This patch includes:
- the subroutines GetContract and GetContracts has been moved from C4::Acquisition.pm to C4::Contract.pm and adapted for a general use
- adaptation of acqui/basket.pl, acqui/basketheader.pl, acqui/neworderempty.pl, acqui/supplier.pl and admin/aqcontract.pl
- the unit tests for the module C4::Contract.pm
Test plan:
1) Apply the patch
2) Execute the unit tests by launching:
prove t/db_dependent/Contract.t t/Acquisition/ t/db_dependent/Acquisition/ t/db_dependent/Acquisition.t
3) The command has to be a success :
t/db_dependent/Contract.t ................................. ok
t/Acquisition/CanUserManageBasket.t ....................... ok
t/Acquisition/Invoice.t ................................... ok
t/db_dependent/Acquisition/GetBasketsInfosByBookseller.t .. ok
t/db_dependent/Acquisition/GetOrdersByBiblionumber.t ...... ok
t/db_dependent/Acquisition/Invoices.t ..................... ok
t/db_dependent/Acquisition/OrderFromSubscription.t ........ ok
t/db_dependent/Acquisition/TransferOrder.t ................ 1/11 # Transfering order to basket2
t/db_dependent/Acquisition/TransferOrder.t ................ ok
t/db_dependent/Acquisition/close_reopen_basket.t .......... ok
t/db_dependent/Acquisition.t .............................. ok
All tests successful.
Files=10, Tests=284, 15 wallclock secs ( 0.11 usr 0.02 sys + 12.88 cusr 0.77 csys = 13.78 CPU)
Result: PASS
4) Log on with a superlibrarian permission
5) Go on the page acqui/supplier.pl (Acquisitions > Button "New vendor")
6) Record a vendor with a nonzero "name"
7) Go on the page admin/aqcontract.pl (click on the "Contracts" item in the menu)
8) Click on the button "New" > "Contract" and record a new one
9) Verify the displayed data are correct about the contract
10) "Edit" the contract with different values and verify the data are updated
11) Click on "Delete" in order to delete the contract, verify the displayed data are correct but cancel the operation
12) Click on "New" > "Basket" and verify there is the created contract in field "Contract", then record a basket by selectioning the created contract
13) Verify the contract name displayed is correct
14) Record an active budget and a fund linked to this budget
15) Go on the new basket (Home > Acquisitions > Search the created vendor)
16) Click on "Add to basket" then "From a new (empty) record" and verify the displayed contract name is correct
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Tested with both patches applied.
Works as described following test plan, all points (I did 14 first)
All test pass
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Adding unit tests for the routines AddMessage, GetMessages, GetMessagesCount and DeleteMessage in t/db_dependent/Members.t
Adding unit tests for the routines GetPendingIssues and GetAllIssues in separate files : t/db_dependent/Members/GetPendingIssues.t and t/db_dependent/Members/GetAllIssues.t
The routine GetAllIssues has been modified because it does not test if the arguments was defined :
- the borrowernumber argument is required
- if the order argument is not given, it takes a value by default : 'date_due desc'
- the limit argument is optional
Test plan:
1/ Apply the patch
2/ Execute : prove t/db_dependent/Members.t t/db_dependent/Members/GetAllIssues.t t/db_dependent/Members/GetPendingIssues.t
3/ The result has to be a success without error or warning :
t/db_dependent/Members.t ................... ok
t/db_dependent/Members/GetAllIssues.t ...... ok
t/db_dependent/Members/GetPendingIssues.t .. ok
All tests successful.
Files=3, Tests=83, 5 wallclock secs ( 0.06 usr 0.01 sys + 4.68 cusr 0.26 csys = 5.01 CPU)
Result: PASS
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch: perltidy on t/db_dependent/Members/*
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This followup replaces $params with %$params in keys function
It also fixes some wording
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch
- refactors C4::Stats::UpdateStats (it now takes a hashref as unique parameter, instead of a list of parameters)
- add UT for it
- change the calls made to this sub in C4::Accounts and C4::Circulation
Additionnaly it also
- adds POD to C4::Stats::TotalPaid
- adds some comments to C4::Stats::TotalPaid (I think I found some errors in it)
To test :
1. run "prove t/db_dependant/Stats.t -v"
2. make some circulation operations (checkout, checkin, renew, localuse)
check the operations are rightly recorded in Statistics table (with a SQL query like "SELECT * FROM statistics WHERE datetime LIKE "2013-11-15%", if you run your test on the 15th november)
3. make some fine payments operations (writeoff, payment)
check the operations are rightly recorded in Statistics table (with a SQL query like "SELECT * FROM statistics WHERE datetime LIKE "2013-11-15%", if you run your test on the 15th november)
Note that there is probably an issue to fix in Accounts.pm : the user is saved instead of the branch. But this is not the purpose of this patch, so I kept the previous behavior for the moment.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work, test pass, isse/return/writeoff recorded on statistics
Removed a "=back" to make happy koha-qa
No other errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
DelItem should return 1 if the item has been deleted, otherwise 0.
Test plan:
Verify that t/db_dependent/Items/DelItem.t returns green
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To delete an item, only the itemnumber should be mandatory. The DelItem
routine can retrieve the biblionumber from the itemnumber.
Test plan:
Verify that t/db_dependent/Items/DelItem.t passes
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since C4::Context->dbh shares the DB handler, it's useless to pass it to
routines.
Test plan:
Try to remove an item from the Koha interface.
Verify that unit tests pass.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When using the backdating of returns feature, an item that is not
overdue is treated as being as many days overdue as it is *not* overdue.
This is due to the fact that _get_chargeable_units appears to return the
difference between the return date and the due date without
consideration the return date being earlier than the due date.
Test Plan:
1) Apply the unit test patch
2) prove t/db_dependent/Circulation.t
3) Note the failure
4) Apply the second patch
5) prove t/db_dependent/Circulation.t
6) Note there are no failures
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Fixes some badly named variables also
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
In order to test this, you need to activate SpecifyReturnDate.
I confirmed the problem and verified that the bug fixes it
by running the tests, but also by testing in staff.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
As of http://perldoc.perl.org/functions/keys.html we should avoid passing
a scalar parameter as it is not backwards compatible with squeezze's Perl
version (5.10).
Cite:
"Starting with Perl 5.14, keys can take a scalar EXPR, which must contain a
reference to an unblessed hash or array. The argument will be dereferenced
automatically. This aspect of keys is considered highly experimental. The
exact behaviour may change in a future version of Perl."
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
On closing a budget (budget period), the user will be presented with an
option to move remaining unspent funds from the previous budget to the
newly created one - adding to the amounts already entered in those
funds.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This is the main patch.
On closing a budget period, all unreceived orders are moved from the
old/previous fiscal year into the new fiscal year.
You can rollover funds unused in the previous fiscal year to the new
fiscal year.
