This is based on Julian's idea on bug 28026 where we could get rid of call_recursive by passing refs as arguments to call.
Test Plan:
1) Apply this patch
2) prove t/db_dependent/Koha/Plugins/Plugins.t
3) prove t/db_dependent/Koha/Plugins/Barcode_transform_hooks.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The previous patch makes check_cookie_auth return the session instead of
$sessionID, so we are adjusting the different calls to prevent
confusion.
However they are mainly used to check the authentication status and
don't care about this second variable.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This bug allows for batch printing of multiple article requests slips
To test:
1. apply this patch
2. restart_all
3. enable ArticleRequests preference
4. create multiple article requests
5. go to circ/article-requests.pl in staff interface
6. print a single slip from a row
CHECK => it works as expected
7. select all rows and print slip from general actions menu (above the table)
SUCCESS => all article requests slips are printed
8. select multiple rows (not all) and print slip from general actions menu (above the table)
SUCCESS => only selected article requests slips are printed
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
JD amended patch: Perltidy!
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Show the TOC checkbox on OPAC and staff.
Test plan:
Add new article request on OPAC or staff. Tick checkbox.
Verify if TOC is Yes on opac-user or staff patron details.
Check the list view on circ/article-requests.pl.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The 'Checkout' search hijacks some of the DataTables searching code used for 'Search patrons'
Rather than try to implement the search again on another page, we can simply send the user
to the patron search if the cardnumber is not found
Additionally, this patch adds a 'Check out' button to the patron search results to allow
going to checkotus directly
To test:
1 - Apply patch
2 - Perform a 'Checkout' search from the header
3 - Note that:
For a cardnumber, you are redirected directly to checkouts page for the borrower
For a search with one result, you are redirected directly to the checkout page for the borrower
For a search with many results, you are redirected to the patron search results
and there is a 'Checkout' button under the cardnumber
4 - Confirm circulation page works as expected (i.e. checkout to a patron)
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: George Williams <george@nekls.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Some of our partners have unusual barcode requirements that have
required us to transform scanned barcodes using javascript. This is not
the most reliable method. It would make more sense to have Koha
transform the barcodes on the backend using a plugin. We should add
hooks to transform and generate new item and patron barcodes.
Test Plan:
1) Apply this patch
2) Download and install the Barcode Transformer plugin
https://github.com/bywatersolutions/koha-plugin-barcode-transformer/releases/download/v1.0.1/koha-plugin-barcode-transformer-v1.0.1.kpz
3) Go to the plugin configuration page, set the configuration to the example configuration from the same page
4) In the patron search and anywhere else you can scan a patron
cardnumber, type in some cardnumbers but prefix them with A and postfix
them with A or B, e.g. A12345A, A12345B
5) Note the letters are removed by Koha!
6) Try a cardnumber like X123456Y
7) Note Koha converts it to Z13456Z
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Some of our partners have unusual barcode requirements that have
required us to transform scanned barcodes using javascript. This is not
the most reliable method. It would make more sense to have Koha
transform the barcodes on the backend using a plugin. We should add
hooks to transform and generate new item and patron barcodes.
Test Plan:
1) Apply this patch
2) Download and install the Barcode Transformer plugin
https://github.com/bywatersolutions/koha-plugin-barcode-transformer/releases/
3) Go to the plugin configuration page, set the configuration to the example configuration from the same page
4) In the item barcode field on the checkin and checkout pages,
and anywhere else you can scan an item barcode, type in some
valid barcodes, but prefix them with X and postfix them with
Y, e.g. X123456Y
5) Note the letters are removed by Koha!
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: (QA follow-up) Fix QA script issue
* Fixes issue with barcode generate stub so perlcritic is happy
* Removes extra semicolon from return call in configure method
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: Add unit tests
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: (QA follow-up) Remove unused method barcode_transform
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: (QA follow-up) Rename barcode_transform to item_barcode_transform
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: (QA follow-up) Barcodes inputted into Koha should always pass though barcodedecode
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: (QA follow-up) Catch one last case of itemBarcodeInputFilter
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: (QA follow-up) Fix Checkouts.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: Use call_recursive() as a replacement for call()
The method `call()` is not sufficient for barcode transformations. It's
possible that more than one barcode transformation plugin will be
installed. The `call_recursive()` method takes the output of the first
plugin and uses it as the input for the next plugin and so on. This allowes
each plugin to see the current version of the barcode and modify it if
necessary.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: Fix t/db_dependent/Koha/Plugins/Circulation_hooks.t
Bug 26351: Revert improper change to unit test, fix number of tests
Bug 26351: Remove uneeded use Koha::Plugins statements
Left over from previous changes
Bug 26351: Add missing barcodedecode import
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds better error handling and reporting when placing an
article request fails. It also makes the error messages translatable.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes it possible to limit article requests per patron per day.
