The method of checking the logged in user for superlibrarian privileges
is obtuse ( $userenv && $userenv->{flags} % 2 != 1 ) to say the least.
The codebase is littered with these lines, with no explanation given. It
would be much better if we had one subroutine that returned a boolean
value to tell us if the logged in user is a superlibrarian or not.
Test Plan:
1) Apply this patch
2) Verify superlibrarian behavior remains unchanged
Signed-off-by: Joel Sasse <jsasse@plumcreeklibrary.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Comments on second patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch fixes a problem where a patron could receive duplicate
hold waiting notifications. For example, this could happen if a
circ operator checked in an item more than once and confirmed the
same hold each time.
To test:
[1] Set up a test patron that received hold waiting notifications.
[2] Put an item on hold for the patron, then check the item in
and confirm the hold. Verify that a hold notification is
sent (or inspect the message_queue table).
[3] Check the item in again and confirm the hold again. A duplicate
hold notification will be generated.
[4] Apply the patch.
[5] Repeat steps 2 and 3. This time, only one notification should be
generated.
[6] Verify that prove -v t/db_dependent/Reserves.t passes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Works as described.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When a z39.50 server isn't able to be searched successfully, the yellow
error box came up empty. This patch fixes the problem.
Test Plan:
1) Go to Administration/z39.50 servers
2) Create a fake z39.50 server with a made up address
3) Go to cataloging, search only that server
4) Note the empty yellow alert box
5) Apply this patch
6) Re-run the search, not the alert box has a message in it now
Signed-off-by: Nora Blake <nblake@masslibsystem.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Works according to test plan.
When one of the selected servers gives result no dialog
box is shown before and after applying the patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In C4::Items::DelItemCheck, there are two SQL queries: one to check
if item is on loan, the other if item is reserved.
Those two queries use "SELECT * FROM table", fetch the data with
"$var = $sth->fetchrow", and use "$var" as a boolean condition.
This is not correct, SQL query should be "SELECT COUNT(*) FROM table".
As a consequence, it was possible to delete an item without warning to
the operator even if it was waiting on the hold shelf or in transit to
fill a hold.
This patch corrects the SQL queries and sets my ($var) to show that
fetchrow returns an array.
Test plan :
- Set an item A onloan
- Set an item B reserved and the reserve waiting
- Go to items cataloguing : cgi-bin/koha/cataloguing/additem.pl?biblionumber=XXX
- Try to delete item A
=> You get an alert and item is not deleted
- Try to delete item B
=> You get an alert and item is not deleted
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Works, and has the added bonus of being a tiny bit faster.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes t, xt and QA script tests.
Also tried deleting via batch delete - correct warnings are displayed.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
It could be useful to index the original language of a document (i.e.
"fre" for the English translation of a French novel).
This patch renames the Bib-1 use attribute 1095 from
Code-language-original to language-original and uses it to index:
- MARC21 041$h subfield
- UNIMARC 101$c subfield
It adds "language-original" in the list of index in Search.pm.
Test plan :
A. in a MARC21 GRS1 environment
1. Copy Zebra config files (zebradb/biblios/etc/bib1.att,
zebradb/ccl.properties, marc_defs/marc21/biblios/record.abs) from
your source etc/ directory to your main koha etc/ directory
2. Reindex zebra
3. Make some searches, like "language-original:fre"
B. in a MARC21 DOM environment
4. Copy Zebra config files (zebradb/biblios/etc/bib1.att, zebradb/ccl.properties,
marc_defs/marc21/biblios/biblio-zebra-indexdefs.xsl) from your source etc/
directory to your main koha etc/ directory
5. Reindex zebra
6. Make some searches, like "language-original:fre"
C. in a UNIMARC GRS1 environment
7. Copy Zebra config files (zebradb/biblios/etc/bib1.att,
zebradb/ccl.properties, marc_defs/unimarc/biblios/record.abs) from
your source etc/ directory to your main koha etc/ directory
8. Reindex zebra
9. Make some searches, like "language-original:fre"
A. in a UNIMARC DOM environment
10. Copy Zebra config files (zebradb/biblios/etc/bib1.att,
zebradb/ccl.properties, marc_defs/unimarc/biblios/biblio-zebra-indexdefs.xsl)
from your source etc/ directory to your main koha etc/ directory
11. Reindex zebra
12. Make some searches, like "language-original:fre"
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When item is transfered from items table to deleted items, all fields
must be copies but "timestamp".
This value must be updated to know when the item was deleted.
Test plan:
- Look a an item timestamp :
mysql> select timestamp from items where itemnumber = 2690;
+---------------------+
| timestamp |
+---------------------+
| 2011-09-09 15:30:21 |
+---------------------+
1 row in set (0.00 sec)
- Delete this item in cataloguing module
- Check it is not in items table anymore :
mysql> select timestamp from items where itemnumber = 2690;
Empty set (0.00 sec)
- Look in deleteditems table :
mysql> select timestamp from deleteditems where itemnumber = 2690;
+---------------------+
| timestamp |
+---------------------+
| 2013-12-05 15:33:20 |
+---------------------+
1 row in set (0.00 sec)
=> timestamp as been set to actual date/time
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Patch set passes koha-qa.pl, works as advertised!
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This is supplementary to the main patch for
bug 6331. Having removed the attribute marc from
items DelItem, we should not try to populate it.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
'ctId' as a column name conflicts with one of the system
columns that PostgreSQL uses for each table, and consequently
needs to be renamed to enable deploying the schema to a Pg
database. This patch makes this change.
To test:
[1] Apply the patch and run the SQL specified in the database
updated.
[2] Verify that the collections_tracking table no longer has
a ctId column, but now has collections_tracking_id.
[3] Verify that prove -v t/db_dependent/RotatingCollections.t
passes.
[4] Verify that installer/data/mysql/kohastructure.sql runs
cleanly in an empty database.
This patch does not affect user-visible behavior given the fact
that the rotating collections feature is currently disabled.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
It is not necessary to process the case where the number of quotes
is just one, as int(rand(1)) will always produce 0, which is a valid
offset.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If there is a gap in the id sequence for the quotes table, it
is possible that no new quote will be selected. This will happen
particularly when a lot of the older quotes with low ids have been
deleted.
This patch improves the selection of a new quote.
To test:
- Load sample quotes
- Delete the first half of the quotes.
Note: With 34 quotes, delete the quotes with ids from 1-17
- Activate the QuoteOfTheDay system preference
- Check if a quote is displayed in OPAC
- Reload the page a few times, no quote should be displayed
Note: make sure you don't have a quote with the current
date in your quotes table before running those tests
- Run 'perl t/db_dependent/Koha.t'
Note: requires sample quotes!
- Apply patch
- Reload the OPAC start page
- Verify a quote was now picked
- Run 'perl t/db/dependent/Koha.t' again - all tests should still pass
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Patch modified to use "LIMIT 1 OFFSET ?" rather than "LIMIT ?, 1"; the
latter construction does not work in PostgreSQL.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Add date fields to track when an item was marked as lost or withdrawn.
Display those fields on catalogue/moredetail.pl
Test Plan:
1) Apply patch
2) Run updatedatabase.pl
3) Pick a record with items, browse to the 'items' tab ( moredetail.pl )
4) Mark an item as lost, verify the field "Lost on:" displays below
the "Lost status" field with todays date.
5) Mark the item as not lost, verify the field no longer displays
6) Repeat steps 4 and 5 with the Withdrawn field.
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Under certain circumstance, a search term without quotation marks
returns the expected results while the same search with a
double quote embedded in it would fail.
Koha should ignore the quotation marks and return results anyway.
This appears when QueryWeightFields syspref is activated (and
QueryAutoTruncate is off), as field weighting builds a complex CCL
query using double quotes around search words. This patch simply
replaces double quotes in search words by a space.
Test plan :
- Set QueryAutoTruncate off (you may also need to set QueryFuzzy to off)
- Set QueryWeightFields off
- Perform a serch on two words where you have results, like : centre "ville
=> you get results
- Set QueryWeightFields on
- Perform same serch
=> you get the same results
Signed-off-by: Leila <koha.aixmarseille@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds 3 filters for the serials search:
- location
- callnumber
- expiration date
To test:
- Search serials by location and/or callnumber and/or expiration date
and check that results are consistent.
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch repairs a regression introduced by the main
patch where it became impossible to search for cancelled
orders from the advanced order search form.
This patch also tweaks the wording on the order status
drop-down on the order search form to clarify that the
default status filter is orders that have any status
except cancelled.
To test:
[1] Before applying this patch, perform an advanced
order search (acqui/histsearch.pl) for orders
with status cancelled. Observe that no hits are returned.
[2] Apply the patch and run the search again. This time,
the cancelled orders should be returned.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a new tab "Acquitition details" on the catalogue detail
page. It provides a list of order made for this biblio.
New system preference:
AcquisitionDetails: Hide/Show the new tab. The default for
new and upgraded installations is to display the new tab.
Test plan:
1/ Apply the patch.
2/ Select the "placing an order" value for the AcqCreateItem pref.
3/ Create a new order with X items.
4/ Go on the catalogue detail page for the selected biblio.
5/ Click on the "Acquisition details" tab and check that your order is
displayed. Itemnumbers are present in the last column. Check that links
are not broken.
6/ Close your basket.
7/ Status become "Ordered"
8/ Receive X-1 items.
9/ Come back on the catalogue detail page. There are 2 orders: 1
complete and 1 partial. The complete one has a receive date.
10/ Receive the last item.
11/ Now you have 2 orders with a complete status.
12/ Cancel the last receipt.
13/ You have 1 ordered and 1 complete (2 items).
14/ Cancel the first receipt.
15/ You have 1 ordered (3 items).
16/ Delete your order
17/ You have 1 deleted order.
18/ Switch the AcqCreateItem pref to "receiving an order"
19/ Do again steps 3 to 17.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This dependency is used in load testing (misc/load_testing/*)
Test plan:
Check if you see the dependency listed on About/Perl modules.
Verify if the version information is correct.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The subroutine _filter_fields is not used by the module
and the sub _columns is only used by it
This patch removes the dead code.
To test:
[1] Verify that the following tests pass
t/Budgets.t
t/Budgets/CanUserModifyBudget.t
t/Budgets/CanUserUseBudget.t
t/db_dependent/Acquisition.t
t/db_dependent/Acquisition/GetOrdersByBiblionumber.t
t/db_dependent/Acquisition/Invoices.t
t/db_dependent/Acquisition/OrderFromSubscription.t
t/db_dependent/Acquisition/TransferOrder.t
t/db_dependent/Acquisition/close_reopen_basket.t
t/db_dependent/Bookseller.t
t/db_dependent/Budgets.t
t/db_dependent/Serials.t
t/db_dependent/Serials_2.t
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Looks good to me.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Intermittently problems in the calling environment
cause a C4::Biblio routine to be called with an undefined
MARC::Record object. This results in the process
dying and returning to the end user a low level
message such as 'cannot call method x on an undefined
object'.
For exported subroutines taking a MARC::Record object,
check that object is defined otherwise return a logical
return value and log a stack trace to the error log.
A couple of cases were checking but dying, this may have
unwelcome results in a persistent environment so croak has
been downgraded to carp
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Adds lots of checks for $record in various places, should
not affect behaviour.
Passed all tests and QA script, including new unit tests.
Tested adding and saving a new record.
Also tested detail and result pages without XSLT.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Mandatory item fields are not indicated the same way in all places. This
patch corrects two places where required fields were shown in bold
rather than using the standard "required" class: When adding an order
from a staged file and when adding an item for a new issue of a serial.
This patch also normalizes the text input size on item entry forms: In
some places it was 50, others 67. I have changed the latter to 50.
Unrelated changes: Added $KohaDates formatting of date and time and
corrected capitalization on a heading on the add order from staged file
page.
It would be nice to be able to use the same method for displaying the
item form as we use on neworderentry.tt -- pulling in the form from a
separate include. However that system is designed for handling multiple
items and would need to be adapted for these cases.
To test, you must have a staged file from which to add an order. Open an
existing basket or create a new one and choose to add an order "From a
staged file." Choose a staged file from which to order. The item entry
form under the "Import all" heading should show required fields in red.
To test in serials: Begin the process for receiving an item from an
existing subscription. On the serials-edit page, find the "Click to add
item" links and click to open the item edit forms. There should be one
under the numbered issue and the supplemental issue forms. In both cases
the item edit screen should show the mandatory item fields in red.
Confirm that the cataloging add item form looks correct and works
correctly.
Revision: Left out the "required" note which should appear after each
required field.
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The clear js function parses input text, but input filled to a plugin
does not contain the type attribute.
Test plan:
- fill the barcode field to the barcode plugin
- go on the new order page
- verify the barcode plugin works as before
- verify the clear link clears the barcode field and all others fields.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as expected, passes all tests and QA script.
Template change only.
Barcode and date acquired are now also cleared with the
'clear' link.
But: it only works when you enter a barcode manually currently,
because the AutoBarcode functionality is broken on master (bug 11273).
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If you select an index in the search dropdown and then enter in a QP
query starting with the field, Koha will prepend the index you do not
want to use at the beginning of the search, resulting in a search that
probably does not match what you were hoping for.
To test:
1) Select an index in the search dropdown in the OPAC. Author is fine.
2) Enter a search term using manually entered indexes. For example:
ti:cat in the hat
3) Note that the search fails.
4) Apply patch.
5) Repeat steps 1 and 2.
6) Note that the search succeeds.
7) Sign off.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch removes C4::ILSDI::Utility on the basis
that one of its routines (BorrowerExists) was not used
and that the other routine can be (and is) moved to
C4/ILSDI/Services.pm.
Test:
This should be a noop. Regression testing required:
/cgi-bin/koha/ilsdi.pl functioanality, in particuler:
GetAvailability - ?service=Describe&verb=GetAvailability
AuthenticatePatron - ?service=Describe&verb=AuthenticatePatron
ILS-DI syspref must be turned on
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The descriptions for fines are stored in English in the DB
(accountlines.description). So they are not translatable.