This patch set is based on bug 12168 (bugfix) and can be tested on top
of bug 11578 (easier to see the fund structure).
The patch set is cut in 6 main patches:
- Move the budget period clone logic into C4::Budgets
The code is moved from the pl to Budgets.pm and unit tests are provided.
The original code should certainly be buggy since a typo existed.
- On cloning budget period, mark original budget as inactive
Cloning a budget period is already possible in Koha, this patch adds a
checkbox to mark as inactive the original budget. That avoids to edit
the budget and click the "inactive" checkbox. Both do the same action.
- On cloning budget periods, add a "reset all funds" option
Same as before, a new checkbox is added on cloning a budget period. If
you check it, all fund amounts will be set to 0. Otherwise, no change
compared to the existing behavior.
- Close a budget period (budget)
The goal of this patch set is to move unreceived orders from a budget to
another. This patch adds a C4::Budgets::MoveOrders routine which does
this job.
This action is only possible if the fund structure is the same for both
budgets, the budget_code field should be the same.
- On closing budget period, move unspent amount
Unspent amount will be move from the previous budget structure to the
new one.
- Add UI report
This patch only adds a report when closing a budget is done.
Test plan:
Wording: below, budget is a "budget period" and fund is a "budget".
Prerequisite: Having 1 active budget with some funds (with different
levels and different amounts). Order and receive some orders (not all).
1/ Go on the budgets administration page (admin/aqbudgetperiods.pl) and
duplicate the structure of this budget ("Duplicate" link in the
"Actions" column).
2/ Enter start and end date for this budget and mark the original budget
as inactive.
3/ Note that a new budget is created, with the same fund structures (and
same value) and that the old one is marked as inactive (see
admin/aqbudgets.pl page with patches from bug 11578).
4/ Try to close the new budget: it is not possible, there is no
unreceived orders for this budget.
5/ You can close the inactive budget ("Close" link in the "Actions"
column).
6/ Verify the number of "Unreceived orders" is correct and select the
new budget in the budget list. Click on the "Move remaining unspent
funds" if you want to move unspent amounts.
7/ A report view is displayed and show you the ordernumber which have
been impacted (grouped by fund).
8/ Try different configuration, depending on the selected checkboxes.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a checkbox "reset all funds" (budgets).
If it is checked, the new created budgets (funds) will be reset.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a checkbox "mark original budget as inactive" (budget
period).
If it is checked, the original budget will be marked as inactive.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Note the typo InsertInTable "aqcudgets", note sure about the existing
behavior before this patch!
This patch adds a link "Duplicate" in the action list for budget
periods (budgets).
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The opacsmallimage system preference is unused in the bootstrap theme.
It can be removed now that prog and ccsr are deprecated. This patch does
so.
To test, apply the patch and run updatedatabase. Confirm that the OPAC
works properly and the preference can no longer be found.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Preference removed, no koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Before bug 9811, if you searched for "John Doe" and only 1 patron with
this firstname/surname existed, the patron detail page was displayed.
Now the result lists all patrons with ( firstname=john or doe ) or (
surname=john or doe). Which is quite annoying when you expect only 1
result.
Test plan:
0/ Create some patrons like: "John Doe", "Jane Doe", "John Smith".
1/ Search for "John Doe" in the patron search box
2/ Verify you got 2 results
3/ Apply the patch
4/ Search for "John Doe" in the patron search box
5/ Verify you are redirected to the right patron detail page.
Signed-off-by: Dobrica Pavlinusic <dpavlin@rot13.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It's quite common to have [something] within facet data, and it produces following error:
Unmatched [ in regex; marked by <-- HERE in m/^[ <-- HERE
This problem was intoduced in Bug 12151 but is trivial to fix.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Good catch.
To test:
- Created a bibliographic record, linked to an authority record (personal name). Did a search that returned the author as a facet.
- Added a [ symbol to the author name.
- Repeated the search
=> FAIL: "Unmatched [ in regex; marked by <-- HERE in m/^[ <-- HERE"
- Apply the patch
- Retry the search
=> SUCCESS: No error, bracket shows correctly.
Passes koha-qa.pl too.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The function header says that DelBiblio checks to make sure there aren't
any issues on any of the items. What the code does, on the other hand,
is to check whether biblio has any items attached, and refuses to
delete biblio if it has any.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since all scripts use the '.tt' sufix for template names
there's no need for and regexp that changes from '.tmpl'
to '.tt'.
Regards
To+
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Since we switched to Template Toolkit we don't need to stick with the
sufix we used for HTML::Template::Pro.
This patch changes the occurences of '.tmpl' in favour of '.tt'.
To test:
- Apply the patch
- Install koha, and verify that every page can be accesed
Regards
To+
P.S. a followup will remove the glue code.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
We noticed a bad encoding (diacritics replaced by <?>) in acquisition basket when updating a server to Debian Wheezy.
We found it comes from a query containing biblio.title twice.
Maybe the mysql newer version creates this side-effect.
Test plan :
- Create an order on a record containing a diacritic in title
- Look at the basket : cgi-bin/koha/acqui/basket.pl?basketno=x
=> Without the patch the record title is bad encoded (with <?>)
=> With this patch the record title is well encoded
- Check also basket CSV export
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Good catch!
Works as expected, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Duplicated biblio.title is a (minor) bug, and should be removed.
The side-effect of it solving an encoding problem might be seen
as problematic: it hides a real problem.
The efforts on 11944 actually solve this encoding problem (11944
merged into master actually fixes this), so I'm pushing it, for
a short term solution for stable, with the hope that we will soon
have 11944 pushed.
BTW, non-diacritic but non-ASCII characters are not broken either.
If you do a kill -s HUP sipserver_pid the server process
should restart its children.
This was not happening although it was logging the commencement
of the process.
Removed traces of Exporter usage this was always incorrect
this program inherits from Net::Server 'use base' to make inheritance
clearer. Removed unnecessary begin block
made file executable so it can run
added a shebang line so OS knows to invoke perl to compile and run
the file.
I've removed the debug code dumping the config to STDOUT,
it should not have gone into the production version.
One of the first things this program does is close stdout etc and
reopens the sip sockets to them. Assuming you can print to them other
than as part of the sip dialogue is not always safe.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch changes how the OPACBaseURL parameter gets set in the subroutine
get_template_and_user in Auth.pm.
Currently, it's being set by the $ENV{'SERVER_NAME'} variable. In many
cases, this will probably match the URL that the user uses to access a
page. However, this causes problems with reverse proxies.
There are ways to compensate for proxy servers (such as inspecting
other variables set by the web server), but such a solution seems
a bit convoluted...especially since we already use the system preference
OPACBaseURL in many other parts of Koha.
We probably shouldn't be passing OPACBaseURL from Auth.pm at all, and
instead use the Koha TT plugin and using_https param to determine
protocol. However, that's outside the scope of this bug/patch.
