Test plan:
Without this patch, add email address in that pref.
Run Letters.t. It fails.
Now apply patch and run test again. Should pass.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 5c71283c89)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 9a4e3bd49f)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Koha::Object depends on Koha::DateUtils, which depends on C4::Context,
which depends on Koha::Config::SysPref, which depends on... Koha::Object
Apart from the circular dependency, the dependency on C4::Context alone
is problematic as it loads a bunch of modules that are not needed at all
in Koha::Object (YAML::XS and ZOOM for instance).
As Koha::Object is used as a base for a lot of modules, we should take
care to only load the minimum required.
This patch moves some date parsing code to specific modules:
- Koha::DateTime::Format::RFC3339
- Koha::DateTime::Format::SQL
and it uses them in Koha::Object and Koha::DateUtils where it is
possible.
Test plan:
1. Do not apply the patch yet and run the following command:
`perl -cw Koha/Object.pm`
It should print several warnings about redefined subroutines, meaning
there is a circular dependency.
2. Apply the patch
3. Run `perl -cw Koha/Object.pm`. It should only say:
"Koha/Object.pm syntax OK"
4. Run the following command:
prove \
t/DateUtils.t \
t/Koha/DateTime/Format/RFC3339.t \
t/db_dependent/Koha/Object.t
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 8d5299639e)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Removing the manual transfer and rightaway doing the Reserve
transfer. One test description was misleading too.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 7f22156b8f)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
GetOtherReserves attempts to set the waiting/transit status for the next
hold on the list when applicable, but in practice it either leaves the
hold state unchanged, or sets the itemnumber without setting the found
status (erroneously converting bib-level holds to item-level holds).
The latter situation only occurs when the user has been prompted to
confirm, cancel, or revert the hold, and is able to ignore the prompt.
In those situations, the hold's state should not change.
GetOtherReserves does not need to change the hold state, and it does not
do so correctly. Besides that, it does not do much other than call
CheckReserves, and is only used in 3 places.
This patch removes GetOtherReserves, and refactors returns.pl and
C4::Reserves::ModReserveCancelAll to call CheckReserves directly instead.
To test:
1. Place 2 bib-level holds for 2 different patrons (Patron A and Patron
B) on the same record, both for pickup at the logged-in library
2. Check in an item from that record to fill Patron A's hold
3. Set the hold's expiration date to yesterday by accessing the database
in the command line:
- In a ktd shell prompt, open the db client with koha-mysql kohadev
- UPDATE reserves
SET expirationdate = DATE_SUB(CURDATE(), INTERVAL 1 DAY)
WHERE borrowernumber = <Patron A's borrowernumber>
4. Go to Circulation > Holds Awaiting Pickup, and find the hold in the
"holds waiting past their expiration date" tab
5. Click the "Cancel hold" button in the Actions column next to the hold
(do not check in the book)
6. Return to the bib record and look at Patron B's hold
--> Note that Patron B's hold is now an item-level hold and does not
have a waiting status
7. Cancel Patron B's hold
8. Place 2 new holds on the record: one for Patron A at the logged-in
library, and one for Patron B at a different library
9. Check in an item to fill Patron A's hold
10. Repeat steps 3-5 to expire and cancel Patron A's hold
11. Return to the Holds tab of the bib record and look at Patron B's hold
--> Note that Patron B's hold is now an item-level hold, and there is no
"Revert transit status" button
12. Place 2 bib-level holds for 2 different patrons (Patron A and Patron
B) on the same record, both for pickup at the logged-in library
13. Check in an item from that record to fill Patron A's hold
14. Check in the same item again. A modal will pop up, saying that the
hold is already waiting
15. In the modal, choose a cancellation reason and click "Cancel hold"
--> A new modal will pop up to fill Patron B's hold
16. Click "Ignore" on the modal for Patron B's hold
17. Return to the bib record and look at Patron B's hold
--> Note that Patron B's hold is now an item-level hold and does not
have a waiting status
18. Apply patch
19. Repeat steps 1-6
--> Note that Patron B's hold is still a bib-level/"next available" hold
20. Repeat steps 7-11
--> Note that Patron B's hold is still a bib-level/"next available" hold
21. Repeat steps 12-17
--> Note that Patron B's hold is still a bib-level/"next available" hold
Make sure correct behavior is unchanged:
22. Cancel Patron B's hold
23. Place 2 new holds on the record: one for Patron A at the logged-in
library, and one for Patron B at a different library
24. Check in an item from that record to fill Patron A's hold
25. Check in the same item again. A modal will pop up, saying that the
hold is already waiting
26. In the modal, choose a cancellation reason and click "Cancel hold"
