The "Select a list of records" should only be available for biblio
records. But if the page is accessed using the back button of the
browser it will be displayed for authorities as well.
Test plan:
- Make sure you have at least one template for MARC Modification
- Also make sure you have at least one list of biblio records
- navigate to Cataloging -> Batch record modification
- Check the "Authorities" radio button
- Select your template and continue
- No records were modified -> use your browser's Back button to go back one page
- The "Authorities" radio button should still be selected
=> Without this patch you see the tab "Select a list of records"
=> With this patch applied it's hidden when the page is loaded
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch changes confusing wording in the debit types table. Column heading No issues charge has been changed to Blocks checkouts? and the column data is now simply Yes/No rather than Included/Not included
Test plan:
1) Apply patch
2) Navigate to debit types in administration
3) The column in the table should exist as described above
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Currently the debit types to be excluded from the noissuescharge syspref are
hardcoded in non_issues_charges which gives no flexibility for selecting which
debit types should be included. This patch amends the subroutine to use a
database flag to identify which debit types should be included. It also adds a
column to the table in the Debit Types area of System Preferences which shows
which debit types are included. The ability to edit all debit types has been
added rather than just the non-system ones and the flag to include/exclude the
debit type from noissuescharge can be changed by clicking that edit button.
Test plan:
1) Choose a patron and add some fines to this patron that have different debit_types
2) Navigate to system preferences and observe that currently you can only amend
the noissuescharge included debit types using three preferences:
ManInvInNoissuesCharge, RentalsInNoissuesCharge, HoldsInNoissuesCharge
3) Apply both commits attached to this bug
4) Navigate as above and observe that these three system preferences are now gone
5) Navigate to Debit Types in System Preferences, the table should have a column
called No issues charge that shows whether a debit_type is Included or Not
included
6) Click the edit button and there should be a checkbox for Included in
noissuescharge
7) Change some of the debit_types using this option and observe that the patron
you added fines to will either be blocked from checkouts or able to checkout
depending on which debit_types you include and the value of these fines.
Mentored-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This commit updates the database to add a new flag to show which debit_types are
included in noissuescharge. It also deletes the current sysprefs that are
hardcoded for this as these are now redundant.
Test plan:
1) Choose a patron and add some fines to this patron that have different debit_types
2) Navigate to system preferences and observe that currently you can only amend the
noissuescharge included debit types using three preferences: ManInvInNoissuesCharge,
RentalsInNoissuesCharge, HoldsInNoissuesCharge
3) Apply both commits attached to this bug
4) Navigate as above and observe that these three system preferences are now gone
5) Navigate to Debit Types in System Preferences, the table should have a column
called No issues charge that shows whether a debit_type is Included or Not included
6) Click the edit button and there should be a checkbox for Included in noissuescharge
7) Change some of the debit_types using this option and observe that the patron you
added fines to will either be blocked from checkouts or able to checkout depending
on which debit_types you include and the value of these fines.
Mentored-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This adds the document type (suggestions.itemtype) to the list
of accepted suggestions when creating an order from a suggestion.
To test:
* Add some suggestions and make sure to pick different document types.
* Accept those suggestions in the staff interface.
* Go to acquisitions
* Create a basket
* Add an 'order from a suggestion'
* Verify that the list shows the 'document type' nicely and correctly
* Order one, all good? sign off.
Signed-off-by: Juliet <jheltibridle@rcplib.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Removed IS_OPAC param from AuthorisedValues.GetByCode
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a Frameworks pluing to allow fetching the framework text
and displays this on the intranet details page
To test:
1 - Apply patch
2 - View a record details page in staff
3 - Confirm you see the framework name
4 - prove -v t/db_dependent/Template/Plugin/Frameworks.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
As we use single quotes in general and also in breadcrumbs and page
title on this specific page, we shoudl also use them for the main
content:
Are you sure you want to delete 'T'?
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
https://bugs.koha-community.org/show_bug.cgi?id=33500
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
https://bugs.koha-community.org/show_bug.cgi?id=33500
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
https://bugs.koha-community.org/show_bug.cgi?id=33500
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
https://bugs.koha-community.org/show_bug.cgi?id=33500
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch renames 'Patron restriction' to 'Patron restriction type' in the context of custom restriction type administration.
To test:
0. Apply patch
1. Enable PatronRestrictionTypes
2. Go to Administration
3. Check the name, spelling/grammar of the following elements
* Section name
* Section caption
4. Click 'Patron restriction types'
5. Check the name, spelling/grammar of the following elements
* Title of the page (in the browser tab)
* Breadcrumb
* Left hand side menu
* 'New' button
* Page heading
6. Click 'New restriction type'
7. Check the name, spelling/grammar of the following elements
* Title of the page (in the browser tab)
* Breadcrumb
* Page heading
8. Fill out the form and click 'Save' to create a new restriction type
* Dialog message ('Restriction type added')
9. Click 'New restriction type'
10. Enter the same code as last time
* Warning ('Restriction type code is already in use')
11. Click 'Cancel'
12. Click 'Edit' next to one of the types
13. Check the name, spelling/grammar of the following elements
* Title of the page (in the browser tab)
* Breadcrumb
* Page heading
14. Without changing anything, click 'Save'
* Warning ('Restriction type label is already in use')
15. Change the label and click 'Save'
* Dialog message ('Restriction type updated')
16. Click 'Delete' next to one of the types
17. Check the name, spelling/grammar of the following elements
* Title of the page (in the browser tab)
* Breadcrumb
* Page heading
* Delete button
18. Click 'Delete this restriction type'
* Dialog message ('Restriction type deleted')
Signed-off-by: Marius Mandrescu <marius.mandrescu@inLibro.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
https://bugs.koha-community.org/show_bug.cgi?id=33500
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch replaces the uses of first_valid_email_address with
notice_email_address in waiting_holds, transferstoreceive, clubs and
sendbasket so that we take EmailFieldPrimary into account for these
notices too.
