This patch remove the private sub used in GetIssuingCharges in favor
of get_effective_rule
It corrects the wrong precedence for rules and adds tests to cover this
subroutine
NOTE: the 'branch' for the discount will be determined by the signed in branch,
this is a bug to be fixed in the future
To test:
1 - Define a rentalcharge for an itemtype
2 - Define a 10% discount for library A, category A, all itemtypes
3 - Define a 50% discount for all libraries, category A, same itemtype
4 - Attempt to checkout an item from library A of the matching itemtype
5 - The 50% discount is applied
6 - Apply patches
7 - Attempt to checkout an item from library A of the matching itemtype
8 - The 10% discount is applied
prove -v t/db_dependent/Circulation.t
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
- It is a required module. If it is missing, Koha will not start
- Set the minimum version to 2.00. While not strictly required, it's the
version that states that "Deprecation of Readonly::XS as a requirement
for fast, readonly scalars is complete", it is available in Debian
oldoldstable (jessie, 8), and Readonly::XS was not even needed with Perl
> 5.8, which allows us to:
- Remove dependency on Readonly::XS
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Run t/db_dependent/ILSDI_Services.t with and without previous patches
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Actually, the GetRecords service gives many information :
borrowernumber (reserves field)
The issue data should not be sent by these service, its a privacy problem.
Test plan :
1) Enable ILS-DI webservice
2) Place hold on an item
3) Go to {opac}/cgi-bin/koha/ilsdi.pl?service=GetRecords&id={biblionumber}
4) Check the reserves tag content
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Actually, the GetRecords service gives many information :
bibliographic data (marcxml field)
item data (items field)
issue data (issues field)
The issue data should not be sent by these service, its a privacy problem.
Biblio title and author are redundant.
This patch changes to use Koha::Checkouts to get issues informations with only the addition of item barcode.
Test plan :
1) Enable ILS-DI webservice
2) Checkout an item
3) Go to {opac}/cgi-bin/koha/ilsdi.pl?service=GetRecords&id={biblionumber}
4) Check the issues tag content
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When a staged MARC file is used to populate a basket in acquisitions,
the status of the batch is kept as "staged" until a user repeat the operation.
The "imported" status is added to the batch when new orders are added to
a basket "from a new file" (yes!...)
Test plan:
- Create a basket
- Add to basket From a New File
- Select a marc file and stage
- Add titles to your basket
Until all your records are imported the batch will have the status
"staged"
When all your records will be imported, the status of the batch will be
"imported"
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Valid characters are alphanumeric characters (a-zA-Z0-9), hyphen (-)
and underscore (_)
https://www.w3.org/TR/CSS21/syndata.html#value-def-identifier
All invalid characters will be replaced by '_'
Test plan:
1. Go to Administration » System preferences and click on 'Searching'
tab
2. You should see a console error (Uncaught Error: Syntax error,
unrecognized expression: #collapse_Did_you_mean/spell_checking)
3. Apply patch
4. Make sure the error is gone
5. prove t/Koha_Template_Plugin_HtmlId.t
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Replace "enqueued_on" with "Enqueued on", same for started_on and
ended_on
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If no firstname is defined for a relative, the "Relative's checkouts"
tab will be "processing" forever.
JS error:
TypeError: oObj.borrower.firstname is null
Test plan:
1 - Create a patron (PatronA) in a category with type 'Org'
'School' in sample data works
2 - Add a guarantee (Patron B)
3 - Check out an item to PatronA
4 - Go to PatronB's record and click relativwe's checkouts
5 - There is an error and the table doe snot load
6 - Apply patch
7 - Reload
8 - Table loads correctly
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch flushes the L1 cache on each Z3950 server search.
There is no need to flush it in init_handler (when the connection is
made), the L1 cache is not accessed (this behaviour goes against what I
expected).
This means each search will fetch values from the
L2 cache (ie memcached) and persist the L1 cache (in Perl
memory cache) until the result are returned (or longer?).
Test plan:
% perl misc/z3950_responder.pl --config-dir=/kohadevbox/koha/etc/z3950
% zoomsh
ZOOM>connect localhost:2100
ZOOM>set databaseName biblios
ZOOM>search x
ZOOM>search x
Between the 2 searches you can modify the value of SearchEngine, you
will notice that the number of hits is different
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Mana system preference type 'YesNo' is wrong since it has 3 values.
