This patch adds a sample koha-sites.conf file, which will be
included by the koha-common package in /etc/koha (where it belongs).
It is fixed to include the current defaults (DOM indexing for both
biblios and authorities, disabled use of memcached, and good defaults
for a normal setup if enabled).
All options are commented for ease of use by average users.
To test
- verify that the defaults are sane (let me know if it needs to be
fixed).
- build the package and verify that the file gets installed.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch adds locking to rebuild_zebra.pl to ensure that simultaneous
changes are prevented (as one is likely to overwrite the other).
Incremental updates in daemon mode will skipped if the lock is busy
and they will be picked up on the next pass. Non-daemon mode
invocations will also exit immediately if they cannot get the lock
unless the new flag -wait-for-lock is specified, in which case they
will wait until the get the lock and then proceed.
Supporting changes made to Makefile.PL and templates for the new
locking directory (paralleling the other zebra lock directories).
We stash the zebra_lockdir in koha-conf.xml so rebuild_zebra.pl
can find it.
To address earlier QA concerns we:
1. added code to check if flock is available and ignore locking if
it's missing (from M. de Rooy)
2. changed default for adhoc invocations to abort if they cannot
obtain the lock. Added option -wait-for-lock if the user prefers
to wait until the lock is free, and then continue processing.
3. added missing entry to t/db_dependent/zebra_config.pl
4. added a fallback locking directory of /tmp
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Doug merged the original patch with the QA changes.
Just for the record, noting here that the original patch was tested
extensively too by Martin Renvoize.
I have added a followup for some exceptional cases.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The last use of the POE family of Perl modules went away with
the removal of zebraqueue_daemon.pl per bug 9001. Consequently,
this patch removes POE as a dependency.
To test:
[1] Verify that "git grep POE" and "git grep libpoe" report
nothing.
[2] Verify that koha_perl_deps.pl -a does not report POE
as a dependency.
[3] (extra credit) verify that Debian packages can be built
that do not list libpoe-perl as a dependency.
This patch also updates some distro-specific installation
instructions and scripts, but makes no representations about
whether those instructions currently work.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
While adding the --help and -h switches I forgot to change to arguments
count validation so that one can actually use those parameters (i.e.
koha-create should accept being invoked with only one parameter).
This patch just changes the minimum parateres required from 2 to 1.
To reproduce:
- Run 'koha-create --help' from master
=> Usage information is printed BUT ALSO an "Error: wrong parameters"
message
- Apply the patch and
- Run 'koha-create --help'
=> Usage informatio it printed and no error message.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
'en' is not a translation and it doesn't make any sense to return it as
part of the installed translations or the available ones.
It becomes relevant to remove it as users upgrading their installed
translations end up grepping the output to remove 'en' like in:
for lang in $(koha-translate --list | grep -v -x -e 'en') ; do
koha-translate --update $lang
done
instead of simply issuing the koha-translate --list command.
To test:
- Run
./koha-translate --list
./koha-translate --list --available
=> It shouldn't return 'en' in the result list.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
To test:
Install the packages with this patch, observe the /etc/cron.daily/koha-common
file - auto_unsuspend_holds should now be in the default list.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The -v and --verbose option switches add the --verbose switch to the
misc/translator/translate script call in the packages' 'koha-translate'
command.
The docs are updated accordingly.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Works as expected with and without -v. Man page looks good.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes koha-create print better and more descriptive usage
information. Also adds the --help and -h switches.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Removed trailing " from:
$scriptname [db usage mode] [options] instancename"
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The koha-translate's usage message has a couple of inconsistencies:
'--all' should be '--available'
and '--help' is missing from the usage examples.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, tested using instructions on
http://wiki.koha-community.org/wiki/Testing_man_pages
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Koha requires mod_rewrite. If it's not enabled in Apache, then
koha-create will now abort with a helpful error message. Also adds a
warning when not run as root to avoid confusing errors.
