We should not cast undefined values to 0.
Signed-off-by: Andrew Isherwood <andrew.isherwood@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This was a bug I introduced. I think the fix is right, and if something
gets broken for this, it means it was making the wrong assumptions on
the data.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
After review of the code it turns out that the management permission
that has been marked as deprecated a long time ago, does not have
any function.
The patch removes all remaining code related to it.
To test:
- Make sure you have a patron with the management permission
- Apply patch
- Run database update
- Check everything still works as expected
Bonus:
borrowers.flags is recalculated for patrons with management
permission.
To check:
- Create some 'permission twins' with and without management
permission
- Note the value in borrowers.flags
- Apply patch, don't run database update
- Save permissions from GUI for one of the twins
- Note the newly calculated value
- Run database update
- Now both twins should have the same borrowers.flags value
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
0/ Do not apply the patch
1/ Confirm the new test fails
2/ Apply the patch
3/ Confirm the new test passes
4/ Test the installation process
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
[1] passing unsafe has no use since it is a scalar, removed it to unconfuse
[2] remove caching when pref is disabled
[3] caching userid removes the need for calling Patron->find each time
[4] subsequent changes in unit test
[5] cosmetic renames to move from session to daily basis (changed dev angle)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
First call going thru Koha::Patron takes about 0.0150 sec.
Subsequent calls only use caching and take about 0.0006 sec.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test Plan:
1) Apply this patch
2) Start a new session ( a private browser window works well )
3) Note the lastseen column in the borrowers table is updated
4) Browse a few pages, not the lastseen column is not updated again
5) Close the browser window and repeat steps 2-4
6) prove t/db_dependent/Auth.t
Signed-off-by: Charles Farmer <charles.farmer@inLibro.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The unique constraint on userid is handled in TestBuilder. So let's use it.
The two tests if count==$count do not make much sense anymore when we
call ->count a few lines before. The check with search_limited is enough.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Previous patch from Marcel removed the data from article_requests, I do
not think it is a good idea to remove existing data, it could hide bugs.
This patch moves the count inside the subtest block in order to have the
correct value when these tests are executed.
Previous code was broken: Koha::Patron->store does not generate a
userid, and ->search_limited did not work correctly
(Koha::Patron->has_permission returned early because of the non-existing
userid, 'return unless $self->userid;');
Test plan:
[1] Create an article request.
[2] Run t/db_dependent/ArticleRequests.t
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch fixes a regression after bug 14695.
This patch adds itemnumber and barcode as optional params in ReserveSlip used
by hold-transfer-slip.pl to generate HOLD_SLIP. This is for ReserveSlip to be
able to generate correct slips when items in multi-item holds are checked in.
Test plan:
1) activate a circulation rule with multi-item holds
2) Place two holds on same biblio for patron
3) for debugging, either use browser console to observe POST request and responses
or use info from reserves, e.g. reserve_id in the HOLD_SLIP
4) checkin two items from same biblio on pickup branch
5) note that both holds are effectuated, but reserve_id is the same on both slips
6) also note that there is no itemnumber or barcode in the requests from returns.pl
7) Apply this patch
8) repeat 2-4
9) note that reserve_id is now different on the two slips
and/or:
Run tests:
t/db_dependent/Reserves/ReserveSlip.t
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Maksim Sen <maksim.sen@inlibro.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Both biblionumber and biblioitemnumber for item were set to
biblionumber, when they don't line up tests fail
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
When a method is not allowed yet (not covered by tests), developers get
an error the is not really useful: "The method XXX is not covered by
tests!"
It would be more useful to have a stack trace in order to know where
this error come from.
Test plan:
Modify some code to display this stack trace and confirm it makes sense
to have it, i.e. it will make debug easier
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This reverts commit f489d2034b.
This commit breaks the install process when using debian packages.
Reverting as we are very close to the 18.05.00 release
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Hmm. I would have liked the opac parameter even better ;)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This is the alternative patch of Kyle's
"""
If a hold is 'waiting' for the patron to collect then the patron should
be prevented from cancelling the hold via their account in the opac.
If a patron tries to cancel the hold, Koha will give an 'are you sure'
alert and when you click Yes the page just refreshes and the hold
remains.
Staff can cancel the hold from the staff interface but they can then
action the waiting hold.
I think therefore that it is correct behaviour that a patron cannot
cancel a hold when it reaches waiting state via the opac but it would be
useful to either have a warning to prevent the cancellation or a useful
message when they attempt to do so.
The template was using a method that tells Koha if *staff* can cancel a
hold,
instead of patron.
Test Plan:
1) Set up a waiting hold
2) Try to cancel it from the opac
3) Note you cannot
4) Apply this patch
5) Reload the page
6) Note the cancel button has disappeared for found holds
"""
It sounds better to keep the ->is_cancelable method, for readability
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Victor Grousset <victor.grousset@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
t/Koha_Template_Plugin_KohaPlugins.t is DB dependent.
This patch moves it to t/db_dependent/
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Easy change, should be able to verify with code review or testing with
dummy values
To test:
1 - Put some values in baker and taylor prefs (don't need to be valid)
2 - Do a search on the opac (and have some items with isbns)
3 - Inspect the cover images links to ensure they are formed correctly
4 - prove -v t/External/BakerTaylor.t
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch reuses the method newly added to Selenium.pm and improve
existing tests.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The kohadevbox has admin/admin set, so for testing when
creating the initial superuser, if you wish to minimize
effort, use admin/admin. Otherwise, make sure to:
export KOHA_USER={whatever your user is}
export KOHA_PASS={whatever your password is}
before attempting to run the test.
Also, this test was failing because of a validation check on
the passwords requiring uppercase letters, lowercase letters,
and numbers. Changed the sample data passwords to fix.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This selenium test goes through the process of creating a category and
patron user (as is completed in the basic_workflow.t test) then the
superlibrarian used to create them is logged out and the newly created
patron user authenticates into the OPAC and staff intranet therefore testing the
authenitcation of both.
