This patch makes the route handle overriding pickup locations by passing
the 'x-koha-override' header (set to 'any').
To test:
1. Apply the unit tests patch
2. Run:
$ kshell
k$ prove t/db_dependent/api/v1/holds.t
=> FAIL: Tests fail, because things cannot be overridden ATM.
3. Apply this patch
4. Repeat 2
=> SUCCESS: Tests pass!
5. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds unit tests for the PUT /holds/:hold_id route so it
accepts the x-koha-override header and is able to override pickup
location constraints.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds regression tests for overridding pickup locations, which
was inadvertedly not covered by the original dev. What this does, is
moving the $can_override variable definition above, and avoid returning
400 if conditions are not met for the passed pickup_library_id, when
$can_override is true.
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/api/v1/holds.t
=> SUCCESS: Tests pass!
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes the tests mock things so the complex holds scenarios
where existing data could interfere, don't get in the middle with what
we need to test.
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/api/v1/holds.t
=> SUCCESS: Nothing broke
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
I added a few tests to cover additional cases and found the operator precedence
was failing, switched 'and' to '&&'
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 26181 introduced a way to override behavior through a new header,
x-koha-override. And bug 27760 introduced a generic approach to handle
x-koha-override.
This patchset makes the POST /api/v1/holds route rely on this new way of
handling x-koha-override instead of doing it manually.
The header is added to the spec as a parameter.
Note: the header should be defined as:
"type": "array",
"collectionFormat": "csv",
"items": {
"type": "string",
"enum": [
"any"
]
}
but the versions of JSON::Validator we use have lots of bugs related to
header type coercion, so it just doesn't work. The changelog for
JSON::Validator is fairly elocuent about it.
The override now takes a list of valid keywords (right now only 'any'
but it would be fairly straight-forward to add a fairly granular set of
options based on each possible AddReserve failure.
To test:
1. Apply this patches
2. Run:
$ kshell
k$ prove t/db_dependent/api/v1/holds.t
=> SUCCESS: Tests pass!
4. Sign off!
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch improves the POD for the added helper, and also adds
references to the JSON::Validator issue that explains the current
implementation. A FIXME is added for when we upgrade our used
JSON::Validator version.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
By making this method call the helper, we make sure the overrides
hashref is available to any controller to make us of it.
To test:
1. Apply this patches
2. Run:
$ kshell
k$ prove t/db_dependent/api/v1/auth_authenticate_api_request.t \
t/Koha/REST/Plugin/Query.t
=> SUCCESS: Tests pass! The helper works as expected and the
authenticate_api_request method invokes it!
3. Sign off :-D
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a simple helper that reads the x-koha-override request
header, and processes it to stash a hashref with the passed overrides.
No check on the overrides themselves is done, as they should be
validated using the OpenAPI spec.
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/api/v1/auth_authenticate_api_request.t
=> SUCCESS: Tests pass!
3. Sign off :-D
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes the dropdown width inherit the existing style.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes the form for placing a hold, use the API to retrieve
the valid pickup locations for a biblio.
To test:
1 - In Circulation and fines rules > Default checkout, hold and return policy, change 'Hold pickup library match' to 'item's home library'
2 - Set AllowHoldPolicyOverride system preference to Allow
3 - Try placing a hold on a biblio with several items.
Ensure that there is one item with homebranch of the patrons branch and
one at another branch
4 - Note the pickup location dropdown lists all branches, even those not matching the policy (Item's home library)
5 - FAIL: There's no sign they are overrides to rules
6 - Apply the patch
7 - Repeat 3
8 - SUCCESS: Same behavior as before all libraires listed, but there's a sign
+ tooltip for overridden ones.
9 - Sign off :-D
Note: styling follow-up coming
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the mentioned route. It does so by:
- Adding the new path in paths.json
- Adding the full route spec in biblios.json
- Adds a controller method that takes care of the task
To test:
1. Apply this patches
2. Run:
$ kshell
k$ prove t/db_dependent/api/v1/biblios.t
=> SUCCESS: Tests pass!
3. Play with your favourite REST tool. Pay special care to
the AllowHoldPolicyOverride syspref and the expected behaviors.
