This patch enhances auto_renewals message, removes auto_renewals messaging preference when AutoRenewalNotices is not set to ‘preferences’ and uses that preference to send notices in automatic_renewals.pl script.
To test:
1. Apply patches
2. updatedatabase
3. make sure automatic renewals are allowed in circ rules, have a positive number of allowed renewals and a positive number for renewal period
4. Check AutoRenewalNotices preference
SUCCESS => AutoRenewalNotices has the value ‘cron’ (means that It keeps the usual behaviour)
5. Checkout two items for a patron, and set them as automatic renewal and set due date as your current yesterday
6. perl misc/cronjobs/automatic_renewals.pl -c -v
SUCCESS => items were renewed, but there is no message in message_queue table in mysql
7. Repeat step 5
8. perl misc/cronjobs/automatic_renewals.pl -c -s -v
SUCCESS => items were renewed, and there is one message per item in message_queue table in mysql
9. Change AutoRenewalNotices to ‘never’
10. Repeat step 5
11. perl misc/cronjobs/automatic_renewals.pl -c -s -v
SUCCESS => items were renewed, but there is no message in message_queue table in mysql, even with the -s switch
12. Check any patron’s category, and any detail page in staff or OPAC interface, and in any of them you should find Auto Renewals messaging preference
13. Change AutoRenewalNotices to ‘preferences’
14. Repeat step 12, but this time all of them shows the Auto Renewals messaging preference.
15. Repeat step 5 with a patron that has no messaging preference setted
16. perl misc/cronjobs/automatic_renewals.pl -c -s -v
SUCCESS => items were renewed, but there is no message in message_queue table in mysql, because patron didn’t choose to receive messages
17. Grab a category and modify auto renewals messaging preferences, and save
18. Create a new patron from that category.
SUCCESS => created patron has the same messaging preference for auto renewals
19. Grab that patron and change auto renewals messaging preference to email but not digest
20. Repeat step 5 for that last patron.
21. perl misc/cronjobs/automatic_renewals.pl -c -v
SUCCESS => Items were renewed, and there is a message for each item in message_queue table in mysql.
22. Change auto renewals messaging preference from the same patron and set to email and digest.
23. Repeat step 5.
24. perl misc/cronjobs/automatic_renewals.pl -c -v
SUCCESS => items where renewed, and now there is only one message in message_queue table with the details of both renewed items.
25. Check that any changes to a patron’s auto renewals messaging preference in staff is reflected in OPAC, and the other way arround too.
26. Sign off
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the "Auto renewals" messaging preference on intranet and OPAC, and adds digest feature to misc/cronjobs/automatic_renewals.pl script.
(Deprecated test plan. Please check the last patch)
To test:
1. apply patches
2. perl installer/data/mysql/updatedatabase.pl
3. make sure automatic renewals are allowed in circ rules, have a positive number of allowed renewals and a positive number for renewal period
4. go to patron categories in administration of staff interface and choose a category.
CHECK => in "Default messaging preferences for this patron category" has a "Auto renewals" row and has email and digest options checked
5. grab a patron and go to details page
CHECK => patron's messaging preferences has a "Auto renewals" row with email and digest options checked
6. some settings and save
7. go to opac with that same patron to "your messaging" option
CHECK => patron's messaging preferences has a "Auto renewals" row, and displays changes made in staff interface.
8. uncheck email and digest from "Auto renewals" row and save
9. check out an item for that patron, and set it as automatic renewal and set due date as your current yesterday
10. perl misc/cronjobs/automatic_renewals.pl -c --send-notices -v
SUCCESS => item was renewed, and in message_queue table there is no new message for the patron
11. update patrons messaging preferences and set email option of "Auto renewals" row as checked
12. repeat steps 9 and 10
SUCCESS => item was renewed, but in message_queue table there is a new message of type AUTO_RENEWALS
13. update patrons messaging preferences and set email and digest options of "Auto renewals" row as checked
14. repeat steps 9 and 10
CHECK => item was not renewed
15. run step 10 again, but add -d flag, like this:
perl misc/cronjobs/automatic_renewals.pl -c --send-notices -v -d
SUCCESS => item was renewed, and in message_queue table there is a new message of type AUTO_RENEWALS_DGST
16. Sign off
Signed-off-by: tgoat <tgoatley@gmail.com>
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Marti Fuerst <mfuerst@hmcpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Koha::Plugins and C4::Context where missing.
Try::Tiny was missing for try/catch.
