t::lib::Mocks::Context tried to deal with preferences but did not manage
to.
This patch removes this module and add 2 routines in t::lib::Mocks in
order to mock C4::context->preference and C4::Context->config.
To test:
===START t/test.pl===
use Modern::Perl;
use t::lib::Mocks;
use C4::Context;
say "initial value for version: " . C4::Context->preference('Version');
say "initial value for language: " . C4::Context->preference('language');
t::lib::Mocks::mock_preference('Version', "new version for testing");
say "version is mocked with: " . C4::Context->preference('Version');
say "language is not yet mocked: " . C4::Context->preference('language');
t::lib::Mocks::mock_preference('language', 'new langage for testing');
t::lib::Mocks::mock_preference('Version', 'another version for testing');
say "version is mocked with another value: " . C4::Context->preference('Version');
say "language is finally mocked: " . C4::Context->preference('language');
===END===
Try to execute this file and check that the output is consistent.
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch gets rid of finish() and replace prepare_cached by prepare.
From the man page
finish()
Indicate that no more data will be fetched from this statement handle
before it is either executed again or destroyed.
You almost certainly do not need to call this method.
Adding calls to "finish" after loop that fetches all rows is a common
mistake, don't do it, it can mask genuine problems like uncaught fetch errors.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch slightly modifies the styles of the previous/next links in a
way that I think is simpler and clearer.
To test, apply the patch and clear your browser cache if necessary.
Perform a search in the staff client, click any result, and look at the
prevous/next links.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Although previous/next browsing was added for searches in the OPAC
in 2011, the staff client has been without any sort of search browsing.
Until now. This patch is an all-singing, all-dancing, all-compatible
implementation of search browsing that will work across multiple
browser tabs and on any browser since IE7 (though the staff client
layout is broken on IE7).
To test:
1) Perform a search that will bring up multiple results.
2) View one of the results.
3) Use the Previous and Next links to browse along the search results.
4) Use the "Return to results" button to check that you end up at the
correct page of results, even if you page through more than 20
records.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
It should be possible when viewing the contents of a list to click a
link to remove an individual title from the list without having to check
a checkbox and click another button.
This patch adds a link to each list item to "Remove from this list."
The functionality is JavaScript-dependent, automatically checking the
appropriate checkbox and submitting the form to delete.
To test, view a list for which you have delete permission. There should
be a "Remove from this list" link next to each item on the list. Test
delete functionality by:
- Clicking the link and then clicking cancel.
- Clicking the link and confirming.
- Checking more than one checkbox and then clicking a single remove
link (only the one corresponding record should be removed).
- Checking one or more checkboxes and clicking the "Remove from list"
link at the top of the page.
If JavaScript is disabled the links should not appear.
There are now two delete confirmation messages: One if you're removing
only one item, another if you're removing more than one. This is true
whether you use the links or the checkboxes.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This follow-up patch makes the subtitle part of the same
hyperlink as the title, maintaining consistency with other
pages in the staff interface such as list contents.
To test:
[1] Make sure that the Keyword to MARC mapping includes
mappings to 'subtitle'.
[2] Find a biblio that has both title and subtitle. Check
it out to one patron and place it on hold for another.
[3] In the checkout and patron details pages, verify that
the entry for this bib in the list of checked out titles
or hold requests includes both title and subtitle in
the same hyperlink.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds subtitles (from Keyword to MARC mapping) to the
following tables on the checkout page:
- Checkouts
- Previous checkouts
- Relative's checkouts
- Relative's previous checkouts
- Holds
Additionally it suppresses the appearence of the superfluous word "by"
in cases where the biblio has no author.
Test scenario:
--------------
1)
Make sure that you have one or more fields mapped to subtitle in:
Home . Administration . Keyword to MARC mapping
(e.g. 245 b)
2)
Test the checkout page with patrons having
- current checkouts (today)
- previous checkouts
- relatives (e.g. kids) with current /previous checkouts
- holds on items
- holds on biblios
...with items having:
- title, subtitle, author
- title, no subtitle, author
- title, subtitle, no author
- title, no subtitle, no author
3)
Do the same on patron's detail page
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
All tests pass
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- fix a typo
- rename the help file for the course reserves home
page so that it gets picked up when the user clicks
the help link there.
To test:
[1] Go to the course reserves home page, then click on the
"Help" link. Verify that a help page with contents is
displayed.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds the missing help files for course reserves.
