When a booking is cancelled, patron received an email based on specific
letter.
Test plan:
1) Create a letter with code "BOOKING_CANCELLATION" on "Notices and
slips" tool.
2) Add booking or go on item already booked in advance.
3) Cancel it
4) Verify in message_queue table directly or go on patron page and click
on "Notices" tab section.
Sponsored by: Association de Gestion des Œuvres Sociales d'Inria (AGOS)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
If a notice doesn't already have any data in it we weren't able to use
the object to lookup the sample.. with this patch we now always load the
samples if they exist for each installed and enabled language,
regardless of whether there's already a notice stored in that language.
Test plan
1. Install Spanish by running koha-translate --install es-ES from inside
the kohashell
2. restart all
3. Set TranslateNotices to Allow
4. Verify that the Spanish-language sample_notices.yml exists
5. Open a notice that has at least one Spanish default notice defined
6. Confirm you see the 'View default' button for the spanish notice and
that the displayed notice is indeed the spanish translation
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds a modal to preview the sample notices in the UI and
allow replacing the template content with that content of that modal.
Test plan
1) Apply patches and restart plack (Or just use a sandbox)
2) Login to the staff client and navigate to 'Tools > Notices and Slips'
3) 'Edit' a notice.
4) Note the new 'View default' button on some notices where we ship a
default in the 'sample_notices' file.
5) Click the button to view the sample notice
6) Confirm 'Close' just closes the modal
7) Confirm 'Copy' copies the sample notice into the editor field
Signed-off-by: Emily Lamancusa <emily.lamancusa@montgomerycountymd.gov>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch adds the display of 'Default language' to the 'Default'
language in the notices editor tool.
This is so that librarians know which language they are expected to be
writing the notice in so we can remain consistent in both template and
include language used.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
This patch ensures saving styles per notice still works as expected when the TranslateNotices system preference is enabled.
To test, enable the TranslateNotices system preference and attempt to save different CSS for each installed language for one notice. Confirm the correct CSS is saved for the correct language.
Confirm the CSS selector helpers are inserted into the textarea as expected.
Confirm the 'Apply format settings to all notices for this language' setting works, as in CSS is saved for all relevant language notices.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Save format settings for an individual notice, or for all notices
This patch implements a single style field for a slip to allow for advanced CSS customisation of printed notices. There are links to insert selectors as helpers. Styles can be applied for an individual notice, or all notices.
To test:
1. Apply the patches, install database updates, update schema if needed, and restart services
2. Go to Tools -> Notices and slips
3. Edit any notice
4. Go to the Format tab
5. Confirm there is a textarea for CSS, and links to insert helpful selectors for IDs like #receipt and #slip
6. Add some CSS and confirm it saves.
7. Test that 'apply these settings to all notices' option works. Test the confirmation box appears when this is checked.
8. Add a new notice and confirm CSS settings save successfully
9. The subsequent patches have specific testing plans for each printable notice. For each, confirm that SlipCSS stylesheet changes are applied first. Specific notice styles should be applied last.
10. Test with a non-HTML notice as well, such as RECALL_REQUESTER_DET. Plain (non_HTML) notices have always come with <pre> tags around them so the text is formatted slightly differently but any CSS from SlipCSS or the notice Format should still hold.
Sponsored-by: Colorado Library Consortium
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
To test:
1. Go to Tools > Notices and slips
2. Pick any notice and try to copy it to another library using the 'Copy notice' column.
3. You are redirected to a blank screen and if you go back to the Notices and slips page the notice has not been copied.
4. APPLY PATCH
5. Try steps 1 - 3 again, but this time you should be correctly directed.
Signed-off-by: Roman Dolny <roman.dolny@jezuici.pl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
* Perltidied the section with tabs in printslip.pl
* Fixed indentation and tabs in letter.tt
* Added missing TT filters to members-toolbar.inc
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a new module to letters 'patron_slip' / Patrons toolbar
(slip)
This also combines some of the slip printing JS to make things more
direct
To test:
1 - Apply patch
2 - restart_all
3 - yarn build
4 - Confirm you can print slip, summary, quickslip, and checkin slip
when viewing a patron's account
5 - Enable DisplayClearScreenButton syspref, and test that it works
with both values
6 - Go to Tools->Notices and slips
7 - Define a new notice in the 'Patron toolbar (slip)' module
8 - Enter content like below in the 'Print' transport:
Patron has [% borrower.holds.count %] holds
List of holds:
[% FOREACH hold IN borrower.holds %]
===============================
Reserve id: [% hold.reserve_id %]
Title [% hold.biblio.title %]
[% END %]
9 - Go to patron scree
10 - Note new option under 'Print'
11 - Print the new slip and confirm it works (try with and without
placing holds for patron
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When creating a notice template the user has the option to add the borrower's
password to the template. This should be removed as the password should not be
an option to be added to a notice.
Test plan:
1) Navigate to Tools > Notices and slips
2) Either create a new notice or edit an existing notice
3) Observe that in the list of fields available to insert into the message body,
there is the option for "borrowers.password"
4) Apply patch
5) Navigate to the same menu
6) Observe that the "borrowers.password" option is now no longer visible
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch reduces the repetition in the tools/letter.pl controller
replaceing it with a try/catch block wrapping a call to
C4::Letters::_process_tt instead.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This is a follow-up to bug 31211. It adds the same INCLUDE_PATH
variables as C4::Templates adds during processing to prevent false
failures.