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes unnecessary references to
AuthorisedValues.GetCategories:
SET AuthorisedValuesCategories = AuthorisedValues.GetCategories
The AuthorisedValuesCategories variable is not used.
To test, apply the patch and go to Tools -> Patron clubs.
- If necessary, create a club template with "Allow public enrollment"
enabled.
- Create a new club. The club creation process should work correctly.
- Open a patron account for checkout and confirm that you can enroll the
patron in the new club via the "Clubs" tab.
- Log in to the OPAC and confirm that you can successfully enroll
yourself in the new club via the "Clubs" tab on your patron summary
page.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates various templates so that they use the new WRAPPER
for displaying breadcrumbs.
To test, apply the patch and test each page and its variations.
Breadcrumbs should look correct, and each link should be correct.
- ILL requests
- New ill request
- Manage ill request
- Bibliographic record ->
- Place hold
- Place multiple holds
- Tools ->
- Comments awaiting moderation
- Approved comments
- Suggestions
- New suggestion
- View suggestion
- Edit suggestion
- Lists
- Public Lists
- Private lists
- New list
- Edit list
- Transfer list
- View list contents
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes minor changes to the way this page handles switching
between authority and bibliographic record batch operation in order to
ensure that the list tab is correctly shown or hidden and that the list
tab selection isn't transmitted when an authority batch is submitted.
This patch also changes the labels on the "record type" fields to fix
the incorrect use of the abbreviated "biblios" in favor of
"Bibliographic."
To test, apply the patch and go to Cataloging -> Batch record
modification
- With the "Bibliographic records" selected, click the "Select a list
of records" tab."
- Select the "Authority records" radio button.
- The "Select a list of records" tab should disappear, and the "Upload a
file" tab should now be selected."
- Select the "Bibliographic records radio button.
- The "Select a list of records" tab should reappear, and the "Upload a
file" tab should be selected.
- Test all combinations of form submissions to confirm that each works
correctly:
- Bibliographic records by upload, list, and biblionumber entry
- Authory records by upload and authority record number entry
Signed-off-by: Philip Orr <philip.orr@lmscloud.de>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the batch record modification and batch record
deletion templates to replace tab markup with the use of WRAPPERs.
This patch adds a "clearfix" snippet of CSS to _mixins.scss copied from
Bootstrap. Applied to the active tab pane, this helps in situations
where Bootstrap tabs follow a floated element.
The patch also wraps tab label strings in <span> to ensure they can be
translated.
Unrelated: The patch removes an extra </option> from the batch record
modification template.
To test you should have at least one list and at least one MARC
modification template defined.
- Apply the patch and go to Cataloging -> Batch record modification
- You should see three tabs, "Upload a file," "Select a list of
records," and "Enter a list of record numbers."
- The tabs should look correct and work correctly.
- Checking the "Authorities" radio button should hide the lists tab.
- Test that submissions from each form work correctly.
- Go to Cataloging -> Batch record deletion and perform the same tests.
Signed-off-by: Philip Orr <philip.orr@lmscloud.de>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The page seems to work fine without these changes but the QA test script
is happier with "USE raw" and html_helpers.inc added.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the authorized values and item types administration
templates so that they use the new WRAPPER directive to build tabbed
navigation.
Seeing that the markup in itemtypes.tt and authorised_values.tt is
indential when it comes to icon selection, I have moved that section of
the template into an include file and updated both templates to use it.
The patch also makes minor SCSS changes, so to test you must rebuild the
staff interface CSS.
To test, apply the patch and go to Administration -> Item types.
- Edit an item type.
- On the edit page you should see tabs under "Choose an icon."
- Confirm that the tabs look correct and work correctly.
- If you did not previously have any icon selected, the "None" tab
should be active.
- If you had an icon selected, that icon set's tab should be active.
- Confirm that if you specify a remote image
(e.g.https://via.placeholder.com/50/FF0000/FFFFFF.png) the tab is
correctly shown after you save and re-edit.
- Confirm that changing icons works correctly and that the selected
icon's tab is always active when you return to the edit view.
Perform the same tests in Administration -> Authorized values.
Signed-off-by: Andrew Auld <andrew.auld@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This enhancement adds a system preference StripWhitespaceChars which,
when enabled, will strip leading and trailing whitespace characters from
all fields when cataloguing both bibliographic records and authority
records. Whitespace characters that will be stripped are:
- spaces
- newlines
- carriage returns
- tabs
To test:
1. Apply patch and install database updates
2. Go to Administration, system preferences, find the new
StripWhitespaceChars preference. It should be "Don't strip" by default.
Change it to "Strip".
3. Search for a biblio record and edit it. Put some leading or trailing
whitespace characters in input fields and textarea fields and save.
4. Confirm these characters are removed when you save the record.
5. Repeat steps 3 and 4 for authority records.
6. Confirm tests pass t/db_dependent/Biblio/ModBiblioMarc.t
Sponsored-by: Educational Services Australia SCIS
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 30358: (follow-up) Also strip inner newlines
This patch amends the StripWhitespaceChars system preference to also
strip inner newlines (line breaks and carriage returns) when enabled.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 30358: (follow-up) Inner newlines should be replaced with a space
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 30358: (follow-up) Fixing tests and including for inner newlines
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 30358: (follow-up) Clarify syspref wording about fields affected
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 30358: (follow-up) Consider field has multiple subfields of same key
To test:
1) Click the clone subfield button to make multiple subfields with the
same key, i.e. 500$a$a$a
2) Save the record and confirm that the fields contain the correct data
after whitespaces are stripped.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 30358: (follow-up) Put multiple subfields fix on auth side
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 30358: (follow-up) stripWhitespaceChars subroutine and tests
To test:
Confirm test plan above still works as expected and tests pass in
t/Koha_MetadataRecord.t
Sponsored-by: Catalyst IT
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 30358: (follow-up) Fixing ModBiblioMarc.t tests
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 30358: (follow-up) Do not strip whitespace from control fields
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 30358: (follow-up) Simplify regex
The regex does the following:
1. Replace newlines and carriage returns with a space
2. Replace leading and trailing whitespace with nothing (strip)
Signed-off-by: Hammat Wele <hammat.wele@inlibro.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
With biblio level itemtypes you won't have any on the
item type level, so I feel like it will make sense
to hide the column here like we do in other spots.
