This patch makes the notice "ACCTDETAILS" translatable.
Test plan:
1. Switch on TranslateNotices and AutoEmailOpacUser
2. Define templates for different languages for ACCTDETAILS
3. Create a new patron, define an email address, userid and password.
Also pick a different "preferred language" then the default value
4. You should receive the email with the correct, translated, email.
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Make sure WhenLostChargeReplacementFee is set to charge
2 - Find an item with a replacement cost (or default) and a call number
3 - Checkout the item to a patron
4 - Mark the item lost
5 - View the fine - the description includes title and barcode
6 - Apply patch
7 - Check the item in
8 - Check it out again
9 - Mark it lost
10 - Note the fine includes the callnumber
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
At refactoring time the unac_string call was moved to Koha::Patron.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch changes the behaviour in the _FixAccountForLostAndFound
method.
The method will now add the amountoutstanding value for the lost item
fee to the CR credit to be generated. This means that:
- If there's some remaining debt, the same amount will be added to the
CR credit and used to cancel that debt. The final amountoutstanding
will be the same as before, but an offset will be generated as
required.
- If the line was written off, the behaviour remains unchanged, so no
offset.
- If the line was payed and/or written off in full only the payments are
refund, preserving the current behaviour.
To test:
- Apply the regression tests patch
- Run:
$ kshell
k$ prove t/db_dependent/Circulation.t
=> FAIL: Tests fail because the behaviour is not correct
- Apply this patch
- Run:
k$ prove t/db_dependent/Circulation.t
=> SUCCESS: Tests now pass!
- Sign off :-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Came across those calls in bug 20598 in _FixOverduesOnReturn
Koha::Account::Offset->new(
{
debit_id => $accountline->id,
type => 'Forgiven',
amount => $amountoutstanding * -1,
}
);
This does nothing if you don't store data.
Test Plan:
1) Apply this patch
2) Set up 2 items with overdue fines
3) Return one with dropbox mode
4) Note the dropbox account offset is created
5) Return one with full fine forgiveness
6) Note the forgiven account offset is created
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Set search engine to Zebra
2 - Have some authorities and indexes up to date
3 - Search authorities with option 'search entire record'
4 - No results
5 - Apply patch
6 - Run unit tests, they pass!
7 - Repeat search
8 - Results!
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
0 - Apply patch
1 - Create a library group enabled for opac search limits and add some
libraries
2 - Check the DB (or advanced search dropdown) to get the id of the
group (using 7 as example below)
3 - Add to apache configuration (OPAC virtualhost)
SetEnv OPAC_SEARCH_LIMIT branch:multibranchlimit-7
SetEnv OPAC_LIMIT_OVERRIDE 1
RequestHeader add X-Koha-SetEnv "OPAC_SEARCH_LIMIT
branch:multibranchlimit-7"
RequestHeader add X-Koha-SetEnv "OPAC_LIMIT_OVERRIDE 1"
4 - Ensure OpacAddMastheadLibraryPulldown is disabled
5 - Restart all the things
6 - Visit the opac
7 - Perform a search, confirm it is scoped to the branches in the group
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
If Plack is running with several workers we must not use Cache::Memory
as L2 cache.
If a value is set from a worker, it will not be available from other
workers as the Cache::Memory instance is not shared (of course!)
Moreover we now have Koha::Cache::Memory::Lite that does the same job,
so we should not expect performance regressions by removing it.
See also the email sent to koha-devel for more info
http://lists.koha-community.org/pipermail/koha-devel/2018-December/045004.html
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Sponsored-by: National Library of Finland
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Also optimize it so it's actually usable.
Test plan:
1. To test it properly you need biblio and authority data. You might get away with enabling AutoCreateAuthorities and BiblioAddsAuthorities so that authorities are created in the process. Another option would be to import authorities first e.g. from LoC.
2. Make sure the authority index has been properly created with "misc/search_tools/rebuild_elastic_search.pl -a -d"
3. Run "misc/link_bibs_to_authorities.pl -v -l" twice and observe the results.
Sponsored-by: National Library of Finland
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 10306 changed behavior on cloning item subfields by no longer splitting
constructions like 'A | B' in item fields like ccode.
If it is really recommended to clone item subfields, I am not so sure
about. But this patch at least restores the possibility to do so while
we discuss if we should ;)
Test plan:
[1] Run Items.t
[2] Make an item subfield repeatable in framework. And test edit items.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Works as expected. Also fixes the display of collections on the items
table (on editing items).
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
[1] Correct POD for _FixOverduesOnReturn
Is called by AddReturn, AddRenewal and LostItem.
Also tested in Circulation.t btw
[2] $dbh is not used in _FixOverduesOnReturn
[3] Moving all parameters to the first line.
[4] Variable $uquery is not used too.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test Plan:
1) Ensure WhenLostForgiveFine is disabled
2) Create an overdue with a fine
3) Mark it lost with longoverdue.pl
4) Note it is still marked as an accruing fine
5) Apply this patch
6) Repeat steps 1-3
7) Note it is no longer an accruing fine!
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Followed the test plan and it works.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
We have the itemnumber no need to pass the issue_id, we can retrieve it
from chargelostitem
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test Plan:
1) Apply this patch
2) prove t/db_dependent/Accounts.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Michal Denar <black23@gmail.com>
[EDIT:]
Patch should have increased the number of tests obviously.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 9701 added 2 new columns to the table marc_tag_structure which broke
the import of biblio frameworks if the CSV file was generated with a
previous version.
Test plan:
- Export a biblio framework from 17.11
- Import it into 18.05+
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
https://bugs.koha-community.org/show_bug.cgi?id=21740
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
For the subscription we would like to keep the original internal note
(from the first order), to display it unmodified each time we receive
issues.
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
It will take too much time to fix the failures here, given the
simplicity of the subroutines I would be in favor of deleting them and
continue the move on a separate bug report to use Koha::Object-objects
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
I've checked that everything removed is no longer in use.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
These subs are no longer used from scripts and should be removed. It
should be done on a separate bug report given that additional work is
needed
Sponsored-by: Goethe-Institut
Signed-off-by: Christian Stelzenmüller <christian.stelzenmueller@bsz-bw.de>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Currently the call number splitting seems to be mostly implemented for
DDC and LC classifications.
Those are both not very common in some countries.
A lot of libraries use their own custom classification schemes so the call number
plitting is something that should be individually configurable.
This enhancement adds the ability to define custom splitting rules based
on regular expressions.
How does it work so far?
From C4/Labels/Label.pm there are 3 differents splitting methods defined, depending on items.cn_source.
if cn_source is "lcc' or 'nlm' we split using Library::CallNumber::LC
if cn_source is 'ddc' we split using a in-house method
Finally there is a fallback method to split on space
And nothing else is done for other cn_source
The idea of this patch is to mimick what was done for the "filing rules" and add
the ability to define "splitting rules" that will be used by the "Classification sources".
A classification source will then have:
* a filing rule used to sort items by callnumbers
* a splitting rule used to print labels
To acchieve this goal this enhancement will do the following
modifications at DB level:
* New table class_split_rules
* New column class_sources.class_split_rule
Test plan:
* Execute the update database entry to create the new table and
column.
I. UI Changes
a) Create/modify/delete a filing rule
b) Create/modify/delete a splitting rule
c) Create/modify/delete a classification source
=> A filing rule or splitting rule cannot be removed if used by a
classification source
II. Splitting rule using regular expressions
a) Create a splitting rule using the "Splitting routine" "RegEx"
b) Define several regular expressions, they will be applied one after
the other in the same order you define them.
Something like:
s/\s/\n/g # Break on spaces
s/(\s?=)/\n=/g # Break on = (unless it's done already)
s/^(J|K)\n/$1 / # Remove the first break if callnumber starts with J or K
c) You can test the regular expressions using filling the textarea with
a list of callnumbers. Then click "Test" and confirm the callnumbers are
split how you expected.
d) Finally create a new classification source that will use this new
splitting rule.
III. Print the label!
a) Create a layout. It should have the "Split call numbers" checkbox
ticked, and display itemcallnumber
b) Use this layout to export labels, use items with different
classification source ('lcc', 'ddc', but also the new one you have
create)
=> The callnumbers should have been split according to the regex you
defined earlier!
Notes:
* The update database entry fill the class_sources.class_split_rule
with the value of class_sources.class_sort_rule
If default rules exist it will not work, we should add a note in the
release notes (would be enough?)
* C4::ClassSplitRoutine::* should be moved to Koha::ClassSplitRule,
but it sounded better to keep the same pattern as ClassSortRoutines
* Should not we use a LONGTEXT for class_split_rules.split_regex instead
of VARCHAR(255)?
* class_sources.sql should be filled for other languages before pushed
to master!
IMPORTANT NOTES: The regular expressions are stored as it, and eval is
used to evaluate it (perlcritic raises a warning about it (Expression
form of "eval"). It can lead to serious security issues (execution of
arbitrary code on the server), especially if the modifier 'e' is used.