Test plan :
1) Use a plugin using hook 'cronjob_nightly'
2) Run script : misc/cronjobs/plugins_nightly.pl
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch prevents koha-preferences to set other values than 1/0 to be
used for YesNo prefs
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It seems that we don't really need all this overhead.
YesNo must be a boolean and contain 1 or 0.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
JD Amended patch: Remove perlcritic error
"$d" is declared but not used at line 839, column 5. Unused variables clutter code and make it harder to read. (Severity: 3)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a start time, end time and elapsed times on the 'records
exported' lines to the verbose output of the rebuild_zebra.pl script.
Test plan
1/ Run rebuild_zebra.pl -a -b -v
2/ Note the new timestamps included on the verbose output
3/ Signoff
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We should remove all SQL queries that contain 0000-00-00 and finally
assume we do not longer have such value in our DB (for date type)
We already dealt with such values in previous update DB entries.
The 2 added by this one haven't been replaced already.
The code will now assume that either a valid date exist, or NULL/undef.
Test plan:
QA review is needed and test of the different places where code is
modified.
Not sure about the change from reports/issues_avg_stats.pl
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Same as Load, but for Dump.
Test plan:
Edit ES mappings, replace withdrawn's label with "withdrawn ✔️❤️ ★"
Export the mappings
perl misc/search_tools/export_elasticsearch_mappings.pl > admin/searchengine/elasticsearch/mappings.yaml
Reset mappings from the UI
=> Notice that the label is correct
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
From tht YAML pod:
"""
This module has been released to CPAN as YAML::Old, and soon YAML.pm will be changed to just be a frontend interface module for all the various Perl YAML implementation modules, including YAML::Old.
If you want robust and fast YAML processing using the normal Dump/Load API, please consider switching to YAML::XS. It is by far the best Perl module for YAML at this time. It requires that you have a C compiler, since it is written in C.
"""
See also
https://gitlab.com/koha-community/qa-test-tools/-/merge_requests/35
Test plan:
Try some place where YAML::XS is not used and confirm that it works
correctly
QA note: This patch removes some uses of YAML that were not useful
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch allows multiple --category_code <categorycode> in delete_patrons.pl
The t/db_dependent/Members.t test has 2 added testcases with multiple category_code.
To test:
1) Run the test: prove -l . -v t/db_dependent/Members.t
2) This requires records in the database with at least two category codes. For example PT and ST.
3) Run the script: delete_patrons.pl --category_code PT
4) Confirm the number of patrons that would have been deleted.
5) Run the script: delete_patrons.pl --category_code PT --category-code ST
6) Confirm the number of patrons that would have been deleted.
7) Sign Off
Sponsored-by: Lunds Universitetsbibliotek
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This feature is not used as far as we know and it's not known to work.
It's preferable to remove it.
Test plan:
Make sure the OpacGroupResults pref code is removed, as well as the
PazPar2 files and code.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The check-url.pl script has been deprecated since Koha 3.8 - this patch removes it.
If any users are still referencing that script in their cronjobs they will need to
update to the new script upon upgrade.
To test:
1 - verify the script is gone
2 - verify check-url-quick.pl works
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If the script misc/import_patrons.pl is run without "--confirm" it reports
that it is "running in dry-run mode" but it is not!
Test Plan:
1) Import a CSV of patrons using import_patrons.pm *without* the --confirm parameter
2) Note that it does actually import the patrons
3) Apply this patch
4) Note that this time the patrons are not actually imported
5) Import again with --confirm
6) Note that the patrons were actually imported this time!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test Plan:
1. Go to Administration
2. Go to System Preferences
3. Find 'delimiter' (note the name)
4. Apply patch
5. Repeat step 1 and 2
6. Find 'CSVDelimiter' (note the name)
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
*** WARNING: empty section in previous paragraph at line 28 in file misc/cronjobs/advance_notices.pl
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch removes the double ups in the perldoc of the above file,
deleting the less clear double ups. The missing "-c" in OPTIONS
appears to have been fixed in an earlier patch (it is there
already).
Task Plan:
1. Run perldoc misc/cronjobs/advance_notices.pl in the terminal. Note
the double ups of NAME, SYNOPSIS, and DESCRIPTION
2. Apply the patch
3. Run the command again. The double ups should be gone, with the more
clear version of each of NAME, SYNOPSIS, and DESCRIPTION remaining.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test Plan:
1. Go to Administration
2. Go to System Preferences
3. Find 'opaclanguages' (note the lack of capitalisation)
4. Apply patch
5. Repeat step 1 and 2
6. Find 'OPACLanguages' (note the use of capitalisation)
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 23290 explicitly disabled entity expansion during XML parsing for security reasons.