This patch is just meant to fix an existing bug.
I did leave the $ENV{'SERVER_NAME'} as a full back if OPACBaseURL isn't
set, but that's it.
_TEST PLAN_
Before applying:
1) Clear your OPACBaseURL preference
2) Perform a search in the OPAC
3) Click on or hover over the orange RSS icon
4) Note that the URL used for the RSS links is either:
a) The same URL you used to access Koha (no reverse proxy)
b) The ServerName from your Koha apache conf which isn't the
same URL you used to access Koha (reverse proxy)
5) Add an OPACBaseURL that isn't the same as the actual OPAC URL
6) Note that the OPACBaseURL system preference has no effect here
After applying the patch:
7) Refresh the page
8) Note that the URL you see now is actually the OPACBaseURL system
preference that you set
9) Clear your OPACBaseURL system preference
10) Refresh your search page
11) Note that the URL has reverted back to the URL that you saw before
(either the original Koha site URL or the Koha ServerName defined
in Apache and not the URL of the proxy)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If items is created on receiving, cancel a receipt should delete them.
The code only manage the case if the order is a child of another order
(partial).
To reproduce:
1/ Set AcqCreateItem to receiving
2/ Order one or more item(s)
3/ Receive the order and verify the item is created
4/ Cancel the receipt
5/ The item is not deleted
Test plan:
1/ Apply this patch and do again previous steps. The item should not be
deleted at step 5.
2/ Set AcqCreateItem to ordering and verify the item is not deleted.
Signed-off-by: marjorie barry-vila <marjorie.barry-vila@ccsr.qc.ca>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes a reference to prog theme on getlanguages()
when ENV var HTTP_ACCEPT_LANGUAGE is checked.
Changed to use sysprefs to find theme for opac and intranet
To test:
1) Apply the patch
2) Translate for a couple of languages: de-DE, fr-FR, es-ES, etc
3) Enable those languages for OPAC on I18N prefs
4) Using Firefox, clean all history/cookies
5) Change variable intl.accept_languages (will do several times)
a) got to about:config
b) search 'lang'
c) look for the variable, double click, change to 'de-DE'
6) Go to opac page, must load in german
7) Repeat for each translated lang: clean > change val > reload opac
On each case opac must load on configured language
8) Just to test, set variable on untranslated lang, opac page
must load on first value of list of enabled languages
9) prove t/Languages.t
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch fixes some potential SQL syntax errors, which can cause
fatal software errors in Koha when the environmental variable DEBUG
is on.
_TEST PLAN_
Before applying:
0) Ensure that you don't have "SetEnv DEBUG 1" in your Apache config
1) Create a new bib record
2) Click on the "Holds" tab before creating any items
3) Note the message "Cannot place hold: this record has no
items attached."
4) Add "SetEnv DEBUG 1" to your Apache config
5) Restart Apache
6) Refresh your page
7) Note the following Software Error: "DBD::mysql::st execute failed:
You have an error in your SQL syntax; check the manual that
corresponds to your MariaDB server version for the right syntax to
use near ')' at line 3 at /koha/lib/C4/Koha.pm line 835.
8) Apply the patch
9) Refresh your page
10) Note the message from Step 3
Thorough tester:
11) Remove "SetEnv DEBUG 1" from your Apache config, restart Apache,
and refresh your page. You should see the message from Step 3.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Error reproduced, patch fixes it.
Tested following test plan, no koha-qa errors.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch shifts required DBIx::Schema::Loader to a newer
version to take advantage of improved smarts about foreign
key relationships.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Yohann Dufour <dufour.yohann@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Under certain circumstances misc/link_bibs_to_authorities.pl creates
multiple authority with identical heading.
Test plan:
1. Have some (2-3) biblio records with some repeated headings
Have BiblioAddsAuthorities = allow, AutoCreateAuthorities = generate
Have no authority records
2. Run misc/link_bibs_to_authorities.pl script
3. You will get multiple authority records -- one for each occurence of a
heading in biblio record.
4. Apply the patch.
5. Repeat 1-3 (remember to have "fresh" biblios, without $9, and no
authorities).
6. The problem should be fixed.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as described.
This patch removes the use of smartmatch operators in the search code.
Regards
To+
Edit: this revision uses 'grep' instead of Lists::MoreUtils::any
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Tested search, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The C4::Record::marc2bibtex subroutine supposes hashref keys are sorted
which is wrong with perl 5.18
Note that the t/db_dependent/Record.t fails without this patch.
Test plan (for perl >= 5.18 only):
1/ prove t/db_dependent/Record.t should return green
2/ Try to export a record to bibtex and verify the order is correct
(should be author, title, year, published, etc.).
http://bugs.koha-community.org/show_bug.cgi?id=12409
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Wrong Bug number on heading.
Work as described, test pass, no koha-qa errors.
The problem is to think that a hash returns
keys in a particular order, that's not true
and no matter which perl version.
Code as was left is... misleading.
Comments talks about a hash, which is no more.
On array asignment "a => b" is equivalent to "a, b",
but the former is usually used on hashes, so a
replacement of '=>' by ',' could clarify what are we storing.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixing the comments in a follow-up patch.
Tests pass now without problems and records export ok.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch includes:
- removing the use of subroutines InsertInTable, UpdateInTable, SearchInTable replaced by subroutines of DBIx::Class in the subroutines AddBudget, ModBudget, GetBudgets, AddBudgetPeriods, ModBudgetPeriod and GetBudgetPeriods and admin/aqbudgetperiods.pl
- removing old database fields in OrderFromSubscription.t, Bookseller.t, Budgets.t, Serials.t, Serials_2.t
- improvement of unit tests in t/db_dependent/Budgets.t
- adaptation of calls to the subroutines AddBudget, ModBudget, GetBudgets, AddBudgetPeriods, ModBudgetPeriod and GetBudgetPeriods in order to match with the use of DBIx::Class
Test plan:
1) Execute the UT of all of files wich uses AddBudget, ModBudget, GetBudgets, AddBudgetPeriods, ModBudgetPeriod or GetBudgetPeriods by launching the command :
prove t/Budgets/ t/Budgets.t t/db_dependent/Budgets.t t/db_dependent/Acquisition.t t/db_dependent/Acquisition/ t/db_dependent/Bookseller.t t/db_dependent/Serials.t t/db_dependent/Serials_2.t
2) The result has to be a success :
t/Budgets/CanUserModifyBudget.t ........................... ok
t/Budgets/CanUserUseBudget.t .............................. ok
t/Budgets.t ............................................... ok
t/db_dependent/Budgets.t .................................. ok
t/db_dependent/Acquisition.t .............................. ok
t/db_dependent/Acquisition/GetBasketsInfosByBookseller.t .. ok
t/db_dependent/Acquisition/GetOrdersByBiblionumber.t ...... ok
t/db_dependent/Acquisition/Invoices.t ..................... ok
t/db_dependent/Acquisition/OrderFromSubscription.t ........ ok
t/db_dependent/Acquisition/TransferOrder.t ................ 1/11 # Transfering order to basket2
t/db_dependent/Acquisition/TransferOrder.t ................ ok
t/db_dependent/Acquisition/close_reopen_basket.t .......... ok
t/db_dependent/Bookseller.t ............................... 16/72 WARNING: GetBooksellerWithLateOrders is called with a negative value at /home/yohann/koha/C4/Bookseller.pm line 135.
t/db_dependent/Bookseller.t ............................... ok
t/db_dependent/Serials.t .................................. ok
t/db_dependent/Serials_2.t ................................ ok
All tests successful.