Test plan (this test plan includes how to install Selenium as well as
how to run this test, for the benefit of people who have not got
Selenium installed on their machines):
1. wget https://selenium-release.storage.googleapis.com/2.53/selenium-server-standalone-2.53.0.jar
2. vim /etc/apt/sources.list.d/firefox.list
3. Paste into the file:
deb http://packages.linuxmint.com debian import
4. sudo apt-get update
5. sudo apt-get install firefox
6. sudo apt-get install xvfb
7. Set the SELENIUM_PATH vartiable:
SELENIUM_PATH=/home/vagrant/kohaclone/selenium-server-standalone-2.53.0.jar
8. Xvfb :1 -screen 0 1024x768x24 2>&1 >/dev/null &
9. DISPLAY=:1 java -jar $SELENIUM_PATH
Note: This will start up the selenium server. Everytime you want to shut
down this terminal window and want to restart Selenium just run the step
9 command to restart the Selenium server
10. Open a new terminal window and write in:
git clone https://github.com/gempesaw/Selenium-Remote-Driver --branch
build/master --single-branch --depth 1
11. cd Selenium-Remote-Driver
12. perl Makefile.PL
13. make
14. make test
15. sudo make install
16. Now everything is installed and you can et up for running the selenium tests
17. Create a superlibrarian user with the username koha and password
koha
18. If your usual port configuration for the intranet and OPAC is 8081
and 8080 respectively then set the staffClientBaseURL and OPACBaseURL
system preferences to localhost:8080 and localhost:80 respectively
19. sudo koha-shell <instancename>
20. perl t/db_dependent/selenium/authenticate.t
21. The test should pass.
Note: The time_diff comments in the test output showing what the test is
doing
Note: If you have issues with installing Selenium and
Selenium::Remote::Driver please write a comment on the bug report and I
will be more than happy to create a screencapture video showing all the
steps
Sponsored-By: Catalyst IT
https://bugs.koha-community.org/show_bug.cgi?id=19181
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
Run t/db_dependent/Virtualshelves.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
While we get packaging sorted, Net::OAuth2::AuthorizationServer is not a
hard dependency for Koha and the feature requiring it is disabled by
default.
This patch:
- Makes the dependency optional
- Makes the unit tests for the OAuth2 client credentials flow skip if
the dependency is not met.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch tests the situation in which Net::OAuth2::AuthorizationServer
is missing. It mocks Module::Load::Conditional::can_load and expects the
/token endpoint answers 'Unimplemented grant type' to all requests, and
the 'authenticate_api_request' in 'under' exit with unauthorized (403)
to requests in which the Authorization header is passed containing a
Bearer token, but OAuth2 is not really available.
To test:
- Apply this patch
- Run:
$ kshell
k$ prove t/db_dependent/api/v1/oauth.t
=> FAIL: Tests fail because our REST endpoints don't support this
behaviour.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds tests to verify that disabling the RESTOAuth2ClientCredentials syspref
makes any request on the /api/v1/oauth/token using the
'client_credentials' grant fail with 'grant not implemented'.
To test:
- Apply this patch
- Run:
$ kshell
k$ prove t/db_dependent/api/v1/oauth.t
=> FAIL: Tests fail because the change is not implemented!
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes the oauth.t tests leverage on the new Koha::ApiKey(s)
classes. It adds tests for expired tokens too.
To test:
- Apply this patch
- Run:
$ kshell
k$ prove t/db_dependent/api/v1/oauth.t
=> FAIL: Tests should fail without the rest of the patches.
Sponsored-by: ByWater Solutions
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@deichman.no>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds unit tests for the introduced classes: Koha::ApiKey(s).
To test:
- Apply this patch
- Run
$ kshell
k$ prove t/db_dependent/Koha/ApiKeys.t
=> FAIL: Tests fail because the feature is not implemented.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
GET /patrons now requires { "borrowers": 1 } instead of
{ "borrowers": "edit_borrowers" }
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It implements only the "client credentials" flow with no scopes
support. API clients are tied to an existing patron and have the same
permissions as the patron they are tied to.
API Clients are defined in $KOHA_CONF.
Test plan:
0. Install Net::OAuth2::AuthorizationServer 0.16
1. In $KOHA_CONF, add an <api_client> element under <config>:
<api_client>
<client_id>$CLIENT_ID</client_id>
<client_secret>$CLIENT_SECRET</client_secret>
<patron_id>X</patron_id> <!-- X is an existing borrowernumber -->
</api_client>
2. Apply patch, run updatedatabase.pl and reload starman
3. Install Firefox extension RESTer [1]
4. In RESTer, go to "Authorization" tab and create a new OAuth2
configuration:
- OAuth flow: Client credentials
- Access Token Request Method: POST
- Access Token Request Endpoint: http://$KOHA_URL/api/v1/oauth/token
- Access Token Request Client Authentication: Credentials in request
body
- Client ID: $CLIENT_ID
- Client Secret: $CLIENT_SECRET
5. Click on the newly created configuration to generate a new token
(which will be valid only for an hour)
6. In RESTer, set HTTP method to GET and url to
http://$KOHA_URL/api/v1/patrons then click on SEND
If patron X has permission 'borrowers', it should return 200 OK
with the list of patrons
Otherwise it should return 403 with the list of required permissions
(Please test both cases)
7. Wait an hour (or run the following SQL query:
UPDATE oauth_access_tokens SET expires = 0) and repeat step 6.
You should have a 403 Forbidden status, and the token must have been
removed from the database.
8. Create a bunch of tokens using RESTer, make some of them expires
using the previous SQL query, and run the following command:
misc/cronjobs/cleanup_database.pl --oauth-tokens
Verify that expired tokens were removed, and that the others are
still there
9. prove t/db_dependent/api/v1/oauth.t
[1] https://addons.mozilla.org/en-US/firefox/addon/rester/
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If items.restricted == 1, CanBookBeIssued will not returned what we are
testing.
The easiest and global fix is to define a default value at TestBuilder
package level
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
0) Apply this patch
1) prove t/db_dependent/Members/Attributes.t
should return green
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
TEST PLAN
---------
apply this test patch
prove t/db_dependent/OAI/Server.t
-- should fail
apply the other patch
prove t/db_dependent/OAI/Server.t
-- should pass
run koha qa test tools
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Sponsored-by: Goethe-Institut
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Sponsored-by: Goethe-Institut
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The same pattern is used several times in test:
checkout, checkin, get the debarment, compare the dates and remove the
debarment.
Let's move that to a separate subroutine
Sponsored-by: Goethe-Institut
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patchs adds the ability to calculate the end of the suspension date
(debarment date) using the finesCalendar syspref.
Prior to this patch it was never calculating without taking into account
the calendar.
calculated without taking holidays into account.
This was a problem because the restriction could end in the middle of a
period the library is closed.
Test plan:
- Set finescalendar to 'not including days the library is closed'
- Set a circulation condition with no fine/maxfine, but fine days and
max fine days instead
- Check out an item with a due date in the past
- Check the item in and verify the restriction date
- Clean the restriction
- Add holidays to your calendar on the calculated restriction date
- Check the item out again with the same due date in the past
- Check in the item again
- Verify the calculated restriction end date has changed, it's set to the day
after the holiday.
Fines in days restriction calculation is correctly taking calendar
into account.