However, many XSLTs define the following entity:
<!ENTITY nbsp " " >
They don't use the entity  , but its presence could lead to confusion.
Signed-off-by: Eden Bacani <eden.bacani@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Update script to use Koha::Logger to capture method failures.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This script simply iterates through installed plugins that impliment a
cronjob_nightly method and runs said method.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This script ensure that no sysprefs have been changed directly in the database and/or
that the cache has not become corrupted. We have occasionally seen this happen on production sites
To test:
1 - In the staff interface go to Administration
2 - Search for system preference 'IntranetUserJS'
3 - Add content to the syspref:
console.log('Hi!');
4 - On the command line launch mysql
sudo koha-mysql kohadev
5 - Alter the syspref directly
UPDATE systempreferences SET value = "console.log('Bye!');" WHERE variable = 'IntranetUserJS';
6 - run the script
perl misc/maintenance/check_syspref_cache.pl
7 - You are warned about the altered system preference
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch removes code that prevents fines from being update on holidays.
The fines are already being calculated, and that takes the calendar into account if
needed, so fines won't be assessed on holidays if they shouldn't.
To test:
1 - set finesCalendar to 'ignore'
2 - Checkout an item due yesterday
3 - Ensure circ rules have a fine amount set
4 - Make today a holiday
5 - run fines.pl
6 - No fine assessed
7 - Apply patch
8 - run fines.pl
9 - Fine assessed!
10 - set finesCalendar to 'use'
11 - checkout an item, due yesterday
12 - run fines.pl
13 - no fine assessed
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
One last instance of ModBiblioMarc in bulkmarcimport still passed the
frameworkcode.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Tested with :
For a framework (not the default) :
Creation of a biblio record
Edition of this biblio record
Creation of an item of this record
Creation of an item of this record
./misc/batchRepairMissingBiblionumbers.pl OK
prove t/db_dependent/Biblio/ModBiblioMarc.t OK
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1 - Check out an over due to a patron
2 - Set overdue triggers to a trigger less than number of days overdue
3 - Make sure the patron has no email
4 - Set content of ODUE notice to:
[%# Comment will not print %]
5 - perl misc/cronjobs/overdue_notices.pl
6 - Check the message queue
7 - There is a notice sent to the library:
"These messages were not sent directly to the patrons."
With no messages
8 - Apply patch
9 - Repeat
10 - No new message generated
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To prevent
DBD::mysql::db begin_work failed: Already in a transaction at /usr/share/perl5/DBIx/Class/Storage/DBI.pm line 1588, <GEN45> line 1.
Test plan:
1 - Export more than 100 records
2 - Use bulkmarcimport (with -commit=10) to import them
perl misc/migration_tools/bulkmarcimport.pl -b -file testbmi.xml -v -m=MARCXML --commit=10
3 - Modify a record to make the import fail (for instance having a too long
lccn)
4 - Use bulkmarcimport (with -commit=10) to import them
perl misc/migration_tools/bulkmarcimport.pl -b -file testbmi.xml -v -m=MARCXML --commit=10
5 - Notice that the import stops but that the imported record are imported (apart from the last batch of 10)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
MySQL 5.7 does not allow queries using 0000-00-00
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The SQL code was duplicated, I combine them here
frombranch needs to take input
switch owning to frombranch in second script
initialize hash as empty list, not a reference
add a newline after printed output if not mailing notices
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
As discussed, this patch updates the --owning parameter to more clearly
represent it's function.
--owning boolean => --frombranch=item-homebranch|item-issuebranch
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch fixes a perlcritic issue and also replaces tabs with four
spaces where appropriate.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The provided patch adds the following functionality:
* Add --owning to both advance_notice.pl and overdue_notice.pl
* Add --library to advance_notice.pl like the way overdue_notice.pl already works
When specifying "--owning" both scripts will use items.homebranch instead of
issues.branchcode to determine sending library.
For advance_notice.pl this affects non-digest DUE and PREDUE, but not digest notices.