To test:
1. Apply patches
2. updatedatabase
3. Enable ArticleRequests preference
4. Edit a patron category and set an article request limit to 1
CHECK => if you set the limit to anything else but a positive number or empty string, a warning appears
5. In staff search biblios and request an article for a patron of the modified category
6. Repeat step 5
SUCCESS => if limit is reached, when you select the user to request an article a warning appears saying that the limit was reached
7. Repeat steps 5 and 6 but this time in opac
SUCCESS => Patron is not allowed to request another article if limit is reached
8. prove t/db_dependent/ArticleRequests.t
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Edit: This patchset originally changed the 'categories' table structure
and relied on that for limit calculation. I removed all that code and
squashed into this one, as we moved everything to the circulation_rules
table.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the stage "requested" in article request process, which
is previous to pending stage.
To test:
1. apply this patch
2. updatedatabase
3. enable ArticleRequests syspref
4. from staff inteface and from opac search for a record and place an
article request
5. koha-mysql kohadev
6. query: select subject, content, letter_code from message_queue;
CHECK => There is a message for each article request with code
AR_REQUESTED
=> In opac-user.pl, in "Article requests" tab you should see a row
in the table with "Requested" status
5. in staff go to Circulation -> Article Requests
SUCCESS => You should see 3 tabs, one for Requested stage (with two
requests), one for Pending stage and one for Processing stage.
6. play with actions buttons
CHECK => you should see a new action called "Set request as pending"
SUCCESS => All action buttons behave as expected, and tab counts updates
correctly.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch allows staff patrons to cancel multiple holds in bulk.
To test:
1. Apply this patch
2. restart_all
3. In cataloge go to a book and place many holds
CHECK => Holds table shows a column of checkboxes
4. Play with checkboxes (have some fun ;-P)
CHECK => When you manually check all checkboxes, the checkbox in the
header also gets checked.
=> When you uncheck one of the checkboxes, the one in the header also gets unchecked.
=> If no checkbox is checked and you check the one in the header,
all checkboxes get checked.
=> If there are some checkboxes that are checked and others are
not, when you click on the checkbox in the header all checkboxes get
unchecked.
=> If all checkboxes are checked, when you uncheck the one in the
header, all checkboxes get unchecked.
=> Every time you play with checkboxes, the number in the button
"Cancel selected" changes.
5. Check some of the checkboxes and click on cancel selected.
SUCCESS => A background job gets fired to cancel all selected holds.
=> A message should appear with a link to the job.
6. Wait a few seconds and click on the link
SUCCESS => A message appears with the report of the execution of the
background job.
7. Grab a patron and search to hold
8. Select multiple biblios and click on "place hold for <patron>"
CHECK => After holds are confirmed, multiple holds table are shown.. one for
each record. Checkboxes work exactly the same as before, but scoped
for each individual table. Checkboxes from one table will not affect
checkboxes from other tables.
9. Repeat steps 4 to 6.
10. Check In some of the items so the get in Waiting state.
11. Update expirationdate os some of those holds and set it to
ReservesMaxPickUpDelay + 1 days earlier
NOTE => ReservesMaxPickUpDelay = 7 days by default, so sql syntax to update would be
=> update reserves set expirationdate = date_sub(expirationdate, interval 8 day) where reserve_id in (...)
12. Repeat steps 4 to 6 but in waitingreserves.pl, in both tabs.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 23678: (QA follow-up) Add missing template filter
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 23678: (QA follow-up) Add missing filters
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 23678: (QA follow-up) Use correct indentation
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
JD amended patch: also Koha/BackgroundJob/BatchCancelHold.pm
JD Amended patch: Full rebase and adjustements made on top of bug 26080.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1. have some overdues
2. go to the overdue report on the circulation page (overdue.tt)
3. no shelving location
4. apply patch and restart the things
5. look at the overdue report again and there should be a Shelving location column
6. make sure it is accurate
7. go to table settings and make sure you can properly hide the column. test other columns in the table and make sure they are still hiding correctly as well
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch modifies the patron search autocomplete so that library name
is shown instead of library code.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch alters a few different patron search interfaces so that
patrons from the currently-logged-in library are highlighted in a way
that differentiates them from other patrons.
