This patch adds a commented zebra_loglevels line to the config file.
Behavior does not change, but an admin can easily edit the variable.
Test plan:
Nothing really changed. But if you are not so sure about that, apply the
change to /etc/koha/koha-conf-site.xml.in and run koha-create. Check
that the new koha-conf contains the line and is not messed up.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The file zebra.log is actually not used, because daemon's --output
parameter sends all message to zebra-output (making that stdout
goes there too and --stdout does nothing). We do not need any
differentiation (if any at all) here; behavior does not change.
Note: zebra-error will only contain the daemon's error messages and not
the zebra error messages! So you will probably only find messages about
stopping zebra in zebra-error.
The loglevels are by default none,fatal,warn and can be changed via the
zebra_loglevels config variable (read by koha-functions.sh). If you remove
'none', you will have request-messages in the log. You can also keep 'none'
and add 'request' to achieve something similar (undocumented however).
Some of the parameters passed to daemon when stopping zebra are
superfluous and have been removed.
Test plan:
[1] Remove the file zebra.log. Look at last lines in zebra-error and
zebra-output.
[2] Remove zebra_loglevels from koha-conf (if present).
Start/restart Zebra. Search to verify if Zebra runs.
Stop Zebra and check zebra-error for a new line (killed by signal 15).
[3] Add fatal,warn in koha-conf:zebra_loglevels (do not include 'none').
Start Zebra. Check zebra-output for a line "[log] zebra_start".
Do a search and check zebra-output for lines with "[request]".
[4] Verify that zebra.log did not appear again.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Preparing for including different log levels in koha-start-zebra.
Note that the default response is none,fatal,warn; this is equal
to the options passed to zebrasrv in koha-start-zebra (for now).
Test plan:
[1] Run on the command line: source koha-functions.sh
[2] Type get_loglevels [your_instance]
By default, you should see: none,fatal,warn
[3] Add this line to your koha-conf:
<zebra_loglevels>how,are,you</zebra_loglevels>
[4] Run get_loglevels [your_instance] again.
Remove the nonsense log levels again..
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This subroutine has been added by
commit 42acfbf75b
Bug 7993: Save reports with Group/Subgroup hierarchy
But it has never been used (or git grep cheats me).
Test plan:
1/ git grep build_authorised_value_list
should not return any result
2/ Create a report, execute it
Everything should work fine.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This subroutine does not make sense anymore (Koha::DateUtils should be
used) and is no longer used.
It can be removed safely.
Test plan:
git grep slashifyDate
should not return any results
prove t/Koha.t
and
prove t/db_dependent/Koha.t
should return green
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
slashifyDate removed, all test pass successfully
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Test plan:
prove t/db_dependent/Koha.t
should return green
git grep AddAuthorisedValue
should not return any results
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The C4::Koha::AddAuthorisedValue is only called twice from
reports/guided_reports.pl and insert an authorised value.
This job can be achieve easily using the Koha::AuthorisedValue module.
Test plan:
1/ Create a new guided report
2/ Use an existing group and/or subgroup of reports
3/ Save
4/ Update an existing report
5/ Use an existing group and/or subgroup of reports
6/ Save
7/ Create or update an existing report
8/ Remove its assigned group and subgroup
9/ Save
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This subroutine is no longer in use.
Test plan:
git grep get_itemtypeinfos_of
should not return any results.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Trivial and needed removal.
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This subroutine is no longer in used and can be remove.
Test plan:
git grep GetKohaImageurlFromAuthorisedValues
should not return any results.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
(was: Bug 14658: (followup) fix issue with list context on DBIC call)
While working on bug 14659, it was discovered that the call to
...->guarantor in list context will cause the hash to be misaligned if
there is no guarantor.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
I only found one confirmation dialog, all the others use javascript.
To test:
Go to Tools -> Notices and Slips
Click Delete on a notice
Confirm Yes and No options still work as expected
Check Tools module in case I missed any confirm dialogs
Sponsored-by: Catalyst IT
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
To test:
1) Go to Tools -> Overdue notice/status triggers
2) Click Save changes (you don't have to change anything)
3) Confirm message now says 'Changes saved.' which is much nicer
Sponsored-by: Catalyst IT
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Otherwise the label is red and a bit agressive :)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The styling of the patron image upload form causes the text to be
smaller than it should be for the main body of a page. This patch
revises the form style and cleans up the markup a bit.
This patch also adds client-side validation of the form so that a file
upload is required, and a card number is required if an image file is
selected.
To test, apply the patch and go to Tools -> Upload patron images.
1. Confirm that the text in the form is the correct size.
2. With "Zip file" selected, confirm that submitting the form is blocked
and the file upload marked as required.
