Adding the same auth_status check here too.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
When system preference is off, call no code related to Koha::Recalls.
Also add some missing module import.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
And making reverted ajax message clearer
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
See recalls on Intranet
- old recalls (all inactive recalls)
- recalls queue (all active recalls) - cancel, expire, revert waiting status, multiple cancel, mark overdue
- recalls to pull (available but not yet waiting) - cancel
- recalls awaiting pickup (awaiting pickup, awaiting pickup more than RecallMaxPickUpDelay days) - expire, revert waiting status
- overdue recalls (overdue to be returned) - cancel, multiple cancel
- biblio recalls tab (all active recalls relevant to this bib) - cancel, expire, revert waiting status, mark overdue
- patron recalls tab (all active recalls relevant to this patron) - cancel, expire, revert waiting status, mark overdue
- patron recalls history tab (all recalls relevant to this patron) - cancel, expire, revert waiting status, mark overdue
- log viewer
and the general circulation of recalls
== TEST PLAN FOR RECALLS ==
ADMINISTRATION
1. Apply all patches
2. Run database updates, update schema files and confirm everything applies cleanly
3. Run tests and confirm everything passes:
t/db_dependent/Koha/Recall.t
t/db_dependent/Koha/Recalls.t
t/db_dependent/Stats.t
t/db_dependent/Circulation/CalcFine.t
t/db_dependent/Koha/Item.t
t/db_dependent/Koha/Biblio.t
t/db_dependent/Koha/Patron.t
t/db_dependent/XSLT.t
t/db_dependent/Search.t
t/db_dependent/Holds.t
t/db_dependent/Circulation/transferbook.t
t/db_dependent/Circulation.t
4. Go to Administration -> system preferences. Find the UseRecalls system preference. It should be DISABLED. Confirm RecallsMaxPickUpDelay is set to 7 by default.
5. Go to Administration -> circulation rules. Confirm there are no recalls circulation rules showing.
6. Test a few circulation flows: checking out, placing a reserve, checking in, fulfilling a reserve, etc. Confirm everything works as normal.
7. Go to Administration -> system preferences. Enable the UseRecalls system preference.
8. Go to Administration -> circulation rules. Set the following rules:
Recalls allowed (count) = 0
Recalls per record (count) = 0
On shelf recalls allowed ( If any unavailable / If all unavailable ) = If any unavailable
Recall due date interval (days) = 3
Recall overdue fine amount = (something different to your normal fine amount)
Recall pickup period (days) = 1
Throughout your testing, try with different combinations of these rules and itemtype / branchcode / categorycode. Also try with null values. Keep the circulation rules open in another tab so you can refer to and update these easily. You should also have at least one other tab open for the staff client, and a third tab open for the OPAC, for ease of testing.
9. Go to your account -> More -> Set permissions. Confirm the recalls permission is checked.
10. Set up a test user with OPAC login details (Borrower A). This could also be your own user, as long as you have OPAC login access.
11. Set up a test record (Biblio A) with at least two items (Item A and Item B) of the same item type (or an item type with the same recall circ rules).
PLACING A RECALL
12. Log in to the OPAC as Borrower A. Do a catalogue search with a term that will return multiple results, including Biblio A.
13. Click on Biblio A.
14. Notice there is a 'Place recall' button on the sidebar menu. Click this button. There will be a message saying that there are no items to recall - this is because all items are available.
15. Check out Item A to another borrower (Borrower B).
16. Refresh the 'Place recall' page. You will still NOT be able to place a recall - this is because Recalls allowed = 0 and Recalls per record = 0.
17. Edit the circulation rules to have the following values:
Recalls allowed (count) = 1
Recalls per record (count) = 1
18. Refresh the 'Place recall' page. You will now see the form to place a recall.
BIBLIO-LEVEL RECALL, NO TRANSFER
19. Place a biblio-level recall.
Pickup location: Branch A, the set branch when you are logged into the staff client
Recall not needed after (expiration date): whatever you want
Select 'recall next available item'
Click confirm
20. Confirm the recall is placed successfully. Confirm that the new due date displayed is correctly calculated to be today's date, plus 3 days (taken from the 'recall due date interval' circ rule)
21. In the staff client, look at Borrower B's account, and go to their Notices tab. Confirm they have received a 'Notification to return recalled item' notice.
22. Look at Borrower B's checkouts table. Notice the due date for their checkout has been adjusted, and there is now a note to say that the item was recalled and the due date adjusted.
23. Log in to the OPAC as Borrower B and go to your summary tab. Notice there is a note under their checkout to say the item had been recalled.
