The UT was buggy. I have just fix that in another patch on bug 12555.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 8307 introduces the AcqItemSetSubfieldsWhenReceived pref.
You can now update an item field on receiving (if you create items on
ordering).
But if the receipt is cancel, there is no way to revert these changes.
This patch adds a new pref AcqItemSetSubfieldsWhenReceiptIsCancelled to
allow to revert changes previously done on receiving
Test plan:
0/ Set the AcqCreateItems to 'ordering'
1/ Fill AcqItemSetSubfieldsWhenReceived with o=1 (UNIMARC) or 7=1
(MARC21).
2/ Fill AcqItemSetSubfieldsWhenReceiptIsCancelled with o=2 (UNIMARC) or
7=2 (MARC21)
3/ Create an order with some items
4/ Receive the order and verify the notforloan value is set to 1
5/ Cancel the receipt and verify the notforloan value is set to 2
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Before Bug 9811, the patron search searched on extended attributes.
This patch restore this behavior.
Test plan:
0/ Create a patron attribute PA
1/ Create a patron A (cardnumber CNA) with PA="foo"
2/ Create a patron B (cardnumber CNB) with PA="foo bar"
3/ Search for CNA should redirect on the patron detail page.
4/ Search for "foo" should display the search result with 2 results.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
'Searchable' patron attributes can now be searched for again.
Works as described, passes stests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
- Set opacuserlogin and OPACPatronDetails to allow
- Log in to OPAC, go to 'your personal details'
- Change Home library
- Go to staff client: Patrons requesting modifications (/cgi-bin/koha/members/members-update.pl)
- Without patch, you do not see the change request, but can Approve, Deny or Ignore it
- With patch, you see the change request, indicating the Home library (branchcode)
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
I "slightly" rewrote the patch so it applies on current master.
Item field permanent location should not be mapped to the MARC structure.
If a library did so, this dbrev will print a warning.
If refers to report 12818 for help in moving the data to more_subfields_xml.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested by putting permanent_location in and out of the MARC structure.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes the commented line for permanent_location.
It adds a more general comment.
Adjusts the exists check on permanent_location.
Adds a reference to bug 12817 that will deal with paidfor similarly.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
A quick fix to prevent more damages.
No perceived side-effects so far.
Signed-off-by: David Cook <dcook@prosentient.com.au>
This is actually a perfectly good fix for this issue. I've changed
the explanatory comment to explain why.
Another option would be to remove the 'exists' check in the sub
_do_column_fixes_for_mod(), but this is just as functional.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Detailed comment on Bugzilla.
Adding a small follow-up.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The cronjob longoverdue.pl does not require that an item marked as lost
be returned automatically, but there is a line in ModItem that
automatically marks the item's onloan as false if itemlost is set!
Test Plan:
1) Mark an item as lost with longoverdue.pl, without --mark-returned
2) Inspect the db, note that items.onloan is now 0
3) Apply this patch
4) Mark repeat step 1
5) Inspect the db, noe that items.onloan is still 1
6) Test marking an item as lost from staff interface,
ensure there are no regressions.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Patch works according to test plan and fixes a data loss bug.
Some notes:
- This patch would be nicer with a regression test.
- Also checked that returning the item removes lost status and onloan still.
- Tried to test with --mark-returned, but couldn't get it to
return my item neither with nor without the patch. (see comment on
bug report)
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
- Go to Acquisitions, select a bookshop and a basket, click 'Add to basket':'From an external source'
- Do a search
- Your search terms should display at the top of the results page.
- Repeat search with several combinations of search terms (with and without results).
- Check the output for correct html.
Fields Raw (any) and Standard ID removed / MV
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script, works as described, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test plan:
Go to Z39.50/SRU servers, click Help and read the text.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Additions to help file, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes empty onclick attribute from memberentrygen.tt
To test:
Apply patch.
Use git grep 'onclick=""' to make sure that there are no more empty onlick attributes
Go to Home > patrons and click 'New patron'
Check HTML of 'Cancel' link
Make sure that 'Cancel' link still works
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Changes the link to cancel adding a manual restriction.
No regressions found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch fixes several capitalization issues in the about page.
To test:
- Go to the about page
=> FAIL: you should see
* Server Information (tab)
* Koha Team (tab)
* Koha Timeline (tab)
* Additional Thanks To... (at the bottom of the Koha Team tab
- Apply the patch and reload
=> SUCCESS: you should see
* Server information
* Koha team
* Timeline
* Additional thanks to...
- Sign off :-D
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
String changes, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
- Go to cataloguing
- Perform a z39.50 search with no results
- Check "Try another search" is displayed
- Perform a z39.50 search with results
- Verify display is correct as well.
Signed-off-by: George Williams <georgew@latahlibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch removes the $facets_info calculation from the _get_facets_data_from_record
sub so it is not done for each record. It introduces a new sub, _get_facets_info
that is called from the getRecords loop, that does the job only once.
To test:
- Apply on top of the previous patches
- Run
$ prove -v t/db_dependent/Search.t
=> SUCCESS: _get_facets_info gets tested and it passes for both MARC21 and UNIMARC.