3. With "Image file" selected, confirm that submitting the form
with an empty card number field is blocked and the card number
field is marked as required.
4. Confirm that uploading zip files and single images still works
correctly.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
To test:
1) Notice Rotating Collections is under Patrons & Circ on tools-home.pl
2) Apply patch and refresh page
3) Notice it is now under Catalog and is in the same position it is in on the tools sidebar menu
Sponsored-by: Catalyst IT
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
To test:
1) Go to Tools -> Rotating Collections
2) Confirm actions (Add or remove items, Transfer, Edit, Delete) have moved into a drop down menu
3) Confirm all of the actions work as expected
Sponsored-by: Catalyst IT
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
A warning is raised when order amount exceed budget or fund this dialog needs to be styled with Font Awesome icons.
To test:
-Add orders to a basket
-Exceed a fund or budget
-Notice about the dialog alert
-Apply patch
-Exceed again and see the new icons
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch moves the following options into a "Settings" menu inspired
by the one in the advanced editor:
- Switch to advanced editor
- Show MARC tag documentation links
- Show tags
- Change framework
To test, apply the patch and open a new or existing record in the
standard MARC editor.
- Test that the 'Switch to advanced editor' button option works.
- Test that the 'Show MARC tag documenation links' option works (and
that your choice persists across sessions).
- Test that the initial settings for 'Show tags' respects the
'hide_marc' system preference.
- Test that the 'Show tags' option works (and that your choice persists
across sessions).
- Test that framework switching works correctly and that the menu
correctly reflects your choice.
- Confirm that other toolbar functions work as expected, both in regular
editing mode and Fast Cataloging.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as expected.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Test Plan:
1) Apply this patch
2) Go to circulation.pl
3) Ensure you can still override renewal limits with pref enabled
4) Ensure you can not override renewal limits with pref disabled
5) Go to moremember.pl
6) Repeat steps 3-4
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Fixed AllowPkiAuth issue caused by 15101.
Added missing AudioAlerts
TEST PLAN
---------
1) prove -v t/db_dependent/UsageStats.t
-- should pass after applying patch
2) Run koha qa test tools
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The first four patches do not create any noise under Ubuntu 14.04 LTS.
Running on Debian Jessie:
[SNIP]
keys on reference is experimental at t/db_dependent/UsageStats.t line 88.
keys on reference is experimental at t/db_dependent/UsageStats.t line 106.
keys on reference is experimental at t/db_dependent/UsageStats.t line 119.
keys on reference is experimental at t/db_dependent/UsageStats.t line 136.
keys on reference is experimental at t/db_dependent/UsageStats.t line 153.
keys on reference is experimental at t/db_dependent/UsageStats.t line 162.
keys on reference is experimental at t/db_dependent/UsageStats.t line 587.
[SNIP]
Instead of having 'keys $foo->{bar}', 'keys %{$foo->{bar}}' was used.
TEST PLAN
---------
1) On a DEBIAN system (Jessie gives above messages)
apply the first 4 patches interactively.
2) $ prove t/db_dependent/UsageStats.t
-- trigger noise like above.
3) apply this patch
4) $ prove t/db_dependent/UsageStats.t
-- no noise triggered.
5) koha qa test tools
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The rollback issue came from '_count' testing.
It used a 'DROP TABLE' and 'CREATE TABLE' which implicitly do autocommit.
That's why the final rollback could not be.
This patch no longer uses t::lib::TestBuilder either because it was the cause
of the warning on Comment #1 :
"DBIx::Class::Storage::txn_rollback(): A txn_rollback
in nested transaction is ineffective! (depth 1) at
t/lib/TestBuilder.pm line 308"
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Now data is preserved, no errors.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
It's saving a large number of lines
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
All tests run, no koha-qa errors
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
If we delete all biblio DB, we could have some troubles with foreign keys
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
DESCRIPTION
-----------
Add unit tests to C4::UsageStats
Subroutine :
(V : tested, X : Not tested)
V NeedUpdate
V BuiltReport
X ReportToCommunity
V _count
TEST PLAN
---------
1. Apply patch
2. prove -v t/db_dependent/UsageStats.t
-- All tests should run successfully
/!\ I have 1 warning but I don't know where it can come /!\
(in cleanup) DBIx::Class::Storage::txn_rollback(): A txn_rollback
in nested transaction is ineffective! (depth 1) at
t/lib/TestBuilder.pm line 308
TEST PLAN OPTIONAL
------------------
Go check bug 13899 to see the coverage of this module.
Coverage BEFORE this patch :
Statement : 40,5%
Branch : 0,0%
Condition : 0,0%
Subroutine : 55,6%
Coverage AFTER this patch :
Statement : 81,0%
Branch : 100,0%
Condition : 100,0%
Subroutine : 88,8%
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Initialising $phase variable to be '' if not defined.
