Before this patch the order receive page (parcel.pl) would show
... Received by: <current user> On: <current date>
This is not really helpful. Whenever you viewed an invoice, it
would tell you it was _you_ who received that _today_.
As we don't store a creator of an invoice and the order lines
in an invoice could have been received by different people (which
we also don't know about), the "Received by" is removed by this patch.
Instead of today's date, we can show the shipment date entered for
the invoice. Again: different order lines could have been received
on different dates for this shipment. So only the shipment date makes
sense as it's on invoice level.
This also makes changes to the page title, breadcrumby and page heading:
When the invoice is closed, they will read:
Receipt summary for [vendor] ...
When the invoice is not closed, they wil read:
Receive orders from [vendor] ...
To test:
- Create a basket with some orders in acq
- Close the basket
- Receive shipment and create an invoice
- Make sure shipment date is not set to today
- Verify the information shown on top of parcel.pl is you and today
- Change staff users
- Go to your invoice, it's now this user and today
- Apply patch
- Received by: should be gone and the On: replaced by Shipment date:
with the date you selected
- Check the page title, breadcrumbs and headings read all the same 'Receive orders...'
- Finish receiving and close the invoice
- "Go to receipt page"
- Verify they now read "Receipt summary.."
If you have older invoices in your system, it would work
even better with these as you'd see that always today's date
is displaying without the patch.
Signed-off-by: Marjorie <marjorie.barry-vila@collecto.ca>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Updated to only show one barcode number, with either an "only" or an "or any available" depending on whether it's an item or bib hold.
Also incorporating feedback to simplify the TT logic and remove list formatting.
To test:
1 - Place an item level hold on a bib with several items with the same callnumber
2 - View the holds to pull report
3 - Try to guess which one on the shelf is right?
4 - Apply patch
5 - See the barcode in holds to pull report
6 - You can now grab the correct item (but don't yet)
7 - Place a next available hold on the same title
8 - See the report now shows one possible valid barcode with the text "or any available."
9 - Check in a different item that fills the next available hold
10 - Now the report shows the single item for the borrower
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Same as previously
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
From the template we are assuming that items.notforloan is mapped with
the NOT_LOAN authorised value category, but that is not necessarily the
case.
We must retrieve the correct AV category
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch updates the JavaScript for checking and unchecking checkboxes
on the Acquisitions planning page so that it doesn't require the
checkboxes plugin.
To test, apply the patch and go to Administration -> Budgets -> Budget
details -> Planning.
On the planning page, test the "Show all columns" and "Hide all columns"
checkboxes. They should work correctly to show and hide the correct
columns.
Signed-off-by: Henry Bolshaw <bolshawh@parliament.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Realized I'd left a stray tag, fixed.
To test:
1 - go to borrower account, apply manual fee
2 - go to Transactions tab and see that fee has "% Apply discount" button
3 - apply patch, restart, reload page
4 - button just says "Apply discount"
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
While these may not make sense for all patron field preferences, I think
it's better to have them in general than to have them missing.
To test:
- Check the modal for BorrowerMandatoryField system preference
- Verify dateenrolled and dateexpiry fields are missing
- Apply patch
- Verify the dates are listed now
- Set both to mandatory
- Verify that they are indeed mandatory when adding a new patron now
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Add a "year" search field type. Fields with this type will only
retain values that looks like years, so invalid values such as
whitespace or word characters will not be indexed.
This for instance improves the behaviour when sorting by
"date-of-publication". If all values are indexed, records with
junk data instead of valid years will appear first among the search
results, drowning out more relevant hits. If assigning this field
the "year" type these records will instead always appear last,
regarless of sort order.
To test:
1) Have at least two biblios, one with a valid year in 008 (pos 7-10)
and another with an invalid one ("uuuu" for example)
2) Perform a wildcard search (*) and sort results by publication date.