=> SUCCESS: All works as expected
4. Sign off :-D
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It says "At least one item is available at this library" instead of
"Return claims must be processed from the patron details page"
(like on cataloguing/additem)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
From https://datatables.net/faqs/index
"When attaching events to cells in a table controlled by DataTables, you need
to be careful how it is done. Because DataTables removes nodes from the DOM,
events applied with a static event listener might not be able to bind
themselves to all nodes in the table."
Before this patch, there were three non-functional buttons on upload search
result page, "+ Choose", "Download" and "Delete".
This patch binds the handlers to a static element so that the three buttons
in upload.tt on page two onwards are functional again.
To test:
1. This test is for the "Download" and "Delete" buttons
1.1. Before applying patch, go to cgi-bin/koha/tools/upload.pl
1.2. Make sure you have at least 21 files uploaded
1.3. Perform a search via "Search term" form so that at least 21 results are
returned (e.g. a dot (.) as the search term should return all files with
filetype)
1.4. Press "Download" and "Delete" for the first result row, it should work
as expected (no need to actually delete the file - as long as it pops up
a confirmation, it works as expected)
1.5. Go to page 2 of results
1.6. Press "Download" and "Delete" for the first result in page 2
1.7. Observe nothing happening
1.8. Apply patch
1.9. Repeat steps 3-6
1.10. Observe buttons working as expected
2. This test is for the "+ Choose" button
2.1. Go to cgi-bin/koha/admin/marc_subfields_structure.pl?op=add_form&tagfield=856&frameworkcode=#subufield
2.2. Under "Other options (choose one), for "Plugin", select "upload.pl"
2.3. Find a biblio and click Edit Record
2.4. Go to 856$u and click "Upload"
2.5. Repeat steps 1.1. - 1.10., but this time for the "+ Choose" button
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When a new framework is created and "Marc structure" is opened, a SQL
error happened if sql_strict_mode is on.
Test plan:
Create a 2 new biblio frameworks
Click "Marc structure" for one of them
=> You see the list of all frameworks with an existing structure
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When using the patron merge feature it's possible to generate a patron
with several non-repeatable attributes.
This patch prevents that.
Test plan:
Create 2 patron attribute types, one repeatable and one non-repeatable
Create 2 patrons and add them repeatable attributes
Add a non-repeatable attribute to one of them
Merge the 2 patrons
=> It succeeds, the resulting patron has all the repeatable attribute
and the non-repeatable one.
Do it again but this time add non-repeatable to both patrons
Merge them
=> It fails, you should see an error on the UI
Merge failed! The following error was reported: Tried to add more than one non-repeatable attributes. type=TYPE value=VALUE.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
There is a call to check_cookie_auth then another one to get_template_and_user
Test plan:
Use mana to create new report and new subscription.
Confirm that you need the necessary permissions to use it
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This changes the English of Ukranian to Ukrainian.
1) Apply patch
2) Go to http://localhost:8080/cgi-bin/koha/opac-search.pl
3) Click on "Language" drop-down
4) Note near the bottom it says "Ukrainian" instead of "Ukranian"
Signed-off-by: Henry Bolshaw <bolshawh@parliament.uk>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
I think it's good to fix the original problem as well
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
-Look at the AUTO_RENEWALS notice and see the syntax [% checkout.date_due as_due_date => 1 %]
-Apply patch, updatedatabase
-Look at the AUTO_RENEWALS notice and see the syntax [% checkout.date_due | $KohaDates as_due_date => 1%]
Additional test:
1 - Checkout an item to a patron
2 - Find their borrowernumber, the itemnumber, and the biblionumber
3 - Use the get_prepared_letter script to test the letter content
perl misc/devel/get_prepared_letter.pl --module circulation --letter-code AUTO_RENEWALS --tables="{\"borrowers\": 5,\"issues\": 1040,\"items\": 1040,\"biblio\": 2 }"
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We added an upload of the source page and of the screenshot but both services are discontinued.
If we need them back we must host them ourselves.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Same as the previous patch for the "Accounting" tab of the circulation
module.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If the logged in librarian does not have the updatecharges >
remaining_permissions subpermission, we should hide the 2 "Make payment"
and "Pay all fines" button from the patron detail/circ page.
