Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
There was previously an ambiguity between the branch/category/itemtype
specific max{,onsite}issueqty and the total-per-patron max{,onsite}issueqty.
The latter has been renamed to patron_max{,onsite}issueqty.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch set moves maxissueqty and maxonsiteissueqty to the
circulation_rules table.
Test Plan:
1) Apply this patch
2) Run updatedatabase
3) prove t/db_dependent/Circulation.t
4) prove t/db_dependent/Circulation/Branch.t
5) prove t/db_dependent/Circulation/GetHardDueDate.t
6) prove t/db_dependent/Circulation/Returns.t
7) prove t/db_dependent/Circulation/SwitchOnSiteCheckouts.t
8) prove t/db_dependent/Circulation/TooMany.t
9) prove t/db_dependent/Holds/DisallowHoldIfItemsAvailable.t
10) prove t/db_dependent/Reserves.t
11) Note no changes in circulation behavior related to check out limis
both on and off site
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Known Side Effect: Prior to this patch issuing charges were not
recorded in the FinesLog. After this patch, if the FinesLog is
enabled then the 'action' will be recorded as `create_rent`.
Sponsored-by: PTFS Europe
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch updates C4::Accounts::chargelostitem to use the newly
available add_debit method from Koha::Account.
Known Side Effects: If the FinesLog is enabled then the 'action'
recorded will change from the generic `create_fee` (for both the lost
charge and any associated processing charge) to the more descriptive
terms `create_processing` and `create_lost_item`.
Sponsored-by: PTFS Europe
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
1) Open C4/XSLT.pm and confirm that the trailing space at line 313 is
gone.
2) Sign off.
Signed-off-by: Hayley Mapley <hayleymapley@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch intelligently renames the account_offset types for updateing
fines from `Fine Update` to `fine_increment` and `fine_decrement`
depending on the sign of the calculated difference of the adjustment.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Set to use Koha::Account->add_debit and Koha::Account::Line->adjust
Known Side Effect: The format of the FinesLog, if enabled, is changed
after this patch. Prior to this patch the $actionname was left undefined
and the $infos field contained the string:
`"due=".$due." amount=".$amount." itemnumber=".$itemnum`
After this patch, the logs are more consistent with other FINES logs,
with an $actionname of 'CREATE' or 'UPDATE' and the $infos field
containing a Dumper of fine data.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes the mentioned method use the biult-in method for
resuming a suspended hold, instead of manually setting the specific
attributes using the accessors.
The side effect for this is that HoldsLog is now honoured.
This patchset also refactors the tests a bit so they rely on the exposed
methods and thus don't rely on specific implementation details (like
suspended hold means a date in suspended_until plus suspended=1).
To test:
- Apply the regression tests patch
- Run:
$ kshell
k$ prove t/db_dependent/Reserves/AutoUnsuspendReserves.t
=> FAIL: It fails loudly because things are done manually
- Apply this patch
- Run:
k$ prove t/db_dependent/Reserves/AutoUnsuspendReserves.t
=> SUCCESS: Tests pass!
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The variable name $utf8 is very misleading: it contains MIME-Header encoding.
$message->{subject} comes from the database and is in perl internal format;
it should NOT be decoded as a MIME-Header.
After encoding to MIME-Header, previously another (useless) encoding to
UTF-8 was done. Since the string is plain ASCII, this is useless and
theoretically wrong. We should stay in MIME-Header.
Test plan:
See Bugzilla comment5.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Some SIP devices ( in this particular case, bin sorting machines from RFID Library Solutions ) require a CT field to be sent, even if that field is empty. Koha should be able to support this behavior.
Test Plan:
1) Apply this patch
2) Enable the new option ct_always_send for a SIP2 account
3) Restart SIP
4) Check in an item successfully via SIP, which will not be transferred
5) Note the response contains a CT field with no value
Sponsored-by: Pueblo City-County Library District
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jill Kleven <jill.kleven@pueblolibrary.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Some SIP devices ( in this particular case, bin sorting machines from RFID Library Solutions ) require a checkin success to return a CV field of the value "00" rather than no CV field at all. Koha should be able to support this behavior.
Test Plan:
1) Apply this patch
2) Enable the new option cv_send_00_on_success for a SIP2 account
3) Restart SIP
4) Check in an item successfully via SIP
5) Note the response contains a CV field with the value '00'
Sponsored-by: Pueblo City-County Library District
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jill Kleven <jill.kleven@pueblolibrary.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Fix conflict with
commit f8544ba579
Bug 21999: Move attributes to a variable to not dup them
Thanks tests!