This patch removes the descriptions automatically added and generates
the string in the template.
Test plan:
1/ Execute the updatedatabase entry.
2/ Verify in the following pages the description is consistent:
- members/pay.pl?borrowernumber=XXXX
- members/boraccount.pl?borrowernumber=XXXX
- opac-account.pl
3/ Launch the translate script and update the po files in order to
translate the new strings.
4/ Verify the strings are translated in the interface.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Works as advertised. Corrected few typos in the commit message.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan:
Go on acqui/parcel.pl?invoiceid=XX page and verify the basket group name
is displayed into the 2nd column of the pending orders and already
received tables.
Signed-off-by: Ed Veal <ed.veal@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Changed basketgroup to basket group to match spelling on other
pages.
Works as described, passes tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This gets rid of some more warnings.
It also corrects a noisy ne condition.
$userid = $retuserid if ( $retuserid ne '');
became
$userid = $retuserid if ( $retuserid );
It also integrates Srdjan Jankovic's patch with Petter Goksoyrsen's
patch, while correcting the problems found.
This includes:
my $q_userid = $query->param('userid') // '';
along with:
my $s_userid = '';
and:
my $s_userid = $session->param('id') // '';
Indentation does not reflect actual scoping.
A missing system preference would have triggered a ubiquitous
undef compare check failure message. This makes the flooding
message more useful, so as to help correct it.
The change to accomplish this was:
my $pki_field = C4::Context->preference('AllowPKIAuth');
if (!defined($pki_field)) {
print STDERR "Error: Missing AllowPKIAuth System Preference!\n";
$pki_field = 'None';
}
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
During login at the Staff interface you get warnings in the logs
regarding an uninitialized value for the $pki_field variable.
To test:
- tail -f /path/to/your-intranet-logs
- Point your browser to your staff login page
- Login
- Three warnings are showed
- Apply the patch
- Log out
- Log in
- No new warnings, and you can still log in.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Petter Goksoyr Asen <boutrosboutrosboutros@gmail.com>
Followed test plan; it works as advertised.
Also works when I deleted AllowPKIAuth system pref.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
MARC::Record 2.0.6+ enables the warnings pragma, and as a
consequence, started logging cases where a routine in
C4::Search was calling MARC::Field->subfield() with an undef
subfield label. This patch removes the log noise.
To test:
- Run prove -v t/db_dependent/Search.t
- There will be warnings about
"Use of uninitialized value $code_wanted in string" in MARC::Field.
- Apply the patch.
- Those warnings are gone.
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Tests now pass
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Fix the supplier, shipment date, and library filters
on the invoice search. An invoice's library is
(in parallel with order search) defined as the library
of the staff member that approved the basket. Before this
patch, the code was referring to an aqorders.branchcode
column that doesn't exist.
This patch also improves the author, title, ISBN/EAN/ISSN,
publisher, and publication year filters to no longer require
exact matches; substring matches now suffice.
Finally, this patch considers biblio.copyrightdate in addition
to biblioitems.publicationyear for publication date searches, as
the MARC21 frameworks use the former column but not the latter.
This patch also fixes the current test cases for invoices
so that they pass and adds regression tests.
Test plan:
[1] Create two invoices for different vendors.
[2] Do an invoice search and filter on shipment
date. Verify that the expected invoice(s)
are returned.
[3] Do an invoice search and filter on branch
(of the staff member that approved the basket).
Verify that the expected invoice(s) are returned.
[4] Do an invoice search and filter on supplier.
Verify that the expected invoice(s) are returned.
[5] Do invoice searches on author, title, ISBN/EAN/ISSN,
publisher, and publication year and verify that the
results are as expected.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Patch passes all tests, test plan and QA script.
(Adding from Katrin notes early) I agree with
Possible improvements:
- Document the behaviour of the library search as there are
lots of branches all over acquisitions with different meaning.
- Add the shipment date to the results list table
- Change label ISBN/EAN/ISSN to not include EAN for MARC21
installations
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The default values for date fields is undef, so if a date field contains
an empty string, we should insert NULL in the DB, not 0000-00-00.
The format_date_in_iso routine should be only called if a date is
defined, is not equal to an empty string and does not match the iso
regex.
This patch fixes a bug where editing or creating a patron record
without setting the birth date results in 0000-00-00 rather than null
being set as the dateofbirth value.
Partial test plan:
1. Create a new patron. Leave dateofbirth empty.
2. Save the record.
3. Open the record for editing.
4. Save the record without making changes.
5. Koha gives no error.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Now when no date is given NULL is saved to the database.
Tested:
- Adding a patron without date of birth
- Editing the patron, entering a date of birth
- Editing the patron, deleting date of birth
All worked as expected.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When a record fails to decode during a search, Koha dies with an error.
Koha should ignore bad records and continue on ( and log the error ).
An example of a record that Zebra will happily ingest but which MARC::Record
doesn't like is one that contains a punctuation character in a tag label.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test:
- Check out at least 3 items, due dates should be today, sometime in
the past and one day after tomorrow.
- Edit the message options - activate DUE and PREDUE notices with
days in advance = 2
- Run the advance_notices.pl script with -v -c
Result: Only a PREDUE notice is generated
- Run the advance_notices.pl script with -v -c -m 2
Result: Only the PREDUE message is generated correctly.
- Run t/db_dependent/Circulation.t
- without first patch: all tests pass.
- with first patch: some tests will fail.
- Apply patch.
- Rerun script, now PREDUE and DUE notices should be
generated.
- Run t/db_dependent/Circulation.t again, all tests should pass.
Add more items with different due dates, rerun and check results.
Run t/Circulation.t to confirm all tests pass.
- Apply the patch
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Passes functional tests and automated tests.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
A "busc" param is cleared if the template name is not opac-.*detail.tt.
So if a user adds a biblio to a list, he cannot continue to browse
results.
Test plan:
- launch a search at the OPAC (opac-search.pl).
- click on a result and browse results (using previous/next links).
- a title attract your attention and you add it to a list
("Save to yours lists" link on the right).
- save the list.
- browse again results.
Signed-off-by: Joy Nelson <joy@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested according to test plan, also checked some other pages and actions
accessible from the detail page.
Passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This followup fixes some QA issues:
- replace the MySQLism SQL_CALC_FOUND_ROWS
- use Koha::DateUtils instead of C4::Dates
- replace "branch" and "location" with "library"
- fixe wrong capitalisation on "Clear all" and "Select all"
and fixes some behaviors:
- the inventory tools can be used without barcode file (fixed for the
csv export too).
- mark as not scanned a non scanned item.
- update the datelastseen 1 time per biblio (and fixes the displayed
count)
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Signed-off-by: Koha Team Amu <koha.aixmarseille@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
* when a file was uploaded and the comparison with catalogue range
requested, the comparison was wrong: the logic was wrong
* items that were not supposed to be scanned (ie: supposed to be on another shelf)
didn't had the author and title, it was hard to retrieve them on the shelved
* some useful fields were missing, like homebranch, location, status
* the CSV export contained all the item information. It should contain the same
informations as the screen
Behaviour now:
* scan a list of barcode & select a range of location
* if a barcode has been scanned and should not be (misplaced item),
the information is displayed
* if you choose "compare barcodes list to result option", the
resulting list contains all items that have been scanned and those
that were supposed to be. Any item not in both list appears with a
specific message on the last column
Signed-off-by: Leila <koha.aixmarseille@gmail.com>
Signed-off-by: Koha Team Amu <koha.aixmarseille@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 8015: Fix complains from qa tools
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Bug 8015: Get rid of the eval in ModifyRecordWithTemplate
This patch removes the use of eval in the
C4::MarcModificationTemplates::ModifyRecordWithTemplate routine.
Now this routine call the wanted modification routine with the list of
parameters.
This call is done only if the condition is respected.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Bug 8015: Get rid of eval for evaluating =~ m//
Koha::SimpleMarc::field_equals uses eval in order to check if a string
matches a pattern.
Now this eval is removed and the "regex" variable does not contain the
regex separated character (/ or |).
Regression: Before this patch, the user was able to user a modifier. Now
it is not possible.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Bug 8015: Get rid of the eval for substitution
Before this patch, the regex substitution was contain into only one
variable (e.g. my $regex = "/foo/bar/i").
Now each member of the regex is stored into a field in the
marc_modification_template_actions sql table.
In order to avoid a complex code, only modifiers i and g are take into
account.
Note: If you already add the mmta table, you have to drop it.
This patch also adds a foreign key from mmta to mmt tables.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Bug 8015: FIX ui issue
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Bug 8015: The template name is a required field
Test plan:
Try to add a template with an empty string as name.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 8015: Fix template capitalization amd other template issues
Signed-off-by: Leila <koha.aixmarseille@gmail.com>
Bug 8015: Fix error where field object is returned instead of field value for fields without subfields
Signed-off-by: Leila <koha.aixmarseille@gmail.com>
Bug 8015: Fix bad ordering on function parameters
Signed-off-by: Leila <koha.aixmarseille@gmail.com>
Bug 8015: Escape escape characters for strings
Signed-off-by: Leila <koha.aixmarseille@gmail.com>
Bug 8015: Fix bad parameter list for direct external call to update_field
Signed-off-by: Leila <koha.aixmarseille@gmail.com>
Bug 8015: Fix problem with moving existing subfield value to nonexistent field/subfield
Signed-off-by: Leila <koha.aixmarseille@gmail.com>
Bug 8015: FIX QA issues
This patch fixes some stuffs failing qa tests: POD, indentation (tabs),
perlcritic
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Leila <koha.aixmarseille@gmail.com>
Bug 8015: Catch error in the SetUTF8Flag routine
The eval avoids the interface to run endlessly if an error occurred.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Leila <koha.aixmarseille@gmail.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The MARC Modification Templates system gives Koha users
the power to make alterations to MARC records automatically
while staging MARC records for import.
This tool is useful for altering MARC records from
various venders work with your MARC framework.
The system essentially allows one to create a basic script
using actions to Copy, Move, Add, Update and Delete fields.
Each action can also have an optional condition to check
the value or existance of another field.
The Copy & Move actions also support Regular Expressions,
which can be used to automatically modify field values during the
copy/move. An example would be to strip out the '$' character
in field 020$c.
Furthermore, the value for an update can include variables
that change each time the template is used. Currently,
the system supports two variables, __BRANCHCODE__ which
is replaced with the branchcode of the library currently
using the template, and __CURRENTDATE__ which is replaced
with the current date in ISO format ( YYYY-MM-DD ).
At its simplist, it can perform functions such as:
Copy field 092$a to 952$c
At its most complex it can run actions like:
Copy field 020$c to 020$c using RegEx s/\$// if 020$c equals RegEx m/^\$/
Signed-off-by: Leila <koha.aixmarseille@gmail.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The system preference 'maxoutstanding' is defined as the maximum amount
of fees owed by the patron before Koha should block placing holds (
terrible naming on this one ).
However, although the Koha OPAC respects this preference, placing holds
via a SIP2 device will not.
Test Plan:
1) Set maxoutstanding to $10
2) Pick a patron owning more than $10 in fees
3) Attempt to place a hold for this patron from a SIP2 device
This attempt should succeed
4) Apply this patch
5) Restart your SIP2 server
6) Attempt to place a hold for this patron from a SIP2 device again
This attempt should now fail
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The routines sql_file_list and marcflavour_list in Installer.pm are not used.
There are some references to them in probably obsolete '/lib' test units.
I changed these test units for the record too.
Also: removed the not-existing marcflavour parameter of sample_data_sql_list
in its call in install.pl.
Test plan:
Run a new install.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- Add branch info to baskets
- Add a list of borrowers that are allowed to manage a basket (one list
for each basket).
- Add a new subpermission: acquisition => order_manage_all
If user is superlibrarian, or if that user has permission acquisition = 1
(GranularPermissions = OFF), or subpermission acquisition =>
order_manage_all (GranularPermissions = ON), that user is authorised to manage
all baskets.
Depending on syspref AcqViewBaskets:
'all': user can manage all baskets
'branch': user can manage baskets of their branch (the basket branch is
taken into account, not the branch of the basket's creator).
If basket branch is not defined, all users can manage this
basket.
'user': user can manage baskets she created, and baskets in their
user list
There are unit tests in t/Acquisition/CanUserManageBasket.t, which
require Test::MockModule
You can edit basket's branch and users list in basket modification page
(acqui/basket.pl)
Signed-off-by: Sonia Bouis <sonia.bouis@univ-lyon3.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 7688 broke the exporting serial claims as CSV (see bug 10854).
For C4::Serials::GetLateOrMissingIssues(), $supplierid is not
meant to be mandatory. This patch fixes that.
Test plan:
try to export a serial claim.
Without this patch, the csv is always empty.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch allows to export late orders as CSV.
Test plan:
- Go on the late orders page (acqui/lateorders.pl)
- Select one or more order and click on the button "Export as CSV".
- The generated file should contains some information on the orders
(order date, estimated delivery date, vendor name, information field,
cost, basket name (and basketid), claims count and the claimed date)
The last line of the file is the total of orders.
- You are not allow to select order from different vendor.
- The check/uncheck all links appears only if a vendor is selected.
- Check that the check/uncheck works for all pages of the table.
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: sonia <koha@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Testing comments on last patch in this series.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In the serial module, we want to hide serials from others libraries.
However, to permit central serials manage, this patch introduces a
new permission, 'superserials'. If a staff member has this permission,
that person can override the restriction.
Test plan:
- Switch on the IndependantBranches syspref
- Add the permission 'superserials' for a patron and test you can
navigate and see all serials
- Remove this permission and test you cannot manage/view subscriptions
from others libraries
Signed-off-by: Frederic Durand <frederic.durand@unilim.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The first patch does a left join on aqorders_items which returns too
much order lines.
