Like Jonathan said:
The interpolation of a variable on including a file caused an unexpected
error:
Template process failed: undef error - Not a GLOB reference at
/usr/lib/i386-linux-gnu/perl5/5.20/Template/Provider.pm line 619.
Replaced it with a SWITCH, like the other patch for this similar error.
Signed-off-by: Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
The interpolation of a variable on including a file caused an unexpected
error:
Template process failed: undef error - Not a GLOB reference at
/usr/lib/i386-linux-gnu/perl5/5.20/Template/Provider.pm line 619.
The easier fix is to replace it with a SWITCH.
Signed-off-by: Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
There is no need to escape the html generated by the XSLT.
Signed-off-by: Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
To make life easier when multiple instances are uploading temporary
files to Koha, this patch adds the database name to the upload subfolder
in your /tmp folder.
Note: Although multiple instances could share the same subfolder for
temporary storage (hashvalue is based on a timestamp too), it will be
better to separate them for efficient housekeeping (removing older or
partial files with a cronjob etc.)
Since multiple instances come with separate permissions, keeping them in
separate folders will be much simpler.
Permanent storage is not affected by this patch. The location of permanent
storage is ruled by the upload_path in each config file. Sharing that
space is not recommended too.
Although it may not be strictly necessary yet to remove files from the old
temp storage folder (before the 3.22 release), the accompanying db rev
performs that housekeeping task.
Test plan:
[1] Do not yet apply this patch. Upload a temporary file (use the
tools/upload.pl script without selecting a category).
[2] Check /tmp/koha_upload.
[3] Apply this patch. Run the db rev with web installer.
[4] Upload another temporary file.
[5] Check /tmp for folder [your_database]_upload.
[6] Check that /tmp/koha_upload is gone and the associated records too.
[7] Run the adjusted t/db../Upload.t
Followed test plan. Could not do steps before applying patch [1]-[2]
(I suppose a local permission problem).
After applying patch and updating db file appears in /tmp/[database]
as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch does:
[1] It removes some unused modules.
[2] It adds some options not listed in the synopsis.
[3] It removes an unused sql expression from one query.
Note: In fines related code the third parameter of CalcFine sometimes
is named as days_overdue too.
[4] Corrects a few typos in comments or pod.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
There is no need to do this job in Perl, MySQL could do it instead.
The idea is to only retrieve the issues info which could be overdued.
To test:
1/ Run the script
2/ Apply the patch
3/ Run the script again, notice the exact same results but execution time is faster
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Batch patron modification should not offer to update patron attributes
with values which are designated as unique since such attributes are
required to be unique to a single patron.
Test plan:
Create some patron attributes, some should be unique.
Use the batch patron modification tool to modify patrons.
With this patch, the patron attributes marked as unique won't be
display anymore.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Test plan:
Add/edit/remove item types from the administration module
(admin/itemtypes.pl).
You should get message feedback after each action.
Don't forget to play with the image and try to remove an item type
linked to records (you should not be able to remove it).
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
C4::ItemType can be now removed safely, there is no use of this module.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch mainly replaces C4::ItemType->all with
Koha::ItemTypes->search.
Test plan:
At the places where the C4::ItemType module was used, confirm there is
no regression:
- acqui/neworderempty.pl
- catalogue/itemsearch.pl
- admin/item_circulation_alerts.pl
and the 2 cataloguing plugins:
- marc21_linking_section.pl
- unimarc_field_4XX.pl
QA step:
prove t/db_dependent/HoldsQueue.t should return green
Note that the tests were buggy.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
On the 3 following pages, the patron image was not displayed:
members/discharge.pl
members/pay.pl
members/paycollect.pl
Test plan:
Apply this patch and confirm the image is now displayed
Followed test plan, image displays as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Revert "Bug 6679 - [SIGNED-OFF] fix 2 perlcritic violations in C4/Installer/PerlModules.pm"
This reverts commit 0e356b214e.
Fixing the evals in PerlModules.pm to pass perl critic has caused
a regression. If appears that using a block eval will not work here,
at least not in its current form.
This patch includes:
[1] Adds primary key borrowernumber to new table.
[2] Fixes collation.
[3] Removes manual PK in DBIx schema file.
[4] Fixes typo CompletePasswordRevovery.
[5] Removes use strict from opac-password-recovery; Modern::Perl is used.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Koha already has a sub that creates salts, so lets use that instead of math::Random::secure, so as not to add a new dependency.
Made the references to "Forgotten password" consistent, including adding it to the title of the page.
Also removed the individual error for "this email doesn't belong to this account" as that could expose the existence of a login, which I think we'd rather not do.
Made some of the text more grammatically correct, and more library specific.
To test:
Apply on top of all of the other patches.
All the usual checks, plus make sure there are no typos in any text references.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
This is a collection of changes taken from different comments (but mostly comment 21 and comment 122).
Passes qa and prove, on my machine at least.
There's also a new test file, Passwordrecovery.t, which covers every method of C4::Passwordrecovery.