Test plan
1) Add an INCLUDE to any valid notice, for example:
[% INCLUDE 'patron-title.inc' patron => patron %]
2) Save and continue
3) Confirm you are faced with a validation error complaining that
the include file cannot be found
4) Apply this patch
5) Confirm that the reported error has dissapeared
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It would be useful for Koha to run a basic TT validation test and report back errors.
That way if somebody misses an END tag or something of that nature, it will be easy to find and fix.
Test Plan:
1) Apply this patch
2) Edit a notice, change the content to simply "[% END %]"
or some other invalid Template Toolkit
3) Choose "Save and continue editing"
4) Note the new "Template Toolkit error" field that displays the error
message
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
If the letter has been removed, fall back to itemnumber/due date. (Title is
no longer fetched.) We may assume that the notice is present.
Note: The option to 'protect' a notice may need some more thought. Perhaps
it needs to be an attribute on itself.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested by deleting notice, running fines again.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It would be great if we could customize what information was added to the "Description of charges" field when a fine was made so data could be stored even when the item is deleted.
Test Plan:
1) Create an overdue checkout that will get a fine
2) Run fines.pl
3) Note the description for the fine
4) Delete the fine from the database
5) Apply this patch
6) Run updatedatabase.pl
7) Restart all the things!
8) Run fines.pl
9) Note the description of the fine is unchanged
10) Delete the fine again
11) Browse to Slips & Notices
12) Edit the new notice OVERDUE_FINE_DESC
You will have access to the objects checkout, item, and borrower
13) Run fines.pl
14) Note your new description was used
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the notices edit interface in order to replace
jQueryUI accordion and tabs widgets with Bootstrap collapse and tabs.
To test, apply the patch and rebuild the staff interface CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- Set the TranslateNotices system preference to "Don't allow."
- Go to Tools -> Notices and edit any notice.
- On the "Modify notice" page you should see three collapsed sections:
Email, Print, and SMS.
- Clicking the section headings should expand and collapse the panels.
- With one of the panels open, click Save -> Save and continue editing.
- When the page reloads the same panel should be expanded.
- Enable the TranslateNotices system preference.
- Return to the edit interface for one of your notices.
- You should now see at least two tabs: Default and English.
- The sections under each tab should continue to work correctly.
- Test the "Save and continue" functionality again. When redirected you
should return to both the correct tab and the correct panel, e.g. the
"Print" section under the "English (en)" tab.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
See recalls on Intranet
- old recalls (all inactive recalls)
- recalls queue (all active recalls) - cancel, expire, revert waiting status, multiple cancel, mark overdue
- recalls to pull (available but not yet waiting) - cancel
- recalls awaiting pickup (awaiting pickup, awaiting pickup more than RecallMaxPickUpDelay days) - expire, revert waiting status
- overdue recalls (overdue to be returned) - cancel, multiple cancel
- biblio recalls tab (all active recalls relevant to this bib) - cancel, expire, revert waiting status, mark overdue
- patron recalls tab (all active recalls relevant to this patron) - cancel, expire, revert waiting status, mark overdue
- patron recalls history tab (all recalls relevant to this patron) - cancel, expire, revert waiting status, mark overdue
- log viewer
and the general circulation of recalls
== TEST PLAN FOR RECALLS ==
ADMINISTRATION
1. Apply all patches
2. Run database updates, update schema files and confirm everything applies cleanly
3. Run tests and confirm everything passes:
t/db_dependent/Koha/Recall.t
t/db_dependent/Koha/Recalls.t
t/db_dependent/Stats.t
t/db_dependent/Circulation/CalcFine.t
t/db_dependent/Koha/Item.t
t/db_dependent/Koha/Biblio.t
t/db_dependent/Koha/Patron.t
t/db_dependent/XSLT.t
t/db_dependent/Search.t
t/db_dependent/Holds.t
t/db_dependent/Circulation/transferbook.t
t/db_dependent/Circulation.t
4. Go to Administration -> system preferences. Find the UseRecalls system preference. It should be DISABLED. Confirm RecallsMaxPickUpDelay is set to 7 by default.
5. Go to Administration -> circulation rules. Confirm there are no recalls circulation rules showing.
6. Test a few circulation flows: checking out, placing a reserve, checking in, fulfilling a reserve, etc. Confirm everything works as normal.
7. Go to Administration -> system preferences. Enable the UseRecalls system preference.
8. Go to Administration -> circulation rules. Set the following rules:
Recalls allowed (count) = 0
Recalls per record (count) = 0
On shelf recalls allowed ( If any unavailable / If all unavailable ) = If any unavailable
Recall due date interval (days) = 3
Recall overdue fine amount = (something different to your normal fine amount)
Recall pickup period (days) = 1
Throughout your testing, try with different combinations of these rules and itemtype / branchcode / categorycode. Also try with null values. Keep the circulation rules open in another tab so you can refer to and update these easily. You should also have at least one other tab open for the staff client, and a third tab open for the OPAC, for ease of testing.
9. Go to your account -> More -> Set permissions. Confirm the recalls permission is checked.
10. Set up a test user with OPAC login details (Borrower A). This could also be your own user, as long as you have OPAC login access.
11. Set up a test record (Biblio A) with at least two items (Item A and Item B) of the same item type (or an item type with the same recall circ rules).