We could then remedy the situation with one of these following points:
- Assume that this DB data is safe (We can add a new permission?)
- Assume that the data is not safe and deal with possible attack
Cons: how be sure we are exhaustive? Making sure it matches ^s///[^e/]*$
would be enough?
- Use Template Toolkit syntax instead (Really safer?)
[% callnumber.replace('\s', '\n').replace ... %]
- Cut the regex parts: find, replace, modifiers
like we already do for Marc modification template. Cons: we are going to
have escape problems, the "find" and "replace" parts should not be
handle the same way (think "\n", "\\n", "\1", "\s", etc.)
I did not manage to implement this one easily.
Sponsored-by: Goethe-Institut
Signed-off-by: Christian Stelzenmüller <christian.stelzenmueller@bsz-bw.de>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Add EmailSMSSendDriverFromAddress system preference for overriding Email
SMS send driver from address.
How to test:
1) Run tests in t/db_dependent/Letters.t
2) All tests should pass
Sponsored-by: Gothenburg University Library
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1) git grep getcharges
-> should return no occurences
2) prove t/db_dependent/Accounts.t
-> should pass
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
[1] Construction with a // b instead of a; unless( a ) b;
[2] Error checking on subfieldCode
[3] Add explanation how to fill preference
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1. Run updatedatabase.pl
2. Set sysprefs MarcFieldForCreatorId, MarcFieldForCreatorName,
MarcFieldForModifierId, MarcFieldForModifierName
3. Create a new biblio
4. Verify that the fields are correctly filled
5. Logout and login as another user
6. Modify the same biblio
7. Verify that only the fields for last modifier have been modified
Works perfectly.
Signed-off-by: Simon Pouchol <simon.pouchol@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This is done to ease the move of C4::Items (bug 18252) to Koha::Items
my @itemnumbers = GetItemnumbersFromOrder($order->{ordernumber});
will become
my @itemnumbers = $order_object->items->get_column('itemnumbers');
Test plan:
- Create an order with several items
- Receive some items
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch allows to update borrowers informations with Shibboleth attributes
upon login.
Test plan:
1. In $KOHA_CONF, check that //shibboleth/sync is set to 1
2. Find an existing user and change one of the values mapped with a Shibboleth attribute
3. Log in using Shibboleth
4. Check that the value has been updated with the Shibboleth attribute.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Comments posted on Bugzilla.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Locale::Maketext does not allow correct handling of plural translation
for languages that have more than one plural forms.
Locale::Messages does.
So Koha::I18N is now a wrapper around Locale::Messages, just like
Locale::TextDomain, and export the same symbols as Locale::TextDomain.
You can refer to documentation of Locale::TextDomain to know how to use
exported subroutines.
Example usage:
__("Hi")
__x("Hi {name}", name => 'Bob')
__n("item", "items", $num_items)
__nx("one item", "{count} items", $num_items, count => $num_items)
__p("Bibliographic record", "item")
This patch also brings Koha::I18N power to Template::Toolkit templates
by adding a TT plugin.
This plugin can be used like this:
[%# USE the plugin and define some macros %]
[% PROCESS 'i18n.inc' %]
[%# tn is the equivalent of __n %]
[%# macro names can't start with underscore, t is for "translate" %]
[% tn('item', 'items', num_items) %]
Extraction of strings from templates is a bit complicated and use
Template::Parser and PPI. Template is compiled into Perl code and then
analyzed by PPI. It is slow, but should be correct even with complex
constructions.
Remove dependency to Locale::Maketext and Locale::Maketext::Lexicon
Add dependency to Locale::Messages and PPI
Test plan for translation in Perl code:
1. Open a .pl script or .pm module with your favorite text editor
2. Add 'use Koha::I18N;' in the beginning of file
3. Use one of the subroutines exported by Koha::I18N and be sure to have
a way to visualize the result (pass result to the template for
example, or simply warn and watch the log file)
4. cd misc/translator && ./translate update fr-FR # try other languages
5. Open misc/translator/po/fr-FR-messages.po and translate your
string(s)
You may need to change the "Plural-Forms" header. See
https://localization-guide.readthedocs.org/en/latest/l10n/pluralforms.html
6. ./translate install fr-FR
7. Use your web browser to go to the page that should display the
translation, change language and verify the translation is correct
8. prove t/Koha/I18N.t
Test plan for translation in templates:
1. Open a template file (.tt or .inc) with your favorite text editor
2. Add the PROCESS directive mentioned above in the beginning of file
3. Use one of the t* macros defined in i18n.inc. They are used like
their "__" equivalent, with one difference: the 'x' variants take a
hashref instead of a hash as last parameter
4. cd misc/translator && ./translate update fr-FR
5. Open misc/translator/po/fr-FR-messages.po and translate your
string(s)
6. ./translate install fr-FR
7. Use your web browser to go to the page that should display the
translation, change language and verify the translation is
correct
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
It adds the ability to return the result of GetHistory given a list a
ordernumbers
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The original WHERE condition wasn't enclosed in parenthesis, and hence
was subject to binding precedence issues in some situations.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch enables items to be skipped for inventory stocktaking
if the item is currently a waiting hold. The intention is to skip
items that should be on the holds waiting shelf in the library.
Test Plan:
1) Apply this patch
2) Generate a list of barcodes ordered by callnumber
3) Select one of those items and place it on hold, then confirm the hold
4) Remove that barcode from the list of barcodes
5) Browse to the inventory tool, choose your barcodes file
6) Run the inventory tool with that barcode file.
7) Note the tool says that item should have been scanned
8) Click the browsers back button to return to the previous page
9) Check the checkbox for "Skip copies marked as waiting holds"
10) Run the tool again, not it does not flag that item as previously
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
loading Koha::Schema ("use Koha::Schema;") takes significantly time as
it loads almost a couple hundred classes. Koha::Database has done that
already once and we can use it to get the ResultSet "Borrower" as
well, so let's use that. This also make the code more unified because
Koha::Database is used throughout the code instead of Koha::Schema.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch was generated using codespell
Test plan:
Read through changes and confirm they make sense
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
https://bugs.koha-community.org/show_bug.cgi?id=21706
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - prove -v t/db_dependent/Koha/Config/SysPrefs.t
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
[1] Fix two typos in Circulation.t.
Although the test does not fail, line 2127 contains two typos.
Changing INVISILE to INVISIBLE :)
And type should be itype.
[2] Remove $yaml as leftover from older code.
[3] Add a next when the split on /:/ does not give two results. This will
prevent uninit warnings (although still disabled now in Circulation).
[4] For the same reason we should switch the lines for NULL and empty
string. The undefs you insert should trigger a warn.
[5] The line for empty string should not insert undef, but empty string.
For the same reason adding the condition defined($_) ...
And proving it by adding two tests for the opposite values of
callnumber and itemnotes.
[6] Adding a strip spaces around the fieldname. User friendly..
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Define a rule to deny renewal
2 - Checkout an item meeting this rule
3 - Attempt renew an item via the OPAC
4 - Attempt renewal via SIP
5 - Attempt renewal via staff client
6 - Verify errors are reasonable
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test Plan:
1) Apply this patch
2) Note all references to reversing payments have been removed
3) Note ability to void payments remains unchanged
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Find a bib with 526$c and 526$d populated, or populate them
e.g. 526$a 5.5 | 526$d 14
2 - Try searching for 'arl:5.5' or 'arp:14'
3 - Your record should be returned in results
4 - Add the indexes as dropdowns by entering the following in intranetuserjs:
$(document).ready(function(){
// Add Accelerated Reading Level to advanced search
if (window.location.href.indexOf("catalogue/search.pl") > -1) {
$(".advsearch").append('<option value="arl">Accelerated Reading Level</option>');
}
// Add Accelerated Reading Point to advanced search
if (window.location.href.indexOf("catalogue/search.pl") > -1) {
$(".advsearch").append('<option value="arp">Accelerated Reading Point</option>');
}
});
5 - Search using these in the dropdown, your record will not be found
6 - Apply patch
7 - Repeat searches directly and by using dropdown, your record should be returned.
8 - prove t/db_dependent/Search.t
Signed-off-by: Margie Sheppard - Central Kansas Library System CKLS <msheppard@ckls.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
C4::Items::GetLastAcquisitions has been added by
commit 7753bbad4f
Adding Some new functions
(?)
Apparently it has never been used, we should remove it to avoid unnecessary maintenance.
Test plan:
git grep GetLastAcquisitions
must not return any results
NOTE: POD Coverage test failure is expected on removal
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
[1] searchResults: second my $interface can be removed: unused
[2] call of getitemtypeimagelocation on L2119 needs interface key
[3] ISBDdetail: No need to find patron again (line 182 vs 84)
[4] opac-search: No need to find patron twice (657 and 631)
[5] tabs on line 2220 of C4/Search.pm (qa tools warn)
[6] Ugly hack to overcome "Undefined subroutine &C4::Items::ModZebra"
by loading C4::Items before C4::Biblio when running tests
Koha/BiblioUtils/Iterator.t and Labels/t_Label.t.
