACS status message for timeout value. Should match policy
timeout from institution.
[4] Test client timeout (zero and non-zero).
[5] Remove client timeout. Test fallback to service.
[6] Remove service timeout too. Test fallback to 30 at login.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended to incorporate Srdjan's suggestion to move get_timeout to
SIPServer.pm; this requires some additional mocking in the unit test.
And even makes the test db dependent, as documented.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Most selfchecks have persistent connections and send a
periodic status request at intervals (approx every 5mins appears
the norm) The timeout was dropping connections by default every 30secs
which for the client appears as a very flakey network.
This patch adds a separate parameter client_timeout that can be
used if you do want to force a disconnect if the client sends
no requests for a period. The sample config sets it to 600, but you
can also define a 0 value meaning no timeout. If the parameter is not
defined, it will fallback to service timeout.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Restored this patch from Colin in order to separate it from the
get_timeout patch. Adjusted the commit message slightly.
The original value of 600 from Colin's earlier patch may give less
discussion than setting to 0 (no timeout) in a later proposal.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Remove the tabs causing inconsistent indentation
of sip_protocol_loop and replace with spaces
Reimplements the renaining parts of Marcel de Rooy's
original QA patch
No logic changes in this patch - layout only
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
raw_connection was not behaving correctly if an invalid string was
passed or a login failed.
It was not checking that the login succeeded ( it checked that account
existed not that it contained data and it existed even if login failed)
and so failed logins instead of aborting immediately fell through into
the sip_protocol_loop, forcing that to timeout invalid connections.
It now checks that account has id set and returns if not.
The timeout alarm is now set on the while loop, in normal running this
should not be triggered as the socket is opened and the first data
should be a login message and the while loop should only iterate once,
but lets not go into an infinite loop due to unforeseen circumstances.
I have reindented the routine as the flow was not clear (the while was
not indented at all.
Also if using Net::Server::PreFork when a new connection comes in you
may be handed the the successful login parameters from a preceding call.
Because of this you could successfully transmit transactions and Koha
would carry them out without having received a valid login ( and
possibly with the wrong account details!) We now delete any existing
account for new connections.
NB: This patch requires that the patch for bug 13807 has been applied
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended patch: Remove trailing spaces
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
