- $data{'userid'} = Generate_Userid($data{'borrowernumber'},
$data{'firstname'}, $data{'surname'}) if $data{'userid'} eq '';
+ $data{'userid'} = Generate_Userid( $data{'borrowernumber'},
$data{'firstname'}, $data{'surname'} )
+ if ( $data{'userid'} eq '' || Check_Userid( $data{'userid'} ) );
Check_Userid returns 1 if it is unique. So this means unique userids
will always be discarded and new ones created.
This is why all the tests depending on a userid are now failing
To test
1/ run perl t/db_dependent/Serials_2.t
2/ Notice lots of tests fail
3/ OR Add a borrower with a userid set, notice the userid is ignored
and one is generated instead
4/ Apply patch
5/ Add a new borrower, notice the userid sticks (if it is unique)
6/ Run perl t/db_dependent/Serials_2.t notice tests pass
7/ Run perl t/db_dependent/Members.t notice tests still pass
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The SIP config has allowed you to specify an interface ip as
part of the listeners/service/port attributei
e. g. as port="127.0.0.1:6001/tcp"
with IPv6 the equivalent would normally be
as port="[::1]:5001/tcp"
However in this case incoming connections will get rejected because
Configuration constructs a string without the brackets
This patch makes tests both formats on incoming connections so that
they are accepted as they were previously
In future the best course is not to include a port identifier in the
port definition then if the server has ipv6 it will bind to all
interfaces and accept both IPv4 and IPv6 traffic
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This small patch adds a check on the SIP2 socket connection if it is
IPv6 and resolves socket address accordingly.
Any newer Debian distro would probably default to IPv6 so it would
eventually affect all SIP servers.
Tests against running SIP server on an IPv6 box:
http://wiki.koha-community.org/wiki/Koha_SIP2_server_setup#Testing_with_Telnet
before patch:
disconnects immediately. Log output:
Bad arg length for Socket::unpack_sockaddr_in, length is 28, should be 16
after patch:
operates normally
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The OpenLibrary JavaScript includes an untranslated string, "Preview."
This patch move the string to the template so that it can be translated.
To test, apply the patch and test that the translator picks up the
string:
1. From misc/translator run 'perl translate update [lang]' (e.g. de-DE)
2. Edit misc/translator/po/[lang]-opac-bootstrap.po and add a
translation for the updated "Preview" string
3. Remove the "#, fuzzy" marker from that entry
4. From misc/translator run 'perl translate install [lang]'
5. Enable the [lang] translation for the OPAC in system preferences
6. Enable the OpenLibraryCovers system preference.
7. In the OPAC switch to the [lang] translation.
7. View the detail page for a title for which there is an OpenLibrary
cover image. Below it you should see a preview link with the
translated string you added in step 2.
Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
A tiny typo made in runreport.pl when updating it for bug 9530 lead to
no body being attached to html emails.
Signed-off-by: Chris <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
One day late patrons were restricted even with dropbox mode activated
1) Check in the calendar (Tools/Calendar), that the
previous days you are about to use as date due are
really entered as opening day (never know).
2) Add a suspension in the suspension days parameter
of the circulation rules (Administration/Circulation
and fine rules) to the MOST specific category of
borrower and MOST specific type of document among the
existing rules of the LOGGED IN Site(cf explications
in the circ-rules page).
3) Choose a borrower using the search by category and an
item through the advanced search using the limit by type.
4) Checkout the item selecting the previous opening date
in the Specify-due-date box.
5) Click on Circulation in the upper menu, then on Checkin
and check the Book drop mode. The Book drop date showed
should be the previous opening date.
6) Check in the item : you can see that the patron is restricted
7) apply the patch
8) Redo 1 to 5 : Now, you can see that the patron is not restricted.
9) If you redo the test with two day late, you will see that
the patron is not restricted : that's ok because his
restriction of one day is already finished.