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
prove t/db_dependent/Circulation.t
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Note: This is here for information purpose, feel free to test it if you
wan to play with it.
TODO: C4::Reserves::_get_itype is not longer in use
No more GetItem must be returned by:
git grep GetItem|grep -v GetItemsAvailableToFillHoldRequestsForBib|grep
-v GetItemsForInventory|grep -v GetItemsInfo|grep -v
GetItemsLocationInfo|grep -v GetItemsInCollection|grep -v
GetItemCourseReservesInfo|grep -v GetItemnumbersFromOrder|grep -v
GetItemSearchField|grep -v GetItemTypesCategorized|grep -v
GetItemNumbersFromImportBatch|cut -d':' -f1|sort|uniq
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
issues.lastreneweddate is a datetime and we could record the time part
of the date.
Test plan:
Renew an issue
note that the time part of the last renewed date is set correctly
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Many SIP services send an empty password field (AD). Even if allow_empty_passwords is enabled for the given SIP account, this empty password is run though Koha's password checker which increments the number of login attempts for a patron. Thus repeated patron information requests can lock a patron out! Empty password fields in SIP should not call for a password check if allow_empty_passwords is enabled.
Test Plan:
1) Enable a patron password attempt with a limit of 3
2) Send 4 patron information requests with an empty AD field
3) Note the patron's account is now locked
4) Apply this patch
5) Repeat step 2 with a different patron
6) Note the patron's account does not get locked!
Signed-off-by: Charles Farmer <charles.farmer@inLibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
TEST PLAN
---------
1) Log in to staff client
2) Click Koha administration
3) Click MARC bibliographic framework
4) export default as xml
5) Read the error log
-- it's floody and export is default framework
6) export another framework as xml
7) Read the error log
-- it's floody and export is the correct framework
8) apply the patch
9) repeat steps 4-7
-- expected frameworks exported, and no flooding.
10) run koha qa test tools
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The numerical restricted value was overwritten in GetItemsInfo
with the description. So OpacHiddenItems would only work for
restricted using the description, not the numerical value
of the authorised value like for other similar status fields.
This changes GetItemsInfo to use a separate variable for
the description, as it's already done for notforloan and
changes the template files where the variable is used
accordingly.
To test
- Before applying patch
- Configure OpacHiddenItems with:
restricted: [1]
- Find a record with more than one item and mark one of the items
as "Restricted Access"
(assume standard sample data - check authorised value if status doesn't exist)
- Verify the item is still shown in OPAC.
- Apply patch
- Verify that the item is now hidden
- Verify that the status still displays nicely in the staff detail page
- Delete OpacHiddenItems
- Verify that the status is showing nicely in the OPAC detail page
Signed-off-by: Pierre-Marc Thibault <pierre-marc.thibault@inLibro.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Only use of $pending was removed in the former patch.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
AddIssue already checks for holds in the item being issued and deals with them
The sip code, additionally, does not consider that multiple holds per bib
is allowed
To test:
0 - Apply only first patch (unit tests)
1 - Place two holds for a patron on a bib
2 - Checkout that item via sip_cli_emulator
3 - Note all holds are cancelled/filled
4 - prove -v t/db_dependent/SIP/Transaction.t
5 - it fails
6 - Apply second patch
7 - prove tests, all green
8 - Place two holds on a single bib for one patron again
9 - Checkout the item via sip_cli_emulator
10 - Only one holds is filled
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Like Bug 20702 defined GetHostItemsInfo does nothing if EasyAnalyticalRecords pref is disabled, get_hostitemnumbers_of must be dependant on this pref too.
Test plan :
1) Build an analytical record with 773$0 and $9
2) Enable EasyAnalyticalRecords
4) Place an hold on the record
5) => You see the linked item
6) Disable EasyAnalyticalRecords
7) Place an hold on the record
8) => You dont see the linked item
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Like Bug 20702 defined GetHostItemsInfo does nothing if EasyAnalyticalRecords pref is disabled, there are other places where code must be dependant on this pref.
