This patch fixes the 'cancel selected recalls' button on the biblio
details Recalls page, and ensures a correct cancellation reason is
logged when cancelling a recall in transit.
To test:
1) Ensure UseRecalls is enabled and relevant recalls circulation rules
are set
2) Check out Item A to Patron B
3) Log into OPAC as Patron A
4) Search for Item A and place a recall
5) Go back to the staff interface and search for Item A. When viewing
the biblio record, go to the recalls tab.
6) Check the checkbox for your recall, and click the button to cancel
selected recalls.
7) Confirm your recall is successfully removed and you're redirected to
the correct recalls page for this biblio.
8) Go back to the OPAC and place a recall again. This time set the
pickup location to a different library, one that you're not logged in at
9) Back in the staff interface, check in Item A and confirm the recall
and transfer
10) Go to Circulation -> Recalls to pull. Your recall should show here.
Click the button to cancel the recall and revert the transfer
11) Confirm the recall has been cancelled
12) Go to Reports and create a new SQL report with the following SQL:
select * from branchtransfers b join items i on
b.itemnumber=i.itemnumber where i.barcode = <<barcode>>
13) Run the report and paste the barcode of Item A in the field
14) Confirm there are two rows returned - the transfer triggered when
the recall was confirmed, with a reason of 'Recall' and a cancellation
reason of 'RecallCancellation, and the transfer sending the item back
home when the recall was cancelled, with a reason of
'RecallCancellation'.
Sponsored-by: Catalyst IT
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The introduction of _checkHoldPolicy has made this check superfluous.
Test plan stolen/updated from 27068
To test:
1) In library groups add a root group and check it as hold group.
2) Add two libraries to the group
3) In circulation and fines rules, in 'Default checkout, hold and return
policy', in Hold pickup library match change the value to 'From patron's hold group'
4) Place a hold from a patron whose home library is from the group
4.5) perl misc/cronjobs/holds/build_holdsqueue.pl
5) Go to /cgi-bin/koha/circ/view_holdsqueue.pl
6) Select the holding branch of the item with a hold
7) observe no results
8) Apply Patch
9) Repeat 5-6
10) The item should come up on the holds queue results
11) Place a hold on an item where 1 record has 2 copies, 1 in the hold group, 1 not.
12) Run the HoldQueue for the library not in the group and make sure the hold isn't showing.
13) Turn on transportation cost matrix and set costs for the libraries within the group.
14) Place a hold for a patron where multiple copies are on the bib.
15) Check both branch's hold queue for the item, it should only show on the lower cost branch's list if both copies are available.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch converts the table of plugins to a DataTable so that
it will have dynamic sorting, export options, and the quick search
field at the top of the table.
To test you should have more than one plugin installed.
- Apply the patch and go to Administration -> Manage plugins.
- The table should be styled as a DataTable, with the first column
sorted by default.
- At the top of the table you should see the number of entries,
a quick search form, and an export button.
- Confirm that the quick search form works to filter plugins by
name, description, author, etc.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch refines the JavaScript which is run when the "Select all"
or "Clear all" controls are clicked. The script now checks to see
whether the checkbox is checked before triggering the change function.
To test, apply the patch and perform a patron search in the staff
interface which will return multiple results.
- After the patron search results are displayed, test the "Select
all" control. The visible search results should all be checked,
and the "Patrons selected" counter at the top should be
incremented correctly.
- Clicking the "Select all" control again should have no effect.
The "Patrons selected" counter should not increment again.
- Test the "Clear all" control to confirm that checkboxes are
unchecked and the counter updates correctly.
- Test with multiple pages of patron search results to confirm
that the controls work correctly on any page of results..
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds an explicit "width: 100%" to tables which are contained
within a #searchresults <div>. The change affects staff interface
catalog search results and these other pages with the same markup:
- Advanced MARC editor search results
- Holds to pull
- Patron search results
To test, apply the patch and rebuild the staff interface CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client)
- Test the catalog search results and other affected pages to confirm
that the tables affected take up the full width of the page.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the staff interface lists page to use Bootstrap tabs
instead of jQueryUI.
To test, apply the patch and go to Lists.
- Test that the public and private tabs work correctly.
- Test that other lists functionality still works as expected.
- Confirm that adding the "public" URL parameter works to trigger the
"Public lists" tab by default:
/cgi-bin/koha/virtualshelves/shelves.pl?public=1
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the tools sidebar so that it better matches the tools
home page:
- Sidebar menu should say Tags instead of Tag moderation
- Barcode image generator and Quick spine label creator links
reversed.
