Since we switched to Template Toolkit we don't need to stick with the
sufix we used for HTML::Template::Pro.
This patch changes the occurences of '.tmpl' in favour of '.tt'.
To test:
- Apply the patch
- Install koha, and verify that every page can be accesed
Regards
To+
P.S. a followup will remove the glue code.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch ensures that only orders that have been placed (i.e.,
orders whose basket is closed) are counted in the OPACAcquisitionsDetails
display.
To test:
[1] Turn on OPACAcquisitionsDetails and set AcqCreateItem to 'ordering'.
[2] Create an order for a record, but do not close the basket.
[3] View the record in the OPAC. It should not display any order count.
[4] Close the bakset.
[5] View the record in the OPAC again. This time, it should display
the count of items on order.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a new system preference 'OPACAcquisitionDetail'.
If it is enabled, information about items on order will be displayed on
the OPAC detail page.
Test plan:
- switch on the OPACAcquisitionDetails pref.
- set the AcqCreateItems pref to 'receiving'.
- create some orders on 1 or more items.
- go to the opac detail page and verify the "Holdings" tab contains the
line "X item are on order." (at the bottom of the table containing the
item list).
- receive the items.
- verify the number of items has decreased.
- set the AcqCreateItems pref to 'ordering'.
- create some orders on 1 or more items.
- go to the opac detail page and verify the item list contains the items
with the "on order" status.
- receive the items.
- verify the received items no longer have the the "on order" status.
To test completely this feature, you should verify there is no
regression on the pref OpacMaxItemsToDisplay, OpacSeparateHoldings and
OpacSeparateHoldingsBranch.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Also removed some blank lines from the original patch and bumped up
the DBRev.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Currently, in opac-detail.pl, there exists a column named 'Location'.
This column lists the name of the holding branch, and the item's
location description. This can cause confusion to borrowers, as
they may assume that the holding branch is the *owning* branch
(homebranch) of an item.
This could cause a situation where a borrower waits for an
item to be returned to his or her library, only to find that
the library never owned that item, and it was transferred back
to its homebranch. It could also lead a borrower to falsely
assume that his or her home library does not own a copy of a
particular item because the borrower does not see an his or her
home library listed for any of the items on the record.
In addition, even when the holding branch is different
than the home branch, the item's shelving location is displayed,
even though that branch may not use that location.
This commit makes the item details table equivalent to the intranet
details page by adding a "Home Library" column, which displays the
item's home library, as well as the shelving location.
If singleBranchMode is enabled, this column disappears and the
"Location" column displays the shelving location only.
This commit adds two new system preferences:
OpacLocationBranchToDisplay, which defines whether
to display the holding library, the home library,
or both for the opac details page.
OpacLocationBranchToDisplayShelving, which defines
where the shelving location should be displayed,
under the home library, the holding library, or both.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described. Tested all variations.
No koha-qa errors.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Records hidden with OpacSuppression are filtered from the search
results, but the opac-detail page is still visible if you know the
biblio number. This patch hides the detail page for suppressed biblios
by redirecting (controlled by the syspref OpacSuppressionRedirect)
either to opac-blocked (default), explaining that the record is blocked
(including optional explanatory text from the syspref
OpacSuppressionMessage) or to Koha's 404 page, giving no hint that a
biblio with that number exists in the system.
Test plan:
Make sure you have at least one record with 942$n == 1.
Set OpacSuppression to "Don't hide".
Do an OPAC search that should bring up your hidden record and other
records.
Observe that your record is found.
Open the detail page for the record.
Observe that it is accessible. Copy the URL for later(!).
Set OpacSuppression to "Hide".
Leave OpacSuppressionByIPRange blank.
Set OpacSuppressionRedirect to "an explanatory page ('This record is
blocked')."
Leave OpacSuppressionMessage blank for now.
Disable queryparser(!) (because of bug 10542).
Do a full zebra reindex.
Do an OPAC search that should bring up your hidden record and other
records.
Observe that your record is not found.
Open the opac-detail URL of the record (the one you copied before).