Test plan :
1) Build an analitical record with 773$0 and $9
2) Enable EasyAnalyticalRecords
3) Don't apply patch
4) Go to OPAC
5) Perform a search that displays the record, check there is the linked item
6) Open record detail page, check there is the linked item
7) Apply patch and redo 5) and 6)
8) Disable EasyAnalyticalRecords
9) redo 5) and 6), you should not see the linked item
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
dateexpiry is a date, we should not display the time
part in notice.
Test plan:
Create a notice with borrowers.dateexpiry, generate this notice.
The value should be displayed without the time part
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
- Try holding a title without items via ILS-DI
(cgi-bin/koha/ilsdi.pl?service=HoldTitle&patron_id=1&bib_id=1),
- you get an error,
- apply this patch,
- try again,
- you should get the code "Notitems"Bug 21738: check items count in
C4:ILSDI::HoldTitle
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Bug 18816 missed the fact that a branch transfer triggers ModItem and
thus generates an action log line. We should not be creating those
action logs, especially considering the transfers table itself already
documents the transfer.
Test Plan:
1) Enable CataloguingLog
2) Transfer an item to another branch
3) Note the new action log line created
4) Apply this patch
5) Create another item transfer
6) No new action log line should be created!
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
1 - Catalog an item under LCC with callnumber GT95
2 - cn_sort should calculate as GT0095
3 - Go to inventory tool
4 - Enter a range that should have your item e.g LC GT90 to GT100
5 - Item is not returned
6 - Apply patch
7 - Item should be returned
8 - Verify things otherwise work as expected
Signed-off-by: Anne-Claire Bernaudin <anne-claire.bernaudin@univ-rennes1.fr>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
https://bugs.koha-community.org/show_bug.cgi?id=19905
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch makes the code using Koha::Biblio::Metadata->marcflavour use
->schema instead for all interactions.
To test:
- Update the DB structure:
$ updatedatabase
- Update the schema files:
$ dbic
- Notice all the places in which biblio_metadata is used
$ cd kohaclone
$ git grep biblio_metadata
=> SUCCESS: They all use `schema` instead of marcflavour
- Notice all the places that use Koha::Biblio::Metadata:
$ git grep Koha::Biblio::Metadata
=> SUCCESS: They all use the schema attribute when they used to use
marcflavour
- Run all the modified tests and scripts
=> SUCCESS: We are all good
- Sign off :-D
Note: while this seems like a minor change, the places in which plain
SQL is used really require understanding the queries and how they are
used, because some query results might be passed to some other method
that in turn uses the marcflavour attribute. I of course took that into
account but errare humanum est :-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
To test:
Review the patch and check it is now updated correctly
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds borrowers.phone as 'Primary phone' in the checkout
search results. It also ads the table to columns configuration
To test:
1 - Perform a checkout search
2 - Note phone is not displayed
3 - Apply patch
4 - Note phone does not display
5 - Visit columns configuration
6 - Unhide the 'phone' column
7 - Note phone displays
8 - Ensure page functions as before patch
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The double call to CanItemBeReserved was pointless in
the C4/Reserves.pm HoldItem, as CanBookBeReserved calls
CanItemBeReserved and even returns that code.
Additionally, the tests failed, because there were 5
tests not 4.
TEST PLAN
----------
prove t/db_dependent/ILSDI_Services.t
run koha qa test tools
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Currently, the ILDSI services HoldTitle and HoldItem always return a
"NotHoldable" code is the reserve is impossible. We need to know why
Test plan:
- Apply this patch
- Place a hold on a non reservable title using ILS-DI web service
(http://koha-opac.example.org/cgi-bin/koha/ilsdi.pl?service=HoldTitle&patron_id=1&bib_id=1&request_location=)
- you should get the reason instead of NotHoldable,
- Place a hold on a non reservable item using ILS-DI web service
(http://koha-opac.example.org/cgi-bin/koha/ilsdi.pl?service=HoldItem&patron_id=1&bib_id=1&item_id=1)
- you should get the reason instead of NotHoldable,
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Also added the new pref to sysprefs.sql
Also simplified the conditional statement.
Sponsored-By: Brimbank Library, Australia
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch adds a new system preference (FallbackToSMSIfNoEmail)
which if enabled Koha will send suggestion notices by SMS if a borrower
has a defined SMSalertnumber and no email.
The use of the syspref prevents automatic fallback to sending suggestion notices as SMS when there's no defined email.
