Test plan:
Go go the plugin admin page
upload a plugin
Notice that the "Actions" column is not longuer sortable
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch implements the code to allow a patron to receive multiple
orders at the same time in /cgi-bin/koha/acqui/orderreceive.pl page
To test:
1. apply all patches
2. updatedatabase
3. Go to system preferences and allow AcqReceiveMultipleOrderLines
4. In acquisitions module, create a vendor if you don't have one and add
3 baskets.. one with create items on ordering, one with create items
on receiving and finally one with create items when cataloguing
5. Fill baskets with orders (There should be at least 15 orders in total). There should be a mix of orders created by suggestions, others by subscriptions and others by neither of those methods.
6. Close all baskets and receive shipment.
CHECK => in /cgi-bin/koha/acqui/parcel.pl page, in top table there is a column with checkboxes, and a button that says "Receive selected"
7. If all orders from all baskets are shown in the table, set the rows per page to 10, so table has more than one page
8. Check some of the checkboxes
CHECK => "Receive selected" button shows how many rows are selected
9. Go to the next page and select some more rows
CHECK => Changing page does not modify how many rows where selected
10. Go back to previous page
CHECK => Previously selected rows are still selected
11. Reload the page to deselect all rows
12. Select only one row and click on "Receive selected" button
CHECK => the page /cgi-bin/koha/acqui/orderreceive.pl behaves just the same as if the "receive" link in the selected row would have been clicked.
13. Click on cancel to go back to parcel.pl page
14. Select all rows (even the ones from the next page of the table) and
click on "Receive selected"
CHECH => In orderreceive.pl page there is a table with all selected rows
15. Ensure table has more than one page, as in step 7
16. Click on the "edit" link in the last row of the current page
CHECK => A modal window is displayed with 4 tabs within: Info,
Accounting, Receipt history and Items
CHECK => Modal has 4 buttons at the bottom, 'Previous' to go to previos
order, 'Cancel' to close the modal without keeping modifications, 'Save'
to close modal keeping modifications and 'Next' to go to the next order
CHECK => Even that we are at the end of the current page, 'Next' button
is still available
17. Click on 'Next' button
CHECK => The table behind the modal now displays the next page, and the modal was not closed
18. Click on 'Previous'
CHECK => The table behind the modal went back to the first page, and the modal was not closed
19. Click on 'Previous' button till you reach the first row of the first
page
CHECK => Only when you reach the first row of the first page 'Previous'
button gets disabled
20. Click on 'Next' button till you reach the last row of the last page
CHECK => Only when you reach the last button of the last page 'Next'
button gets disabled
21. Check that behaviour for the different types of order are still the
same
a. For orders that where created through suggestion, check that the
suggestion info is present in Info tab. If when suggestion was accepted
you set a reason, a dropdown to change the reason shoul display also.
b. For orders that where created through subscriptions, check that
the Items tab is disabled, and the Receipt history is enabled. On
accounting tab you should be able to change quantity ordered. If there
were less items received than ordered, the next time you receive this
order the child order generated from this one shoul appear in receipt
history.
c. For orders that don't come from subscription and creates there items on ordering, Receipt history
should be disabled, and a table with prefilled items shold appear in the
Items tab. You can edit them and the changes should appear in the item's
row.
d. For orders that don't come from subscription and creates there
items on receiving, Receipt history should be disabled, and a form to
create the items should appear in Items tab. When you add an item a
table should appear.
e. For orders that don't come from subscription and creates there
ites on cataloguing, Receipt history and Items tabs should be disabled.
f. Any changes made in quantity (received or ordered) or funds in the modal should be
reflected in the table if you click save from the modal.
22. Once you've done all you checking and verifications click save
23. While saving a progress bar should appear
24. If no error was detected, you should be redirected back to parcel.pl
page
25. If an error or warning was detected (like there is an order with 0
items to receive) the save button should be disabled and warnings
are dispayed.
26. prove t/db_dependent/Koha/Acquisition/Fund.t t/db_dependent/Koha/Acquisitoin/Order.t t/db_dependent/Koha/Item.t
Sponsored-by: Virginia Polytechnic Institute and State University
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We removed the 'scoped' attribute and so the style rules added in the
previous patch were applied to the agreement list view.
Why is 'scoped' not working is the main question here (?) but adding a
more specific selector to aim only the component (AgreementsList) from
the modal is a quick solution.
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Bug 33491: Add a more specific class for the modal
We don't want to apply these CSS rules to other modals
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Just send the codes and descriptions only to client.
Adding a few comments to the reduce construction.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The "MARC overlay rules" page doesn't display or work correctly
if a patron category code contains a "-".
This happens because of the JavaScript function in
"marc-overlay-rules.tt" line 469. This causes an error
"Uncaught SyntaxError: missing : after property id".
Test plan:
1. Go to Administration > Patron categories.
2. Make sure you don't have a patron category code that contains
a "-".
3. Go to Administration > Record overlay rules.
4. The table should display correctly, and you can add, edit
and delete rules.
5. Return to Patron categories.
6. Add a new patron category with a "-" in the patron category code.
7. Return to Record overlay rules page:
=> The page doesn't display and load correctly (see the attached
image) - the normal DataTables header and footer aren't
displayed, and you can't add, edit or delete overlay rules.
=> If you turn on web developer tools, an error is displayed in the
console: "Uncaught SyntaxError: missing : after property id".
8. Apply the patch.
9. Repeat the step 7, the Record overlay rules page should now
display correctly and you should be able to add, edit and
delete rules.
10. Sign off.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1) Run the following test and make sure all pass:
t/db_dependent/api/v1/biblios.t
t/db_dependent/api/v1/checkouts.t
t/db_dependent/api/v1/return_claims.t
t/db_dependent/Circulation/CalcDateDue.t
t/db_dependent/Circulation/CheckIfIssuedToPatron.t
t/db_dependent/Circulation/dateexpiry.t
t/db_dependent/Circulation/GetPendingOnSiteCheckouts.t
t/db_dependent/Circulation/GetTopIssues.t
t/db_dependent/Circulation_holdsqueue.t
t/db_dependent/Circulation/IsItemIssued.t
t/db_dependent/Circulation/issue.t
t/db_dependent/Circulation/MarkIssueReturned.t
t/db_dependent/Circulation/maxsuspensiondays.t
t/db_dependent/Circulation/ReturnClaims.t
t/db_dependent/Circulation/Returns.t
t/db_dependent/Circulation/SwitchOnSiteCheckouts.t
t/db_dependent/Circulation.t
t/db_dependent/Circulation/TooMany.t
t/db_dependent/Circulation/transferbook.t
t/db_dependent/DecreaseLoanHighHolds.t
t/db_dependent/Holds/DisallowHoldIfItemsAvailable.t
t/db_dependent/HoldsQueue.t
t/db_dependent/Holds/RevertWaitingStatus.t
t/db_dependent/Illrequests.t
t/db_dependent/ILSDI_Services.t
t/db_dependent/Items.t
t/db_dependent/Koha/Account/Line.t
t/db_dependent/Koha/Acquisition/Order.t
t/db_dependent/Koha/Biblio.t
t/db_dependent/Koha/Holds.t
t/db_dependent/Koha/Items.t
t/db_dependent/Koha/Item.t
t/db_dependent/Koha/Object.t
t/db_dependent/Koha/Patrons.t
t/db_dependent/Koha/Plugins/Circulation_hooks.t
t/db_dependent/Koha/Pseudonymization.t
t/db_dependent/Koha/Recalls.t
t/db_dependent/Koha/Recall.t
t/db_dependent/Koha/Template/Plugin/CirculationRules.t
t/db_dependent/Letters/TemplateToolkit.t
t/db_dependent/Members/GetAllIssues.t
t/db_dependent/Members/IssueSlip.t
t/db_dependent/Patron/Borrower_Discharge.t
t/db_dependent/Patron/Borrower_PrevCheckout.t
t/db_dependent/Reserves/GetReserveFee.t
t/db_dependent/Reserves.t
t/db_dependent/rollingloans.t
t/db_dependent/selenium/regressions.t
t/db_dependent/SIP/ILS.t
t/db_dependent/Holds.t
t/db_dependent/Holds/LocalHoldsPriority.t
t/db_dependent/Holds/HoldFulfillmentPolicy.t
t/db_dependent/Holds/HoldItemtypeLimit.t
t/db_dependent/Circulation/transferbook.t
2) Performe one or more checkouts for a patron, making sure
that the circulation rules allows for renewals (for example by
setting an earlier due-date).