PLACING A RECALL
12. Log in to the OPAC as Borrower A. Do a catalogue search with a term that will return multiple results, including Biblio A.
13. Click on Biblio A.
14. Notice there is a 'Place recall' button on the sidebar menu. Click this button. There will be a message saying that there are no items to recall - this is because all items are available.
15. Check out Item A to another borrower (Borrower B).
16. Refresh the 'Place recall' page. You will still NOT be able to place a recall - this is because Recalls allowed = 0 and Recalls per record = 0.
17. Edit the circulation rules to have the following values:
Recalls allowed (count) = 1
Recalls per record (count) = 1
18. Refresh the 'Place recall' page. You will now see the form to place a recall.
BIBLIO-LEVEL RECALL, NO TRANSFER
19. Place a biblio-level recall.
Pickup location: Branch A, the set branch when you are logged into the staff client
Recall not needed after (expiration date): whatever you want
Select 'recall next available item'
Click confirm
20. Confirm the recall is placed successfully. Confirm that the new due date displayed is correctly calculated to be today's date, plus 3 days (taken from the 'recall due date interval' circ rule)
21. In the staff client, look at Borrower B's account, and go to their Notices tab. Confirm they have received a 'Notification to return recalled item' notice.
22. Look at Borrower B's checkouts table. Notice the due date for their checkout has been adjusted, and there is now a note to say that the item was recalled and the due date adjusted.
23. Log in to the OPAC as Borrower B and go to your summary tab. Notice there is a note under their checkout to say the item had been recalled.
24. Log out of the OPAC and log back in as Borrower A.
25. Go to your summary tab. Confirm there is a Recalls tab with a count of 1.
26. Cancel the recall using the button. Confirm it cancels and the Recalls tab disappears.
27. Do a catalogue search with a term that will return multiple results, including Biblio A.
28. When the results load, notice there is a 'Place recall' button next to the 'Place hold' button. Click this 'Place recall' button.
29. Notice you are redirected straight to the form to place a recall.
30. Place a biblio-level recall again, following the steps in Step 19.
31. Go to your recalls history tab. Notice your first cancelled recall shows here.
32. Cancel the recall you just created, using the button. Confirm it cancels and you are redirected to your summary tab.
33. In the staff client, enable the UseCourseReserves system preference.
34. Go to the main menu, click Course Reserves.
35. Add a new course. (You may also have to define an authorised value for DEPARTMENT.)
36. Add Item A as a reserve to this course.
37. View Course Reserves in the OPAC. Click the course you just created.
38. Notice the reserve has a Recall button underneath it's 'Checked out' status. Click this button.
39. Place a biblio-level recall again, following the steps in Step 19.
40. Click the 'Place recall' link in the breadcrumbs.
41. Notice there is a message saying that you have reached the max number of recalls on this record. This is because Recalls allowed = 1 and Recalls per record = 1.
42. Edit the circulation rules to have the following values:
Recalls allowed (count) = 10
Recalls per record (count) = 5
43. Refresh the 'Place recall' page. You will now see the form to place a recall.
44. Create another test record (Biblio B) with at least one item (Item C).
45. Find this record on the OPAC and place a biblio-level recall again, following the steps in Step 19.
46. In the staff client, go to Circulation -> Old recalls. You should be able to see your two cancelled recalls.
47. Go to Circulation -> Recalls queue. Your current recalls should show here.
48. Use the 'Select all' checkbox to select all recalls.
49. Cancel the recalls using the 'Cancel selected recalls' button.
50. Go to the OPAC and place a biblio-level recall on Biblio A again, following the steps in Step 19.
51. In the staff client, check in Item A, which should still be checked out to Borrower B.
52. A box should pop-up asking you to confirm Borrower A's recall. Click ignore.
53. Click the link to go view Biblio A's details in the catalogue.
54. Click the recalls tab. Notice Borrower A's recall is displayed, and shows it is still Requested (has not been confirmed waiting).
55. Check in Item A again. This time, confirm the recall as waiting using the "Confirm recall" button.
56. Go to Borrower A's Notices tab. Confirm there is a notice "Recalled item awaiting pickup".
57. Go to Borrower A's checkouts. Notice there is a recalls tab. Confirm the recall is showing as "Ready for pickup".
58. Click the 'Actions' dropdown. Click the "Revert waiting" button. The page should show a message that the waiting status has been reverted, without reloading.
59. This time, check in Item B. The recall confirmation box should show again, because this a biblio-level recall that any recallable item under Biblio A can fill. Click the "Print slip and confirm" button.
60. Check the slip that is generated. Confirm it contains Borrower A's correct details, and the details of the recall are correct.
61. Go to Circulation -> Recalls awaiting pickup. Confirm the recall is now waiting and shows in this list.
(You could also try this with Item B having a different item type to Item A, and circ rules not allowing Item B's item type to have recalls. When checking in Item A, it should not trigger the recall box).
62. Go to Borrower A's checkouts. Check out Item B.
63. Confirm the checkout is successful and the recall is removed from the Recalls tab.
64. Go to Circulation -> Old recalls. The fulfilled recall should show.
65. Check in Item B.
BIBLIO-LEVEL RECALL, TRANSFER REQUIRED
66. Check out Item A to Borrower B.
67. Log in to the OPAC as Borrower A.
68. Find Biblio A and place a biblio-level recall.
Pickup location: Branch B, a different branch from your logged in branch. This recall will require a transfer.