--> A new modal will pop up to fill Patron B's hold
27. Click "Print slip, transfer, and confirm" on the modal for Patron B's hold
--> Confirm that the information on the slip is correct
--> Confirm that the hold is correctly put in transit
22. Set HoldsAutoFill and HoldsAutoFillPrintSlip to "Do"
23. Place a bib-level hold for the logged-in library
24. Check in an item from that bib
--> Confirm the information on the slip is correct
--> Confirm the hold is correctly assigned and set to waiting
25. Place a bib-level hold for a different library
26. Check in an item from that bib
--> Confirm the information on the slip is correct
--> Confirm the hold is correctly put in transit
27. Change the logged-in branch to match the hold pickup location
28. Check the item in
--> Confirm the information on the slip is correct
--> Confirm the hold is correctly assigned and set to waiting
29. Repeat steps 22-26
--> Confirm a correct hold slip pops up for Patron B's hold
--> Confirm that Patron B's hold is correctly put in transit
30. Cancel Patron B's hold
31. Place 2 bib-level holds for 2 different patrons (Patron A and Patron
B) on the same record, both for pickup at the logged-in library
33. Repeat steps 24-26
--> Confirm a correct hold slip pops up for Patron B's hold
--> Confirm Patron B's hold is correctly set to Waiting
34. Prove t/db_dependent/Circulation.t
35. Prove t/db_dependent/Koha/Holds.t
--> Tests pass
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit dc00e55a32)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test:
1. Apply this patch only
2. prove t/db_dependent/Koha/Holds.t
--> Tests pass
3. Apply the other patch
4. prove t/db_dependent/Koha/Holds.test
--> Tests still pass
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit d71f527202)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 8f359aa72c)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To prevent XSS
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 83db8696ca7a83aba224a0ab645f03447a96887b)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Also tidy
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 42d388c80fcdd98c2594ad7b111b8e40c991388a)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit 7a626d8d870039330889d6e48c3ae5ba848d85e9)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
(cherry picked from commit b315c0f2630ccd738fc811e13d1e95b11d3c8df1)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
These tests highlight the fact that the 'place hold' button visibility in the
search results page **does not** match the 'place hold' button visibility in
the detail page, given the same conditions.
Since that this is a known behavior, these tests should be commented out as they
are failing by design.
prove t/db_dependent/selenium/opac_holds.t
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit f8665c8d55)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Tests added to cover different use cases and combinations of circulation rules values for authenticated and unauthenticated users
At the moment, 2 tests are failing, documented on the [DO NOT PUSH] commit.
These 2 failing tests fail for the search results page but pass on the detail page counterpart. Ideally they should match, for consistency sake.
But this may be the use case "details page should be more correct, results page is always an approximation" mentioned by Nick.
More test combinations may be added in the future.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 3758a8c05e)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Before this patch we get all holds on a record and see if we can fill them with available items.
This means we check to fill holds that the item in questoion may not be able to fill, especially
in the case where no holds are allowed on the item type, this is wrong
To test:
1 - Find or create a biblio with two items of different item types
2 - Make sure one item type allows holds, and the other has:
"Default holds policy by item type"
Set to "No holds allowed"
3 - Set system preference "AllowRenewalIfOtherItemsAvailable" to "Don't allow"
4 - Check out the unholdable item to a patron
5 - Set a hold for a different patron on the next available item
6 - Confirm the checked out item can be renewed (don't renew, just view the checkouts page)
7 - Checkout the other item to a third patron
8 - Confirm the first item can still be renewed
9 - Set system preference "AllowRenewalIfOtherItemsAvailable" to "Allow"
10 - Confirm the item cannot be renewed now
11 - Apply patch, restart all
12 - Confirm the item can be renewed
13 - Set the item type to a type that allows holds
14 - Confirm the item can no longer be renewed
15 - Restore the item type
16 - Set system preference "AllowRenewalIfOtherItemsAvailable" to "Don't allow"
17 - Confirm the item can be renewed
18 - Check in the item from the third patron
19 - Confirm the item can still be renewed
20 - prove -v t/db_dependent/Circulation.t - test still pass
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 9cc622be1f)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Running cataloguing pluings (in cataloguing/value_builder) now requires
authentification.
