I wrapped the use of the SMS::Send module in an eval to make failures graceful if it
is not present.
I also fixed an error with the number of tests in the SMS::Send tests.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
This code is intended to replace current value_builder code in 3.2, but
it does not affect it directly (yet) and is safe to include in 3.0.
This structure will be used to handle more complicated formats, like those
with checkdigits. Please note that "incremental" format is still STRONGLY
recommended because it will always perform the best, and most flexibly.
The desire to include other information (like branchcode) should compel
the proper use of the barcode generator to print the info ON the barcode,
not IN the barcode.
One of the nicer features of this structure is that you are able to
create a new barcode (of the same type) based on any previous Barcodes object.
That means you can create an array of 51 consecutive barcodes like:
my $x = C4::Barcodes->new('annual'); # for example
my @set = ($x);
for (1..50) {
push @set, $x=$x->new;
}
Importantly, this can happen without referencing the database after the
first constructor.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
Prior to this patch, ModBiblio() would append
item tags from the previous version of the bib record
to the incoming bib record before saving the results,
even if the incoming bib record already has embedded
item tags.
For example, if a bib is retrieved using GetMarcBiblio() then
saved using ModBiblio(), the caller was obliged
to delete any item tags first to avoid duplication.
ModBiblio() now deletes item tags supplied in the
incoming MARC record. This eliminates the possibility
of duplication, and removes any implication that
ModBiblio() can or should be used to modify item
records - ModItem() should be used for that.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
I changed getitemtypeimagedir to set a default on its argument so that it would not complain if not passed 'opac'.
I improved the documentation on the method.
I edited the t/icondirecotries.t test script to explicitly pass an argument to both getitemtypeimagedir calls.
- and I adjusted one line of whitespace to make similar things look similar
I added a test module for C4::Koha
I added a test module for C4::Koha::getitemtypeimagedir.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
ILS::Patron is where most of the intelligence for SIP's representation
is lodged. Currently there is difficulty with C4::Members functions.
GetMemberDetails is required for the needed flags, but it returns
empty structure on bad barcodes, where it should be undef.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
Improved C4::AuthoritiesMarc::GetAuthType() so that
it returns either a hashref (if the authority type exists)
or undef (if it does not exist). The same
accessor should not be used to either return a single
value or all values of a settings list. Note that
all existing clients of GetAuthType are expecting
either a single hashref or undef; none of them
expected the arrayref that could be returned by
the previous version of the accessor.
When BiblioAddsAuthorities is ON, addbiblio.pl
now checks the return value of GetAuthType and
no longer crashes as follows if the MARC framework
specifies an invalid authority type for a given subfield:
Can't coerce array into hash at .../cataloging/addbiblio.pl line 738.
No documentation changes.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
GetMemberDetails() returns only one hashref now,
not two. In all cases where the caller was
expecting two output values, the $flags return
was ignored anyway.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
Corrected and improved the description of the
return values of GetMemberDetails.
Also fixed errors reported by the podcorrectness
test.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
When returning an item that has an item-level hold on it,
CheckReserves() will not consider it waiting unless the
priority has been set to 0 (i.e., the item has specifically
been marked as filling the request.)
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
If an item is not for loan (i.e., items.notforloan is not null),
do not use it to fill a title-level hold request when
item is checked in. Prior to this patch, a notforloan item
could fill a request - CheckReserves() was checking only
the item's item type's not for loan flag.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
The in transit status now displays as such in the
OPAC search results. In the non-XSLT version, the status
is checked only for bibs having 20 or fewer items to avoid
extra hits on the database during result set presentation.
In the XSLT version, all items are checked.
Note that because an item's transfer status is not
stored in the MARC record, the transfer status
has no effect when limiting a search by item
availability. For a future version, the transit status
should be added to the Zebra index.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
Fixed rules for determining whether an item is
available for an item-level hold request. Create a
new function in C4::Reserves, IsAvailableForItemRequest(),
that checks whether an item is potentially available for
an item-level hold request.
An item is considered available if:
* it is not lost AND,
* it is not marked not for loan AND,
* it is not withdrawn AND,
* it is not damaged (unless the AllowHoldsOnDamagedItems syspref is ON), AND
* it is not on loan (unless the AllowOnShelfHolds syspref is ON)
Preventing a hold request on withdrawn items is bug 1739, as is
the new preference on whether to allow holds on damaged items.
Removing the condition that an item cannot be requested if
it has already been requested by another patron is the topic of bug 1710.
Note that this patch does not change the behavior where if
independent branches is on and the canreservefromotherbranches
syspref is off, a staff operator is prevented from placing
an item-level hold request on an item from a different branch.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
opac-mymessages.pl and opac-mymessages.tmpl generate an RSS feed of a patron's messages from the message_queue.