Recall not needed after (expiration date): whatever you want
Select 'recall next available item'
Click confirm
69. In the staff client, check in Item A at Branch A. Notice the box that pops up shows that a transfer is required.
70. Click "confirm recall and transfer" and confirm the transfer.
71. Go to your account and click the Recalls tab.
72. Confirm the recall status now shows the item is in transit to Branch B.
73. In the drop-down top-right of your window, select 'Set library'.
74. Set your library to Branch B.
75. Go to Circulation -> Transfers to receive. Notice that the recall is showing here.
76. Click 'Cancel transfer'.
77. Go to Circulation -> Recalls queue
78. Confirm the recall status has been reverted to Requested.
79. Set your library back to Branch A.
80. Check in Item A and trigger the transfer.
81. Set your library back to Branch B.
82. Check in Item A at Branch B.
83. When the 'Recall found' box pops up, click Ignore.
84. Go to Circulation -> Recalls to pull. The recall should show here, with a button to "Cancel recall and return to: Branch A"
85. Click the button to cancel the recall.
86. Repeat Steps 66-70.
87. Check in Item A at Branch B. Confirm the recall as waiting.
88. Check out Item A to Borrower A to fulfill the recall.
89. Set your library back to Branch A and check in Item A.
ITEM-LEVEL RECALL, NO TRANSFER
90. Go to Administration -> circulation rules. Set the following rules:
On shelf recalls allowed ( If any unavailable / If all unavailable ) = If all unavailable
91. Check out Item A to Borrower B.
92. Log in to the OPAC as Borrower A and go to Biblio A.
93. Click the 'Place recall' button. Confirm there is a message that there are no items to recall. This is because On shelf recalls allowed = If all unavailable, and there is still one item (Item B) available.
94. In the staff client, edit Item B to have a withdrawn, item lost or not for loan status.
95. Refresh the 'Place recall' page. Confirm you can now see the form to place a recall.
96. Place an item-level recall.
Pickup location: Branch A.
Recall not needed after (expiration date): whatever you want
Select 'recall a specific item'
Item B will not be selectable, and Item A should be selected by default.
Click confirm
97. In the staff client, edit Item B and remove the lost or missing status.
98. Check in Item B. Confirm the recall box does not pop up, because it cannot fill the item-level recall.
99. Check in Item A. Confirm the recall as waiting.
100. Go to Circulation -> Recalls awaiting pickup
101. Expire the recall. Confirm it expires as expected.
ITEM-LEVEL RECALL, TRANSFER REQUIRED
102. Repeat steps 91 to 95.
103. Place an item-level recall.
Pickup location: Branch B, we will require a transfer.
Recall not needed after (expiration date): whatever you want
Select 'recall a specific item'
Item B will not be selectable, and Item A should be selected by default.
Click confirm
104. In the staff client, check in Item A. Confirm the recall and trigger the transfer.
105. Set your library to Branch B and check in Item A.
106. Confirm the recall as waiting.
107. Check out Item A to Borrower A and fulfill the recall.
108. Set your library back to Branch A and check in Item A.
CRONJOBS: EXPIRING RECALL
109. Check out Item A to Borrower B.
110. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
111. In your terminal, enter mysql and edit the expiration date of your recall to be before today
UPDATE recalls SET expirationdate = NOW()-2 WHERE recall_id = X;
112. Run the expiry cronjob from within your shell
perl misc/cronjobs/recalls/expire_recalls.pl
113. Go to Borrower A's account and go to the Recalls history tab
114. Confirm the recall has been expired because the current date surpassed the specified expiration date
115. Check out Item A to Borrower B.
116. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
117. In the staff client, check in Item A and confirm the recall as waiting.
118. In your terminal, enter mysql and edit the waiting date of your recall to be before today
UPDATE recalls SET waitingdate = NOW() - interval 5 day WHERE recall_id = X;
119. Run the expiry cronjob from within your shell
perl misc/cronjobs/recalls/expire_recalls.pl
120. Go to Borrower A's account and go to the Recalls history tab
121. Confirm the recall has been expired because the recall had been waiting for more days than the Recall pickup period
122. Go to Administration -> circulation rules. Set the following rules:
Recall pickup period (days) = 0
123. Set the RecallsMaxPickUpDelay system preference = 1.
124. Check out Item A to Borrower B.
125. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
126. In the staff client, check in Item A and confirm the recall as waiting.
127. In your terminal, enter mysql and edit the waiting date of your recall to be before today
UPDATE recalls SET waitingdate = NOW()-2 WHERE recall_id = X;
128. Run the expiry cronjob from within your shell
perl misc/cronjobs/recalls/expire_recalls.pl
129. Go to Borrower A's account and go to the Recalls history tab
130. Confirm the recall has been expired because the recall had been waiting for more days than the RecallsMaxPickUpDelay syspref
CRONJOBS: OVERDUE RECALL
131. Check out Item A to Borrower B
132. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
133. In your terminal, enter mysql and edit the due date of the checkout to Borrower B to be before today
UPDATE issues SET date_due = NOW()-2 WHERE issue_id = X;
134. Run the overdue cronjob from within your shell
perl misc/cronjobs/recall/overdue_recalls.pl
135. Go to Circulation -> Overdue recalls
136. Confirm your recall is showing here now as the recall has been marked Overdue
CIRCULATION
137. Check in Item A.
138. When the recall box pops up, click Ignore.
139. Check out Item A to Borrower B. You should see a yellow confirmation box, saying that another borrower has recalled the item you are trying to check out.