This patch follows the Galen's suggestion: it removes the join and calls
the GetItemnumbersFromOrder routine for retrieving itemnumbers.
Bonus: the "parcelitems" variable is badly named and obfuscates the code.
I changed it for "orders".
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Adds a column to indicate holds on received items, as well as adding
a new column for fund and showing the subtotals per fund above
the total subtotal.
To test:
[1] Create an order basket containing at least one title and
ensure that an item is created for that title. Close the
basket.
[2] Place a hold on the title.
[3] Receive the order. After receiving it, but before finishing
the invoice, the table of already received orders should now
have columns for the order budget and number of holds on the
title as well as lines with the subtotal per fund.
Signed-off-by: Pierre Angot <tredok.pierre@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a more extensible and flexible debarments system to Koha. The fields
borrowers.debarred and borrowers.debarredcomment are retained for compatibility and
speed.
This system supports having debarments for multiple reasons. There are currently
three types of debarments:
OVERDUES - Generated by overdue_notices.pl if the notice should debar a patron
SUSPENSION - A punative debarment generated on checkin via an issuing rule
MANUAL - A debarment created manually by a librarian
OVERDUE debarments are cleared automatically when all overdue items have been returned,
if the new system preference AutoRemoveOverduesRestrictions is enabled. It is disabled
by default to retain current default functionality.
Whenever a borrowers debarments are modified, the system updates the borrowers debarment
fields with the highest expiration from all the borrowers debarments, and concatenates
the comments from the debarments together.
Test plan:
1) Apply patch
2) Run updatedatabase.pl
3) Verify the borrower_debarments table has been created and
populated with the pre-existing debarments
4) Run t/db_dependent/Borrower_Debarments.t
5) Manually debar a patron, with an expiration date
6) Verify the patron cannot be issued to
7) Add another manual debarment with a different expiration date
8) Verify the 'restricted' message lists the date farthest into the future
9) Add another manual debarment with no expiration date
10) Verify the borrower is now debarred indefinitely
11) Delete the indefinite debarment
12) Verify the debarment message lists an expiration date dagain
13) Enable the new system preference AutoRemoveOverduesRestrictions
14) Set an overdue notice to debar after 1 day of being overdue
15) Check out an item to a patron and backdate the due date to yesterday
16) Run overdue_notices.pl
17) Verify the OVERDUES debarment was created
18) Return the item
19) Verify the OVERDUES debarment was removed
20) Disable AutoRemoveOverduesRestrictions
21) Repeat steps 15 though 18, verify the OVERDUES debarment was *not* removed
22) Add issuing rules so that an overdue item causes a temporary debarment
23) Check out an item to a patron and backdate the due date by a year
24) Return the item
25) Verify the SUSPENSION debarment was added to the patron
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Currently, the location facet only shows if you have singlebranch
mode enabled. In other words, you can either see the library branch
or the shelving location.
This patch simply changes the location facet so that it will always
show the shelving location (if one is available), regardless of the
singlebranch system preference.
Test Plan:
BEFORE APPLYING:
0) Disable singlebranch mode if it is on
1) Do an OPAC or Staff Client search for a record that has items with
shelving locations.
2) Note that you can see the library branch facet under Libraries
but no shelving locations.
3) Enable singlebranch mode
4) Repeat your search
5) Note that you can no longer see the library branch facet under
Libraries. However, you can see the shelving location under Location
N.B. If you don't have more than one branch or the search results
are all from one branch, you might not get a library branch facet.
If this is the case, create additional branches and/or change the
branch for items in your search results so that you have multiple
branches to prompt the appearance of a library branch facet.
AFTER APPLYING
1) Do an OPAC or Staff Client search for a record that has items with
shelving locations.
2) Note that you see a facet under Location on the left sidebar,
regardless of there being a singlebranch mode or the number of branches
there are being represented in the search results.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds the ability to overlay by either itemnumber,
or barcode. Itemnumbers take precendence over barcodes, which
allows us to batch update item barcodes with an overlay.
Test Plan:
1) Create a new record with 2 items, make sure to give it a unique ISBN
2) Download the record as MARCXML
3) Edit the MARC XML
a) Delete one of the two items
b) Change the barcode in the barcode field to something unused
4) Transform the xml file into marc with xml2marc
5) Browse to 'Stage MARC records for import'
6) Upload the binary marc file
7) Choose the following options:
Record matching rule: ISBN
Action if matching record found: Ignore incoming record
Action if no match is found: Ignore incoming record
Check for embedded item record data: Yes
How to process items: Replace items if matching bib was found
8) Click 'Stage for import' button
9) Verify a matching record was found, then click 'Manage staged records' link
10) Verify the rules are still set correctly
11) Click 'Import this batch into the catalog'
12) The import should tell you:
1 record was ignored
1 item was replaced
13) View the record details and verify the item's barcode was replaced
with your updated barcode value
14) Download the record as MARCXML
15) Edit the MARC XML
a) Delete one of the two items
b) Delete the itemnumber field for the remaining item
c) Alter the item's callnumber to a new value
16) Repeat steps 4 through 12
17) View the record details and verify the item's callnumber was replace
with your updated callnumber value
Signed-off-by: Henry Bankhead <hbankhead@losgatosca.gov>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When staging biblios with items attached you previously had only two
options, add or don't add.
This patch adds a third option to replace an item record if a match is
found on itemnumber or barcode, else it adds the item.
Test Plan:
1) Stage a file of biblios with items attached.
2) Import the batch into the catalog.
3) Run the indexer so the matcher will match
4) Modify the item data for at least one bib in the file
5) Re-stage the file with the item matching option set to "Replace
items if matching bib was found"
6) Let the indexer run again
7) You should see updated item information after the overlay
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Henry Bankhead <hbankhead@losgatosca.gov>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Using the TransportCostMatrix can cause the same issue. Removing the
last ditch use of the first item causes the the subroutine to continue
with the traditional matching, which will respect the hold policies.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
For some reason MapItemsToHoldRequests will, as a last ditch effort,
grab what seems to be an arbitrary available item to fill a hold request,
even if it will violate the circulation rules for holds.
In other words, even if an item matches a "Holds policy by item type"
that says "From home library", a request to transfer that item to
another library will be added to the holds queue!
Test Plan:
1) Create a record with a an item at BranchA of item type BOOK
2) Set the holds policy such that itemtype BOOK for BranchA is set
to "From home library"
3) Place a bib-level hold request for a patron with a pickup at BranchB
4) Run build_holds_queue.pl
5) You should now see a request for that item to be transfered to
BranchB, even though the rules should not allow this.
6) Apply this patch
7) Run build_holds_queue.pl again
8) View the holds queue again, that request should no longer exist
Signed-off-by: Heather Braum <hbraum@nekls.org>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch also corrects an error in the description of
NewSubscription().
Named parameters for this function cannot come soon enough.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
A lot of tests were just a call to a funtion without any arguments,
whereas the function expect at least one argument.
These tests were kept, but all return values are now undef when a
mandatory argument is missing, so return values are consistent.
The part where subscription periodicity is changed could not work
because of ',' appended to each key in ModSubscription call. So it's
rewritten, taking into account the new API for subscription frequencies.
This script should leave your database intact because it revert any
modification made.
Also fix some warnings in C4::Serials and in C4::Items.
And fix a typo in koha-tmpl/.../subscription-numberpatterns.tt
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described. No errors
Tested, again, without trouble.
With a suscription, tests successful.
No koha-qa errors
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Serials numbering pattern and frequencies are no longer hard-coded. Now
it's possible to create, edit and delete numbering patterns (and
frequencies). This patch adds two new sql tables
(subscription_numberpatterns and subscription_frequencies)
Numbering patterns behave almost as before, there are still the same
values to configure (addX, everyX, settoX, whenmorethanX). lastvalueX
and innerloopX remain in subscription tables.
There is a new value in numbering patterns: numberingX. For each
"column" (X, Y or Z) you can tell how to format the number. Actually
numberingX can be set to:
- 'dayname' (name of the day) (0-6 or 1-7 depending on which day is the
first of the week)
- 'monthname' (name of the month) (0-11)
- 'season' (name of the season) (0-3) (0 is Spring)
These names are localized by using POSIX::setlocale and POSIX::strftime
and setting a 'locale' value to the subscription. Locale have to be
installed on the system.
Note that season names are not localized using POSIX::strftime (it can't
do this), so names are hardcoded into the code (available languages: en,
fr). This could be fixed in the future by using a Perl localization
framework.
Frequencies can be configured using 3 parameters:
- 'unit': one of 'day', 'week', 'month', 'year'
- 'issuesperunit': integer >= 1, the number of received issues per
'unit'
- 'unitsperissue': integer >= 1, the number of 'unit' between two
issues
One of 'issuesperunit' and 'unitsperissue' must be equal to 1.
Examples:
unit = 'day', issuesperunit=3, unitsperissue=1 => 3 issues per day
unit = 'week', issuesperunit=1, unitsperissue=3 => 1 issue each 3
weeks
Prediction pattern is now computed server-side and is more consistent
with what Koha will do. The publication date is displayed alongside the
serial number.
Irregularities can now be checked one by one, in the prediction pattern
table, or if frequency is 'day-based' (unit is 'day'), there is the
possibility to check all issues for a week day at once.
When an irregularity is found, there is the possibility to keep the
serial number unchanged, or to skip it. It is configured at subscription
creation or modification.
For instance, with a daily subscription you can have:
skip serial number | keep serial number
----------------------+----------------------
2012-01-01 ¦ No 1 | 2012-01-01 ¦ No 1
2012-01-03 ¦ No 3 | 2012-01-03 ¦ No 2
To lighten the subscription modification page, manual history has been
moved in its own page subscription-history.pl which is accessible on
subscription-detail.pl, tab 'Planning'.
Important note: updatedatabase.pl script takes into account existing
subscriptions and create appropriate numbering patterns for them (it
tries to create as few patterns as possible). Frequency is
mapped to the correct entry in subscription_frequencies table.
This patch includes kohastructure.sql and updatedatabase.pl changes
+ sample frequencies data and sample numberpatterns data for fresh
installs (sample data is included in updatedatabase.pl)
=== TEST PLAN: ===
Create a new subscription:
- Go to Serials module and click "New subscription" button
- On the first page, choose a biblio and click next to go to the
second page
- Pick a first issue publication date
- Choose frequency '1/day'
- Choose a subscription length of 15 issues
- Choose a subscription start date
- Choose numbering pattern 'Volume, Number'
- A table appears, fill 'Begins with' cells with '1'
- Click on 'Test prediction pattern' button
The prediction pattern is displayed at the right of the page. You can
see in it the serial number, the publication date and a checkbox to
allow you to choose which serials will not be received (irregularities).
You can see that serial number start from "Vol 1, No 1" continue to "Vol
1, No 12" and then restart with "Vol 2, No 1".
Frequency is '1/day' so you can see that publication date is incremented
by one day line after line.
- Now you can play a little with frequencies and numbering patterns,
change one of them (or both) and click again on 'Test prediction
pattern'
- For example, choose frequency '3/weeks' and click on 'Test
prediction pattern' button'.
There is a little behaviour change compared with current master.
Publication date will not be guessed within the week. Koha can't know
when you will receive issues. So the publication date stay the same
(monday of each week) for 3 consecutive issues and then jump to the next
week.
- Now choose frequency '1/3 months' and numbering pattern 'Seasonal'
- Fill 'Begins with' cells with '2012' for Year and '0' for Season
- Click on 'Test prediction pattern'
- You should have something like 'Spring 2012', 'Summer 2012', ...,
'Winter 2012', 'Spring 2013'
- Note that you can have seasons for south hemisphere by entering '2'
in 'Year/Inner counter'
- 2nd note: if you have some locales installed on your system, you can
type its name in the 'Locale' field (actually it does not work for
seasons name, only for month names and day names)
If you want to modify the numbering pattern you can still do it here:
- Click on 'Show/Hide advanced pattern' link. The advanced pattern
table is shown but all fields are readonly
- Click on 'Modify pattern' button. All readonly fields are now
editable. Note that 'Begins with' and 'Inner counter' line are
repeated here and any modifications in the small table will be
replicated in the big table, and vice versa.
- Pattern name is emptied, if you type a new name, a new pattern will
be created, and if you type the same name as an existing numbering
pattern, this one will be modified (with a confirmation message)
- There is two new lines in this table:
- Label: it's what is displayed in the smaller table headers above
- Numbering: used to format numbers in different ways. can be
'seasons', 'monthname' or 'dayname'. Month name and day name can be
localized using the 'Locale' field. Seasons can't (values for
English and french are hard-coded in Serials.pm)
- You can modify what you want in the table and click on 'Test
prediction pattern' button each time you want to see your
modifications. (Note that checkboxes for irregularities aren't displayed
in this mode, and you can't save the subscription until you have saved
or cancelled your changes).
- To cancel your modifications, just click on 'Cancel modifications'
button.
- To save them, click on 'Save as new pattern'. If the pattern name is
already existing, a confirmation box will ask you if you want to
modify the existing numbering pattern. Otherwise a new pattern will be
created and automatically selected.
Once you have finished modifying numbering pattern, you can click again
on 'Test prediction pattern' to define irregularities, and then click on
'Save subscription'.
Now you can check the serials module still works correctly:
- Check the subscription detail page to confirm that nothing is
missing. Especially the 'Frequency' and 'Number pattern' information.
- Try to receive some issues. Check that the serial number is correctly
generated and if irregularities you have defined are taken into
account (if you have defined some).
- Check that receiving is blocked once you have reached the number of
issues you have defined in subscription length (or once you have
reached the subscription end date)
In serials menu (to the left of almost each page of serials menu) you
have two new links: 'Manage frequencies' and 'Manage numbering
patterns'.
'Manage numbering patterns' lead to a page which list all numbering
patterns and allow you to create, edit or delete them. The interface is
almost the same as numbering pattern modification in subscription-add.pl
'Manage frequencies' lead to a page which list all frequencies and allow
you to create, edit or delete them.