To test, apply the patch and rebuild the staff interface CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- In Administration -> System preferences, make sure the
PatronAutoComplete preference is enabled.
- In the "Check out" tab in the header, type a partial patron name which
will return multiple results and wait for the autocomplete menu to
appear..
- Patrons in the autocomplete results should show the branchcode, and
patrons from the currently-logged-in library should be highlighted
in green.
- Submit your partial name in the "check out" tab.
- In the search results the branch name of patrons from the
currently-logged-in library should be similarly highlighted.
- Go to patrons browse for patrons. These results should be highlighted
as in the previous steps.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
On bug 17591 we discovered that there was something weird going on with
the way we export and use subroutines/modules.
This patch tries to standardize our EXPORT to use EXPORT_OK only.
That way we will need to explicitely define the subroutine we want to
use from a module.
This patch is a squashed version of:
Bug 17600: After export.pl
Bug 17600: After perlimport
Bug 17600: Manual changes
Bug 17600: Other manual changes after second perlimports run
Bug 17600: Fix tests
And a lot of other manual changes.
export.pl is a dirty script that can be found on bug 17600.
"perlimport" is:
git clone https://github.com/oalders/App-perlimports.git
cd App-perlimports/
cpanm --installdeps .
export PERL5LIB="$PERL5LIB:/kohadevbox/koha/App-perlimports/lib"
find . \( -name "*.pl" -o -name "*.pm" \) -exec perl App-perlimports/script/perlimports --inplace-edit --no-preserve-unused --filename {} \;
The ideas of this patch are to:
* use EXPORT_OK instead of EXPORT
* perltidy the EXPORT_OK list
* remove '&' before the subroutine names
* remove some uneeded use statements
* explicitely import the subroutines we need within the controllers or
modules
Note that the private subroutines (starting with _) should not be
exported (and not used from outside of the module except from tests).
EXPORT vs EXPORT_OK (from
https://www.thegeekstuff.com/2010/06/perl-exporter-examples/)
"""
Export allows to export the functions and variables of modules to user’s namespace using the standard import method. This way, we don’t need to create the objects for the modules to access it’s members.
@EXPORT and @EXPORT_OK are the two main variables used during export operation.
@EXPORT contains list of symbols (subroutines and variables) of the module to be exported into the caller namespace.
@EXPORT_OK does export of symbols on demand basis.
"""
If this patch caused a conflict with a patch you wrote prior to its
push:
* Make sure you are not reintroducing a "use" statement that has been
removed
* "$subroutine" is not exported by the C4::$MODULE module
means that you need to add the subroutine to the @EXPORT_OK list
* Bareword "$subroutine" not allowed while "strict subs"
means that you didn't imported the subroutine from the module:
- use $MODULE qw( $subroutine list );
You can also use the fully qualified namespace: C4::$MODULE::$subroutine
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch creates a new include for showing circulation and
patron-related messages on both the checkout page and the patron detail
page. This allows the two pages to be consistent with each other.
The patch also makes some minor CSS adjustments, including the addition
of an SVG to replace an old GIF, arrow-bullet.gif.
To test, apply the patch and rebuild the staff interface CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- View both the checkout and patron details page for patrons in the
staff interface, confirming that the information is displayed in the
same way, including:
- Pending modifications
- Pending expiration
- Expired
- Address in doubt
- Card lost
- Restricted (indefinite and with expiration)
- Outstanding overdues
- Outstanding return claims
- Patron age incorrect for their category
- Outstanding charges
- Account credit
- Waiting holds (at logged-in library or other library)
- Circulation note (from borrowers.borrowernotes)
- Messages (added at logged-in library or other library)
EDIT: Fixed merge error.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We need to add the format to the forms entering new requests:
opac/opac-request-article
circ/request-article
If the pref contains multiple formats like SCAN|PHOTOCOPY, the first listed
format will be preselected on the request form. If there is only one option,
we should not disable the select however. (Possibly hide it.)