- Upload any file -> Uploads
- Cash management section is added to sidebar using brief text
This patch does not make changes to the way plugins are displayed in the
sidebar. In order for the sidebar to correctly display according to the
presence of tool plugins I think some kind of global variable would need
to be set.
Signed-off-by: Anke Bruns <anke.bruns@gwdg.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds comments to the templates to highlight the markup
structure.
This patch should have no effect on the pages' appearance or
functionality.
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch performs general template cleanup to the tools-home and
tools-menu templates: Make indentation consistent, replace tabs with
spaces, fix invalid HTML.
To test, apply the patch and go to Tools. The page should look correct,
with no visible changes from before the patch.
Go to any tools page which shows the left-hand sidebar, e.g. Patron
lists, Batch item deletion, Inventory, etc. The menu should look
correct.
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds comments to the template to highlight the markup
structure.
This patch should have no effect on the page's appearance or
functionality.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch performs general template cleanup to the lists template:
Make indentation consistent, replace tabs with spaces, and trim trailing
whitespace.
To test, apply the patch and test all aspects of the lists pages,
including:
- Viewing the list of public and private lists.
- List of lists DataTable controls: Paging, filtering, sorting.
- Add, edit and delete lists.
- View list contents.
- Remove titles from a list.
- Place hold from a list.
- Add items to a list.
Use your preferred method for checking the differences between files
while ignoring whitespace. I use diff with the "-w" flag. The only
changes you see should be split lines.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
See comment36 and comment37. This needs more attention but
serves as a quick fix only.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1 - Set an item in transit and confirm the transfer
2 - View details page for biblio
3 - Item shows 'Available'
4 - Apply patch
5 - Restart_all, reload page
6 - Item appears in transit
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1. Install another language in the staff interface
1. in commandline: `cd misc/translator/; ./translate install xx-XX`
2. Check the box of the language in the 'language' system preference
and save
3. Refresh and you should be able to choose languages
2. Create an item type with a parent
1. Go to Administration > Item types
2. Create a new item type or modify an existing one, assigning a parent type (I created a 'Children's books' type and assigned 'Books' as its parent)
3. Create a circulation rule for the parent type (I created All/Books, with 10 checkouts allowed)
4. Create a circulation rule for All/All (I created All/All with 30 checkouts allowed)
5. In English, click on "Edit" next to the parent type rule (All/Books)
--> Note that the item type in the bottom row (the modifiable row) is changed to 'Books (All)'
6. Modify the number of checkouts allowed (e.g. 99)
--> The All/Books rule is modified
7. Switch the interface to the other language
8. Click on "Edit" next to the parent type rule (All/Books)
--> Note that the item type in the bottom row stays on 'All'
9. Modify the number of checkouts allowed (e.g. 88)
--> The All/All rule is modified
10. Apply the patch, translate again and refresh the page
11. Do step 8-9 again and notice it now behaves as it should
Signed-off-by: Emmanuel Bétemps <e.betemps@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Koha can use CurrencyFormat for displaying price amounts and should do
so consistently everywhere. Without this patch price and replacement cost
will always display as xx.xx independent of CurrencyFormat setting in
the table above the edit items form. This patch fixes the table display.
To test:
* Apply patch
* Search or create a record with multiple items
* Fill in some price and replacement costs
* Try different settings of the CurrencyFormat system preference
* The display in the item table above the edit/add form should display
according to the system preference
* Verify sorting works
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
No need to keep it.
Fixing a test description too.
Test plan:
Run t/db_dependent/Context.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In the patron account in the staff interface, all amounts in the
checkouts table should be formatted according to the CurrencyFormat
system preference setting.
To test:
* Edit some items, setting the replacement cost
* Make sure one of the item type is set to charge a rental charge
* Check out items
* Verify the checkouts table displays on both checkouts and details
tabs correctly
* Try different settings of CurrencyFormat and verify all amounts
display correctly
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the holding branch to the hold queue report.
It is added as hidden by default, when running per branch it is not needed
To test:
1 - Place some holds in your system
2 - perl misc/cronjobs/holds/build_holdsqueue.pl
3 - View the holds queue
4 - Note there is no 'Current library' column
5 - Apply patch
6 - Reload
7 - Note the column is not there
8 - Click column setting gear
9 - Check the column and confirm it appears
10 - Confirm the filter works
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1 - Create a report with a number of results that is not a multiple of 20
SELECT barcode FROM items
2 - Run the report
3 - Go to the final page
4 - Note report says 20 shown, but there are less
5 - Apply patch
6 - Reload and confirm correct number of shown is shown :-)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Sponsored-by: Lund University Library, Sweden
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Sponsored-by: Lund University Library, Sweden
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch allows subject headings from different thesaurus to co-exist in Koha.
