One of the RewriteCond directives in koha-httpd.conf was affecting
the wrong RewriteRule after its original RewriteRule was commented out
years ago.
_TEST PLAN_
0) Before applying patch, build Koha from source
*) make
*) make install (or make upgrade)
*) Copy or symlink etc/koha-httpd.conf to your Apache vhost directory
(and enable if you're on a Debian based system)
*) Restart Apache
1) Make sure that you have at least 1 bibliographic record in Koha
(URL like this http://server:port/cgi-bin/koha/opac-detail.pl?biblionumber=1)
2) Go to http://server:port/bib/1
3) Note that you get a 404 error
4) Apply the patch
5) Rebuild Koha from source as per step 0
6) Go to http://server:port/bib/1
7) Note that you now see the same page as you would if you went to
http://server:port/cgi-bin/koha/opac-detail.pl?biblionumber=1
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Problem raised by bug 17762: IssueSlip should return if the params are
not valid.
The tests contain 2 FIXME to highlight this problem already, it's time
to fix them.
Note that, theoretically, this change may produce software error. Indeed
the caller expecting a hashref (letter) will access the "content" key.
But that should not happen.
Test plan:
Tests must return green
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Once again, after bug 16154 and bug 16259 we need to remove more
occurrence of CGi->param called in list context.
Refer to bug 15809 for more information.
Test plan:
Make sure you do not see the error on the modified scripts.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
Run t/db_dependent/ImportBatch.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Make it more explicit by adding join statements.
Test plan:
See next patch for adding a unit test.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1 - Import a batch with some items
2 - Delete one of the imported items
3 - Browse to Tools->Staged MARC record management
4 - Click (Create label batch) for the batch you imported
5 - Recieve an error
6 - Apply patch
7 - Click (Create label batch)
8 - Batch is created with remaning items from the import
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The new subtest in Reserves.t does not need its own transaction.
Move the original rollback to the very end of the test.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
https://bugs.koha-community.org/show_bug.cgi?id=18478
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Make sure to build necessary letters
Fix awkward construction
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This method was not previously covered, we don't change it , but
no reason to throw away these tests to ensure messages are created
as expected
To test:
1 - Apply this patch first
2 - Prove t/db_dependent/Reserves.t
3 - Last tests fail
4 - Apply other patch
5 - All tests should pass
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
It seems that for HOLD and DUE (and maybe more) notices we rely on
C4::Letters::SendQueuedMessages
to populate the correct address.
This patch adjust that subroutine to correctly populate the field and/or
fail messages if no SMS provider available
To test:
1 - Define a messaging prefs for a patron to recieve hold notices via
SMS
2 - Ensure you have defined an SMS message for 'HOLD' letter
3 - Set an SMS alert number for patron
4 - Set the SMS::Send driver to 'Email'
5 - Fill a hold for the patron
6 - Check the db and note the address is null
7 - run process_message_queue.pl
8 - Check db - address is null and message pending
9 - Apply patch
10 - run process_message_queue
11 - Message to_address should be populated and message sent
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1 - Set SMSSenDriver to 'Email'
2 - prove t/db_dependent/Letters.t
3 - Tests fail
4 - Apply patch
5 - prove t/db_dependent/Letters.t
6 - Less tests fail (should be 2 sms test failures)
7 - Set SMSSendDriver to another value or blank
8 - prove t/db_dependent/Letters.t
9 - Tests pass
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When you search an authority in Authority search, this search is not saved in Search history.
EnableOpacSearchHistory is enabled
Steps to test:
1- Login your account (opac)
2- Search an authority in Authority search
3- Go to Search history -> Authority
4- It says "Your authority search history is empty"
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
There was a typo in the permission code
Test plan:
Try to access the marc modification templates admin page with the
marc_modification_templates permission (and not all tools permissions)
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Sounds like it is caused by bug 13726.
It is not possible to delete a currency, even if not used by any vendors
Test plan:
Try and delete currencies used or not by vendors.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
1. Run: debian/scripts/koha-create --request-db
-> Without patch you see the getent error message
-> With patch you see usage and "Missing instance name" message
Signed-off-by: Dilan Johnpulle <dilan@calyx.net.au>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Followed test plan and the city value updates in the quick add form correctly.
