Similar to the full path test in sub themelanguage, this patch makes a
change in _get_template_file. This allows you to pass a template
outside the modules directory to get_template_and_user. (Note: the sub
badtemplatecheck already blocks bad paths.)
Especially, this would be helpful for plugins using templates. As can be
seen in Templates.pm, a change was made earlier to overwrite the filename
for a plugin in sub gettemplate. This exception can now be removed.
Also note the small change in Koha/Plugin/Base.pm; mbf_path is already
absolute and if we pass a full path, we do not need it. This allows use of
a regular Koha template or a shared template between plugins (as long as
badtemplatecheck allows the path).
What are the side-effects of this change?
[1] We should not pass absolute paths if we mean relative ones.
A follow-up patch deals with one occurrence in the codebase.
No regressions for regular use.
[2] Plugins can call get_template_and_user directly or go via get_template
in Koha/Plugin/Base (absolute paths don't go via mbf_path).
Note: replaced two single quotes in Auth.pm to show template name in test
description.
Test plan:
[1] Open some page on OPAC or staff client to trigger a template.
[2] Run t/db_dependent/Auth.t to verify not allowing some bad templates.
[3] Run t/db_dependent/Templates.t to verify an absolute path.
[4] Run t/db_dependent/Plugins.t to verify using templates in a plugin.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1) Ensure the useDischarge syspref is enabled
2) Log in to OPAC
3) Go to 'ask for a discharge'
4) Notice warns
5) Apply patch and refresh page
6) Notice warns are gone
Sponsored-by: Catalyst IT
Warnings reproduced in plack-error.log, with patch they are gone.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch displays the rental fee that will be applied for
renewing (near "Renew" link on patron's summary page)
To test:
- Apply patch
- Enable system preference 'OpacRenewalAllowed'
- Verify that you have item types with and without rental fee
for testing
- Issue items with an without rental fee to a patron
- In OPAC, display patron's summary page
- Verify in table 'Checked out', items with rental charge display an information as
appropriate (near the link 'Renew')
Patch rewritten because of merge issues with previous patches. 2017-04-21 mv
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch:
- hides the dashboard if there is no dashboard information to display
- changes '5.00 due' to '5.00 due in fines and charges' for translation
- uses Koha::Holds in place of deprecated C4::Reserves methods
To test, confirm all the right information for holds still shows, and
confirm the dashboard is hidden if there are no checkouts, holds, fines
or overdues.
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a summary to the OPAC once the user has logged in that
shows the users number of checkouts, overdues, holds pending, holds
waiting and total fines. We also have a syspref OPACUserSummary to turn
this feature on and off. Default is ON.
To test:
1) Apply patch and update database
2) Set up some checkouts, overdues, holds pending AND waiting and fines
for a user
3) Log into OPAC as that user, see summary. Confirm links all work as
expected
4) Confirm that if there are no checkouts / overdues etc that the link
disappears from the summary
5) Turn OPACUserSummary OFF and confirm the summary does not show on the
mainpage.
Sponsored-by: Catalyst IT
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
OPAC: Both SearchEngine "Elasticsearch" and "Zebra" should work with
OpacSuppression set to "yes"
NB: OPAC suppression is not implemented for Elasticsearch
Signed-off-by: David Bourgault <david.bourgault@inlibro.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
TEST PLAN
----------
1/ configure a working 'GoogleOpenIDConnect' account
See comment #5 which also links back to
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=16892#c3
2/ set 'OpacPublic' (under OPAC) to 'Disabled' and
'GoogleOpenIDConnect' (under Administration) to 'Yes'.
3/ log in user successfully via google-auth, observe redirect to
opac-user.pl (bad)
4/ apply patch
-- on kohadevbox remember to restart all! Plack is unforgiving. :)
5/ log in user successfully via google-auth, observe expected
redirect to opac-main.pl (good)
While I would normally suggest running koha qa test tools, because
this file doesn't end in .pl, it doesn't get picked up by them.
6/ perlcritic -4 opac/svc/auth/googleopenidconnect
-- notice this is a level better than required. :)
This also eyeballs easily well.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Follow the test plan in comment #20.