This is a more general problem that needs attention somewhere else.
It seems that Biblio.pm is one of the suspects.
[7] This patch set makes Search.t crash/fail with me. Note that without
these patches Search.t still passed! Why o why..
A little debugging pointed me to a missing MPL branch (aarg).
Adding the simple test on the result of Libraries->find in
C4::Biblio::GetAuthorisedValueDesc made the test continue.
[8] Resolve: Variable "$borcat" is not available at opac-detail.pl line 246
Lexical $borcat cannot be used in sub searchAgain in opac-detail.pl
under Plack. Must be defined with our (or passed as argument).
[9] Resolve crash on TWO serious typos in opac-basket on ONE line:
Koha::Patron->find({ borrowernumber -> $borrowernumber })
Yeah: find is in Koha::Patrons and we need => !!
No need to pass a hash to find method btw for a pk value.
[10] Serious bugfixing here. Add List::Util to opac-basket.
Can't locate object method "none" via package "1".
You can't test everything :)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
After this longer list I renamed Final to Additional in the patch title :)
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
- Added missing GetHiddenItems parameter change case
Without this prove t had a failure.
- Always use mocks, not set_preference
- Tweaks so t/db_dependent/00-strict.t passes
There was a typo botcat vs borcat and borrowernumber was never
defined. Grabbing from userenv, like other code does.
- Tweak t/db_dependent/Items.t to fully test changes
This will test all the if structures fully in GetHiddenItemnumbers.
prove t/db_dependent/Items.t
- Tweak borrower category code
$borrower->{categorycode} on a Koha::Patron is not the
same as $borrower->categorycode. Fixed error.
- Search was returning URLS for wrong interface
There was one search context place wrong. Changed it to $is_opac
as the logic for setting $is_opac was modified correctly.
- Corrected issues with category code.
When a user isn't logged in, $borrower is undef and causes error
when determining category code. Added conditional check.
- Properly trigger all changes in C4/Search.pm
- Fix QA Test tool failures
C4/Search.pm had some tabs.
- Add some commenting to make sense of logic
- Refactor EmbedItemsInMarcBiblio parameters to hashref
- Trigger GetMarcBiblio's EmbedItemsInMarcBiblio call.
prove t/db_dependent/Items.t
- Add missing test to trigger Koha/BiblioUtils/Iterator change
- Add borrower category overrides
These files generally add borcat parameter to GetMarcBiblio.
Others might include correction of filtering of items
(opac-basket), or a comment as to why no changes were done
(opac-search).
In the case of opac-search, correcting the first FIXME will
likely correct the OpacHiddenItems issues on tags. As such,
that is beyond this bugs scope.
Some code had loop optimizations and fixes made, like a
'next unless $record' when the biblio shouldn't even be in
the list.
- Modify opac-ISBDdetail and opac-MARCdetail
Both files had similar logic. They were rearranged and
optimized, so that both files would have practically identical
initial blocks of code.
Optimizations were possible, because GetMarcBiblio
returns a filtered record, so that there is no double call
(once in the opac-### file and once in GetMarcBiblio) to
GetHiddenItemnumbers.
- Fix hiding in opac-tags
opac/opac-tags.pl was not properly hiding.
There is currently one known bug associated with tags left.
If you have two biblios tagged by different people with the
same tag, the opac-search will show the one you tagged that
is supposed to be hidden, because tag searches work differently
than regular searches. This is beyond the scope of this bug.
See the FIXME's in opac/opac-search.pl
- Trigger the C4::ILSDI::Services changes
prove t/db_dependent/ILSDI_Services.t
- Added missing 'my'
- Test C4/Labels/Label.pm changes
- Improve C4::Record::marcrecord2csv test cases
- Corrected opac-details searchResult call
- Fix breaking issues constraint in ITerator test
- Fix ILSDI_Services test when clubs with branch exist
- Rebased again!
- Rebased t/db_dependent/Items.t conflict.
The test plan is in comment #112 last I checked.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Edit: Fixing merge conflicts in
- t/db_dependent/Items.t
- t/db_dependent/Search.t
- C4/Search.pm
Changes the API for calling GetHiddenItems and all the places in the code that call it. This is to allow borrower categories to be passed in.
Adds an OpacHiddenItemsExceptions syspref to allow certain borrower categories to be able to see items, even if they are marked hidden by OpacHiddenItems
To test:
1) Make two borrowers, one in a category that should see everything (ie Adult), and another in a category that should only see certain things (ie Adult - exceptions)
2) Add the borrower that can see everything (the Adult) to OpacHiddenItemsExceptions
3) To the OpacHiddenItems syspref, add an item type (ensure that you have some records that fall under this type in your library).
4) Log in as the borrower that should only see certain things (Adult - exception)
5) Do a search, filtered to show records which are the item type that you specified in the OpacHiddenItems syspref. No records should show for this borrower as this item type is hidden to them.
6) Log in as the borrower that should see everything (Adult)
7) Do the same search. There should be results from this search, as this borrower category has been specified as an exception to the hidden items
Signed-off-by: Claire Gravely <c.gravely@arts.ac.uk>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Fix:
Incorrect integer value: '' for column 'offset'
Incorrect integer value: '' for column 'score'
Test plan:
Add/edit matching rules
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
[Strict SQL modes context]
For insert aqbudgetperiods:
Incorrect integer value: '' for column 'budget_period_id'
For insert/update aqbudgets
Incorrect integer value: '' for column 'budget_owner_id'
Incorrect decimal value: '' for column 'budget_encumb'
Test plan:
Add/edit budgets and funds
A good example of why we should use Koha::Object for all our objects
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To recreate:
- Go to a bibliographic detail page
- Delete it
- Go back
- Delete it again
=> Without this patch you will get a 500
Can't call method "holds" on an undefined value at
/home/vagrant/kohaclone/C4/Biblio.pm line 406.
=> With this patch applied it will silently redirect you to the search
form.
Note: We could/should improve the behavior and display a message, but
DelBiblio will need to be moved to Koha::Biblio->delete and other
callers adjusted
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - prove -v t/db_dpendent/Acquisition/GetBasketsInfosByBookseller.t
2 - Apply patch
3 - prove -v t/db_dpendent/Acquisition/GetBasketsInfosByBookseller.t
4 - It passes
5 - Have some open/closed and some fully and not full received baskets
6 - View a vendor and confirm baskets are shwn as expected
7 - Check 'Show all baskets' shows all baskets
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Note sure this is the best thing but it fixes the issue
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The loop to find all media has an $isyoutube variable. This was declared
outside the loop and never reset. Once a YouTube video was encountered
all subsequent videos were considered as YouTube. This patch reduces the
scope of the variable and resets per loop.
To test:
1 - Enable HTML5Media and HTML5MediaYouTube
2 - Add 856$u to record for a youtube vido and a pdf (sample record
attached to bug)
3 - View the record, the Play media tab has two video boxes
4 - Play the second, it fails
5 - Apply patch
6 - View record, Play media should include only one video link
Signed-off-by: Devinim <kohadevinim@devinim.com.tr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
0) Do not apply the patch
1) Enable ILS-DI
2) Go to
<opac_url>/cgi-bin/koha/ilsdi.pl?service=GetPatronInfo&patron_id=51&show_fines=1
use patron with some paid and unpaid fines
3) Save the page for later usage
4) Apply the patch
5) Repeat 2 with same patron and compare the saved result with the new
one, they should be same
6) git grep getcharges should return no occurance
7) prove t/db_dependent/Accounts.t
Co-authored-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
prove t/db_dependent/Acquisition/GetBasketAsCSV.t
Signed-off-by: Andrew Isherwood <andrew.isherwood@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Define a rule:
Matching rule code: LCAUTH
Match threshold: 100
Record type: Authority record
MATCH POINTS
Search index: LC-card-number
Score: 100
Tag: 010
Subfield: a
2 - Have a record with an LC number in 010
3 - Export it
4 - Edit the record in Koha, move the value from 010 to another field
5 - Import the original record
6 - Use the matching rule above, you expect it won't match (nothing in 010 anymore)
7 - It matches?!?!?!
8 - Enable zebra logging in koha-conf.xml
<zebra_loglevels>none,fatal,warn,request,info</zebra_loglevels>
9 - tail -f /var/log/koha/kohadev/zebra-output.log
10 - On manage marc apply matchign with no rule, then reapply with rule
11 - View the output in the log - the index searched is 'Any'
12 - Apply patch
13 - Reapply matching
14 - Note we search the expected index and no match is found
NOTE: By applying bug 21579, I was able to view the difference, and
see that it didn't match identically, because I had moved the
value from 010 to 155. No log checking needed. clean/delete batch.
Apply patch, no match. clean/delete batch.
Edit authority back, matches.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch changes the logic inside the method, to make it match the
behaviour described on the tests.