Observe that you are redirected to opac-blocked and it displays a
short standard message.
Edit OpacSuppressionMessage and input some text.
Open the opac-detail URL of the record again (the one you copied
before).
Observe that the text you entered in OpacSuppressionMessage is
displayed under the standard text you have seen before.
Set OpacSuppressionRedirect to "the 404 error page ('Not found')."
Open the opac-detail URL of the record again (the one you copied before).
Observe that you are redirected to Koha's 404 error page.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When OpacHighlightedWords syspref is on, the current search terms are
highlighted in results and detail pages.
This workes in detail page with the URL param 'query_desc'.
This parameter must be managed in results browser (appears when
OpacBrowseResults syspref is on) links.
This patch adds query_desc parameter in results list and changes next
nd previous links to be build into TT instead of perl to manage
query_desc parameter only into TT.
Test plan :
- Edit sysprefs : OpacHighlightedWords on, OpacBrowseResults on.
- Perform a search with a term existing into title
=> You see the term highlighted in search results
- Go to detail of a result with highlight
=> You see the term highlighted
- Click on "Next"
=> you see query_desc in URL, and if search term is present it is
highlighted
- Same for "Previous"
- Click on "Browse results"
- Click on a result
=> you see query_desc in URL, and if search term is present it is
highlighted
Signed-off-by: Aurélie <aurelie.fichot@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Currently, the number of items to display is hardcoded (50).
But the perl script loads all items before to check if the number of
items is oversized.
This patch adds a new pref OpacMaxItemsToDisplay (default to 50). If the
*total* number of items for a biblio is greater, no item is displayed
and a link allows to display all items.
Test plan:
1/ search a biblio with many items
2/ set the pref according the number of items you want to display
3/ verify the items are not displayed if the number of items is greater
the pref value
4/ enable the OpacSeparateHoldings pref and verify the items are
displayed in different tabs (if items have different locations).
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The template params holds and holdcount are not used in the ISBD template.
Removed the associated code from catalogue/ISBDdetail.pl.
Same applies for catalogue/MARCdetail.pl and labeledMARCdetail.pl.
Same applies also for catalogue/imageviewer.pl.
Same applies also for catalogue/moredetail.pl.
In catalogue detail.tt only the number of holds is used. Removed the code
that passed the holds array to the template.
For consistency opac-detail should also incorporate future holds into its
holds count; added the all_dates parameter for that reason.
The Reserves module is no longer needed in moredetail. Removed it. Checked
the other scripts also.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The return from GetReservesFromBiblionumber contains an unnecessary
extra variable. In scalar context an array returns its element count.
Maintaining a separate count can lead to unforeseen bugs
and imposes ugly constructions on the subroutine's users.
Remove the useless count variable from the return
This patch also changes the parameters: now the routine takes a hashref.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Placed biblio holds, future holds and item holds. Works as expected.
Tested Holds.t and Reserves.t. Pass.
Tested /cgi-bin/koha/ilsdi.pl?service=GetRecords&id=999 with two holds on
one item. Fine.
C4/SIP/ILS/Item.pm: Looked for "whatever" and "arrayref" and could not find
them anymore. Looks good.
Handled a few unneeded calls in QA follow-up.
Left only one point to-do for serials/routing-preview.pl. See Bugzilla.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test in OPAC:
* With the OPAC System Preference EnableOpacSearchHistory set
to Keep, a simple search triggers the warning patched on
line 626 of opac-search.pl
* Selecting a search result item with no Collection Code
set triggers the warning patched on line 576 of opac-detail.pl
* Have an item with Collection Code. Check that the Collection
Code shows.
* Collection Code is set by editing an item in the staff client
(952$8)
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If there are over 50 items in the holdings or Other holdings tab, the
warning and link 'This record has many physical items. Click here to
view them all.' is only shown for the first tab.
Test plan:
- Switch on the OpacSeparateHoldings pref.