Signed-off-by: Dilan Johnpulle <dilan@calyx.net.au>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1 - Fill out some fields in quick add
2 - Switch to full form and clear fields
3 - Switch back and fields are still populated
4 - Fill a field in long form
5 - Switch to quick add and clear it
6 - Save
7 - Value set in 4 is saved
8 - Apply patch
9 - Repeat 1-6 - values should be cleared and not saved
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1 - Add password to BorrowerMandatoryField
2 - View quick add form
3 - See confirm password twice
4 - Apply patch
5 - See confirm password once
6 - Add password to QuickAddFields
7 - Confirm one confirm field
8 - Remove password form BorrowerMandatory field
9 - Confirm there is one confirm field and password fields are not
required
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
0) Apply the patch
1) git grep Data::Printer
-> should return no results
2) Go to Reports -> Use saved - should work fine
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
See bug 18552. When we resolved the housebound_role bug, the hash got
filled correctly again. And this revealed that the (second) call to
Koha::Patrons->find was not appropriate. It can be removed, as Jonathan
explained on the report.
Note: Commit 95429af685 added this call, but
it was hidden until the template variable hash got fixed.
Test plan:
Restart Plack and go to patron details again.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 17196 move the marcxml out of the biblioitems table.
That will break SQL reports using it.
It would be handy to propose an automagically way to convert the SQL
reports.
We do not want to update the reports automatically without user inputs,
it will be too hasardous.
However we can lead the user to convert them.
In this patchset I suggest to warn the user if a report is subject to be
updated.
TODO: Add a way to mark this job done (using a pref?) to remove the
check and not to display false positives.
Test plan:
- Create some SQL reports (see https://wiki.koha-community.org/wiki/SQL_Reports_Library)
- Go on the report list page (/reports/guided_reports.pl?phase=Use saved)
- For the reports using biblioitems.marcxml you will see a new column
warning you that it is obsolete
- Click on update link
=> that will open a modal with the converted SQL query
- Click on the update button
=> you will be informed that the query has been updated
If all the reports are updated, the new column "Update" will no longer
be displayed.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
The same as first patch, but also with advanced search form in header hidden
on page load - see comment 4
Issue with advanced search form is gone.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Philippe <philippe.audet-fortin@inlibro.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In member search page, the result table is in Ajax so fully managed by Javascript. There is also a yellow dialog message prepared in HTML.
Thoses elements are hidden by JS code : ie $("#patron_list_dialog").hide().
The problem is that the static page is first loaded an displayed then the JS code runs an hides the elements.
On a low performance computer, this action is visible and looks like there is a blinking yellow message.
I propose to hide with CSS so that thoses elements are not displayed in static page and are there shown in dynamic JS code.
Test plan :
Check display is unchanged :
- Go to home page /cgi-bin/koha/members/members-home.pl
- Perform patron search from header search box
- Perform patron search by clicking on a letter
- Perform patron search from filters (left of results table)
- Select a patron and add it to a list => you see the yellow message
Yellow message does no longer appear with this patch.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Philippe <philippe.audet-fortin@inlibro.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Apply the change from bug 15553 to InstallAuth.pm too.
Test plan:
[1] Remove all cgisess_* files from your /tmp directory.
[2] Remove directory /tmp/cgisess_koha_[your instance], if there.
[3] Run the webinstaller
/cgi-bin/koha/installer/install.pl?step=1&op=updatestructure
[4] Check if you have cgisess_ files in /tmp/cgisess_koha_[your instance].
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Simplify regex for removing table name.
No need to escape a dot between the square brackets. No need to specify a
number of 1 between parentheses.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Description on editing csv profiles says:
"You can also use your own headers (instead of the ones from Koha) by
prefixing the field name with an header, followed by the equal sign."
So the header should be optional, but in fact it's mandatory. Also the
regular expression to cut table name from beginning of db column is not
right.