3) The record with invalid year of pulication in 008 should appear first
4) Apply patch and run database updates
5) Reindex ElasticSearch
6) Perform the same search as in 2)
7) The record with the invalid year should now appear last
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch set attempts to replace all the <i> tags with <em> and all
the <b> tags with <strong> in the staff interface.
I attempted to get all the templates, includes, and xslt files.
To test:
1. Review the changes as best as possible, looking for mistakes.
2. grep for <i> and <b> in the modules, includes, and xslt folders. You should get nothing/
3. If you grep '<\/i>' you should only see instances of Font Awesome.
4. If you grep '<\/b>' you should only see instances where caret is used.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1- apply patch, restart
2- look up AutoSelfCheck sysprefs
3- confirm new note in description
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Wrong line ending in JSON causes error:
Uncaught SyntaxError: missing } after property list
note: { opened at line 29579, column 15
To test:
1 - Have a title with some items not for hold in staff interface
2 - Set AllowHoldPolicyOverride to 'Allow'
3 - Attempt to place hold on the title
4 - Note JS error in the console and datatable does not load for items
5 - Apply patch
6 - Reload
7 - Error is cleared, table loads correctly
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It appears that through various rebases the variable names in the form
and the controller script have become mismatched. This patch corrects
the situation and clarifies their intended use.
Test plan:
1/ Turn on cash registers in sysprefs
2/ Define at least 2 cash registers in Admin
3/ Create a manual invoice on a patron
4/ Pay off half of your fee, selecting the first register
5/ Pay off the remaining fee, selecting the second register
6/ Query accountlines.register_id for your two payments
8/ Confirm the two accountlines.register_id's do not match (thus the
passed variable was used)
https://bugs.koha-community.org/show_bug.cgi?id=26469
Signed-off-by: Jessie Zairo <jzairo@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The pattern check didn't work for me, but I figured we might
want to use the same validation as for the other numeric fields
on the form instead (upper age limit, etc.)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch:
* reverts changes on misc/admin/set_password.pl
* makes category param mandatory for AuthUtils::is_valid_password and AuthUtils::generate_password
* changes onboarding.pl to set category param in AuthUtils::is_valid_password
* Completes t/db_dependent/AuthUtils.t and drops t/AuthUtils.t
* Removes offending <input type="number"/> and replaces it by <input type="text" inputmode="numeric" pattern="[0-9]*"/>
https://bugs.koha-community.org/show_bug.cgi?id=23826
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the capability to override minPasswordLenth and RequireStrongPassword settings by category
To test:
1. koha-shell kohadev
2. koha-mysql kohadev
3. drop database koha_kohadev;
4. create database koha_kohadev;
5. go to admin page and start webinstaller. There continue the steps until onboarding.
6. reach step 3 of onboarding and create a new administrator patron
CHECH => Password control woks as normal (Minimum length 3 and strong required)
7. finish Koha installation and enter admin with your new administrator
8. set minPasswordLength to 3 and RequireStrongPassword to “Don’t require”
9. Create a new category (CAT2 from now on.. CAT1 is the category you made in onboarding process) and set minimum password length to 8 and require strong password
10. Create two new patrons, one with CAT1(patron1) and one with CAT2 (patron2)
CHECK => In both cases, try different combinations of length and strength. For patron1 the only requirement is to have 3 letters, but for patron2 the minimum length will be 8 and will require strong password.
CHECK => Try changing patron category before saving. Password requirements will change with category change.
11. Edit CAT1 and set minimum password length to 5
12. Go to patron1 details page, and change password.
CHECH => Now password minimum length is 5, but still it doesn’t require strong password
13. Edit CAT1, leave blank minimum password length and set require strong password to yes.
14. Go to patron1 details page, and change password.
CHECH => Password minimum length is back to 3, but now strong password is required
15. Set minimum password length in CAT2 to 12.
16. Go to patron2 details page, and click to fill a random generated password
CHECK => generated password should be 12 characters length
17. Set PatronSelfRegistration to Allow in admin settings
18. Go to OPAC and fill self registration from.
CHECK => Play with patron category. For each change in category, password requirements are modified.