To test:
1. Have a patron who wants advance notices as email with 2 days in advance (not digest)
2. Have the first overdue date set 3 days past due date
3. Have issue for that patron where date_due is 2 days away where the item homebranch differs from the issuing branch
4. Have issue for that patron where date_due is 3 days old
5. Run advance_notices.pl without --owning
6. Run overdue_notices.pl without --owning
7. Confirm that two messages were created for that patron with the sender being the issuing branch
8. Delete messages or create two more issues according to (3) and (4)
9. Run advance_notices.pl with --owning
10. Run overdue_notices.pl with --owning
11. Confirm that the two messages created has the item homebranch as sender
Extra feature for advance_notices.pl is that it adds "--library" the same way overdue_notices.pl has.
Adding variants of that flag in steps (5) and (9) above can confirm this option as well.
Sponsored-by: Gothenburg University Library
Signed-off-by: Björn Nylén <bjorn.nylen@ub.lu.se>
Signed-off-by: Timothy Alexis Vass <timothy_alexis.vass@ub.lu.se>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
misc/cronjobs/cleanup_database.pl provides some database cleanup.
This patch adds cleanup for messages table.
Test plan :
- Count messages : select count(*),date(message_date) from messages group by date(message_date);
- Run cleanup : misc/cronjobs/cleanup_database.pl -v --confirm --messages 365
- Recount messages
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
-library <branchname> only deal with overdues from this library (repeatable : several libraries can be given)
Should be <branchcode>
Help text should also be proper sentences.
To test:
0) Run misc/cronjobs/overdue_notices.pl -h
1) Check that the text is now:
-library <branchcode> Only deal with overdues from this library.
2) Check that the rest of the help text are proper sentences,
with leading capital letter and punctuation.
3) Sign off.
Sponsored-by: Lunds Universitetsbibliotek
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When multithreaded indexing is used, the commit size for children are spread
out resulting in them being of type float. When records are processed and the
commit counter decreased it may then never reach *exactly* 0. This means records
are never commited. This patch makes sure the counter is an integer to avoid the
problem.
To test you must find a set of circumstances that causes the issue. For me:
1. Run: ./rebuild_elasticsearch -v -b -p 2 -c 400
2. Note that only one process is logging "Committing xxx records..."
3. Kill processes.
4. Apply patch.
5. Repeat 1
6. Note that both processes are logging "Committing xxx records..."
Sponsored-by: Lund University Library
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This script checks that an authority is not being used before deleting it.
We do not need to check biblios for the authority id as we have already verified it is unused.
TO test:
1 - Reset db to koha test database
2 - perl misc/migration_tools/remove_unused_authorities.pl -t
3 - Note a number of unsued authorities
4 - perl misc/migration_tools/remove_unused_authorities.pl -c
5 - Note authorities are removed
6 - Reset db
7 - Apply patch
8 - perl misc/migration_tools/remove_unused_authorities.pl -t
9 - Note results are the same
10 - perl misc/migration_tools/remove_unused_authorities.pl -c
11 - Note results are the same
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The merging of Bug 23051 has added a paramter that can be passed to
C4::AddRenewal. This bug does also, so the offset of this bug's new
paramter was wrong. This patch fixes it.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds support for unseen renewals.
Here we retrofit knowledge of unseen renewals and add the display of unseen
renewal counts and warnings, in addition to adding the ability to
specify a renewal as being "unseen".
The functionality added here is goverened by the UnseenRenewals syspref.
Signed-off-by: Sally Healey <sally.Healey@cheshirewestandchester.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
misc/translator/translate was doing three different things:
- extract translatable strings
- create or update PO files
- install translated templates
This patch separates responsibilities by moving the string extraction
code into several 'xgettext-like' scripts and adds gulp tasks to
automate string extraction and PO files update
This has several benefits:
- gulp runs tasks in parallel, so it's a lot faster (updating all PO
files is at least 10 times faster with my 4-cores CPU)
- there is no need for $KOHA_CONF to be defined
LangInstaller.pm relied on $KOHA_CONF to get the different paths
needed. I'm not sure why, since string extraction and PO update should
work on source files, not installed files
- string extraction code can be more easily tested
This patch also brings a couple of fixes and improvements:
- TT string extraction (strings wrapped in [% t(...) %]) was done with
Template::Parser and PPI, which was extremely slow, and had some
problems (see bug 24797).
This is now done with Locale::XGettext::TT2 (new dependency) which is
a lot faster, and fixes bug 24797
- Fix header in 4 PO files
For backward compatibility, 'create' and 'update' commands of
misc/translator/translate can still be used and will execute the
corresponding gulp task
Test plan:
1. Run `yarn install` and install Locale::XGettext::TT2
2. Run `gulp po:update`
3. Verify the contents of updated PO files
4. Run `cd misc/translator && ./translate install <lang>`
5. Verify that all (templates, sysprefs, xslt, installer files) is
correctly translated
6. Run `gulp po:create --lang <lang>` and verify that it created all PO
files for that language
7. Run `prove t/misc/translator`
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Need to install yarn & gulp, no errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch moves the CatalogModuleRelink lookup outside the loop to
improve performance (especially for large databases), and includes a
tester friendly test plan.