3) Log in as this patron in OPAC and make sure the list of
checkouts is displayed correctly, and that renewing an issue
still works.
Sponsored-by: Gothenburg University Library
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This is Julian's patch with some extra cleanup to reduce repeated code
If AllowHoldPolicyOverride is enabled and only some pickup locations are
available, you still have the possibility to force one of the others
pickup locations.
But when there are zero pickup locations available, that is not
possible.
This patch change that by always displaying the list of pickup locations
when AllowHoldPolicyOverride is enabled.
Test plan:
1. Apply patch
2. Disable AllowHoldPolicyOverride
3. Create a biblio B with an item I at library A.
4. Configure this library A to not be a pickup location
5. Add a "Default holds policy by item type" for item I type where "Hold
pickup library match" is "item's home library"
6. Try to place a hold on biblio B
You should not be able to place a hold because there is no valid
pickup locations
7. Enable AllowHoldPolicyOverride
8. Try to place a hold on biblio B
You should now see all valid pickup locations in a dropdown list
(with an exclamation mark in front of each option) with none selected
by default
9. Verify you can place a title-level hold and an item-level hold
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Right now the holds queue builder starts filling bib-level holds with
items whose patron's home library matches the item's home library.
It would be good and reasonable to have the option to prioritize
item's whose patron's home library matches the item's holding library
to minimize transfers.
Signed-off-by: Andrew Fuerste-Henry <andrewfh@dubcolib.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test Plan:
1) Find record with at least 3 holds.
2) Change first holds priority as 2, Priority is changed to 3.
3) Try to change priority back to 1, Priority is changed to 2.
4) Apply this patch
5) Reload the page
2) Change first holds priority as 2, Priority is changed to 2.
3) Try to change priority back to 1, Priority is changed to 1.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi>
Signed-off-by: Hinemoea Viault <hinemoea.viault@inlibro.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
* Go to the OPAC, log into your account
* Make changes to your personal details and save
* Go to the staff interface and use the link on the start page to
moderate the change request
* At the top of the list you'll see something like:
Without this patch:
Ignore|Patron details
With this patch:
Ignore | Patron details
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We just figured out that multi-line TT comments show up
weirdly in translations and fixed it on bug 33332. So
this just follows the newly established pattern.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch begins reduing some of the extra things we are doing in
detail.pl that could easily be handled in the templates - fetching
authorised values and branches etc
It also removes a loop to find items that should be hidden, and instead
uses a searh parameter
The template changes either use item object rather than passed
variables, or utilize plugins to fetch authorised valued
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The previous syntax causes a warning during the execution of the translation script
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
examples: 'crayon'->'carchoal' or 'camaiu'->'cameo'
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch corrects the typo "presedence" with "precedence."
The patch also corrects some grammar:
"so if the 'library.com' domain will take presedence over
'*library.com'"
...changed to...
"so 'library.com' domain will take presedence over '*library.com'"
I also changed the <div>s inside that block of help text to <p> in order
to improve legibility.
To test, apply the patch and go to Administration -> Identity providers
-> Manage domains (on an existing provider) -> Edit, and click the
"More" button under the "Domain" field.
Confirm that the text is correct.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It should ease translatability and remove an extra space.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It seems the form didn't populate all fields form data passed in. This patch
corrects that
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We didn't include anything except the authid id in the try again form, this
patch extends to cover all the fields
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds an id to z39.50 search interface submit buttons so that
the JavaScript event for changing the cursor can be linked to that
instead of the obsolete class.
The patch also adds code copied from Bug 33233 in order to make the
"waiting" cursor revert to the default if the user uses the back button
to return to the search form.
To test, apply the patch and go to Cataloging -> New from Z39.50
- Fill in a search term and click the submit button
- Your cursor should change to a "waiting" cursor while the search is
performed, before you're redirected to the results.
- From the results page, clicking the back button (or right-clicking the
page and choosing "Back") should return you to the search form and
your cursor should be a standard pointer.
Perform the same test from:
- Acquisitions -> Vendor -> Basket -> Add to basket -> From an external
source
- Authorities -> New from Z39.50/SRU
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Disable UseControlNumber
Change biblio title to something like:
Hamlet or CHINESE_CHARS
where you add some nice Chinese chars.
Create a 765 looking for that title in another biblio record.
Without this patch, the link at detail page finds both records,
since it looks for ti-phr:Hamlet OR the Chinese chars.
With this patch, the link at detail uses quotes and finds only
one, since the OR is now part of the ti-phr search.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
** For OPAC
[1] Pick a biblio record A as original entry, fill $001/$003.
[2] Pick another biblio record B as translation, add 765 with $t,
$a and $d. Put (orgcode)cnum from A into $w.
[3] Disable UseControlNumber.
[4] Goto OPAC detail page of B. Check link; should be title based.
[5] Enable UseControlNumber.
[6] Goto OPAC detail page of B. Check link; should incl orgcode and cnum.
[7] Edit B. Replace $w with cnum of A only.
[8] Goto OPAC detail page of B. Check link; should incl cnum only.
** For staff client
[9] Goto staff detail page of B. Check link again.
[10] Edit B. Set 765 ind2 to 8, fill $i.
[11] Goto staff detail page of B. You should see different label.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Note for QA: Opened bug 33515 to see if we can use this same
function in a few other places too. Would probably reduce code
and increase consistency.
Test plan:
See next patch.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Date fields in BorrowerMandatoryField are not required by the validation
form when a new patron is added or modified.
This is because the 'required' prop does not exist on the input element
when the flatpickr instance is created.
We should either add it in the DOM directly (tt), but it will require to
do it "manually" for each date fields, or add it when we add it to the
inputs. This patch implements the second option.
Test plan:
1. Add "dateofbirth" to syspref BorrowerMandatoryField.
2. Add patron and leave date of birth input field empty.
3. Save.
=> Form is not submitted and you are asked to fill in a date of birth
Signed-off-by: Emmi Takkinen <emmi.takkinen@koha-suomi.fi>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
https://bugs.koha-community.org/show_bug.cgi?id=33648
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 30280 added the ability to use multiple thesauri for authorities in Koha.
This is a large change, and many libraries use authorities in a ess strict manner.
