If I access circulation.pl directly, with no patron cardnumber or borrowernumber submitted, I get an error:
Can't call method "messages" on an undefined value at /kohadevbox/koha/circ/circulation.pl line 525
This is caused by Bug 29230 which calls $patron outside a
"if ($aptron)".
Test plan :
1) In staff interface, click in 'check out' search box
2) Hit enter (without a search text)
=> Without patch you get an error
=> With patch you see a blank page /cgi-bin/koha/circ/circulation.pl
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
There was an error when circ/pendingreserves.pl was hit:
The method Koha::Items->biblionumber is not covered by tests!
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Add methods to return the messages attached to a patron.
It will add the capability to access them from notice templates.
Test plan:
Define some messages for a given patron
Go to the circulation page of the patron and confirm that they are still
displayed
Test the notice templates:
Add to HOLD_SLIP the following content
"""
[% SET messages = borrower.messages %]
[% IF messages.count %]
Messages:
<ul>
[% FOR m IN messages.search( message_type => 'L' ) %]
<li>[% m.message %]</li>
[% END %]
</ul>
[% END %]
"""
To display all the messages from staff ('L')
Adapt following your needs.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Stina Hallin <stina.hallin@ub.lu.se>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
On bug 29844 we decided to remove wantarray from Koha::Objects->search.
Reviewing the difference occurrences I found some unnecessary uses of ->as_list,
where iterators should be used instead.
This patch only removes the obvious places, not the tricky ones.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
and some more...
There are lot of inconsistencies in our ->search calls. We could
simplify some of them, but not in this patch. Here we want to prevent
regressions as much as possible and so don't add unecessary changes.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The "Delete" link is hidden but the controller does not do the necessary checks.
/cgi-bin/koha/circ/del_message.pl?message_id=1&borrowernumber=5&from=moremember
Test plan:
Create a message, see the "Delete" link, don't click it but copy it
Change logged in library and use the link
If AllowAllMessageDeletion is off you should be redirected to 403
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch:
- Adds a notice about the fee to be charged to the patron (staff and
OPAC)
- Adds the right UI description for ARTICLE_REQUEST_FEE debit types in
the UI.
To test:
1. Have some article request fee rules
2. Play with placing an article request in OPAC and staff
=> SUCCESS: You see a message about the fee
=> SUCCESS: The fees are correctly applied to the patron
3. Sign off :-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
If a patron's attributes is limited to some libraries, we must apply
this limit on the overdue list view.
Test plan:
1. Create the following patron attributes:
A that is not searchable
B is searchable and does not have library limitation
C is searchable and is limited to another library than yours
2. On the right part of the overdue list view you must see B only
Without this patch C is displayed as well.
Signed-off-by: The Minh Luong <the-minh.luong@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adjusts get_items_that_can_fill to make two requests:
first the list of items for item-level holds
second the list of biblionumbers for title-level holds
This stops the report from pulling more items for item-level hold
This patch also removes the aliases used in the code - while readability
is a bit harder, it allows for using 'me' in get_items_that_can_fill
Otherwise, this routine would need a parameter to know what we called the table.
To test:
1 - Find a record with many items available
2 - Place an item level hold for an item on the record, not the one with lowest itemnumber
3 - Run 'Hold to pull' report
4 - Note the barcode does not match
5 - Apply patch
6 - Reload report
7 - It matches!
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Bug 26352 changed the line in circ/circulation.pl that searches for a
patron card number in the barcode field from using the $barcode variable
to the $findborrower variable. This breaks AutoSwitchPatron.
Test plan:
1. make sure AutoSwitchPatron system preference is on.
2. get two patron card numbers.
3. enter the first card number to check out to the patron.
4. enter the second card number in the item barcode field.
5. observe that the barcode is not found.
6. apply patch
7. enter the second card number in the item barcode field again.
8. observe that the second patron is loaded to check out to.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test:
1) go to the main page of Koha and search in the "Check out" search window type "näyttö".
2) see that umlauts got replaced with replacement characters.
3) apply the patch.