24. Log out of the OPAC and log back in as Borrower A.
25. Go to your summary tab. Confirm there is a Recalls tab with a count of 1.
26. Cancel the recall using the button. Confirm it cancels and the Recalls tab disappears.
27. Do a catalogue search with a term that will return multiple results, including Biblio A.
28. When the results load, notice there is a 'Place recall' button next to the 'Place hold' button. Click this 'Place recall' button.
29. Notice you are redirected straight to the form to place a recall.
30. Place a biblio-level recall again, following the steps in Step 19.
31. Go to your recalls history tab. Notice your first cancelled recall shows here.
32. Cancel the recall you just created, using the button. Confirm it cancels and you are redirected to your summary tab.
33. In the staff client, enable the UseCourseReserves system preference.
34. Go to the main menu, click Course Reserves.
35. Add a new course. (You may also have to define an authorised value for DEPARTMENT.)
36. Add Item A as a reserve to this course.
37. View Course Reserves in the OPAC. Click the course you just created.
38. Notice the reserve has a Recall button underneath it's 'Checked out' status. Click this button.
39. Place a biblio-level recall again, following the steps in Step 19.
40. Click the 'Place recall' link in the breadcrumbs.
41. Notice there is a message saying that you have reached the max number of recalls on this record. This is because Recalls allowed = 1 and Recalls per record = 1.
42. Edit the circulation rules to have the following values:
Recalls allowed (count) = 10
Recalls per record (count) = 5
43. Refresh the 'Place recall' page. You will now see the form to place a recall.
44. Create another test record (Biblio B) with at least one item (Item C).
45. Find this record on the OPAC and place a biblio-level recall again, following the steps in Step 19.
46. In the staff client, go to Circulation -> Old recalls. You should be able to see your two cancelled recalls.
47. Go to Circulation -> Recalls queue. Your current recalls should show here.
48. Use the 'Select all' checkbox to select all recalls.
49. Cancel the recalls using the 'Cancel selected recalls' button.
50. Go to the OPAC and place a biblio-level recall on Biblio A again, following the steps in Step 19.
51. In the staff client, check in Item A, which should still be checked out to Borrower B.
52. A box should pop-up asking you to confirm Borrower A's recall. Click ignore.
53. Click the link to go view Biblio A's details in the catalogue.
54. Click the recalls tab. Notice Borrower A's recall is displayed, and shows it is still Requested (has not been confirmed waiting).
55. Check in Item A again. This time, confirm the recall as waiting using the "Confirm recall" button.
56. Go to Borrower A's Notices tab. Confirm there is a notice "Recalled item awaiting pickup".
57. Go to Borrower A's checkouts. Notice there is a recalls tab. Confirm the recall is showing as "Ready for pickup".
58. Click the 'Actions' dropdown. Click the "Revert waiting" button. The page should show a message that the waiting status has been reverted, without reloading.
59. This time, check in Item B. The recall confirmation box should show again, because this a biblio-level recall that any recallable item under Biblio A can fill. Click the "Print slip and confirm" button.
60. Check the slip that is generated. Confirm it contains Borrower A's correct details, and the details of the recall are correct.
61. Go to Circulation -> Recalls awaiting pickup. Confirm the recall is now waiting and shows in this list.
(You could also try this with Item B having a different item type to Item A, and circ rules not allowing Item B's item type to have recalls. When checking in Item A, it should not trigger the recall box).
62. Go to Borrower A's checkouts. Check out Item B.
63. Confirm the checkout is successful and the recall is removed from the Recalls tab.
64. Go to Circulation -> Old recalls. The fulfilled recall should show.
65. Check in Item B.
BIBLIO-LEVEL RECALL, TRANSFER REQUIRED
66. Check out Item A to Borrower B.
67. Log in to the OPAC as Borrower A.
68. Find Biblio A and place a biblio-level recall.
Pickup location: Branch B, a different branch from your logged in branch. This recall will require a transfer.
Recall not needed after (expiration date): whatever you want
Select 'recall next available item'