This patch adds in failing unit tests a mock of C4::Auth::check_cookie_auth
Test with:
prove t/db_dependent/FrameworkPlugin.t t/db_dependent/Koha/UI/Form/Builder/Biblio.t t/db_dependent/Koha/UI/Form/Builder/Item.t t/db_dependent/Serials.t
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 3f8b7785cd703f89de140108eb9347bf33a0c764)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 5f7a9db936)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds tests for the different cases of `BranchTransferLimitsType`.
It also adds tests for the situation of the consumer sending both limit
criterias on the request.
The controller gets adjusted for this new behavior and the spec gets
documentation added about this.
Bonus: tests are added the right guidelines code, and
BranchTransferLimitsType gets mocked to avoid failures due to existing
data.
To test:
1. Apply this patches
2. Run:
$ ktd --shell
k$ qa
=> SUCCESS: All green, and tests pass!
3. Sign off :-D
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Fixed a typo in one of the return messages
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit e846641edd)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
rollback ineffective with AutoCommit enabled at /usr/share/perl5/DBIx/Class/Storage/DBI.pm line 1651.
I have not investigated more than that. Reaching this was already the
end of a long road... (see comment 0)
Test plan:
0. Do not apply this patch
1. select count(*) from branches
Note the value
2. Run
prove t/db_dependent/FrameworkPlugin.t
=> There is a warning
3. Repeat 1.
=> There are too many libraries!
4. Apply the patch, retry 1, 2, 3
=> No warning, no library added by the tests
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 1d2165f841)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Better to use Koha::Objects everywhere and have the same pattern for the
different related objects.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 7bce391462)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
+ attached items, subscriptions etc via the API as an alternative to the web interface: cgi-bin/koha/cataloguing/merge.pl
This is a slightly improved version of Zenos patch: I (domm) have converted the code in Koha::Biblio to a more DBICy style and packed it into a transaction (as requested in Comment 23)
Even the QA script is happy now!
To test:
1) you need an API user with the permissions "editcatalogue"
2) two records: one to be merged into (with biblio_id, eg 262) and another one from
which to merge (with biblio_id_to_merge, eg 9) which will be deleted!
both records may/should have items, subscription, subscriptionhistory, serial, suggestions
orders and holds
3) check both records via the web
4) Apply patch
5) Write a JSON file with inside the field 'biblio_id_to_merge' and the biblionumber from wihich to merge.
As example:
{
"biblio_id_to_merge" : 9
}
6) Execute an API call with correct headers and location. For example:
curl -s -u koha:koha --header "Content-Type: application/json" --header "Accept: application/marc-in-json"
--request POST "http://127.0.0.1:8080/api/v1/biblios/262/merge" -d @file.json
You must to setup the headers and to use a json file with parameters
7) The record with the id 9 is deleted now, the record with 262 has all items, etc attached,
the return is: return code 200 and the changed record 262 in marc-in-json format
8) It is possible to override biblio data with an external bib record. You need to put external bib record
into the json file in marc-in-json format. To write use the json file uploaded as example
You need to fill the fields 'rules' and 'datarecord'. The field 'rules' must contains 'override_ext'
To do the call:
curl -s -u koha:koha --header "Content-Type: application/json" --header "Accept: application/marc-in-json"
--request POST "http://127.0.0.1:8080/api/v1/biblios/XXX/merge" -d @file_with_recod.json
9) The record in 'biblio_id_to_merge' is deleted now, in biblio XXX now there are the bibliographic data
of field 'datarecord' of json file, the return is: return code 200 and the changed record XXX in marc-in-json format
10) Go into intranet and do a search. Select two or (better) more record.
11) Merge them; merge must be a success.
12) Test with prove -v t/db_dependent/Koha/Biblio.t
13) Test with prove -v t/db_dependent/api/v1/biblios.t
To test with curl the step 8 you can customize the json file attached in bugzilla.