Try to create a new frequency:
- Click on 'Manage frequencies' link in the serials menu and then click
on 'New frequency':
- Fill in the description (mandatory).
- Unit is one of 'day', 'week', 'month', year' or 'None' ('None' is for
an irregular subscription)
- If unit is different from 'None' you have to fill the two following
fields (Issues per unit, and Units per issue)
- Note that at least one of those must be equal to 1
- Issues per unit is the number of received issues by 'unit' and Units
per issue is the number of 'unit' between two issues
- Display order is used to build the drop-down list. Leave empty and it
will be set to 0 (top of the list)
- Then click on 'Save'
- Check that this new frequency appears in the frequencies table and in
the drop-down list in subscription-add.pl
Subscription history has been moved in its own page. To test if it still
works, choose a subscription with manual history enabled (or modify an
existing subscription to turn on manual history).
- On the detail page, tab 'Planning', you should have a link 'Edit history'.
- Click on it
- Modify history and click on Save
- In tab 'Summary' you should have the infos you just entered
And finally, you can check that old subscriptions (by old I mean
subscriptions that existed before the update) are correctly linked to an
existing numbering pattern and an existing frequency. Numbering patterns
should be named 'Backup pattern X' where X is a number.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Great development! Work as described. No koha-qa errors
(with all patches applied). Please QA this fast.
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Squashed commits:
-----------------
Bug 7688 follow-up: Small fixes for QA
- # Subroutines::ProhibitExplicitReturnUndef: Got 1 violation(s) in
C4::Serials::GetSubscriptionIrregularities
- Bad template constructions fixed in serials/subscription-add.tt
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
----
Bug 7688 follow-up: Small fixes for QA #2
- "return undef" -> "return"
- ":utf8" -> ":encoding(UTF-8)"
- TAB -> SPACES
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
----
Bug 7688: Translate sample frequencies for french
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
----
Bug 7688: Fix generating next serial when there is no 'Expected' issue
It can happen when the Expected issue is claimed. In this case the
status of the last serial is 'Claimed'
This patch change the API of GetNextSeq and GetSeq
Test plan:
- Create a subscription which starts a long time ago so that serials
automatically appear in late issues
- Receive the first serial
- Go to claims page and claim the 2nd serial.
- Go back to the subscription page and click on 'Serial collection'
- You should have 2 serials, one 'Arrived' and one 'Claimed'.
- Click on Generate Next. This should fail with a software error message
("can't call method output ...")
- Apply this patch and click again on Generate Next. A new issue must be
created with status 'Expected'.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
----
Bug 7688: Followup FIX perldoc
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When an index does not contain a structure part, the structure "wrdl"
is automatically added and a structure is mandatory to build search
query (to convert ':' into '=').
But the code that tests that the structure is not already defined looks
in entire index string :
$index =~ /(st-|phr|ext|wrdl|nb|ns)/
It should look for a comma followed by a structure and in the case of
"nb" and "ns" look for an exact match.
The consequence is that an index containing ns or nb or phr or etc does
not work.
This patch modifies the regexp for this part and other parts looking at
structures into index.
Test plan :
- Desactivate all searching sysprefs.
- Create a new index called "ansa" number 8999 into bib1.att,
ccl.properties and records.abs
- Index a biblio with a value on this index, ie "VALUE"
- Perform a search on this index by editing URL:
http://<server>/cgi-bin/koha/catalogue/search.pl?idx=ansa&q=VALUE
=> Without patch, the search does not work. The PQF query is
"@and ansa: VALUE"
=> With patch, the search works. The PQF query is "@attr 1=8999 VALUE";
- Perform same test with an index containing a structure ie "aphra"
- Set QueryAutoTruncate syspref to automatically
=> Check * is added to operand : PQF query is
"@attr 1=8999 @attr 4=6 @attr 5=1 VALUE"
- You may check stopwords removal but this feature is obsolete
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: as far as I can test, this works. Small tab error reported
by koha-qa, fixed in a followup.
This kind of patch is difficult to test without explicit instructions,
not everyone knows how to check what kind of PQF search is used.
I don't know. But I can test search results.
Test:
1) Deactivate search sysprefs
QueryAutoTruncate = only if * is added
QueryFuzzy = Don't try
QueryStemming = Don't try
QueryWeightFields = Disable
UseQueryParser = Do not try
2) Create new index 'ansa'
bib1.att : att 8999 ansa
ccl.properties : ansa 1=8999
records.abs : melm 999 ansa:w,ansa:p
1) and 2) from comment 3 on Bug
3) In the undestanding that index refers to field 999,
edited default framework, made 999a visible on editor
4) Edit sample record, add 'VALUE' to 999a, save, reindex
5) Search with /cgi-bin/koha/catalogue/search.pl?idx=ansa&q=VALUE
No results
6) Apply patch, repeat search
Got results
That's all I can test. If not enough for QA, then this
must wait until further and explicit test instructions
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
There is (for MARC21, at least), an exising indexes that this patch
fixes: Code-institution.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
C4::Accounts::fixcredit and C4::Accounts::refund are marked as
deprecated and are not used. They can be removed.
Use:
git grep fixcredit
git grep refund
and verify these routines are not currently in used.
Bonus: The module exports reconcileaccount which is not defined. The
export is removed too.
MLT: Ran qa tool on this patch with no issues either.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
[1] Fix regression on bug 10663
Looks like the regression was introduced by a glitch during rebasing.
[2] Fix errors in Circulation_issue.t
The change in AddRenewal() turned up an issue with how the test
script issued one of the test items.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a renewal tool that functions similar to the returns where a
librarian can continuously scan items for renewal. This script blocks
renewals that are impossible, and allow the same renewal overrides
as circulation.pl
Test plan:
1) Apply the patches for bug 8798
2) Apply this patch
3) Browse to /cgi-bin/koha/circ/renew.pl
4) Enter an invalid barcode, you should get an error message
5) Enter a valid, but not checked out barcode, you should get an error
message.
6) Enter a valid barcode that is checkout out and should be renewable,
you should get a success message.
7) Enable AllowRenewalLimitOverride
8) Enter a barcode for an item that has been renewed too many times
9) You should get a warning which you can override.
10) Disable AllowRenewalLimitOverride
11) Repeat steap 8
12) You should get a blocking error message
11) Enter a barcode for an item with unfilled holds on it,
you should get an overridable warning
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Passes all tests and QA script, some issues have been
addressed in follow-ups.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch uses understandable codes instead of magical numbers for the
aqorders.orderstatus field.
+ execute sql queries in unit tests into a transaction.
Signed-off-by: Pierre Angot <tredok.pierre@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan:
Check that deleted orders are not listed in the late orders search
results.
Signed-off-by: Cedric Vita <cedric.vita@dracenie.com>
Signed-off-by: Pierre Angot <tredok.pierre@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
You can now search orders by
- order status
- fund
The patch series also adds a new field, aqorders.orderstatus, which can
contain following values:
new
ordered
partial (for partially received orders)
complete
cancelled
To test: Search and check if results are consistent in histsearch.pl
Signed-off-by: Cedric Vita <cedric.vita@dracenie.com>
Signed-off-by: Pierre Angot <tredok.pierre@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Comments on last patch.
Note: status are no longer numeric, but strings now.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Right now there is no way to change the budget or fund when receiving an
item, which is annoying, particularly at the end of the fiscal year when
every item not already received has to be switched to the following
year's budget. This patch adds the ability to change the budget and fund
when receiving.
To test:
1) Apply patch.
2) Create an order for a vendor, choosing a fund to use for that order.
3) Receive the order, leaving the fund unchanged. Make sure the fund
did not change.
4) Create another order for a vendor, choosing a fund to use for that
order.
5) Receive the order, this time changing the fund. Make sure the fund
is changed.
6) Run the unit test:
> prove t/db_dependent/Acquisition.t
7) Sign off.
(Notes: this patch depends on the Acquisitions.t unit test improvements
in bug 10274; the seemingly-unrelated change in SQLHelper quiets an
irritating warning caused by the NewOrder call in ModReceiveOrder)
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
A routine declares two lexical variables named $stylesheet.
This patch renames the second to keep code clearer and
avoid propagating compile time warnings
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised!
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Given how easy it is to accidentally receive items from one invoice on
multiple invoices, the ability to merge invoices can be quite handy.
This patch adds that ability to Koha's Acquisitions module.
To test:
1) Apply patch.
2) Run unit test:
> prove t/db_dependent/Acquisition/Invoices.t
3) Create two invoices from the same vendor for merging, and receive at
least one order on each.
4) Do a search on the Invoices page that brings up both the invoices you
created.
5) Check the boxes next to the two invoices.
6) Click "Merge selected invoices."
7) Choose which invoice you want to keep (the default will be the first).
8) Click "Merge."
9) Confirm that the resulting invoice has all the orders you received
listed on it.
10) Sign off.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Merged several invoices sucessfully - with and without received
orders, open and closed. Works nicely.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In the C4::Acquisition module, 2 routines do the same work. This patch
merges these 2 routines.
Test plan:
test the acqui/orderreceive.pl, acqui/uncertainprice.pl
and serials/acqui-search-result.pl, acqui/parcel.pl scripts.
Note: on acqui/parcel the basket filter is a search on basket name (was
on basket id, which was not relevant).
Signed-off-by: Pierre Angot <tredok.pierre@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pm, no adverse bahaviors noted. All sub calls updated.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes the web-based self-check module pages
specify that no browser (or proxy caching) occur at all.
This prevents a security issue where letting the SCO session time out,
then hitting the back button allowed one to view the previous
patron's session.
This patch adds an optional fifth parameter to output_with_http_headers(),
and output_html_with_http_headers(), a hashref for miscellaneous
options. One key is defined at the moment: force_no_caching, which if
if present and set to a true value, sets HTTP headers to specify no
browser caching of the page at all.
To test:
[1] Start a web-based self-check session and optionally perform
some transactions.
[2] Allow the session to time out (it may be helpful to set
SelfCheckTimeout to a low value such as 10 seconds).
[3] Hit the back button. You should not see the previous patron's
self-check session.
[4] Verify that prove -v t/Output.t passes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Ed Veal <ed.veal@bywatersolutions.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
No code implements the routines Get and TransformHtmlToMarc2,
so don't export them into users' namespace
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Recent changes to LDAP broke auth_by_bind in many situations. This bug
resets the behaviour to what it used to be, however also allows the new
behaviour by adding the 'anonymous_bind' parameter to the LDAP config.
Testing:
1) Find an LDAP configuration that was broken recently that uses
auth_by_bind
2) Apply this patch
3) See if it works again.
Additionally, testing the original path in the case of 'anonymous_bind'
being set should probably be done too, but I have no idea about the LDAP
server config for that.
Signed-off-by: Ulrich Kleiber <ulrich.kleiber@bsz-bw.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan:
1) set an empty string for the ReservesMaxPickUpDelay pref
2) place a hold on an item
3) check in the item
4) click on "Print and confirm"
5) an error occurs
> The 'days' parameter (undef) to DateTime::Duration::new was an 'undef'
6) apply the patch
7) repeat steps 1 to 4
8) the error does not occur anymore.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
An empty string didn't do it for me, I had to set the
variable for the systempreference to NULL. I am not sure
if this can happen when editing from the interface, but
this change should not have any ill side effects and it has
unit tests!
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Koha::DateUtils::output_pref took 4 parameters and the last one is a
boolean, so some calls were:
output_pref($dt, undef, undef, 1)
This patch changes its prototype to
output_pref({
dt => $dt,
dateformat => $dateformat,
timeformat => $timeformat,
dateonly => $boolean
});
An alternative is to call the output_pref routine with a datetime
object, without using an hashref:
output_pref($dt);
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
These variables still need to be exported to the template by default for
the 'prog' OPAC template to work correctly.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The goal of this theme is to provide a fully-responsive OPAC which
offers a high level of functionality across multiple devices with varied
viewport sizes. Its style is based on the CCSR theme, with elements of
the Bootstrap framework providing default styling of buttons, menus,
modals, etc.
The Bootstrap grid is used everywhere, but Bootstrap's default
responsive breakpoints have been expanded to allow for better
flexibility for our needs.
All non-translation-depended files are in the root directory of this new
theme:
css, images, itemtypeimg, js, less, and lib. Languages.pm has been
modified to ignore the new directories when parsing the theme language
directories.
This theme introduces the use of LESS (http://lesscss.org/) to build
CSS. Three LESS files can be found in the "less" directory: mixins.less,
opac.less, and responsive.less. These three files are compiled into one
CSS file for production: opac.css. "Base" theme styles are found in
opac.less. A few "mixins" (http://lesscss.org/#-mixins) are found in
mixins.less. Any CSS which is conditional on specific media queries is
found in responsive.less.
At the template level some general sturctural changes have been made.
For the most part JavaScript is now at the end of each template as is
recommended for performance reasons. JavaScript formerly in
doc-head-close.inc is now in opac-bottom.inc.
In order to be able to maintain this structure and accommodate
page-specific scripts at the same time the use of BLOCK and PROCESS are
added. By default opac-bottom.inc will PROCESS a "jsinclude" block:
[% PROCESS jsinclude %]
Each page template in the theme must contain this block, even if it is
empty:
[% BLOCK jsinclude %][% END %]
Pages which require that page-specific JavaScript be inserted can add it
to the jsinclude block and it will appear correctly at the bottom of the
rendered page.
The same is true for page-specific CSS. Each page contains a cssinclude
block:
[% BLOCK cssinclude %][% END %]
...which is processed in doc-head-close.inc:
[% PROCESS cssinclude %]
Using these methods helps us maintain a strict separation of CSS links
and blocks (at the top of each page) and JavaScript (at the bottom). A
few exceptions are made for some JavaScript which must be processed
sooner: respond.js (https://github.com/scottjehl/Respond, conditionally
applied to Internet Explorer versions < 9 to allow for layout
responsiveness), the _() function required for JS translatability, and
Modernizr (http://modernizr.com/, a script which detects browser
features and allows us to conditionally load JavaScript based on
available features--or lack thereof).