Click confirm
69. In the staff client, check in Item A at Branch A. Notice the box that pops up shows that a transfer is required.
70. Click "confirm recall and transfer" and confirm the transfer.
71. Go to your account and click the Recalls tab.
72. Confirm the recall status now shows the item is in transit to Branch B.
73. In the drop-down top-right of your window, select 'Set library'.
74. Set your library to Branch B.
75. Go to Circulation -> Transfers to receive. Notice that the recall is showing here.
76. Click 'Cancel transfer'.
77. Go to Circulation -> Recalls queue
78. Confirm the recall status has been reverted to Requested.
79. Set your library back to Branch A.
80. Check in Item A and trigger the transfer.
81. Set your library back to Branch B.
82. Check in Item A at Branch B.
83. When the 'Recall found' box pops up, click Ignore.
84. Go to Circulation -> Recalls to pull. The recall should show here, with a button to "Cancel recall and return to: Branch A"
85. Click the button to cancel the recall.
86. Repeat Steps 66-70.
87. Check in Item A at Branch B. Confirm the recall as waiting.
88. Check out Item A to Borrower A to fulfill the recall.
89. Set your library back to Branch A and check in Item A.
ITEM-LEVEL RECALL, NO TRANSFER
90. Go to Administration -> circulation rules. Set the following rules:
On shelf recalls allowed ( If any unavailable / If all unavailable ) = If all unavailable
91. Check out Item A to Borrower B.
92. Log in to the OPAC as Borrower A and go to Biblio A.
93. Click the 'Place recall' button. Confirm there is a message that there are no items to recall. This is because On shelf recalls allowed = If all unavailable, and there is still one item (Item B) available.
94. In the staff client, edit Item B to have a withdrawn, item lost or not for loan status.
95. Refresh the 'Place recall' page. Confirm you can now see the form to place a recall.
96. Place an item-level recall.
Pickup location: Branch A.
Recall not needed after (expiration date): whatever you want
Select 'recall a specific item'
Item B will not be selectable, and Item A should be selected by default.
Click confirm
97. In the staff client, edit Item B and remove the lost or missing status.
98. Check in Item B. Confirm the recall box does not pop up, because it cannot fill the item-level recall.
99. Check in Item A. Confirm the recall as waiting.
100. Go to Circulation -> Recalls awaiting pickup
101. Expire the recall. Confirm it expires as expected.
ITEM-LEVEL RECALL, TRANSFER REQUIRED
102. Repeat steps 91 to 95.
103. Place an item-level recall.
Pickup location: Branch B, we will require a transfer.
Recall not needed after (expiration date): whatever you want
Select 'recall a specific item'
Item B will not be selectable, and Item A should be selected by default.
Click confirm
104. In the staff client, check in Item A. Confirm the recall and trigger the transfer.
105. Set your library to Branch B and check in Item A.
106. Confirm the recall as waiting.
107. Check out Item A to Borrower A and fulfill the recall.
108. Set your library back to Branch A and check in Item A.
CRONJOBS: EXPIRING RECALL
109. Check out Item A to Borrower B.
110. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
111. In your terminal, enter mysql and edit the expiration date of your recall to be before today
UPDATE recalls SET expirationdate = NOW()-2 WHERE recall_id = X;
112. Run the expiry cronjob from within your shell
perl misc/cronjobs/recalls/expire_recalls.pl
113. Go to Borrower A's account and go to the Recalls history tab
114. Confirm the recall has been expired because the current date surpassed the specified expiration date
115. Check out Item A to Borrower B.
116. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
117. In the staff client, check in Item A and confirm the recall as waiting.
118. In your terminal, enter mysql and edit the waiting date of your recall to be before today
UPDATE recalls SET waitingdate = NOW() - interval 5 day WHERE recall_id = X;
119. Run the expiry cronjob from within your shell
perl misc/cronjobs/recalls/expire_recalls.pl
120. Go to Borrower A's account and go to the Recalls history tab
121. Confirm the recall has been expired because the recall had been waiting for more days than the Recall pickup period
122. Go to Administration -> circulation rules. Set the following rules:
Recall pickup period (days) = 0
123. Set the RecallsMaxPickUpDelay system preference = 1.
124. Check out Item A to Borrower B.
125. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
126. In the staff client, check in Item A and confirm the recall as waiting.
127. In your terminal, enter mysql and edit the waiting date of your recall to be before today
UPDATE recalls SET waitingdate = NOW()-2 WHERE recall_id = X;
128. Run the expiry cronjob from within your shell
perl misc/cronjobs/recalls/expire_recalls.pl
129. Go to Borrower A's account and go to the Recalls history tab
130. Confirm the recall has been expired because the recall had been waiting for more days than the RecallsMaxPickUpDelay syspref
CRONJOBS: OVERDUE RECALL
131. Check out Item A to Borrower B
132. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
133. In your terminal, enter mysql and edit the due date of the checkout to Borrower B to be before today
UPDATE issues SET date_due = NOW()-2 WHERE issue_id = X;
134. Run the overdue cronjob from within your shell
perl misc/cronjobs/recall/overdue_recalls.pl
135. Go to Circulation -> Overdue recalls
136. Confirm your recall is showing here now as the recall has been marked Overdue
CIRCULATION
137. Check in Item A.
138. When the recall box pops up, click Ignore.
139. Check out Item A to Borrower B. You should see a yellow confirmation box, saying that another borrower has recalled the item you are trying to check out.