4) repeat 1-2, ensure that umlauts displayed correctly and are not getting replaced with replacement characters.
JK: remove period from commit title
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes the code for itemtypeslimit work, and adds options for shelving location and collection code
This also remove the 'post' method from the form to allow easy bookmarking
To test:
1 - Add holds to your system
2 - Run the holds queue builder
3 - Browse to Circulation->Holds queue
4 - Note the library dropdown
5 - Apply patch
6 - Reload and note new options
7 - Test that both limits and 'All' options work as expected
8 - Note that description at top includes options when selected
"### items found for All libraries and item type:(Books)"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch replaces the "Holding library" column in the returns table
with a 'Transfer to' column that displays the destination for the item
awaiting transfer if a transfer exists.
Signed-off-by: Ben Daeuber <bdaeuber@fargolibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The commit "Bug 29290: Rename relationships borrower =>
patron" (d46492ac23) renamed the relation for the borrowers table from
'borrower' to 'patron' but the joins were not updated accordingly so a
few scripts got broken.
To test:
1) Notice that
$ perl misc/cronjobs/automatic_renewals.pl -c -s -v
returns 255 error code on exit
2) Apply patch
3) Notice the automatic_renewals.pl works now and exit code is 0
4) Make sure /cgi-bin/koha/tools/batch_extend_due_dates.pl works.
5) Try to grep for 'borrower' in Koha source code and see if there
are any other join done using the Koha::Checkout or
Koha::Old::Checkout objects.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 29380: (follow-up) Fix renewal feature in staff interface
The commit "Bug 29290: Rename relationships borrower =>
patron" (d46492ac23) renamed the relation for the borrowers table from
'borrower' to 'patron' but the usage in the renew.pl script was not
updated.
To test:
1) Try to renew a book in intranet through the renewal tab
2) Notice it gives error
3) Apply patch
4) Notice the error is now gone
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This is based on Julian's idea on bug 28026 where we could get rid of call_recursive by passing refs as arguments to call.
Test Plan:
1) Apply this patch
2) prove t/db_dependent/Koha/Plugins/Plugins.t
3) prove t/db_dependent/Koha/Plugins/Barcode_transform_hooks.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The previous patch makes check_cookie_auth return the session instead of
$sessionID, so we are adjusting the different calls to prevent
confusion.
However they are mainly used to check the authentication status and
don't care about this second variable.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This bug allows for batch printing of multiple article requests slips
To test:
1. apply this patch
2. restart_all
3. enable ArticleRequests preference
4. create multiple article requests
5. go to circ/article-requests.pl in staff interface
6. print a single slip from a row
CHECK => it works as expected
7. select all rows and print slip from general actions menu (above the table)
SUCCESS => all article requests slips are printed
8. select multiple rows (not all) and print slip from general actions menu (above the table)
SUCCESS => only selected article requests slips are printed
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
JD amended patch: Perltidy!
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Show the TOC checkbox on OPAC and staff.
Test plan:
Add new article request on OPAC or staff. Tick checkbox.
Verify if TOC is Yes on opac-user or staff patron details.
Check the list view on circ/article-requests.pl.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The 'Checkout' search hijacks some of the DataTables searching code used for 'Search patrons'
Rather than try to implement the search again on another page, we can simply send the user
to the patron search if the cardnumber is not found
Additionally, this patch adds a 'Check out' button to the patron search results to allow
going to checkotus directly
To test:
1 - Apply patch
2 - Perform a 'Checkout' search from the header
3 - Note that:
For a cardnumber, you are redirected directly to checkouts page for the borrower
For a search with one result, you are redirected directly to the checkout page for the borrower
For a search with many results, you are redirected to the patron search results
and there is a 'Checkout' button under the cardnumber
4 - Confirm circulation page works as expected (i.e. checkout to a patron)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: George Williams <george@nekls.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Some of our partners have unusual barcode requirements that have
required us to transform scanned barcodes using javascript. This is not
the most reliable method. It would make more sense to have Koha
transform the barcodes on the backend using a plugin. We should add
hooks to transform and generate new item and patron barcodes.