Files=14, Tests=571, 22 wallclock secs ( 0.17 usr 0.03 sys + 20.26 cusr 1.10 csys = 21.56 CPU)
Result: PASS
3) Go on the page admin/aqbudgetperiods.pl : Koha Administration > Budgets
4) Click on the button "New Budget" and record a new budget with a "nonzero amount" and "make budget active"
5) Click on the button "New Budget" and record another budget without "make budget active"
6) Verify there is the firt budget displayed in "Active budgets" and the second budget in "Inactive budgets"
7) Edit a budget and verify the new values are updated
8) Click on the budget active name in order to go on the page admin/aqbudgets.pl
9) Click on the button "New fund for ..." and record a new fund
10) Click on the button "Edit" then "Duplicate budget ..." in order to duplicate the budget
11) Verify there are two budgets in "Active Budgets" and one in "Inactive Budgets"
12) Click on "Funds" in the menu and verify there are two identical funds and each is associated to a different budget.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Use C4::Languages::getlanguage() instead of
C4::Templates::_current_language()
Test plan:
1/ Set one of the 4 XSLT sysprefs to 'default'
2/ Go to the corresponding page
3/ Switch language and check that the right XSLT is used
4/ Set the same syspref to something with '{langcode}' in it. For
example:
"../koha-tmpl/opac-tmpl/bootstrap/{langcode}/xslt/UNIMARCslim2OPACDetail.xsl"
5/ Go back to the corresponding page
6/ Switch language and check that the right XSLT is used
7/ Change a compact.xsl for a language (for example
koha-tmpl/intranet-tmpl/prog/fr-FR/xslt/compact.xsl) to be able to see
differences
8/ Go to a biblio detail page in staff interface and click on "MARC
Preview: Show"
9/ Close the popup, switch language and click again on the same link
10/ Check that the correct XSLT is used.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works as described following test plan.
No koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
No problems found, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
LDAP auto-provisioning should set default messaging preferences upon
creation of a user.
Signed-off-by: Ulrich Kleiber <ulrich.kleiber@bsz-bw.de>
Manually applied to 3.12.9 and it works beautifully in test and production.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The file C4/Maintainance.pm is not used anywhere, it can be removed, and by extension, the file t/Maintainance.t too.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
A relic from the past :)
No references to this file or it's subs
No errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch restores the enhancement introduced by Bug 10318.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch add DataTables using server-side processing for the patrons
search.
It adds:
- 1 module C4/Utils/DataTables/Members.pm
- 2 services svc/members/search and svc/members/add_to_list
- 1 template members/tables/members_results.tt
- 1 new practice which is to add template for DataTables in a
subdirectory named 'tables'.
Impacted scripts: members/members-home.pl and members/members.pl
To go further: We can imagine that all patrons searches use the same
service with no big changes: 1 little template creates a JSON file and
to implement DataTables on the template page, that's all.
Amended patch: Since bug 10565 has been pushed, these patches don't
apply cleanly. I had to rewrite a part of the patron list feature.
I removed the choice to add all resultant patrons from a search. I think
this choice is useless with this patch: we are able to display the
number of patrons we want and to select all of them.
Test plan:
- Check that there is no regression on searching patrons.
- Try filters on the left of the screen.
- Try to sort each column.
- Try the "Browse by last name" links.
- Check that the "Clear" button clears yours filters.
- Try with IndependantBranches ON and OFF.
- Verify this feature does not break the patron list feature (cf bug
10565).
Signed-off-by: Cedric Vita <cedric.vita@dracenie.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script, couldn't find any regressions
or problems. Some notes left on the bug.
Bug 9811: Add unit tests for C4::Utils::DT::Members
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Bug 9811: QA followup
- removes 2 tabs
- removes mysqlisms
- add sort on borrowernotes
- fix wrong capitalization
- cat => Category
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Thx for fixing these!
Bug 9811 - multilines notes brakes JSON
In new patron search feature, the search results are fetched using Ajax and returned in JSON format.
The JSON is created by TT using koha-tmpl/intranet-tmpl/prog/en/modules/members/tables/members_results.tt.
One of the fields is the borrower notes. When this notes contains several lines, the JSON is broken.
This patch uses TT fileters to consert in notes linefeeds into HTML line break (html_line_break) and then remove linefeeds (collapse).
Test plan :
- perform a member search that does not return a borrower with a circ note
- edit one of the borrowers returned by this search
- enter serveral lines of text in "Circulation note" and save
- reperform the member search
=> circ note is well displayed on several lines
Bug 9811: use count(primary_key) instead of count(*)
Bug 9811: A limit clause should be always added.
By default, we want to retrieve 20 first results.
Bug 9811: Load the page without any data.
Displaying the first 20 patrons is not useful. With this patch, the
table is hidden and no record is retrieved by default.
On the same way, the existing side effect on redirect disappears.
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
-------------
-TEST REPORT-
-------------
For the filter: Tested all the search fields, branches, search type.
Found a bug with "date of birth", followup provided.
Tested display limits and verified that AJAX-queries are
efficient (using LIMIT clause) to not stress DB needlessly.
Tested adding Patrons to a list.
A good feature, which seems to work quite well.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Adding my test plan to the last patch of this bug.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
On the cataloguing search (cataloguing/addbook.pl), if an item has a
notforloan value > 0, the item is not listed in the Location column.
It is quite confusing, the current behavior let patrons believe that
there is not item for the biblio (or less than the real count).
Test plan:
1/ Create 2 biblio records A and B
2/ Create some items for A
3/ Create 1+ item(s) for B with a notforloan status > 0
4/ Reindex both records
5/ Launch a search on the cataloguing module and verify that the
notforloan items are not listed in the 'Location' column.
6/ Apply this patch and verify the not for loan items are listed ("Not
for loan (XXX)").
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes tests and QA script, not for loan items now show up.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch reduces three repeated code fragments into a single
internal subroutine, which is easier to read, has comments,
and should make it easier to refactor more buildQuery code
in the future.