To test:
* visit every page related to course reserves in the staff client
* click help in the top right
* review the help file for typos/content/links
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In t/db_dependent/Koha.t, the test "Got a quote based on today's
date" is failing :
$prove t/db_dependent/Koha.t :
t/db_dependent/Koha.t .. 1/6
# Failed test 'Got a quote based on today's date.'
# at t/db_dependent/Koha.t line 126.
# Compared $data->{"source"}
# got : 'Herbert Hoover'
# expect : 'Abraham Lincoln'
# Be sure to run this test on a clean install of sample data.
# Looks like you failed 1 test of 4.
Looks like the wrong quote is returned by GetDailyQuote().
I'm using a databased created with the English sample SQL datas.
I think I found the cause :
The test "Got a random quote." calls GetDailyQuote('random'=>1) which
changes the quote timestamp to now. When then testing GetDailyQuote(),
this quote (which may not be the one created by test) is the most
recent quote.
This patch moves the "Got a random quote." test after "Got a quote
based on today's date" to solve the problem.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The serials collection page displays branchcode instead of library name.
This patch uses the Branches template plugin to display the library name
instead.
Also corrected: Added missing datatables config include to prevent a
JavaScript error.
To test, view the serials collection page for a subsciption with
existing issues. Library names should be displayed instead of
branchcodes. There should be no JavaScript errors reported by the
browser.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works well and uses the new TT plugin for displaying the branch name.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The tests are wrapped in a database transaction.
To test:
prove t/db_dependent/ClassSource.t
t/db_dependent/ClassSource.t .. 1/24 prepare_cached(SELECT * FROM `class_sort_rules` WHERE `class_sort_rule` = ?) statement handle DBI::st=HASH(0x92dbedc) still Active at C4/ClassSource.pm line 249
prepare_cached(SELECT * FROM `class_sources` WHERE cn_source = ?) statement handle DBI::st=HASH(0x926876c) still Active at C4/ClassSource.pm line 137
attempting to use non-existent class sorting routine routine1
prepare_cached(SELECT * FROM `class_sort_rules` WHERE `class_sort_rule` = ?) statement handle DBI::st=HASH(0x92dbedc) still Active at C4/ClassSource.pm line 249
prepare_cached(SELECT * FROM `class_sources` WHERE cn_source = ?) statement handle DBI::st=HASH(0x926876c) still Active at C4/ClassSource.pm line 137
t/db_dependent/ClassSource.t .. ok
All tests successful.
Files=1, Tests=24, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.12 cusr 0.01 csys = 0.15 CPU)
Result: PASS
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When adding orders from staged file, you can create one order per
record using item form in the bottom of addorderiso2709.pl. The
form was missing checks of mandatory item fields; this patch
adds those checks.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All 3 patches pass tests and QA script.
Some additional notes on the test plan from the first patch:
It took me a while to figure out a combination of subfields
that would trigger the bug. I am not sure about the condition
that transforms the input field into a textbox as it does
not seem to happen for every field.
What worked in the end was (MARC21):
- $g cost, normal purchase price = mandatory
- $h serial enumeration/chronolgy = optional, filled with
text over 100 characters
Checked for:
- Adding items in cataloguing
Was able to reproduce the problem, mandatory check works
as expected.
- Adding items from staged file in acq
Was not able to trigger the problem, because we don't edit
the item here, but mandatory check works as expected.
- Addings items for serial subscriptions
Was not able to trigger the problem, because we don't edit
the items here, but mandatory check works better as before
as missing mandatory fields are now highlighted and weren't
before.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Use of CheckMandatorySubfields from cataloging.js
everywhere an item cataloging form is checked for
mandatory fields.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Under certain circumstances, when editing an item, you get a popup
warning
"1 mandatory fields empty (highlighted)".
Even though all mandatory fields are filled in.
This occurs when there is a field with a huge content (more than 100
characters) that gets displayed in a textarea instead of input.
This patch corrects the Javascript form check by using siblings().
Also adds a more precise filter to find mandatory inputs because
looking in full page may bring unwanted results.
Test plan :
- In a framework, make sure you have in item field :
An optional subfield (without authorised value),
then a mandatory subfield, then an optional subfield
next to mandatory subfield
For example : $i (optional), $r (mandatory) and $s (optional)
- Open a biblio record and create a new item
- Enter more than 100 characters in $i, fill $r and $s
- Click "Add item"
- Edit this item
=> You get a textarea for $i
- Empty $s and Save
=> Without patch, you get a warning and form is not saved and you see that $s is yellow while it should be $r
=> With patch, form is saved
- Re-edit this item
- Empty $r and save
=> You get a warning and form is not saved
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Notes on last patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The actual tests in this script are not dependent on the database,
but simply loading C4::Auth requires a valid(ish) koha-conf.xml
and database.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Add validation of the value of the KohaOpacRecentSearches. In
particular, this patch avoids the generation of an internal server
error when the OPAC is presented with an old cookie that uses the
old Storable-based serialization.