CHECK => Set CAT1 as patron category, set ‘aA1’ as password (or another valid password for CAT1) and before hitting submit button, change to CAT2. Form should enter invalid state, and CAT2 password requirements should be displayed as error in password input.
19. Create a patron for CAT1 and another for CAT2, leaving password blank
CHECK => For CAT1’s patron, generated password length is 8 (minimum length for generated passwords), but for CAT2’s patron should be 12
20. In admin set PatronSelfRegistrationVerifyByEmail to require
21. Fill self registration form again with CAT2 as category
CHECK => Password requirements works as previous case.
22. Leave password blank and click submit
23. select * from message_queue;
24. Copy the link in the message and paste it in OPAC
CHECH => Generated password is 12 characters long. (Copy user id for next steps)
25. In admin set OpacResetPassword to Allow
26. Go back to OPAC, reload and click on “Forgot password?” link
27. Paste user id and click submit
28. Repeat steps 23 and 24
CHECK => Info message says “Your password must contain at least 12 characters, including UPPERCASE, lowercase and numbers.”
CHECK => enter an invalid password and you’ll get the same message in warning.
29. Login OPAC with the last user and your newly created password
30. Go to “Change your password” option
CHECK => Info message says “Your password must contain at least 12 characters, including UPPERCASE, lowercase and numbers.”
CHECK => enter an invalid password and you’ll get the same message in below “New password” input.
31. prove t/db_dependent/AuthUtils.t t/db_dependent/Koha/Patron/Category.t
32. Sign off
Sponsored-by: Northeast Kansas Library - NEKLS
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Why? Since the combo has been disabled since a few releases. If you
want to change this mapping, you should do it on Koha to MARC mappings.
This change is no longer per framework, but over all frameworks.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The link constructed in MARC-detail is not consistent. It adds
an index name but does not show in the query in the search box.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
There are 2 pages where one can change the Koha to MARC mappings in Koha:
- When editing the configuration for a MARC subfield
- On administration > Koha 2 MARC mappings
This patch adds a warning that the batchRebuildBiblioTables script
must be run if the mapping is changed.
To test:
- Go to Administration > MARC bibliographic frameworks >
Any framework > MARC structure > Any field > Edit subfield
- ÃThe hint about the batchRebuildBiblioTables will be on "Link"
instead of "Koha Link". This is wrong as the link doesn't care
about the mappings.
- Go to Administration > Koha to MARC mappings
- Verify there is no hint
- Apply patch
- Verify both pages now show an appropriate message
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
This commit message is not completely accurate. See the follow-ups.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch updates the basic MARC editor to provide a plugin name
variable to the template, allowing us to make a check on the name and
conditionally show an upload link if the "upload.pl" cataloging plugin
is selected.
To test, apply the patch and rebuild the staff client CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- Go do Administration -> MARC bibliographic framework -> MARC
structure -> 856 -> Edit subfields.
- Edit the "u" subfield and select "upload.pl" as the plugin under
"Other options."
- Go to Cataloging and create or edit a MARC record.
- Under tab 8 look for the 856 tag, subfield u. There should be an
"Upload" link corresponding to the form field.
- Click the upload link to confirm that it triggers a popup window with
the upload form.
- Confirm that other similar plugin links (for instance 100$a, 600$a)
display the old "tag editor" icon.