Sponsored-by: Goethe-Institut
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test Plan:
1) Apply this patch and its' dependencies
2) Create and pay some various fees and fines
3) View the payments for fees, and fees paid by payments by
using the new 'Details' button available on boraccount.pl
Signed-off-by: Lee Jamison <ldjamison@marywood.edu>
Running updatedatabase.pl after patch application makes dependencies
happy. Passes QA Tools and works as intended.
Rebased (2017-12-21): Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Bug 2696: (QA follow-up) - Remove use of GetMember
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Improvements:
1) Index settings moved from code to etc/searchengine/elasticsearch/index_config.yaml. An alternative can be specified in koha-conf.xml.
2) Field settings moved from code to etc/searchengine/elasticsearch/field_config.yaml. An alternative can be specified in koha-conf.xml.
3) mappings.yaml has been moved from admin/searchengine/elasticsearch to etc/searchengine/elasticsearch. An alternative can be specified in koha-conf.xml.
4) Default settings have been improved to remove punctuation from phrases used for sorting etc.
5) State variables are used for storing configuration to avoid parsing it multiple times.
6) A possibility to reset the fields too has been added to the reset operation of mappings administration.
7) mappings.yaml has been moved from admin/searchengine/elasticsearch to etc/searchengine/elasticsearch.
8) An stdno field type has been added for standard identifiers.
To test:
1) Run tests in t/Koha/SearchEngine/Elasticsearch.t
2) Clear tables search_fields and search_marc_map
3) Go to admin/searchengine/elasticsearch/mappings.pl?op=reset&i_know_what_i_am_doing=1
4) Verify that admin/searchengine/elasticsearch/mappings.pl displays the mappings properly, including ISBN and other standard number fields.
5) Index some records using the -d parameter with misc/search_tools/rebuild_elastic_search.pl to recreate the index
6) Verify that you can find the records
7) Put <elasticsearch_index_mappings>non_existent</elasticsearch_index_mappings> to koha-conf.xml
8) Verify that admin/searchengine/elasticsearch/mappings.pl?op=reset&i_know_what_i_am_doing=1 fails because it can't find non_existent.
9) Copy etc/searchengine/elasticsearch/mappings.yaml to a new location and make elasticsearch_index_mappings setting in koha-conf.xml point to it.
10) Make a change in the new mappings.yaml.
11) Clear table search_fields (mappings reset doesn't do it yet, see bug 20248)
12) Go to admin/searchengine/elasticsearch/mappings.pl?op=reset&i_know_what_i_am_doing=1
13) Verify that the changes you made are now visible in the mappings UI
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch removes 3 subroutines from C4::Letters:
- getalert
- addalert
- delalert
And add 3 methods to Koha::Subscription:
- subscribers
- add_subscriber
- remove_subscriber
It makes the code cleaner for future cleanup.
TODO - we should remove alert.alertid and alert.type, and rename
alert.externalid with alert.subscriptionid
That way alert will be renamed borrowers_subscriptions (or similar) and
will become a simple join table between borrowers and subscriptions.
We will need to deal with FK that could not be satisfied.
Let's do that after this patch is pushed.
Test plan:
Subscribe and unsubscribe to email notifications sent when a new issues
is available.
Make sure everything works as before and you receive the emails.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It looks like this feature has never been finished. It has been
developed with more flexibility in mind, but only 'issue' is used for
this parameter. Apparently it could have been 'virtual', for virtual shelves.
Let remove this parameter and clean the code a bit.
TODO: Remove the DB column
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
- "your routing lists" tab is now highlighted when active
- get_routinglists was renamed to get_routing_lists
- Koha::Patron->get_routing_lists returns the ->search result
directly
- Koha::Subscription::RoutingList->subscription uses DBIC
relationship
- Undo changes to C4/Auth.pm
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the base for the new feature:
Show a list of the serial titles a patron is on routing
lists for in the OPAC.
Test plan applies to the complete patch set:
To test:
- Apply all patches
- Make sure RoutingSerials is not activated
- Check patron account in OPAC - no tab should appear
- Activate RoutingSerials
- Create subscriptions and different routing lists, test with:
- Patron with no routing list entries = no tab
- Patron with one or more routing list entries = tab appears
Signed-off-by: Dilan Johnpullé <dilan@calyx.net.au>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 20400: Rewrite using Koha::Objects
Adds
- Koha::Subscription::Routinglist
- Koha::Subscription::Routinglists
Adds 2 methods
- Koha::Patron::get_routinglists
- Koha::Routinglist::subscription
Signed-off-by: Dilan Johnpullé <dilan@calyx.net.au>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 20400: Add unit tests
prove t/db_dependent/Koha/Subscription/Routinglists.t
prove t/db_dependent/Koha/Patrons.t
Signed-off-by: Dilan Johnpullé <dilan@calyx.net.au>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 20400: Display new tab in OPAC only for patrons with routing lists
The visibility of the routing list tab in the OPAC depends
on the system preference RoutingSerials and the existence
of routing list entries for the patron.
Some libraries only offer routing lists to certain user groups and
would not want it generally visible. As there are currently no
actions you can perform from the list, this appears to be a
reasonable behaviour.
See test plan in first patch.
Signed-off-by: Dilan Johnpullé <dilan@calyx.net.au>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 20400: (follow-up) Use Asset TT plugin on opac-routing-lists.tt
Patch applies and functions as described.
Signed-off-by: Dilan Johnpullé <dilan@calyx.net.au>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 20400: (QA follow-up) Redirect to 404 if routing is disabled
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch moves the Koha::Patrons->merge method into
Koha::Patron->merge_with in the line of the discussed implementation for
bug 15336. I agree with that implementation so I provide this follow-up.
Tests are adjusted, the controller script is adapted too. The behaviour
remains.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It would be great if there were a merge patrons feature. If you
accidentally end up with one patron with two cards it would be nice to
merge their records together so that you don't lose their history or
holds or anything.
This patch adds a basic patron merge feature. It attempts to relink all
patron related tables from the patron(s) to be merged. It does not
attempt to relink librarian account related tables at this time. This
feature does not attempt to automatically resolve issues such as
duplicate holds. Such a feature could build upon this one though.
Test Plan:
1) Apply this patch
2) Find two or more patrons
3) Perform a patron search that will bring them up on the same page of
results, or add them all to a list of patrons.
4) Use the 'merge' button to begin the merging process
5) Choose a patron to keep
6) Verify the deleted patrons data ( checkouts, holds, etc )
are now linked to the kept patron
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Ed Veal <eveal@mckinneytexas.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1 - prove t/db_dependent/Koha/Z3950Servers.t
2 - Load cataloging and authority home pages
3 - Verify you can add form z395 on each page
4 - Delete all z3950 servers
5 - Viery option to add from Z3950 is removed on both pages
Signed-off-by: Jesse Maseto <jesse@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
0) Do not apply the patch
1) Run these 3 commands
git grep ModNote
git grep getcredits
git grep getrefunds
all should return occurances only in C4/Accounts.pm - the sub definition
and in t/db_dependent/Accounts.t
2) Apply the patch
3) Run commands from 1) again, now there should be no occurence
4) prove t/db_dependent/Accounts.t
should return green
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Given the confusion regarding this behaviour it sounds better to make it
configurable.