10) If you redo the test with more than two day late, you see
that the patron restriction is, as expected, one day shorter
than it were if the item had been returned without dropbox mode.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 9811 removes useful code.
Actually the AddPatronLists pref is not sent to the template from
members/member.pl.
To fix this issue, we can use the existing not clean way, or compare the
syspref value directly in the template. This second solution is
implemented in this patch.
Test plan:
1/ Set the AddPatronLists pref to 'specific'
2/ On the patron home page (members/members-home/pl), the patron search
result page (members/member.pl after launching a search) and on the
checkouts page/patron search result (circ/circulation.pl after searching
a patron using the check out), verify that the patron category list is
the specific ones.
3/ Test there are no regression with the AddPatronLists pref set to
'general'.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Works as described and fixes the problem.
Note: I am not sure if AddPatronLists makes sense -
if you set it to general patron types, it still preselects the
wrong category type (tried organization, a child patron category
was selected). Also the name is confusiong nowadays with the
Patron list feature.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The RoutingSerials preference controls if the routing
list related functionality is visible in the serials
module.
To test:
- Go to the system preference editor - RoutingSerials
- Check the current description
- Apply patch
- Check the new description
- Verify functionality matches description
NOTE: The preference change is merely cosmetic. The value is
still YesNo. A few git reset --hard origin/master
and page refreshes confirmed expected values.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If opacthemes is not defined updatedatabase reports the
subsequent warnings as an error. Take account of the case where
it is not set and default that to bootstrap.
This is probably a rare occurence, but should be handled
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test Plan ( using sample data included with Koha )
1) Catalog a record and item with the title "Oh no! or, (How my
science project destroyed the world) /"
2) Edit the DEFAULT template
a) Set layout type to Biblio
b) Set data fields to "title, author, isbn, issn, itemtype,
barcode, itemcallnumber"
c) Set font size to 10
3) Create a batch with just the one item you created
4) Export the PDF with the Avery template and the DEFAULT layout
5) Note the weirdness
6) Apply this patch
7) Re-export the PDF, note it's no longer weird ; )
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch enable translation of labels on itemsearch.tt
To test:
1) Translate for a fairly complete language (es-ES de-DE)
2) On staff, go to Search > Item search
3) Check there are many untranslated strings
e.g. Text before pulldowns on first and second box
All options on third box
4) Apply the patch
5) Repeat 1 & 2
6) Check there are now some strings translated
7) Update translation file, check there are some
new strings to translate (may be they are fuzzy)
e.g. "All statuses", "All collection codes"
Patch works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch only fixes the KW order.
Test plan:
1/ Choose/create a record with several 6XX (for KW), see the code source
to know which fields you can use
2/ Export this record in RIS format
3/ Verify that the KW lines are ordered following the marc record fields
order.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
We really should refactor this whole thing into Koha::RIS sometime, it's
a horrible module at the moment.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
By adding quotes 3 and 25 from the sample data, this test can
pass without having the sample quote data loaded.
TEST PLAN
---------
1) Ensure there is no quote id=3 or that it is NOT
Abraham Lincoln.
2) prove t/db_dependent/Koha.t
-- this should fail the daily quote test.
3) apply patch
4) prove t/db_dependent/Koha.t
-- this should *NOT* fail the daily quote test.
5) run koha qa test tools
Followed test plan 1)-4). Without patch, daily quote test failed. With patch, test passed OK.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Works as described, leaves actual data unchanged.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Check_Userid assumes that a borrowernumber will always be passed in
and thus fails to to return 0 for an already used userid when creating
a new patron.
Unit tests must now also me modified to no longer assume it is possible
to create multiple patrons with the same userid.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The Koha 3.0 patron admin page will prevent you from creating a user who
has an identical OPAC login as someone else (though I would change the
error message from "Login/password already exists." to "Login
already exists.", since it's not the password that's the
problem).