140. Click "No don't check out" and confirm the item isn't checked out and the recall remains.
141. Repeat Step 139.
142. Click "Yes check out" and confirm the item is checked out and the recall remains.
143. When Borrower B's checkout table loads, confirm that you cannot renew or check in the item from the Checkouts table because there is a 'Recalled' link which takes you to the recalls tab for that biblio.
144. Repeat Steps 137-139.
145. Select "Cancel recall" and click "Yes check out" and confirm the item is checked out and the recall has been cancelled.
146. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
147. Check in Item A. Confirm the recall as waiting.
148. Check out Item A to Borrower B. You should see a yellow confirmation box, saying that that another borrower has recalled the item that you are trying to check out.
149. Select "Revert waiting status" and click "Yes check out" and confirm the item is checked out and the recall status has reverted to requested.
OTHER
150. In your terminal, enter mysql and edit the due date of the checkout to Borrower B to be before today
UPDATE issues SET date_due = NOW()-2 WHERE issue_id = X;
151. Go to Borrower A's recalls and click the Actions dropdown.
152. Click "Mark as overdue" and confirm the recall is marked as overdue manually.
153. Go to Tools -> Log Viewer. Check only the Recalls module, and leave all other parameters, and click Submit.
154. Confirm all of the recalls actions that have been made are correctly logged.
Note: recalls messaging preferences are introduced in Bug 23781.
The recall feature is fully documented at: https://wiki.koha-community.org/wiki/Catalyst_IT_Recalls
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
I squashed the patches because they are too trivial to have a test plan.
Or it is too much work to write the test plan for such trivial cases. I
leave the original commit messages just in case.
Generally, this are all cases in which CGI::param is being called in a
trivially identifiable _list context_. i.e. they are assigned to a
@variable.
I left one case out on purpose: admin/auth_subfields_structure.pl
Paul introduced this:
my @kohafield = ''.$input->param('kohafield');
and then:
my $kohafield = $kohafield[$i];
My intuition says it is forcing scalar context on the first assignment
so the list contains a single element and then inside the loop some
$kohafield assignments should lead to undef, and even warnings. I leave
it for a separate patch because it is not that easy testable and is a
sensible area.
Bug 29771: Remove warning from acqui/finishreceive.pl
This patch removes a warning that shows when receiving.
To test:
1. Do the acq workflow up to the receive step.
2. Once you choose the items and click on Finish
=> FAIL: There's a warning in the logs
3. Revert receipt
4. Apply this patch
5. Receive
=> SUCCESS: No more warnings
6. Sign off :-D
Bug 29771: Remove warning from svc/members/add_to_list
To test:
1. Run:
$ tail -f /var/log/koha/kohadev/*-error.log
2. Generate a patron list
3. Perform a patron search that gives you a few
4. Select some, and choose to add them to the list
=> FAIL: The logs show the infamous warn:
CGI::param called in list context from /kohadevbox/koha/svc/members/add_to_list
5. Apply this patch
6. Restart plack and repeat 4
=> SUCCESS: No warn!
7. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The method Koha::Libraries->branchcode is not covered by tests!
Trace begun at /kohadevbox/koha/Koha/Objects.pm line 572 Koha::Objects::AUTOLOAD('Koha::Libraries=HASH(0x563bf134b810)') called at /kohadevbox/koha/svc/cataloguing/framework line 33
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test:
1. Use same plan as previous patch, but observe full item type description
instead of item type code
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This files are no longer used and thus removed. Their functionality is
already present on the API
POST /holds/:hold_id/suspension
DELETE /holds/:hold_id/suspension
To test:
1. Apply this patch
2. Run:
$ git grep 'hold/suspend'
$ git grep 'hold/resume'
=> SUCCESS: No references to the scripts
3. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patchset moves the 'category' attribute for virtual shelves, that
takes values of 1 and 2 (private and public respectively) into a boolean
for public.
The DBRev is trivial, and the changes to the code are as well.
To test:
1. have some known public and private lists
2. Apply this patches
3. Run:
$ updatedatabase
=> SUCCESS: Public lists have public=1, private have public=0
4. Run:
$ kshell
k$ prove t/db_dependent/Utils/Datatables_Virtualshelves.t \
t/db_dependent/Virtualshelves.t
=> SUCCESS: Tests pass!
5. Try the feature in staff and OPAC
=> SUCCESS: All good
6. Sign off :-D
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The previous patch makes check_cookie_auth return the session instead of
$sessionID, so we are adjusting the different calls to prevent
confusion.