_TEST PLAN_
Before applying
1) Run a bunch of different searches in the staff client and OPAC
in separate tabs
2) Apply the patch
3) Run the same searches again (maybe in yet more tabs) and notice
that the results are exactly the same.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Same results, no errors.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If flagsrequired is set, authnotrequired should be 0.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
Verify that pages in the OPAC and staff interface display correctly.
Note that there are cases where 'authnotrequired' was not passed
at all to get_template_and_user, so there may be pages that start
requiring authentication. Whether that is correct or not depends
on context.
Follow up patches are to remove all the unnessecary setting of this
value, so that the only places we set are when we do want
authnotrequired=1
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The changes made by Bug 7720 ("Ambiguity in OPAC Details location")
broke the display of OPAC branch information tooltips by making changes
to the markup which the tooltip plugin needs to function.
This patch corrects the markup to enable tooltips to work again. This
patch also makes changes to Items.pm so that branch information tooltips
can be shown for both home and holding branches (which are optionally
displayed now via the changes by Bug 7720). Before this patch the
tooltip would always display the information for the holding branch
regardless of the OpacLocationBranchToDisplay setting.
This patch also changes the footer include, adding an alias for the
jQueryUI tooltip function to prevent conflict with Bootstrap's function
of the same name.
To test, you must have at least two libraries configured with "OPAC
info" for display in the OPAC.
Modify the holdings of a title so that there is at least one item which
has different holding and home branches matching your library configured
above.
View the detail page for that record under various values of the
OpacLocationBranchToDisplay system preference:
- "holding library" : The table of holdings should show a column for
only the holding library. Hovering your cursor over the library name
should display the branch information you configured for that library
in a tooltip .
- "home and holding library" : The table of holdings should show columns
for both home and holding library. Hovering your cursor over each
should show the corresponding library information tooltips.
- "home library" : The table of holdings should show a column for
only the home library. Hovering your cursor over the library name
should display the branch information you configured for that library
in a tooltip.
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and tests.
Works with all settings of OpacLocationBranchToDisplay.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
In C4::Letters::GetLetters, the code filter was not used as a query
parameter.
Moreover, the JS code was buggy. We only need to check the letter code,
except if it is an edit and the letter code has not been changed.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This patch is a dirty way to fix a design issue on notices.
Currently the code assumes that a letter code is unique. Which is wrong,
the primary key is module, code, branchcode.
Maybe we should add a primary key (id) for the letter table in order to
pass the id to the template and correctly manage the letter code
duplication.
Test plan:
Try to duplicate a letter code using edit, add and copy actions.
If you manage to do it, please describe how you did.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
The GetLetters subroutine should return an arrayref with different
letters for a module.
Test plan:
0/ Delete your notices with module=claimacquisition, claimissues,
serial
1/ Go on the late orders page (acqui/lateorders.pl) and verify you
cannot choose a notice for claiming
2/ Create a notice with module=claimacquisition
3/ Go on the late orders page (acqui/lateorders.pl) and verify you
can choose the notice for claiming
4/ Go on the Claim serials page (serials/claims.pl) and repeat the same
thing with the a "claimissues" notice
5/ Create a new subscription (serials/subscription-add.pl) and verify
you cannot choose a notification for patrons.
6/ Create a notice with module "serial" and verify you can.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script. Additional tests done:
- copy notice ODUE, on saving you are now prompted to choose
a new CODE for the notice
- edit new notice, try to set code back to ODUE. You are
prompted that the code is already in use.
This will prevent people from accidentally overwriting a letter
with the same letter code.
1) Test record has 1 single item, checked out to patron X
2) Place 3 holds for patrons A, B and C, all title level hold this time
A, B, C, item branches and staff branch are the same.
3) Return item, confirm hold
4) Confirm item is now waiting for patron A
Priorities are: A = Waiting, B = 1, C = 2
5) Open patron account of user B, checkout book
Koha asks: Item X has been waiting for patron A... Revert
waiting status
Confirm.
6) Check priorities:
Hold list shows: A = 1, C = 1
Database says: A = 1, C = 3
7) Apply this patch
8) Repeat steps 1-6
9) Note the priorities are correct
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Test plan correctly predicts the error and the correction made by the
patch.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The OverDrive integration needs to connect to an authentication server
over HTTPS, and many systems do not install the necessary module
(LWP::Protocol::https) by default.
Test plan (for patch):
1) Run koha_perl_deps.pl -a, verify that LWP::Protocol::https appears in
listing.
Test plan (to verify that LWP::Protocol::https is necessary, needs OverDrive access):
1) Remove LWP::Protocol::https (liblwp-protocol-https-perl under Debian).
2) Run an OverDrive search on the OPAC, it should fail.
3) Reinstall LWP::Protocol::https.
4) Rerun OverDrive search, it should now succeed.
Note: older versions of Debian do not need to install LWP::Protocol::https separately;
the Debian scripts have been updated to reflect this divide.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12041 made xt/author/podcorrectness.t consider files in the 'Koha' namespace.
Some of them where failing. This patch fixes some of those POD problems.
Best regards
To+
Test:
1) run prove xt/author/podcorrectness.t
it fails
2) apply patch
3) run again, now it's ok
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Before patch test fails. After it, it pass
No koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch implements 2 suggestions on comment #3
- Prevents creation of a new user with same userid
of database user
- When checking password, if userid matches database user,
only check against pass on config file
To test:
1. Create a new user with same login as database user
any password different from real db user
2. Check that you can login on staff using this user/pass
and you are superlibrarian
3. Apply the patch
4. Login again using new pass, it must fail
5. Login again using db pass, you are now superuser,
but system does not warn you :( No problem, that's
for having one borrower with that login
6. Delete user with same login as db user
7. Try to create one again as in 1, system must return
an error of duplicate login!
8. Check for no regressions on user/pass authentication
Resubmited, has an error
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
This works nicely and as described.
Also editing the former 'superuser' will force you to
change the userid in order to save any other change.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This makes Koha::Cache behave better by default. It will use memcached
if available to do shared caching, if that's not available it will fall
back to in-memory caching. It also allows for a singleton accessor to
allow a single cache to be shared within a process.
* Added tests to confirm UTF8-cleanness.
* Added minor fixups to stop warnings.
Test plan:
* The t/Cache.t file runs successfully with and without the
MEMCACHED_SERVERS envvar set (and memcached running in the
environment.)
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes the use of the 'when' smartmatch operator from
Serials.pm
Regards
To+
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
TransformKohaToMarc() function in C4/Biblio.pm iterates through it's
argument - which is a hashref - using 'each'. Perl is not guaranteed
to return hash keys in any particular order (not to mention that
in more recent perl versions, explicit hash key order randomization
is to be expected).