However, there's nothing enforced in the MySQL database to prevent
patrons from being imported or manually inserted with duplicate logins.
Would it be better to change the MySQL spec from this:
KEY `userid` (`userid`)
to this:
UNIQUE KEY `userid` (`userid`)
Test plan:
1) Enter mysql console
2) Attempt to create two borrowers with identical user id's
3) Note you are able to do so
4) Delete these bororwers
5) Apply this patch
6) Run updatedatabase.pl
7) Repeat step 2
8) Note you are now unable to do so
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Leaves deletedborrowers as it is, deleting patrons still works ok.
Works according to test plan.
Database update will only be successful, when no duplicate entries
exist in the database.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch updates the image replacement technique used for Koha's login
page. The old technique used a negative text-indent value to move the
text offscreen, but that begins to fail more and more often as screens
get larger.
The new technqiue is described here:
http://www.zeldman.com/2012/03/01/replacing-the-9999px-hack-new-image-replacement/
Note: This patch has not been tested in any Internet Explorer version!
To test you must have a screen which is wider than 2000 pixels. Apply
the patch, clear your browser cache and view the staff client login
page. The logo on the login form should look correct with no
corresponding text appearing anywhere on the screen.
Signed-off-by: Christopher Brannon <cbrannon@debian.localdomain>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To Test
1/ Craft a url like /cgi-bin/koha/catalogue/search.pl?q=smith&sort_by='"><script>prompt('Happy_Holidays')</script>
It is important it must return results and facets
2/ Notice the js is executed
3/ Apply the patch test again
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
No prompts, no functional regressions found.
Checked selecting and undoing facets, show more links and paging.
Signed-off-by: Mason James <mtj@kohaaloha.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Bug 12376 adds some padding to inputs.
This cause an overflow on the record detail page.
Test plan:
1/ Go on a record detail page with items
2/ Enable filters
Without the patch, the inputs overflow, with the patch it should be
corrected (as before bug 12376).
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Typed by Kahurangi, supervised by me
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Tested according to test plan, passes tests and QA script.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
It appears that some librarians will attempt to scan items as fast as
they can without checking to make sure the checkout was submitted and
the page reloaded properly. This can cause multiple barcodes to be
scanned into the barcode field if the person is fast enough.
This causes the checkout of both ( or more! ) items to fail.
Test Plan:
1) Apply this patch
2) Attempt to scan two or more items into the barcode field
You can emulate this with a keybaord by hitting a few keys, then
enter, then a few more keys, then enter again. The barcodes don't
need to be valid for this test.
3) Note the dialog stating the barcode has been submitted and to please
wait.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
However, this is an unreasonable assumption for a system which
is in use (either lots of testing or production).
TEST PLAN
---------
1) Have a supplier with a late subscription.
2) prove t/db_dependent/Serials/Claims.t
-- will fail
3) apply patch
4) prove t/db_dependent/Serials/Claims.t
-- success
5) run koha qa test tools
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
And not with "__ANY__"
Test plan:
0/ Don't apply this patch
1/ Create a suggestion for "any library"
2/ Verify suggestions.branchcode contain "__ANY__"
3/ Apply this patch and execute the updatedb entry
4/ Create a suggestion for "any library"
5/ Verify suggestions.branchcode contain "" (for both suggestions).
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This items form is broken since the upgrade to DataTables 1.10.2 (commit
954c2874d0).
The fnServerParams does not work anymore.
Test plan:
Go on catalogue/itemsearch.pl, launch a search and verify the data are
correctly displayed in the table.
Followed test plan. Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
The paging seems still a bit buggy, but this makes the
feature usable again!
