Current code intended to set a fallback of xxu, an unknown state in the US,
but because the preference is always defined, just sometimes unset, it
actually falls back to three spaces, an invalid value. This patch instead
uses the fallback value ||| which means no attempt to code.
Test plan:
1. Without the patch, verify that the value of the system preference
DefaultCountryField008 is empty.
2. Cataloging - New record - Default framework (if you have the Advanced
editor enabled, Settings - Switch to basic editor, this only applies to the
basic editor)
3. On tab 0, click in the text input for field 008 which fills in default
values, then click the Tag editor button at the end of the field
4. In the popup window, verify that the value for 15-17 is shown as ###
indicating three spaces
5. Apply patch, repeat the steps above, verify that the value is now |||
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The syspref NewItemsDefaultLocation is used to set a default value for item's location.
But it seems that there are some weirdness in the behaviour:
1. It's only used from additem. It seems that it should be used from acq and serial modules as well. And maybe for the items import too.
2. It set the location even if another one has been picked from the UI
=> We UI must preselect the syspref's value, but the controller must pick what has been selected on the UI
This patch is adding the default to the UI and extend the use of the
pref to other areas.
Test plan:
Set a value to NewItemsDefaultLocation
Catalogue a new item and confirm that the syspref's value is picked to
selected the default value on the add item form
Same behaviour should apply to the acquisition and serial modules
When importing items, the default location must be used if the imported
items did not have a location defined.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Sponsored-by: Orex Digital
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This new enhancement adds the ability to change the default order the subfields.
Both bibliographic and authority MARC subfield structure are taken into
account. And so the item edition as well (in the different screens when
item can be added/edited).
This will answer the following needs that have been listed in the
comments of the bug report:
- $i in 7xx fields should be the first subfield in the sequence
- 300 fields are sorted number first when cataloguers enter the letter fields first
- 100 field, it's commonly $a, $q, $d.
Test plan:
1. Edit a MARC frameworks, field 300
2. Resort the subfield (drag and drop the tab of the subfield) as you
like
3. Save
=> Notice that the list of fields are displayed following the order you
chose
4. Edit it again
=> The order is correctly kept!
5. Create a new bibliographic record
6. Notice that the subfields are order in the same sequence
7. Fill different subfields, not all
8. Save, edit again
9. Note that the subfields that have been filled are listed first, then
the empty ones. But the sequence defined at the framework level is kept.
10. Do the same for an authority framework and create/edit an authority
record
11. Modify item (952) subfields order
12. Create an item and confirm that the order is correct
13. Modify the ACQ framework, 952, modify the order of the subfield
14. Create a new order and confirm that the item form has the subfield
ordered following the sequence defined at the framework level
QA: Note that this patch is about bibliographic records only, next
patches deal with authotiries and items.
Sponsored-by: Orex Digital
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch simply sets the searchid to a blank string if not passed in
To test:
1 - Add a new biblio and save it
2 - Check the logs: /var/log/koha/kohadev/plack-intranet-error.log (or similar)
3 - Note warn about uninitialized value
4 - Apply patch
5 - Add a new biblio
6 - No warn
Signed-off-by: Phil Ringnalda <phil@chetcolibrary.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We should remove all SQL queries that contain 0000-00-00 and finally
assume we do not longer have such value in our DB (for date type)
We already dealt with such values in previous update DB entries.
The 2 added by this one haven't been replaced already.
The code will now assume that either a valid date exist, or NULL/undef.
Test plan:
QA review is needed and test of the different places where code is
modified.
Not sure about the change from reports/issues_avg_stats.pl
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Sometimes additem.pl will complain about "Storable::thaw failed to
thaw LastCreatedItem-cookie.", see bug 14844. Now, actually fix the bug.
The bug is caused by trying to URI (un)escape MARC::Record, binary data.
We'll use a base64 url-safe version instead.
Test plan:
1: Set PrefillItem to 'The new item is prefilled...'
2: Set a SubfieldsToUseWhenPrefill, 'c' for example
3: Add a new item for biblio A with 'c' set.
4: Double check 'c' value is set for next new item A.
5: search and add a new item for biblio B
6: 'c' is not set
Apply patch
7: logout, login
8: repeat steps 3, 4, and 5 .
9: now 'c' is set.
Signed-off-by: Pasi Kallinen <pasi.kallinen@joensuu.fi>
Signed-off-by: James O'Keeffe <jamespfk@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
JD amended patch: fix commit title and add test plan
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
add authority type in the form to create the missing authority.
when authority was found, the 600$9 field have the authid.
Testing scenario (Creating an authority record for a failed automatic link) :
1 - In your system preferences set:
AutoCreateAuthorities: Don't generate
BiblioAddsAuthorities: Allow
2 - Go to the Cataloging -> New record (koha/cataloguing/addbiblio.pl)
Ensure you are using the basic editor
3 - Click the "Link authorities automatically" button.