Also tweaked string, because it was really 'or' before too.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended text in added comment.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
From the plack-error.log:
CGI::param called in list context from package CGI::Compile::ROOT::usr_share_koha_masterclone_opac_opac_2dpassword_2drecovery_2epl line 129, this can lead to vulnerabilities. See the warning in "Fetching the value or values of a single named parameter" at /usr/share/perl5/CGI.pm line 436.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
TEST PLAN
---------
It is assumed you have set the OpacResetPassword to 'allowed',
and likely in combination with OpacPasswordChange to 'Allowed'.
You will have two patrons: one with and another without
any email address entered. You will want to test this test plan
with both patrons.
$ git checkout -b bug_18956 origin/master
Prepend the following as understood between step sections:
opac -> forgot password and then enter...
correct login/cardnumber, it will email
delete from borrower_password_recovery;
correct email, it will email
delete from borrower_password_recovery;
correct login/cardnumber && correct email, it will email
delete from borrower_password_recovery;
wrong login/cardnumber && correct email, error page as expected
delete from borrower_password_recovery;
correct login/cardnumber && wrong email, error page as expected
delete from borrower_password_recovery;
wrong login/cardnumber && wrong email, error page as expected
delete from borrower_password_recovery;
submit empty -- INTERNAL SERVER ERROR?!
delete from borrower_password_recovery;
-- None of the above step sections displayed email.
correct login/cardnumber, it will email
correct login/cardnumber again, but it leaks email address!
delete from borrower_password_recovery;
correct email, it will email
correct email again, but it leaks login/cardnumber!
delete from borrower_password_recovery;
$ git bz apply 18956
-- choose interactive, and choose this counter patch.
repeat the same test set again
-- no leaks will occur, error message pages returned should
be reasonable, code should read reasonably.
run koha qa test tools.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch removes the OPACShowBarcode syspref in favour of the new
columns settings option introduced by bug 16759.
On the upgrade step, it picks the value for OPACShowBarcode and uses it
to populate the columns_settings table.
To test:
- Verify the upgrade process maintains the current behaviour
Regards
Sponsored-by: Dover
Followed test plan and works as expected. Functionality of patch from bug 16759
appears intact too.
Signed-off-by: Dilan Johnpullé <dilan@calyx.net.au>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the option to show shelving locations on a separate
column. This is controlled by a new syspref, 'OpacLocationOnDetail',
which replaces 'OpacLocationBranchToDisplayShelving', adding a
conveniente 'column' option.
The new 'Shelving location' column is conveniently added to the columns
configuration entry added by bug 16759 for this purpose.
The current behaviour is preserved.
To test:
- Apply this patches
- Run the upgrade:
$ sudo koha-shell kohadev
k$ cd kohaclone
k$ perl installer/data/mysql/updatedatabase.pl
=> SUCCESS: Upgrade doesn't fail
- Have an item with shelving location set to something not void
- Have the item set home and holding libraries for testing purposes.
- Set 'OpacLocationBranchToDisplay' to 'home and holding libraries' [*]
- Visit the OPAC detail page for the record containing the item
=> SUCCESS: Both home and holding libraries are displayed.
- Loop through all OpacLocationOnDetail options (except from 'column', we leave it for later).
=> SUCCESS: Works as expected.
- Go to Administration > Columns settings
- Make item_shelving_location available in the OPAC section
- Reload the OPAC detail page
=> SUCCESS: No change
- Set OpacLocationOnDetail to 'on a separate column'
- Reload the OPAC detail page
=> SUCCESS: Shelving location is displayed on a separate column
- Sign off :-D
Sponsored-by: Dover
[*] For testing purposes
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The issuing rule retrieve to know if a hold can be placed on a record of
a list is not correct.
Test plan:
0/ With item-level_itypes = item level
1/ Define a item.itype=BK and biblioitems.itemtype=CF
2/ Create a default rule to allow on shelf holds
3/ Create a specific rule for CF with on shelf holds="If any
unavailable"
4/ Add this bibliographic record to a list and view the list
=> Without this patch you will not see "Place hold"
=> With this patch applied you will see the "Place hold" button,
respecting the correct issuing rule
Followed test plan, patches worked as described.
Note: Just to clarify the test plan slightly in step 4 where it says you will not see 'Place Hold' it means to
the left of the 'Save to another List' link below the item availability
in the opac-shelves.pl page. Not the 'Place hold' button in the grey
page header box.