This patch simply adds a preference, disabled by default, to enable this new feature
To test:
1 - Find or create a record with a 650 heading, second indicator 0 (LOC)
2 - Ensure this links to an authority in your system
3 - Disable AutoCreateAuthorities, enable CatalogModuleRelink
4 - Edit the heading to second indicator 2
5 - Save, the heading does not link
6 - Apply patch, updatedatabase, restart all
7 - Edit and save record again
8 - Heading should now link to the LOC authority, despite different second indicator value for source
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a licenses option to the top searchbar
Test plan:
1) Apply patch
2) run yarn build
3) Navigate to the ERM module
4) Observe that the top search bar should have an option for licenses
5) Click on licenses in the left hand menu, the search bar should update to show licenses as the active search option
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1. Enable system preference ExportCircHistory
2. Create an item bundle (see bug 28854 comment 458)
3. Check out the item bundle
4. In the checkouts table, check the box in column "Export",
choose export format 'MARC with items', check "Export items bundle
contents" and click on "Export" button
The exported file should contain the biblio and item created at step
2, but also the biblio and items that are part of the bundle
Signed-off-by: Marie-Luce <marie-luce.laflamme@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marie-Luce <marie-luce.laflamme@inlibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
https://bugs.koha-community.org/show_bug.cgi?id=25508
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This adds the missing debit and credit types to the includes, namely:
DISCOUNT, PURCHASE, PAYOUT, and VOID.
I sorted them as they appear in the GUI (alphabetically) so it's a little
easier to spot missing ones.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the credit and debit types management pages to use
the proper includes for handling system type translations. This is how
it should have been done in the first place on the original bugs that
introduced the management of these types but for some reason I think it
got dropped during the QA process leading to confusion around these
system types with their fixed descriptions.
To test:
1. Apply patch
2. Apply the translations
./misc/translator/translate install xx-XX
3. In the staff interface, go to Administration > Credit types
--> They should be translated
4. Go to Administration > Debit types
--> They should be translated
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This is following recommendations from accessibility
guidelines. It being a link or button already indicates
that you need to click it. We don't need to spell it out.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Create a subscription
2. Make sure that you choose "Create an item record" when receiving the serial and associate it with a record.
3. Fill out the numbering pattern stuff and save the subscription.
4. Receive and change the status to arrived. Doing so will make the item subfields appear for editing.
5. Add some stuff, like a barcode, and Save.
6. Now, if you have made a mistake, you may want to edit the serial/item. Check the edit box and click 'Edit serials '
7. For your issue that has already arrived click 'Click to add item'. The item record from before appears.
8. Apply patch.
9. Try 6 & 7 again. The existing items should now read 'Click to edit item'
Signed-off-by: Andrew Auld <andrew.auld@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Have a patron with some checkout history.
2. Go to that patrons OPAC reading history page, notice author is listed in the same column as title. You cannot sort by author.
3. Apply patch and look again.
4. Now there should be an author column that allows patrons to sort by it.
Signed-off-by: Andrew Auld <andrew.auld@ptfs-europe.com>
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This updates the other occurrences and adds html_line_break to all
except the edit page - it seems html or raw doesn't affect the value of the textarea,
but moved to raw for consistency
To test:
1 - Add an HTML note to a patron, make sure to add a line break:
<h1>Testing</h1>
<h2>Newline</h2>
2 - Checkout to patron and return
3 - Confirm note shows correctly
4 - Add patron to a list
5 - Confirm note displays correctly
6 - Edit patron, confirm note field is correct
7 - Batch modify borrower
8 - Confirm note displays correctly in batch list
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This is a consistency patch: we already allow adding HTML tags
to the patron circulation note and the contents display
correctly in the patron account and in the patron search results
in the staff interface. But the HTML tags are printed on the
checkins page.
To test:
* Add a circulation note including HTML tags to a patron
Example: <h1>This patron is great!</h1>
* Check an item out to this patron
* Verify that the note displays formatted in patron search results
* Verify that the note displays formatted in the patron record
* Return the item
* Verify the note shows the printed tags
* Apply patch
* Check item out again and check it in again
* Verify the note now displays correctly in list of checkins
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The form for entering your authentication code shoudl not suggest
previous codes.
To test:
* Activate TwoFactorAuthentication
* Go to your patron account in staff
* More > Manage 2-factor authentication
* I used "Google authenticator" on my phone, so:
* Open app on your phone, add new and scan the QR code
* Enter activation code
* Log out of staff interface
* Log back in, you are now also asked for an authentication code
as second step
* Look up code in app, enter, get logged in
* Log out, log back in - the form now suggests the previous code
when you click on it
* Apply patch
* Reload things (restart_all on ktd)
* Verify that you no longer get the suggestion
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Patch 32555 tries to resolve the issue caused by bug 31313. But the way it is fixed seems to be
at least problematic. With patch 32555 we will never see the difference between
`serial`.`serialseq` and `items`.`enumchron` which is still intended in opac-detail.tt
(line ~ 1332) and [intranet] catalogue/detail.tt (line ~ 446). This is because
ITEM_RESULT.serialitem (in opac-detail.tt) and item.itemserial.serial (in catalogue/detail.tt)
refer to non-existing things. (and therefor the problem described in 32555 no longer emerge).
The original problem is caused by mixing up serialitem with serial in [opac-]detail.pl
and passing serialitem instead of serial to both templates.
To test:
1. Create a serial subscription
1.1. Go to Serials
1.2. Click on New subscription
1.3. Fill out the first form
- Vendor: leave empty
- Record: enter a record number
- Create an item record when receiving this serial
- When there is an irregular issue: Keep issue number
- Manual history: leave unchecked
- Call number: leave empty
- Library: Centerville
- Public/nonpublic note: leave empty
- Patron notification: None
- Location: None
- Collection: None
- Item type: Continuing resources
- Grace period: leave empty
- Number of issues to display: leave both empty
1.4. Click Next (and confirm you are not using a vendor)
1.5. Fill out the second form
- First issue publication date: 2023-01-01
- Frequency: 1/month
- Subscription length: issues 12
- Subscription start date: 2023-01-01
- Subscription end date: 2024-01-01
- Numbering pattern: Number
- Locale: leave empty
- Begins with: 42
- Inner counter: leave empty
1.6. Click Test prediction pattern
1.7. Click Save subscription
2. Click OPAC view: Open in new window.
3. Back in the staff interface tab, receive an issue
3.1. Click Receive
3.2. In Status, choose Arrived for No. 42
3.3. IN ITEM DETAILS BELOW CHANGE h - Serial enumeration / chronology
from No. 42 to some different string
3.3. Click Save
4. Check the items in OPAC and Intranet – you will see only the value from the
item $h subfield (enumchron) instead of desired "enumchron -- serialseq"
in case of a difference between `serial`.`serialseq` and `items`.`enumchron`.
5. Apply this patch
6. Repeat 4
7. Check the items in OPAC and Intranet – you should now see the desired
"enumchron -- serialseq" string.