To test:
1) Go to Reports -> Guided Reports Wizard
2) Notice warns
3) Apply patch
4) Refresh page
5) Confirm warns are gone and page still works as it should
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Warns are gone. Page still works as expected
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended patch:
-my $phase = $input->param('phase');
-$phase //= '';
+my $phase = $input->param('phase') // '';
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
To test:
1-Checkin an item in a library other than the home branch.
2-A message will display asking to return the item to the home branch
3-You will see the phrase "Print slip )"
4-Apply patch
5-Reproduce or repeat steps 1-2 and verify the punctuation mark is
no longer displayed
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
From the mailing list:
"I'm working on 3.22.02 and my logs are FILLED with the following warnings:
Members.pm: Unable to load Koha::NorwegianPatronDB at /blurred/C4/Members.pm line 46., referer: http://blurred/cgi-bin/koha/acqui/booksellers.pl
admin-home.pl: Unable to load Koha::NorwegianPatronDB at /blurred/C4/Members.pm line 46., referer: http://blurred/cgi-bin/koha/admin/preferences.pl"
I agree. Looking at C4/Members.pm other warns are all prepended with $debug.
TEST PLAN
---------
1) rm Koha/NorwegianPatronDB.pm
-- quickest and dirtiest way to get the load to fail.
2) echo > ~/koha-dev/var/log/koha-error_log
-- so it will be easy to spot the log changes.
-- back up the log file if you really want it.
3) log into the staff client and go to patrons.
-- Check the log file. "Unable to load ..." will be there.
4) echo > ~/koha-dev/var/log/koha-error_log
5) sudo vi /etc/apache2/sites-enabled/{your koha site file}
-- Find your staff client entry in your apache
configuration file and add:
SetEnv DEBUG 1
6) sudo service apache2 restart
7) apply the patch
8) refresh the patron page
-- "Unable to load..." will still be there.
9) change the DEBUG value in your apache config to 0
10) sudo sevice apache2 restart
11) echo > ~/koha-dev/var/log/koha-error_log
12) refresh the patron page
-- "Unable to load..." will NOT be there.
13) git checkout origin/master -- Koha/NorwegianPatronDB.pm
-- to bring it back.
14) refresh the patron page
-- "Unable to load..." will still not be there.
15) run koha qa test tools
Signed-off-by: Philippe Blouin <philippe.blouin@inlibro.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
1; was not at the end of the module as it should be
to ensure compilation returns true
return it to last line of code where it should be
This patch fixes an ovious mistake.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This subroutine is no longer used in this script.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
If you have a patron category with a hard renewal date, the enrolllment
period will be zero. You cannot calculate the renewal date as is done
in the script currently.
Even more, the renewaldate template var is not even used.
Test plan:
[1] Verify that checkin/checkout works as expected.
[2] Git grep on renewaldate
[3] Check the code in circulation.pl for "$renew"
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Signed-off-by: Juan Romay Sieira <juan.sieira@xercode.es>
Patch works as expected. From a biblio detail page, the link
'OPAC view: Open in new window' opens a new browser window.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
To test:
1) Go to Tools -> Patron lists
2) If there are no lists, confirm there is a message box saying 'There are no patron lists.'
3) Create a list if you do not already have one.
4) Confirm that in the 'Actions' drop down menu next to the list, the options to 'Add patrons',
'Edit', 'Delete', and 'Print patron cards' are all there and work as expected.
Sponsored-by: Catalyst IT
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This table is not used anymore and can be removed.
Test plan:
In your sql cli:
SHOW TABLES;
should return nozebra if your DB has been created before bug 7440.
Apply this patch and execute the update DB entry.
Now the table should have been dropped.
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch reverts some deletions made to staff-global.css in Bug 11559.
The deletions broke the appearance of the floating toolbar in system
preferences.
To test, apply the patch and clear your browser cache if necessary.
- Go to Administration -> System preferences and view a tab with enough
content to allow you to scroll and test the appearance of the floating
toolbar. Confirm that it looks correct.
- Open the advanced cataloging editor and confirm that its toolbar looks
correct.
- Open the normal cataloging editor and confirm that the floating
toolbar looks correct and works correctly.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised. Tollbar looks correct
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
If you enable AllowHoldDateInFuture (and its OPAC variant), you get
an additional "Hold starts on date". In that field and in "Hold not
needed after" it was not possible to enter the current date.
Although it does not really make any difference if you leave the startdate
empty or put the current date in it, we concluded that it still makes
a psychological difference. Some patrons were confused when placing a
hold because the first date to select was tomorrow. Instead of telling
them "Yes, but you can leave it empty", we should just allow the current
date as well.