- Go on a biblio detail page at the OPAC with more than 50 items
- Check that the 'view all' link appears on the second tab.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan
1. Do an authority search in the OPAC (A search for 'an:49' perhaps..
that should bring up results for authority number 49, hopefully there
are multiple pages of results, if not try again and find one that
gives you multiple pages of results)
2. Click the final result on any page of results (there must be more
results to follow for this to work)
3. Try clicking the 'Next' button in the 'Browse results' pane on
the right of the page.
4. It should take you to the next result in the search list (i.e
the first result from the next page of results) - Double check it is
correct, we found that it was often not.
5. Apply patch and run same process, this time you should get the
correct paging.
Signed-off-by: Koha Team Amu <koha.aixmarseille@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
I reproduce the issue and I confirm this patch fixes it!
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In Firefox at least, the shelf browser cannot be reopened after
hiding it with the "close shelf browser" link. This followup improves
the behavior of the "close shelf browser" link so that the shelf browser
can be redisplayed.
To test, open a bibliographic detail page in the OPAC and click a
"browse shelf" link. Click the "close shelf browser" link--the shelf
browser should be hidden. Click the original "browse shelf" link and the
shelf browser should reappear without reloading the page.
Test with Firefox and Chrome (at least).
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Testing notes:
- New unit tests in t/db_dependent/ShelfBrowser.t pass.
- System preference OPACShelfBrowser still works as expected.
- Closing and opening the shelf browser works as expected.
- Next and Previous links show new and nicer behaviour.
- Logs are clean.
Tested with Firefox and Chromium under Ubuntu.
Notes: The currently displayed record could maybe be highlighted
a bit better.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The next and previous links should completely refresh the shelf.
For example:
[<] [1] [2] [3] [4] [5] [6] [>]
Before this patch, the next and previous links were the same as the 1
and 6.
With this patch, after clicking on next, we will get:
[<] [7] [8] [9] [10] [11] [12] [13] [>]
This patch adds a new AJAX script to get the shelf browser block.
Test plan:
- On a detail biblio page, click on a "Browse shelf" link.
- Play with the next and previous links.
- Deactivate Javascript (using NoScript for example) and check that you
get the same behavior (but the page is reloaded).
- Launch the unit tests: prove t/db_dependent/ShelfBrowser.t
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If there are items for a given biblio number, and they are all
hidden, then biblio needs to be hidden. If the biblio needs to
be hidden, it immediately redirects to a 404.pl page, just as
if the biblionumber does not exist.
Arrays used to represent all the items were relocated and used,
added if they didn't exist. Arrays representing the hidden
items were relocated and used if they existed, added if they
didn't exist.
Upon debugging the opac-MARCdetail.pl modification, it was
discovered the reason getHiddenItems was failing was because
'use YAML qw/Load/;' was not mentioned in C4::Items, and other
libraries were triggering the loading of YAML to compensate
for opac-detail.pl and opac-ISBDdetail.pl files.
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch updates the wthdrawn field in items and deleteditems to be
withdrawn instead. No functional changes are made.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Save for translation files (that will be fixed on next release),
only occurrence of wthdrawn is on updatedatabase.pl
No koha-qa errors.
This touch many files, and I did not test everything,
but all seems normal. I think that any problem could
be fixed later.
Perhaps both entries in updatedatabase.pl could be joined
into one, but thats for QA.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If there are items for a given biblio number, and they are all
hidden, then biblio needs to be hidden. If the biblio needs to
be hidden, this is done by setting the biblionumber to 0, which
triggers the same output as if the biblionumber does not exist.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised.
To test
Enable 'OpacHighlightedWords'
1) Run a search with multiple results
2) Click on a title of one of the results to get the full record
display. Hit highlighting SHOULD work on this page.
3) Use either the "Next" or "Previous" buttons on this page
(opac-detail) to move to the next or previous record.
4) Moving forward or back, the highlighting should still be working on
the page.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Renamed that routine to GetItemCourseReservesInfo in
order to avoid any potential confusion with reserves
qua hold requests.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
New modules should not export any symbols by default
without a very good reason.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Adds a course reserves system for academic libraries.