It uses the existing offsets on the account_offsets table to gather
information about the right things to refund.
To test:
- Run:
$ kshell
k$ prove t/db_dependent/Circulation.t
=> FAIL: Tests don't pass!
- Apply this patch
- Run
k$ prove t/db_dependent/Circulation.t
=> SUCCESS: Tests pass!
- Sign off :-D
Followed test plan, patch works as described. All three patches pass QA
test tool
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch substitutes C4::Accounts->getnextacctno for
C4::Accounts::getnextacctno since getnextacctno is only expecting to be
passed a borrowernumber
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes the same change as the main patch, just for an
additional occurance of getnextacctno
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1. Fetch and checkout the master branch
2. Checkout an item with a rental charge associated with it to a user
and notice an error is thrown
3. Apply patch
4. Restart memcached and plack
5. Repeat steps 1 and 2 and notice the checkout happens successfully
Sponsored-By: Catalyst IT
Signed-off-by: Andrew Isherwood <andrew.isherwood@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
git grep fixacccounts
-- without patch there are 3 occurences
-- with patch - no occurence of fixaccounts
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This is a follow-up patch for bug 14048 comment 97
Test plan:
git grep refund_lost_item_fee_rules.sql
should not return any results
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
'koha_kohadev.c.department' isn't in GROUP BY
Test plan:
Prove that the test fail without this patch and pass with this patch
applied (switch on the SQL modes)
Signed-off-by: Andrew Isherwood <andrew.isherwood@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
'koha_kohadev.creator_batches.description' isn't in GROUP BY
Fix t/db_dependent/Creators/Lib.t if strict sql modes is on
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Because if it's empty, it hasn't actually been created yet. Hiding the
field prevents a lot of errors
Sponsored-by: Catalyst IT
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds a 'description' column to the creator_batches table. The
description for a batch can be added and updated using ajax.
To test:
1) Apply patch and update database (you will have to restart memcached)
2) Go to Tools -> Patron card creator -> Manage batches
3) There should now be a Description column next to Batch ID. This
will be empty (as none of the batches have descriptions yet)
4) Click Edit for any batch
5) Notice new Batch description text field. Enter a description for
the batch in here and click Save description. Some text should show
saying the description was saved.
6) If you go back to the manage batches page, the description should
now show under the Description column.
7) Go to Tools -> Label Creator -> Manage labels
8) Repeat steps 3 to 6
Sponsored-by: Catalyst IT
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
While it doesn't have a practical effect (the variable is reset several
lines below) I agree this should be explicitly set to its default.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch implements the required changes in
C4::Reserves::CanItemBeReserved so it implements a daily limit on holds.
It returns the 'tooManyReservesToday' string if the policy doesn't allow
placing the hold. It returns 'OK' (current behaviour) otherwise.
To test:
- Run:
$ sudo koha-shell kohadev
k$ cd kohaclone
k$ prove t/db_dependent/Holds.t
=> FAIL: Tests fail because the error condition is not making
CanItemBeReserved return the desired error code.
- Apply this patch
- Run:
k$ prove t/db_dependent/Holds.t
=> SUCCESS: Tests pass!
- Sign off :-D
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
and avoid unecessary processing
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Tested and found correct AU data is returned, and passes QA test tool
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Two lines of code and move them earlier.
Add a check to make sure there are changes.
Followed the test plan, both the _BEFORE_ and after do as described.
Signed-off-by: Cori Lynn Arnold <carnold@dgiinc.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
DBD::mysql::db selectall_hashref failed:
'koha_kohadev.aqbudgets.budget_parent_id' isn't in GROUP BY [for
Statement "
at /home/vagrant/kohaclone/C4/Budgets.pm line 558.
and
at /home/vagrant/kohaclone/C4/Budgets.pm line 565.
Test plan:
hit /cgi-bin/koha/admin/aqbudgets.pl
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The idea of output_and_exit_if_error (added by bug 18403) is to make sure
parameters are valid before executing the script.
If not (old or broken URLs), we shortcut everything coming next to display a
generic error ("object does not exist", "you do not have permission to do that", etc.)
This bug report fixes the scripts under serials/*.
Test plan:
Hit the script under the serials directory with an invalid subscriptionid parameter
and confirm you get an error instead of the normal view with empty values.
The goal is not to be exhaustive during the first iteration, but at least to fix
the most common views.
For instance:
/cgi-bin/koha/serials/subscription-detail.pl?subscriptionid=XXX
/cgi-bin/koha/serials/serials-collection.pl?subscriptionid=XXX
/cgi-bin/koha/serials/routing.pl?subscriptionid=XXX&op=new
/cgi-bin/koha/serials/subscription-add.pl?op=modify&subscriptionid=XXx
/cgi-bin/koha/serials/subscription-add.pl?op=dup&subscriptionid=XXX
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This makes e.g. the advanced MARC editor, and anything that uses AddBiblio or
ModBiblio honor BiblioAddsAuthorities.
To test:
1. Make sure BiblioAddsAuthorities and AutoCreateAuthorities preferences are enabled.
2. Add a new record using advanced editor (enable EnableAdvancedCatalogingEditor to
use it), include a previously non-existing author.
3. Save the record and observe the author get an authority number.
4. Add another author, save the record and make sure it also gets an authority number.
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bulkmarcimport produces undefined subroutine error for
C4::Items::TransformMarcToKoha and C4::Items::GetMarcStructure
probably caused by mutually recursive modules. Put exports in
BEGIN clause before all the other imports.
To test:
1) Run bulkmarcimport.pl before applying patch and verify
that undefined subroutine error occurs
2) Apply patch
3) Run bulkmarcimport.pl again and verify that no errors are
produced
Sponsored-by: Gothenburg University Library
Signed-off-by: George Veranis <gveranis@gmail.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test Plan:
1) Create an item, do not set a collection code
2) Add the item to a course, and choose to set a collection code
3) Ensure the course is enabled, and the collection code is now visible
4) Disable the course, ensure the collection code is no longer visible
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test Plan:
1) Create an item, do not set a collection code
2) Add the item to a course, and choose to set a collection code
3) Ensure the course is enabled, and the collection code is now visible
4) Disable the course, ensure the collection code is no longer visible
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1. In $KOHA_CONF, check that //shibboleth/autocreate is set to 1
2. Find a user in Shibboleth that is not in Koha (or remove it from
Koha)
3. Login with that user
4. Verify that the userid is not set correctly in Koha database
5. Apply the patch (restart starman)
6. Repeat steps 2 and 3
7. Verify that the userid is set correctly and the other
mapped fields if there are some
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This is about $shib and $shib_login.
We move in the right direction by calling get_login_shib in
get_template_and_user and checkauth. In the same line we can do the
shib_ok check at that time (just checking cached values). This paves
the way for the third subroutine using the two package vars: checkpw.
Note that checkpw is also called outside Auth.pm. So I would be more
comfortable if we do the same calls like in checkauth and remove both
variables from the package level (especially under Plack of course).
The former changes actually justify a 'use C4::Auth_with_shibboleth'
instead of the current require and import.
Note: When calling checkpw from checkauth, we are calling get_login_shib
twice now. But the time involved for doing so is around zero (cache), so
not really an argument for extra parameters and complexer code.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Synchronizing:
C4/Auth_with_shibboleth.pm: if ( any { /(^psgi|^plack)/i } keys %ENV ) {
Koha/AuthUtils.pm: if ( ( any { /(^psgi\.|^plack\.)/i } keys %ENV ) && $ENV{SCRIPT_NAME} =~ m,^/(intranet|opac)(.*), ) {
about.pl:if ( any { /(^psgi\.|^plack\.)/i } keys %ENV ) {
Actually we should move it to a subroutine. New report please.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended the text a bit:
Hopefully, an uppercase important attracts slightly more attention :)
Added the bug number too.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
https://bugs.koha-community.org/show_bug.cgi?id=17776
Signed-off-by: Matthias Meusburger <matthias.meusburger@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
When stemming is enabled, in catalog searching "C4::Search::_build_stemmed_operand" will transform query operand into stemmed operand using stemmer Lingua::Stem::Snowball with a specified language.
This stemmer returns undef stemmed operand if no language is defined.
In main catalog search (catalogue/search.pl) current language is used.
But in other pages "acqui/neworderbiblio.pl" and "cataloguing/addbooks.pl" no language is defined so stemmed operand is empty and so stemming is not applied.
This patch corrects by returning in "C4::Search::_build_stemmed_operand" operand without change if no langage is defined.
And uses current langage in pages "acqui/neworderbiblio.pl" and "cataloguing/addbooks.pl" so all catalog search uses stemming.