This patch also moves parsing of the cookie value into a
new routine in C4::Auth, ParseSearchHistoryCookie, and adds
a test case.
To test (in conjunction with the previous patch):
Exercise the OPAC search history functionality, after
turning on the EnableOpacSearchHistory syspref:
- As an anonymous user, conduct a variety of searches,
including ones that include non-ASCII characters
- Check the search history and verify that all searches
are listed
- Apply this patch and the previous one.
- Do *not* clear the KohaOpacRecentSearches cookie
- Check the search history and verify that no searches
are listed any more
- As an anonymous user, conduct a variety of searches,
including ones that include non-ASCII characters
- Check the search history and verify that all searches
are listed
- Log into the OPAC
- Verify that current and past searches are listed in
search history.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test:
Exercise the OPAC search history functionality, after
turning on the EnableOpacSearchHistory syspref:
- Clear the KohaOpacRecentSearches cookie
- As an anonymous user, conduct a variety of searches,
including ones that include non-ASCII characters
- Check the search history and verified that all searches
are listed
- Log into the OPAC
- Verify that current and past searches are listed in
search history.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test
1/ logout
2/ search "bar" (added to the history)
3/ search "féé" => history is empty
Apply patch
1/ logout
2/ search "bar" (added to the history)
3/ search "féé" => added to the history
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When the Quote of the Day tool selects a new new quote, it updates the
timestamp and does not take the timezone into account. Thus the time is
set to +4 hours (e.g. 2013-06-11 13:33:48 when the time is 2013-06-11
09:33:48). It then repeats the same quote every day.
To replicate:
Set Administration >> System preferences >> OPAC preferences >> Features
>> QuoteOfTheDay to Enable
In Home >> Tools >> Quote Editor, add several quotes.
In the opac, refresh the home page. You should get a quote of the day at
the top.
mysql> select * from quotes;
Note the timestamp of the quote selected by the tool. It will not match
the date on the machine (unless your server's timezone is set to UTC).
If you change the date to the previous date and refresh the opac, the
tool wlill select another quote, which will not change unless forced.
Test Plan:
1) Remove all your quotes and import a fresh set
2) Enable the quote of the day and view the opac
3) Look at your quotes table and note the timestamp is incorrect
4) Repeat steps 1 and 2
5) Look at your quotes table and note the timestamp is now correct
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
From-address and to-address were the same (patron's email) for
subscription alerts. This patch changes 'from' the branch or
kohaadminemailaddress
To test
- add a subscription in staff/serials in case you don't have any
- enable patron notifications or the subscription
- in the OPAC, subscribe to the serial
- in staff/serial, receive an issue of the serial
Before applying the patch, the email that is supposed to be sent
has the patron's email as 'from' and 'to' (and is likely to fail).
If you follow the steps after applying the patch, the email alert
should have the 'from' address of the patron's branch or
kohaadminemiladdress -- which should also work fine with the MTA/SMTP
you have set up for messaging.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch corrects the mixup for LC call number and control number.
Further, as suggested by Galen, it would be better to not introduce hardcoded
tags in the Z3950Search subs in Breeding.pm.
This patch resolves that by calling TransformMarcToKohaOneField.
Note that this only involves changes to _addrowdata and _isbn_show. These
subs are only used in building the displayed results table.
Additionally, for French UNIMARC installs publicationyear is used to fill
the Date column (copyrightdate is not used in those installs). The edition
statement is only used in unimarc_lecture_pub not in unimarc_complet.
Test plan:
Do some Z3950 searches and look for values in all result columns.
For MARC21 on LOC (and/or others):
Look for isbn 9780415964845 (check LCCN).
Look for author Rowling.
For UNIMARC on BNF2 (and/or others):
On BNF2 look for isbn 2070518426: result contains date and multiple isbn's.
Look for title: Guide des candidats aux emplois de commissaire de police.
Third result show edition statement (if you use 205$a with pub install).
Note that there are no results with LCCN here (just as before).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested for MARC21 and UNIMARC (French lecture_pub install).
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
As Jonathan correctly noted, the new Z3950 response only showed one isbn
although more isbn numbers could be in the record and would be imported.