To test:
All normal checks plus :
1/ Receive the email
2/ Click on the link
3/ Change the pwd
4/ Click again on the link
5/ You should immediately get an error message
Problems with Math/Random/Secure.pm, is solved in following patch, signing off
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Check to make sure the messages from the qa checker are gone.
Note I'm not sure about this one because my test tools are apparently broken, and I can't get the error to manifest.
Amended patch by Jonathan Druart: Add a blank line before =head2
It now passes.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Use the new library to search for borrowers.
Changed how the $borrower variable is used since it is now a Koha::Borrower object.
Removed the $protocol parameter from the generated link. It should be included in the OPACBaseURL syspref.
modified: C4/Passwordrecovery.pm
modified: opac/opac-password-recovery.pl
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Followup changes text from "The user can reset | can not reset their password on OPAC" to "Library users are allowed | not allowed to recover their password via e-mail in the OPAC"
This change more clearly differentiates the purpose of this new preference from OpacPasswordChange.
Bug 8753 - followup - update text for link to match common UI paradigms, fixes OpacPublic disabled view
Also corrects OpacNav being included on the reset page on private catalogues.
Updated the link for forgotten passwords to more closely match common UI paradigms, i.e. Facebook and Twitter
To test:
apply all patches, link should now be the less verbose "Forgot your password?"
disable OpacPublic, anything in opacnav should not appear (you may need to add something to opacnav to test properly)
Bug 8753 - [followup] fix the title on opac-password-recovery.tt
The title stanza was missing a <title></title> around it, causing the extra text to appear.
To test, apply all patches and make sure it looks ok and there is no extra text at the top or bottom of the page.
Bug 8753 - [followup} Correcting spelling mistakes
Make sure it all still works
Bug 8753 - [followup] fix error when no information is provided
To test:
All normal checks plus make sure that a nice error is displayed when no data is provided.
fixing the deprecated thing
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
I've addressed a lot of Liz Rea's points.
1. I have moved the code from updatedatabase.pl and kohastructure.sql to a file in the atomicupdates directory.
1a. The feature is now off by default when the atomicupdate is run.
2. The password reset link is now visible on the home page, in the modal box and on opac-user.pl .
3. The password recovery pages now use bootstrap markup.
4. I am unsure here. I see "New Password:" and "Confirm new password:".
5. This should still work :).
6. I could not reproduce.
7. I have added the userid field.
You can now reset the password by submitting either your useid or email address.
Both fields can be filled, but the email address must be one of the borrower's (email, emailpro or b_email).
When entering only the email address and two borrowers use that same address, the system tells the user to try with another address or to specify his userid.
8. The text is in the atomicupdate file. Have at it, anyone.
Concerning the email. It is inconvenient for the use to have to wait X minutes for the message queue the be processed.
Maybe we could add a sub in Letters.pm that:
Takes the same argments as EnqueueLetter
Sends the letter.
Saves the letter in the message queue with a 'sent' status.
TEST PLAN:
Setup)
1) apply the patch
2) go to system preferences OPAC>>Privacy and set 'OpacResetPassword' to ON.
2b) make sure that OpacPasswordChange is also ON.
A)
1) refresh front page, click on 'Forgot your password' and enter a VALID address
1b) Also try an INVALID address (valid yet not in your koha db). An error message will show up.
2) An email should be received at that address with a link.
3) Follow the link in the mail to fill the new password.
Until a satisfactory new password is entered, the old password is not reset.
4) Go to main page try the new password.
B)
1) Repeat the password reset, this time use the userid (username) field.
2) Try to reset the password using a userid and an email not linked to the account. An error appears.
3) Make sure the borrower has many available email addresses.
4) For each email, reset the password using both the userid and the email. The link should be sent to the specified address
C)
1) Make sure two borrowers use the same email.
2) Repeat the reset procedure in test case A). An error message appears
http://bugs.koha-community.org/show_bug.cgi?id=13068
Author: Maxime Beaulieu <maxime.beaulieu@inlibro.com>
Followed test plan. Works as described.
Signed-off-by: Marc Veron <veron@veron.ch>
New sign-off after testing all patches together
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
This patch allows to put a hold on an item that is already checked out or reserved.
To test:
- Check out an item A
- Put a hold on an item B
- Verify that the staff user has permission to put holds
- Check out item A to a patron X
- Try to checkout item A to a patron Y
- Verify that you see underneath the buttons for Checkin/Checkout a link
with following text: "Click here to place hold for [Patron X' name]"
- Verify that the link is stylable (div class circ-scheckoutplacehold)
- Verify that the link takes you to the page to place a hold on this biblio
for patron Y
- Do the same for item B and verify that it works for reserved items as well.