To test:
* pref at specific item = itemtype column shows
* pref at biblio level = no itemtype column
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Go to MARC bibliographic framework, pick a framework and go to 952, subfield "o". Turn the cn_browser plugin on.
2. Pick or create an item in that framework, edit that item.
3. TO the right of the 952$o notice the "...". Click that start the call number browser.
4. Notice there is no column for item type.
5. Apply patch, restart_all
6. Notice there is now a column for item type.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Add 'search history' button to advanced search button groups if 'EnableSearchHistory' sys pref is set to 'keep' via added code block to advsearch.tt
To test:
1) Login to Koha dev box instance
2) Select 'Advanced search module' '/cgi-bin/koha/catalogue/search.pl' 'Search history' icon will not be visible in tools groups in form.
3) Select 'koha administration' module '/cgi-bin/koha/admin/admin-home.pl'
4) Enter 'EnableSearchHistory' string into top search field
5) Change ' EnableSearchHistory' value to 'keep'
6) Press 'Save all Searching preferences' to save pref changes
7) Navigate back to Koha landing home '/cgi-bin/koha/mainpage.pl'
8) Select 'Advanced search module' '/cgi-bin/koha/catalogue/search.pl'
9) 'Search history' icon will now be visible in tools groups in form
10) SIGN OFF
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the code to use KohaTables to provide export of the
batch modification results.
Additionally, searching is added, and the first two columns are made
searchable
To test:
1 - Perform a match item modification on several items
2 - View the results of the background job
3 - Apply patch
4 - Reload page
5 - Note you now have additional controls including 'search' and
'export'
6 - Test searching and exporting
7 - Confirm all work as expected
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The MARC field needs to be added with a $ between field and subfield
for things to work right. So this adds a hint about the expected format.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The navigation on the left in the acq module has links to
the additional fields for baskets and invoices. This also
adds a link for the new order lines feature.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This is about the note displaying after an additional field
that is linked to a MARC field.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
MARC subfields can be linked to "authorised values" that are not real
authorised values: itemtypes, branches, and cn_source.
Those were not taken into account. This patch fixes that
Test plan:
1. Create additional fields for order lines with a MARC subfield that is
linked to one of those "fake" authorised values list
2. Follow the same steps as in the main test plan
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch allows to create additional fields for order lines.
Once created, these fields can be filled during order line creation or
modification.
If additional field is linked to a MARC field, there are two possible
scenario:
- MARC field mode = get: The field cannot be modified and its value is
retrieved from the bibliographic record (current behaviour)
- MARC field mode = set: The field can be modified and its value is
saved to the bibliographic record (new behaviour)
If additional field is linked to an authorised value category, then
authorised values are used. If not directly linked to an authorised
value category, but linked to a MARC field, a search for an AV category
is made on MARC default framework.
This patch doesn't display additional fields value anywhere (except in
order line creation/modification). Future patches will do that.
Test plan:
1/ Go to Acquisitions home
2/ In the left menu, click on "Add order line fields"
3/ Click on "New field" button
4/ Give the field a name (unique), no AV category and no MARC field.
5/ Save.
6/ Create 5 other fields:
a/ no AV category, a MARC field not linked to AV category, MARC field
mode = get
b/ no AV category, a MARC field not linked to AV category, MARC field
mode = set
c/ no AV category, a MARC field linked to AV category, MARC field
mode = get
d/ no AV category, a MARC field linked to AV category, MARC field
mode = set
e/ an AV category, no MARC field
7/ Create everything you need to be able to create order lines
(supplier, basket, ...)
8/ Create an order line. At bottom of the page, you should see your
additional fields, with authorised values dropdrown list for fields
(c), (d) and (e). Fields (a) and (c) should be disabled.
9/ Fill these fields with some data and save order line
10/ check that data was correctly saved into biblio for fields (b) and
(d), but not for (a) and (c)
11/ modify the same order line, check that values you've filled are
correctly retrieved and that values for (a) and (c) were correctly
retrieved from the bibliographic record
12/ modify all values, save, and check biblio once again
Signed-off-by: Harold Dramer <harold.dramer@nyls.edu>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes minor adjustments to the global and staff home page CSS
so that the display of news and quote-of-the-day are more consistent.
To test, apply the patch and rebuild the staff interface CSS.
- If necessary, add at least one news item (Tools -> News -> New entry)
and at least one quote (Tools -> Quote editor -> New quote).
- View the staff interface home page to confirm that the style of the
news area and the quotes is consistent.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The 'configure' button is displayed for any tables, even those that
cannot be configured.
This is a regression caused by
commit 765fd1ced3
Bug 33066: Introduce a KohaTable Vue component
It's adding a default value for table_settings, but then later we are
testing if table_settings is true:
699 let table_settings = params.table_settings || {};
...
798 if ( table_settings && CAN_user_parameters_manage_column_config ) {
This patch is reverting the default value, so the test will be
corrected.
Test plan:
1. Go to Tools > Quote editor
2. Click "Configure"
=> Without this patch you are brought to the column settings page, but the quote editor table is not there
=> With this patch the button is not present
3. Go to the cities page (admin/cities.pl)
4. Click "Configure"
=> You are brought to the column settings page
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Test plan:
= Koha =
Apply the first patch, prove xt/vue_tidy.t and notice the failure
Apply this patch, now it passes
= QA test =
Apply the change to the merge request linked with this qa-test-tools' issue:
https://gitlab.com/koha-community/qa-test-tools/-/issues/62
inside your ktd container (at /kohadevbox/qa-test-tools/)
Edit a .js within koha-tmpl/intranet-tmpl/prog/js/vue and a .ts file
(cypress test) with something not pretty
Commit and run the QA script
=> It's failing!