Test plan:
0. Using koha-testing-docker
1. koha-shell -c "./misc/link_bibs_to_authorities.pl -l --test" kohadev
2. Note 436 bibs checked, 1315 headings linked, 676 headings unlinked
3. koha-shell -c "./misc/link_bibs_to_authorities.pl -l --test -g 700" kohadev
4. Note 436 bibs checked, 248 headings linked, 111 headings unlinked
5. Note output appear to all be names (rather than subjects or other authorities)
6. Note also that the 2nd run with -g 700 is almost 2x faster than without
Signed-off-by: Andreas Roussos <a.roussos@dataly.gr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When running link_bibs_to_authorities.pl, it could be useful to have
the ability to specify which MARC field the script should operate on.
For example, when you have a catalog where most links are in place,
and you don't want the script to process every MARC field but rather
limit it to a specific MARC field (e.g. 700) because you've observed
that there are many missing links for that particular MARC field.
This patch provides that enhancement.
Test plan:
1) Run the script as follows (preferably in a test DB):
time link_bibs_to_authorities.pl -v -l --test
... and notice how long it takes to complete.
2) Apply the patch.
3) Run the script again, this time providing the MARC field to work on:
time link_bibs_to_authorities.pl -v -l --test -g=700
... and, again, notice how long it takes to complete.
The 2nd run should run faster than the 1st one.
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
While the ES index is incremental and provides results as it commits, we currently index from the oldest records to the newest.
This patch provides the option to go the other direction
To test:
1 - Have ES setup and running for Koha
2 - perl misc/search_tools/rebuild_elasticsearch.pl -v -v -b
3 - Note the biblios index from number 1 the end
4 - perl misc/search_tools/rebuild_elasticsearch.pl -v -v -a
5 - Notice the same
6 - Apply patch
7 - perl misc/search_tools/rebuild_elasticsearch.pl -v -v -b
8 - Still in ascending order
9 - perl misc/search_tools/rebuild_elasticsearch.pl -v -v -b --desc
10 - Now records index in descending order
11 - perl misc/search_tools/rebuild_elasticsearch.pl -v -v -a
12 - Still ascending
13 - perl misc/search_tools/rebuild_elasticsearch.pl -v -v -a --desc
14 - Now descending
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
JD amended patch: fix typo "inde" vs "index" and add commit body
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the --reason option to cancel_expired_holds which allows
the library to optionally set a reason for cancellation when running the
cronjob. This will prompt the HOLD_CANCELLED notice to be sent to the
patron.
To test:
1/ Ensure the unit tests continue to pass after the patch
(t/db_dependent/Reserves/CancelExpiredReserves.t)
Also:
1 - Add an expired hold for a patron:
INSERT INTO RESERVES (borrowernumber, biblionumber, expirationdate, found,branchcode,itemnumber) VALUES (5,5,'2020-01-01','W','CPL',983);
2 - Set ExpireReservesMaxPickUpDelay to Allow
3 - Run the cronjob:
perl misc/cronjobs/hold/cancel_expired_holds.pl --reason EXPIRED
4 - Visit the patron's notices tab
5 - Confirm they have been sent a cancellation notice
Signed-off-by: Lisette Scheer <lisettes@latahlibrary.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
From its inception, phone notices via Talking Tech have not behaved like
other notices. Instead of reading notices generated by Koha, the Talking
Tech scripts largely generate their own notices.
We would like to pave the way to having "generic" phone notices that can
be processed by plugins to support arbitrary telephony vendors ( we will
be targeting Twilio initially ).
To that end, it seems sensible to begin by changing the messaage
transport type for Talking Tech from 'phone' to 'itiva' to
highlight its specificity and difference from standard message
transports.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Restart all the things!
4) Test Talking Tech outbound script
5) Note no changes in functionality
Signed-off-by: Christopher Zorn <Christofer.Zorn@ajaxlibrary.ca>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
JD amended patch: remove uneeded indentation change in sample_notices_message_transports.sql
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Script misc/search_tools/export_elasticsearch_mappings.pl allows to export current search engine configuration into a YAML file.
This export should use UTF-8 encoding, like other exports.