Some more methods in C4::Letters to let us pluck out the right entries in the queue.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
I've added methods to to C4::Letters to manage the database table
message_queue. This will let us keep track of messages sent
via email, sms, and rss to patrons. That way, we can show the history,
deal with failures, and reconstruct an RSS feed when needed.
misc/cronjobs/overduenotics.pl has been added. It prepares advance notices
and item due notices and stages messages to be sent in the message_queue
table.
C4::Overdues::Getoverdues now takes two optional arguments to tell it how
old of overdues to fetch.
Also, a C4::Circualtion::getUpcomingDueIssues method was added that
advance_notices.pl uses.
misc/cronjobs/process_message_queue.pl has been added. It sends the email
or SMS messages out of the message queue.
The C4::SMS module didn't work at all, and it has been rebuilt to use
an external perl module from CPAN, SMS::Send.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
This patch allows patrons to update their messaging preferences. This
includes methods in C4::Members to manage patron messaging preferences.
added cgi script to allow patron to edit their messaging preferences
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
I'd like to add another template parameter to geta_template_and user, but found it diffiult due to unreadability.
I stanadardized the whitespace in a portion of get_template_and_user,
alphabetized the parameters, finding a duplicate in one spot,
and then extracted the common template parameters that are set the same
regardless of template type.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
NOTE: This patch introduces code which generates an anonymous session when a patron first browses to OPAC.
This anonymous session contains a minimal amount of information including the results of a query to discover
all public lists/shevles. When the user logs in, the anonymous session is cleared and a new session created
for that user.
kohabug 1875 - fix error when editing a patron record
C4::Auth::checkauth was not distinguishing between a
'userid' input from an OPAC or staff login form and
a 'userid' input from (e.g.,) the patron editor.
Consequently, adding or editing a patron record would
result in Koha trying to log in as the new patron.
To resolve this, added a hidden input to all login
forms, 'koha_login_context', to explicitly signal
when a login is occurring. The value of this input
can be 'opac', 'intranet', or 'sco' - the value is
not used at present, but may be of use later.
C4::Auth - added debug flag to two warns
kohabug 1875 - create anonymous sessions only for OPAC
No need to create an anonymous session for the intranet.
set yuipath correct for login pages
When preparing the template parameters for a login form,
C4::Auth was overriding the value of yuipath set
by C4::Output::gettemplate(), thus causing 404 errors
if the 'yuipath' syspref was set to 'local'.
kohabug 1875 - avoid warns viewing lists anonymously
During an anonymous OPAC session, the $loggedinuser variable
is not set. As the undefined value causes warns in
C4::VirtualShelves::Page::shelfpage, for the purpose of the
shelfpage call the loggedinuser is set to -1, which should
not correspond to any real borrower number.
This is admittedly a hack to avoid digging through all
of C4::VirtualShelves to deal with lists viewed anonymously.
kohabug 1875 Refactoring of &ModShelf to avoid overwriting list owner needlessly
kohabug 1875 Avoid warning if can't find owner of shelf
Since virtualshelves.owner is not a true FK of borrowersnumber.number,
set ownername to '' if can't find the patron
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
With the removal of admin/finesrules.pl and admin/issuingrules.pl,
the functions str_to_base64() and base64_to_str() in C4::Koha
are no longer used.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
The C4::Circulation::TooMany() function, which determines
if a patron is at the maximum loan limit, has been
changed to work as follows:
1. Checks the issuing rule that would apply to the
prospective loan to see if a loan limit (maxissueqty)
has been set.
2. Counts the number of loans that the patron has
that would fall under that loan rule.
IMPORTANT: that means that if a specific loan rule
exists for the branch, patron category, and item type
in question, *only* that rule's maxissueqty will be
checked here - it will not go on to check whether
a less specific rule has a lower loan limit.
3. If adding one more loan would bring that count
over the limit, returns a "too many" error.
4. If the loan hasn't exceeded a specific limit, checks
whether a branch/patron category circ rule has
specified a loan limit, regardless of item type.
If the patron has already reached *that* limit, returns
the "too many" error.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
This routine retrieves the branch/patron category circulation
rules for a given branch and patron category. The return
value is a hashref containing the following key:
maxissueqty - maximum number of loans across all item types
This will first check for a specific branch and
category match from branch_borrower_circ_rules.
If no rule is found, it will then check default_branch_circ_rules
(same branch, default category). If no rule is found,
it will then check default_borrower_circ_rules (default
branch, same category), then failing that, default_circ_rules
(default branch, default category).
If no rule has been found in the database, it will default to
the built in rule:
maxissueqty - undef
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
Extended help on the alternate circulation rules
form to list the order of issuingrules lookup as
follows:
same library, same patron type, same item type</li>
same library, same patron type, default item type</li>
same library, default patron type, same item type</li>
same library, default patron type, default item type</li>
default library, same patron type, same item type</li>
default library, same patron type, default item type</li>
default library, default patron type, same item type</li>
default library, default patron type, default item type</li>
This includes modifying two routines in C4::Circulation to
follow this order: GetLoanLength() and GetIssuingRule().