140. Click "No don't check out" and confirm the item isn't checked out and the recall remains.
141. Repeat Step 139.
142. Click "Yes check out" and confirm the item is checked out and the recall remains.
143. When Borrower B's checkout table loads, confirm that you cannot renew or check in the item from the Checkouts table because there is a 'Recalled' link which takes you to the recalls tab for that biblio.
144. Repeat Steps 137-139.
145. Select "Cancel recall" and click "Yes check out" and confirm the item is checked out and the recall has been cancelled.
146. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
147. Check in Item A. Confirm the recall as waiting.
148. Check out Item A to Borrower B. You should see a yellow confirmation box, saying that that another borrower has recalled the item that you are trying to check out.
149. Select "Revert waiting status" and click "Yes check out" and confirm the item is checked out and the recall status has reverted to requested.
OTHER
150. In your terminal, enter mysql and edit the due date of the checkout to Borrower B to be before today
UPDATE issues SET date_due = NOW()-2 WHERE issue_id = X;
151. Go to Borrower A's recalls and click the Actions dropdown.
152. Click "Mark as overdue" and confirm the recall is marked as overdue manually.
153. Go to Tools -> Log Viewer. Check only the Recalls module, and leave all other parameters, and click Submit.
154. Confirm all of the recalls actions that have been made are correctly logged.
Note: recalls messaging preferences are introduced in Bug 23781.
The recall feature is fully documented at: https://wiki.koha-community.org/wiki/Catalyst_IT_Recalls
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
One big patch for one big move.
The "News" feature (opac_news) has been hijacked to handle some system
preferences (bug 26050). The goal was to take profit of the UI (editor)
and the ability to translate the value.
Disclaimer: This patch is NOT offering the best implementation but, as
we still don't have bug 24975, it cannot be done now. And no, we don't
want to wait for it to move forward here. This patch is going into the
right direction anyway.
This enhancement is going to rename the "News" with a more genertic
"Additional contents". We have two different "categories" of content:
"news" and "html customizations".
What does it bring?
- A split on the UI for disambigate the two types of content (news and
syspref/html customizations)
- A simplification of the edit form: all languages will be translatable
on the same view (like the "notice templates")
- Ground will be prepared for different types of content (if needed later)
- Staff news can be translated
How was the "News" area working before this patch?
The opac_news DB table contained a (very inconsistent) 'lang' column.
The different values were:
- '' => news to display at the OPAC and staff interfaces
- 'koha' => news for staff only
- 'slip' => news for slip notices
- $lang => news for OPAC only, translated in $lang ('en', 'es-ES', etc.)
- "$location_$lang" => A syspref moved to this "news" area. The syspref
is $location, and is translated in $lang. Eg. OpacLoginInstructions_en,
OpacLoginInstructions_fr-FR, opacheader_es-ES
This patch is improving the DB structure with the following changes:
- renaming 'opac_news' with 'additional_contents'
- new 'category' column
=> 'news' or 'html_customizations'
- new 'location' column
=> For 'news': 'staff_and_opac', 'staff_only', 'slip'
=> For 'html_customizations': the old syspref name (eg. 'OpacLoginInstructions').
- new 'code' column (see later for more info)
- the 'lang' column will only contain the language code ('en', 'es-ES',
etc.). BUT a 'default' entry will ALWAYS exist for fallback behaviour.
We are getting closer to the 'notice template' table structure because
we want to match its UI. The 'code' column will bring us the ability to
group the different 'additional_contents' rows. The code for a given
news will be the same, but the (lang, title, content) will differ.
Examples:
News 1 will have, for each of the translated versions
(category, code, location, branchcode)
('news', 'News1', $location, $branchcode||undef)
And the 3 following columns will differ:
(title, content, lang)
('title for news 1', 'content for news 1', 'default')
('titulo para 1', 'contenido para 1', 'es-ES')
Note that the "category" is not strictely necessary, but it seems better
to have the ability to split the different content by category/type
easily.
Additional changes:
- Syspref 'NewsToolEditor' is renamed 'AdditionalContentsEditor'
- Koha::NewItem => Koha::AdditionalContent
- Koha::News => Koha::AdditionalContents
- Script and template renamed from koha-news to additional-contents
- Foreign keys have been renamed
- Subpermission edit_news has been renamed edit_additional_contents
- The UI can now be accessed via a "News" or "HTML customizations" link
from the tools module. The related contents will then be displayed (both
categories are now split)
Changes not done here:
- Primary key 'idnew' could be renamed 'id'
Limitations of the upgrade:
News cannot be grouped by a unique code for existing translations.
=> A given news will be now displayed several times on the translated
interface
Any ideas to improve the upgrade behaviour?
We will have to add a warning in the release notes to tell libraries to
review their news.
Test plan:
0. Don't apply the patches
1. Translate the interfaces in some languages
. Create some news for staff and OPAC
. Create some content for different entry of HTML customizations
Note that you are forced to define a 'default'.
Also note that you are only forced to fill the title (not the content).
This is certainly problematic (see FIXME in the code) as sometime only
the content is displayed.
. Play with the interface (edit, delete, filter)
. Go to the different places the news are displayed, and confirm they
are displayed correctly (staff home, opac home, opac rss)
. Create 1+ news for 'slip', check an item out and 'print slip' (from
the circulation page). You must see the news.