Test Plan:
1) Apply this patch
2) Download and install the Barcode Transformer plugin
https://github.com/bywatersolutions/koha-plugin-barcode-transformer/releases/download/v1.0.1/koha-plugin-barcode-transformer-v1.0.1.kpz
3) Go to the plugin configuration page, set the configuration to the example configuration from the same page
4) In the patron search and anywhere else you can scan a patron
cardnumber, type in some cardnumbers but prefix them with A and postfix
them with A or B, e.g. A12345A, A12345B
5) Note the letters are removed by Koha!
6) Try a cardnumber like X123456Y
7) Note Koha converts it to Z13456Z
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Some of our partners have unusual barcode requirements that have
required us to transform scanned barcodes using javascript. This is not
the most reliable method. It would make more sense to have Koha
transform the barcodes on the backend using a plugin. We should add
hooks to transform and generate new item and patron barcodes.
Test Plan:
1) Apply this patch
2) Download and install the Barcode Transformer plugin
https://github.com/bywatersolutions/koha-plugin-barcode-transformer/releases/
3) Go to the plugin configuration page, set the configuration to the example configuration from the same page
4) In the item barcode field on the checkin and checkout pages,
and anywhere else you can scan an item barcode, type in some
valid barcodes, but prefix them with X and postfix them with
Y, e.g. X123456Y
5) Note the letters are removed by Koha!
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: (QA follow-up) Fix QA script issue
* Fixes issue with barcode generate stub so perlcritic is happy
* Removes extra semicolon from return call in configure method
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: Add unit tests
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: (QA follow-up) Remove unused method barcode_transform
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: (QA follow-up) Rename barcode_transform to item_barcode_transform
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: (QA follow-up) Barcodes inputted into Koha should always pass though barcodedecode
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: (QA follow-up) Catch one last case of itemBarcodeInputFilter
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: (QA follow-up) Fix Checkouts.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: Use call_recursive() as a replacement for call()
The method `call()` is not sufficient for barcode transformations. It's
possible that more than one barcode transformation plugin will be
installed. The `call_recursive()` method takes the output of the first
plugin and uses it as the input for the next plugin and so on. This allowes
each plugin to see the current version of the barcode and modify it if
necessary.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: Fix t/db_dependent/Koha/Plugins/Circulation_hooks.t
Bug 26351: Revert improper change to unit test, fix number of tests
Bug 26351: Remove uneeded use Koha::Plugins statements
Left over from previous changes
Bug 26351: Add missing barcodedecode import
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds better error handling and reporting when placing an
article request fails. It also makes the error messages translatable.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes it possible to limit article requests per patron per day.
To test:
1. Apply patches
2. updatedatabase
3. Enable ArticleRequests preference
4. Edit a patron category and set an article request limit to 1
CHECK => if you set the limit to anything else but a positive number or empty string, a warning appears
5. In staff search biblios and request an article for a patron of the modified category
6. Repeat step 5
SUCCESS => if limit is reached, when you select the user to request an article a warning appears saying that the limit was reached
7. Repeat steps 5 and 6 but this time in opac
SUCCESS => Patron is not allowed to request another article if limit is reached
8. prove t/db_dependent/ArticleRequests.t
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Edit: This patchset originally changed the 'categories' table structure
and relied on that for limit calculation. I removed all that code and
squashed into this one, as we moved everything to the circulation_rules
table.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the stage "requested" in article request process, which
is previous to pending stage.
To test:
1. apply this patch
2. updatedatabase
3. enable ArticleRequests syspref
4. from staff inteface and from opac search for a record and place an
article request
5. koha-mysql kohadev
6. query: select subject, content, letter_code from message_queue;
CHECK => There is a message for each article request with code
AR_REQUESTED
=> In opac-user.pl, in "Article requests" tab you should see a row
in the table with "Requested" status
5. in staff go to Circulation -> Article Requests
SUCCESS => You should see 3 tabs, one for Requested stage (with two
requests), one for Pending stage and one for Processing stage.