The reason for this change is to have Koha exhaust all issuingrules
possibilities for a branch before checking the rules for
the default branch - this is consistent with what an admin
might expect from looking at the issuingrules forms, which display
settings a branch at a time, and is more consistent with how
circulation rules should work for indepdendent branches.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
The basic problem is that the SIP logic doesn't know where the
input is coming from. It might be a RAW socket, and it might
be telnet. If it is telnet, although the specs declare a
character set (from MS, unfortunately), they do not specify a telnet
implementation. So you might get telnet handshaking or
renegotiations in the middle of an otherwise peaceful session and
these should not be taken as SIP commands. Patches include a move
towards using $CRLF from Socket to avoid problems w/ foreign platform
mapping \n and \r to \015 or \012.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
C4::Reserves::_Findgroupreserves(), instead of
getting all requests for a bib, now gets only the
requests that are title-level (itemnumber is null)
or for that specific item. This prevents an item
from filling an item-level hold for a different item
attached to the same bib, which is the expected
behavior for item-level holds.
[LL Bug 22]
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
The section in KOHA_CONF was moved inside <config> and renamed
<ldapserver>. Perldoc updated to correspond. Tested with local
LDAP and existing test (t/db_dependent/Auth_with_ldap.t).
Patch can be applied with confidence based on comparison of 2 dumps:
perl -e 'use C4::Context; use Data::Dumper; my $context=C4::Context->new("./old_config.xml"); print Dumper ($context->{server}->{ldapserver}),"\n";'
and
perl -e 'use C4::Context; use Data::Dumper; my $context=C4::Context->new("./new_config.xml"); print Dumper (C4::Context->config("ldapserver")),"\n";'
These dumps reflect the way Auth_with_ldap accesses configuration info before and after.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
Prevent following crash when linking a bib heading to an
authority record if the bib heading has a subfield whose code
is ')' or any other regular expression metacharacter:
Unmatched ) in regex; marked by <-- HERE in m/) <-- HERE / at
/home/koha-pro/kohaclone/C4/Heading/MARC21.pm line 186.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
In any MARC record display in the OPAC or staff client
that displays the MARC tag numbers, the indicators are
now displayed as well, following the tag number. If an
indicator is a blank, it is displayed as '#'.
Add a function to C4::Koha, display_marc_indicators(), to
generate this display form of the indicators.
Refactoring note: the four scripts changed in this commit
have a lot of duplicate code that could be merged into
a MARC displayer class.
Documentation notes: screenshots of tagged MARC record
displays should be updated.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
Instead of having one input field for both indicators
of a variable field, the bib and authority MARC editor
now has an input field for each indicator. This has
two main advantages:
* it is easier to tell what the indicator values are,
even when the first indicator is a space
* it is easier to set the first indicator to blank
and the second indicator to non-blank.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
1. Non-ASCII characters in the 942$h (biblioitems.cn_class)
would cause an edit to fail and lead to a corrupt MARC record in
biblioitems.marc and biblioitems.marcxml. Fixed by
turning on Perl's UTF-8 flag for MARC tag parameters
processed by C4::Biblio::TransformHtmlToMarc
2. Do not add empty 006 and 007 fields if the corresponding
input fields are blank.
3. Make it possible to save '0' as a valid subfield
value.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
If a search contains a digit, it is almost certainly an identifier, and should
not be stemmed. This is particularly relevant for ISBNs and ISSNs, which
can contain the letter "X" - for example, C4::Search::_build_stemmend_operand
would reduce "014100018X" to "x ", which for a MARC21 database would bring
up irrelevant results (e.g., "23 x 29 cm." from the 300$c).
With this patch, supplying a search term that contains one or more digits
followed by "X" will no longer retrieve irrelevant results. This applies
to catalogs using Zebra and query stemming.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
Explicitly destroy ZOOM Query and ResultSet objects created
in C4::Search::SimpleSearch() - for long-running users
of SimpleSearch, such as link_bibs_to_authorities.pl or
the matcher used by the staging MARC import, the failure
to do this causes a memory leak in both the client Perl
script and (in the case of ZOOM ResultSet objects) a
corresponding resource leak in zebrasrv for the life
of the Z39.50 connection.
With this change, link_bibs_to_authorities.pl will be
be able to process large bib datasets without leaking
memory due to the Z39.50 lookups it does.
Similar changes are indicated for all uses of
ZOOM that could last longer than a single CGI
query.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
[1] Removed hardcoded path to original developer's
Koha configuration file; now checks KOHA_CONF.
[2] Now attempts to figure out if a task was successfully
added to the task queue; if it wasn't, the failure
is now reported in the task scheduler page.
[3] When traveling to the task scheduler page from a
saved report, the report in question is now
selected by default.
[4] Removed the button to edit a queued task; this is
not supported.
This patch is essentially a bandage; I've added a BUGS
section and some FIXMEs to the POD for C4::Scheduler
detailing some issues - a refactoring of the task
scheduler is in order at some point.
Signed-off-by: Joshua Ferraro <jmf@liblime.com>