The marc-in-json record inside follows the MAR21 standard
Sponsored-by: Technische Hochschule Wildau
Co-authored-by: Zeno Tajoli <ztajoli@gmail.com>
Co-authored-by: Thomas Klausner <domm@plix.at>
Co-authored-by: Mark Hofstetter <<mark@hofstetter.at>>
Signed-off-by: Jan Kissig <jkissig@th-wildau.de>
Bug 33036: Update of test number.
File ../biblios.t was update with a new subutest.
So we need this update to have a 'OK' after test running.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit c60a6d8cd9)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 49068e1537)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds tests for the Koha::Booking->store method.
Test plan
1) Run t/db_dependent/Koha/Booking.t and confirm they all pass
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 89fc242e97)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds basic unit tests for Koha::Biblio->bookable_items
Test plan
1) Run t/db_dependent/Koha/Biblio.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit c6892074b8)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds basic unit tests for Koha::Biblio->check_booking
Test plan
1) Run t/db_dependent/Koha/Biblio.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 17460a41a1)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds unit tests for the bookings relationship accessor on
Koha::Biblio objects.
Test plan
1) Run t/db_dependant/Koha/Biblio.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 4d8020258f)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds unit tests for the relations introduced in the new
Koha::Booking class.
Test plan
1) Run t/db_dependent/Koha/Booking.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 5384aea510)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 8e370de1d9)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds basic unit tests for the Koha::Item->check_booking
method.
Test plan
1) Run t/db_dependant/Koha/Item.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 3496ebee89)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Whilst writing the test, I found a minor flaw in the logic and fixed
that in CanBookBeIssued at the same time.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit df39d76f30)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds basic unit tests for the Koha::Item->find_booking
method.
Test plan
1) Run t/db_dependant/Koha/Item.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit dab5694dad)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds a simple unit test for the 'bookings' relation accessor
added to Koha::Item.
Test plan
1) Run t/db_dependant/Koha/Item.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 6fdc3fdba2)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Test plan: see next patch
Signed-off-by: Brendan Lawlor <blawlor@clamsnet.org>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit eff15066b2)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
When submitting the form to create a new patron we are doing a POST
memberentry.pl that is redirecting to moremember.pl
The selenium test is expecting for the end of the request to test the
page's title against "Patron details for ".
But it's only waiting for the POST response (302), not the GET
moremember that will display the patron's details.
You can simulate a slow server using cpulimit: `cpulimit -b -p $PID -l 1`
replacing $PID with the pid of the starman process.
Note that other tests are failing using 1%, but... baby steps.
The current failre:
# Failed test at t/db_dependent/selenium/basic_workflow.t line 122
Wide character in print at /usr/share/perl/5.32/Test2/Formatter/TAP.pm line 125
# 'Add patron (test cat description) › Patrons › Koha'
# doesn't match '(?^u:Patron details for test_patron_surname)'
The next one (NOT fixed by this patch):
# Failed test at t/db_dependent/selenium/basic_workflow.t line 256.
# '
#
# Checkouts (0)# # '# doesn't match '(?^u:Checkouts \(1\))'
t/db_dependent/selenium/basic_workflow.t .. 14/22 # Failed test at t/db_dependent/selenium/basic_workflow.t line 256.
# '
#
# Checkouts (1)
#
# '
# doesn't match '(?^u:Checkouts \(2\))'
t/db_dependent/selenium/basic_workflow.t .. 16/22 # Failed test at t/db_dependent/selenium/basic_workflow.t line 256.
# '
#
# Checkouts (2)
#
# '
# doesn't match '(?^u:Checkouts \(3\))'
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 4e166e07c1)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Test plan:
Run t/db_dependent/api/v1/acquisitions_orders.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 4032da3f96)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
[EDIT] As Victor discovered, the test with status new in subtest
'delete' needed the authorised user now.
Test plan:
Run t/db_dependent/api/v1/acquisitions_orders.t
Without the follow-up patch this should FAIL.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 8bb61c4f88)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 85f316f9c8)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Andrew Fuerste Henry <andrewfh@dubcolib.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
(cherry picked from commit 8b14aca56c)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