Pretty the change, commit again, run the QA script
=> It's happy!
= KTD - git hook =
Go to the merge request linked with this ktd's issue:
https://gitlab.com/koha-community/koha-testing-docker/-/issues/374
Copy the modified git hook to .git/hooks/ktd/pre-commit
Edit a .js within koha-tmpl/intranet-tmpl/prog/js/vue and a .ts file
(cypress test) with something not pretty
Commit
=> Notice that the commit content is pretty!
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
With this patch the new status Circulating, Out for binding and
Bound can be set for any issue, if the current status is not "Expected".
This is to keep the list a little shorter when the issue hasn't even
arrived in the library yet.
These new status will be especially helpful if the library has
opted to not create items for all their subscriptions as a lot
of libraries will only lend bound volumes, but not the singular
issues.
* Circulating: this will be useful if the library is using
routing lists and the items are not available at the library
for a longer time.
* Out for binding: if you send out issues for binding this will
help to track these.
* Bound: this will help users to know that the issue is now
available as a bound volume.
To test:
* If you haven't yet:
* Create a subscription
* From the serial collection page:
* Receive or create several issues and set different status
* Make sure you have at least 2 late and claim one of them
* Make sure you have several Arrived issues
* Edit Arrived serial issues and others
* Verify that the status pull down no also shows the new status
if the issue has a different status than "Expected"
* Set the new status
* Verify they save and show correctly
* Edit again and verify the pull downs are pre-set correctly
to the saved status
* Verify they show everywhere else (see previous test plans :) )
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test with the next patch that allows to set the new status.
Sponsored-by: The Research University in the Helmholtz Association (KIT)
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This moves the identical code used to display the serial status
from the different templates into one common include.
To test:
* Add a subscription
* Receive several issues, make sure 2 are late
* Claim one of the late issues
* Verify the status displays nicely on these pages:
* Subscription detail page > issues tab
* Catalog detail page > subscription tab
* Serial claims page
* Serial collection page of your subscription
Note: there was some code for the subscription detail page
that should have displayed the claim date, but didn't work.
To keep things simpler and identical to before, I have left
that bit out for now.
Sponsored-by: The Research University in the Helmholtz Association (KIT)
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This adds another list item to match the preference description
for the results page:
* Empty. No XSLT will be applied (default)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Atomic updated fixed : intranet => OPAC
Changed to be more like the one adding AuthorityXSLTOpacResultsDisplay
New preference moved to opac.pref
Signed-off-by: Thibault <thibault.keromnes@univ-paris8.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Thibault <thibault.keromnes@univ-paris8.fr>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a syspref that allow to customize the authority detail
view in OPAC with XSLT.
Test plan:
1. Make sure to have at least one or more authorities
2. OPAC: Home > Authority search(Submit) > Authority search results
3. Click details on a result and notice the view
4. Apply patch
5. INTRA: Home > Administration > System preferences ->find
"AuthorityXSLTOpacDetailsDisplay"
6. Write the path where your file is. You can try with the XSLT for
biblio for instance:
.../koha/koha-tmpl/opac-tmpl/bootstrap/en/xslt/UNIMARCslim2OPACDetail.xsl
7. Save changes
8. Repeat 2-3 and notice the display
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Thibault <thibault.keromnes@univ-paris8.fr>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the ability to send selected patrons for batch
modification. It does this by adding a hidden form which is populated
from the borrowernumbers stored in the browser's localStorage when
selections are made.
To test, apply the patch and perform a patron search in the staff client
which will return multiple pages of results.
- Select a patron on the first page of results.
- The "Add to patron list" and "Batch patron modification" buttons
should become active, and the "Patrons selected" box should show "1"
- After checking another checkbox the "Merge selected patrons" button
should activate and the "selected" count should increment.
- Test making selections on other pages of results. The "selected" count
should continue to increment.
- Test the "Batch patron modification" button, confirming that all the
patrons you selected are correctly passed to the batch patron
modification tool.
- Test that the "Clear" control works correctly to clear all checkboxes
and disable all other buttons.
- Test that the "Select all" and "Clear all" controls work correctly,
enabling all buttons and correctly incrementing the "selected" count.
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The 'Allow changes to contents from' dropdown when creating/edit lists
should be most locked down to least locked down:
1. Nobody
2. Owner only
3. Permitted staff only
4. Staff only
5. Anyone seeing this list
Sponsored-by: Catalyst IT, New Zealand
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Sponsored-by: Catalyst IT, New Zealand
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the classes to the template files so that the plugin hook can identify that cover images are required and where to inject them
Test plan as per first commit
Sponsored-by: PTFS Europe
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Go go the plugin admin page
upload a plugin
Notice that the "Actions" column is not longuer sortable
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch implements the code to allow a patron to receive multiple
orders at the same time in /cgi-bin/koha/acqui/orderreceive.pl page
To test:
1. apply all patches
2. updatedatabase
3. Go to system preferences and allow AcqReceiveMultipleOrderLines
4. In acquisitions module, create a vendor if you don't have one and add
3 baskets.. one with create items on ordering, one with create items
on receiving and finally one with create items when cataloguing
5. Fill baskets with orders (There should be at least 15 orders in total). There should be a mix of orders created by suggestions, others by subscriptions and others by neither of those methods.
6. Close all baskets and receive shipment.
CHECK => in /cgi-bin/koha/acqui/parcel.pl page, in top table there is a column with checkboxes, and a button that says "Receive selected"
7. If all orders from all baskets are shown in the table, set the rows per page to 10, so table has more than one page
8. Check some of the checkboxes
CHECK => "Receive selected" button shows how many rows are selected
9. Go to the next page and select some more rows
CHECK => Changing page does not modify how many rows where selected
10. Go back to previous page
CHECK => Previously selected rows are still selected
11. Reload the page to deselect all rows
12. Select only one row and click on "Receive selected" button
CHECK => the page /cgi-bin/koha/acqui/orderreceive.pl behaves just the same as if the "receive" link in the selected row would have been clicked.