Test plan :
1) Enable system preferences QueryStemming and QueryWeightFields
2) Disable system preferences QueryAutoTruncate, QueryFuzzy and UseQueryParser
3) Go to intranet main page and click on "Search the catalog" tab
4) Perform a search (without index) that uses the stemming, for example searching for "years" will also match "year"
5) Note how many results you get, for example "year" gets 24 results and "years" gets 24 results
6) Go to "Cataloging" module
7) Perform a search on same word in "Cataloging search" tab
8) Note how many results you get
9) Without patch you get fewer results than first search (step 5) because stemming is not applied, for example "year" gets 11 results and "years" gets 15 results
10) With patch you get the same results as first search (step 5) because stemming is applied, for example "year" and "years" gets 24 results
11) Same tests in aquisition module
12) On a basket, click "Add to basket" and perform a search in "From an existing record"
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Fix for:
'koha_kohadev.courses.department' isn't in GROUP BY
t/db_dependent/CourseReserves.t
A better fix would be to remove the joins and only return values from
the courses table. But more work is needed to acchieve that goal.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Test passes and the behavior of Course reserves appears to be unchanged
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Koha::CirculationRules->get_effective_rule will become the method to
call to retrieve a specific rule, we should start using it when
possible.
Moreover undef could replace '*' to mean 'any', that way we will be able
to add FK on circulation_rules
TODO: Add more tests
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Jesse Maseto <jesse@bywatersolution.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This is the first step in the circulation rules revamp as detailed
in the RFF https://wiki.koha-community.org/wiki/Circulation_Rules_Interface_and_Backend_Revamp_RFC
This patch moves the recent max_holds rule to the new circulation_rules table.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Go to the circ rules editor, note the new max holds rules
by patron category in the "Checkout limit by patron category".
( Should we rename this section? )
4) Create find a patron that is allowed to place a hold, count the
number of holds that patron has. Lets make that number 'X'.
5) Set the new max holds rule to X for "All libraries"
6) Note the patron can no longer place another hold
7) Set the new max holds rule to X + 1 for the patron's home library
8) Note the patron can again place another hold
9) Set the new max holds rule to X for the patron's home library
10) Note the patron can no longer place another hold
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Jesse Maseto <jesse@bywatersolution.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test Plan:
1-go to C4/Matcher.pm
2-verify there is no whitespace at line 25
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Misspelled variable causes _get_outstanding_holds to crash
if patron is queued on biblio level
Caused by
commit 62a075987a
Bug 21184: Replace C4::Items::GetBarcodeFromItemnumber calls
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds an "IN" option to the AmazonLocale setting, allowing
Indian libraries to use their Amazon Affiliate ID in Koha's links to
Amazon.
To test, apply the patch and run updatedatabase.
- Go to Administration -> System preferences -> Enhanced content.
- Enable the OPACAmazonCoverImages preference.
- Enter a dummy ID in the AmazonAssocTag preference.
- Confirm that you can select "Indian" for the AmazonLocale preference.
- Select "Indian" and save.
- Open a record in the OPAC and confirm that the cover image links to
Amazon.in and includes the ID you entered in AmazonAssocTag.
- Do the same with a record in the staff client.
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The expected items query wasn't consistent with other queries in this
module with regards to identifying cancelled orders
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To reproduce:
1) Create a basket with 2 biblios, one with 2 items and one with 1 item
2) Search for vendors and note the basket above should contain 'Item
count 3', 'Biblio count 2', 'Items expected 3'
3) Receive shipment, and only receive 1 of the items on the biblio with
2 items above.
4) Search for vendors and note that the 'Item count' for the basket
above is now '2'.
The item count for a closed basket should remain the same and should
differ from the 'items expected' count some items have been recieved.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended patch:
FAIL C4/Acquisition.pm
FAIL spelling
RECIEVED ==> RECEIVED
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
What we were doing was wrong and is still wrong. The output_pref should not be done
in modules or script, only template side.
Much more work would be needed to clean the situation. This patch provides less changes
as possible to, hopefully, not introduce side-effects.
To recreate:
1 - Enable decreaseLoanHighHolds, set to 1 day and more than 0 holds
2 - Set TimeFormat to 12 hour
3 - Find or create a record with two items
4 - Place a hold on one of them
5 - Checkout the other to a different patron
6 - Note the warning message display correct time
7 - Confirm the checkout
8 - Note the item is due at 11:59AM
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This fixes 2 related problems:
1) The editor only offered 3 entries from biblio for adding to the notice:
title, author, serial
It was not clear that actually all fields from biblio can be used.
2) It was not possible to use fields from biblioitems in the notices
which left out important fields like the ISSN.
The patch adds the biblioitems table and changes the editor to show
all entries from biblio and biblioitems table are shown on the left.
To test:
- Create a subscription
- Generate next issue a few times to get late issues
- Create a new notice in the "Claim serial issue" module
- Use fields from different/all tables
- Make sure an email address is set for
- the vendor (also check for 'receives claims for late issues')
- your staff user
- Go to serials > claims
- Claim multiple issues
- Verify the email is generated and contains the correct information
Example notice:
Title: <<biblio.title>>
Author: <<biblio.author>>
ISSN: <<biblioitems.issn>>
ISBN: <<biblioitems.isbn>>
Issue: <<serial.serialseq>>
--
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
- This patch adds shibboleth authentication to the staff client.
- Depending upon how your url structure works, you may or may not need a
second native shibboleth service provider profile configured for this
to work.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes it possible to add an extra column to Z3950 search results.
The system preference AdditionalFieldsInZ3950ResultSearch decides which MARC field/subfields are displayed in the column.
Testing:
I Apply the patch
II Run updatedatabase.pl
ACQUISITIONS
0) Enter a field/subfield in the AdditionalFieldsInZ3950ResultSearch
1) Create a new basket or use an existing one
2) In -Add order to basket-, click "From an external source"
3) Select some search targets and enter a subject heading ex. house
4) Click Search bouton
5) Validate "Additional fields" column with the field/subfield value.
CATALOGUING
0) Shares same syspref as above
1) Go to cataloguing, click New from z3950
2) Fill to result in a successful search
3) Validate column Addition Fields
prove t/db_dependent/Breeding.t
Sponsored-by: CCSR (https://ccsr.qc.ca)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1) Apply the patch
2) prove t/db_dependent/Breeding.t
3) Try to search using Z39.50, both, authority and biblio should still
work
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
1) Apply the patch
2) Go to administration and set up a z39.50 authority server, which does
support searching by control number (use attribute 12), you can use czech
national library server:
host: aleph.nkp.cz
port: 9991
base: aut-utf
format: MARC21
encoding: UTF-8
3) Try to find an authority by control number using z39.50 - if you use the server
recomended in point 2) there is web access to the base at
http://aleph.nkp.cz/eng/aut
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Fixed a typo in a code comment and a whitespace issue in the template.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
When circ rules are set to cap at item replacement cost, calcfine only
checks the price in the item record, not the default replacement cost by
item type.
Note: We do not take '0' into account, what if you do not want to set
a replacement cost for an item? It is how it is done in chargelostitem
so keeping the existing behaviour, but that may be considered as a bug (?)
Test plan:
- Set useDefaultReplacementCost to use
- Set a default replacement cost for a given item type
- Create an item of that type with a replacementcost=0
- Create a circ rule for that item type that accrues fines but caps at
replacement cost
- check the item out, forcing a due date in the past
- check that item in
=> Fines should have been generated
Signed-off-by: Caroline Cyr La rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Multi params are not handle correctly after login
Test plan:
[0] Use staff interface
[1] Use advance search and tick itemtype more than one checkbox
[2] Copy result url
[3] Logout
[4] Paste url in browser
[5] Type username and password
[6] In search result page, results limit description under breadcrumbs
will show all limits
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Added a (initially trivial) test in Creators/Lib.t too.
Sometimes you start something, but you end somewhere else ;)
The test seems a bit slower now (regex, lookahead, etc). But this should
not hurt label creators in daily use.
Advantages: code is even more solid, consolidated in one place and can be
tested on its own.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
TEST PLAN
---------
1) apply first patch
2) kshell kohadev
3) prove -r -v t/db_dependent/Creators/
-- failures
4) apply this patch
5) repeat 2,3
-- no failures
6) run koha qa test tools
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
'rows' is a reserved word since MariaDB 10.2.4 and MySQL
https://mariadb.com/kb/en/library/mariadb-1024-release-notes/https://dev.mysql.com/doc/refman/8.0/en/keywords.html
Test plan:
Do not apply this patch and make sure you recreate the reported issue
Apply this patch and confirm that it is now fixed.
QA will take care for the changes in installer and test files
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
If you choose to enforce GDPR policy, a user needs to give consent for
data processing before he does something else in the OPAC while being
logged in.
Test plan:
[1] Set GDPR_Policy to Disabled or Permissive. Usual behavior.
[2] Set to Enforced. Save a refusal on your consents. Notice that
you are logged out when saving. When you login again, all OPAC
requests are redirected to your consents tab.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
It is possible to set up circulation rules to limit trapping of holds by pickup library and itemtype.
To make it easier to understand which holds will be trapped in a given circumstance,
it would be nice if we could optionally group holds by pickup library and/or itemtype.