This pref will take 4 different values, 1 per place an item can be
marked as lost.
Test plan:
Mark items as lost and confirm the item is returned or not, depending on
the value of the system preference.
- from the longoverdue cronjob (--mark-returned takes precedence if set)
- from the batch item modification tool
- when cataloguing an item
- from the items tab of the catalog module
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We've had the ability to 'reverse' a payment for a long time, but it
would be much better if we had a true void payment function that
replaces the paid amounts into the fee so that it appears as if the
payment was never made.
Test Plan:
1) Apply this patch and dependent patches
2) Run updatedatabase.pl
3) Create some fines
4) Pay those fines
5) Use the new 'void' button to void the payments
6) Note the fines were restored to their pre-payment amounts
Signed-off-by: Koha-us conference <koha-us@koha-us.net>
Signed-off-by: BWS Sandboxes <ByWaterSandboxes@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Some libraries would like to be able to specify more specific payment types such as cash, check, credit card, or even canned food ( for food drives ). This feature will allow a library to specify payment types as authorised values of the type PAYMENT_TYPE.
Test Plan:
1) Apply patches
2) Update database
3) Add authorised value PAYMENT_TYPE with values 'Cash', 'Check', 'Credit card'
4) Go to the fines section of a patron who has several fines
5) Tab 'Fines'
6) Click on 'Pay' for an individual fine
7) Verify that in the form a 'Pay an individual fine' dropdown appears with payment types
8) Select a payment type, confirm payment
9) Verify that payment type appears in "Description of charges" in tab 'Account'
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Bug 18786: Remove use of Koha::Patron::Images
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Bug 18786: Remove duplicate block with bad IF
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
prove t/db_dependent/Koha/Subscription.t
must return green
NOTE: My preference is for $subscription to be object,
and perhaps something like $built_subscription to
be from the builder. Because, $object is a poor
variable name.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We do not need to pass all those parameters, just the checkout object is
enough.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test Plan:
1) Apply this patch
2) Assign a charge to an item type
3) Checkout an item of that type to a patron
4) View the accountlines table for that patron
SELECT * FROM accountlines WHERE accounttype='Rent' and borrowernumber=##;
5) Note there is an issue_id
Or
1) Apply this patch
2) prove t/db_dependent/Circulation/issue.t
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Moving the status to the invalid 'processing' might well have unwanted
side-effects. (The status column will be set to empty string and we have
a problem if it is not processed.)
This patch allows pass-through of DBIX's make_column_dirty in
Koha::Object (simple tests included) and uses it to force an update.
If the update does not return true, it still exits.
Test plan:
[1] Read the changes.
[2] Run t/db_dependent/Koha/Object.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Having to write [% KOHA_VERSION %] for each url is bad because:
- It's easily forgettable when adding new <script> or <link>
- It prevents grep'ing for the full filename
- It violates the DRY principle
- If at some point we want to change the "force js and css reload"
mechanism, it will be tedious
This patch:
- adds a Template::Toolkit plugin that generates <script> and
<link> tags for JS and CSS files, and inserts automatically the Koha
version in the filename
- use the new plugin to remove all occurences of [% KOHA_VERSION %]
- remove the code that was adding KOHA_VERSION as a template variable
Test plan:
1. Apply patch
2. Go to several different pages in Koha (opac and intranet) while
checking your browser's dev tools (there should be no 404 for JS and
CSS files, and the Koha version should appear in filenames) and the
server logs (there should be no "File not found")
3. `git grep KOHA_VERSION` should return nothing
4. prove t/db_dependent/Koha/Template/Plugin/Asset.t
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
TEST PLAN
---------
1) apply this patch
2) prove t/db_dependent/Circulation.t
-- horrible death.
3) apply next path
4) prove t/db_dependent/Circulation.t
-- passes.
5) run koha qa test tools
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
As requested by RM, this patch replaces using the global $cached_indicators
by saving state temporarily during the (limited) lifetime of the object.
Essentially this affects two places in code:
[1] blinddetail-biblio-search.pl (loading auth record in editor)
[2] AuthoritiesMarc::merge (merging authority into biblios)
Concurrent runs of [1] and/or [2] together with a simultaneous pref change
just in between could cause slight (hypothetical) side-effects.
The current approach of keeping state in the object makes that a series of
controlled_indicators calls during an immediate merge of one specific
authority is not affected by a simultaneous pref change. So the same rules
are applied to the set of attached biblio record for that authority.
Note also that the cron job ignores a simultaneous pref change, since
it reads from the unchanged L1 cache (yes, also hypothetical).
Test plan:
[1] Run t/Koha/Authority/ControlledIndicators.t
[2] Run t/db_dependent/Authority/Merge.t
[3] Run t/db_dependent/Koha/Authorities.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch does:
[1] Adds Koha::Authority->controlled_indicators (with a test).
[2] Adds a call to controlled_indicators in AuthoritiesMarc::merge.
Unit test Merge.t is extended too.
[3] Simplifies the code in authorities/blinddetail-biblio-search.pl by
calling controlled_indicators.
Test plan:
[1] Run t/db_dependent/Koha/Authorities.t
[2] Run t/db_dependent/Authority/Merge.t
[3] Steps 3 to 7 for MARC21:
Create a PERSO_NAME authority with 008/11=r and ind1=3
[4] Edit a biblio and add a 600 linked to the new authority.
[5] Verify that the biblio has ind1==3 and ind2==7 and $2==aat.
(If $2 is not visible, check the metadata in biblio_metadata.)
[6] Edit the PERSO_NAME authority and change 008/11 to '|' (bar).
[7] Verify that merge updated your biblio record: $ind2==4 and $2 gone.
[8] UNIMARC: Follow the pattern from steps 3 to 7.
Create authority, link it in a biblio, check indicators (they should
be copied both). Edit authority, change indicators and verify the
merge results in the biblio record.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested PERSO_NAME and UNIF_TITLE.
For UNIF_TITLE the second authority indicator is copied to ind1 or ind2,
depending on the biblio tag involved.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Apart from adding tests for this sub, we make the following change
too and support it with a test.
The fallback to $code in the construction
$thes_mapping{ $code } // $code // '4'
is removed by this patch. When $code is not in $thes_mapping, we cannot
assume that it is a valid code for a biblio indicator. In this case it is
more safe to mark it as 4 (Source not specified).