Change to 'Choice'
Test plan :
1) Run atomic update
2) Check in database 'Mana' system preference type is 'Choice'
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To see the 'In transit from' and 'to' fields in an Opac basket we have :
<span class="item-status intransit">In transit from [% Branches.GetName( item.transfertfrom ) | html %]
to [% Branches.GetName( item.transfertto ) | html %] since [% item.transfertwhen | $KohaDates %]</span>
But in koha-tmpl/opac-tmpl/bootstrap/en/includes/item-status.inc we have no :
[% USE Branches %]
This patch just corrects this lack
Test plan:
1° find an item in a transit status or create one with this status
2° put it in an Opac basket
3° note that in the location column of the Opac basket the 'In transit from' and 'to' fields are empty.
4° apply the patch
5° check again and validate that the 2 fields are now filled
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When a superlibrarian is logged in, C4::Auth::get_template_and_user pass the CAN_user_$flag to the template, but some are missing:
suggestions, lists, cash_management
So far they are not used in the template but it will avoid a developer to spend time on it if we fix it now.
Test plan:
Compare with installer/data/mysql/mandatory/userflags.sql
Note that we don't need selfcheck
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The select/unselect all links took into account only the items displayed
when the page was loaded (so 20).
Test plan:
1. Go to Tools-> Inventory-> Do a Search to produce more than 20 results
2. Select 50, 100 or All entries to show
3. click on Select All
=> All items must be selected, not only the first 20
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
UsageStatsCountry system preference type 'YesNo' is wrong since it has
several values.
Change to 'Choice'.
Looks like this error whas only in updatedabase 3.17.00.030.
Test plan :
1) Run atomic update
2) Check in database 'UsageStatsCountry' system preference type is
'Choice'
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
In item search CSV export, data cells are exported with double quotes.
There should also be double quotes in header cells.
Also some spaces can be removed.
Delimiter must be from system preference 'delimiter'.
TT filter must be $raw not html, only double quotes must be espaped by
duplication of it.
This may help to open the CSV with any table/calc software.
Test plan :
1.0) Create a record with title : Laurel & "Hardy"
1.2) Create an item on this record
2.0) Without patch
2.1) Perform an item search on title 'Laurel'
2.2) Export as a CSV file and save the file locally
2.3) Open the file with a table/calc software
3.0) Apply patch
3.1) Perform same item search
3.2) Export as a CSV file and save the file locally
3.3) Open the file with a table/calc software
4.0) Compare files with diff/meld
=> you see double quotes arround header cells
and removal of space after coma
4.1) Check that delimiter is from system preference 'delimiter'
4.2) In table/calc software they should look the same
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
In Koha::Patron is_valid_age the is a compare : $age < $low
But $low may be undef.
It generates a warn :
Use of uninitialized value $low in numeric lt (<)
Needs a test like for $high.
Test plan :
1) Run prove t/db_dependent/Koha/Patrons.t
2) Edit a patron catetory, empty "Age required" and save
3) Edit a patron of this category
4) Check in logs you don't see "Use of uninitialized value $low in numeric lt (<)"
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the USE TablesSettings directive which allows the plugin
to be invoked to fill the columns_settings_borrowers_table variable.
Test plan:
0. Do not apply the patch
1. Go to http://localhost:8081/cgi-bin/koha/reserve/request.pl?borrowernumber=51&biblionumber=29
2. View source on the page and note columns_settings_borrowers_table has no value assigned
2. Apply the patch
3. In a new tab, go to http://localhost:8081/cgi-bin/koha/reserve/request.pl?borrowernumber=51&biblionumber=29
4. Note that nothing has changed on the surfeace
5. View source ont he page and note columns_settings_borrowers_table now has a value assigned
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To prevent
DBD::mysql::db begin_work failed: Already in a transaction at /usr/share/perl5/DBIx/Class/Storage/DBI.pm line 1588, <GEN45> line 1.
Test plan:
1 - Export more than 100 records
2 - Use bulkmarcimport (with -commit=10) to import them
perl misc/migration_tools/bulkmarcimport.pl -b -file testbmi.xml -v -m=MARCXML --commit=10
3 - Modify a record to make the import fail (for instance having a too long
lccn)
4 - Use bulkmarcimport (with -commit=10) to import them
perl misc/migration_tools/bulkmarcimport.pl -b -file testbmi.xml -v -m=MARCXML --commit=10
5 - Notice that the import stops but that the imported record are imported (apart from the last batch of 10)
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1 - set AllowHoldItemTypeSelection to 'Allow'
2 - Find a patron from Library A
3 - Find a record with an item from Library A
4 - Place a title level hold with itemtype specified for a delivery at Library A for patron and record above
5 - perl misc/cronjobs/holds/build_holds_queue.pl
6 - There are warns:
Use of uninitialized value in hash element at /kohadevbox/koha/C4/HoldsQueue.pm line 523.