However they are mainly used to check the authentication status and
don't care about this second variable.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It has been missed on bug 17600.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Adjusted commit title.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes the Koha::ArticleRequest->cancel parameters into a
hashref. (Missing) tests are added for those parameters being set as
well.
Calls to ->cancel are updated.
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/Koha/ArticleRequest.t \
t/db_dependent/api/v1/article_requests.t
=> SUCCESS: Tests pass!
3. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the stage "requested" in article request process, which
is previous to pending stage.
To test:
1. apply this patch
2. updatedatabase
3. enable ArticleRequests syspref
4. from staff inteface and from opac search for a record and place an
article request
5. koha-mysql kohadev
6. query: select subject, content, letter_code from message_queue;
CHECK => There is a message for each article request with code
AR_REQUESTED
=> In opac-user.pl, in "Article requests" tab you should see a row
in the table with "Requested" status
5. in staff go to Circulation -> Article Requests
SUCCESS => You should see 3 tabs, one for Requested stage (with two
requests), one for Pending stage and one for Processing stage.
6. play with actions buttons
CHECK => you should see a new action called "Set request as pending"
SUCCESS => All action buttons behave as expected, and tab counts updates
correctly.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Remove forgotten code of the old legacy demo functionality that was
removed from elsewhere except systempreferences, this code not only
serves no purpose but also is causing some troubles for our customers.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
One big patch for one big move.
The "News" feature (opac_news) has been hijacked to handle some system
preferences (bug 26050). The goal was to take profit of the UI (editor)
and the ability to translate the value.
Disclaimer: This patch is NOT offering the best implementation but, as
we still don't have bug 24975, it cannot be done now. And no, we don't
want to wait for it to move forward here. This patch is going into the
right direction anyway.
This enhancement is going to rename the "News" with a more genertic
"Additional contents". We have two different "categories" of content:
"news" and "html customizations".
What does it bring?
- A split on the UI for disambigate the two types of content (news and
syspref/html customizations)
- A simplification of the edit form: all languages will be translatable
on the same view (like the "notice templates")
- Ground will be prepared for different types of content (if needed later)
- Staff news can be translated
How was the "News" area working before this patch?
The opac_news DB table contained a (very inconsistent) 'lang' column.
The different values were:
- '' => news to display at the OPAC and staff interfaces
- 'koha' => news for staff only
- 'slip' => news for slip notices
- $lang => news for OPAC only, translated in $lang ('en', 'es-ES', etc.)
- "$location_$lang" => A syspref moved to this "news" area. The syspref
is $location, and is translated in $lang. Eg. OpacLoginInstructions_en,
OpacLoginInstructions_fr-FR, opacheader_es-ES
This patch is improving the DB structure with the following changes:
- renaming 'opac_news' with 'additional_contents'
- new 'category' column
=> 'news' or 'html_customizations'
- new 'location' column
=> For 'news': 'staff_and_opac', 'staff_only', 'slip'
=> For 'html_customizations': the old syspref name (eg. 'OpacLoginInstructions').
- new 'code' column (see later for more info)
- the 'lang' column will only contain the language code ('en', 'es-ES',
etc.). BUT a 'default' entry will ALWAYS exist for fallback behaviour.
We are getting closer to the 'notice template' table structure because
we want to match its UI. The 'code' column will bring us the ability to
group the different 'additional_contents' rows. The code for a given
news will be the same, but the (lang, title, content) will differ.
Examples:
News 1 will have, for each of the translated versions
(category, code, location, branchcode)
('news', 'News1', $location, $branchcode||undef)
And the 3 following columns will differ:
(title, content, lang)
('title for news 1', 'content for news 1', 'default')
('titulo para 1', 'contenido para 1', 'es-ES')
Note that the "category" is not strictely necessary, but it seems better
to have the ability to split the different content by category/type
easily.
Additional changes:
- Syspref 'NewsToolEditor' is renamed 'AdditionalContentsEditor'
- Koha::NewItem => Koha::AdditionalContent
- Koha::News => Koha::AdditionalContents
- Script and template renamed from koha-news to additional-contents
- Foreign keys have been renamed
- Subpermission edit_news has been renamed edit_additional_contents
- The UI can now be accessed via a "News" or "HTML customizations" link
from the tools module. The related contents will then be displayed (both
categories are now split)
Changes not done here:
- Primary key 'idnew' could be renamed 'id'
Limitations of the upgrade:
News cannot be grouped by a unique code for existing translations.
=> A given news will be now displayed several times on the translated
interface
Any ideas to improve the upgrade behaviour?
We will have to add a warning in the release notes to tell libraries to
review their news.
Test plan:
0. Don't apply the patches
1. Translate the interfaces in some languages
. Create some news for staff and OPAC
. Create some content for different entry of HTML customizations
Note that you are forced to define a 'default'.