Signed-off-by: Lisette Scheer <lisetteslatah@gmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Some library would like to delay the importing of invoices until
a time of their choosing. The invoices should be imported into
the database as they do now, but the invoice processing should
be skipped. Instead, any invoice file with a status of 'new'
should have an 'Import' button to process the invoice.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Enable the new syspref EdifactInvoiceImport
4) Run the edi cronjob to import a new invoice file
5) View EDI messages table at /acqui/edifactmsgs.pl
6) Note the invoice files is not processes, and retains the status of 'new'
7) Use the 'import' button to process the invoice
8) Note the invoice is now marked 'received' and the 'import' button is gone
9) Verify the invoice was actually processes
Signed-off-by: Debi Stears <DDStears@washoecounty.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If you define the address we use it, if not we fallback,
it's not really a redirect, and that just makes the name longer.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
As requested, I have embelished the syspref description to more
accurately depict the fallback sequence for email delivery.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Sponsored-by: Catalyst IT
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
1. Set no email addresses in patron record then checkout
items to the patron making the due date in the past
2. Visit patron's home library page: Administration > Libraries
Set a branch email and in global system preferences observe there is no syspref
named RedirectAddressForFailedOverdueNotices
3. Manually run overdue_notices.pl
4. Check the message_queue database table and observe there is a
print overdue notice and a email notice with to_address of the
branch email address
5. Apply patch
6. Run database update:
cd installer/data/mysql
sudo koha-shell <instance_name>
./updatedb.pl
7. Confirm there is a new system preference named:
RedirectAddressForFailedOverdueNotices
Give it a different email address to that in the branch email.
7. Repeat steps 1,3,4 and observe that the failed overdue notices have been
sent to the email defined in RedirectAddressForFailedOverdueNotices
Sponsored-By: Catalyst IT
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When viewing the logs we try to swith the db values like 'cron' to friendly terms like
'Cron job'
The values we use for building the selectors on the page ar eupper case, but DB values are lower case
If we simply force upper case in the comparison we can ensure we always match correctly
To test:
1 - Enable some 'Logs' setting in System preferences
2 - Perform some action in koha that will log
Run a cronjob
Change a syspref
etc.
3 - Browse to Tools-> Log viewer
4 - Click 'Submit' to see all logs
5 - Note the 'Interface' column contains lower case DB values
6 - Apply patch
7 - Reload the page
8 - Values in interface are now Camel cased and more friendly
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Currently the overdues report does the following display:
Patron library = home branch
Home library = holding branch
Holding library = patron branch
This patch corrects the display of libraries in the overdues report.
To test:
0) Do not apply patch
1) Go to http://localhost:8081/cgi-bin/koha/circ/circulation.pl?borrowernumber=51
2) Go to http://localhost:8081/cgi-bin/koha/circ/set-library.pl
3) Choose "Troy"
4) http://localhost:8081/cgi-bin/koha/circ/circulation.pl?borrowernumber=51
5) Checkout "39999000004571" with due date of "09/01/2019 23:59"
Note the facts:
Patron library = Centerville
Home library = Fairview
Holding library = Troy
6) Go to http://localhost:8081/cgi-bin/koha/circ/overdue.pl
7) Change "Columns" visibility to show Holding and Home libraries
8) Note that the libraries are incorrect:
Patron library appears to be: Fairview
Home library appears to be: Troy
Holding library appears to be: Centerville
9) Apply the patch
10) koha-plack --restart kohadev
11) Go to http://localhost:8081/cgi-bin/koha/circ/overdue.pl
12) Change "Columns" visibility to show Holding and Home libraries
13) Note that the libraries are correct:
Patron library appears to be: Centerville
Home library appears to be: Fairview
Holding library appears to be: Troy
Signed-off-by: Emmi Takkinen <emmi.takkinen@outlook.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patchset prevents a non-superlibrarian user from editing a
superlibrarians email address via memberentry. This is to prevent a
privilege escalation vulnerability whereby a user could update a
superlibrarians contact details to match their own and then request a
password reset via the OPAC.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This would prevent any unintended batch renewals as it is easy
to miss the option in the screen.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
For sites with very large amounts of due dates to extend ( tens of thousands ), it can take a very long time of the results to load ( if at all ). It would be good to have a way to bypass the confirmation screen, instead directly updating the due dates before displaying the results.