As a consequence:
1) For biblio records added via acquisition (order from a new/empty
record, order from a suggestion), freshly created MARC biblio records
doesn't always have 260 $b and 260 $c stored in the proper order
2) Holdings data exported for zebra indexing as 952 fields may have
subfields generated in more-or-less random order. While it probably (?)
does not affect zebra indexing/searching in any significant way,
end result is prone to be somehow ugly (which can be a potential
issue e.g. for people running Z39.50 server) and is not guaranteed
to be consistent; different records - or even different items in the
same record, can have 952 subfields generated in indiscriminate order.
This patch fixes abovementioned issues via introducting explicit
sorting (by subfiled code/letter) for subfield pairs before they
are added to the MARC record.
To test:
1/ Try to confirm and reproduce both issues (use perl 5.18.1 if possible
for more randomly ordered results).
2/ Apply patch.
3/ Redo the tests; ensure that both issues are now fixed and that there
are no apparent regressions of any kind (especially regarding to 952 fields
generated for zebra [re]indexing).
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
This patch adds a new system preference 'OPACAcquisitionDetail'.
If it is enabled, information about items on order will be displayed on
the OPAC detail page.
Test plan:
- switch on the OPACAcquisitionDetails pref.
- set the AcqCreateItems pref to 'receiving'.
- create some orders on 1 or more items.
- go to the opac detail page and verify the "Holdings" tab contains the
line "X item are on order." (at the bottom of the table containing the
item list).
- receive the items.
- verify the number of items has decreased.
- set the AcqCreateItems pref to 'ordering'.
- create some orders on 1 or more items.
- go to the opac detail page and verify the item list contains the items
with the "on order" status.
- receive the items.
- verify the received items no longer have the the "on order" status.
To test completely this feature, you should verify there is no
regression on the pref OpacMaxItemsToDisplay, OpacSeparateHoldings and
OpacSeparateHoldingsBranch.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Also removed some blank lines from the original patch and bumped up
the DBRev.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Modifies showmarc and opac-showmarc to use new XSLT handler.
Removes cardview.pl as obsolete script.
Modifies C4/Record.pm and a typo in the test Record.t.
Test plan:
[1] catalogue/showmarc: Go to Cataloging. Search. Click Card.
[2] opac-showmarc: Go to opac detail, MARC view.
Open URL for plain view in new tab.
Change URL: Change viewas=html to viewas=card
[3] Verify that there are no references in the codebase to cardview.pl
[4] C4/Record.pm: Run the Record.t test in db_dependent.
This test uses marc2modsxml, triggering the change.
Additional: export to MODS from opac-detail.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Views Ok. Test pass. No more cardview. No koha-qa errors
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Incorporate the new object into C4/XSLT module.
The handler object needed one adjustment to allow for passing URLs.
Removed the GetURI function; it is no longer needed.
Added some documentation lines.
Moved a file-level lexical upwards in the code for visibility.
Removed some tabs (on two lines).
Note: The handler could perhaps be moved up to the Context module, or
be saved in a global ('our') variable. But I would rather not do that
now, making testing not too complex at this moment.
Test plan:
Enable XSLT preferences for opac and intranet.
Check result and detail pages.
Check individual list display (virtual shelves).
Force an XSLT error by editing one of your xsl files. Check the
corresponding display.
Put an URL in one the XSLT prefs (could just be to your own server).
Check the display.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Running XSLTParse4Display in a loop showed no significant performance
change.
One pass cost me around 0.012 sec (except for the first pass).
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Results, detail, url and list view Ok
No koha-qa errors
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Some libraries would like to streamline the cataloging process my
automatically updating notforloan values on checkin. For example, an
item is set to notforloan of -1 ( ordered ). The item, is received,
processed, and checked in for the first time before being shelved.
The checkin automatically changes the nfl value from -1 to 0. The
same workflow could be used for damaged items as well.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Set the new system preference UpdateNotForLoanStatusOnCheckin
to the following:
-1: 0
0: 1
4) Create an item, set its notforloan value to -1
5) Check in the item, note its not for loan value is now 0
6) Check in the item again, note its not for loan value is now 1
7) Check in the item again, note its not for loan value reamins 1
Signed-off-by: Havilah Lyon <havilah@aflibrary.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Testing notes on last patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The QA follow-up which adds GetURL to the TT branches
plugin means that GetItemsInfo no longer needs to be changed.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
[1] Fix capitalization
[2] Move logic for getting the home library name URL to the
Branches TT plugin
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Currently, in opac-detail.pl, there exists a column named 'Location'.
This column lists the name of the holding branch, and the item's
location description. This can cause confusion to borrowers, as
they may assume that the holding branch is the *owning* branch
(homebranch) of an item.
This could cause a situation where a borrower waits for an
item to be returned to his or her library, only to find that
the library never owned that item, and it was transferred back
to its homebranch. It could also lead a borrower to falsely
assume that his or her home library does not own a copy of a
particular item because the borrower does not see an his or her
home library listed for any of the items on the record.
In addition, even when the holding branch is different
than the home branch, the item's shelving location is displayed,
even though that branch may not use that location.
This commit makes the item details table equivalent to the intranet
details page by adding a "Home Library" column, which displays the
item's home library, as well as the shelving location.
If singleBranchMode is enabled, this column disappears and the
"Location" column displays the shelving location only.
This commit adds two new system preferences:
OpacLocationBranchToDisplay, which defines whether
to display the holding library, the home library,
or both for the opac details page.
OpacLocationBranchToDisplayShelving, which defines
where the shelving location should be displayed,
under the home library, the holding library, or both.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described. Tested all variations.
No koha-qa errors.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a new issuing rule: maxsuspensiondays.
A new column "Max. suspension duration (day)" appears in the main table
of the issuing rules.
If this value is filled, on returning an item, a patron won't be
suspended longer than this cap.
Test plan:
1/ Set "suspension in days" to 2.
2/ Check an item out to a patron and specify a due date to today - 10
days.
3/ Check the item in and verify the patron is suspended until today + 10
* 2 days.
4/ Remove the suspension.
5/ Set "Max. suspension duration" to 10.
6/ Check an item out to a patron and specify a due date to today - 10
days.
7/ Check the item in and verify the patron is suspended until today + 10
days.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
There is currently no way to set the privacy setting for newly created
patrons. This patch adds a new field "default privacy" to the patron
categories such that each patron category may have a different default
privacy setting.
Test Plan:
1) Apply this patch
2) Edit a patron category, change the default privacy to "forever"
3) Create a new patron of that category
4) Log into the catalog as that patron, verify the privacy setting
is set to "forever"
5) Repeat steps 2-4 with the settings "never" and "default"
Signed-off-by: Joel Sasse <jsasse@plumcreeklibrary.net>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Bug 6254 [QA Followup 1] - can't set patron privacy by default
* Adds default privacy column to summary table
* Adds default privacy to delete category summary
* Adds "AFTER categorycode" to the database update
* Whitespace cleanup and formatting for affected code blocks
* Switch basic DBI queries to DBIx::Class to simplify code
* Adds reference to misc/cronjobs/batch_anonymise.pl to description
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Bug 6254 [QA Followup 2] - can't set patron privacy by default
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Bug 6254: QA FIX: remove trailing whitespaces
This patch removes trailing whitespaces/tab and fix the fields order in
the updatedb entry (according to the kohastructure.pl).