Test plan:
Run t/Koha/Authority/ControlledIndicators.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This module reads its settings from pref AuthorityControlledIndicators.
The get method allows you to retrieve indicator values for specific
biblio fields.
Test plan:
Run t/Koha/Authority/ControlledIndicators.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended: Added a test to show that "ind1:" returns empty string.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
prove t/db_dependent/Biblio.t
should be green
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Found this regression when working on other patches:
If you edit a patron and blank the userid field, it will be regenerated
with an incremented value (firstname.surname will be firstname.surname1)
This is because we use a non-existing patron and ->in_storage in
has_valid_userid is always false.
The trick here is to backup the value, generate the userid, then reset
userid to the previous value.
As the POD says, it will be fix later, when AddMember and ModMember will
be replaced with Koha::Patron->store
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
And prove that we are not cheating
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Reuse how C4::Members::Check_Userid works and adapt it to write
Koha::Patron->check_userid
Adapt the tests to use this new method.
The tests still pass, we can adapt the different callers
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch moves the tests related to Check_userid out of Members.t
The tests must pass with only this patch applied
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This bug has been found during testing bug 19289.
In some conditions C4::Biblio::TransformHtmlToXml will generate a malformed XML structure. The last </datafield> can be duplicated.
For instance, if a call like:
my $xml = TransformHtmlToXml( \@tags, \@subfields, \@field_values );
with the last value of @field_values is empty, it will return:
<?xml version="1.0" encoding="UTF-8"?>
<collection
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.loc.gov/MARC21/slimhttp://www.loc.gov/standards/marcxml/schema/MARC21slim.xsd"
xmlns="http://www.loc.gov/MARC21/slim">
<record>
<datafield2 tag="020" ind1=" " ind2=" ">
<subfield code="a">l</subfield>
</datafield>
<datafield1 tag="100" ind1=" " ind2=" ">
<subfield code="a">k</subfield>
</datafield>
<datafield1 tag="245" ind1=" " ind2=" ">
<subfield code="a">k</subfield>
</datafield>
<datafield1 tag="250" ind1=" " ind2=" ">
<subfield code="a">k</subfield>
</datafield>
<datafield1 tag="260" ind1=" " ind2=" ">
<subfield code="b">k</subfield>
<subfield code="c">k</subfield>
</datafield>
</datafield>
</record>
</collection>
Which will result later in the following error:
:23: parser error : Opening and ending tag mismatch: record line 6 and datafield
</datafield>
^
:24: parser error : Opening and ending tag mismatch: collection line 2 and record
</record>
^
:25: parser error : Extra content at the end of the document
</collection>
Test plan:
You can test it along with bug 19289 and confirm that it fixes the problem
raised on bug 19289 comment 30
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds C4::Context->timezone bad timezone handling.
The calculated 'effective' timezone is tested with the right tool and a
fallback to 'local' is added. A warning is printed in the logs.
A test for this is added to about.pl too, along with the right warning
messages in case of problems.
Tests are added for both invalid TZ and to make sure the warning is
raised.
To test:
- Apply the patch
- Run:
$ kshell
k$ prove t/timezones.t
=> SUCCESS: All tests pass
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Most of Koha depends on the local timezone of the server, except for Koha::Database which support an ENV override with the key TZ.
We should take this a step further. We should not only accept the TZ environment variable for all of Koha, we should really be able to set the timezone in the koha conf file as well so we don't have to pass that environment variable to things like cronjobs and one-off scripts.
Test Plan:
1) Apply this patch
2) Set a timzone in your koha_conf file, that is *not* your local time zone
Available timzones are listed here: https://en.wikipedia.org/wiki/List_of_tz_database_time_zones
3) Restart apache/plack
4) Perform some actions, check the timestamps in the database and in the
html output, note they are for the set timezone and not the local
timezone.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
https://jenkins.koha-community.org/job/Koha_Master_D8/427/consoleFull
t/db_dependent/Koha/Acquisition/Order.t .. 1/2 # No tests run!
# Failed test 'No tests run for subtest "entrydate"'
# at t/db_dependent/Koha/Acquisition/Order.t line 97.
# Looks like you failed 1 test of 1.
# Failed test 'store'
# at t/db_dependent/Koha/Acquisition/Order.t line 99.
Cannot insert order: Mandatory parameter quantity is missing at t/db_dependent/Koha/Acquisition/Order.t line 77.
# Looks like your test exited with 255 just after 2.
It happens when basket.is_standing is 0
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We already have a chargeperiod (Fine charging interval) value which is
taken into account for fine ($) for not for the suspension period.
This patch adds a new column suspension_chargeperiod (Fine day charging
interval) to add the same behaviour when a suspension is calculated.
Test plan:
Add overdue item and play with the circulation rules (and the calendar).
The suspension period must be correctly calculated.
Please provide the different tests you made.
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes a few changes to the tests to take into account the
change to indexing.
To test:
prove t/db_dependent/Koha_Elasticsearch_Indexer.t
Should return green
Signed-off-by: David Bourgault <david.bourgault@inlibro.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If EnablePlugins was 0, this test before this patch fails.
After this patch, it passes.
TEST PLAN
---------
1) Apply all but this patch
2) Run the following commands
kshell
prove t/Koha_Template_Plugin_KohaPlugins.t
-- two tests fail, if you have the conf or syspref set to 0.
3) Apply this patch
4) Repeat step 2.
-- all tests pass, including the positive and negative case checks.
5) run koha qa test tools
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Resolve:
ok 33 - Can renew, item is marked not for loan, hold does not block
Can't use string ("1") as a HASH ref while "strict refs" in use at /usr/share/koha/devclone/C4/Items.pm line 557.
Trivial fix. Remove fourth parameter.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The system preference CataloguingLog is not recommended for use in
production. This is do to the fact that every checkin and checkout
generates one or more log entires. This seems to be not only bad
behavior, but unnecessary and outside the needs of CataloguingLog as we
have CirculationLog.
Test Plan:
1) Log into staff client
2) Home -> Koha administration -> Global system preferences -> Logs
3) Set only CataloguingLog to 'Log', everything else to "Don't log"
4) Click 'Save all Logging preferences'
5) In MySQL, use your instance DB, and then type 'delete from action_logs;'
6) Have a person checkout and checkin anything.
7) In MySQL, 'select * from action_logs;'
-- there will be data. This is the floodiness that will be removed.
8) Apply this patch
9) Repeat steps 5-7
-- there should be no data.
10) Edit any biblio or item.
11) In MySQL, 'select * from action_logs;'
-- there should be data reflecting the changes made.