Test Plan:
1) Apply this patch
2) Browse to tools/batch_extend_due_dates.pl
3) Note the new "Preview results" checkbox
4) Submit form with the checkbox unchecked, due dates should be updated
without previewing the checkouts
5) Submit form with the checkbox checked, tool should function as
it did previously
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Bug 25101: (QA follow-up) Add hint to new option
Adds a hint about the large numbers behind the new
checkbox option.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Bug 25101: (QA follow-up) Fix hint for new option
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan:
Perform some CRUD operations on the news page in staff.
Verify that news on opac and staff respect publicationdate.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Additional capitalization, punctuation, terminolgy and improvements to
text for system preferences:
- Punctuation (such as full stops at the end of sentences)
- Capitalization
- Terminology (staff interface, use of "Don't" instead of "Do not")
- Rearranged/rephrased for better readability
To test:
- Verify that the changes listed are consistent and make sense.
- Check that on the staff interface home page that the window title says
"Koha staff interface".
- Verify that in system preferences the name of the tab for Staff
interface displays correctly, and that clicking on it brings up the
staff interface preferences.
- For Patrons > CollapseFieldsPatronAddForm check that the edit and add
patron form works correctly (edit a patron, add a new patron, check that
labels display correctly).
Staff interface home page
-------------------------
- Change the page title in browser from "Koha staff client" to "Koha
staff interface".
Administration
--------------
Google OpenID Connect:
. GoogleOpenIDConnectAutoRegister: change "Don't Allow" to "Don't allow"
and change "users" to "patrons".
. GoogleOpenIDConnectDefaultBranch: move the input field to the end of
the sentence.
. GoogleOpenIDConnectDefaultCategory: move the input field to the end of
the sentence.
. GoogleOpenIDConnectDomain: reword to "Restrict Google OpenID Connect
to domain (or subdomain of this domain): ____. Leave blank for all
Google domains.".
Interface options:
. SendAllEmailsTo: add a full stop.
Share anonymous usage statistics:
. UsageStatsLibrariesInfo: change "Do not share" to "Don't share"; add a
full stop; for note "Don't share" should be "No".
. most preferences: for note "Don't share" should be "No" (don't share)
(for preferences UsageStatsCountry, UsageStatsGeolocation,
UsageStatsLibrariesInfo, UsageStatsLibraryName, UsageStatsLibraryType,
and UsageStatsLibraryUrl), various edits to make more readable and
consistent.
Authorities
-----------
General
. AuthorityControlledIndicators: change "biblio field" to "bibliographic
field".
. AutoCreateAuthorities: change "do not generate" to "don't generate".
Linker:
. CatalogModuleRelink: change "Do not" to "Don't".
. LinkerKeepStale: change "Do not" to "Don't".
. LinkerModule: change "Default" to "default".
. LinkerOptions: add a full stop.
. LinkerRelink: change "Do not" to "Don't".
Cataloguing
-----------
Display:
. MergeReportFields: change "example:" to "Example:"
Exporting:
. BibtexExportAdditionalFields and RisExportAdditionalFields: change
"Include following" to "Include the following"; add ":" at end of
sentence, change "specificy" to "specify", and add full stops at end of
complete sentences.
Interface:
. EnableAdvancedCatalogingEditor: format NOTE in bold.
Record structure:
. AlternateHoldingsField: change "(This" to "(this", change "; for
instance" to ", for example", remove full stop.
, MarcFieldForCreatorId: format NOTE in bold.
. SubfieldsToAllowForRestrictedBatchmod: change "pref" to "system
preference".
Circulation
-----------
Batch checkout:
. BatchCheckoutsValidCategories: add a full stop.
Checkin policy:
. CalculateFinesOnReturn: only bold "NOTE", not the whole sentence (x2).
. StoreLastBorrower: change "opacreadinghistory/AnonymousPatron" to "the
opacreadinghistory and AnonymousPatron".
. UpdateItemLocationOnCheckin: change note "for these locations only can
location and permanent_location differ," to "for these locations the
location and permanent_location can differ,"
. UpdateNotForLoanStatusOnCheckin: change "E.g.," to "For example,"
Checkout policy:
. AgeRestrictionMarker: change "E.g.," to ". For example,"
. AllFinesNeedOverride: change "system preference noissuescharge" to
"the noissuescharge system preference".