The course reserves system allows libraries to create courses
and put items on reserves for those courses.
Each item with at least one reserve can have some of its attributes
modified while it is on reserve for at least one active course.
These attributes include item type, collection code, shelving location,
and holding library. If there are no active courses with this item
on reserve, it's attributes will revert to the original attributes
it had before going on reserve.
Test Plan:
1) Create new authorised value categories DEPARTMENT and TERM
2) Create a new course, add instructors to that course.
3) Reserve items for that course, verify item attributes have changed.
4) Disable course, verify item attributes have reverted.
5) Enable course again, verify item attributes again.
6) Delete course, verify item attributes again.
7) Create two new courses, add the same item(s) to both courses.
8) Disable one course, verify item attributes have not reverted.
9) Disable both courses, verify item attributes have reverted.
10) Enable one course, verify item attributes are again set to the
new values.
11) Edit reserve item attributes, verify.
12) Disable all courses, edit reserve item attributes, verify
the item itself still has its original attributes, verify
the reserve item attributes have been updated.
13) Verify the ability to remove instructors from a course.
14) Verify new permissions, top level coursereserves, with
subpermissions add_reserves and delete_reserves.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Corinne Bulac <corinne.hayet@bulac.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
http://bugs.koha-community.org/show_bug.cgi?id=8125
To reproduce:
- Make sure you do not have a session for the OPAC you will be testing
with. Delete the CGISESSID session cookie if you have one.
- Go directly to a detail view, e.g.:
/cgi-bin/koha/opac-detail.pl?biblionumber=1
- Observe the error "Can't use an undefined value as a HASH
reference at /home/magnus/scripts/kohadev/opac/opac-detail.pl line 445."
To test:
- Apply the patch
- Reload the page with the error
- You should now see the detail view of the record, as usual
Thanks to Chris Cormack who suggested the fix for this!
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested according to test plan, confirmed patch fixes the problem.
All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
the my $branches = GetBranches();
already exist at line 444 (introduced by this patch)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This feature enables a particular library's items to be emphasized and moved
to the first position on the search results and details pages of the OPAC.
It is enabled by the sytem preference HighlightOwnItemsOnOPAC.
To choose which branches items are emphasized, use the system preference
HighlightOwnItemsOnOPACWhich. It has two modes.
If set to PatronBranch, the items emphasized will be those of the same
library as the patron's library. If no one is logged into the opac, no
items will be highlighted.
If set to OpacURLBranch, the library is chosen based on the Apache
environment variable BRANCHCODE.
For example, this could be added to the OPAC section of koha-httpd.conf:
SetEnv BRANCHCODE "CPL"
The point of this feature is to allow each library on a given Koha server
to have a specific subdomain for the opac where that library's items are
empasized. That was http://branch1.opac.mylibrary.org will emphasize the
items of branch1, while http://branch2.opac.mylibrary.org will emphasize
the items of branch2.
Signed-off-by: Melia Meggs <melia@bywatersolutions.com>
Signed-off-by: Nora Blake <nblake@masslibsystem.org>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The two holdings tabs displayed whether
or not there is anything to go in them.
Signed-off-by: Corinne Bulac <corinne.hayet@bulac.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
If one item list is empty, no empty tab is shown.
All tests and QA script pass.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
OPACSearchForTitleIn is a syspref used to add links as "more searches" in OPAC record detail page.
The links can contain vars depending on record values like title, ISBN, ...
Thoses values must be URL-escaped because they can contain special characters that will brake URL and/or HTML.
This patch add a method C4::Output::parametrized_url() that replaces vars in URL usign escape and UTF-8 encoding.
Test plan :
- Define in OPACSearchForTitleIn a link with all possible vars : TITLE, AUTHOR, ISBN, ISSN, CONTROLNUMBER, BIBLIONUMBER
- Edit a record to add special characters in title : ", &, ? ...
- Go to OPAC detail pages of this record
=> Check that URL is well encoded
=> Click on link to check the term is well encoded (diacritical characters, ...)