Test plan:
1. Chose a patron who has no email address set, but does have a
smsalertnumber set (this value is set in the Patron messaging
preferences section after the SMSSendDriver syspref is set)
2. Log into the OPAC with that user and submit a suggestion
3. In the staff client go to Acquisitions->Suggestions and tick the
suggestion and set its status to 'Accepted'
4. In the database query the message_queue and notice the
message_transport_type of the message is set to 'email' even though the
patron has no email address set.
5. Apply patches, restart memcached and plack
6. Check the 'FallbackToSMSIfNoEmail' syspref
is disabled
7. Repeat steps 2,3 and observe in the message_queue
table the message_transport_type = 'email'
i.e. If the syspref is disabled then the message is still sent by email
to borrowers with defined smsalertnumber and no email address
8. Enable the 'FallbackToSMSIfNoEmail' syspref
and repeat steps 2,3 and notice the
message_transport_type = 'sms'
i.e. If the syspref is enabled then the message is sent by sms to
borrowers with defined smsalertnumber and no email address
9. Repeat steps 2,3 with a patron with an email
address and no smsalertnumber trying with the 'FallbackToSMSIfNoEmail' syspref
enabled and disabled and notice in both cases the
message_transport_type = email.
i.e. If a borrower has an email address defined the suggestion
notice will always be sent via email
10. Repeat steps 2,3 with a patron with no email or smsalertnumber trying with the 'FallbackToSMSIfNoEmail' syspref enabled and disabled and notice in both cases the message_transport_type = email
i.e. If the borrower has no smsalertnumber and no email defined then the
suggestion notice will be sent by 'email'
11. Run t/db_dependent/Suggestions.t
Sponsored-By: Brimbank Libraries, Australia
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 21241: (follow-up) Renamed system preference
Sponsored-By: Brimbank Library, Australia
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Introducing a conditional into C4/Suggestions.pm to check if no patron
email exists but a smsalertnumber does exist then the suggestion notice
message_transport_type is set to 'sms', otherwise the suggestion
message_transport_type='email'.
This ensures patrons with no email address still receieve their
suggestion notices because at present the message_transport_type is
hardcoded to 'email'.
Test plan:
1. Chose a patron who has no email address set, but does have a
smsalertnumber set (this value is set in the Patron messaging
preferences section after the SMSSendDriver syspref is set)
2. Log into the OPAC with that user and submit a suggestion
3. In the staff client go to Acquisitions->Suggestions and tick the
suggestion and set its status to 'Accepted'
4. In the database query the message_queue and notice the
message_transport_type of the message is set to 'email' even though the
patron has no email address set.
5. Apply this patch, restart memcached and plack
6. Repeat steps 2,3 with the same patron and query the message_queue
table again and notice this time the message_transport_type = 'sms'
7. Repeat steps 2,3 with a patron with no smsalertnumber or email
address. Query the database and observe the
message_transport_type=email.
If no smsalertnumber is set then the message_transport_type is set to
'email' by default
Sponsored-By: Brimbank Library, Australia
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Test plan:
Try to upload koc file with some returns
Success: the file should be correctly processed
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
The $circControlBranch variable was originally set to be used to pick
the right dropbox branch. It was only used in MarkIssueReturned, to get
the right Koha::Calendar object. As this responsability was moved top to
the AddReturn caller, and the fact that _GetCircControlBranch is
actually used for fines rules, there's no use for it in this context.
And it was left on the previous patch as a mistake.
To test:
- Make sure the variable is not actually used:
$ git grep '$circControlBranch'
=> SUCCESS: removed variable is not actually used.
- Sign off :-D
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Charles Farmer <charles.farmer@inLibro.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
This patch changes the params accepted by
C4::Circulation::MarkIssueReturned by removing the $dropbox_branch
param.
This passed branchcode was only used to initialize the Koha::Calendar
object, but the date arithmetic has already taken place in a couple
places before we reach this point. This logic needs to be simplified
(bug 14591), and this is the starting point.
To test:
- Apply this patch
- Run:
$ git grep MarkIssueReturned
=> SUCCESS: Check all the uses of the function either originally passed
undef, or now pass the same date that would've been calculated anyway,
in the returndate param.
- Run:
$ kshell
k$ prove t/db_dependent/Circulation/MarkIssueReturned.t
=> SUCCESS: Tests pass!
- Sign off :-D
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Charles Farmer <charles.farmer@inLibro.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