Use of uninitialized value in string eq at /kohadevbox/koha/C4/HoldsQueue.pm line 523
7 - Apply this patch
8 - perl misc/cronjobs/holds/build_holds_queue.pl
9 - No more warns!
10 - prove -v t/db_dependent/HoldsQueue.t
11 - All tests pass!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This warn only appears when:
The borrower and item branches match
AND
The hold fulfillment policy is any or the pickupbranch matches the items branch specified by hold_fulfillment_policy
AND
The request has an itemtype set
To trigger we simply add some itemtype to existing hold requests in the test
To test:
1 - prove -v t/db_dependent/HoldsQueue.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We shouldn't rely on knowing exactly which ISBNs we get, we should specifically
check for what we do or don't expect.
I believe we should return biblios that have the same isbn we passed, as it signlas we have another
biblio in the catalog that matches the one we are on.
To test:
prove -v t/db_dependent/XISBN.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
I don't know, if we get rid fo this check we can now check the db for the same isbn we passed
This may be useful as we may want to see the biblio with the same isbn as long as number is different?
This will make tests fail
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
$response_data is a hash with one key, content
Why are we checkiing it against a string?
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The test here was returning 0590353403 when searched for 9780590353403
because of the regex matching
Koha doesn't work this way unless SearchWithISBNVariations is set to 'search'
and you use a dropdown to select ISBN for searching
To test:
1 - Search catalog for nb=9780590353403
2 - Confirm you don't have results, or delete the records with results
3 - Add isbn 0590353403 to a record
4 - Repeat search, fails
5 - Enable SearchWithISBNVariations
6 - Repeat search, fails
7 - Go to advanced search, select ISBN, search for 9780590353403
8 - Get results
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch prepares Koha to officially no longer support Elasticsearch 5.X
It adds a new system preference 'ElasticsearchCrossFields' to allow users to choose whether or not
to enable this feature
It updates the about page to add a deprecation warning if a site is running ES5
To test:
1 - Be running Koha with Elasticsearch 5.X
2 - Attempt to search
Error: Unable to perform your search. Please try again.
3 - Apply patch
4 - Update database
5 - Searching works
6 - Find syspref 'ElasticsearchCrossFields'
7 - Enable it
8 - Searching is now broken
9 - Check the about page
10 - you can now see the Elasticsearch version
11 - The systeminformation tab has a deprectaion warning
12 - Set SearchEngine preference to 'Zebra'
13 - View the about page - no warnings
14 - Test again with ES6 - searching should "work" with either pref setting
15 - There should be no warning on about pages
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
MySQL 5.7 does not allow queries using 0000-00-00
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Monteur vs Réalisateur
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
In installer/data/mysql/fr-FR/1-Obligatoire/authorised_values.sql, ER is defined twice, for "Erythrée" (correct one) and "Allemagne".
Test plan :
- Create a new database using fr-FR or import the sql file
- Look at authorised values COUNTRY
=> without patch you have ER / Allemange
=> with patch you have ER / ErythrÃe
NOTE: Allemange occurs twice as well, correctly with DE.
This patch correctly removes the ER one.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This corrects:
CC -- duplicate, but name not full.
GQ -- duplicate, but only one name correct.
PK -- Poland was mislabelled.
This removes and edits duplicates and corrects PK to PL.
Signed-off-by: Luke Honiss <luke.honiss@gmail.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
ERROR 1064 (42000) at line 724: You have an error in your SQL syntax; check the manual that corresponds to your MariaDB server version for the right syntax to use near '+
+INSERT INTO authorised_values (category, authorised_value, lib) VALUES ('HOLD' at line 1
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
On the shoulders of bug 27015, this patch makes the pickup locations
dropdowns use Select2 to handle both fetching the pickup location
on-deman through the API, and also searching for them.
This provides a better user experience for really big lists.
To test:
1. Have some holds on a biblio
=> SUCCESS: Bug 26988 works, made it load the data when you click on the
dropdowns.
2. Apply this patch
3. Reload the page
=> SUCCESS: Similar-ish behaviour
=> SUCCESS: Notice you can search for branch names and make the list
shrink
4. Sign off :-D
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The SQL code was duplicated, I combine them here
frombranch needs to take input
switch owning to frombranch in second script
initialize hash as empty list, not a reference
add a newline after printed output if not mailing notices
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