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Now that we have a check client-side, nothing prevents us from a smart guy to
bypass it and force an invalid password.
This patch adds two new subroutines to Koha::AuthUtils to check the
validity of passwords and generate a password server-side. It is used
only once (self-registration) but could be useful later.
Moreover the 3 different cases of password rejection (too leak, too
short, contains leading or trailing whitespaces) were not tested
everywhere. Now they are!
This patch makes things consistent everywhere and clean up some code.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Indeed if RequireStrongPassword is set we need at least 3 characters to
match 1 upper, 1 lower and 1 digit.
We could make things more complicated to allow minPasswordLength < 3
but, really, 3 is already too low...
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This adds a new basket attribute (create_items) that can optionally be
set to override AcqCreateItem.
The following have been modified to reflect this (with the value of
create_items that causes them to behave differently in parentheses):
* Cancelling receipt of an order (receiving)
* Creating an order by hand or from MARC (ordering)
* Receiving an order (receiving)
* Showing orders with uncertain price (ordering)
* Showing orders (receiving)
* Showing acquisition details in the OPAC (ordering)
Test plan:
1) Create baskets with "Create items when:" set to ordering,
receiving, cataloging and unset.
2) Test each of the above for each of these baskets, verifying that
the basket-specific attribute overrides AcqCreateItem if set and
falls back to the syspref otherwise.
NOTE: A check of AcqCreateItem in opac-detail.tt was removed because it
was redundant; the code path in question cannot be triggered unless
create_items/AcqCreateItems is set to the correct value anyway.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Barbara Fondren <bfondren@roundrocktexas.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Have changed
my $last_page = $pages * ( $results_per_page - 1 );
to
my $last_page = ( $pages - 1) * $results_per_page;
which seems to fix the 'last' button offset! (Comment 10)
Will add the box to jump to a page in a separate patch.
Adding the pagination to the top on the staff client will be dealt with
in Bug 18916 as it is slightly out of the scope of this bug.
Signed-off-by: Lee Jamison <ldjamison@marywood.edu>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
See Comment 8.
Test:
When on first page of results, confirm that the 'First' and 'Previous'
buttons do not show. Confirm they come back on the second page and every
page after.
When on last page of results, confirm that the 'Last' and 'Next' buttons
do not show. Confirm they come back on all previous pages.
Check on both staff side and OPAC.
Sponsored-by: Catalyst IT
Signed-off-by: Lee Jamison <ldjamison@marywood.edu>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Same fix but on OPAC side. Same test plan
Sponsored-by: Catalyst IT
Signed-off-by: Dilan Johnpulle <dilan@calyx.net.au>
Signed-off-by: Your Full Name <your_email>
Signed-off-by: Lee Jamison <ldjamison@marywood.edu>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Adds a missing error flag to the template->param { } call.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1) Ensure the useDischarge syspref is enabled
2) Check out an item to a borrower
3) Log in to the OPAC as this borrower
4) Click the 'ask for a discharge' link in the nav
5) Click the 'Ask for a discharge' link
6) Notice you cannot be discharged because you have checkouts
7) Apply the patch, click the 'ask for a discharge' link in the nav
8) Notice the link has been replaced with an appropriate error message
9) Attempt to force the discharge URL:
/cgi-bin/koha/opac-discharge?op=request
10) Notice the message and you cannot be discharged.
11) Confirm that when you check in your item, the discharge link shows
again and works as expected.
Sponsored-by: Catalyst IT
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If the pref PatronSelfRegistrationEmailMustBeUnique is set ("consider"),
a patron is not allowed to register with an existing email address.
The existing code is wrong and reject a patron that is updating their
personal details with "This email address already exists in our
database.", even if the patron did not modify their email address.
This is caused by the query we made, we must search for patron with this
email address but who is not the current patron.
Test plan:
- Set PatronSelfRegistrationEmailMustBeUnique to "consider"
- Register a new patron with an existing email address
=> you should not be allowed
- Use a non-existent email address
=> You should be allowed
- Edit your patron details
- Modify some infos
=> Should pass
- Modify your email address with an existing one
=> You should not be allowed to do that
Followed test plan, patches worked as described
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Edit: fixed tab-for-space errors (tcohen).