13. Click on cancel to go back to parcel.pl page
14. Select all rows (even the ones from the next page of the table) and
click on "Receive selected"
CHECH => In orderreceive.pl page there is a table with all selected rows
15. Ensure table has more than one page, as in step 7
16. Click on the "edit" link in the last row of the current page
CHECK => A modal window is displayed with 4 tabs within: Info,
Accounting, Receipt history and Items
CHECK => Modal has 4 buttons at the bottom, 'Previous' to go to previos
order, 'Cancel' to close the modal without keeping modifications, 'Save'
to close modal keeping modifications and 'Next' to go to the next order
CHECK => Even that we are at the end of the current page, 'Next' button
is still available
17. Click on 'Next' button
CHECK => The table behind the modal now displays the next page, and the modal was not closed
18. Click on 'Previous'
CHECK => The table behind the modal went back to the first page, and the modal was not closed
19. Click on 'Previous' button till you reach the first row of the first
page
CHECK => Only when you reach the first row of the first page 'Previous'
button gets disabled
20. Click on 'Next' button till you reach the last row of the last page
CHECK => Only when you reach the last button of the last page 'Next'
button gets disabled
21. Check that behaviour for the different types of order are still the
same
a. For orders that where created through suggestion, check that the
suggestion info is present in Info tab. If when suggestion was accepted
you set a reason, a dropdown to change the reason shoul display also.
b. For orders that where created through subscriptions, check that
the Items tab is disabled, and the Receipt history is enabled. On
accounting tab you should be able to change quantity ordered. If there
were less items received than ordered, the next time you receive this
order the child order generated from this one shoul appear in receipt
history.
c. For orders that don't come from subscription and creates there items on ordering, Receipt history
should be disabled, and a table with prefilled items shold appear in the
Items tab. You can edit them and the changes should appear in the item's
row.
d. For orders that don't come from subscription and creates there
items on receiving, Receipt history should be disabled, and a form to
create the items should appear in Items tab. When you add an item a
table should appear.
e. For orders that don't come from subscription and creates there
ites on cataloguing, Receipt history and Items tabs should be disabled.
f. Any changes made in quantity (received or ordered) or funds in the modal should be
reflected in the table if you click save from the modal.
22. Once you've done all you checking and verifications click save
23. While saving a progress bar should appear
24. If no error was detected, you should be redirected back to parcel.pl
page
25. If an error or warning was detected (like there is an order with 0
items to receive) the save button should be disabled and warnings
are dispayed.
26. prove t/db_dependent/Koha/Acquisition/Fund.t t/db_dependent/Koha/Acquisitoin/Order.t t/db_dependent/Koha/Item.t
Sponsored-by: Virginia Polytechnic Institute and State University
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We removed the 'scoped' attribute and so the style rules added in the
previous patch were applied to the agreement list view.
Why is 'scoped' not working is the main question here (?) but adding a
more specific selector to aim only the component (AgreementsList) from
the modal is a quick solution.
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Bug 33491: Add a more specific class for the modal
We don't want to apply these CSS rules to other modals
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Just send the codes and descriptions only to client.
Adding a few comments to the reduce construction.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The "MARC overlay rules" page doesn't display or work correctly
if a patron category code contains a "-".
This happens because of the JavaScript function in
"marc-overlay-rules.tt" line 469. This causes an error
"Uncaught SyntaxError: missing : after property id".
Test plan:
1. Go to Administration > Patron categories.
2. Make sure you don't have a patron category code that contains
a "-".
3. Go to Administration > Record overlay rules.
4. The table should display correctly, and you can add, edit
and delete rules.
5. Return to Patron categories.
6. Add a new patron category with a "-" in the patron category code.
7. Return to Record overlay rules page:
=> The page doesn't display and load correctly (see the attached
image) - the normal DataTables header and footer aren't
displayed, and you can't add, edit or delete overlay rules.
=> If you turn on web developer tools, an error is displayed in the
console: "Uncaught SyntaxError: missing : after property id".
8. Apply the patch.
9. Repeat the step 7, the Record overlay rules page should now
display correctly and you should be able to add, edit and
delete rules.
10. Sign off.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1) Run the following test and make sure all pass:
t/db_dependent/api/v1/biblios.t
t/db_dependent/api/v1/checkouts.t
t/db_dependent/api/v1/return_claims.t
t/db_dependent/Circulation/CalcDateDue.t
t/db_dependent/Circulation/CheckIfIssuedToPatron.t
t/db_dependent/Circulation/dateexpiry.t
t/db_dependent/Circulation/GetPendingOnSiteCheckouts.t
t/db_dependent/Circulation/GetTopIssues.t
t/db_dependent/Circulation_holdsqueue.t
t/db_dependent/Circulation/IsItemIssued.t
t/db_dependent/Circulation/issue.t
t/db_dependent/Circulation/MarkIssueReturned.t
t/db_dependent/Circulation/maxsuspensiondays.t
t/db_dependent/Circulation/ReturnClaims.t
t/db_dependent/Circulation/Returns.t
t/db_dependent/Circulation/SwitchOnSiteCheckouts.t
t/db_dependent/Circulation.t
t/db_dependent/Circulation/TooMany.t
t/db_dependent/Circulation/transferbook.t
t/db_dependent/DecreaseLoanHighHolds.t
t/db_dependent/Holds/DisallowHoldIfItemsAvailable.t
t/db_dependent/HoldsQueue.t
t/db_dependent/Holds/RevertWaitingStatus.t
t/db_dependent/Illrequests.t
t/db_dependent/ILSDI_Services.t
t/db_dependent/Items.t
t/db_dependent/Koha/Account/Line.t
t/db_dependent/Koha/Acquisition/Order.t
t/db_dependent/Koha/Biblio.t
t/db_dependent/Koha/Holds.t
t/db_dependent/Koha/Items.t
t/db_dependent/Koha/Item.t
t/db_dependent/Koha/Object.t
t/db_dependent/Koha/Patrons.t
t/db_dependent/Koha/Plugins/Circulation_hooks.t
t/db_dependent/Koha/Pseudonymization.t
t/db_dependent/Koha/Recalls.t
t/db_dependent/Koha/Recall.t
t/db_dependent/Koha/Template/Plugin/CirculationRules.t
t/db_dependent/Letters/TemplateToolkit.t
t/db_dependent/Members/GetAllIssues.t
t/db_dependent/Members/IssueSlip.t
t/db_dependent/Patron/Borrower_Discharge.t
t/db_dependent/Patron/Borrower_PrevCheckout.t
t/db_dependent/Reserves/GetReserveFee.t
t/db_dependent/Reserves.t
t/db_dependent/rollingloans.t
t/db_dependent/selenium/regressions.t
t/db_dependent/SIP/ILS.t
t/db_dependent/Holds.t
t/db_dependent/Holds/LocalHoldsPriority.t
t/db_dependent/Holds/HoldFulfillmentPolicy.t
t/db_dependent/Holds/HoldItemtypeLimit.t
t/db_dependent/Circulation/transferbook.t
2) Performe one or more checkouts for a patron, making sure
that the circulation rules allows for renewals (for example by
setting an earlier due-date).