Another new JavaScript dependency in this theme is enquire.js
(http://wicky.nillia.ms/enquire.js/), which lets us trigger JavaScript
events based on viewport size.
I have made an effort to re-indent the templates in a sane way,
eliminating trailing spaces and tabs. However, I have not wrapped lines
at a specific line length. In order to improve template legibility I
have also tried to insert comments indicating the origin of closing tags
like <div> or template directives like [% END %]:
</div> <!-- / .container-fluid -->
[% END # / IF ( OpacBrowseResults && busc ) %]
TESTING
Proper testing of this theme is no easy task: Every template has been
touched. Each page should work reasonable well at a variety of screen
dimensions. Pages should be tested under many conditions which are
controlled by toggling OPAC system preferences on and off. A variety of
devices, platforms, and browsers should be tested.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Enable patronimages
4) Verify patron images are still displaying correctly
5) Test deleting a patron image
6) Test adding a patron image from moremember.pl
7) Test adding a patron image from tools/picture-upload.pl
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
* Added base class files for all tables in koha using
DBIx::Class::Schema::Loader.
* Added a (very basic) test file for C4::Context
* Also added dependencies in required files.
To Test:
[1] Install patch
[2] Make sure you can still connect to Koha
[3] You may optionally run this test script:
use Koha::Database;
use Data::Dumper;
my $db = Koha::Database->new();
my $schema = $db->schema();
print Dumper($schema->resultset("Borrower"));
If you run this file you should get a DBIx dump of the borrowers table.
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In a serials module, when searching subscriptions, the results table as
a "Notes" column.
In TT code, you see that it tries to display public note
"subscription.notes" and internal note "subscription.internalnotes".
The internal note is displayed well but not the public note.
You can see the 2 notes in serial details in summary tab.
The problem commes from the SQL query. A join is perform on subscription
and biblio, both containing a "notes" column.
This patch solves the problem by using a alias in query for both columns
(biblio.notes is acutally not used in template but could be).
Test plan :
- Edit a subscription
- Add public and internal notes. For example : "too busy" and "on holiday"
- Perform a subscription search that returns this subscription
=> "Notes" column contains both notes. For example : "too busy (on holiday)"
- Test with only public note
- Test with only internal note
Works as described.
Signed-off-by:Mathieu Saby <mathieu.saby@uhb.fr>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Works as described, fixes a bug as the templates show that
the intention was to display both notes in the column.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan:
Verify that existing CSV lists list MARC CSV profiles and not SQL CSV
profiles.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch:
- adds a new column 'type' to the export_format table.
- renames the field name export_format.marcfields with
export_format.content.
Test plan:
- Check that existing profiles have the type "marc" selected by default
- Create a new profile with a type "sql"
- Save and verify the profile is correctly displayed when you select it.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described. koha-qa reports Small tabs errors,
corrected in followup
Test:
1) go to Tools > CSV profiles, Create profile, current
2) Apply patch, run updatedatabase
3) Go to Tools > CSV profiles, new option present
old profile with type MARC
4) Create new profile MARC, save and show correct
5) Create new profile SQL, save and show correct
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass with all 3 patches applied.
Works as described. Functionality for SQL profiles will be
added by another patch. For now it's possible to add/edit/delete
them.
Existing CSV profiles can still be exported correctly.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch allows to define default values in the authorities framework.
Some code already existed but the feature did not work.
Test plan:
1/ Choose a framework, field and subfields.
2/ Define a default value.
3/ Create a new authority and check that the subfield is
automatically filled with the default value.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. koha-qa reports some tabs, fixed in followup
Test
1) Apply patch, run updatedatabase.pl
2) Edit auth framework, put default value someware, save
3) Add new auth, default value present
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Verified database update is done correctly.
Controlfields 0xx
- Edited an existing field (001)
- Set a default value for subfield @
- Edited subfield again, checking default was saved correctly
- Verified the default shows up correctly when creating a
new authority using this authority type
Fields
- Edited an existing field (100)
- Set a default value for subfield e
- Edited subfield again, checking default was saved correctly
- Verified the default shows up correctly when creating a
new authority using this authority type
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In OAI set mappings, the value "is equal to" is hardcoded. This
enhancement changes it to a dropdown menu to choose between "is equal
to" and "not equal to".
To test:
* define a set
* define a mapping for said set with "is equal to"
* run /misc/migration_tools/build_oai_sets.pl -r -v
* confirm that you have correct entries in SQL: select * from
oai_sets_biblios;
* change mapping to 'not equal to', save
* run /misc/migration_tools/build_oai_sets.pl -r -v
* confirm that you have correct entries in SQL: select * from
oai_sets_biblios;
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch: Fix bug id in updatedb.pl
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adjusts the auto-completion on the authority record
finder (accessed from the bib editor) so that if you do
start typing in the "Main entry ($a only)" input field, it will
return only the $a of the main heading for matching authority
records.
This fixes a problem where typing "shakes", choosing
"Shakespeare, William, 1564-1616" from the auto-completion
result list, then hitting the search button fails to bring
up results, as the dates come from the $d of the 100 field
(in MARC21).
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Works as advertised.
Tested with an authority where I added my search term in $b.
The modified authority came up in main entry, not in mainmainentry.
That was the desired result.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To reproduce and test:
To reproduce:
1) Create an authority record with main heading (100) in Latin script
(e.g. Oppenheimer, Aharon -- subfields $a and $b) and parallel form
(700) in Hebrew (אופנהיימר, אהרן -- subfields $a and $b).
Mark it correctly in $8 with freheb (or engheb if you like);
2) Reindex and search;
3) You will see:
Oppenheimer Aharon
freheb: אופנהיימר
Whereas you would rather like to see (mind language and lack of $b above):
Oppenheimer, Aharon
Hebrew: אופנהיימר, אהרן
The patch corrects the issue and should not harm those who (improperly)
put only one triple in $8
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No koha-qa errors.
Same result on OPAC and STAFF
Turns out that test plan is wrong,
you neet to fill tag 200ab, not 100ab, for main heading.
I filled 100a with some example data from UNIMARC auth manual.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Took me a bit to figure it out, works according to test plan.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Before fixing UNIMARC DOM indexing, we must fix GRS-1 indexing
1) In advanced search, some Coded fields index are not working: Print,
Illustration, Content
2) Country-heading index is not working
3) Some subfields are indexed in wrong indexes :
102$a should be in Country-publication instead of Country-heading
(non defined in bib1.att)
106$a, filled only for printed works, should be in ff88-23 (form of
item) instead of itype. (ff88-23 is made for Marc21 008 pos
23, which contains the same data as 106a)
200$b should be in Material-type instead of (or in addition to) itype
and itemtype: (Material-type :"free-form string, ... that
describes the material type of the item, e.g., cassette, kit,
computer database, computer file.")
100$a pos 22-24 should not be indexed as "ln" : it is the language of
the record, not the language of the ressource
4) Index names are too long : if we index new positions of coded fields,
with existing names it breaks Zebra indexing (there must be a limit
in line lenghth in record.abs?)
5) There are a lot of warns when rebuiding zebra.
This patch make some changes in bib1.att (could be used later to improve
search) :
- fixing wording for att 51 and 1012
- adding comments for attributes based on MARC21 008 field (8800-8841)
- creating 8806 (tpubdate), 8838 (Modified-code), 8818 (ff8-18), 8840
(ff8-18-21), 8819 (ff8-19), 8821 (ff8-21), 8828 (ff8-28), 8830
(ff8-30), 8831 (ff8-31)
- creating attributes specific to UNIMARC : 9701-9707 (Video-mt,
Graphics-type, Graphics-support, Title-page-availability,
Cumulative-index-availability, script-Title, char-encoding)
- setting apart 3 blocks of attributes, so it could be easy to make
further changes :
-- common to Marc21 and UNIMARC : 8806, 8822, 8838
-- slightly different in Marc21 and UNIMARC (different meanings
according to the type of the record => don't match a single
UNIMARC field)
-- specific to UNIMARC : 9701-9707
In ccl.properties :
- creating a new index: Country-publication 1=1053
- suppressing some warns by mapping with bib1 att:
Date-time-last-modified, Name, rtype, Music-number
- defining indexes using the 3 blocks attributes defined in bib1
(common to Marc21 and UNIMARC, slightly different, specific to UNIMARC)
In record.abs :
- renaming some index for 100-105-110 fields
- correcting indexing of 102$a (country of publication)
106$a (ff88-23)
100$a pos 22-24 (language of record, no more
indexed)
105$a pos. 0-3 (illustration code)
200$b (for the moment, I keep it indexed in
itype and itemtype, but also Material-Type)
In C4/Search.pm :
- adding "Country-publication" index
In OPAC and staff interface template subtypes_unimarc.in :
- renaming indexes to take into account the changes made to Zebra
config files
To test (this cannot be done with a sandbox) :
1) Apply the patch in a UNIMARC GRS-1 Koha instance
2) Copy the following files from the etc/zebradb of your source
directory into the etc/zebradb of your main Koha directory:
-- etc/zebradb/biblios/etc/bib1.att
-- etc/zebradb/ccl.properties
-- etc/zebradb/marc_defs/unimarc/biblios/record.abs
3) Reindex your data (rebuild_zebra -x -b -r -v)
4) Try to use those Coded fields indexes in Advanced search, in OPAC
and Staff interface (available after clicking on "More options",
then on "Coded information filters"):
Audience, Print, Literary genre, Biography, Illustration, Content,
Video Types, Serials, Serial Type, Periodicity, Regularity
5) Try to search "Country-publication=FR" in simple search
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No koha-qa errors.
Tests for GRS-1
Followed test plan
Search by coded fields works, but only on OPAC,
on staff there are few options
Search by Country-publication works after patch
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Modified Record::marc2bibtex to varlidate fields 100, 110 and 111 in
non-UNIMARC flavours.
Test plan:
1)Search any books in the OPAC with a main entry (1XX in MARC21, 700-720 in UNIMARC)
2)Export the record in the bibtex format
==>The output won't contain the main entry.
3)Apply the patch
4)Export the record
==>The record will contain the main entry
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixes a long standing bug.
Passes all tests and QA script.
Tested with multiple records, seems to work well.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch fixes some incoherences of the routine
GetBooksellerWithOrders().
Now it considers the field $estimateddeliverydateto and it replaces it
by now() only if it is undef.
Also, it doesn't test if $aqbookseller.deliverytime is not Null anymore
but if $deliverytime = null or undef, it replaces it by 0.
It also verifies if $delay is >= 0 and return undef if it is a negative
value.
To Test:
Before, this routine sorts out the BookSellerWithLateOrders. If a
bookseller did not specify a deliverytime, it would never appears in
the list of LateOrders. Moreover, if the field "Estimated delivery
date to" was specified, it didn't take care of the value and it
returns the late order up to today's date.
Now, the returned list considers all the fields give and if the
delivery time of the bookseller is not specified, it calculates the
late orders as if the deliverytime is 0. By default, all booksellers
which have orders in late until today are listed unless "estimated
delivery date to" is specified.
prove t/db_dependent/Bookseller.t
t/db_dependent/Bookseller.t ..
[Some warnings about uninitialized values]
WARNING: GetBooksellerWithLateOrders is called with a negative value at C4/Bookseller.pm line 135.
t/db_dependent/Bookseller.t .. ok
All tests successful.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds some improvements for the routine GetOpenIssue().
Now, it verifies if the parameter is given (if not it returns undef)
and it returns $sth->fetchrow_hashref() instead of a $issue.
To test:
prove t/db_dependent/Circulation_issue.t
t/db_dependent/Circulation_issue.t .. ok
All tests successful.
Files=1, Tests=16, 2 wallclock secs ( 0.06 usr 0.01 sys + 1.09 cusr 0.07 csys = 1.23 CPU)
Result: PASS
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Same situation as the one noted in comment of
Bug 10683, test fails unless there is an issuingrule
All, All with 1 as renewals allowed.
With that condition, it succeeds
No koha-qa errors
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds return values to DeleteTransfer:
Undef if no parameters are given
1 if a Transfer is deleted
0E0 if a wrong parameter is given
It also fixes some unit tests in t/db_dependent/Circulation_transfers.t
To test:
prove t/db_dependent/Circulation_transfers.t
t/db_dependent/Circulation_transfers.t .. ok
All tests successful.
Files=1, Tests=14, 20 wallclock secs ( 0.03 usr 0.00 sys + 0.39 cusr 0.02 csys = 0.44 CPU)
Result: PASS
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Applied 10681 and 10692 before 10698
Run prove t/db_dependent/Circulation_transfers.t without errors
No koha-qa errors on all 3 patches
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch gets rid of finish().
From the man page
finish()
Indicate that no more data will be fetched from this statement handle
before it is either executed again or destroyed.
You almost certainly do not need to call this method.
Adding calls to "finish" after loop that fetches all rows is a common
mistake, don't do it, it can mask genuine problems like uncaught fetch errors.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch gets rid of finish.
From the man page
finish()
Indicate that no more data will be fetched from this statement handle
before it is either executed again or destroyed.
You almost certainly do not need to call this method.
Adding calls to "finish" after loop that fetches all rows is a common
mistake, don't do it, it can mask genuine problems like uncaught fetch errors.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Similar to other patches from the same author
I run prove t/db_dependent/Reserves.t without errors
don't know if more tests are needed.
No koha-qa errors
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch gets rid of finish.
From the man page
finish()
Indicate that no more data will be fetched from this statement handle
before it is either executed again or destroyed.
You almost certainly do not need to call this method.
Adding calls to "finish" after loop that fetches all rows is a common
mistake, don't do it, it can mask genuine problems like uncaught fetch errors.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Similar to other patches from the same author.