Test plan:
1. Enable Elasticsearch as the search engine (SearchEngine system preference =
Elasticsearch) and reindex (koha-elasticsearch --rebuild -d -b -a kohadev).
2. Load sample authority records attached to the bug (in this case the
authorities.mrc file was saved in the koha directory - adjust file location as
appropriate):
misc/migration_tools/bulkmarcimport.pl -v -a -file authorities.mrc -insert
-c=MARC21
3. Load the sample bibliographic record attached to the bug:
misc/migration_tools/bulkmarcimport.pl -v -b -file biblios.mrc -insert
-c=MARC21
4. Search for ISBN 0704328623 and verify that the subject terms are not linked
to any authority records (if you hover over the link terms, all links should
look like ../cgi-bin/koha/catalogue/search.pl?q=su:"subjectterm" - none should
have any ?q=an:XXX (where XXX = authority record ids) in the link).
5. Apply the patches.
6. Reset the Elasticsearch mappings (Administration > Catalog > Search engine
configuration (Elasticsearch)).
7. Reindex: koha-elasticsearch --rebuild -d -b -a kohadev
8. Link bibliographic records to authority records:
misc/link_bibs_to_authorities.pl -v -l
9. Repeat the search in step 4 (or refresh the record details page) and verify
that the first three Feminism headings[1] are linked to an authority record
(should have ?q=an:XXX (where XXX = different authority record IDs for the
various feminism authority records linked to a specific thesaurus)).
10. Reindex: koha-elasticsearch --rebuild -d -b -a kohadev
[1] Links for subject terms for step 9 in order are (the authority ids may be
different depending on how ou are testing):
Subject(s:) Feminism | feminism | Feminism | Feminism | Idéhistoria |
Litteratur
http://127.0.0.1:8081/cgi-bin/koha/catalogue/search.pl?q=an:1709http://127.0.0.1:8081/cgi-bin/koha/catalogue/search.pl?q=an:1710http://127.0.0.1:8081/cgi-bin/koha/catalogue/search.pl?q=an:1708http://127.0.0.1:8081/cgi-bin/koha/catalogue/search.pl?q=su:"Feminism"
http://127.0.0.1:8081/cgi-bin/koha/catalogue/search.pl?q=su:"Idéhistoria"
http://127.0.0.1:8081/cgi-bin/koha/catalogue/search.pl?q=su:"Litteratur"
MARC info:
650 #7 - SUBJECT ADDED ENTRY--TOPICAL TERM
a Topical term or geographic name entry element Feminism
0 Authority record control number or standard number
https://id.kb.se/term/sao/Feminism
2 Source of heading or term sao
650 #7 - SUBJECT ADDED ENTRY--TOPICAL TERM
a Topical term or geographic name entry element feminism
2 Source of heading or term bnb
650 #0 - SUBJECT ADDED ENTRY--TOPICAL TERM
a Topical term or geographic name entry element Feminism
650 #4 - SUBJECT ADDED ENTRY--TOPICAL TERM
a Topical term or geographic name entry element Feminism
650 #4 - SUBJECT ADDED ENTRY--TOPICAL TERM
a Topical term or geographic name entry element Idéhistoria
650 #4 - SUBJECT ADDED ENTRY--TOPICAL TERM
a Topical term or geographic name entry element Litteratur
Note: The fourth Feminism term has second indicator 4 which means "Source
not specified". So this term is only a local term and does not belong to any
specific thesaurus and thus not linked. To specify a source of a term, the
second indicator must be set as 7. The source of heading is then specified in
subfield 2.
Sponsored-by: Lund University Library, Sweden
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds 040 $f to a new field Subject-heading-thesaurus-conventions authority index mapping.
To test:
1) Apply patch
2) Reindex using rebuild_elasticsearch.pl -r
If you don't have access to a terminal (in a sandbox for example)
2a) Go to Administration > Search engine configuration, click "Reset mappings" and confirm
2b) Then reindex
Sponsored-by: Lund University Library, Sweden
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Without this patch suggestion and OPACViewOthersSuggestions appeared
grouped with other preferences. This patch restores them as separate
entries under the new Suggestions heading.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Confirm all suggestion preferences are now grouped.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
-Apply patch and generate a quick spine label.
-Inscept the page and notice that the #spinelabel element should contain a new class which corresponds with that the of the logged in branch.