3) Log in as this patron in OPAC and make sure the list of
checkouts is displayed correctly, and that renewing an issue
still works.
Sponsored-by: Gothenburg University Library
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This is Julian's patch with some extra cleanup to reduce repeated code
If AllowHoldPolicyOverride is enabled and only some pickup locations are
available, you still have the possibility to force one of the others
pickup locations.
But when there are zero pickup locations available, that is not
possible.
This patch change that by always displaying the list of pickup locations
when AllowHoldPolicyOverride is enabled.
Test plan:
1. Apply patch
2. Disable AllowHoldPolicyOverride
3. Create a biblio B with an item I at library A.
4. Configure this library A to not be a pickup location
5. Add a "Default holds policy by item type" for item I type where "Hold
pickup library match" is "item's home library"
6. Try to place a hold on biblio B
You should not be able to place a hold because there is no valid
pickup locations
7. Enable AllowHoldPolicyOverride
8. Try to place a hold on biblio B
You should now see all valid pickup locations in a dropdown list
(with an exclamation mark in front of each option) with none selected
by default
9. Verify you can place a title-level hold and an item-level hold
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Right now the holds queue builder starts filling bib-level holds with
items whose patron's home library matches the item's home library.
It would be good and reasonable to have the option to prioritize
item's whose patron's home library matches the item's holding library
to minimize transfers.
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test Plan:
1) Find record with at least 3 holds.
2) Change first holds priority as 2, Priority is changed to 3.
3) Try to change priority back to 1, Priority is changed to 2.
4) Apply this patch
5) Reload the page
2) Change first holds priority as 2, Priority is changed to 2.
3) Try to change priority back to 1, Priority is changed to 1.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi>
Signed-off-by: Hinemoea Viault <hinemoea.viault@inlibro.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
* Go to the OPAC, log into your account
* Make changes to your personal details and save
* Go to the staff interface and use the link on the start page to
moderate the change request
* At the top of the list you'll see something like:
Without this patch:
Ignore|Patron details
With this patch:
Ignore | Patron details
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We just figured out that multi-line TT comments show up
weirdly in translations and fixed it on bug 33332. So
this just follows the newly established pattern.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch begins reduing some of the extra things we are doing in
detail.pl that could easily be handled in the templates - fetching
authorised values and branches etc
It also removes a loop to find items that should be hidden, and instead
uses a searh parameter
The template changes either use item object rather than passed
variables, or utilize plugins to fetch authorised valued
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The previous syntax causes a warning during the execution of the translation script
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
examples: 'crayon'->'carchoal' or 'camaiu'->'cameo'
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch corrects the typo "presedence" with "precedence."
The patch also corrects some grammar:
"so if the 'library.com' domain will take presedence over
'*library.com'"
...changed to...
"so 'library.com' domain will take presedence over '*library.com'"
I also changed the <div>s inside that block of help text to <p> in order
to improve legibility.
To test, apply the patch and go to Administration -> Identity providers
-> Manage domains (on an existing provider) -> Edit, and click the
"More" button under the "Domain" field.
Confirm that the text is correct.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It should ease translatability and remove an extra space.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It seems the form didn't populate all fields form data passed in. This patch
corrects that
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We didn't include anything except the authid id in the try again form, this
patch extends to cover all the fields
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds an id to z39.50 search interface submit buttons so that
the JavaScript event for changing the cursor can be linked to that
instead of the obsolete class.
The patch also adds code copied from Bug 33233 in order to make the
"waiting" cursor revert to the default if the user uses the back button
to return to the search form.
To test, apply the patch and go to Cataloging -> New from Z39.50
- Fill in a search term and click the submit button
- Your cursor should change to a "waiting" cursor while the search is
performed, before you're redirected to the results.
- From the results page, clicking the back button (or right-clicking the
page and choosing "Back") should return you to the search form and
your cursor should be a standard pointer.
Perform the same test from:
- Acquisitions -> Vendor -> Basket -> Add to basket -> From an external
source
- Authorities -> New from Z39.50/SRU
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Disable UseControlNumber
Change biblio title to something like:
Hamlet or CHINESE_CHARS
where you add some nice Chinese chars.
Create a 765 looking for that title in another biblio record.
Without this patch, the link at detail page finds both records,
since it looks for ti-phr:Hamlet OR the Chinese chars.
With this patch, the link at detail uses quotes and finds only
one, since the OR is now part of the ti-phr search.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
** For OPAC
[1] Pick a biblio record A as original entry, fill $001/$003.
[2] Pick another biblio record B as translation, add 765 with $t,
$a and $d. Put (orgcode)cnum from A into $w.
[3] Disable UseControlNumber.
[4] Goto OPAC detail page of B. Check link; should be title based.