Test plan:
1 - Grant an account circulation/staffaccess permissions and any subpermissions in updatechagres but NOT 'remaining_permissions'
2 - Add some charges to a patron account
3 - Sign in with the account created in #1
4 - Bring up the patron you added charges to
=> The two buttons are not displayed
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch restores the behaviour ->pay always acting as though
`AccountAutoReconcile` was enabled.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch fixes the tests for when a negative amount is passed to the
pay method. Prior to now, a negative amount would have been passed
through and recorded. This was inconsistent with all other accounts
methods and has been deprecated to ensure consistent amounts handling.
This patch also introduces basic validation to prevent negatives being
entered into the UI.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When placing hold, the pickup libraries are not sorted by name but by code.
You can see in other places : pickup_locations() calls
Koha::Libraries->search with { order_by => ['branchname'] }
Test plan :
1) Go to staff interface
2) Create a new libary with code 'AAA' and name 'ZZZ'.
2) Select a record
3) Begin placing hold
4) Look at list in "Pickup at:"
=> Without patch library 'ZZZ' is first
=> With patch library 'ZZZ' is last
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Run prove t/db_dependent/Koha/Biblio.t
Note that sort must be case insensitive.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
There is code in request.tt:
homebranch: "[% ... %]",
holdallowed: [% ... %]
There only digits where expected earlier in holdallowed
but now it can be string value ('from_any_library' for example),
so it should be in quotes.
To reproduce the problem:
1. Add circulation rules which allow 1 hold only to the itemtype
2. Make sure AllowHoldPolicyOverride syspref enabled
3. Make 1 hold to patron for any biblio which has a few items available,
for example on "reset_all dev db set":
/cgi-bin/koha/reserve/request.pl?biblionumber=4&findborrower=1
(this biblio record has 4 items)
4. Start another hold for same patron on any biblio record or the same,
and keep browser's JS console open,
for example on "reset_all dev db set":
/cgi-bin/koha/reserve/request.pl?biblionumber=4&findborrower=1
5. You should see now JS error in browser console:
Uncaught ReferenceError: from_any_library is not defined
Uncaught ReferenceError: columns_settings_borrowers_table is not defined
6. Apply the patch
7. Repeat the steps 4-5 (reload the page) and now the JS error should be gone
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The 'print' class triggers JS to create the transfer and update a form
When a transfer exists we have no form and use 'openWin' to trigger the
print
Also, I remove a stray '1' in the template
To test:
1 - Set AutomaticItemReturn to "Don't"
2 - Check in an item from another branch
3 - Confirm the transfer
4 - Check it in again
5 - Click 'Print slip'
6 - Note error in console:
Uncaught TypeError: this.form is null
7 - apply patch
8 - Repeat
9 - No error!
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The job reports errors when deleting items.
The issue seems to be that Koha::Object->delete claims in the POD to
return -1, 0, or 1 as a result, but it in fact returns the Object
itself on a successful deletion
The errors are reported as:
ERROR DELETING ITEM 501740: Koha::Item=HASH(0x55ce407a1a78)
To recreate:
1 - Find or create a record with some items
2 - Ensure those items can be deleted (not on loan, etc.)
3 - Edit the record leader and set position 5 to 'd'
4 - perl misc/cronjobs/delete_records_via_leader.pl -i -v --confirm
5 - Deletion succeeds, but reports failure on items
6 - Apply patch
7 - Find or create a new record as above, but this time add an
additional item and check it out to a patron
8 - perl misc/cronjobs/delete_records_via_leader.pl -i -v
9 - Test mode should report 1 item to be deleted, one with error
10 - perl misc/cronjobs/delete_records_via_leader.pl -i -v --confirm
11 - One item should be deleted, one item not, record not deleted
12 - check the item in
13 - perl misc/cronjobs/delete_records_via_leader.pl -i -v --confirm
14 - Successful deletion with no error reported
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This simply adds a JOIN to the collections table - if the collection is gone
then the item is not considered to be in a rotating collection
Also remove variable to store the return that is not used later
To test:
Create a rotating collection
Add an item
Delete the rotating collection
View the db (SELECT * FROM collections_tracking;)
The item is still in the collection
Enable AutomaticItemReturn
Checkin the item at a branch not its home
The item does not get transferred home
Apply patch
Restart all the things
Check in the item, it is transferred home
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