12) run koha qa test tools
NOTE: Improved clarity of test plan -- Mark Tompsett
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
0) Do not apply the patch
1) Run git grep TotalPaid and confirm it is only defined and then used once in a test
2) Apply the patch
3) git grep TotalPaid should return nothing
4) prove t/db_dependent/Stats.t should be green
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
purge_zero_balance_fees is used in cleanup_database.pl to determine which fees can be cleaned up.
It uses a simple SQL query to determine which rows in accountlines need to be removed:
463 my $sth = $dbh->prepare(
464 q{
465 DELETE FROM accountlines
466 WHERE date < date_sub(curdate(), INTERVAL ? DAY)
467 AND ( amountoutstanding = 0 or amountoutstanding IS NULL );
468 }
The function comes with the following warning:
451 B<Warning:> Because fines and payments are not linked in accountlines, it is
452 possible for a fine to be deleted without the accompanying payment,
453 or vise versa. This won't affect the account balance, but might be
454 confusing to staff.
This was a reasonable solution prior to the addition of account_offsets in 17.11. The problem now is that rows in accountlines which are linked as credits in accountlines will *always* have amountoutstanding marked as 0. These are linked to debits via account_offsets. purge_zero_balance_fees will delete credits and leave rows in account_offsets which link to deleted credits.
Sites using the --fees option cleanup_database.pl which upgrade to 17.11 may have all of their credits removed without warning.
Test Plan:
1) Apply this patch
2) prove t/db_dependent/Accounts.t
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The problem is the calls to HTTP::OAI::Header, etc.
may reference gmtime which is continually changing by
the second. By forcing time to lock for all the tests,
except the last one, we can be assured things should
not fail.
TEST PLAN
---------
install libtest-mocktime-perl
apply the patch
restart_all
in kshell, prove t/db_dependent/OAI/Server.t
run koha qa test tools
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Jenkins fails (run 287) on a test in t/db_dependent/Letters/TemplateToolkit.t:
With the historical syntax:
# Your request for an article from tQYRS (c3Av58O0P5xkkIGu) has been canceled for the following reason:
With the TT syntax:
# Your request for an article from tQYRS_ (c3Av58O0P5xkkIGu) has been canceled for the following reason:
The last character of the biblio's title has been removed because it's a punctuation character.
It comes from: C4::Letters::_parseletter
893 $val =~ s/\p{P}$// if $val && $table=~/biblio/;
The same replacement is done for patron's attributes too.
Test plan:
- Confirm that the new tests pass. That should be enough to confirm this change make sense.
Test plan (manual):
- Create a biblio with a title ending with a punctuation (like "with_punctuation_"), or any other fields of biblio/biblioitem
- Generate a notice which will display this field (CHECKIN for instance)
Use the historical syntax and the TT syntax, both should display the title without the punctuation character at the end
CHECKIN historical:
The following items have been checked in:
----
<<biblio.title>>
----
CHECKIN TT syntax:
The following items have been checked in:
----
[% biblio.title %]
----
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Here we are, no more occurrences of GetPendingIssues, we can remove the
tests and subroutine \o/
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@deichman.no>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To move this subroutine out of the C4 namespace we face the same
problematic as bug 17553 (with GetOverduesForPatron).
We need to provide an equivalent method and so return all the related
value for a given checkout.
We can acchieve the easily using Koha::Object->unblessed_all_relateds,
but we need to keep in mind that it is a temporary move.
Indeed we will want to use our API to only access/retrive values we really need.
The whole trick could be removed when the current syntax for notices
will be deprecated and removed.
Note: this method returns the same number of elements than ->checkouts
They indeed returns the same things, but it sounds better to me to have a
different method to highlight (from the callers) where does it come
from (C4::Members::GetPendingIssues).
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@deichman.no>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@deichman.no>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@deichman.no>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
prove -v t/db_dependent/Koha/Reports.t
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Maksim Sen <maksim.sen@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
NOTE: Confirmed that the typo of 17641 was part of bug 17941.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adapts the existing endpoint's tests so they expect:
- 'patron_id' for 'borrowernumber'
- 'library_id' for 'branchcode'
- 'category_id' for 'categorycode'
In the process, I tried to make the tests more robust, by creating random
data that gets deleted to make sure our tests cases can't have false
positives.
Independent subtests are wrapped inside transactions to avoid
eventual interference.
To test:
- Apply the patch
- Run:
$ kshell
k$ prove t/db_dependent/api/v1/patrons.t
=> FAIL: The api doesn't implement the expected behaviour and attributes
for endpoint responses
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch removes previously added validation code from Koha::Patron
as we will rely on the DB structure and relationships to catch the same
problems. This is implemented on bug 19828.
This patch also adapts the API controller class to expect this behaviour
change from Koha::Patron. The expected exceptions are adjusted, and some
minor changes take place. The API tests are adjusted as well.
To test:
- Run:
$ kshell
k$ prove t/db_dependent/Koha/Patrons.t
k$ prove t/db_dependent/api/v1/patrons.t
=> SUCCESS: Tests should still pass
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Works perfectly. Well done everyone!
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Dilan Johnpullé <dilan@calyx.net.au>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch refactors the original work so it implements the controllers
and the spec using Mojolicious::Plugin::OpenAPI, and OpenAPI for the specification.
It removes the ability for patrons without permissions to edit their own data or their
guarantee's. This will be moved to a patron modification requests endpoint for simplicity.
It makes use of bugs 19410 and 19686 and their dependencies to deal with parameters handling,
query building and pagination.
Tests are adapted.
To test:
- Apply this patches and the dependencies
- Run:
$ kshell
k$ prove t/db_dependent/api/v1/patrons.t
=> SUCCESS: Tests pass!
- Sign off :-D
Sponsored-by: ByWater Solutions
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds support for add, edit and delete patrons via REST API.
GET /api/v1/patrons Get patron list from params
GET /api/v1/patrons/<borrowernumber> Get single patron
POST /api/v1/patrons Create a new patron
PUT /api/v1/patrons/<borrowernumber> Update data about patron
DEL /api/v1/patrons/<borrowernumber> Delete a patron
Revised Test plan:
1) Apply this patch
2) Run tests perl t/db_dependent/api/v1/patrons.t
3) Add a user with proper rights to use the REST API
4) play with your favourite REST client (curl/httpie, etc.):
Authenticate with the user created above and get a CGISESSION id.
Use the CGISESSION to add, edit and delete patrons via the API.
5) Use PUT /patrons/<borrowernumber> for a patron without borrowers
flag. This should go into pending patron modification status and
needs to be accepted by a librarian.
Please note there is no validation of body input in PUT/POST other
than branchcode,category,userid,cardnumber.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We likely shoudln't pass through an uncoverted sort order for now, but
it does allow us to look ahead to implementing the orders directly so
seems a good option to have.