[5] Enable UseControlNumber.
[6] Goto OPAC detail page of B. Check link; should incl orgcode and cnum.
[7] Edit B. Replace $w with cnum of A only.
[8] Goto OPAC detail page of B. Check link; should incl cnum only.
** For staff client
[9] Goto staff detail page of B. Check link again.
[10] Edit B. Set 765 ind2 to 8, fill $i.
[11] Goto staff detail page of B. You should see different label.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Note for QA: Opened bug 33515 to see if we can use this same
function in a few other places too. Would probably reduce code
and increase consistency.
Test plan:
See next patch.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Date fields in BorrowerMandatoryField are not required by the validation
form when a new patron is added or modified.
This is because the 'required' prop does not exist on the input element
when the flatpickr instance is created.
We should either add it in the DOM directly (tt), but it will require to
do it "manually" for each date fields, or add it when we add it to the
inputs. This patch implements the second option.
Test plan:
1. Add "dateofbirth" to syspref BorrowerMandatoryField.
2. Add patron and leave date of birth input field empty.
3. Save.
=> Form is not submitted and you are asked to fill in a date of birth
Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
https://bugs.koha-community.org/show_bug.cgi?id=33648
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 30280 added the ability to use multiple thesauri for authorities in Koha.
This is a large change, and many libraries use authorities in a ess strict manner.
This patch simply adds a preference, disabled by default, to enable this new feature
To test:
1 - Find or create a record with a 650 heading, second indicator 0 (LOC)
2 - Ensure this links to an authority in your system
3 - Disable AutoCreateAuthorities, enable CatalogModuleRelink
4 - Edit the heading to second indicator 2
5 - Save, the heading does not link
6 - Apply patch, updatedatabase, restart all
7 - Edit and save record again
8 - Heading should now link to the LOC authority, despite different second indicator value for source
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a licenses option to the top searchbar
Test plan:
1) Apply patch
2) run yarn build
3) Navigate to the ERM module
4) Observe that the top search bar should have an option for licenses
5) Click on licenses in the left hand menu, the search bar should update to show licenses as the active search option
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1. Enable system preference ExportCircHistory
2. Create an item bundle (see bug 28854 comment 458)
3. Check out the item bundle
4. In the checkouts table, check the box in column "Export",
choose export format 'MARC with items', check "Export items bundle
contents" and click on "Export" button
The exported file should contain the biblio and item created at step
2, but also the biblio and items that are part of the bundle
Signed-off-by: Marie-Luce <marie-luce.laflamme@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marie-Luce <marie-luce.laflamme@inlibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
https://bugs.koha-community.org/show_bug.cgi?id=25508
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This adds the missing debit and credit types to the includes, namely:
DISCOUNT, PURCHASE, PAYOUT, and VOID.
I sorted them as they appear in the GUI (alphabetically) so it's a little
easier to spot missing ones.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the credit and debit types management pages to use
the proper includes for handling system type translations. This is how
it should have been done in the first place on the original bugs that
introduced the management of these types but for some reason I think it
got dropped during the QA process leading to confusion around these
system types with their fixed descriptions.
To test:
1. Apply patch
2. Apply the translations
./misc/translator/translate install xx-XX
3. In the staff interface, go to Administration > Credit types
--> They should be translated
4. Go to Administration > Debit types
--> They should be translated
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This is following recommendations from accessibility
guidelines. It being a link or button already indicates
that you need to click it. We don't need to spell it out.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Create a subscription
2. Make sure that you choose "Create an item record" when receiving the serial and associate it with a record.
3. Fill out the numbering pattern stuff and save the subscription.
4. Receive and change the status to arrived. Doing so will make the item subfields appear for editing.
5. Add some stuff, like a barcode, and Save.
6. Now, if you have made a mistake, you may want to edit the serial/item. Check the edit box and click 'Edit serials '
7. For your issue that has already arrived click 'Click to add item'. The item record from before appears.
8. Apply patch.
9. Try 6 & 7 again. The existing items should now read 'Click to edit item'
Signed-off-by: Andrew Auld <andrew.auld@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This updates the other occurrences and adds html_line_break to all
except the edit page - it seems html or raw doesn't affect the value of the textarea,
but moved to raw for consistency
To test:
1 - Add an HTML note to a patron, make sure to add a line break:
<h1>Testing</h1>
<h2>Newline</h2>
2 - Checkout to patron and return
3 - Confirm note shows correctly
4 - Add patron to a list
5 - Confirm note displays correctly
6 - Edit patron, confirm note field is correct
7 - Batch modify borrower
8 - Confirm note displays correctly in batch list
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This is a consistency patch: we already allow adding HTML tags
to the patron circulation note and the contents display
correctly in the patron account and in the patron search results
in the staff interface. But the HTML tags are printed on the
checkins page.
To test:
* Add a circulation note including HTML tags to a patron
Example: <h1>This patron is great!</h1>
* Check an item out to this patron
* Verify that the note displays formatted in patron search results
* Verify that the note displays formatted in the patron record
* Return the item
* Verify the note shows the printed tags
* Apply patch
* Check item out again and check it in again
* Verify the note now displays correctly in list of checkins
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The form for entering your authentication code shoudl not suggest
previous codes.
To test:
* Activate TwoFactorAuthentication
* Go to your patron account in staff
* More > Manage 2-factor authentication
* I used "Google authenticator" on my phone, so:
* Open app on your phone, add new and scan the QR code
* Enter activation code
* Log out of staff interface
* Log back in, you are now also asked for an authentication code
as second step
* Look up code in app, enter, get logged in
* Log out, log back in - the form now suggests the previous code
when you click on it
* Apply patch
* Reload things (restart_all on ktd)
* Verify that you no longer get the suggestion
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Patch 32555 tries to resolve the issue caused by bug 31313. But the way it is fixed seems to be
at least problematic. With patch 32555 we will never see the difference between
`serial`.`serialseq` and `items`.`enumchron` which is still intended in opac-detail.tt
(line ~ 1332) and [intranet] catalogue/detail.tt (line ~ 446). This is because
ITEM_RESULT.serialitem (in opac-detail.tt) and item.itemserial.serial (in catalogue/detail.tt)
refer to non-existing things. (and therefor the problem described in 32555 no longer emerge).