To resolve this display problem, I traverse them all now in the updated
routine _isbn_show. There is no change in the imported records.
Note that before this patch TransformMarcToKoha did put all isbn numbers in
one field, separated by pipes (for display only). This behavior is restored
now. The three regexes on the individual isbn numbers now seem to be
overkill, but I left them there for completeness.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested this on a fresh French install under UNIMARC with BNF server.
Tested it too for MARC21.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Refactors Z3950Search.
Disable batch record counts for z3950 records.
Test plan:
Do various Z3950 searches on multiple targets from Cataloging and Acquisition.
Behavior should not have changed.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When issuing a book, some libraries want to issue by title or other details.
This patch adds a systempreference and code that allows it.
To test:
1) scan a patron card or enter a surname to start checking out;
2) enter title or other keywords;
3) the circulation screen should display a warning allowing to choose between copies.
Signed-off-by: MJ Ray <mjr@phonecoop.coop>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- fix identation in one line
- remove a commented-out warn
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
A change-and-replace went a tick too far. This patch
adjusts the column alias in the query run in MergeHolds()
to reflect that the value being returned is the number of
hold requests, not an ID.
To test:
[1] This patch should have no visible changes to behavior. To
verify, pick to bib records that have hold requests on them,
then merge them together. Verify that the merged bib
contains sll of the hold requests on it.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test:
- Place a hold request for a patron
- From the patron details page, navigate to the holds table,
then cancel (delete) it.
- Verify that the hold request is gone.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
One just needed parentheses, but the one on line 219 reflects
a slightly deeper problem -- it's running patron checks when
a patron hasn't actually been supplied.
To test:
[1] From the staff interface, bring up a biblio that has no
holds on it, then go to the holds tab.
[2] Verify that the Apache log has no new warnings containing:
request.pl: Use of uninitialized value in string eq at /home/gmc/koha/reserve/request.pl line 219
or
request.pl: Use of uninitialized value in string eq at /home/gmc/koha/reserve/request.pl line 488
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- wrap in a transaction
- create the patron records needed for the test
To test:
[1] Run prove -v t/db_dependent/Holds.t
[2] Verify that all tests have passed.
[3] Verify that the additional patron records created
by the test no longer exist in the database.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
* C4::Reserves::_FixPriority
- The previous code checked the cancellationdate. If think you never pass
in it with bad parameters, but in order to be sure I added the check on
this value.
- The reservedates array was never used.
* circ/circulation.tt
There was a bug: it was not possible to remove an hold from the
circulation page. Passing reserve_id fixes the issue.
* C4::Reserves::GetReserveId
This subroutine did not have a unit test.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch switches from using a combination of
biblionumber/borrowernumber to using reserve_id where possible.
Test Plan:
1) Apply patch
2) Run t/db_dependent/Holds.t
Signed-off-by: Maxime Pelletier <maxime.pelletier@libeo.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Koha's MARC framework structure doesn't assign tags to tabs in
the cataloging editor; only subfields are assigned to tabs, and
the field as a whole follows the subfields.
Consequently, for the purpoase of calculating a merge hash, a field
should be added either if no MARC framework information is passed
(which signals that the caller wants to deal with the entire MARC
record) or if any of its subfields are assigned to visible tabs.
This patch has the effect of getting rid of the following spurious
warnings from the Apache log:
merge.pl: Argument "" isn't numeric in numeric ge (>=) at /home/gmc/koha/Koha/Util/MARC.pm line 78
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Fix the following test failure:
* koha-tmpl/intranet-tmpl/prog/en/includes/merge-record.inc FAIL
forbidden patterns OK
tt_valid FAIL
lines 10, 24
valid_template OK
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Found a pre-existing problem with non-repeating subfields
that I noted on the bug report.
All other tests were ok and merging records worked nicely.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This follow-up moves all the MARC-specific functionality of Koha::Record
(now renamed to Koha::MetadataRecord) to a Koha::Util::MARC utility class.
To test, run relevant unit tests:
> prove t/Koha_MetadataRecord.t t/Koha_Util_MARC.t t/db_dependent/Koha_Authority.t
and optionally try to merge a record.
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch refactors the merge record interface and code a little bit
in preparation for making it possible to merge authority records.
To test:
1) Apply patch.
2) Try merging two records:
a) Create a list.
b) Add two records you would like to (or be willing to) merge
to said list.
c) View said list.
d) Check the checkboxes next to the two records you added.
e) Click "Merge selected records."
f) Choose a merge reference.
g) Choose fields from each record that you want to keep.
h) Click "Merge."