Run prove t/db_dependent/Accounts.t without errors
No koha-qa errors
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The move avoids a problem where many modules would gain
a dependency on C4::Auth just because C4::Members needs access
to hash_password().
This patch also adds a couple unit tests for the new password
hashing code.
To test:
[1] Verify that there are no regressions on the test plan for bug
9611.
[2] Verify that t/AuthUtils.t and t/db_dependent/Auth.t pass.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Right now overdues come from the branch, but the
others come from the admin email address - this
is a problem in multi-branch systems because they
have to come up with one email address that all
branches have access to.
C4::Letters::_send_message_by_email currently sets
the from address in the following order:
1) Address specified in message
2) Koha admin email address
The order will now be:
1) Address specified in message
2) Borrower's home library email address
3) Koha admin email address
Test Plan:
1) Set your library email addresses, and the KohaAdminEmailAddress
Make sure each of them are unqiue
2) Choose a borrower, enable the enhanced messaging and enable the
checkout and checkin email notices. Use your email address for
the borrower's email so you can recieve the emails.
3) Check out an item, check the from address of the email,
it should be the email addres set in KohaAdminEmailAddress
4) Apply the patch
5) Return the item, check the from address of the email,
it should match the email address set for the borrower's
home library.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If a lot of items has the same callnumber, the order should be on the
itemnumbers. Otherwise the left side is always filled with the same
items.
+ Fix a bad c/p for the next link (when js is disabled).
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The next and previous links should completely refresh the shelf.
For example:
[<] [1] [2] [3] [4] [5] [6] [>]
Before this patch, the next and previous links were the same as the 1
and 6.
With this patch, after clicking on next, we will get:
[<] [7] [8] [9] [10] [11] [12] [13] [>]
This patch adds a new AJAX script to get the shelf browser block.
Test plan:
- On a detail biblio page, click on a "Browse shelf" link.
- Play with the next and previous links.
- Deactivate Javascript (using NoScript for example) and check that you
get the same behavior (but the page is reloaded).
- Launch the unit tests: prove t/db_dependent/ShelfBrowser.t
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
- improve POD
- remove extraneous comments
- correct license statement in new files
- remove backticks in database update SQL
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch introduces a new Z39.50 interface for searching Z39.50
compliant databases for MARC authority records.
These databases aren't as common as their bibliographic equivalents,
but they're out there and very useful. I have included info at the
bottom of this messsage for sample authority databases you can try.
To test this patch:
1) Set up Z39.50 client targets for authority databases. (I've included
information at the bottom of this message for LibrariesAustralia's
test server for authorities as well as instructions on how to use
your Koha's z39.50 authority server as well. The Library of Congress
also has authority databases available (unsure if these are test or
prod), and you might have access to others through OCLC or RLIN. OCLC
provides login credentials for their test databases.
2) Go to the Authorities module
3) Click on the new "Z39.50 search button"
4) Select your authority search targets from the list.
5) Do a search for an authority you would like using either the "Raw"
input box or the more specific input boxes for names, subjects, subject
sub divisions, or titles. (I like searching Name (personal): Eric on
the LibrariesAustralia test DB.)
6) You should see a table listing the server, heading, authority type,
and two other columns (MARC and a nameless column). "Authority type"
is the type of authority it will become when imported in to Koha. In
the Eric example, "PERSO_NAME".
7) Click on "MARC" next to the results of interest to review the MARC
authority record.
8) When you're satisfied with a record, click on "Import".
9) The pop-up window will close and your original Koha window will
change to the "Adding authority Personal Name" screen (in the Eric
example).
10) All the relevant fields should be filled out for the record. Review
them and make any changes as necessary. (N.B. The 001 will be cleared
when saved, so if you have a use for the imported control number, move
it to the 010, 016, or 035 as appropriate. If you have a default value
for the 003, this will also likely be overwritten. Move it if necessary.
The 005 will also be updated when saved, so do not worry about that.)
11) When you're satisfied, click save.
12) Presto! You've imported your first authority record via Z39.50!
--
Here is the info for the LibrariesAustralia test Z39.50 authority
database:
Z39.50 server: LibrariesAustralia Authorities
Hostname: z3950-test.librariesaustralia.nla.gov.au
Port: 210
Database: AuthTraining
Userid: ANLEZ
Password: z39.50
Syntax: MARC21/USMARC
Encoding: utf8
-
The U.S.A. Library of Congress also provides Z39.50 access to its Name
and Subject Authorities (http://www.loc.gov/z3950/lcserver.html).
Name Authority:
Z39.50 server: Library of Congress Name Authority File
Hostname: lx2.loc.gov
Port: 210
Database: NAF
Syntax: MARC21/USMARC
Encoding: utf8
Subject Authority:
Z39.50 server: Library of Congress Subject Authority File
Hostname: lx2.loc.gov
Port: 210
Database: SAF
Syntax: MARC21/USMARC
Encoding: utf8
(N.B. Both of these databases also include title authorities.)
-
For testing purposes, you can also set up a Z39.50 client target,
which points at your own Koha instance's Z39.50 authority server.
To find the hostname, go to /etc/koha-conf.xml and find the value for
the <listen id="authorityserver"> element. Depending on your
configuration, this could be something like the following:
unix:/zebra/koha/var/run/zebradb/authoritysocket
(N.B. You might be using a different scheme than unix sockets...)
To find the database, scroll down to the bottom of koha-conf.xml until
you reach the <config> element. Within this, look for the value of the
element <authorityserver>. It should probably be "authorities".
To set up this Z39.50 client target in Koha...
Z39.50 server: my koha authorities
Hostname: unix:/zebra/koha/var/run/zebradb/authoritysocket
Port:
Database: authorities
Userid:
Password:
Syntax: MARC21/USMARC (or whichever flavour you need)
Encoding: utf8
Signed-off-by: Mason James <mtj@kohaaloha.com>
Bug 10096 [FOLLOW-UP] - Add a z39.50 interface for authority searching
This patch adds the "recordtype" column to the "z3950servers" table.
The value in this column (biblio or authority) then controls whether
the z3950 server shows up in a bibliographic search (through the
Acq and Cataloguing modules) or in an authority search (through
the Authorities module).
I also edited the z3950 management console to show this value
and allow users to edit it. The default value is "biblio", since
the vast majority of z3950 targets will be bibliographic. However,
there is an option to add/edit a z3950 target as a source of
authority records.
Test Plan:
1) Apply both patches
2) Run updatedatabase.pl (after setting your KOHA_CONF and PERL5
environmental variables)
3) Use the test plan from the 1st patch
N.B. Make sure that your Z39.50 client target has a Record Type
of Authority, otherwise it won't display when you're doing a
Z3950 search for authorities.
Signed-off-by: Mason James <mtj@kohaaloha.com>
Bug 10096 [FOLLOW-UP] - fix tabs/whitespace errors to pass QA
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The current implementation didn't build the cookie array correctly,
yielding login problems in some scenarios.
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Passing language=<valid_language_code> as a parameter in any Koha's URL
can be used to set the desired language.
This patch touches
- C4::Templates
- C4::Auth
Adds a new method getlanguagecookie that does exactly that, for use in
get_template_and_user.
Also modifies getlanguage so it checks (a) if there's a 'language'
parameter in the CGI object and (b) checks if its valid and enabled for
the desired interface.
To test:
* Without the patch
- access any koha page
- add ?language=code to the end of the URL (change code for a valid language code
it needs to be installed using perl translate install code, and enabled either for
the staff or opac interface, depending where are you testing)
- Nothing happens with the language parameter
* With the patch
- access any koha page
- add ?language=code (the same as before) and hit enter
- the language should be changed to the one you chose
- if you browse through some links, you will see
koha 'remembers' the language you passed as a parameter
(i.e. the language cookie has been updated).
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Brendan <brendan@bywatersolutions.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Works very well. No errors.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
More comments on last patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Small patch to make koha-qa happy.
Fixes small POD error
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test:
* SIP: Have an old user and create a new user
- use either tenet sip test or
C4/SIP/interactive_patron_check_password.pl to check old
userid/password
- do the same for the new user
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described
Test
1) using perl C4/SIP/interactive_patron_check_password.pl
can check current (short) and new (long) passwords
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test:
* LDAP:
- Turn on LDAP auth in koha-config.xml. Set "update" in your server config to 1
- Change user's password on LDAP
- Login to Koha using LDAP - Koha password should be updated, to check
- Turn off LDAP auth in koha-config.xml
- You should be ble to log in with the new password
I do not have a LDAP facility, so I cheated. I ran
perl -e 'use C4::Auth_with_ldap; C4::Auth_with_ldap::_do_changepassword("srdjan", 1000022259, "srdjan");'
and was able to change the password.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described.
Test
1) change <useldapserver> to 1
2) copy/paste sample <ldapserver> config from perldoc C4/Auth_with_ldap
3) using sample script was able to change password,
use (userid, borrowernumber, newpass) as arguments
4) checked with OPAC and in database
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
RM note: Digest::MD5 is used in C4::ImportExportFramework as part
of an unnecessary reimplementation of functionality supplied by
File::Temp. See bug 10991 for a proposal to remove it.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
What this patch aims to accomplish?
* All new passwords are stored as Bcrypt-hashes
* For password verification:
- If the user was created before this patch was applied then use
MD5 to hash the entered password <-- backwards compatibility
- If the user was created after this patch was applied then use
Bcrypt to hash the entered password
* Any password change made via the staff interface or the OPAC will
be automatically Bcrypt-hashed; this applies to old users whose
passwords were stored as MD5 hashes previously
Test plan:
1) Add new users and check whether their passwords are stored as
Bcrypt hashes or not.
2) To test that authentication works for both old as well as new
users:
a) Login as an existing user whose password is stored as a
MD5 hash
b) Login as an existing user whose password is stored as a
Bcrypt hash
3) In the staff interface, change the password of an existing user
whose password is stored as an MD5 hash
a) Check the new password is stored as a Bcrypt-hash in the database
b) Try to login with the new password
4) In the OPAC, verify that
a) Old user with old pass can change password, new format
b) New user with new pass can change password
c) Old and new user with self-updated pass can login
Whitespace cleanup was contributed by Bernardo Gonzalez Kriegel.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 10925 removes the last call to C4::Utils.
The module becomes useless and can be deleted.
Verify that t/db_dependent/Context.t still successfully passes.
git grep hashdump
git grep maxwidth
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, no subs from the module are used anywhere
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This fixes a regression introduced by the patch for bug
9394 -- when printing a hold slip using the 'print and confirm'
button, the slip would contain only the text 'reserve not found',
not a full hold slip.
This patch also adds a regression test.
To test:
[1] Check in an item that would fill a hold. Use the 'print
and confirm button' to confirm the hold.
[2] The printout will only contain text to the effect of
'reserve not found'.
[3] Apply the patch.
[4] Repeat step 1. This time, a full hold slip should be printed.
[5] Verify that prove -v t/db_dependent/Reserves.t passes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Pass all tests, new and old, and QA script.
Verified wrong and corrected behaviour.
Note: Sometimes there will not be the message 'reserve not found'
showing up, but hold information for a different record. This happens
when there exists a reserve_id with the borrowernumber of the patron
in question in your database.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To reproduce:
1/ Edit your apache virtual host and set the DEBUG environment variable
(SetEnv DEBUG 1).
2/ Try to login with an ldap user
3/ You will be redirected to the 500 error page.
The Koha logs contains:
malformed header from script. Bad header=------------------------------: mainpage.pl
The hashdump routine directly prints to STDOUT (!) and breaks the
headers.
It appears Net::LDAP::?->dump does the same thing.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Maybe we can kill C4::Utils after getting rid of this
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test:
- Configure an LDAP server and $KOHA_CONF, etc.
- Make sure ExtendedPatronAttributes is defined and that
there is no attribute defined that is specified to be
a unique ID.
- Try to log in using an account originating from the
LDAP directory.
- You will got a software error:
Can't use an undefined value as an ARRAY reference at
/home/koha/src/C4/Auth_with_ldap.pm line 183.
- Apply the patch.
- Try to log in again; this time it should work.
Signed-off-by: Nuño López Ansótegui <nunyo@masmedios.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Description:
A new pref ConfirmFutureHolds is added. When confirming a hold at checkin time,
the number of days in this pref is taken into account when looking for reserves.
Note that this pref does not interfere with renewing, issuing or transferring
a book. For report Holds to pull, the default end date is calculated with this
new preference.
The use of ConfirmFutureHolds is useful only when future holds are allowed.
Test plan:
1) Enable future holds. Add a number of days into ConfirmFutureHolds.
2) Place a future hold within this number of days.
3) Run holds to pull report. Check default startdate and enddate.
4) Check this book in. Can you confirm the hold? Do not confirm.
5) Issue the book to another patron. You should not see a warning.
6) Renew the book for this patron via opac or staff. No warning either.
7) Check in again. Warning pops up again.
8) Transfer book. Switch branch. Check in. Hold found pops up. Do not confirm.
9) Back to first branch. Check in (with popup). Remove the hold. Add new future
hold past the number of days. Check in (no warn).
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch improves the POD for C4::BackgroundJob->get(). It also
fixes ->set() so that it cannot scribble over values that are properly
internal to the object.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
After executing a batch items modifications, a dialog is displayed above
the result table. It contains the number of items (and total fields)
which has been modified.
Note that items that are selected for modification but which do not
end up actually be changed are not reported in the final counts.
This patch adds two methiods to C4::BackgroundJob, ->set() and ->get(),
that allow background jobs to pass arbitrary data back to the client.
Test plan:
1/ Go to tools/batchMod.pl
2/ Enter a barcodes list
3/ Check/uncheck items and fill some values to apply
4/ Save
5/ The table summary will be displayed with a dialog box on top:
XX item(s) modified (with YY fields modified)
Check that XX and YY correspond with what you expected.
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
batch modification still seems to work correctly, with the helpful addition of the counter. Thanks!