Test Plan:
1) Apply this patch set
2) Run updatedatabase.pl
3) Enable AllowHoldItemTypeSelection
4) Pick a record and create holds with various pickup libraries and itemtype combinations
5) Enable HoldsSplitQueueNumbering
6) Try the different combinations of HoldsSplitQueue
7) Ensure the hold "arrows" move the items correctly
* Up and down arrows should move hold above or below the adjacent hold within a hold fieldset
* Top and borrom arrows should move hold to the top or bottom within a hold fieldset
Sponsored-by: Stockholm University Library
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Followed test plan, patch worked as described. Also passed QA test tool
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Andreas Hedström Mace <andreas.hedstrom.mace@sub.su.se>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The bug is that $sessionID is declared twice in C4::Auth::checkauth().
At the moment, this doesn't actually create a problem, because no
one seems to be using the $sessionID which is returned by checkauth(),
except in the case of opac/external/overdrive/auth.pl which skips
the second declartion as it doesn't require auth.
This patch removes the redefining of the $sessionID variable.
In terms of testing, try logging in with a username and password
and see if it works. The only risk this patch would pose is breaking
auth I would think, since nothing is actually using the return value
from checkauth() for $sessionID.
NOTE:
It was initially defined near the top of the function (~line 791).
I believe the scoping would mean the correct version of $sessionID
would be used in the latter lines for the unset'ing.
I have skimmed code to see if the sessionID return value is used.
I did not test overdrive, as I do not know how. However, this is
the only area, I think this could possibly break. This change makes
sense to me.
QA: Please test overdrive.
opac/external/overdrive/auth.pl only checks if the value is set, so
this patch might fix/break something there?
opac/svc/overdrive same kind of check.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
This is a (tiny) code improvement. Now we consistently return the session
id that is also stored in the returned cookie. (Which can be an 'anon'
session.)
Fact is that Koha almost everywhere ignores the returned session id and
sometimes gets the session from the cookie (obviously). The session id is
also passed to the template by get_template_and_user but never used in
templates.
As mentioned, the two overdrive scripts are the exception. But since both
test on both $user && $sessionID, they will not choke on an anynonomous
session id without userid. So theoretically fine, but not tested.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This table was only used by XISBN, this patch remove the table and the
related code (cronjobs)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
https://bugs.koha-community.org/show_bug.cgi?id=21235
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This dependency is missing from the PerlDependencies.pm file.
This patch adds it.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds $branchcode_to parameter to CanBookBeReserved and
CanItemBeReserved. It represents the pickup location for the hold.
To test:
1. prove t/db_dependent/Holds.t
Signed-off-by: Koha Team AMU <axelle.clarisse@univ-amu.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
0 - Apply patches and updatedatabase
1 - Add an order to a basket
2 - You should note new 'Retail price field'
3 - You should have a separate 'Replacement price' field
4 - Enter values and ensure they are saved as expected
5 - In the basket you should see the replacement price
6 - Modify order and ensure value is loaded and saved correctly
7 - Add and cancle an order and esure replacement price shows/saves
8 - Close basket
9 - Receive an order
10 - You should be able to edit replacement price
11 - 'retail price' field is not editable
12 - Check associated item, replacement price in item should be updated
13 - Cancel receipt, check item. receive again with new replacement
price, check item
14 - Price should be correctly updated
15 - Finish receipt, value should show in table
16 - Test with receive from file
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Remove:
- BIB_INDEX_MODE and AUTH_INDEX_MODE env var
- bib_index_mode and auth_index_mode options from scripts
- Warnings from about page, just kept one if zebra_bib_index_mode or
zebra_auth_index_mode still exist in config and are set to grs1
Test plan:
- Install Koha from src
- Install Koha from pkg
- Read the code, carefully!
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Rebased
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Those calls to C4::Items::GetItemnumbersForBiblio can be replaced with
my @itemnumbers = Koha::Items->search({ biblionumber => $biblionumber})->get_column("itemnumber")
Test plan:
- Use the GetAvailability service of ILS-DI
- Try to place a hold on an item that is available and another one
- Use the batch record deletion tool to remove record with and without items.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1) Set up your SIP: https://wiki.koha-community.org/wiki/Koha_SIP2_server_setup
2) Run:
misc/sip_cli_emulator.pl -a localhost -p 6001 -su <login> -sp <passsword> -l <library_code> --patron <borrowernumber> -s "Y " -m patron_information
the -s parameter says what kind of additional information you want to see
3) Check the response: if the requested patron has waiting hold, there
is field "AS" with the barcode of waiting item
The right response looks like this:
64 00120180817
052434000100000000000000000000AOCPL|AA1|AEKoha Admin|BLY|CC5|AS39999000004410|PCS|PIY|AFGreetings from Koha. |
More reading ;)
http://multimedia.3m.com/mws/media/355361O/sip2-protocol.pdf
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
git grep GetBarcodeFromItemnumber
should not return anything
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Those calls to C4::Items::GetBarcodeFromItemnumber can be replaced with
my $barcode = Koha::Items->find($itemnumber)->barcode;
But if we are not sure that the item exists, we should test the return
of ->find before ->barcode
Test plan:
- Edit an item
- Check an item in
- Test SIP - I do not really know how to trigger that code, apparently
misc/sip_cli_emulator.pl does not deal with holds. Any ideas?
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
http://lists.koha-community.org/pipermail/koha-devel/2018-August/044757.html
Prior to this patch, GetRecords returned timestampX, cardX and borrowerX for
the last 3 patrons who checked out the items.
I have no idea if it is a desired effects but, as this code has been
there for a very long time (2005), I suspect it's not.
The "doc" (/ilsdi.pl?service=Describe&verb=GetRecords) does not say
anything about the checkouts info.
Test plan:
hit /ilsdi.pl?service=GetRecords&id=1
and confirm the info about items are displayed correctly
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
C4::Items::GetItemnumberFromBarcode calls can be replaced with
Koha::Items->find({ barcode => $barcode });
We should make sure the barcode existed in DB and so that ->find
returns an object. Note that most of the time we just wanted to know if
the barcode existed.
The changes are very simple, the only one that need attention is
the one in batchMod.pl. It is basically reusing what we did on
bug 21141.
Test plan:
Use the batch item modification/deletion tools to modify/delete items
from their barcode (using the textarea or a file)
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
git grep GetItemnumberFromBarcode
should not return anything
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch is a little fix for a much bigger hidden issues.
The original issue:
1. Set the firstname and surname values of a paontr to utf-8 characters
("wide characters"), for instance 月月
2. Use this patron to login at the staff interface
=> In the header the logged in patron's info (concat of firstname and
surname) are displayed correctly
3. Hit whatever link
=> In the header the info are now displayed incorrectly
("ææ")
What happens?
After that the user loggin, loggedinusername is set with the value from
the DB (borrowers.userid)
On next hits it is picked from the session (which contains the decoded
utf8 value, see first lines of C4::Context->set_userenv)
From C4::Auth::checkauth:
834 $s_userid = $session->param('id') // ''
The quick fix is to use the logged_in_user variable in the template, but
it seems that issues may occurred if external authentication is used
(ldap, shib, cas). Could someone test this?
Test plan:
Make sure the original issue is fixed
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
When the syspref BlockReturnOfLostItems is set to Block, the item is blocked from being returned, but is still considered found -- it's set to lost=0 and a refund is applied to the patron (if circ rules allow). The item can then be checked in a second time and returned as it is no longer lost.
Test Plan:
1) Set an item to lost
2) Set BlockReturnOfLostItems to Block
3) Check the lost item in
4) Checkin message should say item is lost and cannot be returned
5) Check lost status of item, it should remain unchanged
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 11401 introduced code to support Norwegian national library card.
This code is too specific to be part of Koha as it, it should be a
plugin instead.
Moreover nobody uses it, but a modified version (see comment 3).
Test plan:
Add/edit/delete patron and make sure there are no regressions introduced
by these patches
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@deichman.no>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
It's possible to set a limit on the maximum number of holds for a particular branch/category/itemtype, but not on the total number of holds for a given patron (by branch/category).
This new rule works in conjunction with the existing branch/borrower/item rules in that Koha will use the lower of the two limits. This new rule counts all holds of all types, which prevents bib-level holds from not being counted for the purpose of these limits. This makes the most sense and was also requested by the sponsor.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Go to the circ rules editor, note the new max holds rules
by patron category in the "Checkout limit by patron category".
( Should we rename this section? )
4) Create find a patron that is allowed to place a hold, count the
number of holds that patron has. Lets make that number 'X'.
5) Set the new max holds rule to X for "All libraries"
6) Note the patron can no longer place another hold
7) Set the new max holds rule to X + 1 for the patron's home library
8) Note the patron can again place another hold
9) Set the new max holds rule to X for the patron's home library
10) Note the patron can no longer place another hold
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To duplicate the budget, the function CloneBudgetHierarchy create a new budget
from the old without the parameter timestamp, so that the database generates a
new one.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Added unit tests to patch
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Modified to run properly the QA tests
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
RemoveLostItem was 'used' in C4::Accounts, but is not
actually used there.