. Go to the different places you are expecting the HTML customizations
to be present and confirm that you see them.
. Switch the lang of the interface and confirm that you now see the
content in the translated version
. Generate the templates in another language, don't translate the
content
. Use this language for the interface and confirm that the 'default'
version is displauyed.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
On bug 17591 we discovered that there was something weird going on with
the way we export and use subroutines/modules.
This patch tries to standardize our EXPORT to use EXPORT_OK only.
That way we will need to explicitely define the subroutine we want to
use from a module.
This patch is a squashed version of:
Bug 17600: After export.pl
Bug 17600: After perlimport
Bug 17600: Manual changes
Bug 17600: Other manual changes after second perlimports run
Bug 17600: Fix tests
And a lot of other manual changes.
export.pl is a dirty script that can be found on bug 17600.
"perlimport" is:
git clone https://github.com/oalders/App-perlimports.git
cd App-perlimports/
cpanm --installdeps .
export PERL5LIB="$PERL5LIB:/kohadevbox/koha/App-perlimports/lib"
find . \( -name "*.pl" -o -name "*.pm" \) -exec perl App-perlimports/script/perlimports --inplace-edit --no-preserve-unused --filename {} \;
The ideas of this patch are to:
* use EXPORT_OK instead of EXPORT
* perltidy the EXPORT_OK list
* remove '&' before the subroutine names
* remove some uneeded use statements
* explicitely import the subroutines we need within the controllers or
modules
Note that the private subroutines (starting with _) should not be
exported (and not used from outside of the module except from tests).
EXPORT vs EXPORT_OK (from
https://www.thegeekstuff.com/2010/06/perl-exporter-examples/)
"""
Export allows to export the functions and variables of modules to user’s namespace using the standard import method. This way, we don’t need to create the objects for the modules to access it’s members.
@EXPORT and @EXPORT_OK are the two main variables used during export operation.
@EXPORT contains list of symbols (subroutines and variables) of the module to be exported into the caller namespace.
@EXPORT_OK does export of symbols on demand basis.
"""
If this patch caused a conflict with a patch you wrote prior to its
push:
* Make sure you are not reintroducing a "use" statement that has been
removed
* "$subroutine" is not exported by the C4::$MODULE module
means that you need to add the subroutine to the @EXPORT_OK list
* Bareword "$subroutine" not allowed while "strict subs"
means that you didn't imported the subroutine from the module:
- use $MODULE qw( $subroutine list );
You can also use the fully qualified namespace: C4::$MODULE::$subroutine
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
There is a "debug" parameter we are passing from the controller scripts
to C4::Auth::get_template_and_user, but it's not actually used!
Test plan:
Confirm the assumption
Review the changes from this patch
Generated with:
perl -p -i -e 's#\s*debug\s*=\>\s*(0|1),?\s*##gms' **/*.pl
git checkout misc/devel/update_dbix_class_files.pl # Wrong catch
+ Manual fix in acqui/neworderempty.pl
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The way we handle notice templates is confusing (see bug 27660, bug 26787, bug 28487).
This patch remove C4::Letters::getletter and use either Koha::Notice::Templates->find
or the newly created methods ->find_effective_template that will do
all necessary to return the correct template.
Test plan:
- Create and modify notice templates
- Make sure you have TranslateNotices turned on and that some notices
templates have a translated version
- Use holds_reminder.pl and overdue_notices.pl cronjobs and confirm that
the generated notices are the expected ones
- Test also pos/printreceipt.pl
- And finally test some other notices (CHECKIN, RENEWAL for instance)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
[EDIT] Amended by removing comment for $params={%$params}
JD amended patch:
* Add missing POD
* Fix spelling (dont ==> don't)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This enhancements adds support for logging changes to notices and slips.
Features include:
- a system preference (NoticesLog) which allows you to enable logging changes for notices and slips
- logging new notices, changes to notices, and deletion of notices
- filtering in the log viewer so you can show all changes for a specific notice
- a comparison feature, so you can see what changes were made to a notice.
Test plan:
1/ Add some 'Notice' action logs by adding a new notice or updateing an
existing notice
2/ Go to the 'Log viewer' under 'Tools'
3/ Note you can filter by 'Notices'
4/ Confirm the changes you made appear in the logs and that the 'Object'
field links back to the updated notice ready for editing.
1/ Make some changes to at least two different notices to trigger logs
2/ Go to the 'Log viewer' from 'Tools' and filter on 'Notices'
3/ Note, you can now see the 'Compare' checkbox option for these logs
4/ Select the checkbox on one of the notices and note that the results
are now filtered by that specific notice.
5/ Select a second checkbox to expose the option to 'View comparison'
6/ Click 'View comparison' to see the 'Diff view' of the two notices.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This QA follow-up allows access to the old_issues table when editing the
notice in Tools.
Signed-off-by: Alexandra Speer <alexandra.speer@bsz-bw.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Christian Stelzenmüller <christian.stelzenmueller@bsz-bw.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Here we're just adding ILL notices to the existing "letters"
infrastructure so notices can be displayed and edited
Sponsored-by: PTFS Europe
Signed-off-by: Niamh Walker-Headon <Niamh.Walker-Headon@it-tallaght.ie>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This add an 'udated_on' column to the letter table and displays
the information in 'slips and notices'.
To test:
- Apply patch
- Run updatedatabase
Note: the existing letters will all be set to the
currnet date).