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Sometimes when using the batch item modification tool, we would like to
automatically uncheck on loan items.
This patch also adds a new routine in C4::Circulation, IsItemIssued(),
which, when passed an itemnumber, returns whether the item is
currently on loan.
Test plan:
1/ Go to tools/batchMod.pl.
2/ Enter some barcode (at least 1 should be on loan).
3/ Click on the Continue button.
4/ Click on the "Clear on loan" link.
5/ Check that on loan items are unchecked.
Launch the unit test file:
prove t/db_dependent/Circulation/IsItemIssued.t
http://bugs.koha-community.org/show_bug.cgi?id=10572
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Works as expected, only modifies items that are checked (still). No regression noted.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds several unit tests for GetHiddenItemnumbers and fixes the POD for it.
It also wraps the tests for rollback, modernizes and adds a license text to it.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
There should be a:
"require YAML;"
or
"use YAML qw/Load/;"
as the GetHiddenItems routine has a reference to YAML::Load.
This was discovered while adding a GetHiddenItems() call into
opac/opac-MARCdetail.pl. I believe this problem dates back to
bug 6488 or bug 5984.
I also added an optimization to GetHiddenItems to prevent
processing if there is nothing in the system preference. Test
by searching for a biblio which has some or all of its items
hidden.
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Maybe
return () unless $yaml =~ /\S/;
or
return () if $yaml =~ /^\s*$/;
would have been easier to read.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
no need to create a variable just to call to send it as parameter the line after
Signed off by: Alex Hatley <alexh@cctexas.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds functionality to forgive overdue fine when an item is
set to lost status. Fines are forgiven only when the syspref
WhenLostForgiveFine is set to yes. Item can be set to lost status from:
- catalogue/moredetail.pl
- cataloguing/additem.pl
- tools/batchMod.pl
- misc/cronjobs/longoverdue.pl
Changed subroutine C4::Circulation::LostItem to forgive fines on the
item depending on the value of syspref WhenLostForgiveFine. This
routine is currently used to return an item and charge a replacement
cost.
Also added a new syspref in C4::Circulation::LostItem -
WhenLostChargeReplacementFee. The replacement fee will now be charged
only if this syspref is set to yes. The default value of the
WhenLostChargeReplacementFee is yes, meaning that current behavior
will not change during upgrade.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Alex Hatley <alexh@cctexas.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Testing notes on last patch in series.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test authentication via ILS-DI:
- with userid and password
- with userid and wrong password
- with cardnumber and password
- with cardnumber and wrong password
...
Before the patch only userid will authenticate the patron.
After the patch was applied, userid and cardnumber will work.
To test:
- Run t/db_dependent/ILSDI_Services.t - all tests should pass.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No koha-qa errors
Test:
Enable ISL-DI
access opac with /cgi-bin/koha/ilsdi.pl?service=AuthenticatePatron&username=XXX&password=YYY
With userid/cardnumber & password returns borrowernumber
With userid/cardnumber & wrong password returns PatronNotFound
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds unit tests for Authenticate patron.
To test:
- Run perl t/db_dependent/ILSDI_Services.t
- Verify all tests pass
Note: there are some tests marked as TODO.
Rewriting AuthenticatePatron to make cardnumber and userid
work for authenticating a patron will be implemented in the
next patch. Tests related to this are currently showing as
'not ok', but are still passing.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No koha-qa errors
With both patches applied, all test pass.
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds a new column to item types. Text in this column is
displayed as a warning when an item of the given type is checked in.
The type of message can also be chosen, affecting how the message is
displayed.
Use case: Items that are on inter-library loan can have a separate
item type, and when items of this type are checked in a message
saying something like "ILL! Remember to return it to the owning
library!" can be displayed.
To test:
- Apply the patch
- Go to Home > Administration > Item types administration
- Check that there is a new column, called "Check in message"
- Edit an item type and add a check in message
- Check that the check in message you added is displayed in the table
- Check in an item with an item type that has a check in message
- Check that the message is displayed
- Repeat the steps above, but select "Alert" instead of the default
"Message" as the "Check in message type". Check that the message
is displayed in a yellow alert box, not a blue message box.
- Check in an item with an item type that does *not* have a check
in message, and make sure no false messages are displayed
- Create a new item type from scratch and check that it works
the way it is supposed to
- Run the tests in t/ItemType.t, which are updated by this patch
This patch also removes backticks around column names in the
itemtypes table in installer/data/mysql/kohastructure.sql
UPDATE 2013-07-22
- Rebased on current master (no changes)
- Added "AFTER summary" to the SQL statement in updatedatabase.pl
- Added another placeholder on line 170 of admin/itemtypes.pl
Thanks Katrin!
UPDATE 2013-07-29
- Make this message independent of all other messages - thanks Owen!
- Make it possible to choose the type of message ("alert" or
"message")
Sponsored-by: Kultur i Halland - Regionbibliotek
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed some tabs to make the QA script happy.
All old and new tests pass.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This allow to keep transfers informations without having untranslatable
strings in database.
Signed-off-by: sonia <koha@univ-lyon3.fr>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
On basket.pl and parcel.pl there is a 'Transfer' link which allow you to
transfer order lines from a basket to another.
The link leads to a new page which allow you to search for a bookseller,
then display this bookseller's baskets. Then you can pick a basket and
the transfer will be done.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Mathieu Saby <mathieu.saby@univ-rennes2.fr>
Signed-off-by: sonia <koha@univ-lyon3.fr>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Before, ModBookseller always returns undef. This patch modifies it in
order to be more explicit.
Now it returns :
1 -> If a modification has been done
0E0 -> If the given ID doesn't exist
undef -> If no ID given
It also fixes one of the tests which didn't pass before
in t/db_dependent/Bookseller.t
To Test:
prove t/db_dependent/Bookseller.t
Bookseller.t .. 1/54
[Some warnings about uninitialized values]
t/db_dependent/Bookseller.t .. ok
All tests successful.
Files=1, Tests=54, 1 wallclock secs ( 0.03 usr 0.00 sys + 0.46 cusr 0.04 csys = 0.53 CPU)
Result: PASS
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Change is logical and passes new and old tests.
Fixed the author line to have Kenza's correct email address.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes DelBookseller returns the number of suppliers it has
deleted or undef if an error has occurred.
It also fixes a test which doesn't pass before in t/db_dependent/Bookseller.t
To test:
prove t/db_dependent/Bookseller.t
t/db_dependent/Bookseller.t .. 1/54
All tests successful.
Files=1, Tests=54, 1 wallclock secs ( 0.02 usr 0.00 sys + 0.48 cusr 0.02 csys = 0.52 CPU)
Result: PASS
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Logical change and makes another test pass :)
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When requested by the summary flags the sipserver
should return in the patron info response barcodes of
the relevant titles.
For available holds this is the barcode of the captured items.
For unavailable holds ( i.e. current unsatisfied holds ),
we need to send a barcode so that the unit can use this to
request the title info. The barcode could be any one
belonging to the title.
This patch also corrects the erroneous return of empty items
in the patron information response. If the unit supplies a
range 1 - 100 unless the title has a hundred or more copies the
unit expects all copies. The server was erroneously stuffing
the returned arrays with null copies so that all summary requests
returned 100 copies (mainly without barcodes)
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Testing notes:
Using the test script provided on the bug report, but changed it
to match sip user and patron existing in my database.
Before applying the patch the SIP responses show the behaviour
pointed out above regarding the 100 items. After applying the
patch and restarting the SIP server responses are much more clean
not returning empty IDs.
64 Patron information response
AS = hold items
hold items count is correct.
AS contains barcodes of waiting holds.
Before patch, all AS were empty.
AT = overdue items
overdue items count is correct.
AT contains barcodes of overdue items.
AU = charged items
charged items count is correct.
AU contains barcodes of charged items.
AV = fine items
Judging from behaviour seen and comment in
Patrons.pm currently not implemented.
BU = recall items
Recalls are not implemented in Koha yet.
CD = unavailable hold items
unavailable items count is correct.
CD contains barcode for item level holds and is empty
for title level holds where no item can be determined.
Before patch, all CD were empty.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch fixes a copypasta'd copyright statement, and some incorrect
POD and indentation.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Switch to the new method of showing star ratings. Also, fix some
translation bugs, an error that occurred when caching was disabled and
add a stub unit test.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Show any relevant results from the OverDrive ebook/audiobook service
on the OPAC search. This is done by showing a link with "Found xx
results in the library's OverDrive collection" at the top of search
results and linking to a page that shows the full results.
This requires an OverDrive developer account, and is enabled by
setting the OverDriveClientKey and OverDriveClientSecret
system preferences. In addition, this patch adds the
OverDriveLibraryID system preference.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Henry Bankhead <hbankhead@losgatosca.gov>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch gives you the option of sending a patrons home branch code
in an AF field for patron status requests. It is controlled at the account
login level, so it can be enable on a per-sip-login basis.
Test Plan:
1) Apply patch
2) Edit SIPconfig.xml, add the parameter 'send_patron_home_library_in_af="1"'
to the login you will be using to test.
3) Start your SIP2 server.
4) Connect to it via telnet ( something like: '9300CNterm1|COterm1|CPCPL|' )
5) Send a patron status request ( like: '2300120121110 82925AOCPL|AA23529000035676|ACterm1|ADletmein' )
6) Examine reponse you should see something like this:
"24 00120121210 085332AEHenry Acevedo|AA23529000035676|BLY|CQN|AFGreetings from Koha. |AFMPL|AO|"
Note the second AF field with the value MPL.
Signed-off-by: George Williams <georgew@latahlibrary.org>
Signed-off-by: Christopher Brannon <cbrannon@cdalibrary.org>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The tests were too restrictive. It should be possible to pass
a checkin/checkout test with different values defined for
magnetic media.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Add a terminator option to SIPConfig.xml, choices for 'terminator' are
'CR' or 'CRLF'. The default continues to be 'CRLF' if 'terminator' is
undefined.
Test Plan:
1) Apply patch
2) Start SIP server
3) Run C4/SIP/t/04patron_status.t
4) Stop SIP server
5) Add terminator="CR" for account login 'term1'
6) Run 04patron_status.t again, you should see no change
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Signed-off-by: Adrien Saurat <adrien.saurat@biblibre.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Case-insensitivity of the system preference cache was introduced in
the patch for bug 6132. This patch corrects some breakage that
occurred. Longer-term, IMO a hard look needs to be taken at
using a case-insensitive collation for syspref codes, and coded
values in general.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
For Koha installations with multiple OPAC URLs, It would be nice to be
able to override systeprefs from the http conf file. Case in point,
a library wants to have two separate opacs, one the is only viewable
from within the library that allows patrons to place holds, and a second
public one that does not. In this case, overriding the system preference
RequestOnOpac would accomplish this simply, and with no ill affects.
This feature would of course be should only be used to override
cosmetic effects on the system, and should not be used for system
preferences such as CircControl, but would be great for preferences
such as OpacStarRatings, opacuserjs, OpacHighlightedWords and many
others!
Test Plan:
1) Apply this patch
2) Disable the system pref OpacHighlightedWords
3) Do a seach in the OPAC, not the term is not highlighted
4) Edit your koha-http.conf file, add the line
SetEnv OVERRIDE_SYSPREF_OpacHighlightedWords "1"
to your koha-http.conf file's OPAC section.
Also add the line
SetEnv OVERRIDE_SYSPREF_NAMES "OpacHighlightedWords"
to the Intranet section
5) Restart your web server, or just reload it's config
6) Do a seach, now your search term should be highlighted!
7) From the intranet preference editor, view the pref,
You should see a warning the this preference has been overridden.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch updates the wthdrawn field in items and deleteditems to be
withdrawn instead. No functional changes are made.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Save for translation files (that will be fixed on next release),
only occurrence of wthdrawn is on updatedatabase.pl
No koha-qa errors.
This touch many files, and I did not test everything,
but all seems normal. I think that any problem could
be fixed later.
Perhaps both entries in updatedatabase.pl could be joined
into one, but thats for QA.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The patch corrects the issue -- the content of the field 225 shall be
displayes under Series now.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Work as described, no koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Comparing the XSLT with the normal view the patch seems to
work correctly. Passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
CheckReserves was using the CircControl system preference to determine what
patrons an item can fill a hold for. It should be using ReservesControlBranch
instead.
Test Plan:
1) Set ReservesControlBranch to "item's home library".
2) Create an item at Library A, place holds for it for patrons at
Library B, Library C, and Library A in that order,
for pickup at the patrons home library.
3) Make sure the holds policy for Library A is set to
Hold Policy = "From home library" and
Return Policy = "Item returns home".
Make sure the holds policies for the other libraries are set to
Hold Policy = "From any library".
4) Check the item in at Library C, the hold for the patron at Library B
should pop up, even though it's in violation of the circulation rules.
Don't click the confirm button!
5) Apply this patch, and reload the page,
now the hold listed should be for the last hold,
the hold for the patron at Library A, which is correct.
This patch adds the subroutine C4::Reserves::GetReservesControlBranch as
an equivilent to C4::Circulation::_GetCircControlBranch.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed POD so that arguments and explanation match (C<$item>).
Also tested opac-reserves.pl for regressions.
Passes all tests, QA script, and Reserves.t.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Remove uncalled sub GetCcodes
Also remove comment in opac-search.pl which is
remaining reference to it and serves no
useful purpose
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The OPAC description for an authorized value is not required to be
populated. In particular, if it is NULL, the staff description is
displayed instead.
This patch makes sure that the sort order (in OPAC mode) uses either
the staff description or the OPAC description as needed for each
value.
To test:
[1] Make sure that AdvancedSearchTypes includes "ccode"
[1] Arrange your CCODE values so the sort order for staff labels
is different from the sort order for OPAC descriptions. Also,
ensure that one of the OPAC descriptions is NULL. For example,
authorised_value | lib | lib_opac
--------------------------------------
ZZZ | A_STAFF | Z_PUBLIC
DDD | D_STAFF | NULL
AAA | Z_STAFF | A_PUBLIC
[2] Prior to the patch, any CCODE values where the OPAC description
is NULL will sort first in the OPAC advanced search page, even
if the displayed label shouldn't come first.