3) Confirm that your merged record has the fields and subfields you
wanted.
4) Run the unit tests for the two files that were changed:
prove t/Koha_Record.t t/db_dependent/Koha_Authority.t
5) Sign off.
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
C4::Booksellers::GetBooksellersWithLateOrders has an unused parameter.
The $branch variable is never used in the routine.
Test plan:
Check that no behavior changes on the late orders page.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I couldn't find any use of the branch parameter apart from
the one corrected by this patch. Also tested late orders,
couldn't find any problems.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Fix capitalization on submit buttons when deleting
a Z39.50 server.
- Delete this Server
- Do Not Delete
I think the "Do not delete" should maybe even be a cancel
link to be more consistent with how Koha displays this
kind of dialog in other places.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
fixes capitalisation, tool stil works
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The template for adding/editing Z39.50 servers shows the same title,
breadcrumbs, etc. for add and edit operations. This patch creates
separate text for each case.
To test, try both adding and editing a Z39.50 server. The page title,
breadcrumb, and heading should correctly reflect the operation you
perform.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works nicely and all strings are translatable.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When printing the Cart from Firefox the styling is off even though it
looks correct in preview. I think this may be because the preview is
including stylesheets designated for screen.
This patch removes special handling of JS and CSS assets for the Cart's
print view, letting the page handle print styling like other pages in
the OPAC.
To test, put items in your Cart in the OPAC. Open your Cart and click
the "print" link. Your printout should be correctly styled and match the
preview.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Tested both fail condition and condition with patch - display is much improved. Thanks, Owen!
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Works as advertised
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test (in librarian's interface):
1. Have some biblio records to get a list when searching.
2. Make an advanced search with 'as phrase' modifier (title -- ti,phr:
or author -- au,phr: , etc.)
3. Having the result list try to change the sort order.
4. You should get no results with a message like: "No results match your
search for 'au%2Cphr: " etc.
5. Apply the patch
6. Repeat steps 2. & 3.
7. You should get the list sorted according to your choice.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works nicely, passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
There are a couple of untranslatable strings in additem.js. This patch
moves the strings out of the script and into the include file which has
been created for this purpose.
To test, apply the patch and test the process for adding an item to an
existing or new basket (with AcqCreateItem set to "when placing an
order."
The add item form should be correctly labeled "Add item." After adding
an item, click to edit it again. The form should now be labeled "Update
item."
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works nicely and passes all tests.
Made sure strings can be translated testing with German templates.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Several system preference variables are unavailable to the OPAC login
template because they are not explicitly enabled for that page. Instead
of adding them to Auth.pm using the old method this patch uses the new
system preference check syntax using the Koha TT plugin.
The following preferences are now checked using this syntax in
masthead.inc:
OpacAddMastheadLibraryPulldown
UseCourseReserves
reviewson
OpacShowRecentComments
In order for the call in masthead.inc to the new plugin to work on all
OPAC pages "[% USE Koha %]" must be added to any template which
includes it (most of them).
Also in this patch: A change to Auth.pm to enable correct display of the
LibraryName in the title of the OPAC login page.
To test, turn on the above system preferences and confirm that the
relevant links appear under the OPAC's main search bar on all pages
including the login page.
Confirm that the text specified in the LibraryName system preference is
shown as the title of the login page.
Confirm that course reserves and comments are displayed correctly on the
biblio detail page.
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
I checked both prog and ccsr - all seems well and the links are appearing and disappearing in accordance with the appropriate sysprefs.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds classes to the patron info found on the
top left of the circulation and patron related pages to
allow for easy styling of the information displayed.
To test:
* Apply patch
* View a patron detail page and view the source on the list to the
left to see the styles
* View a checkout screen and view the source on the list to the
left with patron info to see the styles
* You could also try to style things by customizing your CSS
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Template only changes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The department and term columns in the courses table started
as varchar(20), but since they refer to authorized values, need
to be varchar(80) to match authorised_values.authorised_value. This
patch increases the width of those columns.
To test:
[1] Create two DEPARTMENT authorised values, one whose code
is shorter than 20 characters and one whose code is longer
than 20 characters.
[2] Create two courses; give one course the short department and
the other the long department.
[3] Go to the courses list. Observe that the department column is
displays the department name only for the short course.
[4] Apply the patch.
[5] Edit the course with the long department and assign that long
department to it again.
[6] Go back to the courses list. Observe that both of the courses
now display their assigned department.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Verified changes are consistent for new installations
and updated installations.
Passes all tests.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