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The label creator can accept a list of either itemnumbers or item barcodes.
In the case that the list of composed of barcodes, those barcodes should be
passed though barcodedecode before the lookup is performed.
Test Plan:
1) Apply this patch
2) Download and install the Barcode Transformer plugin
https://github.com/bywatersolutions/koha-plugin-barcode-transformer/releases/
3) Go to the plugin configuration page, set the configuration to the example configuration from the same page
4) On the "New label batch" page of the Label creator,,
type in some valid barcodes, but prefix them with X and postfix them with Y, e.g. X123456Y
5) Submit the form
6) Note the items are added to the label batch!
JK: Remove unnecessary if $number check, barcodedecode already does this
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This adds a check for the preference OPACAcquisitionDetails and fetches
the active orders for the item if necessary
Additionally, we simply the check for biblio orders to use object methods
and remove code that stored order information in the item_info
To test:
1 - Enable preference: OPACAcquisitionDetails
2 - Create a basket with items created on order, add an order for a biblio, close the basket
3 - Create a second basket as above, add an order with multiple copies, leave basket open
4 - View biblio on opac
5 - You should see 1 item marked on order, and "1 items on order" below items table
6 - Close second basket
7 - Reload opac view, now 3 on order and in message
8 - Reopen first basket
9 - Reload opac view, now 2 on order and in message
JK: Remove unused @itemnumbers_on_order variable
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
marc_subfield_structure.kohafield can be NULL, but it can also be an
empty string. But in that case, Koha::Item::as_marc_field ignores them,
which means the resulting MARC::Field object has missing data.
This can produce a bug in OPAC ISBD view (and probably other places
where this method is used)
Test plan:
1. Edit the default biblio MARC framework for the item field: find or
create a subfield that is not linked to a DB column.
Save even if you made no changes to make sure that
marc_subfield_structure.kohafield is set to an empty string.
I'll use 995$Z as an example for the following steps.
2. Add the following to syspref OPACISBD:
#995|<br>Item:|{995Z}|
3. Create a biblio with an item and put a value into 995$Z
4. Go to the ISBD detail page for this record at OPAC. Confirm that the
value you entered in 995$Z is not visible
5. Apply patch and restart koha
6. Refresh the ISBD detail page. Confirm that the 995$Z is now visible.
7. Run `prove t/db_dependent/Koha/Item.t`
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Some libraries don't want to auto-cancel holds, but we should not remind
a patron about a hold which has expired.
To test:
1 - Place a hold for a patron
2 - Set it waiting
3 - Run the holds reminder script in the future
perl misc/cronjobs/holds/holds_reminder.pl -day 1 --date '2023-09-12' -v
4 - Note the holds would be reminded
5 - Set expirationdate for the hold less than today
UPDATE reserves SET expirationdate = DATE_SUB(CURDATE(), INTERVAL 1 DAY);
6 - Run the remidner cron again
7 - No holds trigger!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
TO test:
1. Apply patch
2. Find an item and add a materials specified note ( 952$3 ) to it.
3. Add this CSS to the IntranetUserCSS system preference:
background: red;
}
4. Now check-in the item in. The background of the materials specified note should now be red!
5. Hooray, sign off!
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Lisette Scheer <lisettePalouse+Koha@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch replaces the obsolete .on("hover") with .on("mouseenter
mouseleave"). This will allow the code to work again following the last
jQuery upgrade.
See Bug 20217 for discussion of the original implementation:
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=20217#c14
To test, apply the patch and go to the staff interface. Hover your mouse
over the "Search" link in the header menu. The adjacent dropdown menu
button should have its hover state triggered.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Subtest for testing nullability of host, syntax and encoding.
Test plan:
Run prove t/db_dependent/Koha/Z3950Servers.t.
(Note: you need strict mode to pass this test.)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
No real changes, just moving code and indentation.
Ground work for following patch.
Test plan:
To let the test pass, disable strict_mode in koha-conf.
Run perl t/db_dependent/Koha/Z3950Servers.t. Should pass now.
However, in strict mode or with prove, it should fail.
Run prove t/db_dependent/Koha/Z3950Servers.t. Failed?
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This is not a sync issue between structure and db revs.
It just seems a logical move.
Note that the interface for long does not allow these fields to be empty.
Test plan:
Run dbrev.
Add a new Z3950/SRU server. Verify if it works as expected.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch attempts to clarify the 'Shelving location' option in the
staff side dropdown, as it requires searching the shelving location code, not
the values. i.e. 'FIC' not 'Fiction'
This patch adds (code) to the option and adds a title, visible on hover
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