. AllowFineOverride: add "the" before "noissuescharge".
. AllowRenewalLimitOverride: change "with respect to" to "for".
. AutoRemoveOverduesRestrictions: change "Do not" to "Don't".
. DefaultLongOverdueChargeValue: change "user" to "patron".
. ItemsDeniedRenewal: change . "e.g.," to "For example:", format the
note the same as other notes with NOTE in bold.
. OnSiteCheckoutsForce: change "on-site" to "on-site checkout", "(Even"
to "(even", and "user" to "patron".
. RentalFeesCheckoutConfirmation: change "do not ask" to "don't ask".
. RestrictionBlockRenewing: change "If patron" to "If a patron", change
"Allow" and "Block" to "allow" and "block".
. UseTransportCostMatrix: "Transport" to "the transport".
Interface:
. AllowOfflineCirculation: change "Do not enable" to "Don't enable".
. ExportRemoveFields: add a full stop.
. ShowAllCheckins: change "Do not show" to "Don't show".
. UpdateTotalIssuesOnCirc: change "Do not" to "Don't".
Interlibrary loans:
. CirculateILL: add a full stop.
. ILLCheckAvailability: add a full stop.
Self check-in module (sci-main.pl):
. SelfCheckInModule: change "module. (available" to "module (available",
add a full stop.
Self check-out module (sco-main.pl):
. AutoSelfCheckAllowed: change "automatically login" to "automatically
log in".
. WebBasedSelfCheck: change "system. (available" to "system (available",
add a full stop.
Enhanced content
----------------
Novelist Select:
. NovelistSelectStaffView: change "staff" to "staff interface".
Babelthèque:
. Babeltheque_url_js: rewitten
. from "______ Defined the URL for the Babeltheque javascript file
(eg. http://www.babeltheque.com/bw_XX.js)"
. to "Use this URL for the Babelthèque javascript file: ________
(e.g. http://www.babeltheque.com/bw_XX.js)."
. Babeltheque_url_update: rewritten
. from "______ Defined the URL for the Babeltheque update
periodically (eq. http://www.babeltheque.com/.../file.csv.bz2)."
. to "Use this URL for the Babelthèque periodic update: _______ (e.g.
http://www.babeltheque.com/.../file.csv.bz2)."
I18N/L10N
---------
. dateformat and TimeFormat: Change "Note" to "NOTE" to be consistent
with other notes, change <b> tag to <strong> as it is more semantically
correct.
Logs
----
Debugging:
. DumpTemplateVarsIntranet: change "variable" to "variables" and "staff
intranet" to "staff interface".
. DumpTemplateVarsOpac: change "variable" to "variables".
Logging:
. AuthFailureLog: add full stop.
. AuthSuccessLog: add full stop.
OPAC
----
Appearance:
. BiblioDefaultView: change "bib" to "bibliographic".
. HighlightOwnItemsOnOPAC: change ". (Non-XSLT Only)" to " (non-XSLT
only).".
. OpacAdditionalStylesheet: change "specified" to "specific".
. OPACDisplay856uAsImage: change all options in the drop down list so
they start in lowercase.
. OpacHighlightedWords: change ";" to a full stop, add a full stop at
the end.
. OPACHoldingsDefaultSortField: add a full stop.
. OpacMaxItemsToDisplay: change "user" to "patron".
. OPACMySummaryHTML: change "user" to "patron".
. OpacSeparateHoldings: change "user's to "patron's".
. OpacStarRatings: change "user" to "patron" for the drop down option.
. OPACShowUnusedAuthorities: change "Do not show" to "Don't show".
. OPACUserSummary: change "user's to "patron's", change "fines" to
"charges".
. OPACXSLT*: change "Leave" to "leave".
. Remove empty row at bottom of appearance options.