Signed-off-by: Magnus Enger <magnus@libriotech.no>
New categories are added to the pulldown and work as expected.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
While PayPal is fairly universal, there is a plethora of online
payment system that are far more localized, servicing a single
country ( e.g. Bug 18968 ) or even a single city! Instead of
adding support for each and every one of these payment options
directly into Koha, it makes more sense to add the ability to
create online payment plugins.
Test Plan:
1) Apply this patch
2) Download and install the Kitchen Sink plugin version 2.1.1 or later
https://github.com/bywatersolutions/koha-plugin-kitchen-sink/releases
3) In the plugin options, enable the opac payments option
4) Create a patron with one or more fines
5) Log into the opac as that patron, note you now have the option
to pay online via KitchenSink ImaginaryPay
6) Make an online payment
7) Note the payment was processed correctly
Sponsored-by: Washoe County Library System
Signed-off-by: Kyle M Hall <kyle@gmail.com>
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Awesome enhancement! I know we want to add at least one Norwegian
payment service at some point.
I followed the test plan and everything works as advertised. Turning
off the "opac payments option" makes the option dissappear cleanly
from the OPAC. I have *not* looked at the code or done any
considerations about security.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
After the introduction of Koha::Authorities->get_usage_count with bug
9988, we can now replace the remaining occurrences of CountUsage.
At the same time we remove CountUsageChildren. This was an empty sub.
The typo get_count_usage in a subtest title is adjusted.
Test plan:
[1] Run t/db_dependent/Koha/Authorities.t
[2] Perform a search on authorities-home.pl and verify that you see
plausible numbers for 'used in xx records'.
[3] Click on Details for one authority. See the same number?
[4] Do the same as in 2/3 for Authority search on OPAC.
[5] Remember the authid and enter this in the record numbers box on
tools/batch_delete_records.pl. Select Authorities and click
Continue. The next form shows a column "Used in". Do you see
the same count again?
[6] Git grep CountUsage.
You should see just one hit in a comment that can be kept in
Koha/Authorities.pm.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a new Koha::Hold->cancel method and replaces the calls
to C4::Reserves::CancelReserve with it.
Test plan:
- Add and cancel holds
- Change priority of holds
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
For calls to SCOUserJS, SCOUserCSS, OPACUserCSS, AllowSelfCheckReturns,
OpacFavicon, ShowPatronImageInWebBasedSelfCheck, SelfCheckoutByLogin
Sponsored-by: Catalyst IT
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 12691: [FOLLOW-UP] Follow-up patch
This patch fixes merge conflicts and fixes the problems in Comment 7
QA tools complain about missing bracket, will be fixed in next followup
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 12691: [FOLLOW-UP] Missing bracket
Patch adds bracket to template file (Comment 16)
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 12691: [FOLLOW-UP] Fixing some logic
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Patches have been squashed for readability and 1 removal occurrence of
display_patron_image has been reintroduced.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
How to reproduce:
1. Get a multilingüal Koha like
http://demo1.orex.es/cgi-bin/koha/opac-changelanguage.pl?language=enhttp://demo1.orex.es/cgi-bin/koha/opac-changelanguage.pl?language=es-ES
2. Copy that urls to any web page in an other domain -it must be in some
host - and try to link to the spanish or english version,it will keep you in the same position.
3. Apply this patch and try again , everything should work fine .
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Replaces some code by a call to existing module.
Removes the $@->code and $@->message calls.
Test plan
[1] Run /cgi-bin/koha/unapi?id=koha:biblionumber:[number]&format=marcxml
[2] Try some variations.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
A recent change in Paypal has removed the previous default option of paying via debit or credit card without an account. To bring this option back, we need to send an additional parameter to the PayPal API.
Test Plan:
1) Enable paypal for your Koha instance
2) Ensure you are not logged in to PayPal
3) Attempt to pay a fine via PayPal
4) Not the the "Pay with Debit or Credit Card" option is missing
5) Apply this patch
6) Refresh opac-account.pl
7) Attempt to make a payment via PayPal again
8) Note the option "Pay with Debit or Credit Card" is now available
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: George Williams <gwilliams@nekls.org>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Tweaked logic to include error check for category
and branch being valid. If not, the user is told
about a configuration error to share with the
library. Otherwise, it should proceed as normal.
TEST PLAN is comment #35 still.