Also note that you are only forced to fill the title (not the content).
This is certainly problematic (see FIXME in the code) as sometime only
the content is displayed.
. Play with the interface (edit, delete, filter)
. Go to the different places the news are displayed, and confirm they
are displayed correctly (staff home, opac home, opac rss)
. Create 1+ news for 'slip', check an item out and 'print slip' (from
the circulation page). You must see the news.
. Go to the different places you are expecting the HTML customizations
to be present and confirm that you see them.
. Switch the lang of the interface and confirm that you now see the
content in the translated version
. Generate the templates in another language, don't translate the
content
. Use this language for the interface and confirm that the 'default'
version is displauyed.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1 - Attempt to save a record in the advanced cataloging editor
2 - It fails
3 - Apply patch
4 - It succeeds
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Throughout the file we call methods with the module
Following suit rather than importing the methods
To test:
1 - Attempt to load advanced cataloging editor
2 - it fails
3 - http://localhost:8081/cgi-bin/koha/svc/cataloguing/framework?frameworkcode=&callback=define
4 - Undefined subroutine &CGI::Compile::ROOT::kohadevbox_koha_svc_cataloguing_framework::GetMarcStructure called at /kohadevbox/koha/svc/cataloguing/framework line 18
5 - Apply patch
6 - Cataloging editor loads!
7 - Link in #3 loads!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
TO test:
1 - Write a report
2 - Click the svc link in the saved reports list
3 - ISE
4 - Make report public
5 - Click the svc link in saved reports list
6 - ISE
7 - Apply patch
8 - Comfirm opac/public link works
9 - Make report not public
10 - Confirm the internal svc link works
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
On bug 17591 we discovered that there was something weird going on with
the way we export and use subroutines/modules.
This patch tries to standardize our EXPORT to use EXPORT_OK only.
That way we will need to explicitely define the subroutine we want to
use from a module.
This patch is a squashed version of:
Bug 17600: After export.pl
Bug 17600: After perlimport
Bug 17600: Manual changes
Bug 17600: Other manual changes after second perlimports run
Bug 17600: Fix tests
And a lot of other manual changes.
export.pl is a dirty script that can be found on bug 17600.
"perlimport" is:
git clone https://github.com/oalders/App-perlimports.git
cd App-perlimports/
cpanm --installdeps .
export PERL5LIB="$PERL5LIB:/kohadevbox/koha/App-perlimports/lib"
find . \( -name "*.pl" -o -name "*.pm" \) -exec perl App-perlimports/script/perlimports --inplace-edit --no-preserve-unused --filename {} \;
The ideas of this patch are to:
* use EXPORT_OK instead of EXPORT
* perltidy the EXPORT_OK list
* remove '&' before the subroutine names
* remove some uneeded use statements
* explicitely import the subroutines we need within the controllers or
modules
Note that the private subroutines (starting with _) should not be
exported (and not used from outside of the module except from tests).
EXPORT vs EXPORT_OK (from
https://www.thegeekstuff.com/2010/06/perl-exporter-examples/)
"""
Export allows to export the functions and variables of modules to user’s namespace using the standard import method. This way, we don’t need to create the objects for the modules to access it’s members.
@EXPORT and @EXPORT_OK are the two main variables used during export operation.
@EXPORT contains list of symbols (subroutines and variables) of the module to be exported into the caller namespace.
@EXPORT_OK does export of symbols on demand basis.
"""
If this patch caused a conflict with a patch you wrote prior to its
push:
* Make sure you are not reintroducing a "use" statement that has been
removed
* "$subroutine" is not exported by the C4::$MODULE module
means that you need to add the subroutine to the @EXPORT_OK list
* Bareword "$subroutine" not allowed while "strict subs"
means that you didn't imported the subroutine from the module:
- use $MODULE qw( $subroutine list );
You can also use the fully qualified namespace: C4::$MODULE::$subroutine
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes the following changes:
Add menu option Edit URLs.
Edit modal form to edit URLs.
Save URLs via ajax call to svc/article_request (Add action update_urls).
Add URL column to pending and processing table.
Allow Edit URLs for pending table too (just as Complete).
Do not allow 'Complete request' if a scan request has no URL(s).
Test plan:
[1] Add a few scan and photocopy requests.
[2] Fill url-A and url-B in two separate scan requests.
[3] Verify that these two urls are really saved (refresh form).
[4] Check that you cannot complete a scan request without URL and that you
cannot add a URL to a photocopy request.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
There is a call to check_cookie_auth then another one to get_template_and_user
Test plan:
Use mana to create new report and new subscription.