Test plan :
1) Go to Administration > Search engine configuration (Elasticsearch)
2) Edit a field label to use a diacrtic, for example local-number => Numéro
3) Save
4) Edit file etc/koha-conf.xml to enable 'elasticsearch_index_mappings'
5) Export mappings to file via misc/search_tools/export_elasticsearch_mappings.pl -t $MARCFLAVOUR
6) Reset memcached and plack
7) Back to Administration > Search engine configuration (Elasticsearch)
8) Click on 'Reset Mappings' and accept
9) Look at field 'local-number'
=> Without patch diacritic 'é' is broken
10) You may try with an emoji B-)
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch sets the UTF8 encoding for output of overdue_notices.pl when
outputting to txt.
To test:
0/ Check out an item with due date yesterday (use specify due date)
1/ Create ODUE text with utf8 encoded characters, chinese characters, umlauts etc
<url>/cgi-bin/koha/tools/letter.pl?op=add_form&module=circulation&code=ODUE
2/ Run
perl overdue_notices.pl -text ./
3/ Verify encoding in the generated text file is incorrect
4/ Apply patch and repeat 2/
3/ Confirm text now inludes properly encoded characters
Sponsored-by: Styrian State Library
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
With German umlauts on my system the editor still showed the
characters correctly (probably guessing the right encoding).
Using Chinese made the problem visible.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1 - Enable plugins in the koha-conf
2 - Install the kitchen sink plugin
3 - Your staff client should be orange now :-)
4 - edit the plugin module
/var/lib/koha/kohadev/plugins/Koha/Plugin/Com/ByWaterSolutions/KitchenSink.pm
5 - Add a line to break compilation, like:
this won't compile
6 - Restart all
7 - Your koha is now broken
8 - kshell
9 - perl misc/devel/install_plugins.pl
10 - Restart all
11 - Koha remains broken
12 - Apply patch
13 - kshell
14 - perl misc/devel/install_plugins.pl
15 - Koha now works!
16 - Koha is not orange because the plugin methods are removed
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This cannot be:
/queue/$namespace/$job_type
I got: '/koha_kohadev/batch_biblio_record_modification' is not a valid queue destination
So keeping the dash in $namespace-$job_type
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 22417: Add a note about the existence of the DB row
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 22417: (follow-up) Fix the batch authority tool
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This script gets adapted to use the new Koha::Email syntax and SMTP
transport.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adapts controller scripts that used sendmail. Also the syntax
for Koha::Email has changed and this patch adapts it.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The script did not allow to find empty fields or use wildcards
With this new option we will now have the ability to filter patrons by
some of their attributes.
Test plan:
1 - Run the script with no parameters and verify the help explains the parameters
2 - Try the script with one or more --where parameters, like:
--where "firstname='koha'"
3 - Test null values
--where "firstname IS NULL"
4 - Test like values with wildcards
--where "firstname LIKE '%a%'
5 - Test like with the word null to find fields containing the word rather than being unset
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 19014 altered CanBookBeRenewed to return (auto_)too_soon over on_reserve
For cron purposes this is the correct behaviour.
For display purposes we wish to see on_reserve over too_soon
This patchset adds a switch to 'CanBookBeRenewed' to alter the priority of these statuses
To test:
1 - set NoRenewalBeforePrecision to date only
2 - set a circ rule to auto-renewal=yes, no renewal before=0, checkout period to 7 days
3 - check item out
4 - confirm item shows Scheduled For Automatic Renewal in issues table
5 - place a hold on the item for another patron
6 - reload issues table for patron 1, confirm checkout still shows "scheduled for automatic renewal" rather than "on hold"
7 - change No Renewal Before value to 7
8 - reload issues table for patron 1, confirm checkout now shows "on hold"
9 - Apply patch
10 - restart_all
11 - Reload the issues table - confirm 'on_hold' still shows
12 - Change No Renewal Before to 0
13 - Refresh issues table, still shows 'On hold'
14 - perl misc/cronjobs/automatic_renewals.pl -v
15 - Result shows 'auto_too_soon'
16 - prove -v t/db_dependent/Circulation.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch removes the use of AddAuthority with a non-empty
authid argument, since that triggers an update rather than an insert.
In practice, the update also fails, but the error isn't raised,
as the database connection doesn't have RaiseError set.
Test plan:
1) Do not apply patch
2) Try to bulkmarcimport an authority file with a 001
3) Observe that the script reports success but no authority is added
4) Apply the path
5) Try to bulkmarcimport an authority file with a 001
6) Observe that the script reports success and the authority is added
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
bulkmarcimport.pl displays a small typo when a MARC modification
template is being used: "modofication".