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Nice test plan, thanks!
Verified bug and fix - both look good.
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch rewrites the GetReserveStatus routine in order to take in
parameter the itemnumber and/or the biblionumber.
In some places, the C4::Reserves::CheckReserves routine is called when
we just want to get the status of the reserve. In these cases, the
C4::Reserves::GetReserveStatus is now called.
This routine executes 1 sql query (or 2 max).
Test plan:
Check that there is no regression on the different pages where reserves
are used. The different status will be the same than before applying
this patch.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
New syspref OPACPopupAuthorsSearch.
If it is disabled, the development has no effect.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
There is just a small typo where one of the results of a conditional is
"subscription" rather than "subscriptions".
If this comes up, the correct tab (subscriptions) will not be chosen.
I'm not sure what will happen...it'll probably just have the
"holdings", "subscriptions", and "serial collection" tabs all default
to closed with none of them being open.
Test Plan:
The easiest way to test is just to double-check the other strings in the
conditional which say "subscriptions" rather than "subscription".
You can also look at opac-detail.tt where the param is shown, and note
that there is no condition for "subscription" - just "subscriptions".
Any tests other than that would be overly complex for such a trivial
patch.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Adds the following enhanced content to the OPAC, all controlled by
separate sysprefs:
1) A "Readometer" which summarizes reviews on the OPAC detail page
2) A tab with snippets of critical reviews on the OPAC detail page
3) A computed rating on the results page
To test:
Find a book that is listed on IDreamBooks.com (you may have to make
sure that you have the first edition), and one that is not. Try
each of IDreamBooksReadometer, IDreamBooksReviews, and
IDreamBooksResults sysprefs, taking note of the content appearing (or
not) as appropriate.
Updated to add missing CSS to new theme.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
all tests pass.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Rebased to latest master 2012-12-31
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch removes the superflous code related to 'publictype' which
is a key set for item hashes in some perl files. This key is never
used or stored.
Test Plan:
1) Apply patch
2) Test catalogue/detail.pl, opac/opac-detail.pl and opac/opac-user.pl
3) You should not see any changes in behavior
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
1/ It's better to set style of the video marked in a css file.
2/ Replace some
for my $i in (0..#$array)
with
for my $element in (@array)
3/ the routine in a pm returns a hash not the $template variable
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This enhancement uses information from MARC field 856 to generate the appropriate HTML5 code to embed am media player for the file(s) in a tab in the OPAC and staff client detail view. This patch supports the HTML5 <audio> and <video> element. Additionally it gives basic support for the <track> element. This element is not supported very well by recent browsers. Please consider the patch working when you get working video or audio.
Rebased to Master 22.11.2012
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
The 2 sysprefs are SeparateHoldingsBranch and OpacSeparateHoldingsBranch
and permit to chose between home branch and holding branch.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
If you click on "Browse shelf" under "<mylibrary> holdings", shelf
browser should open under this tab.
If you click on "Browse shelf" under "other holdings" tab, it should
open under "other holdings" tab.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Two tabs: "<branch> holdings" / "Other holdings"
"<branch> holdings" tab contains items whose homebranch is the current branch.
"Other holdings" tab contains all other items.
If current branch is not set (connected with mysql user or not logged in
(opac)), the display is unchanged (1 tab "Holdings")
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
If a subscription is no longer enough published (or we are not waiting
for a new periodical) we are allowed to close it.
If a subscription is closed, we are not able to receive or generate a
new serial.
On the serial module, we can now
- close a subscriptionn
- reopen a closed subscription
On serial search 2 tabs is displayed (opened and closed subscriptions).
This patch adds:
- a new field subscription.closed in DB
- a new status for serials (8 = stopped)
Test plan:
- search subscriptions
- close a subscription and check that you cannot receive or generate a
new serial
- launch another search and check that the closed serial is into the "closed"
tab.
- You are allowed to reopen a subscription on the subscription detail
page and on the subscription result page. A javascript alert ask you
if are certain to do this operation.