8. Sign off
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Nick <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a check of the syspref 'EnbaleItemGroupHolds' to the
opac request form
To test:
1 - Enable 'EnableItemGroups' system preference
2 - On staff client, view a record details
3 - Go to 'Item groups' tab, add a enw group
4 - On holdings tab, select one or more items and add to group
5 - View record in OPAC
6 - PLace a hold
7 - Note group option is visible
8 - Apply patch
9 - Refresh, no group option
10 - Enable 'EnableItemGroupHolds' system preference
11 - Refresh opac page, note group option is visible
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
Create some checkouts in future and past, make sure to include
some with a time != 23:59.CirculateILL
Verify that the due date is displayed correctly on:
* Catalog detail page > Items tab > Checkout status
* Circulation start page > Renew > Renew one of your checkouts > dialog message
* ILL request page: requires ILL setup and CirculateILL system preference
* Patron acccount in staff > Print > Print summary
* Catalog detail page > Holds > search for patron > due date on checked out items
* Recalls:
* Activate UseRecalls system preference, set up circulation rules to allow recalls
* Checkout an item to another user
* In the OPAC, place a recall on that record with yor use
* Check "Recall a specific item"
* Verify due date in item list
* Place recall on checked out item
* Patron account in OPAC > Recalls history (due date might have been changed through recall)
* OPAC patron account > Summary > Overdue tab
* Self checkout:
* Activate WebBasedSelfCheck
* Go to <opacbaseurl>/cgi-bin/koha/sco/sco-main.pl
* Log in > Tab checkouts
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
JD amended patch - removed 'fda'
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Make some daily an hourly checkouts and confirm the right display
(hourly with hours and minutes, daily only date) of due date on these
places:
1) catalogue -> checkout history
2) circulation -> overdues with fines
3) <already fixed>
4) circulation -> pending on site checkouts
5) patrons circulation history
6) opac -> account summary -> relatives checkouts
Note: I suspect the moremember-receipt.tt template is not used anymore
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
These error message will show within the patron account. The goal
of this patch is to make them a little more user friendly avoiding
'patron' and 'hold group' terminology :)
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch changes opac-reserve.pl to return the error(s) when placing
a hold as a pipe delimited list which is then translated to a message for the
user
To test:
1 - Find a record with items available on the opac
2 - Click 'place hold' and set things up, but do not confirm
3 - In staff client, do something to make hold invalid:
- Make item damaged
- Make library not a pickup location
- Place other holds for patron up to limit
- etc.
4 - Confirm hold on OPAC
5 - You are sent to patron's account, hold is not placed
6 - There is little or no message to explain why
7 - Apply patch
8 - Repeat
9 - Now errors are clear
Signed-off-by: Andrew Auld <andrew.auld@ptfs-europe.com>
Signed-off-by: Michaela Sieber <michaela.sieber@kit.edu>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes a conflict between the template-generated markup and
Bootstrap JS which were both competing to show the correct default tab.
It's simpler to rely on JavaScript.
To test, apply the patch and enable the TranslateNotices system
preference if necessary.
- Go to Tools -> Notices & slips
- Go to edit any notice e.g. DUEDGST
- The page should load with the "Default" tab selected by default.
- Enter unique titles and contents under each tab to confirm that the
data you see under the "Default" or "English (en)" tab is being shown
in the right place.
- Save your modified notice and edit it again to confirm that the tabs
correspond correctly to your data.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When ordering catalog search by relevance from advanced search, this is not visible in sort order combobox in staff interface.
This is because sort by relevance is a special case not using sort
order.
This patch add a new method C4::Context->default_catalog_sort_by to use
in both staff interface and OPAC.
Test plan :
1.0) On staff interface
1.1) Define system preferences defaultSortField = 'relevance' and defaultSortOrder = 'descending'
1.2) Perform a catalog search from main page on any term, ie 'perl'
=> You see in sort combobox 'relevance' selected (with a check icon)
1.3) Perform an advanced search on any term, ie 'perl', with sort by relevance
=> Without patch : you see in sort combobox 'relevance' not selected (no check icon)
=> With patch : you see in sort combobox 'relevance' selected (with a check icon)
2.0) On OPAC
2.1) Define system preferences OPACdefaultSortField = 'relevance' and OPACdefaultSortOrder = 'descending'
2.2) Perform a catalog search from main page on any term, ie 'perl'
=> You see in sort combobox 'relevance' selected
3.0) Run prove t/Context.t
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Have an item with a replacement cost checked out to a patron
2. Set the ClaimReturnedChargeFee sys pref to "Ask if a lost fee should be charged"
3. Make a claim and check the box for charging.
4. Claim happens but no charge occurs.
5. Apply patch and try again.
6. A charge should now occur.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Hinemoea Viault <hinemoea.viault@inlibro.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When merging bib records the first tab (the source record) should have
all the checkboxes checked by default.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 32368 added whitespaces, remove them.
To test:
1 - Create a report like:
SELECT biblionumber FROM biblio
2 - Run it
3 - Try the various options from the 'Batch operations' button
4 - The operations don't find the biblios
5 - Create a report like:
SELECT cardnumber FROM borrowers
6 - Run it
7 - Test the batch operations
8 - They fail
9 - Apply patch
10 - Run each report again and test batch operations
11 - They work!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The Koha Community normally refers to "global system preferences"
as just "system preferences".
This updates the staff interface and other occurences to refelect
this, including:
- Administration > Global system preferences and the description
- Patrons > [a patron] > More > Set permissions > Manage Koha
system settings > Manage global system preferences
(manage_sysprefs)
- The installer files and the database (permissions table)
Test plan:
1. Note that in the staff interface "Global system preferences"
is dispalyed in two places:
1.1 Administration: Go to Administration. There is a section
called "Global system preferences" with a description
and a search box.
1.2 User permissions: View the details for a patron > More >
Set permissions > expand 'Manage Koha system settings' >
scroll down to 'Manage global system preferences
(manage_sysprefs)'
2. Apply the patch.
3. Update the database.
4. Revisit the pages in step 1 - these should now show as
"System prefereneces" or "system preferences" as appropriate.
5. Sign off!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Magnus Enger <magnus@libriotech.no>
I agree with this change, consistency is good. As far as I can see
this patch cathes all the occurrences of "global".
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
An alternate placement of the Mana KB hint on the reports start page.
To test:
* Go to Reports module
* Verify the hint shows when you haven't decided on Mana KB
* Once you set yes or no, it will no longer show
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes the unnecessary second definition of the JS function PopupMARCFieldDoc from addbiblio.tt.
To test:
1. Apply the patch
2. Check that addbiblio.tt contains only one function definition for PopupMARCFieldDoc
3. Navigate to "Cataloging" -> "Add MARC record"
4. Check that after clicking on the question mark symbol next to any MARC field, the loc description of that MARC field is opened in a new tab
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Go to the Administration > Budgets page
=> FAIL: Breadcrumbs show two little house icons
2. Apply this patch
3. Reload page
=> SUCCESS: Only one icon
4. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates several templates in the tools directory so that they
use the new WRAPPER for displaying breadcrumbs.
To test, apply the patch and test each page and its variations.
Breadcrumbs should look correct, and each link should be correct.
- Tools ->
- Tools home page
- Log viewer
- Search result
- Uploads
- Upload results
- Cataloging ->
- Upload local cover image
- Upload result
- Test uploading an biblio-level image from the bibliographic detail
page
- Test uploading an item-level image from the bibliograhpic detail
page's holdings table
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates several templates in the tools directory so that they
use the new WRAPPER for displaying breadcrumbs.
To test, apply the patch and test each page and its variations.
Breadcrumbs should look correct, and each link should be correct.
- Tools ->
- Task scheduler
- Cataloging ->
- Stage MARC records for import (use a batch of MARC records which
will match existing records)
- View batch ->
- View diff of records with a match
- Stock rotation (must have StockRotation enabled)
- New rota
- Edit rota
- Manage stages
- Manage items
Signed-off-by: Andrew Auld <andrew.auld@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This adds the white background. As we do on other pages I have
chosen to include the h2 heading within the page-section.
To test:
* Go to advanced search in staff interface
* Activate 'More options'
* Check checkbox for scan indexes
* Switch to author (especially when using Elasticsearch)
* Search for C
* On the result list verify there is no white background/page section
* Apply patch
* Repeat test - background should be present now
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Nicolas Giraud <nicolas.giraud@inlibro.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adjusts the ids in the submit function
To test:
1 - Browse to tools -> Batch patron modification
2 - Enter cardnumbers and submit
3 - No patrons
4 - Enter borrowernumbers and submit
5 - No patrons
6 - Apply patch
7 - Repeat
8 - Success, patrons are listed
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Go to OPAC advanced search and do a search using only one of the inputs.