Confirm that you need the necessary permissions to use it
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
While this won't prevent the deadlock, it should catch the case where
a deadlock causes the DB update to fail and provide feedback to the user
and rollback the transaction
I don't know how to trigger the deadlock, I can only confirm that we see it, and
that this should catch it.
To test:
1 - Apply patches
2 - Checkout several items to a patron
3 - Confirm that 'Renew all' feature continues to work as expected and all items are renewed
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Removed my from variables in test
Undid stray line deletions
Undid adding 1; to test file
Fix CSS replace command
Update license
Fix spelling
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
add authority type in the form to create the missing authority.
when authority was found, the 600$9 field have the authid.
Testing scenario (Creating an authority record for a failed automatic link) :
1 - In your system preferences set:
AutoCreateAuthorities: Don't generate
BiblioAddsAuthorities: Allow
2 - Go to the Cataloging -> New record (koha/cataloguing/addbiblio.pl)
Ensure you are using the basic editor
3 - Click the "Link authorities automatically" button.
A message should appear, telling the user "No authority link was changed."
4 - Add random informations in field 600$a of the biblio record.
5 - Click the "Link authorities automatically" button.
the message box should now show "600 - No matching authority found.".
the 9 subfield is red
Above the 9 subfield is a red X with a blue plus next to it
Hover on the plus, see it is titled 'Create authority'
6 - Click the 'Create authority' link
7 - A new authroity form pops up, the info from the cataloging editor is prefilled
Click the 100 field heading to expand and confirm info is transferred
8 - Fill in necessary fields and save the new authority
9 - The cataloging screen now has the 9 subfield populated and is green
10 - Click "Link authorities automatically" again
Dialog says "No authority link was changed"
11 - In another tab go to System preferences and set AutoCreateAuthorities to 'Generate'
12 - Add random information to the 650 field
13 - Click 'Link authorities' button
14 - Dialog says:650 - No matching authority found. A new authority was created automatically.
15 - The subfield 9 is green and has the id of the new authority record
16 - In another tab search authorities and find an existing subject heading
17 - Add a new 650 with the info from the existing record
18 - Click 'Link authorities'
19 - The new field is correctly linked to existing authority
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
https://bugs.koha-community.org/show_bug.cgi?id=12299
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
-turn on claim returned
-find some items with a 245b or add a 245b to some items
-check those items out and mark them as claimed returned
-on the borrowers /cgi-bin/koha/circ/circulation.pl page look at the return-claims-table
-no subtitle
-apply patch and clear browser cache, restart_all
-now you should see the subtitle
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If the circulation rule "renewalsallowed" is not set (or an empty
string) then the checkout list displays
(0 of renewals remaining)
It should display "0 of 0"
Test plan:
Set renewalsallowed to an empty string
Check an item out
Notice the change
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The merging of Bug 23051 has added a paramter that can be passed to
C4::AddRenewal. This bug does also, so the offset of this bug's new
paramter was wrong. This patch fixes it.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds support for unseen renewals.
Here we retrofit knowledge of unseen renewals and add the display of unseen
renewal counts and warnings, in addition to adding the ability to
specify a renewal as being "unseen".
The functionality added here is goverened by the UnseenRenewals syspref.
Signed-off-by: Sally Healey <sally.Healey@cheshirewestandchester.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
don't fail if a hold has no desk attached.
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When an item is checked in and marked 'Waiting' or already 'Waiting'
and there is a desk attached to the session, the item is marked
waiting at the current desk of the current library.
The information is displayed on the OPAC and on the intranet. The
patron can then know at which desk he can retrieve his document.
Desk Management (Bug 13881) is now useful.
Test plan :
1. apply Bug 24201
2. $KOHA_PATH/installer/data/mysql/updatedatabase.pl
3. Check out some document to someone
4. make another one reserve this document
5. check in the document
6. you can see the document is attach to the current library
7. create some desks and attach one to your session (see Bug 13881 and
Bug 24201)
8. cancel the preceding reserve and redo steps 3 to 5
9. you should see the document is waiting at the current library and
current desk on:
a. the intranet document request page
b. the intranet borrower holds tab
c. the item list where the document is listed on the bibliographic
details
d. the borrower's OPAC holds tab.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 24412: (follow-up) QA
Following Josef Moravec QA comments :
- rewrite Koha::Hold->desk according to Object Oriented Koha
Guidelines and use it to fetch desk name in various templates
- remove unused Desks.GetName
- Check for columns existence in db update
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 24412: (follow-up) QA: useless change
Maybe it was a relic of something usefull... anyway
not anymore.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 24412: (follow-up) Fix POD
Koha::Desk and not Koha::Library...