This patch fixes that.
Test plan: apply the patch, and confirm the script no longer
displays the typo.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This script does not pass the patron's preferred lang for notices.
Test plan:
Enable TranslateNotices
Create a patron with a preferred lang for notices != default
Translate ODUE for this language
Setup the overdue notices for this patron's category
Check an item out for this patron (select the correct due date to
trigger the notice)
Run the script overdue_notices.pl
Check the message_queue table and confirm that the notice enqueued is
translated
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 23871 added check for 'title exists' to `search_for_data_inconsistencies.pl`.
There is a typo in DBIx query to create or : hashref instead of arrayref.
Test plan :
1) Change title of biblio record XXX in SQL :
UPDATE biblio SET title = '' WHERE biblionumber=XXX
2) Change title of biblio record YYY in SQL :
UPDATE biblio SET title = NULL WHERE biblionumber=YYY
3) Run misc/maintenance/search_for_data_inconsistencies.pl
4) Check you see both records
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
.pm must not have -x
.t must have -x
.pl must have -x
Test plan:
Apply only the first patch, run the tests and confirm that the failures
make sense
Apply this patch and confirm that the test now returns green
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch:
* reverts changes on misc/admin/set_password.pl
* makes category param mandatory for AuthUtils::is_valid_password and AuthUtils::generate_password
* changes onboarding.pl to set category param in AuthUtils::is_valid_password
* Completes t/db_dependent/AuthUtils.t and drops t/AuthUtils.t
* Removes offending <input type="number"/> and replaces it by <input type="text" inputmode="numeric" pattern="[0-9]*"/>
https://bugs.koha-community.org/show_bug.cgi?id=23826
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the capability to override minPasswordLenth and RequireStrongPassword settings by category
To test:
1. koha-shell kohadev
2. koha-mysql kohadev
3. drop database koha_kohadev;
4. create database koha_kohadev;
5. go to admin page and start webinstaller. There continue the steps until onboarding.
6. reach step 3 of onboarding and create a new administrator patron
CHECH => Password control woks as normal (Minimum length 3 and strong required)
7. finish Koha installation and enter admin with your new administrator
8. set minPasswordLength to 3 and RequireStrongPassword to “Don’t require”
9. Create a new category (CAT2 from now on.. CAT1 is the category you made in onboarding process) and set minimum password length to 8 and require strong password
10. Create two new patrons, one with CAT1(patron1) and one with CAT2 (patron2)
CHECK => In both cases, try different combinations of length and strength. For patron1 the only requirement is to have 3 letters, but for patron2 the minimum length will be 8 and will require strong password.
CHECK => Try changing patron category before saving. Password requirements will change with category change.
11. Edit CAT1 and set minimum password length to 5
12. Go to patron1 details page, and change password.
CHECH => Now password minimum length is 5, but still it doesn’t require strong password
13. Edit CAT1, leave blank minimum password length and set require strong password to yes.
14. Go to patron1 details page, and change password.
CHECH => Password minimum length is back to 3, but now strong password is required
15. Set minimum password length in CAT2 to 12.
16. Go to patron2 details page, and click to fill a random generated password
CHECK => generated password should be 12 characters length
17. Set PatronSelfRegistration to Allow in admin settings
18. Go to OPAC and fill self registration from.
CHECK => Play with patron category. For each change in category, password requirements are modified.
CHECK => Set CAT1 as patron category, set ‘aA1’ as password (or another valid password for CAT1) and before hitting submit button, change to CAT2. Form should enter invalid state, and CAT2 password requirements should be displayed as error in password input.
19. Create a patron for CAT1 and another for CAT2, leaving password blank
CHECK => For CAT1’s patron, generated password length is 8 (minimum length for generated passwords), but for CAT2’s patron should be 12
20. In admin set PatronSelfRegistrationVerifyByEmail to require
21. Fill self registration form again with CAT2 as category
CHECK => Password requirements works as previous case.
22. Leave password blank and click submit
23. select * from message_queue;
24. Copy the link in the message and paste it in OPAC
CHECH => Generated password is 12 characters long. (Copy user id for next steps)
25. In admin set OpacResetPassword to Allow
26. Go back to OPAC, reload and click on “Forgot password?” link
27. Paste user id and click submit
28. Repeat steps 23 and 24
CHECK => Info message says “Your password must contain at least 12 characters, including UPPERCASE, lowercase and numbers.”