6. play with actions buttons
CHECK => you should see a new action called "Set request as pending"
SUCCESS => All action buttons behave as expected, and tab counts updates
correctly.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch allows staff patrons to cancel multiple holds in bulk.
To test:
1. Apply this patch
2. restart_all
3. In cataloge go to a book and place many holds
CHECK => Holds table shows a column of checkboxes
4. Play with checkboxes (have some fun ;-P)
CHECK => When you manually check all checkboxes, the checkbox in the
header also gets checked.
=> When you uncheck one of the checkboxes, the one in the header also gets unchecked.
=> If no checkbox is checked and you check the one in the header,
all checkboxes get checked.
=> If there are some checkboxes that are checked and others are
not, when you click on the checkbox in the header all checkboxes get
unchecked.
=> If all checkboxes are checked, when you uncheck the one in the
header, all checkboxes get unchecked.
=> Every time you play with checkboxes, the number in the button
"Cancel selected" changes.
5. Check some of the checkboxes and click on cancel selected.
SUCCESS => A background job gets fired to cancel all selected holds.
=> A message should appear with a link to the job.
6. Wait a few seconds and click on the link
SUCCESS => A message appears with the report of the execution of the
background job.
7. Grab a patron and search to hold
8. Select multiple biblios and click on "place hold for <patron>"
CHECK => After holds are confirmed, multiple holds table are shown.. one for
each record. Checkboxes work exactly the same as before, but scoped
for each individual table. Checkboxes from one table will not affect
checkboxes from other tables.
9. Repeat steps 4 to 6.
10. Check In some of the items so the get in Waiting state.
11. Update expirationdate os some of those holds and set it to
ReservesMaxPickUpDelay + 1 days earlier
NOTE => ReservesMaxPickUpDelay = 7 days by default, so sql syntax to update would be
=> update reserves set expirationdate = date_sub(expirationdate, interval 8 day) where reserve_id in (...)
12. Repeat steps 4 to 6 but in waitingreserves.pl, in both tabs.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 23678: (QA follow-up) Add missing template filter
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 23678: (QA follow-up) Add missing filters
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 23678: (QA follow-up) Use correct indentation
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
JD amended patch: also Koha/BackgroundJob/BatchCancelHold.pm
JD Amended patch: Full rebase and adjustements made on top of bug 26080.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1. have some overdues
2. go to the overdue report on the circulation page (overdue.tt)
3. no shelving location
4. apply patch and restart the things
5. look at the overdue report again and there should be a Shelving location column
6. make sure it is accurate
7. go to table settings and make sure you can properly hide the column. test other columns in the table and make sure they are still hiding correctly as well
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch modifies the patron search autocomplete so that library name
is shown instead of library code.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch alters a few different patron search interfaces so that
patrons from the currently-logged-in library are highlighted in a way
that differentiates them from other patrons.
To test, apply the patch and rebuild the staff interface CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- In Administration -> System preferences, make sure the
PatronAutoComplete preference is enabled.
- In the "Check out" tab in the header, type a partial patron name which
will return multiple results and wait for the autocomplete menu to
appear..
- Patrons in the autocomplete results should show the branchcode, and
patrons from the currently-logged-in library should be highlighted
in green.
- Submit your partial name in the "check out" tab.
- In the search results the branch name of patrons from the
currently-logged-in library should be similarly highlighted.
- Go to patrons browse for patrons. These results should be highlighted
as in the previous steps.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
On bug 17591 we discovered that there was something weird going on with
the way we export and use subroutines/modules.
This patch tries to standardize our EXPORT to use EXPORT_OK only.
That way we will need to explicitely define the subroutine we want to
use from a module.
This patch is a squashed version of:
Bug 17600: After export.pl
Bug 17600: After perlimport
Bug 17600: Manual changes
Bug 17600: Other manual changes after second perlimports run
Bug 17600: Fix tests
And a lot of other manual changes.
export.pl is a dirty script that can be found on bug 17600.