- Go to Tools > Notices and slips
- Verify there is a new column "Last updated" in the table
Note: The table will always display the newest change date
of the different message transport types.
- Edit any notice
- Verify the "Last updated" is shown for any transport type
with an existing notice definition
- Edit and add a notice
- Verify the dates are correctly stored
- Test the column configuration for the new column works
correctly
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It defaults to 0 in get_template_and_user
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a .perlcriticrc (copied from qa-test-tools) and fixes
almost all perlcrictic violations according to this .perlcriticrc
The remaining violations are silenced out by appending a '## no critic'
to the offending lines. They can still be seen by using the --force
option of perlcritic
This patch also modify t/00-testcritic.t to check all Perl files using
the new .perlcriticrc.
I'm not sure if this test script is still useful as it is now equivalent
to `perlcritic --quiet .` and it looks like it is much slower
(approximatively 5 times slower on my machine)
Test plan:
1. Run `perlcritic --quiet .` from the root directory. It should output
nothing
2. Run `perlcritic --quiet --force .`. It should output 7 errors (6
StringyEval, 1 BarewordFileHandles)
3. Run `TEST_QA=1 prove t/00-testcritic.t`
4. Read the patch. Check that all changes make sense and do not
introduce undesired behaviour
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We certainly faced 3 similar bugs due to this syntax: bug 23006, bug
22941 and bug 17526.
To prevent other issues related to this syntax this patch suggests to
replace them all in one go.
Test plan:
Confirm that the 2 syntaxes are similar
Eyeball the patch and confirm that there is no typo!
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To test:
1.Enable multi-languages
2.Set the preference 'TranslateNotices' on 'Allow'
3.Go to: tools==>Notices & slips==>Edit (one notice)
4.Click on the "Email" in the Default, uncheck the checkbox for 'HTML Messages'.
5.Save
6.Reopen the notice, nothing changed.
7.Apply the patch
8.Repeat the steps 4 and 5
9.Success.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This patch modifies the Notices edit process so that if the user chooses
the "Save and continue" option the page reloads with the same panel open
which they were previously editing in.
To test, apply the patch and go to Tools -> Notices and Slips.
- Open a notice for editing.
- Expand one of the sections.
- Choose "Save and continue" from the button menu in the toolbar.
- When the page reloads, the section you expanded should be open
again.
- Test each section and test with no sections expanded.
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
To reproduce warns:
1) Go to Tools -> Notices & slips
2) Create a new notice of any module
Notice these warns:
Use of uninitialized value $code in regexp compilation at
/home/vagrant/kohaclone/tools/letter.pl line 265.
Use of uninitialized value $code in regexp compilation at
/home/vagrant/kohaclone/tools/letter.pl line 265.
Use of uninitialized value $code in regexp compilation at
/home/vagrant/kohaclone/tools/letter.pl line 265.
CGI::param called in list context from package
CGI::Compile::ROOT::home_vagrant_kohaclone_svc_letters_get line 50, this
can lead to vulnerabilities. See the warning in "Fetching the value or
values of a single named parameter" at /usr/share/perl5/CGI.pm line 436.
CGI::param called in list context from package
CGI::Compile::ROOT::home_vagrant_kohaclone_svc_letters_get line 50, this
can lead to vulnerabilities. See the warning in "Fetching the value or
values of a single named parameter" at /usr/share/perl5/CGI.pm line 436.
3) Create a new notice of the Circulation module
Notice this additional warn:
Use of uninitialized value $code in pattern match (m//) at
/home/vagrant/kohaclone/tools/letter.pl line 258.
To test:
4) Apply patch and refresh page
5) Run steps 1-3 again and confirm no warns show
Sponsored-by: Catalyst IT
Signed-off-by: Maryse Simard <maryse.simard@inlibro.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Caused by
commit 0cffb0f758
Bug 21621: Remove incorrect GROUP BY from tools/letter.pl
The test plan was not complete enough.
Test plan:
1) Go to Home › Tools › Notices & slips
2) Choose a letter to edit, e.g. PREDUE. Note that there is only a
single row.
3) Click the edit button on the notice.
4) Expand the 'Print' section. Put text into the Message subject and
Message body text areas.
5) Click save, this will take you back to the 'Notices & slips' page.
6) Clone PREDUE for a specific library
7) The 'all libraries' option must list the templates for all libraries,
but without duplicate
8) Select a library in the dropdown list: only the templates for the
given library is listed, without duplicate
Signed-off-by: Barton Chittenden <barton@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Fix:
'koha_kohadev.letter.name' isn't in GROUP BY
DBD::mysql::db selectall_arrayref failed: 'koha_kohadev.letter.name' isn't in GROUP BY [for Statement "SELECT branchcode, module, code, name, branchname
FROM letter
LEFT OUTER JOIN branches USING (branchcode)
GROUP BY branchcode,module,code ORDER BY module, code, branchcode"] at /home/vagrant/kohaclone/tools/letter.pl line 383.
Test plan:
- Copy some default notice templates for specific libraries
- List the different notice templates
- Confirm that notices appear only one, with "all libraries" you will see all
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This fixes 2 related problems:
1) The editor only offered 3 entries from biblio for adding to the notice:
title, author, serial
It was not clear that actually all fields from biblio can be used.
2) It was not possible to use fields from biblioitems in the notices
which left out important fields like the ISSN.
The patch adds the biblioitems table and changes the editor to show
all entries from biblio and biblioitems table are shown on the left.