2. Once the search is complete use the browser's back button to return to the advanced search.
3. Notice the unused inputs are disabled.
4. Apply patch and try again. Now the inputs should not be disabled.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates several templates in the tools directory so that they
use the new WRAPPER for displaying breadcrumbs.
To test, apply the patch and test each page and its variations.
Breadcrumbs should look correct, and each link should be correct.
- Tools ->
- Notices and slips
- New notice
- Edit notice
- Confirm deletion
- Batch patron modification
- Overdue notice/status triggers
- Cataloging ->
- Manage staged records
- Batch details
- MARC modification templates
- Edit actions for a template
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The HTML title of the Catalog concerns management page (which
appears in the browser tab) says Catalog concerns > Tools >
Koha. But the page is under Cataloging, not Tools.
Test plan:
1. Enable the CatalogConcerns system preference.
2. Go to Cataloging > Catalog concerns:
=> The title of the page in the browser tab says Catalog
concerns > Tools > Koha
3. Apply the patch.
4. Refresh the catalog concerns page.
5. The title of the page in the browser tab should now say Catalog
concerns > Cataloging > Koha
6. Sign off 8-)
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
If you look at the results_summary on either the results
or detail pages you will notice that the label and
content are slightly misaligned.
To test:
1. On staff results, detail page, or ISBD details notice
that slight misaligmnet between label and content.
2. Apply patch, yarn_build, clear browser cache
3. Look again, alignment should be fixed
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a "page-section" container around the contents of the
page seen when you complete the process of merging catalog records.
The patch also adds the "merge was successful" message into the standard
message dialog.
Perform a catalog search which will return more than one record.
- Select two records in your search results and click "Edit" -> "Merge
records."
- Complete the process of merging your selected records.
- On the last page you should see a "merge was successful" message
styled as the standard information box.
- The "Report" section should be shown inside a "page-section" div.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The Pseudonymization system preference description in
the staff interface is: "Disable/Enable pseudonymization
to comply with GDPR for personal information. Patrons and
transactions will be copied to a separate table for
statistics purpose."
GDPR is a European Union (and, at time of writing, UK) law;
it makes the system preference look irrelevant for
libraries outside this area. However, this is not correct:
pseudonymization may be useful for libraries anywhere.
This generalized the system preference description and
only uses GDPR as an example instead of the only purpose.
It also updates the fields listed to more closely reflect
the labels on the patron form.
To test:
* Search for "Pseudonymization" in the systme preferences
* Verify that the description of the system preference is
very GDPR
* Apply patch
* Verify the system preference description is improved
https://bugs.koha-community.org/show_bug.cgi?id=33196
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Makes sure the focus is in the first form field when adding
a new OAI set: setSpec
To test:
* Go to administration > OAI sets
* Add a new set, verify the focus is still in the search bar on top
* Apply patch
* Repeat and verify the focus is now in the first form field
* Save set
* Edit set and verify the focus is in the search field at the top
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This makes sure that the focus is in the first form field when
adding a new Z39.50 or SRU server.
To test:
* Administration > Z39.50/SRU servers
* Add a new server for each
* Verify the focus is not in the form
* Apply patch
* Verify the focus is now in the first form field
* Edit an existing server
* Verify the focus is not in the form
Not having the focus when editing is to avoid accidental changes.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
https://wiki.koha-community.org/wiki/Interface_patterns
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
During a Webinar discussion regarding the new placement of the circulation messages appearing in the Patron Detail page. It was commented by a librarian that it would be nice to have the circulation messages editable. At times libraries need to keep a specific message on a patrons account with the details such as what branch it was written from and the staff member that wrote it, but it would be nice to be able to edit this message.
Test Plan:
1) Apply this patch
2) Restart all the things!
3) Browser to a patron record
4) Create a new patron message
5) Note the patron message now has an "edit" button
6) Edit the existing message using the edit button and form
7) Check the action logs for that message, note there is a modification
logged to that message if BorrowersLog is enabled
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Laura Escamilla <laura.escamilla@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
GDPR is a European Union (and, at time of writing, UK) law.
The GDPR_Policy system preference is about a patron
giving consent to their personal data being processed in
line with the library's privacy policy.
The name of the preference is vague: there could be
many policies implemented by libraries to comply with
GDPR. It also makes the preference look irrelevant for
libraries outside the areas where GDPR applies, while
it may be useful for libraries anywhere.
This renames GDPR_Policy to PrivacyPolicyConsent and
adjusts the system preference descriptions.
To test:
* Apply the patch
* Run database update
* Search for GDPR_Policy in the system preference
- you should not find anything.
* Search for DataPrivacyConsent in the system preferences
- you should find it and be able to activate it
* Verify the feature works as expected
- If the preference is set to "enforced", you will be
asked to give consent to the data privacy agreement
in the OPAC when you log in
* Verify the page is now phrased neutrally using 'privacy policy'
Bonus: Consent date is now formatted according to DateFormat
system preference.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We could then reuse it for the contacts code in this same template, on
another bug report.
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patchset is adding the ability to create interfaces for vendors.
An interface is a website, software, or portal that you use to manage orders or
gather statistics from the vendor/organisation.
It will help librarians to keep track of those different information
within Koha.
* new DB table aqbookseller_interfaces(id, vendor_id, type, name, uri,
login, password, account_email, notes)
* new AV category VENDOR_INTERFACE_TYPE with 3 example values ADMIN,
ORDERS, REPORTS
* new pair of Koha classes Koha::Acquisition::Bookseller::Interface[s]
* new method to retrieve the interfaces from the vendor
Koha::Acquisition::Bookseller->interfaces
* Add/Delete interfaces when editing a vendor
* Display the interfaces on the vendor show view
Test plan:
- Add a new vendor
=> Notice the new "Interfaces" block
- Create some interfaces
=> They are display on the vendor show view
=> The password is hashed and can displayed on the demand
QA Note:
The "contacts" code is not very nice and I didn't want to replicate it,
so I went another way and tried to make the code reusable, for further
reutilisation.
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch replaces the 'Print' button with a 'Receipt' menu dropdown
exposing 'Print' and 'Email' options when `UseEmailReceipts` is enabled
Test plan
1. Enable `UseEmailReceipts`
2. Navigate to a patron with paid charges
3. Note the new dropdown 'Receipt' menu
4. Confirm 'Print' works as expected
5. Confirm 'Email' works as expected
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We do not want to fetch again the new image for the biblio record. We
only want to fetch those for the shelf browser.
Note that the third parameter 'covernewwindow' was not used.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Apply patch and clear browser cache
2. Turn on Coce for the OPAC.
3. OPACShelfBrowser must be on
4. Find a record that returns a cover image and open it's detail page.
5. Use the next/previous navigation links in the OPACShelfBrowser
6. Notice that no extra image is being added to the biblio-cover-slider.
7. Make sure that Coce images still load correctly in on the OPAC detail page, OPAC results page, and in the shelf browser.
Signed-off-by: Andrew Auld <andrew.auld@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The help page was missing the fixes from bug 28488. The missing
libraries are causing a JavaScript error on the page and likely
other issues.
To test:
* Make sure WebBasedSelfCheck is activated and configured
Note: In ktd you don't need to configure anything, it's already set up.
* In the OPAC, go to:
/cgi-bin/koha/sco/sco-main.pl
* Click on the link to the help in the top right corner
* Verify you see the error in the console:
jQuery.Deferred exception: __ is not defined
* Apply patch
* Restart things
* Reload the page
* Veriy the errors are gone
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Set the 'SelfCheckTimeout' system preference to something low for testing.