"perlimport" is:
git clone https://github.com/oalders/App-perlimports.git
cd App-perlimports/
cpanm --installdeps .
export PERL5LIB="$PERL5LIB:/kohadevbox/koha/App-perlimports/lib"
find . \( -name "*.pl" -o -name "*.pm" \) -exec perl App-perlimports/script/perlimports --inplace-edit --no-preserve-unused --filename {} \;
The ideas of this patch are to:
* use EXPORT_OK instead of EXPORT
* perltidy the EXPORT_OK list
* remove '&' before the subroutine names
* remove some uneeded use statements
* explicitely import the subroutines we need within the controllers or
modules
Note that the private subroutines (starting with _) should not be
exported (and not used from outside of the module except from tests).
EXPORT vs EXPORT_OK (from
https://www.thegeekstuff.com/2010/06/perl-exporter-examples/)
"""
Export allows to export the functions and variables of modules to user’s namespace using the standard import method. This way, we don’t need to create the objects for the modules to access it’s members.
@EXPORT and @EXPORT_OK are the two main variables used during export operation.
@EXPORT contains list of symbols (subroutines and variables) of the module to be exported into the caller namespace.
@EXPORT_OK does export of symbols on demand basis.
"""
If this patch caused a conflict with a patch you wrote prior to its
push:
* Make sure you are not reintroducing a "use" statement that has been
removed
* "$subroutine" is not exported by the C4::$MODULE module
means that you need to add the subroutine to the @EXPORT_OK list
* Bareword "$subroutine" not allowed while "strict subs"
means that you didn't imported the subroutine from the module:
- use $MODULE qw( $subroutine list );
You can also use the fully qualified namespace: C4::$MODULE::$subroutine
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch creates a new include for showing circulation and
patron-related messages on both the checkout page and the patron detail
page. This allows the two pages to be consistent with each other.
The patch also makes some minor CSS adjustments, including the addition
of an SVG to replace an old GIF, arrow-bullet.gif.
To test, apply the patch and rebuild the staff interface CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- View both the checkout and patron details page for patrons in the
staff interface, confirming that the information is displayed in the
same way, including:
- Pending modifications
- Pending expiration
- Expired
- Address in doubt
- Card lost
- Restricted (indefinite and with expiration)
- Outstanding overdues
- Outstanding return claims
- Patron age incorrect for their category
- Outstanding charges
- Account credit
- Waiting holds (at logged-in library or other library)
- Circulation note (from borrowers.borrowernotes)
- Messages (added at logged-in library or other library)
EDIT: Fixed merge error.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We need to add the format to the forms entering new requests:
opac/opac-request-article
circ/request-article
If the pref contains multiple formats like SCAN|PHOTOCOPY, the first listed
format will be preselected on the request form. If there is only one option,
we should not disable the select however. (Possibly hide it.)
If we have no mandatory fields, we should not allow the submit of a complete
empty form (check on OPAC).
And we need to show the format of pending requests on forms:
opac/opac-user
circ/request-article (biblio detail tab)
circ/article-requests (staff form to handle requests)
members/moremember (Article requests tab at the bottom)
circ/circulation (Checkout/Article requests tab)
Note: The last two forms use the same include file.
Test plan:
[1] Add an article request via opac or staff. Choose Scan.
[2] Verify that you see the Scan format on opac-user and the
above-mentioned staff forms.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We should remove the debug statements or use Koha::Logger when we want
to keep it.
Test plan:
Confirm that occurrences of remaining occurrences of DEBUG need to be
kept (historical scripts for instance)
Confirm that the occurrences removed by this patch can be removed
Confirm that the occurrences replaced by Koha::Logger are correct
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Looks good to me, noting a few minor points on BZ.
JD amended patch: replace "warn #Finished" with "#warn Finished", and
put the statement on a single line
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch replaces a few more trivial cases where we were using
library->branchemail with a fallback to KohaAdminEmail to just use the
new library->from_email_address method directly instead.