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
- Check RentalFeesCheckoutConfirmation is activated
- Try to check out an item without rental fine
- Verify confirmation message without explanation
is shown
- Apply patch
- Verify confirmation message is no longer shown
- Configure itemtype to have rental fee
- Veirfy now the confirmation message appears as
it should
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Added options:
- research
- private
- society or association
- corporate
- government
- religious organization
- subscription
- school
Also changed 'university' to 'academic'
To test:
1) Go on to Global System Preferences and find UsageStatsLibraryType under Administration
2) Click drop-down menu and see all new options described above, as well as 'academic' instead of 'university'
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch: replace tab with spaces
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The Unapi path to XSLTs is wrong in the OPAC.
Unfortunately, it's coded to work just for Git installs, which makes it
tough to test.
_TEST PLAN_
Before applying:
1) Go to
http://GIT-INSTALL/cgi-bin/koha/unapi?id=koha:biblionumber:1&format=oai_dc
2) If the biblionumber exists, it should show you the record in OAI_DC format.
3) Go to
http://REGULAR-INSTALL/cgi-bin/koha/unapi?id=koha:biblionumber:1&format=oai_dc
4) You should get a software error
Apply the patch.
After applying:
1) Refresh the page for
http://yourgitinstall/cgi-bin/koha/unapi?id=koha:biblionumber:1&format=oai_dc
2) It should work exactly the same as before.
Thorough testers:
1) Push the code to that regular test install
2) Try the link again. It will properly show the converted record now.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Verified that single install
intrahtdocs==/usr/share/koha/clone1712/intranet/htdocs/intranet-tmpl plus
"/prog/en/xslt/" is the location for the required xslt files.
Script unapi in git install is still fine.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The link back to the basket when creating an order by
searching for an existing record in the catalog is
broken.
To test:
- Start a new basket
- Create a new order line by searching for an existing
record in your catalog
- Try the link back to the basket from the breadcrumbs
at the result list page
- Verify that the link is broken
- Apply patch and retest
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test:
Set syspref SelfCheckReceiptPrompt to "Show"
Select non English language
Go to Self Checkout and check out an item
Hit "Finish"
Make sure that confirm dialog "Would you like to print a receipt" still
appears
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Instead of a space in the leader on this position, it should be an a.
Test plan:
1) Log in to staff client
2) Find a record in the catalog
3) Edit the record
4) Click the on builder popup icon.
5) View the page source
-- the option is " " for the 'a- Increase in encoding level'
entry. It really should be 'a'.
6) Apply patch.
7) Repeat steps 1-5
-- the option should be 'a' this time.
8) Run koha qa test tools.
-- Discovered it failed. Provided a patch to fix this.
It does, however, solve the major problem of ' ' vs. 'a'.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Test scenario:
1. ensure that extended patron attributes are turned on in system preferences
2. find borrower which has fine to pay, and click on pay button
3. verify application error
4. apply patch and verify that application error is gone
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
I would prefer not to hide this "stuff".
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When using a z3950 connexion with UNIMARC authorities, you get an error :
Unsupported UNIMARC character encoding [ ] for XML output for UNIMARCAUTH; 100$a -> 20141119
I've seen thant Bug 2060 when adds authorities import adds a special behavior for UNIMARC : marc flavor must be UNIMARCAUTH instead of just UNIMARC.
This patch adds the same behavior when using z3950 connexion and import.
Test plan :
- Use a UNIMARC install
- Define a z3950 connexion for UNIMARC authorities
- Go to Authorities module
- Click on "New from Z39.50"
- Perform a search
=> Without patch : you get the error
=> With patch : you get results
- Import one result
=> You get the authoritie creation form with all datas
You may check same plan with MARC21 install
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
NOTE: depending on the target, the syntax in the configuration
might not be UNIMARC, but MARC21/USMARC instead!
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This is introduced by Bug 12874.
Without this patch, it's not possible to clear (set to an empty string)
an item field.
This appended for field linked to an AV list but even if it's not.
The regex tried to prefix 'my_field' with 'items.' to have
'items.my_field'. It wanted to take care of the case where the prefix
already exists (Actually only 1: 'items.cn_source').