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This bug adds the "vendor note" for each order in the PDF for
basketgroups. The note is displayed only if it exists, just under the
bibliographic information.
I added a separation line "--------" between bibliographic information
and the note, so that it could be visible at 1st glance.
It also replaces the internal note with the vendor in the CSV for basket
and basketgroup. It is more logical and useful for libraries to export
the note made for vendor, as those files are destined to be sent to the
vendor.
Test plan :
- fill a basket with some orders, some with internal notes, some with
vendor notes
- export the basket in CSV : only the vendor notes should be present
- put the basket in a basketgroup
- export the basketgroup in CSV : only the vendor notes should be
present
- Select "English-2 pages" template for basketgroups in Sysprefs
- export the basket in PDF : the vendor notes should be present under
the bibliographic information
- Select "English-3 pages" template for basketgroups in Sysprefs
- export the basket in PDF : the vendor notes should be present under
the bibliographic information
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This piece of TT code:
[% SWITCH lang %]
[% CASE ['en', 'eng'] %]English
[% CASE ['fr', 'fre'] %]French
[% CASE ['it', 'ita'] %]Italian
...
[% CASE %][% lang %]
[% END %]
is parsed by the TTparser.pm wrong. In the po-files, it shows up as:
...
All the "CASE [ ... ]" codes are shown as "ERROR".
This happens if any TT statement contains a ']' in it - the TTParser
looks for anything that starts with [% and ends with ].
This patch fixes it so that it expects TT directives to end
with '%]'.
To test:
1) cd misc/translator/
2) perl translate update xx-YY
3) for x in po/xx-YY-*.po; do cp "$x" "${x/.po/.po.bak}"; done
4) apply patch
5) perl translate update xx-YY
6) for x in po/xx-YY-*.po; do diff -Nurd "$x" "${x/.po/.po.bak}"; done
the only changed lines should be those that apply to msgid's with
ERROR-parameters.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No errors
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test Plan:
1) Apply patch
2) Run updatedatabase.pl
3) View some records with authorities
4) Note your previously set authority separator should still be in use
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No koha-qa errors.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
InstallAuth was in the installer directory, which meant that Plack was
unable to find it, and so running the webinstaller would fail. This
moves it into C4,
Test plan:
* Make sure the web installer runs under plack
* Make sure the web installer runs under non-plack
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
A really weird (and old) code process the calculation for the spent and
ordered sublevel funds.
It only takes into account the direct children.
So if you have:
fund1 (spent=100) parent of fund11 (spent=10) parent of fund111 (spent=1),
you get:
fund | base-level | total spent
fund1 | 100 | 110
fund11 | 10 | 11
fund111 | 1 | 1
which is wrong, it should be
fund | base-level | total spent
fund1 | 100 | 111
fund11 | 10 | 11
fund111 | 1 | 1
Test plan:
- Create 1 budget and 3 funds with the same structure as above.
- Create some orders and receive them (not all).
- Go on the fund list view and verify the values are correct.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adjusts the test so that if an "ISBN" is not
defined (because the source string did not specify a valid
ISBN), it doesn't result in a warning once the warnings
stricture is enabled in C4::Koha.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch fixes a problem where search errors like this in the logs when
running a stage import with the AggressiveMatchOnISBN syspref turned on:
search failed (isbn,phr=978-0-7517-9745-9 or isbn,phr=0-7517-9745-6 or
isbn,phr=978-0-7517-9745-9 or isbn,phr=0751797456 or
isbn,phr=9780751797459 or isbn,phr=978-0-7517-9759-6 or
isbn,phr=0-7517-9759-6 or isbn,phr=978-0-7517-9759-6 or
isbn,phr=0751797596 or isbn,phr=9780751797596 or isbn,phr= or
isbn,phr= or isbn,phr= or isbn,phr= or isbn,phr=) CCL parsing
error (10014) Search word expected ZOOM at
/usr/share/koha/lib/C4/Matcher.pm line 688.
This is most easily seen when running the script from command line
/misc/stage_file.pl.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Restore elementSetName to marcxml for DOM indexing in Zconn (Context.pm).
This prevents the need of rebuilding the index after restarting Zebra
server.
Removes the now incorrect reference to marcxml as 'superfluous' in four
dom config files.
Test plan:
[1] Do not yet apply this patch.
[2] Rebuild zebra index with the zebra config of commit
036f2a50e1.
[3] (Go back to master.) Restart your zebra server (no config change).
You will have results without details.
Apply this patch: you see details.
Reset to master: no details again.
[4] Install new zebra config from master.
Search again: you still see no details.
Restart zebra server. Search: you see details.
Apply this patch. Search: still details.
Restart zebra server. Search: still details.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested in a non-package environment (manual dev install).
The package environment should work now too (results in step 4c might differ).
Progress on bug 12012 would be appropriate to sync all changes.
Tested the response of the SRU server too.
Signed-off-by: Marc Veron <veron@veron.ch>
I tested starting on a VM with Koha 3.15.00.019 installed.
Did git pull -> Koha 3.15.00.051
Result: No details in search results.
Applied patch.
Result: Search results display fine.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch removes some sources of warning messages thrown by
C4::Languages, particular getTranslatedLanguages() when running
Koha's web installer.
TEST PLAN
---------
1) Apply first patch
2) prove -v t/db_dependent/Languages.t
-- There will be uninitialized string messages, etc.
3) Apply second patch (this one)
4) prove -v t/db_dependent/Languages.t
-- Only one carp message will remain.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Test pass, no warnings, no koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Some types of invalid ISBNs, when run through C4::Koha::NormalizeISBN
can produce ISBN objects that contain invalid ISBNs. This can be
reproduced with an ISBN that has an invalid prefix, group code or
publisher code. An example ISBN would be "0788893777 (2 DVD 45th ed)".
When attempting to look up a record with such an ISBN, you will get an
error along the lines of: Can't call method "as_string" on an undefined
value
Instead of checking for the BAD_ISBN state, we should be checking for
the GOOD_ISBN state via the method is_valid.
Test Plan:
1) Edit a record, add the following ISBN to your record:
0788893777 (2 DVD 45th ed)
2) When Koha redirects to the record, you should see the error message
described
3) Apply this patch
4) Reload the page, you should now see your record
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This sets the version numbers of the modules added by bug 12234 to more
sensible values (in this case, the versions included in Debian Squeeze.)