- Repeat steps above for a patron who has restrictions, verify that the link
does not appear
- Log in with a staff member who has no permission to place holds
- Repeat steps above for a patron without restrictions, verify that the link
does not appear.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
1/ Do not allow invalid date ranges (from > to) (datepicker only)
2/ Relabel "From:" to "From" for consistency
3/ Fix MIME type for CSV
4/ Use Koha::DateUtils instead of C4::Dates
5/ Use placeholders in SQL query
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Date filter indexes are 13, 14, 15, 16,
not 14, 15, 16, 17
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works, no koha-qa errors (some message for the deleted file)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
$hasdewey and $haslccn were hardcoded to 0
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
- Add 3 options for cells value
- Titles count "COUNT (biblionumber)"
- Items count "COUNT (itemnumber)" (current behavior)
- Deleted items count "COUNT (deleteditems.itemnumber)"
- Add to selectable rows, colums and filters:
- items.notforloan
- items.materials
For each of these fields, retrieve the label in the default cataloging
framework.
If no MARC field is mapped to the field in question, it does not show
this line in the wizard.
If the MARC field is associated with a list of authorized values, it
displays a dropdown list for the filter, otherwise it displays a text
field.
- Add to selectable rows, columns and filters:
- items.dateaccessioned (creation date)
- deleteditems.timestamp (deletion date) (Only if the third option (eg
count deleted items) is selected)
- Add unit tests for GetMarcSubfieldStructureFromKohaField
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Add two scripts for indexing: koha-index and koha-index-daemon.
Documentation:
perldoc koha-index
perldoc koha-index-daemon
New dependencies:
MooseX::Getopt
MooseX::RW
AnyEvent::Processor
Available as a Debian package: libmoosex-getopt-perl
Test plan:
- Apply the patch
- Install dependencies, if necessary
- Reindex a whole biblio catalog:
koha-index --verbose
- Reindex a whole authorities catalog:
koha-index --source authority --verbose
- Modify 1 biblio record, and index it:
koha-index --select queue
- Modifiy 1 authority record, and index it:
koha-index --select queue --source authority
- Run indexing daemon, with a 15s timeout:
koha-index-daemon --timeout 15
- Modify a biblio record: wait 15s, and see
- Modify an authority record: wait 15s, and see
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works well, followed test plan without problems
One comment: perhaps an option for koha-index-daemon
to work quietly, without printing information.
No koha-qa errors, but new files don't have license,
fixed in followup
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
'Withdrawn' is an authorised value just like 'Lost' and 'Damaged,' so
the item detail screen should offer the same means of selecting one of
multiple values.
This patch re-uses the same template markup and code 'Lost' and 'Damage'
use to make it possible to select a specific withdrawn value.
To test you should have multiple values entered for the authorised value
category 'WITHDRAWN'.
1. Apply the patch and locate any record in the catalog.
2. From the detail screen, click the barcode in the items table to go to
the item detail page.
3. Confirm that there is a dropdown list of choices for 'Withdrawn
status.'
4. Try both setting and unsetting various withdrawn statuses.
5. Confirm that setting Lost or Damaged statuses.
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
1. cd kohaclone/debian/scripts
2. sudo koha-passwd instance | cat
Output should be password only
3. sudo koha-passwd instance
Output should be "Password for $instance is: $password"
Does this get at what you were wanting, Robin?
NOTE:
$ cd ~
$ sudo mkdir /etc/koha
$ sudo mkdir /etc/koha/sites
$ sudo mkdir /etc/koha/sites/library
$ sudo ln -s ~/koha-dev/etc/koha-conf.xml /etc/koha/sites/library/koha-conf.xml
$ sudo mkdir /usr/share/koha
$ sudo ln -s ~/kohaclone/debian/scripts /usr/share/koha/bin
This will fake out your system enough to get koha-passwd to run in your git
system. Since you are using your git system, no need for the sudo's in
steps 2 & 3. And no need to roll a custom build to test it.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
'read anykey' actually requires enter under sh.
This patch changes the string from:
'Press any key to clear the screen...'
to
'Press enter to clear the screen...'
TEST PLAN
---------
1) Apply the first two patches
2) Trigger the script.
2) Press 'q' or anything other than enter when prompted.
--- You could type a whole sentence! Oops!
3) Press enter.
4) Apply this patch
5) Trigger the script.
6) Be happy that you aren't told any key will work.
7) run koha qa tools
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
http://bugs.koha-community.org/show_bug.cgi?id=13141
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
* makes sure output is not on the line with the prompt
* adds ability to clear screen after password display
Same test plan as for original bug.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
to test...
1/ run without any args, and get some help
# koha-passwd
Displays a Koha instance's password.
Usage: /usr/sbin/koha-passwd instancename1 instancename2...
Missing instance name...
2/ run with a bad instance, get an error
# koha-passwd xxxxx
Unknown instance xxxxx
3/ run with a correct instance, get a password
# koha-passwd koha1
foofoo69
4/ run with many instances, get many passwords
# koha-passwd koha1 koha2 koha3
foofoo69
foofoo68
foofoo67
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
-Fixing default option checked for OAI-DC in OPAC modal
-Move OPAC modal to opac-detail-sidebar.inc to display in MARC view
and ISBD view
This follow-up fix the QA comment in comment 149
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Above issue fixed & usable also in MARC/ISBD view
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