2. Make sure 'SelfCheckReceiptPrompt' is set to 'Show'.
3. Log in to SCO and press finish but leave the modal open.
4. Wait until the 'SelfCheckTimeout' time has expired, nothing happens.
5. Apply patch and try again. You should be logged out when SelfCheckTimeout expires.
Signed-off-by: Marius Mandrescu <marius.mandrescu@inLibro.com>
JD amended patch - fix indentation
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a warning on about.pl regarding database row formats
other than "DYNAMIC". It points to the Koha community wiki for more
information on how to resolve the problem.
This patch also stops the installer if there are any database tables
with a row format other than "DYNAMIC". It points to the Koha community
wiki for more information on how to resolve the problem.
Test plan:
0a. Apply the patch
0b. koha-plack --restart kohadev
1a. koha-mysql kohadev
1b. ALTER TABLE tags ROW_FORMAT=COMPACT;
2. Go to http://localhost:8081/cgi-bin/koha/about.pl
3. Note that there is a warning about database row formats
4a. koha-mysql kohadev
4b. ALTER TABLE tags ROW_FORMAT=DYNAMIC;
5. Go to http://localhost:8081/cgi-bin/koha/about.pl
6. Note that there is no warning about database row formats
7a. Manually change the version in Koha.pm to a higher version
7b. koha-plack --restart kohadev
8a. koha-mysql kohadev
8b. ALTER TABLE tags ROW_FORMAT=COMPACT;
9. Go to http://localhost:8081/
10. Log into the web installer and click through until you reach
a warning telling you that you have database row formats other
than 'DYNAMIC'
11. Note that you can't progress with the installer until
this problem is resolved
12a. koha-mysql kohadev
12b. ALTER TABLE tags ROW_FORMAT=DYNAMIC;
13. Refresh the page or redo the web installer process
14. Note that you're no longer blocked from running the installer
due to database row format
15. Undo your change to Koha.pm
16. Profit
Note: Due to bug 32665 you'll see an unrelated warning on
step 3
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
* Add GET /illbackends/{id}/statuses
* Change API route to ill/requests
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Use kohaTable requesting the REST api instead of the old KohaTable
Co-authored-by: Tomás Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This fixes the "Yes" and "No" options and "License info" placeholder.
To get to the options:
1. Enable the ERMModule system preference
2. Go to E-resource management
3. Click "Agreements"
4. Click "New agreement"
--> Field "Is perpetual", options are Yes and No
--> At the bottom of the form "License info" with "License info"
within the input field
5. Install (complete) language, verify those are not translated
6. Apply patch
7. Update po files
8. Verify strings exist for this file, translate if necessary
9. Re-install language
10. Verify strings are now translated
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Have advanced editor turned on.
2. Load a record with many lines and see that not all the lines appear until you click on the visible ones.
3. Apply patch and try again
4. All lines should load.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The table with items created by the inventory tool was
missing the page-section class and therefore had no
white background.
To test:
* Go to cataloguing > inventory
* When you don't have a lot of data: just submit the form
* Look at the result list, confirm missing white background
* Apply patch
* Confirm the background is now correct
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It fixes:
1. /agreements?by_expired=true do no longer explode
2. Fill date with today's date when we setup the component and when we
hit "filter"
However there are a couple of things totally wrong:
1. We should not need is_fp_disabled, we could be able to use
:disabled="!filters.by_expired"
in the template, but it does not work
2. We should not need to deal with filters.max_expiration_date the "old
JS way", but should use a Vue computed value instead. I've failed at
that
I think those 2 problems have the same root, the way we deal with
filters in data() is wrong, and we may be loosing the ref at some point.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This ensures we populate the max_expiration_date param on the browser
url for consistency with selected dates.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We need to update the filter THEN update the current route
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes some changes to the 'scan index' page.
* Updates second h1 heading "Scan index:" to h2 level heading "Scan index"
* Removes table from the search form
* Moves search index pull down and search term into one line
* Reorders options with search index first and search term after, matching
the advanced search form
* Removes the catalog results toolbar from the top, card hold etc. are not needed
here.
* Fixes doubled up id attribute: scan-index by turning one into scan-index-term.
To test:
* Go to advanced search in staff interface
* Activate 'More options'
* Check checkbox for scan indexes
* Switch to author (especially when using Elasticsearch)
* Search for C
* Check display, especially search options, options at the top of the page etc.
* Apply patch
* Verify changes listed above
* Regression test the normal search results, all should look the same with and without patch.
* If you think the scan index page is nicer now - sign off.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The pull down with search options had the wrong index
linked to the Series entry: su instead of se
To test:
* Go to advanced search in staff interface
* Activate 'More options'
* Check checkbox for scan indexes
* Switch to author (especially when using Elasticsearch)
* Search for C
* Verify search results link to authors using c
* Switch to series
* Verify search results use 'su' for subject
* Verify that search option pull down always jumps back to first
entry: Any word
* Apply patch
* Verify the search results for series now use correct index se
* Verify that coming from advanced search, the correct search option is selected
* Verify that changing the search option also keeps the selection after searching
Note: with Elasticsearch and default configuration author, title and series will
give you results.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Resolve:
Cookie “holdfor” does not have a proper “SameSite” attribute value. Soon, cookies without the “SameSite” attribute or with an invalid value will be treated as “Lax”. This means that the cookie will no longer be sent in third-party contexts. If your application depends on this cookie being available in such contexts, please add the “SameSite=None“ attribute to it.
Did not see warning for holdforclub. But since it is created with Lax, we should remove it with Lax.
Test plan:
Similar to previous patch. Check console on logout page.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Resolve:
Cookie “intranet_bib_list” does not have a proper “SameSite” attribute value. Soon, cookies without the “SameSite” attribute or with an invalid value will be treated as “Lax”. This means that the cookie will no longer be sent in third-party contexts. If your application depends on this cookie being available in such contexts, please add the “SameSite=None“ attribute to it.
basket_22.1200022.js:67:65
Test plan:
Do not apply this patch.
Logout from staff.
Check browser console warnings.
Apply this patch.
Login and logout again.
Check warnings again.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates several templates in the tools directory so that they
use the new WRAPPER for displaying breadcrumbs.
To test, apply the patch and test each page and its variations.
Breadcrumbs should look correct, and each link should be correct.
- Tools ->
- Pages ->
- View a page in the staff interface
- Upload patron images
- Upload results
- Quote editor
- Quotes upload
- OPAC problem reports (must have OPACReportProblem enabled)
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates several templates in the tools directory so that they
use the new WRAPPER for displaying breadcrumbs.
To test, apply the patch and test each page and its variations.
Breadcrumbs should look correct, and each link should be correct.
- Tools ->
- Batch extend due dates
- Access files (it is not necessary to have file access configured to
test, there are no variations to the breadcrumbs)
- News, HTML customizations, and Pages: For each category check each
variation:
- List of entries
- New entry
- Edit entry
- Cataloging ->
- Batch record deletion
- Item modifications by age
- Edit rules
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates several serials templates so that they use the new
WRAPPER for displaying breadcrumbs.
To test, apply the patch and test each page and its variations.
Breadcrumbs should look correct, and each link should be correct.
- Serials ->
- Manage frequencies
- New frequency
- Edit frequency
- Manage numbering patterns
- New numbering pattern
- Edit numbering pattern
- Search subscriptions -> View subscription details
- If necessary, edit the subscription to enable "Manual
history"
- Under the "Planning" tab of the detail page, click
"Edit history"
- If necessary, edit the subscription and select a notice under
"Patron notification."