There were also a couple of cases where we were passing borrowernumber
and the patrons library from address too.. this is unneccesary as the
code in _send_email_massage will already default to patron library from
address if we do not pass an override.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Added a semicolon.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We are using Koha::Logger when it makes sense to keep the info,
otherwise we simply remove it
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 28572: Replace missing occurrence in misc/admin/koha-preferences
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
There is a "debug" parameter we are passing from the controller scripts
to C4::Auth::get_template_and_user, but it's not actually used!
Test plan:
Confirm the assumption
Review the changes from this patch
Generated with:
perl -p -i -e 's#\s*debug\s*=\>\s*(0|1),?\s*##gms' **/*.pl
git checkout misc/devel/update_dbix_class_files.pl # Wrong catch
+ Manual fix in acqui/neworderempty.pl
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Add unit tests to cover updateWrongTransfer
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 24434: (QA follow-up) Remove tab character
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch re-instates the call to updateWrongTransfer to ensure the
transfer line is updated to reflect the new frombranch.
Test plan
note: when applying the patches, also update the database
1/ Check an item out from it's home library
2/ Check the item in at another library
(with AutomaticItemReturn system preferences enabled)
2a/ Accept the transfer and note we now have a transfer present from the
items check-in library to it's home library
3/ Check the item in at a third library
3a/ Note you are asked to return the item to it's home library.
3b/ With the patch applied, the modal title should highlight that a
'Wrong transfer' was detected.
4/ Go to the item record and note the holding library has been updated
to reflect where the item was most recently checked in.
4a/ With the patch applied the item status should reflect the last
checked in branch as the 'from' branch of the transfer.
5/ check-in from a 4th library, but use the 'Print slip' option for
accepting the transfer and confirm that also works.
6/ check-in from a 5th library, but use the 'Cancel' option and check
that this results in the item staying at it's current location and the
final transfer having been cancelled.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch sets the transfer trigger to 'Reserve' when the staff user
confirms they are transfering to fulfil a reserve.
Test plan
1 - Place a hold for delivery at Library B
2 - Sign in at Library A
3 - Browse to Circulation->Transfers
4 - Attempt to transfer an item on the title with the hold to Library B
5 - You get a notice that hold was found
6 - You have the option transfer the for the hold - click it
7 - Confirm hold is set to transit and transfer generated
8 - Check the branchtransfers table and confirm the 'reason' is
'Reserve' not 'Manual'.
Signed-off-by: David Nind <david@davidnind.com>
JK: fix typo resver -> reserve
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This moves the DestinationEqualsHolding error message addition to if
clause so the value is added to %err hash only when there is actually
an error. Then we only append to the @errmsgloop array the error
message if one was defined.
To test:
1) Create a hold request to a pickup library where the item currently
is not
2) Add transfer to the pickup library using branchtransfers.pl and
notice without this patch we get and empty message box but with this
patch we don't get it.
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch prevents the cancellations we were seeing. Transfers were
being created pre-emtively for reserves in branchtransfers before the
librarian had selected their prefered action. As such, we were getting
double lines in the branchtransfers table.
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
These patches replace the 'Waiting' button on the transfers page with a 'Transfer' button
and correct some other related problem by passing the hold object to the template and
using that to fetch patron info as well as passing the reserve_id through to ensure the correct hold is
affected at all times
To test:
1 - Place a hold for delivery at Library B
2 - Sign in at Library A
3 - Browse to Circulation->Transfers
4 - Attempt to transfer an item on the title with the hold to Library B
5 - You get a notice that hold was found (missing patron/branch info)
6 - You have the option to set the hold waiting - click it
7 - The transfer is generated and marked completed
8 - The hold is marked as waiting, but the item is still at Library A and no transfer is active
9 - The patron is notified that the hold is waiting
10 - Revert the hold or cancel and place a new one
11 - Apply patches
12 - Attempt transfer again
13 - You now have the option to transfer the hold
14 - Click that
15 - Hold is in transit and transfer is generated correctly
16 - Transfer again and choose 'cancel'
17 - Confirm hold is cancelled and transfer generated
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch removes code and markup related to an autocomplete input
field in the overdues report filter. The autocomplete was intended
to enable easy entry of patron attributes, but it's simpler to use a
Select2-styled <select>
The patch removes circ/ypattrodue-attr-search-authvalue.pl, which was
only used on this page and is now obsolete.