CHECK => enter an invalid password and you’ll get the same message in warning.
29. Login OPAC with the last user and your newly created password
30. Go to “Change your password” option
CHECK => Info message says “Your password must contain at least 12 characters, including UPPERCASE, lowercase and numbers.”
CHECK => enter an invalid password and you’ll get the same message in below “New password” input.
31. prove t/db_dependent/AuthUtils.t t/db_dependent/Koha/Patron/Category.t
32. Sign off
Sponsored-by: Northeast Kansas Library - NEKLS
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Some library would like to delay the importing of invoices until
a time of their choosing. The invoices should be imported into
the database as they do now, but the invoice processing should
be skipped. Instead, any invoice file with a status of 'new'
should have an 'Import' button to process the invoice.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Enable the new syspref EdifactInvoiceImport
4) Run the edi cronjob to import a new invoice file
5) View EDI messages table at /acqui/edifactmsgs.pl
6) Note the invoice files is not processes, and retains the status of 'new'
7) Use the 'import' button to process the invoice
8) Note the invoice is now marked 'received' and the 'import' button is gone
9) Verify the invoice was actually processes
Signed-off-by: Debi Stears <DDStears@washoecounty.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If you define the address we use it, if not we fallback,
it's not really a redirect, and that just makes the name longer.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
1. Set no email addresses in patron record then checkout
items to the patron making the due date in the past
2. Visit patron's home library page: Administration > Libraries
Set a branch email and in global system preferences observe there is no syspref
named RedirectAddressForFailedOverdueNotices
3. Manually run overdue_notices.pl
4. Check the message_queue database table and observe there is a
print overdue notice and a email notice with to_address of the
branch email address
5. Apply patch
6. Run database update:
cd installer/data/mysql
sudo koha-shell <instance_name>
./updatedb.pl
7. Confirm there is a new system preference named:
RedirectAddressForFailedOverdueNotices
Give it a different email address to that in the branch email.
7. Repeat steps 1,3,4 and observe that the failed overdue notices have been
sent to the email defined in RedirectAddressForFailedOverdueNotices
Sponsored-By: Catalyst IT
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This takes care of more occurences of staff client and changes it to
staff interface, including in code comments.
To test:
- I think in this case careful code review is what we look for.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When using misc/export_records.pl --deleted_barcodes if barcode is NULL you get warn :
Use of uninitialized value in say at /home/koha/src/misc/export_records.pl
Also exporting barcode if empty string makes no sense.
Test plan :
1) Delete an item with barcode = NULL
2) Run : misc/export_records.pl --date=`date +%d/%m/%Y` --deleted_barcodes --filename=/tmp/deleted_barcodes
3) Check you se no warn "Use of uninitialized value in say ..."
4) Delete an item with barcode = ''
5) Run 2)
6) Check there is no empty line in /tmp/deleted_barcodes
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When lost items are not marked as returned, they are still subject to
the long overdue cron, so an item that has already been marked Lost may
automatically roll to Long Overdue. In some cases, a library may not
want that lost value to change. This becomes especially important with
the introduction of Claims Returned, which uses a variety of lost.
Test Plan:
1) Set up a long overdue item that would be moved to lost by longoverdue.pl
2) Run the cronjob with the new --skip-lost-value option
3) Note the item is not altered
4) Include that value in the new system preference DefaultLongOverdueSkipLostStatuses
5) Run the cronjob *without* the new option
6) Note the item is not altered
7) Run the cronjob again with the new command line option, but set it to
a different value so the item will be affected
8) Note the item is altered as it would have been before this patch was
applied
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Rebecca Coert <rcoert@arlingtonva.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Also fix code style with perltidy
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The script is very simple, it just calls GetPreparedLetter with
arguments given on command line and print the resulting letter content
Usage example:
misc/devel/get-prepared-letter.pl --module circulation \
--letter_code ODUE --tables '{"borrowers":1,"branches":"CPL"}' \
--repeat '{"item":[{"biblio":1,"items":1}]}' \
--loops '{"overdues":[1]}'
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works for the example and other cases.
Correct option is 'letter-code', with dash, not underscore.
An usage message would be nice.
No errors
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
JD amended patch: tidy the new file and rename it matching the other
scripts' names in this directory
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The permissions for this were -rw-r--r-- and need to be -rwxr-xr-x.
To test:
- Verify the file permissions before and after applying the patch.
Signed-off-by: Didier Gautheron <didier.gautheron@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