- Under the "Information" tab of the subscription detail page,
click "subscribers"
Signed-off-by: Andrew Auld <andrew.auld@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates several serials templates so that they use the new
WRAPPER for displaying breadcrumbs.
To test, apply the patch and test each page and its variations.
Breadcrumbs should look correct, and each link should be correct.
- Serials ->
- Serials home page
- New subscription
- Serials search results
- Subscription details -> Edit subscription
- Subscription details -> Serial collection -> Edit serials
- Select one or more seach results and click the "Edit selected
serials" to test the batch edit page
Signed-off-by: Andrew Auld <andrew.auld@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates several reports templates so that they use the new
WRAPPER for displaying breadcrumbs.
To test, apply the patch and test each page and its variations.
Breadcrumbs should look correct, and each link should be correct.
- Reports ->
- Most circulated items
- Report results
- Items with no checkouts
- Report results
- Catalog statistics wizard
- Report results
- View dictionary
- New definition (steps 1-5)
- Saved reports
- View report
- New report
- Edit report
- Guided reports
- Build a report
- Steps 1 through 6
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Go to Koha Administration -> Global system preferences
2. Go to a tab with a few headings like Circulation
3. Click on a heading in the sidebar navigation under Circulation that takes you a bit down the page, like Recalls
4. Notice this anchor link does not work, you are not taken to the recalls preferences
5. Apply patch
6. Try again, the links should take you to the proper place.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch create a "apply_flatpickr" JS function to make the code
reusable from the template, where we loop over the date inputs to
reinstantiate flatpickr.
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Set the CaimReturnedLostValue system preference to one of your LOST authorised values
2. Check out an item
3. In the checkouts table, claim return
4. Notice the processing icon keeps spinning
5. Apply the patch
6. Check in the item and resolve the return claim to clear it
7. Check out an item
8. In the checkouts table, claim return
9. Confirm the checkouts table reloads and the return is claimed as expected
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Remove unused getAll methods in erm-api-client.js
Make use of new getAll query in AgreementRelationships
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We must encode properly URL parameters when building the REST API routes
Can be tested easily using
const client = APIClient.erm
client.licenses.getAll({ "me.name:%ff%" })
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In the patron_to_html function we were dealing explicitly with the case
where patron may be passed undefined, but forgetting that it may be
returned as 'null' from the api too. Changing from `( patron ===
undefined )` to `( patron == null )` is the recommended approach for
detecting 'undefined or null' in javascript.
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Works as advertised. Martin's test plan from Bugzilla:
To test.
1) Use ILS-DI to renew an checkout
2) View the circulation history for the item
3) Click the 'View' button next to the count of renewals
4) Note that the modal just stalls at 'Retrieving renewals'
5) Apply the patch
6) Now the 'retrieving renewals' message should list the renewals instead.
Note that step 2 should be something like "Go to the "Circulation
history" of the patron.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The error currently breaks some of the functionality for
updating patron attributes linked to AV values. With the
bug, the input field will not change to the AV list when selected
from the pull down of patron attributes.
It was probably bug 29648 that changed the data structure
without adapting for the additional data that is pushed
to the object for the patron attribute columns.
To test:
* Create several extended patron attributes
* Make sure at least one is linked to an AV
* Repeatable and unique patron attributes can't be
updated in batch patron modification, so you need some
that can be modified.
* Go to tools > batch patron modification
* Enter one or more cardnumbers to update
* Verify the table is missing columns, export and configure
* Verify when selecting the AV tied patron attribute, the input
remains a text one
* Apply patch
* Both should work now as expected
Note: I believe there are some more errors on this page,
but they should better be handled separately. So with this
patch we push configuration again for each column to table
columns, but the very last column keeps missing from the
columns settings.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The list of CSV profiles was not displayed if the CSV format was selected in the output format settings.
To test:
1. Go to /cgi-bin/koha/tools/export.pl
2. At the bottom of the page in the Output format, select CSV format.
*If CSV format is not active in the drop-down File format menu, create
any profile to Usage export records on the link /cgi-bin/koha/tools/csv-profiles.pl
3. Note that the list of CSV profiles is not displayed.
4. Apply the patch.
5. Restart the page and repeat steps 2.
6. Verify that when you select the CSV format, the list of CSV profiles appears.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The submitted numbers were not processed by the search query.
To test:
1. Go to /cgi-bin/koha/circ/modborrowers.pl
2. On the relevant tab, enter the card number or the borrower number in the text area, or upload a text file with a relevant list of numbers.
3. Click "Continue" and verify that a message appears stating "No patron card numbers or borrowernumbers given".
4. Apply the patch.
5. Restart the page and repeat steps 2 and 3. Make sure you receive the correct response -- a list of borrowers or a message indicating that the specified numbers were not found.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
* Add a subscription
* From the subscription detail page, click on serial collection link in left hand navigation
* Create some additional issues
* "Clear all" link for selecting issues to edit won't work, "Select all" link neither
* Apply the patch *
* "Clear all" link for selecting issues to edit works now, "Select all" link works too.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This commit fixed two cases:
1. Fixing "Select all" and "Clear all" links on the page.
2. Fixing the interaction with selected entries when switching between the "New" and "Pending" tabs.
To test:
(Create article requests if they don't exist)
Case 1:
1. Go to /cgi-bin/koha/circ/article-requests.pl and don't switch between tabs.
2. Click on "Select all" and verify that it's not working -- the checkboxes are not selected.
3. Activate any checkbox and click "Clear all" -- the checkbox is not cleared.
4. Apply the patch.
5. Restart the page and, without switching between tabs, repeat steps 2 and 3. Verify that it works now.
Case 2:
1. Go to /cgi-bin/koha/circ/article-requests.pl.
2. Switch between tabs and leave "New" active.
3. Select any entry and delete or move it to another tab.
4. Verify that the entry remains in the table until the page reloads.
5. Apply the patch.
6. Restart the page and repeat steps 2 and 3. Make sure that everything works now.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch revises the process by which the serials search results page
redirects to the batch edit page based on which checkboxes are checked.
To test, apply the patch and go to serials. You should have some
subscriptions which are open and some which are closed.
- Perform a search which will return at least one result under each tab
(Open and Closed).
- Checking one or more checkboxes should activate the "Edit selected
serials" link, which should work correctly to redirect you to the
batch edit page.
- Unchecking all the checkboxes should make the edit link disappear.
- Check that the "Select all" and "Clear all" links work the same way
manually checking checkboxes does.
- Confirm that controls under each tab work correctly just for the
results under that tab.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The tric of combining the XPath union operator (|) with the
value-of instruction works as a sort of ternary operation.
The value-of only picks the string value of the first node
from the union in document order.
So, if there is a translation, it will be the first node. If there
is no translation, the original substatus will be used. Note that
there will be no translation for authorised values like Staff
collection, etc.
Test plan:
None. Just comments.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Note: Test plan below can be followed in English. If you would like
to see the vernacular results, you need to update PO files and
translate 'Not for loan', and update templates (xslt files) accordingly.
The bootstrap PO does not yet include that string without %s suffix
in the current codebase.
Test plan:
[1] Apply this patch and make the following change in
MARC21slim2OPACResults.xsl, line 1207.
Change:
<status english="Not for loan">Not for loan</status>
to:
<status english="Not for loan">NOT for loan</status>
Important: Change text inside, not the attribute!
Restart all.
[2] Pick a biblio, add some items with different statuses: Checked out,
Damaged, Not for loan, Staff collection.
[3] Make it appear in a OPAC results display (not detail).
[4] You should see the different statuses, including NOT for loan. The
uppercase NOT serves to prove that the string has been translated. Also
verify that you see Staff collection as-is.