Test plan:
0. Don't apply the patch
1. Make two CSV profiles for exporting late issues
a) SUPPLIER=aqbooksellers.name|TITLE=subscription.title|ISSUENUMBER=serial.serialseq|LATE SINCE=serial.planneddate
b) aqbooksellers.name|TITLE=subscription.title|ISSUE NUMBER=serial.serialseq|LATE SINCE=serial.planneddate
2. Export late issues, profile a) works as expected, profile b) doesn't
3. Apply the patch
4. Both profiles should work
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The function that switches between quick add/fulll form assumes labels
are followed by values - patron_attr don't follow this pattern. This
patch just moves the hidden input field
To test:
1 - Have some patron attributes (with/without auth values set)
2 - Add them to QuickAddFields (patron_attr2 for example)
3 - view quick add form and set some values
4 - Switch to full form, values not transferred
5 - Switch to quick add, view values, save
6 - Values are not saved :-(
7 - Apply patch
8 - Repeat 3 - 5
9 - Values are transferred and saved :-)
Signed-off-by: Peggy Thrasher <p.thrasher@dover.nh.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Like:
Problem = a value of AutoResumeSuspendedHolds has been passed to param without key at /usr/share/koha/masterclone/C4/Templates.pm line 137.
Problem = a value of relatives_borrowernumbers has been passed to param without key at /usr/share/koha/masterclone/C4/Templates.pm line 137.
Problem is functions returning undef in list context (in this case
housebound_role).
No need to call Patrons::find a second time.
Note: The call of GetDebarments in the first patch suffered from this too.
It is in a fine place now too. But strictly speaking, should not have been
moved.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To test:
1) Go to a borrowers details page and create a manual restriction
2) Notice the restriction shows at the top of the page but the
restriction tab says the member is currently unrestricted
3) Apply patch and refresh page
4) Restrictions tab should now correctly show debarments and correct
number is shown
5) Confirming deleting and adding restrictions still works as expected
Sponsored-by: Catalyst IT
Followed test plan, works as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
To recreate:
1 - Place a hold for pickup at Midway
2 - Enable independentbranches
3 - Login to staff interface as admin without superlibrarian status from
a different branch
4 - View the holds for the title you placed a hold on
5 - The hold placed in step 1 should show a dropdown with current branch
as pickup location, current branch is the only in that dropdown
6 - Verify it displays correctly for superlibrarian
7 - Apply patch
8 - The correct pickup location should show and not be editable
9 - Verify it is a dropdown
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If a record has any holds on it, the SIP2 item information response will
return a value of 08 "waiting on hold shelf" even if the item is not
actually a waiting hold. This is clearly a bug.
Test Plan:
1) Find an item that is not a waiting hold, but whose record has one or
more holds.
2) Issue a SIP2 item information request
3) Note in the response, the circulation status field is '08'
4) Apply this patch
5) Repeat the item informationr request
6) Note the code is now '03' ( available )
7) Check the item in to fill the hold
8) Repeat the item information request
9) Verify the circulation status is now '08'
Followed test plan, works as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Regardless of whether the phone transport has been selected for a given
overdue action or not, the Talking Tech outbound script generates and
sends a line for that action.
Test Plan:
1) Enable Talking Tech
2) Create one or more overdue actions without a phone transport selected
and one or more with the phone transport selected
3) Generate the overdues csv file to send to Itive
4) Note the csv file has lines for actions that do not have the phone
transport selected
5) Apply this patch
6) Repeat step 3
7) Note the csv file now only has lines for actions that have the phone
transport selected
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
1. Check out an item to one patron whilst having that item also being on
hold to another patron
2. Check the item back in
3. Notice a modal box appears greying out the background with three
buttons 'Confirm hold', 'Print and confirm' and 'Ignore'. Click confirm
and notice that the page refreshes and no yellow warning messages are
able to be displayed
4. Now that you have checked the item in. Try checking it in a second
time by clicking on the Checkin tab and writing in the barcode.
5. The modal box will appear again, this time with three buttons
'Confirm', 'Print and confirm' and 'Cancel hold'
6. Click the 'Confirm' button and the page refreshes again and the
yellow warning message hidden by the modal box is not properly displayed
to the user. Notice that the focus is on the barcode input box.
7. Apply patch
8. Try checking in the item again, and this time after clicking the
'confirm' button on the modal box notice that the yellow warning message
is displayed telling the user the item was "Not checked out". Also
notice the focus is in the barcode inputbox.