Either this patch should be used, or the commented out tests should be
removed
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
add KOHA_PROVE_CPUS envar to manually set number of cpus
to test..
1/ set number of cpus to 1
$ export KOHA_PROVE_CPUS=1
2/ observe 1 cpus are used
$ time prove -v t/db_dependent/00-strict.t
t/db_dependent/00-strict.t ..
Using 1 CPUs...
3/ unset number of cpus
$ export KOHA_PROVE_CPUS=
4/ observe all available cpus are used
$ time prove -v t/db_dependent/00-strict.t
t/db_dependent/00-strict.t ..
Using 32 CPUs...
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: David Bourgault <david.bourgault@inlibro.com>
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Please improve if needed the 2 occurrences on a separate bug reports.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Copy mocking sendmail code from t/db_dependent/Letters.t
into the Passwordrecovery.t test file.
prove t/db_dependent/Passwordrecovery.t
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Element id=doc does not longer exist on the admin home page
The "main block" need to be localized using the new class 'main
container-fluid'
We will certainly need to improve this later.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1 - Edit a framework and add the 'upload/pl' plugin to the 856 field
2 - Attach a pdf to one record
3 - Attach a different type of file to another
(To attach, edit a record in the framework edited above and find the
helper by the 856 field)
4 - Click the links on the record
5 - Verify the pdf opens inline
6 - Verify the other file does not
7 - prove t/db_dependent/Upload.t
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
TEST PLAN
---------
1) Run the following commands on a kohadevbox:
kshell
prove -v t/db_dependent/rollingloans.t
exit
-- all the tests were skipped, not useful!
2) Apply this patch
3) Redo step 1
-- all the tests run
4) Run qa test tools
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It would be nice to allow emails to be sent overnight, but limit the sending of SMS messages to hours when people are awake. Adding a type limit to process_message_queue.pl would allow this to be accomplished easily.
Signed-off-by: Charles Farmer <charles.farmer@inLibro.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This test will reveal that we need to resolve a warning too.
Test plan:
[1] Run t/Output.t without the second patch.
[2] The test will fail on the warning raised by an undefined value.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This sets a valid email and changes the tests
to expect it was sent.
prove t/db_dependent/Passwordrecovery.t
-- noise before patch
-- no noise after patch
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The biblioitem's info can be retrieved with Koha::Biblio->biblioitem
Test plan:
1. Use the age restriction to restrict checkouts for a given patron
2. Check some items of a biblio out, go to "Items" tab, then "View
item's checkout history" link. Compare views with and without patches
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Some libraries need to be able to send additional patron data from the
extended patron attributes in made up SIP2 fields for the patron
information and patron status responses.
Test Plan:
1) Apply this patch
2) Create 3 new patron attributes with the codes CODE1, CODE2, CODE3.
Make a least one repeatable.
3) Create a patron, add those attibutes for the patron, make sure there
are at least two instances of the repeatable code
4) Edit your SIP2 config file, add the following within the login stanza:
<patron_attribute field="XX" code="CODE1" />
<patron_attribute field="XY" code="CODE2" />
<patron_attribute field="XZ" code="CODE3" />
5) Using the sip cli emulator, run patron_information and
patron_status_request messages for the patron
6) Note the values you set for the patron attributes are sent in the
corrosponding fields!
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Daniel Mauchley <dmauchley@duchesne.utah.gov>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended: added parentheses on line 488 when assigning hashref to array.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The symbol of currencies are not displayed (or not correctly) so far.
This patch set adds the ability to configure the display of the symbol
(with or without a whitespace between the symbol and the price).
Test plan:
1. Execute the update DB entry, go to the currency admin page and tick the
new "Space separation between symbol and value" checkbox
2. Add a fine to a patron and use their credentials to login at the OPAC
3. You should see the "$ 42 due fines and charges" info in the
dashboard
4. Untick the new checkbox to remove the space and reload the OPAC main
page.
=> The space should not be longer displayed ($42)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
+ Added a `run_flavoured_tests` sub that runs for each MARC flavour
* Moved SearchWithISBNVariation tests to the new sub
I copied a lot of the necessary utility functions over Biblio.t (as of Jonathan's suggestion). I also tried to name and organize the code in such a way that it can be reused if anyone else needs to run "flavoured" tests in the future.
prove t/db_dependant/Acquisition.t OK
QA tool green
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Advanced acquisition search will now follow the "SearchWithISBNVariations" system preference.
Test plan :
0) Make sure you have orders pending or completed
1) Enable SearchWithISBNVariations if it is not enabled
2) Search for one of your orders by its ISBN, it should appear
3) Search for the same order by a variation of its ISBN, I used this website to find it : http://www.hahnlibrary.net/libraries/isbncalc.html
You should not get a result.
4) Apply patch
5) Repeat step 2-3. You should get a hit both times.
6) prove t/db_dependent/Acquisition.t
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1 - grep get_biblionumber_from_isbn
2 - verify all occurences are not actual calls (except for test)
3 - Apply patch
4 - grep get_biblionumber_from_isbn
5 - Verify it is removed
Signed-off-by: Roch D'Amour <roch.damour@inlibro.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The file is no longer used (is it?) and the project looks dead. Let
remove that file.
Signed-off-by: Roch D'Amour <roch.damour@inlibro.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Run the following commands:
kshell
prove -v t/db_dependent/Letters.t
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Today Feb 28th 2018:
If we subtract 18y to this DateTime object 29/02/2000 and so the patron is not major yet
use Koha::DateUtils qw( dt_from_string );
say dt_from_string('28/02/2018')->add(years => -18);
say dt_from_string('28/02/2018')->add(years => -18, end_of_month => 'limit');
will display:
2000-02-29T00:00:00
2000-02-28T00:00:00
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The test should remove the holdingbranch key in the expected results when
there is only one branch.
See the logic in C4::Koha.
Test plan:
[1] Run Search.t on a database with multiple branches.
[2] Run Search.t on a database with one branch. Without this patch the test
would fail: Failed test '_get_facets_info returns the correct data'.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Adding a days>0 test in the sub with a POD line.
Specific subtest for this sub added in Suggestions.t.
Test plan:
Run t/db_dependent/Suggestions.t again.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Just rearranging some modules here.
Adding Koha::Database and schema calls.
Test plan:
Run t/db_dependent/Suggestions.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan
prove t/db_dependent/Koha/Account/Lines.t
--> should be green
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
As said previously, GetMemberAccountBalance returns ( the balance, the
non issues charges, the other charges)
The other charges are the balance - the non issues charges.
In this patch we remove the subroutine from C4::Members and use the
new Koha::Account->non_issues_charges subroutine instead
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Yes, we need tests to make sure we understand what is going on in this
subroutine.