Call has been removed by
commit ed9cf81c3a
Bug 15896 - Use Koha::Account::pay internally for makepayment
To test:
- Verify that the routine was actually not used!
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
If an item is no longer issued but somehow still has a date in the onloan
column, checking it in should clear that date.
Adding a ModItem call in the NotIssued section.
Test plan:
[1] Run t/db_dependent/Circulation.t
[2] Bonus: Checkout item, delete issue from table, checkin. Verify that
items.onloan has been cleared.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Charles Farmer <charles.farmer@inLibro.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
Ideally tested on a working ldap server with bind by auth and no
anonymous bind
1 - Define an LDAP config with bind by auth
2 - Don't define user/pass
3 - Define anonymous_bind = 0
4 - Attempt bind by auth
5 - Error is something like:
LDAP search failed to return object : XXXXXXXXX: LdapErr: XXXX-XXXXXX,
comment: In order to perform this operation a successful bind must
be completed on the connection., data 0, v2580 at
/usr/share/koha/lib/C4/Auth_with_ldap.pm line 102.
6 - Define user/pass
7 - Now bind by auth should work
8 - remove user/pass
9 - Apply patch
10 - Attempt again
11 - Bind by auth shoudl succeed
prove -v t/db_dependent/Auth_with_ldap.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Caused by
commit cb336e633b
Bug 18255: Koha::Biblio - Replace GetBiblioItemByBiblioNumber with Koha::Biblio->biblioitem
Can't call method "biblioitem" on an undefined value at /home/vagrant/kohaclone/C4/ILSDI/Services.pm line 212
Test plan:
- Enable ilsdi
- hit /cgi-bin/koha/ilsdi.pl?service=GetRecords&id=X
With X an existing biblionumber and a non existing one
Both requests must succeed
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The step to install optional/mandatory things is broken with
many <br />'s instead of line breaks.
TEST PLAN
---------
1) Back up database
2) Drop database
3) Create empty database
4) Run web installer
-- Notice that step 3 has ugly <br />'s at the last
part of step 3.
5) Apply patch
6) Repeat steps 2-4
-- Notice the <br />'s are now nice line breaks.
NOTE: No promises of perfect positioning!
7) Run koha qa test tools.
Joubu: I have no idea if this is still needed. TO TEST
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
https://bugs.koha-community.org/show_bug.cgi?id=13618
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
OCLC has decided to retire all xISBN services:
https://www.oclc.org/developer/news/2018/xid-decommission.en.html
The code for related features has to be removed from Koha.
Test plan:
You need to be familiar with the different sysprefs (I am not):
- FRBRizeEditions
- SyndeticsEnabled
- SyndeticsEditions
- ThingISBN
Make sure there are no regressions introduced by this patchset.
QA Note: C4/XISBN.pm should be renammed
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch set does several things:
- it removes USER_INFO and BORROWER_INFO
These 2 variables contained logged-in patron's info. They must be
accessed from logged_in_user
- Use patron-title.inc for the breadcrumb at the OPAC, for consistencies
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
When generating the checkout notice for a patron we only update the
section in between the '---' tags
For template toolkit purposes it means we cannot affect the content
based on more than a single item. For instance, we want to add the total
cost of all items checked out.
Test Plan:
1) Add "Thank you for visiting <<branches.branchname>>." to the bottom of the checkout notice. Below the second '----'.
2) Check out an item to a patron to generate that notice
3) Note the branch name in the notice
4) Update the branch name in the branches editor, change it to something else
5) Check out a 2nd item to that patron
6) Notice the items list updated, but the branch name did not
7) Apply this patch
8) Check out a 3rd item to that patron
9) Notice the branch name updated this time
Signed-off-by: Te Rauhina Jackson <terauhina.jackson@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Resolve:
FAIL C4/Output.pm
FAIL pod
*** ERROR: Apparent command =cut not preceded by blank line in file C4/Output.pm
FAIL pod coverage
POD is missing for output_and_exit
Test plan:
Run QA tools again.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
No test plan found ;)
But tested bookcount and request-article.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Re-did the patch to follow best practices.
TEST PLAN:
0. Apply first patch only
1. prove t/db_dependent/Circulation.t
2. Apply second patch
3. prove t/db_dependent/Circulation.t
prove should fail the first time and pass the second time.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
Run these commands, grep should not return any occurences, prove should
return green:
git grep GetSerialStatusFromSerialId
git grep GetDistributedTo
git grep SetDistributedTo
git grep SetDistributedto
git grep in_array
git grep is_barcode_in_use
kshell
prove t/db_dependent/Serials.t
Signed-off-by: Pierre-Luc Lapointe <pierreluc.lapointe@inLibro.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To recreate:
1 - Place a hold in your system
2 - Set that hold (or all holds) to expire today
update reserves set suspend_until=CONCAT( CURDATE()," 00:00:00");
3 - Run misc/cronjobs/holds/auto_unsuspend_holds.p
4 - Note the hold is sitll suspended
5 - Visit /cgi-bin/koha/reserve/request.pl for the book with the hold
6 - Note the suspend date is tomorrow (and cannot be set to today]
7 - Click update holds - the date in db is now set to tomorrow
8 - Reset to today
9 - Apply patch
10 - Run the cron again
11 - Visit the page and note hold is unsuspended
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
See Bugzilla comment 7. This change does not belong here and is
dubious on its own. Needs further attention on another report.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended: In consultation with the author the same change is applied to the
corresponding lines in Z3950SearchAuth.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
- Apply the patch
- Add an SRU authority server in admininistration -> Z39.50/SRU servers
You can try with the French national library, configured as such:
Hostname: catalogue.bnf.fr
Port: 80
Database: api/SRU
Syntax: Unimarc
Record type: authority
Additional SRU options: version=1.2,sru=get
SRU Search fields mapping example:
Keyword (any): aut.anywhere
Name (any): aut.anywhere
Author (any): (aut.type any "pep org") and aut.accesspoint
Author (personal): aut.type=pep and aut.accesspoint
Author (corporate): aut.type=org and aut.accesspoint
Author (meeting/conference): aut.type=org and aut.accesspoint
Subject heading: (aut.type any "geo ram_nc ram_ge ram_pe ram_co") and aut.accesspoint
Subject sub-division: aut.type=ram_pe and aut.accesspoint
Title (any): (aut.type any "tic tut tum ram_tp ram_tu") and aut.accesspoint
Title (uniform):(aut.type any "tut tum ram_tu") and aut.accesspoint
- Try a search from Authorities -> New from Z39.50/SRU
- Check that the authority is correctly displayed in "Show Marc"
- Check that the authority is correclty added to koha in "Import"
- prove t/db_dependent/Breeding.t
Signed-off-by: François Pichenot <fpichenot@ville-roubaix.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: John Doe <you@example.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It's safer to send what we need from C4::Auth it's needed from a whole
module.
The SELECT COUNT(*) query will only be done when needed (so not made
from scripts outside of circ)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Move to aqinvoice_adjustment
Move to Koha::Acquisition::Invoice::Adjustments
Test if variable exists before count
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Two koha professionals agreed, also it is current behvaiour so this
patch removes a change
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patchset adds the ability to add adjustments to an invoice, one can
provide a reason, an adjustment amount, select a budget, and choose
whether to encumber the funds before the invoice is closed or not
To test:
1 - Create a new invoice with or without a shipping cost
2 - Note there are no existing adjustments
3 - Add an adjustment
4 - Submit the form withno changes, nothing happens
5 - Update the adjustment you created, ensure changes are saved but no
extra adjustment created
6 - Add another invoice prodiving only reason or amount (you can have 0
value adjustments)
7 - Verify the adjustment total at bottom is correct
8 - Recieve some orders
9 - Verify totals are correct
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Add/Update would update a field or create new if it existed, but didn't
allow for creating new if the field existed.
This patchset splits the options to 'Add & Update' so that 'Add' will always
add a field and 'Update' will operate as it always has
To test:
1 - Have a record with a known existing field (make a copy)
2 - Define a marc modification template that 'Add/update' on that field
3 - Define an 'Add/Update' on a field that doesn't exist
4 - Batch modify the copy of record using the above template
5 - Verify the existing field was updated
6 - Verify the non-existing field was updated
7 - Apply patch and update database
8 - Make another copy
9 - Modify the copy with the same template as above
10 - Should match initial modification
11 - Add a new rule to add a new field
12 - Modify using the updated template
13 - Ensure your new field is created
14 - Test various options in the modification tool
15 - prove t/db_dependent/MarcModificationTemplates.t
Signed-off-by: Victor Grousset <victor.grousset@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Rather than using the raw ccode's use the labels as defined in the
authorized values.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds the index definitions for zebra faceting of ccode in
koha for marc21, normarc and unimarc.