Test plan:
* apply the patch
* a2dismod rewrite
* run koha-create without sudo, note the error about being root
* run koha-create with sudo, note the error about rewrite
* a2enmod rewrute
* repeat test above, note that it works
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Works as expected.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Trivial patch to add 'cron-daemon' as dependency for the koha-common
package. 'cron' is usually pulled in any minimal Ubuntu/Debian
install, but in some circumstances (using debootstrap) it might be
absent.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
No entry in debian/control yet, but
according to comments in the file this file is generated
from control.in - so this should be ok.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Older versions of Koha didn't have <backupdir>...</backupdir> defined in
koha-conf.xml. The koha-dump script is aware of this, and checks to see
if it's there. However, if it's not, xmlstarlet returns a non-0 error
code which causes the script to abort due to running under set -e.
Test plan:
* Remove backupdir from koha-conf.xml
* Run koha-dump, notice that it doesn't do backups
* Apply patch
* Run koha-dump again, notice that it does do backups
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The fallback method works as described. It might be made more robust
like checking for dir existence (thinking of older instances upgrades).
But it certainly belongs to another bug report.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
As Tomas said, it would be better to alert the user if the backupdir tag
does not exist (or contains a nonexistent directory) in the config file.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If koha-common is started when Zebra log files are owned by root
it will fail to start without any useful message (since Zebra can't
write errors in log files because it lacks permissions to do so).
This patch creates empty log files and ensure they have correct
permissions.
I can't pin-point why log files gets owned root, but I suspect it
has something to do with Zebra crashing and logrotate, but this is
just theory. We have seen this behaviour since koha 3.1 every
few months, and every time it happends we have root owned logs and
crashed Zebra so this patch will at least help sites which have
some kind of automatic koha-common start if it's not running.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
As configuration variables from koha-sites.conf overwrite the ones in the
koha-create script we need to unset them in case we have USE_MEMCACHED="no".
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes the koha-create script adjust the koha-conf.xml file
with the proper string substitutions to enable the use of memcached
for the created Koha instance.
It adds three option switches that control this:
--use-memcached (defaults to "no")
--memcached-servers "host1:port1,..." (defaults to '127.0.0.1:11211')
--memcached-prefix "desired_namespace prefix" (defaults to 'koha_')
It respects the current schema configuration schema, where configuration
values are pondered like this:
hardcoded < koha-sites.conf < koha-create option switches
koha-sites.conf is read for USE_MEMCACHED, MEMCACHED_SERVERS and
MEMCACHED_PREFIX.
Note: the docs discourage setting user's own namespace prefix.
Using memcached is off as the default. The relevant configuration
variables will remain empty if the user doesn't pass --use-memcached
to the command. It matches the current behaviour.
To test:
- Apply the patch
- Build your own packages and install them on a test server
a) Create a new instance without using the new switches like:
$ koha-create --create-db memctest
- Check that /etc/koha/sites/memctest/koha-conf.xml contains:
* Empty <memcached_servers> tag.
* Empty <memcached_namespace> tag.
b) Play with the possible combination of option switches
(Note that the code defaults to empty and will remain like that if
--use-memcached is not used, so less tests...)
$ koha-create --create-db --use-memcached memctest
$ koha-create --create-db --use-memcached --memcached-servers "anything:xxx" memctest
$ koha-create --create-db --use-memcached --memcached-servers "anything:xxx" --memcached-prefix "something" memctest
$ koha-create --create-db --use-memcached --memcached-prefix "something" memctest
- Check the koha-conf.xml and /etc/apache2/sites-enabled/memctest
file reflect the chosen options.
c) Run
$ koha-create --help
- It should advertise this addition accordingly.
d) Run
$ man koha-create
- Man page for koha-create should provide good information on the new
switches behaviour
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Adds 'memcached' to the control.in file so the user is suggested by apt
to install it.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
* Added base class files for all tables in koha using
DBIx::Class::Schema::Loader.
* Added a (very basic) test file for C4::Context
* Also added dependencies in required files.
To Test:
[1] Install patch
[2] Make sure you can still connect to Koha
[3] You may optionally run this test script:
use Koha::Database;
use Data::Dumper;
my $db = Koha::Database->new();
my $schema = $db->schema();
print Dumper($schema->resultset("Borrower"));
If you run this file you should get a DBIx dump of the borrowers table.