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
A run of update-control, adding bash-completion as a build-time
dependency, allowing update-control to ignore anything that doesn't
have a package but isn't marked as "required" by Koha, added
dependencies that we don't use but is needed by something we do use.
All fairly mundane.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When a user runs a report containing an SQL error, no
error is shown to the user. This patch fixes this.
To test:
1) Run a report with known good SQL.
2) No error is shown.
3) Run a report with bad SQL (eg. a typo in field name)
4) No error is shown.
5) Apply patch
6) Repeat 1-4. For the bad SQL report, the database error
should be shown.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan:
1/ Create a new subscription, with manual history enabled
2/ Edit history by clicking on "Edit history" under Planning tab (add
some text)
3/ Receive some serials, see that received and missing issues are not
updated in Summary tab
4/ Edit subscription and disable manual history
5/ Receive some serials, see that received and missing issues are
updated, but your notes have been kept.
6/ Edit serials and change status from/to missing or not available.
Check that missing issues are updated correctly.
7/ Edit serials and change status from/to arrived. Check that received
issues are updated correctly.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch fixes an issue caught by the test case where StrWidth()
based its calculations on the internal Adobe font rather than a
TrueType font in use.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Since the addition of search groups to Koha, the branch limiting
parameter in multiple PAC by URL support should also support
limiting by these search groups. This patch adds this ability.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch fixes two problems:
a) Bad PDF when using Helvetica font.
Current label code assigns 'italic' or 'oblique' variants
to title. Helvetica-Oblique was not defined, but is present
b) Bad alignment using center/right justification
Problem was bad font parameter passed to StrWidth
routine
To test:
1. Try making a batch using Helvetica, downloaded PDF do not open.
2. Try a batch of mixed scripts with layout alignment center or
right, only latin scripts align almost correctly.
3. Apply the patch and update your koha-conf.xml to add Oblique variant
4. Try again 1, now PDF opens
5. Try 2, now alignment is correct
New problem (for another bug): DejaVuSans has a good
support for arabic, but not Oblique variant. As selection
of italic/oblique is hardcoded, now Arabic titles are
not displayed. I'll try to add a checkbox to select
or not this feature.
Added a FIXME for the hardcoded forced oblique -chris_n
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Since built-in PDF fonts suport just Latin-1 encoding, we have
to switch to TrueType fonts to correctly encode all UTF-8 characters
(which we should be getting from database anyway).
This approach also nicely sidesteps our encoding cludges, but
requires paths to TrueType fonts which are included in koha-conf.xml
under new <ttf> section. Without this directive in kona-conf.xml
code will still use Latin-1 built-in pdf fonts.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes a few adjustments in C4::Context::Zconn.
It does no longer pass the (ignored) auth, syntax parameters to _new_Zconn.
Note that auth was not completely ignored in theory, but we never pass
auth=1 [while not having user/password in koha-conf].
Furthermore, it removes the elementSetName for dom indexing. Using marcxml
here does not make a difference. It only adds a constraint on what is in
the dom-config files. (It could probably be removed there now..)
Two cosmetic code changes:
Removes unused label retry.
And moved 'servername' into the database name option.
Test plan:
When using Zebra with dom indexing, do a biblio and authority search.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The original patch did not correctly construction ISBN phrase
searches when QP is on. Unfortunately, when attempting to fix that,
I discovered that there's a deep bug in QP that makes it generate
incorrect search queries when combining more than two atoms
in with the || operator. Consequently, until that can be fixed,
this patch ensures that if UseQueryParser is on, AggressiveMatchOnISBN
has no effect.
To state it anther way, AggressiveMatchOnISBN works only when QP
is not in use.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In UNIMARC, the isbn index is ISBN.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test Plan:
1) Catalog a record with the ISBN "0394502884 (Random House)"
2) Export the record, edit it so the ISBN is now
"0394502884 (UnRandomHouse)"
3) Using the record import tool, import this record with matching
on ISBN.
4) You should not find a match
5) Apply this patch
6) Run updatedatabase.pl
7) Enable the new system preference AggressiveMatchOnISBN
8) Repeat step 3
9) The tool should now find a match
Signed-off-by: Tom McMurdo <thomas.mcmurdo@state.vp.us>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
< and > are incorrectly transformed into HTML entities on the
XSLT result list when using the GRS-1 indexing mode.
Example:
Record: <TEST>
Result list: <TEST>
HTML source: &lt;TEST&gt
To test:
- catalog a record that contains > and <
- Reindex, without using the -x option
- Confirm the display is correct
- Reindex again, using the -x option
- Confirm the display is now broken
- Apply patch
- Reindex again with and without -x
- Verify that now the display is always correct
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Note: the problem is only visible in GRS-1 setup. It works as expected.
No behaviour change in DOM.
I believe we shouldn't be (de)escaping data ad-hoc, but it seems that GRS-1
needs it because it doesn't handle HTML entities properly. This fix is OK for
GRS-1, unneeded for DOM and probably any other modern search engine.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When itemtype is defined on biblio (item-level_itypes syspref), the
method C4::Reserves::CanItemBeReserved uses item->{itemtype}. But
ithe item comes from C4::Items::GetItem and it does not have an
'itemtype' key; in this method the item type value is always in
'itype' key.
This patch corrects it.
Test plan:
You should have itemtype on biblio and 'item-level_itypes' syspref
set to biblio.
This test plan is with ReservesControlBranch on ItemHomeLibrary.
- Choose a branch, a borrower category and an item type, for example
'NYC', 'CHILD' and 'DVD'
- Set an issuing rule for 'NYC', CHILD' and 'DVD' with 'Holds allowed'
set to 10
- Set an issuing rule for 'NYC', CHILD' and all item types with
'Holds allowed' set to 0
- Choose an item of a biblio with itemtype 'DVD', that can be reserved,
with 'NYC' as homebranch
- Choose a borrower with category 'CHILD'
- Try to request the item for the borrower
=> without the patch, you can
=> with the patch, you can't
You may check reserve is allowed with 'Holds allowed' > 0 on issuing
rule for 'DVD'.
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Great test plan - thanks!
Confirmed the bug, and the fix. Looks good to me.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If the template contains dynamic parts, the message won't be
considerated as duplicated.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Duplicate messages will be queued, but when sending the queued messages
duplicates are found and are marked as failed.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The previous patch checks if a notice has already been sent when the
current notices has been sent in queue. Which is wrong!
We have to check if a similar notice has been sent today.
This patch has been created after an observation on a production server:
If a user place on holds several items, he will receive 1 SMS per hold.
Here we only want 1 SMS for all holds.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
For PREDUE messages, one message is sent to the message_queue table for
each items in advance, meaning that the patron could receive duplicate
notices.
The SMS part for DUE and PREDUE often do not contain dynamic parts, only
a standard message.
Note that this patch *only* affects the SMS transport.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