We also add lines to the templates to expose the new facet and enable
non-zebra faceting for ccode too.
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
But actually we could remove it if it does not make sense for other use.
Callers could deal with it since the password is not generated here
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
I am not sure I understood the point of this subroutine.
Did I miss something here?
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
t/db_dependent/Holds/RevertWaitingStatus.t ..
Undefined subroutine &C4::Circulation::MoveReserve called at /home/vagrant/kohaclone/C4/Circulation.pm line 1316.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The new_record_from_zebra subroutine assumes that when using ES we
always get MARC::Record objects when using ES, but sometimes we get them as xml via Z39 or
internally. This adds a test to new_from_zebra to confirm we have a
record object and to convert it if not
To test:
1 - Perform an advanced search from the advanced editor, make sure to
select 'Local catalog' and a remote source
2 - Error 'Internal search error [Object object]'
3 - Apply patch
4 - Repeat search, success!
5 - Select and deselect various servers, search should still work
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Clone was not declared a dependency before. It used to be a dependency
of Hash::Merge but isn't in the recent version.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
== Test plan ==
This is an oversimplification of a full patron card setup used in production.
1. Create a batch with 1 patron
2. Create a layout and set
the name
"Print card number as barcode"
"Barcode type:" to "Code 39"
3. Create a card template without filling anything
4. Export the batch using the layout and template
5. You should have a white page with a barcode
And no errors in the relevant log file
This show that this setup isn't completely bogus
(although Code 39 is the only type working...)
6. Layout: set "Barcode type:" to Industrial2of5
7. Export the batch
8. You should have a white page with no barcode
And errors in the relevant log file
"Invalid Characters"
This is the bug.
9. Layout: set "Barcode type:" to COOP2of5
10. Export the batch
11. You should have a white page with no barcode
And errors in the relevant log file
"Invalid Characters"
This is the bug.
12. Apply this patch
13. Retry with both non-working patches
1. You should have a white page with a barcode
2. And no errors in the relevant log file
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
- Use a patron with an empty cardnumber to authenticate with ILSDI
AuthenticatePatron
(cgi-bin/koha/ilsdi.pl?service=AuthenticatePatron&username=userid&password=pass),
- make sure you have other patron(s) with empty cardnumber and there
borrowernumber is
smaller than the one you authenticate with,
- you should get a wrong borrowernumber,
- apply this patch,
- test again, you should get the right one
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Caused by
commit 546379cc92
Bug 17680: C4::Circulation - Remove GetItemIssue, simple calls
Since this commit AddReturn return a Koha::Issue object, not a hashref
with item's info.
Test plan:
1 - Enable SIP server on your test instance
For kohadevbox:
cp /etc/koha/SIPConfig.xml /etc/koha/sites/kohadev/
create patron with user/pass term1/term1 and grant circulation
privileges
2 - enable AutomaticItemReturn
3 - Checkin an item which will generate a transfer via SIP2:
perl /home/vagrant/kohaclone/misc/sip_cli_emulator.pl -a localhost -p
6001 -su term1 -sp term1 -l LPL --item {BARCODE} -m checkin -t
CR
4 - Note no CT field
5 - Apply patch
6 - Repeate checkin via SIP2
7 - Transfer destination is correctly returned in CT
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
In Breeding.pm we let Z3950Search return the xslt handler error codes back
to the template. They are converted to text messages by using an new include
file (added for opac and intranet now). The generic xslt_err code is now
obsoleted.
In Record.pm the errstr call is removed. The croak is done with the new
error code in err. This seems sufficient.
Test plan:
[1] Run Breeding.t
[2] Run Record.t
[3] Add a nonexisting xslt file to one of your Z3950 targets. Search on that
target and check if you see a error 'XSLT file not found'.
The bonus is these error messages are now translatable as they are in
the templates
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - prove t/db_dependent/Reports/Guided.t
2 - grep "get_saved_report" - ensure there are no occurences of the
singular form
3 - create, save, edit, and convert a report
4 - access a public report and report json from opac and staff client
5 - Ensure all function as expected
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
We do no longer need "use Koha::UploadedFile" in a few places.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
As explained in bug 20428 use tmpdir can cause issues and it just makes sense to standardize our temp directory in a universal way.
Test Plan:
1) Apply this patch
2) Verify you can still log in and use Koha
3) Verify the web installer still works
4) Verify EDI module can still download files via FTP
5) Verify fines.pl still runs with -o option
6) prove t/db_dependent/Plugins.t
7) prove t/db_dependent/Sitemapper.t
8) prove t/db_dependent/Templates.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Add unsafe param to GetMarcSubfieldStructure and use this options
where it's safe to do so to increase performance
Sponsored-by: Gothenburg University Library
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 20400 added a routing list tab to the patron account in the
OPAC using Koha::Object. After changing the staff view too,
we can now safely remove GetSubscriptionsFromBorrower as it
is no longer used.
To test:
- Make sure that GetSubscriptionsFromBorrower is no longer used.
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Triggered by the finding on bug 20697.
The three calls of GetHostItemsInfo should be controlled by the pref. This
patch makes the sub return an empty list when the pref is disabled.
The patch simplifies the sub by merging the two identical foreach loops
depending on the field number in MARC21/UNIMARC.
Will add a unit test on a follow-up patch.
Test plan:
See next patch.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Due to a simple typo, the accountline passed to Koha::Account::pay from _FixAccountForLostAndReturned is not used. That means that the credit for the lost item fee may be applied to other fees before it is used on the lost fee itself.
Test Plan:
1) Find a patron with existing fines
2) Ensure your settings will charge patrons for lost items
3) Check out an item to a patron with existing fees that need paid
4) Mark the item lost, charging the lost item fee
5) Return the item
6) Note the fee was refunded, but it paid down earlier fines first,
and not the lost item fee first
7) Apply this patch set
8) Repeat steps 1 - 5
9) Note the lost item fee is the first fee to be paid off by the lost
item fee refund
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Followed the test plan and it works as expected.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
After review of the code it turns out that the management permission
that has been marked as deprecated a long time ago, does not have
any function.
The patch removes all remaining code related to it.
To test:
- Make sure you have a patron with the management permission
- Apply patch
- Run database update
- Check everything still works as expected
Bonus:
borrowers.flags is recalculated for patrons with management
permission.
To check:
- Create some 'permission twins' with and without management
permission
- Note the value in borrowers.flags
- Apply patch, don't run database update
- Save permissions from GUI for one of the twins
- Note the newly calculated value
- Run database update
- Now both twins should have the same borrowers.flags value
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
0/ Do not apply the patch
1/ Confirm the new test fails
2/ Apply the patch
3/ Confirm the new test passes
4/ Test the installation process
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
[1] passing unsafe has no use since it is a scalar, removed it to unconfuse
[2] remove caching when pref is disabled
[3] caching userid removes the need for calling Patron->find each time
[4] subsequent changes in unit test
[5] cosmetic renames to move from session to daily basis (changed dev angle)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
First call going thru Koha::Patron takes about 0.0150 sec.
Subsequent calls only use caching and take about 0.0006 sec.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test Plan:
1) Apply this patch
2) Start a new session ( a private browser window works well )
3) Note the lastseen column in the borrowers table is updated
4) Browse a few pages, not the lastseen column is not updated again
5) Close the browser window and repeat steps 2-4
6) prove t/db_dependent/Auth.t
Signed-off-by: Charles Farmer <charles.farmer@inLibro.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
1. Item type defined at item level (item-level_itypes=1)
2. Mark an item type not for loan (itemtypes.notforloan=1)
3. Checkout an item using this item type (items.itype="BK" for instance)
=> Checkout is not blocked!
I suspect
commit 3953fdb921
Bug 19943: Remove itemtype vs itype confusion in CanBookBeIssued
to be the root of this issue.
One occurrence of $item->{itemtype} has not been replaced.
In this case it refers to the biblioitem->{itemtype} value whereas we want to use
$item->{itype}. So this issue does not happen if items.itype==biblioitem.itemtype
(just in case you are not reproducing the problem).
Test plan:
Make sure not for loan items cannot be checked out
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch fixes a regression after bug 14695.
This patch adds itemnumber and barcode as optional params in ReserveSlip used
by hold-transfer-slip.pl to generate HOLD_SLIP. This is for ReserveSlip to be
able to generate correct slips when items in multi-item holds are checked in.
Test plan:
1) activate a circulation rule with multi-item holds
2) Place two holds on same biblio for patron
3) for debugging, either use browser console to observe POST request and responses
or use info from reserves, e.g. reserve_id in the HOLD_SLIP
4) checkin two items from same biblio on pickup branch
5) note that both holds are effectuated, but reserve_id is the same on both slips
6) also note that there is no itemnumber or barcode in the requests from returns.pl
7) Apply this patch
8) repeat 2-4
9) note that reserve_id is now different on the two slips
and/or:
Run tests:
t/db_dependent/Reserves/ReserveSlip.t
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Maksim Sen <maksim.sen@inlibro.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