The different combination of HoldsInNoissuesCharge,
RentalsInNoissuesCharge and ManInvInNoissuesCharge are tested here with
the subroutine we are going to remove (GetMemberAccountBalance).
In one of the next patches the new methods will be used to make sure we
are not modifying the calculated values (except the formatting).
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The GetMemberAccountRecords may be a perf killer, it retrieves all the
account lines of a patron and then the related item and biblio
information.
Most of the time we only want to know how much the patron owns to the
library (sum of amountoutstanding). We already have this information in
Koha::Patron->account->balance.
This patch replaces the occurrences of this subroutine by fetching only
the information we need, either the balance, the detail, or both.
It removes the formatting done in the module, to use the TT plugin
'Price' instead.
There is a very weird and error-prone behavior/feature in
GetMemberAccountBalance (FIXME): as the accountlines.accounttype is a
varchar(5), the value of the authorised value used for the
ManInvInNoissuesCharge pref (category MANUAL_INV) is truncated to the 5
first characters. That could lead to unexpected behaviors.
On the way, this patchset also replace the GetMemberAccountBalance
subroutine, which returns the balance, the non issues charges and the
other charges. We only need to have the balance and the non issues
charges to calcul the third one.
Test plan:
Add several fees for a patron and play with HoldsInNoissuesCharge,
RentalsInNoissuesCharge and ManInvInNoissuesCharge.
The information (biblio and item info, as well as the account line) must
be correctly displayed on the different screens: 'Fines' module, fine
slips, circulation module
Note that this patchset could introduce regression on price formatting,
but will be easy to fix using the TT plugin.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patchset adds a 'damaged_on' column to store the date an item is
marked damaged, analogous to withdrawn_on and itemlost_on
To test:
1 - Apply patch
2 - Mark an item damaged via moredetail.pl (Items tab on left in
details)
3 - Note the damaged on date apears below
4 - Unmark the item, the date is removed
5 - Go to the edit items screen (from top bar 'Edit->edit items')
6 - Mark item damaged - check db or moredetails.pl to see damaged_on
date
7 - Unmark item damaged - confirm date is removed
8 - prove t/db_dependent/Items.t
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Charles Farmer <charles.farmer@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We should call Koha::Patron->is_expired in CanBookBeIssued instead of
doing the same calculation.
Tests have been adapted to pass with new SQL modes.
We should not need to update the values in DB, we already have
Bug 14717: Prevent 0000-00-00 dates in patron data (3.21.00.023)
Test plan:
prove t/db_dependent/Circulation/dateexpiry.t
prove t/db_dependent/Koha/Patrons.t
must return green
Signed-off-by: Roch D'Amour <roch.damour@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch introduces tests for Koha's support for 4-byte supplemental
UTF-8 chars. encoding/decoding tools handle this gracefuly. The missing
piece is the MySQL DB backend.
The tests in this patch:
- Adds a couple records for each flavour (MARC21 and UNIMARC) so
search_utf8.t tests 4-byte chars are handled correctly
- Adds emoji testing in auth_values_input_www.t
To test:
- Apply this patch
- Run:
$ kshell
k$ prove t/db_dependent/www/search_utf8.t \
t/db_dependent/www/auth_values_input_www.t
=> FAIL: It should fail if the DB hasn't been migrated into using
utf8mb4
Sponsored-by: Hotchkiss School
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adapts the unit tests for the cities endpoint to the
requirements from the RFC. This tests are expected to just fail
without the needed followup.
To test:
- Run:
$ kshell
k$ prove t/db_dependent/api/v1/cities.t
=> FAIL: Tests obviously don't pass without the followup patch.
Signed-off-by: Claire Gravely <claire.gravely@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds (yet) another param to objects.search: a reference
to a to_api function to be applied when processing the search results
for output.
To test:
- Apply this patch
- Run:
$ kshell
k$ prove t/db_dependent/Koha/REST/Plugin/Objects.t
=> SUCCESS: Test count raised, and tests pass!
- Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Bourgault <david.bourgault@inlibro.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test Plan:
1) Apply this patch
2) Test importing patrons from command line,
options are availble with --help.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested with minimal csv
(cardnumber,surname,firstname,categorycode,branchcode,password,userid)
Overwrite does not change category or branch.
Patrons are loaded, userid & password works
Updated license to GPLv3
No other koha-qa errors.
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 12598 - Tidy import_borrowers.pl
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 12598 - Move importing code to a subroutine
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 12598 - Update command line script to use patron import subroutine
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 12598 [QA Followup]
* Fix copyright on import_borrowers.pl
* Changes -c --csv to -f --file
* Adds -c --confirm option
* Renames misc/import_borrowers.pl to misc/import_patrons.pl
* Restore userid matchpoint option
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 12598 - Fix merge to master. Backport 3 updates from latest import_borrowers.pl
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 12598 - Started regression tests. Fix missing C4::Members::Attributes package
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 12598 - More refactoring and regression tests in Koha::Patrons::Import
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 12598 - Creating objects in misc/import_patrons.pl and tools/import_borrowers.pl
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 12598 - Refactoring Koha::Patrons::Import includes bug fixed for critical date types and header column parsing
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 12598 - Rebase + backport of 16426 plus fixing 16426
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 12598: catch warnings raised by import_patrons in tests
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch add 2 methods to the Koha::Patron module: is_adult and
is_child.
That way the business logic is at only one place and covered by tests.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Fix at ->store level, this issue appears in lot of places.
Fix for:
Field 'datecreated' doesn't have a default value
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
# Failed test 'pending_count() correctly returns 2 if filtered by library'
# at t/db_dependent/Koha/Patron/Modifications.t line 355.
# got: '0'
# expected: '2'
# Failed test 'pending_count() correctly returns 2'
# at t/db_dependent/Koha/Patron/Modifications.t line 360.
# got: '0'
# expected: '2'
# Failed test 'pending_count() correctly returns 1'
# at t/db_dependent/Koha/Patron/Modifications.t line 365.
# got: '0'
# expected: '1'
# Looks like you failed 3 tests of 16.
# Failed test 'pending_count() and pending() tests'
# at t/db_dependent/Koha/Patron/Modifications.t line 374.
# Looks like you failed 1 test of 6.
[19:45:28] t/db_dependent/Koha/Patron/Modifications.t
The logged in patron did not have permissions to view patron's info from other branches.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Remove CPL; without this branch, the test crashes.
Rearrange modules at the start.
Add Koha::Database calls.
Move a few global my vars to our level.
Remove intermediate rollbacks.
Test plan:
[1] Run prove t/db_dependent/FrameworkPlugin.t
Ignore noise from unimarc plugins :)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