9. Drop the hold on the item and make sure it is not checked out.
10. Repeat steps 1 and 2 and notice after clicking the 'Confirm hold'
button the page refreshes and the item is successfully checked back in.
With the focus on the barcode input.
11. View koha-tmpl/intranet-tmpl/prog/en/modules/circ/returns.tt and
notice that the button on line 345 does not use an onclick parameter
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended-patch: remove spaces
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
With plack, when creating a new authority framework from another, you get the error :
Can't call method "prepare" on an undefined value at (...)/src/admin/auth_tag_structure.pl line 267.
Looks like plack does not like when the var $dbh from the script is called inside a sub.
This patch adds a local var $dbh inside sub duplicate_auth_framework(), like in sub StringSearch().
Also correctes a redefine of my $sth.
Test plan:
- Go to Administration > Authority types
- Create a new type
- On this new type click on Actions > MARC Structure
- Select another type and click OK
=> You must get a table filled with the tag structure
Check with and without plack
You may not be able to reproduce the error with plack.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
* Any extended patron attributes will cause the update to fail as those attributes don't exist in the 'borrowers' table
* The update of the extended patron attributes is already dealt with in checkpw_ldap()
* Ergo: just skip those attributes here
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
I did not test this patch but code looks good
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If using MarcItemFieldsToOrder with AcqCreateItem = Create,
the order and the items will be created, but they will not be linked via aqorders_items!
Test Plan:
1) Enable creation of items when ordering
2) Set up MarcItemFieldsToOrder
3) Upload an order record that uses the fields in step 2
4) Create a basket and add the records from the file
5) Note the order and items are created, but no rows in aqorders_items are created
6) Apply this patch
7) Repeat steps 3-4
8) Note the rows in aqorders_items are created!
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marci Chen <mchen@mckinneytexas.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch adds a default configuration entry for elasticsearch. It will
add localhost:9200 to the server subsection, and koha_instance (replacing instance
for the corresponding instance name) for the namespace.
To test:
- Apply the patch
- Copy the file to the /etc/koha dir:
$ sudo cp kohaclone/debian/templates/koha-conf-site.xml.in /etc/koha
- Create a new instance:
$ sudo koha-create --create-db test
=> SUCCESS: /etc/koha/sites/test/koha-conf.xml includes the mentioned section:
<elasticsearch>
<server>localhost:9200</server>
<index_name>koha_test</index_name>
</elasticsearch>
- Sign off :-D
Note: As the use of ES is syspref driven, this default entry doesn't have any use
until ES is installed and SearchEngine set to Elasticsearch. So it doesn't hurt
but will help end users test the ES integration. Advanced users will take care of
this config entry manually (pointing to external servers/clusters, etc).
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Currently, the value of compareinv2barcd is used to determine if the
Seen column, the Select/Clear all buttons and the Mark seen buttons are
displayed. But if we scanned barcodes, we already marked items as seen.
So we should only display these buttons when we did not upload barcodes.
Test plan:
[1] Upload a barcode file. Check that the result form does not show
the buttons.
[2] Generate an inventory list, so do not upload a barcode file. Verify
that you still see the buttons.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
A part of the confusion around the inventory script may arise from the
fact that the form offers several options that are only used under
certain conditions. This patch hopefully rearranges a few options more
logically and only offers options when appropriate.
The barcode fieldset now also contains Compare barcodes and Do not check in
checkboxes. These are meaningful when a barcode file is uploaded.
The fieldset Item location filters (new name) contains fields that are
always used. Same for tne only control left under Additional options,
Export to CSV.
The fieldset Optional filters depends on the status of the barcode file
and the Compare checkbox. It is now shown or hidden depending on what
you select: if you do not upload a file, it is shown; or if you upload
a file and check Compare, it is shown. Otherwise we hide it, since the
script will not look at these values. Under this fieldset last inventory
date and Skip items on loan are added, since their behavior is the same
as the various item statuses.
Test plan:
In this test plan we test both the script changes from the previous patch
and the interface changes here. We follow the three main scenario's as
mentioned in the previous patch.
[1] First we prepare a few test items.
Pick two biblios A, B and create five items say A1,A2,B1,B2,B3.
Pick a not-existing callnumber range you want to test and move these
five items there. Add barcodes too (say A1..B3).