Signed-off-by: wajasu <matted-34813@mypacks.net>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes the init script return the status of the relevant
processes.
To test:
- Apply the patch, build package and install
- Run
$ service koha-common status
Note: it can be tested just copying the debian/koha-common.init script
to a server running koha-common instances and calling it
$ ./koha-common.init status
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The original patch for bug 10622 added the --sip, --nosip and
--help switches to the koha-list command, but did not update the
manpage for the command. This patch does.
To test:
Run these commands and look at the formatted man page:
$ xsltproc /usr/share/xml/docbook/stylesheet/docbook-xsl/manpages/docbook.xsl \
debian/docs/koha-list.xml
$ man -l koha-list.8
Make sure this test passes:
$ prove -v xt/verify-debian-docbook.t
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Forgot the docs this time, good catch Magnus
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Just added those switches.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
I applied the patch on my local dev install, and then copied the
patched koha-list script to a couple of servers with actual
instances running off the packages, to test the script.
- It seems that the -h switch did not work before this patch, now
both -h and --help works nicely
- --sip and --nosip work as expected, also in combination with
--email and --noemail
The patch does not add --sip and --nosip to the man page for
koha-list, but I will do a followup for that.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Removed unused stuff, added a new config file /etc/default/koha-common
to control the init script behaviour. Currently is only a stub. The config
file could be put on /etc/sysconfig on RedHat and friends. The init script
should work them too. Added a TODO comment regarding the 'status' switch.
To test:
- Apply the patch on master, build your own packages and install.
- The init script should continue to work as expected.
(it can be tested replacing the /etc/init.d/koha-common file with
debian/koha-common.init on a packages install).
- The absence of the /etc/default/koha-common file should not prevent
the init script from working.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
While bug 8911 fixed a problem regarding history.txt, a proper fix for
packages was missing.
This patch does three things:
- Adds docs/history.txt to debian/koha-common.docs so it gets installed.
- Moves the line installing the release notes from debian/koha-common.install
to debian/koha-common.docs.
- Adds an override_dh_compress entry in debian/rules that excludes
history.txt from the dh_compress routine [1]
To test:
- Take a picture of how /usr/share/doc/koha-common looks.
- Apply the patch and build a package.
- Upgrade and/or install using your package.
- Look for the contents of the /usr/share/doc/koha-common, it should
look the same, but history.txt must be there.
- More > About Koha > Koha Timeline should show the history lines.
[1] As 'man dh_compress' says, it is needed as every file considered for
the doc dir that is plain text and is more than 4k size will be
gzipped unless stated otherwise. We need it uncompressed for about.pl.
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
New installs get the message about running a script if upgrading from
3.2. They shouldn't. This silences this message in all cases except when
you actually are upgrading from 3.2.
Test plan:
There are three scenarios to test:
1) A fresh install should not cause the prompt.
2) An upgrade with or without the debconf entry set should not cause the
prompt.
3) An upgrade from a 3.2 release to this should cause the prompt.
To remove the debconf entry that says the prompt has been seen:
echo 'unregister koha-common/3.2-3.4-upgrade-notice' | sudo debconf-communicate koha-common
This should be run before every test to make debconf forget that it's
shown the prompt. To get its current state:
sudo debconf-show koha-common
To test against the 3.2 version, an empty package that claims to be Koha
3.2.2 is attached to the bug.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
It might not be immediately obvious that it is possible to send
SQL queries "directly" to the koha-mysql command, or that files
from mysqldump can be loaded with it. This patch adds these as
"example usage" to the man page for koha-mysql.
To test:
Run these commands and look at the formatted man page:
$ xsltproc /usr/share/xml/docbook/stylesheet/docbook-xsl/manpages/docbook.xsl \
debian/docs/koha-mysql.xml
$ man -l koha-mysql.8
Make sure this test passes:
$ prove -v xt/verify-debian-docbook.t
This patch also corrects a couple places where "Koha" was written as "koha".
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Test plan, all tests and QA script pass.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
There were some missing zebra language options in the man page for koha-create.