A message should appear, telling the user "No authority link was changed."
4 - Add random informations in field 600$a of the biblio record.
5 - Click the "Link authorities automatically" button.
the message box should now show "600 - No matching authority found.".
the 9 subfield is red
Above the 9 subfield is a red X with a blue plus next to it
Hover on the plus, see it is titled 'Create authority'
6 - Click the 'Create authority' link
7 - A new authroity form pops up, the info from the cataloging editor is prefilled
Click the 100 field heading to expand and confirm info is transferred
8 - Fill in necessary fields and save the new authority
9 - The cataloging screen now has the 9 subfield populated and is green
10 - Click "Link authorities automatically" again
Dialog says "No authority link was changed"
11 - In another tab go to System preferences and set AutoCreateAuthorities to 'Generate'
12 - Add random information to the 650 field
13 - Click 'Link authorities' button
14 - Dialog says:650 - No matching authority found. A new authority was created automatically.
15 - The subfield 9 is green and has the id of the new authority record
16 - In another tab search authorities and find an existing subject heading
17 - Add a new 650 with the info from the existing record
18 - Click 'Link authorities'
19 - The new field is correctly linked to existing authority
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
https://bugs.koha-community.org/show_bug.cgi?id=12299
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
If you search for a call number like "M KRUEGER CO #11" in the
cn_browser.pl plugin, your query is cut off at "M KRUEGER CO " because
the hash isn't escaped, so the browser thinks you are opening a
window and trying to navigate to the element with the id 11 rather
than passing the #11 to the server.
To test:
1) Find the record you will use to test, determing the MARC
framework it uses by going to Edit > Edit record > Settings
2) In Administration > MARC bibliographic framework, click MARC
structure in the Actions menu for that framework
3) Navigate to the 952 tag, in the Actions menu click Edit subfields
4) In the tab for o, choose the Plugin cn_browser.pl and click
Save Changes
5) Click the Edit button next to one of the items on your record
6) In the Full call number field, add " CO #11" to the call number
7) Click the ... next to the field to open the Tag editor
8) In the popup window, verify that the search field includes the
" CO #11" you added to the call number
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Previously we put all the servers into an object with keys of the server id
This patch converts it to an array of objects to preserve order, and adjusts code to use the array index
where necessary and store the server id within the array
To test:
1 - Add some new Z3950 servers, they don't need to be valid
FIRST
SECOND
THIRD
FOURTH
2 - Adjust the ranking so FOURTH:1 THIRD:2 SECOND:3 FIRST:4
3 - Enable and launch the advanced editor
4 - Click 'Advanced' under search on the left
5 - Note the list displays in the order you entered the servers
6 - Apply patch
7 - Reload
8 - Order is correct
9 - With valid servers, confirm that searching still works and servers can be checked or unchecked to include/remove from results
https://bugs.koha-community.org/show_bug.cgi?id=17515
Signed-off-by: B Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Also adds syspref to optionally choose to embed item information in record when adding/editing bibliographic and item records.
Test plan:
1. Enable OAI-PMH and OAI-PMH:AutoUpdateSets sysprefs
2. Create a biblio record with 1 item with CCODE of NFIC
3. In Administration > OAI Sets configuration create a set and define
the mapping:
Field: 952, Subfield: 8, Operator: is equal to, Value: FIC
4. Run the build_oai_sets.pl script:
cd misc/migration_tools
sudo koha-shell <instancename>
./build_oai_sets.pl -i
5. Check what items are in the OAI set:
sudo koha-mysql <instancename>
select * from oai_sets_biblios;
6. Observe your bib from step 2 is not in the set
7. [ITEM EDIT] Edit the item to have CCODE of FIC repeat step 5 and observe biblio is still not in OAI set
8. [ITEM ADD] Add a new item with CCODE of FIC and repeat step 5 and observe biblio
still not in OAI set
9. [ITEM DELETE] Delete one of your 2 items and repeat step 5 and observe biblio still
not in OAI set
10. Apply patch, update database and restart plack (instruction below on
the latter 2 actions):
cd installer/data/mysql
sudo koha-shell <instancename>
./updatedatabase.pl
sudo koha-plack --restart <instancename>
11. Enable new syspref OAI-PMH:AutoUpdateSetsEmbedItemData
12. [ITEM ADD] Repeat step 8 and observe biblio is now in the OAI set
13. [ITEM EDIT] Edit both items to have a CCODE of NFIC and repeat step 5 and
observe bib now not in set
14. [ITEM EDIT] Edit one of the items to have CCODE of FIC and repeat step 5
and observe bib now in set
15. [ITEM DELETE] Delete all items off bib and repeat step 5 and observe bib
no longer in set
Sponsored-By: Catalyst IT
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes some minor changes to the JavaScript generated by the
cataloging plugins: <script> "type" attribute removed; single-line
comments converted to multi-line style; obsolete //<