- Check the serial status "stopped" everywhere the status is
displayed (catalogue/detail.pl, serials/claims.pl,
serials/serial-issues-full.pl, serials/serials-collection.pl,
serials/serials-edit.pl, serials/serials-recieve.pl,
serials/subscription-detail.pl and opac-full-serial-issues.pl)
- The report statistics does not include the closed subscriptions if you
don't check the "Include expired subscriptions" checkbox.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 8782: Followup: add some minor modifications
- Show 'closed' information in biblio detail page
- Add a column in serials report table
- Search subscriptions on title words instead of string
- Prevent serials editing when subscription is closed
- Don't change status of "disabled" serials
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 8782 - Close a subscription - Followup - Fix updatedatabase.pl
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Previously we did not sanitize biblionumber and authids passed in by
the user.
To test:
1) Go to /cgi-bin/koha/opac-detail.pl?biblionumber=2hi (substituting a
valid biblionumber for the 2).
2) Notice the presence of "2hi" on this page, and also on the ISBD and
MARC views.
3) Go to /cgi-bin/koha/opac-authoritiesdetail.pl?authid=2bye
(substituting a valid authid for the 2).
4) Notice the presence of "2bye" on this page.
3) Apply patch.
4) Notice that "2hi" and "2bye" strings are gone.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
This patch adds a new column containing the itemcallnumber value into
the serial collection tab (opac detail).
930$a for UNIMARC
852$h for others
Signed-off-by: Stephane Delaye <stephane.delaye@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
(Added Stephane Delaye's sign off at the same time as mine)
As this view has never worked with MARC21, I am comfortable signing
off on the fact that the patch does not in any way impact the MARC21
display.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
After doing a search and going to the details page, it can sometimes
be difficult to see exactly *why* a record was returned by a search.
By highlighting matches on the detail page as well as the results
page, we make it much easier to figure that out.
This patch uses a query_desc CGI parameter which is inserted into links
from the results page with javascript. This serves to avoid the
potential privacy implications of a cookie, and ensures that users
without javascript enabled see no change whatsoever.
To test:
1) Do a search (or two) in the OPAC with OpacHighlightedWords on.
2) View a record or two of the results, and ensure that the correct
words are highlighted.
3) Disable OpacHighlightedWords and do another search (or two),
this time ensuring that no words are highlighted.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch removes the AmazonReviews and AmazonSimilarItems
features from the OPAC and staff client. With on Amazon
feature remaining, cover images, the *AmazonEnabled preference
is also removed in favor of checking the *AmazonCoverImages
preference. Two other system preferences, AWSAccessKeyID and
AWSPrivateKey are removed as they were required only by the
removed features.
Handling of book cover images from Amazon is unchanged.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Turned on amazon covers in opac and staff client and all
worked as expected. Then tested to make sure other cover image
services still worked and they do.
Signing off.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
The biblio/items detail pages (staff and OPAC) display
the copynumber description if an authorized value
is configured accordingly.
Signed-off-by: Gaetan Boisson <gaetan.boisson@biblibre.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Rebased to current master, works in my tests, but needs another set of eyes.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
1 more to go... :)
opac/changelanguage.pl: Code before strictures are enabled at line 24, column 1.
See page 429 of PBP. (Severity: 5)
Note: Rebased on master 06/09/2012 by jcamins
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
- in various acquisition pages and serials home
- in database : biblioitems.ean
- adds ean and its mapping in default english bibliographic framework
- adds ean mapping in default french bibliographic framework
- ean search is not enabled for MARC21
The required mapping between the ean marc field and the biblioitems.ean
database field will be automatically added on an existing unimarc installation.
However, if you already have records with ean, you will have to
run misc/batchRebuildBiblioTables.pl to populate biblioitems.ean
Signed-off-by: jmbroust <jean-manuel.broust@univ-lyon2.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Passed QA at second run. Removed a merge marker only.
New syspref is Choice, options being:
- None
- Priority only
- Holds number only
- Holds number and priority
Show holds count on OPAC detail
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