[5] Bonus: Toggle with values in Reference_NFL_Statuses to move results
from Reference section to Not available section v.v.
[6] Revert the change from step 1. Sign off :)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In terms of translations type can be a lot of things.
Usually translations are easier with more context, so
I've added restriction to the type :)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Enable PatronRestrictionTypes
2. Go to Administration > Patron restrictions
3. Click 'New restriction'
4. Enter a code and label
5. Click 'Save'
--> 'Type added' at the top of the page is not styled
6. Apply patch
7. Try again, dialog is styled correctly
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch add the SyndeticsCoverImageSize to the folling pages:
koha-tmpl/intranet-tmpl/prog/en/modules/catalogue/results.tt
koha-tmpl/opac-tmpl/bootstrap/en/includes/shelfbrowser.inc
koha-tmpl/opac-tmpl/bootstrap/en/modules/opac-detail.tt
koha-tmpl/opac-tmpl/bootstrap/en/modules/opac-readingrecord.tt
koha-tmpl/opac-tmpl/bootstrap/en/modules/opac-results.tt
koha-tmpl/opac-tmpl/bootstrap/en/modules/opac-shelves.tt
koha-tmpl/opac-tmpl/bootstrap/en/modules/opac-user.tt
To test:
1. Turn on SyndeticsCoverImages and SyndeticsEnabled.
2. Check the staff results page and make sure you can change the image size via SyndeticsCoverImageSize.
3. Check the OPAC results page.
4. Turn on 'OPACShelfBrowser' and make sure you change the image sizes within the shelf browser.
5. Test the OPAC checkout history page. ( opac-readingrecord.tt )
6. Have a checkout and an overdue to test the 2 tables on the OPAC summary pahe. ( opac-user.tt )
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Place a hold on a record and look at the /reserve/request.pl page.
2. Notice the two buttons 'Update hold(s)' and 'Cancel selected' buttons are not quite the same size.
3. Apply patch and look again, the buttons should line up.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates several templates in the tools directory so that they
use the new WRAPPER for displaying breadcrumbs.
To test, apply the patch and test each page and its variations.
Breadcrumbs should look correct, and each link should be correct.
- Tools ->
- CSV profiles
- New CSV profile
- Edit CSV profile
- Calendar
- Import patrons
- Results
- Cataloging ->
- Export catalog data
- Inventory
- Results
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates several templates in the tools directory so that they
use the new WRAPPER for displaying breadcrumbs.
To test, apply the patch and test each page and its variations.
Breadcrumbs should look correct, and each link should be correct.
- Tools ->
- Batch patron deletion and anonymization
- Confirmation
- Results
- Cataloging ->
- Batch item modification
- Batch item deletion
- Batch record modification
- Results
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To reproduce:
- Search for records
- Select two or more records
- Select "Edit" > "Batch delete records"
- Click "Delete selcted records"
- Click "View detail of the enqueued job"
- Verify the page says "Type: Batch bibliographic record record deletion"
To test:
- Repeat the steps above
- The page should now say "Type: Batch bibliographic record deletion"
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates two tags templates so that they use the new
WRAPPER for displaying breadcrumbs.
To test, apply the patch and test each page and its variations.
Breadcrumbs should look correct, and each link should be correct.
- Tools ->
- Tags
- Click a tag to see titles with that tag
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Run git grep "specifique key"
Run git grep "the fonction"
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1. Do not apply the patch yet
2. Make sure you have an ACQ biblio framework with some framework
plugins enabled. Create it if you don't.
3. Enable UseACQFrameworkForBiblioRecords system preference
4. Create a new acquisition basket.
5. On this new basket, click on "+ Add to basket", then "From a new
(empty) record"
6. You should see a simplified MARC editor based on ACQ framework.
Confirm that the plugins are not enabled (no visible buttons, nothing
happening on focus/blur)
7. Apply patch
8. Repeat step 5
9. You should now see the plugins' buttons (only if you enabled plugins
that use the 'click' event)
10. Confirm that the enabled plugins work correctly
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We should use the JS function to format patron's address in the
autocomplete result
Test plan:
Search for patron using the autocomplete feature, using the different values
of addressformat.
The address should be formatted correctly, like other places in Koha.
You should also notice that the street number is now displayed.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
See comment on former patch too. We need to activate the spinner
early and we can simplify the code to remove it.
Note: unfortunately this is kind of a workaround, since using
load would be nicer but currently hard to implement since the cover
image code is scattered/widespread.
This code still checks the complete attribute, we could argue that
it should just remove the spinner. Note too that the spinner belongs
to a div where multiple img may be part of. If we do not remove the
spinner now, something went wrong at load time, but if you can
actually see the spinner is another thing.
Test plan:
See former patch.
Check few cover images on detail page, enable various providers.
Bonus: I tested with a sleep statement in opac-image.pl.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We noticed that if the cover image is somewhat short (i.e. the height is under 80-90 px), the loading spinner indicating that the image is currently loading still appears after the image is loaded.
this patch remove the spinner when the image is loaded,.
To test:
1. Make sure the OPACLocalCoverImages system preference is enabled
1.1. Go to Administration > Global system preferences
1.2. Search for Coverimages
1.3. Set OPACLocalCoverImages to 'Show'
1.4. Click 'Save all Enhanced content preferences'
2. Add a short local cover image to a record (I added one which is just a grey rectangle with the size printed on it, to facilitate the test)
2.1. Download the attached image
2.2. Find a record without an image
2.3. Click the 'Images' tab
2.4. Click 'Upload'
2.5. Click 'Drop files here or click to select a file' and choose the downloaded image
2.6. Click 'Process images'
3. View the record in the OPAC
3.1. From the image upload page, click on the title of the record in the page heading to access the detailed record in the staff interface
3.2. Click on 'OPAC view: Open in new window.'
--> Note that the image is displayed normally, but the spinner is also displayed
4. Apply the patch
5. View the record in the OPAC
--> Note that the spinner is no more displayed
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
This needs a follow-up; the code in this template activates the spinner
actually when the job has been done already and did not remove it.
And we did not see that but only with a short image like above.
The construction with .one, .each is not needed given the execution
context.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates several administration templates so that they
use the new WRAPPER for displaying breadcrumbs.
To test, apply the patch and test each page and its variations.
Breadcrumbs should look correct, and each link should be correct.
Administration ->
- Record overlay rules
- Search filters (must have SavedSearchFilters enabled)
- System preferences
-> OverDriveAuthName -> OverDrive library authnames table
- MARC bibliographic framework -> MARC structure (list, new, edit,
delete confirm).
- Record matching rules (list, new, edit, delete confirm)
- OAI sets configuration (list, new, edit)
-> Define mappings
- Patron attribute types (list, new, edit, delete confirm)
- Patron restrictions (list, new, edit, delete confirm)
Signed-off-by: Andrew Auld <andrew.auld@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the suggestions template so that it uses the new
WRAPPER directive to build tabbed navigation.
To test, apply the patch and go to the suggestions page in the staff
interface.
- By default you suggestions should be organized by status, with a
separate tab for each status (pending, accepted, etc).
- Use the "Organize by" form in the sidebar to change how suggestions
are listed. In each case confirm that the tabs are redisplayed
correctly.
Works as advertised. 3/3
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates several patron templates so that they use the
new WRAPPER for displaying breadcrumbs.
To test, apply the patch and test each page and its variations.
Breadcrumbs should look correct, and each link should be correct.
- Patrons ->
- Patron details
- Notices
- Accounting
- Edit patron
- Add patron
- Patrons requesting modification (submit patron update via the OPAC)
Signed-off-by: Andrew Auld <andrew.auld@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