Facets rendering should remain unchaged on the UI.
- Sign off :-D
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds a test for field 100, to skip it on facet calculation
if ind1=z.
To test:
- Have IncludeSeeFromInSearches set.
- Create a biblio record, when adding an author, create a new authority record
that contains a 400$a field (see from).
- Rebuild zebra db.
- Search for the record making sure the search returns more than one record.
=> FAIL: the facets contain the 'see from' field.
- Run
$ prove -v t/db_dependent/Search.t
=> FAIL: it fails
- Apply the patch
- Run
$ prove -v t/db_dependent/Search.t
=> SUCCESS: it passes
- Re-run the search, notice the 'see from' doesn't show anymore on the facets.
- Sign off :-D
Edit: minor stylistic change
Regards
To+
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch refactors the facet extraction loop into a proper function.
The loop is changed so the MARC::Record objects are created only once
instead of the old/current behaviour: once for each defined facet (in
C4::Koha::getFacets).
To test:
- Apply the patch
=> SUCCESS: verify facets functionality remains unchanged.
- Run:
$ prove -v t/db_dependent/Search.t
=> SUCCESS: tests for _get_facets_data_from_record fail, because
100$a is considered for fields with indicator 1=z (field added
by IncludeSeeFromInSearches syspref).
- Sign off :-D
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Some libraries would like the ability choose to display the home branch
on search results while having circulation rules based on the holding
branch. This is currently impossible because both the display of the
branch in search results, and the selection of the home or holding
branch for circulation rules are controlled by the same system
preference: HomeOrHoldingBranch. This preference is described as being
used only for circulation rules, and makes no mention of its use for
display control. The display control should be split off into a separate
preference.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Note the value of the new system preference StaffSearchResultsDisplayBranch
matches the current value of HomeOrHoldingBranch
4) Set the preference to home branch
5) Perform a staff catalog search with results having items with differing home and
holding branches.
6) Note the home branch displays
7) Set the preference to holding branch
8) Repeat step 5
9) Note the holding branch displays
Signed-off-by: Jason Robb <jrobb@sekls.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, logic is now tied to a new system preference.
Passes tests and QA script.
In opac-search two regexes are added for the results of splitting the
pref AdvancedSearchTypes, allowing spaces before and after the names.
The same regexes should be added to catalogue/search.pl to have the
same behavior there.
Test plan:
Set AdvancedSearchTypes to "itemtypes | ccode | loc " (no quotes).
Check OPAC and staff with and without this patch.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch affects only the area displayed on Advanced Search
by setting the AdvancedSearchTypes OPAC system preference
accordingly. Prior to this patch, no filtering based on
OpacHiddenItems was done. This patch determines if itemtypes,
collections, or shelving locations are hidden and prevents
them from being shown.
TEST PLAN
---------
1) Back up your DB (always handy)
2) Set the Searching system preference AdvancedSearchTypes to:
'itemtypes|ccode|loc' (without the single quotes).
3) Set the OPAC system preference OpacHiddenItems to include the
lines:
itype: [{list of itemtype codes separated by commas}]
location: [{list of comma delimited shelving location codes}]
ccode: [{list of comma delimited collection codes}]
Make sure to exclude one value for each, so there will be at
least one known thing on each tab.
4) Open the OPAC.
5) Click on 'Advanced Search'
-- three tabs appear: Itemtypes, Collection, Shelving location
-- Everything is visible
6) Set the Searching system preference AdvancedSearchTypes to:
'itemtypes | ccode | loc' (without the single quotes).
7) Refresh the OPAC.
-- There will be three tabs, but ugliness ensues.
8) Apply the patch
9) Refresh the OPAC.
-- You will see: Itemtypes, Collection, Shelving location
-- Only excluded values from OpacHiddenItems will be seen.
10) Run koha qa test tools
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
All tests pass
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Small rewording in comment only.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Add LOC SRU server to sample servers installed.
This patch modifies four language files: de, en, es and nb.
For the other languages this may not be useful.
Test plan:
You could test this by using the webinstaller.
But you could also (backup) and delete your records in z3950servers, and
run the sample_z3950_servers.sql file from the command line.
Check if you see the new SRU server.
Tested using mysql. I truncated the table (to reset the IDs as well) and then ran the file. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test Plan:
1) Set ExpireReservesMaxPickUpDelay
2) Set ReservesMaxPickUpDelay to 1
3) Place a hold, set it to waiting
4) Using the MySQL console, modify the waiting date and set it to the
day before yesterday.
5) Set today as a holiday for the pickup branch in question.
6) Run misc/cronjobs/holds/cancel_expired_holds.pl
7) The hold should remain unchanged
8) Remove today as a holiday
9) Run misc/cronjobs/holds/cancel_expired_holds.pl again
10) The hold should now be canceled
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Leila <koha.aixmarseille@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- global replaced HightedStopWords syspref with NotHightedWords for
clarification purposes. Hopefully this is a bit better and still
not too verbose.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, fixed some tabs and a typo.