Trivial string change.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested using the following commands:
$ xsltproc /usr/share/xml/docbook/stylesheet/docbook-xsl/manpages/docbook.xsl \
debian/docs/koha-list.xml
$ man -l koha-list.8
Also:
prove -v xt/verify-debian-docbook.t
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Fixed the path to __ZEBRA_BIBLIOS_CFG__ for <server id="mergeserver">
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Good catach drojf.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes the koha-create script install the file zebra-biblios-dom.cfg
with the proper string substitutions inside on the new instance koha-conf.xml file.
It also adds two option switches that control the indexing mode for the instance:
--biblio-idx {dom|grs1}
--auth-idx {dom|grs1}
DOM indexing is set as the default for both authorities and bibliographic records.
Following drojf (thanks!) advice I arranged stuff like explained here:
http://wiki.koha-community.org/wiki/Switching_to_dom_indexing
To test:
- Apply the patch
- Build your own packages and install them on a test server
a) Create a new instance without using the new switches like:
$ koha-create --create-db domtest
- Check there's a file /etc/koha/sites/domtest/zebra-biblios-dom.cfg
- Check that /etc/koha/sites/domtest/koha-conf.xml points to:
* zebra-biblios-dom.cfg (biblioserver section)
* zebra-biblios-dom.cfg (publicserver section)
* zebra-authorities-dom.cfg (authorityserver section)
- Success means the new default is DOM
b) Play with the 4 possible combination of option switches
$ koha-create --create-db --auth-idx grs1 --biblio-idx grs1 domtest
$ koha-create --create-db --auth-idx grs1 --biblio-idx dom domtest
$ koha-create --create-db --auth-idx dom --biblio-idx grs1 domtest
$ koha-create --create-db --auth-idx dom --biblio-idx dom domtest
- Check the koha-conf.xml file reflects the chosen options.
c) Run
$ koha-create --help
- It should advertise this addition accordingly.
d) Run
$ man koha-create
- Man page for koha-create should provide good information on the new switches behaviour
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes Makefile.PL put the history.txt file in the right places
depending on the chosen setup layout, adds a reference to that place in
koha-conf.xml (and debian template version), and finally tweaks about.pl to
use it.
To test, apply the patch and verify that perl Makefile.PL runs fine, and
installing in
- dev
- single
- standard
layouts works as expected. Then go to the about.pl page and see if Koha's
history shows there.
Then, build your packages and test on your newly created instances.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This adds caching directives to the static resources so that the browser
doesn't ask about them all the time.
By default, Debian apache doesn't have the required module (mod_expires)
enabled, and so this patch will have no effect. In order to enable this
function, run:
a2enmod expires
and restart apache.
Test Plan:
* Using firebug or equivalent, load a page.
* Note that none of the images, css, or js files have a Cache-Control or
Expires header set.
* Add this patch, redeploy the package with it (or overwrite the
apache-share.conf file) enable the 'expires' module, restart apache.
* Force-reload the page
* Note that the images, css, js now have Cache-Control and Expires set
for 12 hours into the future.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch add the option to choose 'ru' and 'uk' during install for Zebra.
Should work for a tarball install, and make 'ru' and 'uk' available for using
with koha-create too.
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Reran Makefile.pl and made sure the language options show up now.
Patch extends existing language code lists addings nb, ru and uk
where missing.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch provides a definition file for Spanish (es) character
sorting in Zebra. It is based on the ideas from Hugo Agud <hagud@orex.es>
and Pablo Bianchi <pablo.bianchi@gmail.com>.
Makefile.PL is fixed to notice the existence of the 'es' language. The
docs for koha-create are touched too.
To test:
Tarball
=======
- Go through the install process, choosing 'es' for the Zebra's language step
- Koha should work as usual.
- Running this should show the lang definition is properly set.
$ grep -R "lang_defs/es" /etc/koha/*
(stuff like zebradb/zebra-biblios-dom.cfg:profilePath:...etc/koha/zebra/lang_defs/es... should show)
- This file should be present:
/etc/koha/zebradb/lang_defs/es/sort-string-utf.chr
Packages
========
- Build your own package, it shouldn't break the packaging
- Try the new package, using koha-create to set an instance using --lang 'es'
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The first patch on this bug forgot to add the new -q option to
koha-rebuild-zebra to the man page for that command. This patch
fixes it.