[3] Apply the patch.
[4] Verify that the collection list on the OPAC advanced search page
is now correct.
[5] Verify that the sort order on the staff advanced search page
has not changed.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works nicely, tested in staff and OPAC.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Collection codes and shelving locations are displayed in the OPAC and
staff client via GetAuthorisedValues which currently sorts results by
"lib, lib_opac." Consequently if lib (the description for the staff
client) doesn't match lib_opac (the description for the OPAC) sorting
will appear to be nonsensical in the OPAC. GetAuthorisedValues can be
passed an $opac parameter, so this should be used to switch how reuslts
are sorted. This patch implements such a switch.
To test, modify your collection code or shelving location authorized
values so that lib and lib_opac do not match. Set your
AdvancedSearchTypes system preference to display the modified authorized
values and view the advanced search page in the OPAC and staff client.
Sorting should be correct in each case according to the correct value
(lib in the staff client, lib_opac in the OPAC).
Signed-off-by: Nicole C. Engard <nengard@bywatersolutions.com>
Tested in staff and opac and it works perfectly!
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Add an option to cleanup_database.pl to purge the search_history
entries older than X days.
Test plan:
- Apply patch
- Check that your test DB has some entries a little older than 30 days
and a few ones even older than that in search_history:
SELECT * FROM search_history WHERE time < DATE_SUB( NOW(), INTERVAL 30 DAY );
If not, modify some existing entries.
- Run cleanup_database with a fixed number of days (replace XX with
something higher than 30)
/misc/cronjobs/cleanup_database.pl --searchhistory XX
- Check that entries older than XX days got deleted from search_history
- Run without the day parameter
/misc/cronjobs/cleanup_database.pl --searchhistory
- Check that entries older than 30 days got deleted from search_history
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Need to check for definedness, not Perl truth.
Also adds description of the return value to the POD.
To test:
Run prove -v t/db_dependent/Circulation_transfers.t and verify that
the tests pass.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds return values to DeleteBranchTransferLimits:
1 if a Transfer Limit is deleted
undef if no parameters is given
0E0 if a wrong parameter is given
More, it fixes and adds some tests in t/db_dependent/Circulation_transfers.t
To test :
prove t/db_dependent/Circulation_transfers.t
t/db_dependent/Circulation_transfers.t .. ok
All tests successful.
Files=1, Tests=14, 19 wallclock secs ( 0.02 usr 0.01 sys + 0.39 cusr 0.02 csys = 0.44 CPU)
Result: PASS
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested with patch for bug 10692 applied.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
There is nothing prevent '0' from being used as a library code.
To test:
Run prove -v t/db_dependent/Circulation_transfers.t and verify that
the tests pass.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch test if the parameters $toBranch and $fromBranch are given.
If not, CreateBranchTransferLimit now returns undef.
This patch also fixes and adds some regression tests in
t/db_dependent/Circulation_transfers.t
NOTE:
Currently, we can add a transferlimit to nonexistent branches because
in the database branch_transfer_limits.toBranch
and branch_transfer_limits.fromBranch aren't foreign keys.
To test:
prove t/db_dependent/Circulation_transfers.t
t/db_dependent/Circulation_transfers.t .. ok
All tests successful.
Files=1, Tests=15, 18 wallclock secs ( 0.02 usr 0.01 sys + 0.42 cusr 0.00 csys = 0.45 CPU)
Result: PASS
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
All tests and QA script pass.
Test plan :
Check if the regression tests still works
prove t/db_dependent/Branch.t
t/db_dependent/Branch.t .. 1/36 Using a hash as a reference is deprecated at t/db_dependent/Branch.t line 207.
t/db_dependent/Branch.t .. ok
All tests successful.
Files=1, Tests=36, 0 wallclock secs ( 0.03 usr 0.01 sys + 0.12 cusr 0.00 csys = 0.16 CPU)
Result: PASS
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
From the man page
finsh()
Indicate that no more data will be fetched from this statement handle
before it is either executed again or destroyed.
You almost certainly do not need to call this method.
Adding calls to "finish" after loop that fetches all rows is a common
mistake, don't do it, it can mask genuine problems like uncaught fetch errors.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test:
[1] Turn on the syspref for enabling OPAC holds.
[2] Create an item and bring it up on the OPAC search
results. Run through the following possibilities,
by changing the item, and verify that the place hold
link in OPAC search results appears only when the item is
- not lost AND
- not withdrawn AND
- not damaged (or is damged and AllowHoldsOnDamagedItems is ON) AND
- the item is not marked not-for-loan OR
the item has a negative notforloan value (e.g., it is on order)
Note that it is necessary to reindex the test bib after making
each change to the test item.
[3] Also verify that whether or not in the item is in transit does
NOT affect whether the place hold link appears.
[4] Verify that there is no regression on bug 8975 (i.e., if an
item is on order, that status should be displayed in staff client
search results).
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In search results, one could not place a hold on an item in transit
and for loan (items.notforloan=0). This appears when AllowOnShelfHolds
is allowed.
This patch repairs a regression introduced by the patch for bug 8975.
Test plan :
- Set AllowOnShelfHolds to on
- Create a record with a normal item : not lost, not withdrawn, not
damaged, notforloan=0
- Index this record
- Perform a search on OPAC that returns this record (and others)
=> You see in actions "Place hold"
- Add this item in transit : /cgi-bin/koha/circ/branchtransfers.pl
- Re-perform the search on OPAC
=> You see in actions "Place hold" and item "in transit"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
1/ delete_report should return undef is no parameter is given.
2/ delete_report returns the number of affected rows.
3/ delete_report should be tested with 1 and more parameters.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The first patch add a bad indentation for this routine. This patch fixes
that.
Also, the $sth->finish statement is useless and was removed.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds the option to select multiple saved reports for
deletion.
To test you must have two or more saved reports to delete. Deletion
should work properly when:
- Selecting one report for deletion by checking the box.
- Selecting more than one report for deletion by checking boxes.
- Clicking the old "Delete" link
Clicking the delete button should prompt you to confirm. Clicking cancel
should cancel.
Clicking the delete button when no boxes are checked should trigger an
alert asking you to select reports for deletion.
Signed-off-by: Liz Rea <wizzyrea@gmail.com>
Functional tests pass, template tests pass.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
For some reason, C4::HoldsQueue::MapItemsToHoldRequests used the system
preference AutomaticItemReturn to decide if an attempt to fill local
holds with local items. No explanation of this behavior is provided.
This patch removes this behavior, and also adjusts the calculation
of the lead-cost library to always return the pickup library if it
is on the list of libraries that could fill the hold -- on the
basis that if the item is already at the pickup library, its
transport cost is inherently zero.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes QA script and adds unit tests.
Tested with some examples and those worked correctly.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch updates the example template syntax in the POD for
C4::Branch::GetBranches() to use Template Toolkit syntax.
To test, view the POD for C4::Branch::GetBranches() and confirm that it
looks correct.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Checked the POD with "perldoc C4/Branch.pm" before and after applying
the patch. The example now uses TT syntax, and looks sensible.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch updates the example template syntax in the POD for
C4::Creators::Lib::html_table() to use Template Toolkit syntax.
To test, view the POD for C4::Creators::Lib::html_table() and confirm
that it looks correct.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Checked the POD with "perldoc C4/Creators/Lib.pm" before and after applying
the patch. The example now uses TT syntax, and looks sensible.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch updates the example template syntax in the POD for
C4::Items::GetItemStatus() to use Template Toolkit syntax.
To test, view the POD for C4::Items::GetItemStatus() and confirm that it
looks correct.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
This patch works as advertised (verified with "perldoc C4::Items"),
for GetItemStatus, but it does not fix a a similar example for
GetItemLocation in the same file, which still has the old template
syntax. So a followup or separate bug for that is called for.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
It seems the default option is not in used in templates.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch updates the example template syntax in the POD for
C4::Koha::GetSupportList() to use Template Toolkit syntax.
To test, view the POD for C4::Koha::GetSupportList() and confirm that
it looks correct.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
This patch works as advertised (verified with "perldoc C4::Koha"),
for GetSupportList, but it does not fix a a similar example for
GetItemTypes, getauthtypes and getframework in the same file,
which still has the old template syntax. So a followup or separate
bug(s) for those are called for.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
It seems the default option is not in used in templates.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
With IndependentBranches turned on, if you try to check out an item
which belongs to another library you will get an error message which is
missing the library name. This patch corrects the problem by passing the
necessary variable to the template and outputting the library name using
the KohaBranchName TT plugin.
To test, turn on IndependentBranches and try to check out an item
belonging to another library (note that you must test with a staff user
who is not a superlibrarian). The error message you see should include
the name of the library to which the item belongs:
"This item belongs to Nelsonville and cannot be checked out from this
location."
Checkouts of items belonging to the library should be unaffected.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The OPAC still uses the old tablesorter plugin which isn't being
actively maintained. We use DataTables in the staff client and should in
the OPAC too. The plugin was added a while ago but never implemented on
any pages. This patch upgrades the plugin to the latest version and
places it in opac-tmpl/lib for cross-theme access. The patch implements
DataTables on all pages which previously used the tablesorter plugin.
The old tablesorter plugin is removed.
The customized DataTable configuration script, datatables.js, has been
trimmed-down from the staff client version in order to limit it to only
that functionality required in the OPAC.
Sorting based on date is done based on the data's enclosing <span> title
attribute as it is in the staff client:
<span title=" [% iso date %]">[% date | $KohaDates %]</span>
Slight modifications to Serials.pm and opac-search-history.pl have been
made to accommodate this change.
To test, view each page in the OPAC which uses JS-based table sorting:
- The bibliographic detail page
- The cart
- The search history page
- The suggestions page
- The tags page (logged in as a user who has entered tags)
- The "most popular" page (opac-topissues.pl)
- The logged in user summary page (opac-user.pl)
- The subscription "full history" page (opac-serial-issues.pl?selectview=full)
- The self-checkout main page (with existing checkouts)
Table sorting should work correctly on all pages in both the prog and
ccsr themes. Sorting should work for dates whatever your dateformat
system preference setting. Tables listing titles should exclude articles
("a," "an," and "the" in English) when sorting.
Also test the serial collection page in the staff client, which is
affected by the change to Serials.pm. Confirm that dates are displayed
and sorted correctly.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, works as advertised!
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works really nicely on all pages.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In C4::Acquisition::ModReceiveOrder, a call to NewOrder is badly used.
NewOrder returns ($basketno, $ordernumber) but in ModReceiveOrder the
ordernumber is got with
my $ordernumber = NewOrder( $args );
It works because:
sub t{
return ("a", "b");
}
my $a = t();
say $a;
Will display 'b'.
But it is not really clear.
Test plan:
Check that there is no regression for partial receives.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
From the man page
finish()
Indicate that no more data will be fetched from this statement handle
before it is either executed again or destroyed.
You almost certainly do not need to call this method.
Adding calls to "finish" after loop that fetches all rows is a common
mistake, don't do it, it can mask genuine problems like uncaught fetch errors.
To test:
Verify that prove -v t/db_dependent/RotatingCollections.t passes
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Passes koha-qa.pl, passes UT provided by bug 10653
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch teaches GetHoldsQueueItems to consult
the item-level_itypes system preference and return
the item-level or bib-level item type accordingly.
To test:
- Arrange so that an item that shows up on the holds queue
report has one item type while its bib has a different one.
- Run the report with item-level_itypes ON. Verify that
the item-level item type is displayed.
- Change item-level_itypes to OFF. Run the report again and
verify that the bib-level item type is displayed.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The hold queue report shows collection code but not item type. This
patch adds it. Also added is use of the KohaAuthorisedValues template
plugin to display the collection code description instead of code.
To test, apply the patch and view the holds queue. There should be a new
item type column showing an item type description for each row. The
collection column should now show the collection description instead of
code.
Signed-off-by: Melia Meggs <melia@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
When a patron changes to a category with enrollment fee, they
are not generated.
Test plan:
- Choose a category without fee (e.g. Kid)
- Add an enrollment fee for another category (e.g. Young adult)
- Choose a kid and change his category to "Young adult".
- Note the warning message "Fees & Charges: Patron has Outstanding fees
& charges of XX" on the check out page.
This patch also moves all instances of adding the enrollment fee
to a new routine in C4::Members, AddEnrolmentFeeIfNeeded(), so
additional tests include:
- Register a new patron and give it a category that has
an enrollment fee. Verify that the fee is charged.
- Renew the patron. Verify that the additional fee is charged.
- Register a new patron with a child patron category.
- Use the 'update child to adult' menu option to change the
patron's category to one that is fee-bearing. Verify that the
enrollment fee was charged.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This reverts changes made to CanBookBeRenewed by
patches from bug 9367.
GetReserveStatus is not suitable to recognize if an item
can fild a hold on return and CheckReserves is restored.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
This patch includes a squash of a follow-up authored by
Katrin Fischer <Katrin.Fischer.83@web.de>:
CheckReserves returns '' when no reserve is found,
so $resfound will always be defined and we need to
check if it's true.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test Plan:
1) Enable the syspref emailLibrarianWhenHoldIsPlaced
2) Modify the HOLDPLACED notice, add some item level fields
3) Place an item level hold
4) Check the email you receive ( or just look at it from the db )
You should see the item level fields are new populated
5) Place a title level hold
6) Check the email you receive - item fields are not populated,
but notice still looks ok.
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This makes the POD for the columns() function consistent
with the rest of C4/Members.pm. It also removes a note
that can be relegated to the bug report and the Git
history.
Also, since C4::Members::columns() is not actually a
class method, this patch changes the invocation to
not call it that way.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