The regex is changed to: "add the prefix only if the string does not
contain a dot".
Moreover an ambiguity existed on the prefix: in marc_subfield_structure,
the kohafield is prefixed, but not in the key of the hash sent to
ModItemFromMarc.
Test plan:
- edit an item, set a status that is controlled by an authorized value
examples tested: damaged, not for loan
- check the status saved correctly
- edit the item again, reset the status to empty
- check the status saved correctly
- edit the item again, reset fields, edit fields
- check the fields saved correctly
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Most of the page contents have fixed size. The only exception is the
targets list. If the target list grows, then the whole page needs to be scrolled
in order to reach the buttons.
We should make the z3950 targets area scrollable, and remove scrolbars from all
over the place.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Changes:
* Two columns of search fields into one
* moves targets from below search fields to the right of them
To test:
* Create a basket in acquisitions
* attempt to add a record to the order from an external source
* note the changes to the layout
* complete a couple of additions to the basket - functionality should be unchanged.
If you like the changes, sign off :)
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Ok. Consistency welcomed!
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch rearranges the layout of the z39.50 search pages in cataloguing and
authorities. There should be no functional change to z-target searching, all
functions should remain the same.
Changes:
* 2 columns of search fields condensed into one
* zTargets moved from below the search fields to beside them
* rearranged search fields into perceived frequency of usage, from most used to
least
* changed label of Raw (any) to Keyword (any)
To test:
* click cataloguing -> new from z39.50/SRU
* observe how the layout has changed
* import a record or two using the search - there has been no change to the
function, it should all be working.
* Click Authorities -> new from z39.50
* observe how the layout has changed
* import an authority or two using the search - there has been no change to the
function, it should all be working.
* sign off if you think these changes are nice. Comments and suggestions are
also welcome regarding this change.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Nice evolution of the z3950 search/result pages.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
For reasons unknown, the table of contents data from Syndetics will not
display if there is no p element, even though within that if for the p
element there's a second one for the p element! This is neither good nor
necessary.
Test Plan:
1) Enable Syndetics
2) Find a record that should have a Syndetics TOC but doesn't
3) Apply this patch
4) Reload the page
5) Note the Syndetics TOC data now displays
Signed-off-by: Julius Fleschner <julius.fleschner@briarcliff.edu>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I couldn't test but from reading the code this should not
have any negative consequences.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch makes the string "Are you sure you want to delete this
authority?" translatable using the function _(...)
To test, apply patch and check that deleting authorities still works.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Tested successfully with the following procedure:
1. Applied the patch.
2. Ran perl translate update de-DE
3. Edited de-DE-i-staff-t-prog-v-3006000.po to add a "translation"
4. Removed "#, fuzzy" marker from po entry.
5. perl translate -v install de-DE
6. Testing deleting an authority from the authority search results page
and from the detail page. My translated string appeared correctly.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
If items are created for a serial subscription, the issue
information is shown on the details page in staff with the
planned date in ().
To test:
1) Create a subscription with items added on receive
2) Receive a few issues and create items
3) Check the staff detail page
4) Verify that the published date shows under Publication details
in the items table, but that the date is not formatted
5) Apply patch
6) Verify the date is now formatted according to the DateFormat
system preference setting
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To avoir further issue, it's better to explicitely list the fields we
want to retrieve.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch moves the publisher information out of its own
always empty column into the Summary column below the title,
as it is on other acq pages.
The information was never displaying, as publishercode is in
biblioitems and that table was not selected by GetInvoiceDetails.
Also modified the code to take into account that UNIMARC uses
biblioitems.publicationyear and MARC21/NORMARC use bibio.copyrightdate
for the copyright year.
To test:
- create an invoice for records that
- have a publication year
- have no publication year
- have a publisher...
- 'finish receiving' and check the invoice summary page
...acqui/invoice.pl?invoiceid=?
- Make sure all the information displays now but didn't witout the patch.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