Features:
. OpacBrowser: change "OPAC" to "the OPAC".
. OpacBrowseSearch: reword as "[Enable/Disable] interface for browsing
all holdings (Elasticsearch only)."
. OpacCloud: change "OPAC" to "the OPAC".
. OPACDetailQRCode: change "Don't enable" to "Disable".
. OPACFinesTab: change "Fines" to "charges", change "the My Accouunt" to
"their account". (Should now show as "..patrons to access the charges
tab on their account page on the OPAC."
. OpacHoldNotes: change "Do not allow" to "Don't allow", change "users"
to "patrons".
. OpacResetPassword: change "users" to "patrons", add full stop.
. SocialNetworks: change "in opac" to "on the OPAC".
Note: Also deleted lines with # in front of them for the OpacBrowser and
OpacCloud system preferences in the Policy section - these look like
duplicated entries to me (previously lines 600-611).
Policy:
. OPACFineNoRenewalsIncludeCredits: change "users" to "patrons".
Self registration and modification:
. PatronSelfRegistrationConfirmEmail: change "Do not require" to "Don't
require", change "users" to "patrons".
. PatronSelfRegistrationEmailMustBeUnique: change "Do not consider" to
"Don't consider".
. PatronSelfRegistrationPrefillForm: change "Do not display and prefill"
to "Don't display and prefill".
Patrons
-------
General:
. AllowPatronToControlAutorenewal: add full stop.
Notices and notifications:
. EnhancedMessagingPreferences: change "Staff" to "staff".
- FallbackToSMSIfNoEmail: change "Send" to "sending".
Patron forms:
. BorrowerUnwantedField: add full stop.
. CollapseFieldsPatronAddForm:
. Dropdown list changes:
.. "Organization/Patron identity" => "Patron identity".
.. "OPAC/Staff login" to "OPAC/Staff interface login".
. Requires changes to the memberentrygen.tt - check that the add and
edit form for a patron dispaly correctly:
.. change "Contact" to "Contact information".
.. change "Library set-up" to "Library setup".
.. change "OPAC/Staff login" to "OPAC/Staff interface login".
Patron relationships:
. PrefillGuaranteeField: change drop down list option "Main address -
street number" to "Main address - Street number" to match with format of
other entries.
Security:
. RequireStrongPassword: change "More" to "more".
Searching
---------
Search form:
. AdvancedSearchTypes: change "staff-side" to "staff interface".
. expandedSearchOption: change "staff" to "staff interface".
Serials
-------
. makePreviousSerialAvailable: change "Do not make" to Don't make";
"syspref" to "system preference".
. PreserveSerialNotes: change "Do not" to "Don't".
. RoutingListNote: change "Include following" to "Include the following"
Staff interface
---------------
Tab label and link:
. This tab was previously labelled "Staff client".
. Change tab label on the left hand side from "Staff client" to "Staff
interface".
. Change URL when selected from "preferences.pl?tab=staff_client" to
"preferences.pl?tab=staff_interface".
. Check that the link works as expected.
Appearance:
. IntranetFavicon: change "Staff" to "staff".
Tools
-----
Reports:
. NumSavedReports: change "Saved reports page" to "saved reports page".
Web services
------------
IdRef:
. IdRef: change "allows to request" to "allows requests for".
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
- Rephrases LoadSearchHistoryToTheFirstLoggedUser system preference
- Consistently use "staff interface"
- Add ending punctuation to some preferences
To test:
- Read through the Searching system preferences
- Verify consistent use of staff interface
- Verify LoadSearchHistoryToTheFirstLoggedUser description is
improved
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This changes "staff client" to "staff interface" and fixes capitalization
in a couple of cases.
For terminology changes see:
https://wiki.koha-community.org/wiki/Terminology#S
To test:
- Read through the preferences of the "staff interface" tab.
- Staff interface should be used consistently.
- Firefox "PlugIn" was changed to "add-on" reflecting Mozilla's
own terminology.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