To test:
- Create a subscription
- Generate next issue a few times to get late issues
- Create a new notice in the "Claim serial issue" module
- Use fields from different/all tables
- Make sure an email address is set for
- the vendor (also check for 'receives claims for late issues')
- your staff user
- Go to serials > claims
- Claim multiple issues
- Verify the email is generated and contains the correct information
Example notice:
Title: <<biblio.title>>
Author: <<biblio.author>>
ISSN: <<biblioitems.issn>>
ISBN: <<biblioitems.isbn>>
Issue: <<serial.serialseq>>
--
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
0) Apply the patch
1) Do not have any patron attribute types defined
2) Go to Tools -> Notices and slips
3) Edit any slip/letter which uses table borrower
4) Confirm the editing works, and the slip/letter itself works
5) Add some patron attributes types and define them a value for any
patron
6) Go to Tools -> Notices and slips and edit any slip/letter which uses
table borrower
7) Confirm, the attributes are listed in available fields
8) Confirm the slip/letter is working when you add a attribute to it
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch is a first step to provide a preview mode for notice
templates.
CHECKIN, CHECKOUT and HOLD_SLIP are supported so far.
Maybe more, but I have not tested yet and the interface will not allow
you to generate the preview.
The idea is to provide an idea of how will render the messages generated
from a notice template.
A new "Preview" button is added close to each textarea on the editing
notice templates view.
For each notice template code (letter_code), we will need some input
data to produce the preview.
For instance, for CHECKIN we need an barcode. From the barcode we
can guess all the other data.
For CHECKOUT we will need the borrowernumber and the barcode.
Note that the way to enter the data for the preview is not really
user-friendly, for CHECKOUT you will have to fill
'borrowernumber|barcode', but the placeholder will help you to know how
and what to fill.
In the modal window, you will see 4 blocks:
1/ the content of the letter (with the placeholds << >>)
2/ the generated message (with the data filled)
3/ if the letter contained historical syntax markers, the screen will
try to generate a notice template using the TT syntax
4/ the generated message from this TT syntax
=> You will be able to compare the 2 generated messages.
What is the goal of this first patchset:
- Show this first POC and get feedback from other developpers
- Add a way to easily visualise the differences between the 2 syntaxes
- Confort users with the TT syntax and the migration step from the
historical syntax.
I'd like to get opinions before going further.
The possibilities:
- Mock data to get fully working generated messages for any notice
templates. For instance, for CHECKIN and CHECKOUT, the item is not
checked in/out yet. So we cannot access the issue's information.
(I have no idea how to do that)
- Browse the data to get the ones we want to use for the preview (big).
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
Check that the following files don't contain use strict; use warnings;
and have use Modern::Perl instead.
background-job-progress.pl
batchMod.pl
copy-holidays.pl
exceptionHolidays.pl
holidays.pl
import_borrowers.pl
koha-news.pl
letter.pl
manage-marc-import.pl
newHolidays.pl
overduerules.pl
quotes-upload.pl
quotes.pl
quotes/quotes-upload_ajax.pl
quotes/quotes_ajax.pl
scheduler.pl
stage-marc-import.pl
upload-cover-image.pl
Also the credits have been added to newHolidays.pl
Signed-off-by: Jon Knight <J.P.Knight@lboro.ac.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Avoid the following error:
DBD::mysql::db do failed: Duplicate entry
'acquisition-xxx--email-default' for key 'PRIMARY' [for Statement "
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds an option to "Save and continue editing" when editing
notices. The submit button is now a split button in a floating toolbar.
The secondary action of the split button is "Save and continue editing."
To test, apply the patch and go to Tools -> Notices.
- Open any notice for editing. Verify that the toolbar looks correct and
floats as it should when sections of the form are expanded and the
page scrolls.
- Edit a notice and click the "Save" button. Confirm that you are
redirected to the main Notices page and that your changes were saved.
- Edit a notice and click the "Save and continue editing" menu item.
The page should reload with your updates in place.
Signed-off-by: NickUCKohaCon17 <nicansjr@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If the pref is on, the notice template will be translatable in different
languages
Sponsored-by: Orex Digital
Signed-off-by: Hugo Agud <hagud@orex.es>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
With this patch it will be possible to send order information
to the vendor by e-mail. For now this feature can be triggered
manually with a button before closing the basket.
The order e-mail is based on the acquisition claim feature, but
uses a new notice template.
Test plan:
1) Vendors
A new checkbox "Contact when ordering?" was added to the vendor
page.
- Add a vendor and/or edit an existing vendor
- Verify the new option is saved correctly
- Verify the new option displays on the vendor summary page
after saving
2) Notices
The feature works with a new notice template: ACQORDER
It works with the same formatting/fields etc. as the acq claim
notice.
- Add a new notice template ACQORDER in module
'Claim/order aquisition'
- Make sure to use fields from the various offered tables
in your notice
- Verify it is saved correctly
3) Basket
- Turn on LetterLog system preference
- Create multiple order lines
- Click the 'Send order' button in the toolbar
- Verify error or success message
- Verify you received the e-mail
- Verify there is a new entry with about the sent
notice in your action_logs table
4) Regression testing...
- Verify order claims still work
- Verify serial claims still work
- Verify new serial issue notices still work
...
(I can provide additional test plans if needed)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jennifer Schmidt <jschmidt@switchinc.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