- Added functionality to new bootstrap theme
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
- changed sample words to and|or|not in sysprefs.sql and
updatedatabase
- changed systempreference name from OpacHighlightedStopwords
to HighlightedStopwords, as it also works for the staff
results page
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This patch adds a system preference to control stopwords used to
prevent operators and other 'minor' words from being highlighted
in search results when the OpacHighlightWords syspref is enabled
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Works as advertised, I fixed the updatedatabase to use XXX so it won't
clash as much
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed a conflict in updatedatabase.pl.
Also fixed tabs in opac-detail.tt
Feature passes all tests and QA script now.
Tested in intranet and OPAC with different words and searches.
Works on results pages and OPAC detail page.
Highlighting and unhighlighting still works correctly.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script, works as expected.
Patch sponsored by the CCSR ( http://www.ccsr.qc.ca )
This new patch builds on the work of Bug 12164 by allowing the
user to enter a new name (budget_period_description) for the
cloned budget.
A test was added to t/db_dependent/Budgets.t.
Sponsored-by: CCSR
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Edit: added the sponsored-by line.
For those who would not understand the two version numbers and come up
with the idea to check the Help page, some text is added.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds information about required perl module versions to the
'About' page.
To test:
Apply patch.
In staff client, go to 'About', tab 'Perl modules'
The required version numbers should display in small print next to or
underneath the module names.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Incorrect display of Email Address in Alternate Address Patron Details
Without patch, mail from primary address is displayed in Alternate address
With patch, correct mail address is displayed
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, no problems found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Currently, if you have holds charges, they are not taken into
consideration when circulating items.
Manual Invoices, and rental charges are governed by a systempreference
Holds are never counted
And all other charges (overdues, lost items etc) are counted
This patch adds a systempreference to allow Hold charges to be counted
as well.
To test
1/ Set a borrower category to have holds charges
2/ Place a hold for a borrower in that category
3/ Go to checkout, notice that charge is not showing or blocking on
that screen
4/ apply patch
5/ notice that charge now shows on checkout
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
- Install two language variants (e.g. de-DE and de-CH)
- Create OPAC news for each of them
- Verify that they are displayed in OPAC as appropriate
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works Ok, no koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works ok, all installed languages now show up in the pull downs
and display for the selected language in the OPAC.
Passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Replace "Zip code" with "Zip/Postal code" which is used in
members/memberentry.pl and members/moremember.pl.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It would be helpful to be able to use the batch patron modification tool
to update city, state, zipcode, and country. This patch adds this
functionality.
This patch corrects an error in the batch modification script which
would have incorrectly marked first name as required if surname was
required.
This patch also converts the table sorting configuration to use table
header class names instead of index-based sorting for columns containing
dates.
To test, apply the patch and submit a batch of patrons to the batch
patron modification tool (Tools -> Batch patron modification).
In the list of patrons which will be modified you should see columns for
city, state, zipcode, and country. Table sorting should work correctly
without errors, including the registration and expiry date columns.
In the list of fields which can be batch modified you should see inputs
for city, state zipcode, and country. These fields should correctly
reflect mandatory/not mandatory based on the BorrowerMandatoryField
system preference.
Submit batch changes to a variety of fields and confirm that changes are
applied correctly. On the page of results the table should correctly
show all fields and be sorted correctly.
Signed-off-by: cachan <pierre.lorgue@ens-cachan.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch adds options to include/exclude files by matching their names.
Also modifies current code to check only filenames (not dirs)
Checking is case insensitive !!
NOTE: The difference between -f and -m is subtle, but important.
They differs mainly on update,: -f do a merge, -m a replace
To test after patch:
A) Include only 'normarc'
1. create
cd misc/translator
perl tmpl_process3.pl create -i ../../koha-tmpl/opac-tmpl/bootstrap/en -s normarc.po -r -m normarc
- check provenance of strings
egrep "^#:" normarc.po | cut -d":" -f2 | sort | uniq
- only files with normarc in their names must be present
2. update
perl tmpl_process3.pl update -i ../../koha-tmpl/opac-tmpl/bootstrap/en -s normarc.po -r -m normarc
- repeat check
3. install
mkdir test
perl tmpl_process3.pl install -i ../../koha-tmpl/opac-tmpl/bootstrap/en -o ./test -s normarc.po -r -m normarc
- check name of created files
rm -rf test normarc.po
B) Exclude
4. create
perl tmpl_process3.pl create -i ../../koha-tmpl/opac-tmpl/bootstrap/en -s xnormarc.po -r -n normarc
- check provenance
egrep "^#:" xnormarc.po | cut -d":" -f2 | sort | uniq | grep -i normarc
- there must be no results
5. update
perl tmpl_process3.pl update -i ../../koha-tmpl/opac-tmpl/bootstrap/en -s xnormarc.po -r -n normarc
- check provenance
6. install
mkdir test
perl tmpl_process3.pl install -i ../../koha-tmpl/opac-tmpl/bootstrap/en -o ./test -s xnormarc.po -r -n normarc
- check files
find test | grep -i normarc
- there must be no results
You can also try another combination, use for example "-m patron -m user -m bottom" (or use -n)
or mixed "-m marc -n normarc", do create/install and look filenames
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