Edit one item A1 to a not-existing notforloan status (doing this on
the mysql command line is fastest).
Like: update items set notforloan = '9' where barcode='A1';
Now simulate that we did not add/edit these items today:
update items set datelastseen='2017-01-01' where barcode in ('A1','A2','B1','B2','B3');
Note: We need this when comparing with last inventory date in the last
scenario.
Scenario 1 (no barcodes uploaded)
[2] Enter the callnumber range on inventory form.
Verify that "Set inventory date", Compare barcodes and "Do not check
in" are disabled on the form. Check that you see the Optional filters
box.
Submit the form. Verify that you see all five items.
Do the same. Check Export to CSV. Check result file contents.
Scenario 2 (upload barcodes, do not compare)
[3] Create a barcode file with the barcodes of A1, A2 and B1. Add another
existing barcode outside the test callnumber range.
After uploading this file, verify that "Set inventory date", Compare and
"Do not check in" are enabled. The Optional filters should be hidden.
Leave "Set inventory date" to today. Enter the callnumber range again.
Submit the form.
What do we expect? Four items should have been updated (alert). We
should see barcode A1 with problem Unknown status. We should see
also the barcode from the other range (Found in wrong place).
Repeat this step with the same file. But now export to CSV. Verify that
you see two barcodes with problems again in the csv file.
Scenario 3 (upload barcodes, compare)
[4] Create another barcode file with barcodes of B2 and one existing barcode
outside the test callnumber range.
After uploading this file, check the Compare checkbox. Verify now that
the Optional filters box is displayed again.
Leave "Set inventory date" to today. Enter the callnumber range again.
Also set "Last inventory date" to today (important!).
Submit the form.
What do we expect now? Two items should be updated (see alert).
We should see barcode B3 with problem Missing. We should also see the
barcode from the other range (wrong place).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch contains the following changes:
[01] Label "Inventory date" reworded to "Last inventory date", adding a
small explanation for its purpose.
[02] Restructured the results: it was an array with items and possible
error messages. Multiple messages duplicated individual items. Now the
results are in a hash, pulling all error messages for one item together.
At the end of the script they are copied to an array. (A helper sub
additemtoresults is added in this regard.) We no longer use array
@items_with_problems.
[03] Both datepickers are no longer connected to the same class. This
prevents changing the set date by filling the last inventory date.
[04] Input markseen in the template and $markseen in the script are
no longer needed.
[05] The paragraph before the detail link in the results table in the
Title column has been removed. Same for problems column. This makes
vertical spacing consistent.
[06] Problem status 'missingitem' is no longer used; the missing items
are marked as 'not_scanned'. Two additional statuses are: no_barcode and
checkedout.
[07] Removed unused $itemtype, $totalrecords and $count. We use variable
$moddatecount to report a count to the template.
[08] The script updated scanned items twice. The first time with ModItem
and the second time with ModDateLastSeen. The second call is removed.
[09] If a book is checked in, we do no longer return an error message when
the checkin is successful (ERR_ONLOAN_RET). The updated datelastseen is
passed to the results.
[10] $wrongplacelist is renamed to $rightplacelist. It is only built when
we need it. (Same for inventorylist now.)
[11] Datelastseen (last inventory date) is always used for building the
inventory list. It allows you to process partial barcode lists or make
a list of items not seen after some date. We do no longer use variable
$paramdatelastseen.
[12] The section where items.datelastseen was compared with the inventory
date has been removed. Scanned items were already updated; to get items
seen before some date, you can now use last inventory date without passing
barcodes.
The form can mainly be used for the following three cases:
[1] Prepare an inventory list or csv file; we do not upload barcodes.
[2] Update items for uploaded barcodes without comparing to inventory.
Last inventory date is useless in this case.
Errors wrongplace, checkedout and changestatus are reported.
Use this scenario for partial scanned barcode lists (all but last).
[3] Update items for uploaded barcodes and compare to inventory, filtered
by an optional last inventory date.
Apart from the errors mentioned under [2], this also reports
not_scanned ("missing") and no_barcode.
Use this scenario too for the last partial barcode file (together with
inventory date).
Test plan:
See next patch ("Interface changes").
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