The original problem is caused by mixing up serialitem with serial in [opac-]detail.pl
and passing serialitem instead of serial to both templates.
To test:
1. Create a serial subscription
1.1. Go to Serials
1.2. Click on New subscription
1.3. Fill out the first form
- Vendor: leave empty
- Record: enter a record number
- Create an item record when receiving this serial
- When there is an irregular issue: Keep issue number
- Manual history: leave unchecked
- Call number: leave empty
- Library: Centerville
- Public/nonpublic note: leave empty
- Patron notification: None
- Location: None
- Collection: None
- Item type: Continuing resources
- Grace period: leave empty
- Number of issues to display: leave both empty
1.4. Click Next (and confirm you are not using a vendor)
1.5. Fill out the second form
- First issue publication date: 2023-01-01
- Frequency: 1/month
- Subscription length: issues 12
- Subscription start date: 2023-01-01
- Subscription end date: 2024-01-01
- Numbering pattern: Number
- Locale: leave empty
- Begins with: 42
- Inner counter: leave empty
1.6. Click Test prediction pattern
1.7. Click Save subscription
2. Click OPAC view: Open in new window.
3. Back in the staff interface tab, receive an issue
3.1. Click Receive
3.2. In Status, choose Arrived for No. 42
3.3. IN ITEM DETAILS BELOW CHANGE h - Serial enumeration / chronology
from No. 42 to some different string
3.3. Click Save
4. Check the items in OPAC and Intranet – you will see only the value from the
item $h subfield (enumchron) instead of desired "enumchron -- serialseq"
in case of a difference between `serial`.`serialseq` and `items`.`enumchron`.
5. Apply this patch
6. Repeat 4
7. Check the items in OPAC and Intranet – you should now see the desired
"enumchron -- serialseq" string.
8. Sign off
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Nick <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
Create some checkouts in future and past, make sure to include
some with a time != 23:59.CirculateILL
Verify that the due date is displayed correctly on:
* Catalog detail page > Items tab > Checkout status
* Circulation start page > Renew > Renew one of your checkouts > dialog message
* ILL request page: requires ILL setup and CirculateILL system preference
* Patron acccount in staff > Print > Print summary
* Catalog detail page > Holds > search for patron > due date on checked out items
* Recalls:
* Activate UseRecalls system preference, set up circulation rules to allow recalls
* Checkout an item to another user
* In the OPAC, place a recall on that record with yor use
* Check "Recall a specific item"
* Verify due date in item list
* Place recall on checked out item
* Patron account in OPAC > Recalls history (due date might have been changed through recall)
* OPAC patron account > Summary > Overdue tab
* Self checkout:
* Activate WebBasedSelfCheck
* Go to <opacbaseurl>/cgi-bin/koha/sco/sco-main.pl
* Log in > Tab checkouts
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
JD amended patch - removed 'fda'
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Make some daily an hourly checkouts and confirm the right display
(hourly with hours and minutes, daily only date) of due date on these
places:
1) catalogue -> checkout history
2) circulation -> overdues with fines
3) <already fixed>
4) circulation -> pending on site checkouts
5) patrons circulation history
6) opac -> account summary -> relatives checkouts
Note: I suspect the moremember-receipt.tt template is not used anymore
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes a conflict between the template-generated markup and
Bootstrap JS which were both competing to show the correct default tab.
It's simpler to rely on JavaScript.
To test, apply the patch and enable the TranslateNotices system
preference if necessary.
- Go to Tools -> Notices & slips
- Go to edit any notice e.g. DUEDGST
- The page should load with the "Default" tab selected by default.
- Enter unique titles and contents under each tab to confirm that the
data you see under the "Default" or "English (en)" tab is being shown
in the right place.
- Save your modified notice and edit it again to confirm that the tabs
correspond correctly to your data.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When ordering catalog search by relevance from advanced search, this is not visible in sort order combobox in staff interface.
This is because sort by relevance is a special case not using sort
order.
This patch add a new method C4::Context->default_catalog_sort_by to use
in both staff interface and OPAC.
Test plan :
1.0) On staff interface
1.1) Define system preferences defaultSortField = 'relevance' and defaultSortOrder = 'descending'
1.2) Perform a catalog search from main page on any term, ie 'perl'
=> You see in sort combobox 'relevance' selected (with a check icon)
1.3) Perform an advanced search on any term, ie 'perl', with sort by relevance
=> Without patch : you see in sort combobox 'relevance' not selected (no check icon)
=> With patch : you see in sort combobox 'relevance' selected (with a check icon)
2.0) On OPAC
2.1) Define system preferences OPACdefaultSortField = 'relevance' and OPACdefaultSortOrder = 'descending'
2.2) Perform a catalog search from main page on any term, ie 'perl'
=> You see in sort combobox 'relevance' selected
3.0) Run prove t/Context.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Have an item with a replacement cost checked out to a patron
2. Set the ClaimReturnedChargeFee sys pref to "Ask if a lost fee should be charged"
3. Make a claim and check the box for charging.
4. Claim happens but no charge occurs.
5. Apply patch and try again.
6. A charge should now occur.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Hinemoea Viault <hinemoea.viault@inlibro.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When merging bib records the first tab (the source record) should have
all the checkboxes checked by default.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 32368 added whitespaces, remove them.
To test:
1 - Create a report like:
SELECT biblionumber FROM biblio
2 - Run it
3 - Try the various options from the 'Batch operations' button
4 - The operations don't find the biblios
5 - Create a report like:
SELECT cardnumber FROM borrowers
6 - Run it
7 - Test the batch operations
8 - They fail
9 - Apply patch
10 - Run each report again and test batch operations
11 - They work!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