Though include a run with an invalid category
and/or branch code in the two system preferences:
GoogleOpenIDConnectDefaultBranch and/or
GoogleOpenIDConnectDefaultCategory
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Same Test plan as before.
Signed-off-by: Eugene Jose Espinoza <eugenegf@yahoo.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
10988 added the ability to log into the OPAC authenticating with
Google Open ID Connect. This extends it, by allowing an
unregistered patron to have an account automatically created
with default category code and branch.
This is accomplished by adding 3 system preferences.
- GoogleOpenIDConnectAutoRegister
whether it will attempt to auto-register the patron.
- GoogleOpenIDConnectDefaultCategory
This category code will be used to create Google OpenID Connect patrons.
- GoogleOpenIDConnectDefaultBranch'
This branch code will be used to create Google OpenID Connect patrons.
Sponsored-by: Tulong Aklatan
Signed-off-by: Eugene Jose Espinoza <eugenegf@yahoo.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Change parameters to a hashref.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Looks good to me.
Two calls in migration_tools/22_to_30 still in old style.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
$patronid is not necessarily set or does not match a valid cardnumber.
These cases must be taken into account to avoid the script to crash and
raise the following error:
Can't call method "unblessed" on an undefined value at
(...)/koha/opac/sco/sco-main.pl line 117
Test plan:
Hit sco/sco-main.pl and confirm that the error is gone with this patch
applied
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1 - Set 'OpacRenewalBranch' to various settings
2 - Renew an item for a ptron under each setting
3 - Confirm action_log entries reflect the correct branch for each
secnario
4 - prove t/db_dependent/Circulation/issue.t
Signed-off-by: David Kuhn <techservspec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Most of the time C4::Biblio::GetBiblioData is used to retrieve the title
and/or the author of a bibliographic record.
This patch replaces the easy occurrences of GetBiblioData, the ones
where the 2 joins are needed, but only data from biblio and biblioitems
table are.
Test plan:
It will be hard to test everything, I'd suggest a QAer to review this
patch and confirm that the difference occurrences of GetBiblioData have
been correctly replaced by calling Koha::Biblios->find or
$biblio->bibioitem
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Between patch submission and push, 2 new occurrences appeared in the
codebase.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
There was a bug that meant a very large offset in the search params
will cause the search script to run forever (or long enough to crash
the machine)
To test
1/ Get ready with sudo top so you can kill the thread before it causes
your machine to OOM
2/ Hit a page like yourdomain.com/cgi-bin/koha/opac-search.pl?q=1&offset=-9999999999999999999
3/ Notice the process runs for a long time
4/ Kill the process
5/ Apply the patch
6/ Hit the page again, notice the it loads (offset is set to zero)
7/ Do the same to search in the staff client
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended: changed -2 to 0 in opac-search.pl.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
GetMember returned a patron given a borrowernumber, cardnumber or
userid.
All of these 3 attributes are defined as a unique key at the DB level
and so we can use Koha::Patrons->find to replace this subroutine.
Additionaly GetMember set category_type and description.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
C4::Biblio::GetBiblio can be replaced with Koha Biblio->find
Test plan:
Import batch, view issue history, search for items, see the image of a
bibliographic record, modify and delete records in a batch
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To retrieve a biblionumber from an itemnumber, we can use:
Koha::Item->biblio->biblionumber
This is only what this patchset does.
Doing that we will be able to get rid of the
C4::Biblio::GetBiblionumberFromItemnumber subroutine.
Test plan:
- Acquisition module: cancel a receipt
- Export a record to CSV
- Modify items in a batch
Item's info should be correct
Other changes with be checked by QA team, by reading the code.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Found two calls in opac-issue-note.pl and svc/patron_notes.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The subroutine C4::Biblio::GetBiblioFromItemNumber was wrong for several
reasons:
- badly named, we can get biblio info from a barcode
- SELECT * from items, biblio and biblioitems
makes things hard to follow and debug, we never know where do come from
the value we display
- sometimes called only for trivial information such as biblionumber,
author or title
This patchset suggests to replace it with calls to:
- Koha::Items->find for item's info
- $item->biblio for biblio's info
- $item->biblio->biblioitem for biblioitem's info
Test plan:
Item's info should correctly be displayed on the following pages:
- circulation history
- transfer book
- checkin
- waiting holds
QA will check the other changes reading the code, it's trivial
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