The expiration date ("not needed after") also started on tomorrow. (This
field can really be empty.) But there is actually no reason not to allow
today here too. If the patron only wants it today, why force tomorrow?
How is this arranged? Well, this is one of the simplest Koha patches ever
written. It only changes the minDate option of both date pickers in one
line from 1 to 0.
Test plan:
[1] Allow future hold dates via systempreferences.
[2] Verify that you can enter today in both fields.
[3] Put today in start and expiration date. Place the hold and verify that
you can confirm the hold, check out and check in again.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The following actions were missing in the action filter list on
cgi-bin/koha/tools/viewlog.pl:
'ADDCIRCMESSAGE'
'CHANGE PASS'
'DELCIRCMESSAGE'
'RENEW'
'Run'
To test:
- Apply patch
- Go to Tools > Logs (viewlog.pl)
- Verify that the actions appear in the list 'Actions'
- Verify that the new entries filter the list as appropriate (in
combination with Modules: All or with a meaningful selection in
list 'Modules')
Note for testing: You have to set a date in 'Display from' to get results
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Logs work as advertised, translated in bug 13474
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
"Run" could be more explicit.
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch fixes the date and branch formatting of messages in patron
account display.
To verify:
Add a new message to a patron account from the 'checkouts' tab in staff,
the displayed date is not correctly formatted and the branch displays as code
instead as branch name
To test:
Apply patch, verify that the messages and branch names are properly formatted.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described. The message dates in checkouts tab follow dateformat sypref
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
We should strive to keep as much JavaScript as possible out of templates
in order to keep things modular and maximize the benefits of browser
caching. This patch moves JavaScript out of the patron entry template
Two other minor edits: Missing semicolons added on the advice of JSHint.
To test, apply the patch and confirm that the following interactions
still work on the patron entry form:
1. clear_entry(): With ExtendedPatronAttributes enabled, the "Clear"
link next to any attribute form field should work to clear the field.
2. clone_entry(): With ExtendedPatronAttributes enabled and a repeatable
attribute defined, it should be possible to click the "New" link to
add another instance of that attribute's entry field.
3. update_category_code(): With ExtendedPatronAttributes enabled and an
attribute defined which is limited to a single patron category,
changing the patron category selection should correctly show or hide the
attribute entry form.
4. select_user(): When adding or editing a patron with a "Child"
category it should be possible to search for and select a guarantor
to add to the record by clicking the "Set to patron" button.
Selecting a new guarantor should change the text of the button from
"Set to patron" to "Change."
5. noEnterSubmit(): This function should be correctly preventing you
from hitting "ENTER" in any form field to submit the form.
6. guarantordelete(): When adding or editing a patron with a "Child"
category, it should be possible to clear existing guarantor
information by clicking the "Delete" button. Clicking the "Delete"
button should change the text of the adjacent button to "Set to
patron."
7. select_city(): With one or more cities defined it should be possible
to use the drop-down menu of cities to populate the city, state, zip,
and country fields.
8. Date of birth entry should have a maximum date limit of yesterday.
The drop-down menu of years should go back 100 years.
9. Client-side validation rules should be in effect, requiring that a
valid email address be entered in the primary email, secondary email,
and alternate address email fields.
10.When editing a patron, the "Add manual restriction" link should
display the form for adding a manual restriction, and clicking the
"Cancel" link should hide it.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch changes the order of the name fields and adds a span class around
each in case of library wanting to customize further
To test:
1 - Enable course reserves
2 - Add some courses with instrcutors
3 - Note they are of form "Firstname Surname"
4 - Apply patch
5 - Note the change
6 - Note span tags
7 - Note you can hide firstname by adding to intranet user js: $(".instr_firstname, instr_separator").hide();
Sing-off note: This patch displays the names as advertised on cgi-bin/koha/opac-course-reserves.pl Sorting
the names would need some more actions but seems not to be intended by this patch.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This problem was discovered the hard way:
- Drop DB
- Create DB
- Webinstaller run until the screen is:
We are ready to do some basic configuration.
Please install basic configuration settings to continue the installation.
-- The error log file will end with an error about splitting
an uninitialized value.
TEST PLAN
---------
0) First patch already applied
1) prove -v t/Languages.t
-- success, but warn prints
2) Apply this patch
3) prove -v t/Languages.t
-- success without warning messages
4) run koha qa test tools
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described. QA test tools run OK
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Test empty database case.
TEST PLAN
---------
1) prove -v t/Languages.t
-- success (because test case is missing)
2) Apply this patch
3) prove -v t/Languages.t
-- success, but warning printed.
4) run koha qa test tools
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised. QA test tools rus OK
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