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This adds the items.copynumber to the checkouts table in the
patron account in the staff interface.
To test:
- Apply patch
- Check out some items with and without copy number in the item
to any patron
- In the checkouts table on the Checkouts and Details tabs:
- Verify that a new column shows 'copy no' shows after 'call no'
- Verify the information displays correctly
- Verify that the column configuration settings for the new column works
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Previously we put all the servers into an object with keys of the server id
This patch converts it to an array of objects to preserve order, and adjusts code to use the array index
where necessary and store the server id within the array
To test:
1 - Add some new Z3950 servers, they don't need to be valid
FIRST
SECOND
THIRD
FOURTH
2 - Adjust the ranking so FOURTH:1 THIRD:2 SECOND:3 FIRST:4
3 - Enable and launch the advanced editor
4 - Click 'Advanced' under search on the left
5 - Note the list displays in the order you entered the servers
6 - Apply patch
7 - Reload
8 - Order is correct
9 - With valid servers, confirm that searching still works and servers can be checked or unchecked to include/remove from results
https://bugs.koha-community.org/show_bug.cgi?id=17515
Signed-off-by: B Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patchset adds the ability to attach cover images at item level.
This commit message will explain the different patches that are
following.
The main idea is to have cover images for a given item. This is useful
for a bibliographic record linked with a subscription. Each item could
have the cover image for the serial numbers.
In this first patch there is a limitation to allow only 1 cover per
item, but a later patch will remove it. That way we will take advantage
of the recent work done to display nicely cover images (bug 25031), and
reuse it in this development (staff interface only).
In order to use a flexible and robust code, the legacy C4 code
(C4::Images) has been moved to Koha::CoverImages. Also the DB table
biblioimages has been renamed cover_images.
Test plan (for the whole patch set):
0. Turn off AllowMultipleCovers
1. Create a new bibliographic record and items
2. Attach a cover image to the bibliographic record
3. In the item list of the bibliographic detail page, you will notice a
new "Upload image" action. Select it
4. Select an image
=> Notice the new column in the item table
5. Upload another image
=> You cannot upload 2 images, you are going to replace the existing one
6. Turn on AllowMultipleCovers
7. Attach another image to the image
=> Notice the 2 images are displayed nicely, with navigation controls
8. Confirm you can view an image if you click on it and you can delete it
9. Test the OPAC view now
=> Cover image for items are displayed in the table, there is no
navigation controls here however.
Sponsored-by: Gerhard Sondermann Dialog e.K. (presseplus.de, presseshop.at, presseshop.ch)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The issues table allows for checkins and was not appropriately
requireing confirmation for the multi-part confirmation added in this
bug.
Test plan
1/ Enable the feature as per previous patches
2/ Checkot an item with attached materials
3/ Navigate to a page that display your users issues table (the checkout
page is a reasonable example)
4/ You should have the option to select items for return in the table
(If not, use the column settings to enable the feature)
5/ Select at least the item with attached materials to return
6/ Upon clicking the return buttton you should find that items without
additional materials are returned as expected, but rows with additional
materials turn yellow and contain a message and additional checkbox for
confirmation in the table.
7/ Ensure the checkbox is selected and click the return button again
8/ This item should have been returned.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Ajax script svc/checkouts display checkouts of a patron.
For each item, it fetches a Koha::ItemType object and a Koha::AuthorisedValues object for location,ccode,lost and damaged.
For performance on huge number of checkouts :
Item types should be fetch once before the loop.
authorised values should call Koha::AuthorisedValues->get_description_by_koha_field because it uses a cache.
I've tested with Plack :
Without patch :
100 checkouts = 6 seconds
1000 checkouts = 60 seconds
With patch :
100 checkouts = 5 seconds
1000 checkouts = 44 seconds
Patch also changes the fact that authorised value categories are no longer hardcoded LOC,CCODE,LOST and DAMAGED, they depend on default framework.
Like is doing Bug 26323.
Test plan :
1) Dont apply patch
2) Use sql to define some items lost and damaged
3) Look at checkouts table on a patron with a lot of checkouts
4) Apply patch
5) Look at checkouts table again
6) Check infos are the same : record level item type, item type, location, collection, lost, damaged
7) Check infos are the same in "Number of checkouts by item type"
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Without this patch, you can't preview letters when running Koha in CGI mode.
To test:
1. Run Koha as CGI (and not Plack)
2. Go to /cgi-bin/koha/tools/letter.pl?op=add_form&branchcode=&module=circulation&code=CHECKIN
3. Try to preview the notice (using a valid barcode)
4. Note in the browser console that svc/letters/preview is generating a 500 error
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Was this wrong?
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomás Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It defaults to 0 in get_template_and_user
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