To test, apply the patch and create at least one patron attribute type
which is linked to an authorized value:
- Administration -> Authorized values -> New category
- Create a new category to test with
- Add multiple authorized values under this category
- Administration -> Patron attribute types -> New patron attribute
type.
- Create an attribute which is linked to the authorized value
category you created AND which is marked "Searchable."
- Go to Circulation -> Overdues.
- In the sidebar filter you should see your patron attribute as an
option, styled as a Select2 dropdown.
- Clicking the dropdown should trigger a list of the authorized
values you created above.
- Test that the search field at the top of the list works correctly
to filter the results.
- Test that any repeatable attribute field can be cloned by clicking
the "Add" link, and that cloned fields can be removed using the
"Delete" links.
- Test that cloned fields remain in place after submitting the fitler
form, and that any selected entry in a Select2 widget is
preselected.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
On bug 15422 we made it so that only holds with copies to buy to acheive the holds ratio
showed
Users have reported that they want to see record where there are 0 copies to buy i.e.
the holds ration matches the value entered
This patch changes the criteria for returning holds to be if the ratio for a given title
is equal to or greater then the ratio specified in the form
I also renamed 'ratiocalc' to 'copies_to_buy' since that is what is contains
Test plan:
1. Create bibliographic records with 1, 2 and 3 items
2. Place 1 hold on each of them
3. Go to the Hold ratios report and search with ratio = 1, 2 then 3
4. You expect to see:
the title with 1 item with ratio 1
nothing otherwise
5. Place another hold on each of the record
6. Repeat 3 you expect to see:
titles with 1 or 2 items with ratio 1
title with 1 item for ratio 2
nothing with ratio 3
7. Place another hold on each of the record
8. Repeat 3 you expect to see:
titles with 1 or 2 or 3 items with ratio 1
title with 1 item or 2 items for ratio 2
nothing with ratio 3
9. Make sure there is no regression in the test plan of bug 15422
Comments from Frank Hansen:
Some comments.
When I adding the third hold on each record in step 7, It will result in
the following result:
titles with 1 or 2 or 3 items with ratio 1
title with 1 items with ratio 2 because the title with 2 items will get
a ratio of 1.50 and not 2.
title with 1 items with with ratio 3
Signed-off-by: Frank Hansen <frank.hansen@ub.lu.se>
Signed-off-by: Galen Charlton <gmc@equinoxinitiative.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch replaces the DeleteTransfer call in circ/returns.pl with a
call to Koha::Item::Transfer->cancel.
Test plan
1/ Check an item out
2/ Add a transfer request for the item to a second library
3/ Attempt to check the item in at the first library
4/ Note that you should be given a 'WrongTransfer' modal and have to
option to cancel.
5/ Cancel the transfer
6/ Check in the database that the transfer now has 'datecancelled' set.
7/ Add a transfer for the item again
8/ From the transferstoreceive page cancel the transfer
9/ Click cancel and again check that datecancelled is set in the
database for your transfer
Signed-off-by: Petro Vashchuk <stalkernoid@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 27896: (follow-up) Fix Typo
Signed-off-by: Petro Vashchuk <stalkernoid@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch update the controller to pass a full item object to the
template instead of a subset of item fields and updates the template to
utilise the object.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Using itemBarcodeFallbackSearch entering a barcode on checkout will do a keyword
search and provide you with a list of items matching the search term for checkout.
This allows checking out items, where there is no barcode in the item (you still need
a dummy barcode in Koha).
At the moment the table of items to choose from will only chow the title and the dummy barcode.
In order to make it more useful and easier to identify the correct item,
we should show more information here:
- callnumber (952$o)
- serial enumeration (952$h)
- copy number (952$t)
- inventory number (952$i)
(description copier from comment 0)
Test plan:
- Turn on itemBarcodeFallbackSearch
(If you have ES you need bug 27597)
- Check an item out using "street" or a search that will return several
items
- Note that you have now more info about the items
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