To test, run something like these commands:
$ xsltproc /usr/share/xml/docbook/stylesheet/docbook-xsl/manpages/docbook.xsl \
debian/docs/koha-rebuild-zebra.xml
$ man -l koha-rebuild-zebra.8
This should display the man page. (Remember to remove koha-rebuild-zebra.8
when you are done :-)
$ prove xt/verify-debian-docbook.t
All tests should pass.
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This adds a -q option to koha-rebuild-zebra that prevents it outputting
help if no instances are provided on the command line. This means that
if you've just installed the package, you won't get messages from cron
telling you how to use the script.
Test plan:
* install koha-common 3.12 or master onto a system with no enabled
instances.
* note that you or the sysadmin will start getting emails every 5
minutes.
* replace /etc/cron.d/koha-common and /usr/sbin/koha-rebuild-zebra with
the versions from this patch.
* note that the emails stop flowing.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
"sudo koha-rebuild-zebra -q" gives no output, as expected.
Followed the test plan, all looks good.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
1) koha-create: fill in __PLUGINS_DIR__
2) koha-create-dirs: create the directory, set permissions (writeable by the koha user)
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This updates the control file to use tinymce rather than tinymce2, as
tinymce2 is deprecated and no longer in Debian.
Also a general dependencies update. Note that this is suitable for
master only.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Commented out the code that checks for intance name parameters on the zebra service handling scripts.
It restores the original behaviour, while leaving error checking code.
Regards
To+
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch adds that (--disabled) option switch, Also revisits some of the code and docs.
To test:
- Apply the patch and create new packages (you might just drop the koha-list command somewhere)
- Create several instances (koha-create)
- Randomly set some as disabled, others enabled and enable email on some.
- Test all possible option switches combinations
Expected results:
- koha-list should abort with a proper message if mutually exclusive options selected (--email vs. --noemail, --enabled vs. --disabled)
- koha-list should show the exact instances you asked for
Regards
To+
P.S.: I wanted to add the --disabled option switch for the tab-completion work I'm doing, but as of bug 4876 I thought it would be ok to revisit the script to make it robust and clear.
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Does what it says, and cleans up the script at the same time.
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
koha-stop-zebra now
- Checks the instance exists.
- Checks the instance is enabled.
- Checks if the zebra daemon is already running.
Regards
To+
Edit: Corrected the die message
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
koha-email-enable now
- Checks the instance exists.
- Checks if email is already enabled.
Regards
To+
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
This patch makes koha-rebuild-zebra:
- Check for the existence of the instance
- Handle arbitrary amount of instance parameters
- Capture -a and -b (which made the script rebuild twice the chosen DB). It adds the extended version (--authorities and --biblios respectively) of the option switch. This makes the -a and -b switches work as "only do authorities" (or viceversa). They can be used concurrently, which is the default behaviour when no switch is provided.
- Handle -v (and --verbose) as koha-rebuild-zebra options, to ease the use for non-techie users.
- The rebuild_zebra.pl is wrapped inside an IF to return error values if we ever make rebuild_zebra.pl return error codes (this is pointed in the code).
- Added -h/--help switches and an 'usage' output :-D Please provide patches for any wording issues, or contact me to fix it.
To test:
- Apply the patch and create your packages (or just use the script from your branch)
- Run it in this scenarios / options
- -h/--help to see the available option switches
- Mix them with one or more instances, of which some could be fake
- try -a/--authorities and -b/--biblios in all possible combinations
- try -v/--verbose works
Regards
To+
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Robin Sheat <robin@catalyst.net.nz>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Bug 9052 fixed this for prog, CCSR was left aline in the dark (it's friday).
Regards
To+
Sponsored-by: Universidad Nacional de Cordoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Worked fine in my test package, good work Tomas
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
koha-email-disable now
- Checks the instance exists.
- Checks if email is already disabled.
Regards
To+
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