If we have no mandatory fields, we should not allow the submit of a complete
empty form (check on OPAC).
And we need to show the format of pending requests on forms:
opac/opac-user
circ/request-article (biblio detail tab)
circ/article-requests (staff form to handle requests)
members/moremember (Article requests tab at the bottom)
circ/circulation (Checkout/Article requests tab)
Note: The last two forms use the same include file.
Test plan:
[1] Add an article request via opac or staff. Choose Scan.
[2] Verify that you see the Scan format on opac-user and the
above-mentioned staff forms.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We should remove the debug statements or use Koha::Logger when we want
to keep it.
Test plan:
Confirm that occurrences of remaining occurrences of DEBUG need to be
kept (historical scripts for instance)
Confirm that the occurrences removed by this patch can be removed
Confirm that the occurrences replaced by Koha::Logger are correct
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Looks good to me, noting a few minor points on BZ.
JD amended patch: replace "warn #Finished" with "#warn Finished", and
put the statement on a single line
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch replaces a few more trivial cases where we were using
library->branchemail with a fallback to KohaAdminEmail to just use the
new library->from_email_address method directly instead.
There were also a couple of cases where we were passing borrowernumber
and the patrons library from address too.. this is unneccesary as the
code in _send_email_massage will already default to patron library from
address if we do not pass an override.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Added a semicolon.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We are using Koha::Logger when it makes sense to keep the info,
otherwise we simply remove it
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 28572: Replace missing occurrence in misc/admin/koha-preferences
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
There is a "debug" parameter we are passing from the controller scripts
to C4::Auth::get_template_and_user, but it's not actually used!
Test plan:
Confirm the assumption
Review the changes from this patch
Generated with:
perl -p -i -e 's#\s*debug\s*=\>\s*(0|1),?\s*##gms' **/*.pl
git checkout misc/devel/update_dbix_class_files.pl # Wrong catch
+ Manual fix in acqui/neworderempty.pl
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Add unit tests to cover updateWrongTransfer
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 24434: (QA follow-up) Remove tab character
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch re-instates the call to updateWrongTransfer to ensure the
transfer line is updated to reflect the new frombranch.
Test plan
note: when applying the patches, also update the database
1/ Check an item out from it's home library
2/ Check the item in at another library
(with AutomaticItemReturn system preferences enabled)
2a/ Accept the transfer and note we now have a transfer present from the
items check-in library to it's home library
3/ Check the item in at a third library
3a/ Note you are asked to return the item to it's home library.
3b/ With the patch applied, the modal title should highlight that a
'Wrong transfer' was detected.
4/ Go to the item record and note the holding library has been updated
to reflect where the item was most recently checked in.
4a/ With the patch applied the item status should reflect the last
checked in branch as the 'from' branch of the transfer.
5/ check-in from a 4th library, but use the 'Print slip' option for
accepting the transfer and confirm that also works.
6/ check-in from a 5th library, but use the 'Cancel' option and check
that this results in the item staying at it's current location and the
final transfer having been cancelled.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch sets the transfer trigger to 'Reserve' when the staff user
confirms they are transfering to fulfil a reserve.
Test plan
1 - Place a hold for delivery at Library B
2 - Sign in at Library A
3 - Browse to Circulation->Transfers
4 - Attempt to transfer an item on the title with the hold to Library B
5 - You get a notice that hold was found
6 - You have the option transfer the for the hold - click it
7 - Confirm hold is set to transit and transfer generated
8 - Check the branchtransfers table and confirm the 'reason' is
'Reserve' not 'Manual'.
Signed-off-by: David Nind <david@davidnind.com>
JK: fix typo resver -> reserve
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This moves the DestinationEqualsHolding error message addition to if
clause so the value is added to %err hash only when there is actually
an error. Then we only append to the @errmsgloop array the error
message if one was defined.
To test:
1) Create a hold request to a pickup library where the item currently
is not
2) Add transfer to the pickup library using branchtransfers.pl and
notice without this patch we get and empty message box but with this
patch we don't get it.
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch prevents the cancellations we were seeing. Transfers were
being created pre-emtively for reserves in branchtransfers before the
librarian had selected their prefered action. As such, we were getting
double lines in the branchtransfers table.
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
These patches replace the 'Waiting' button on the transfers page with a 'Transfer' button
and correct some other related problem by passing the hold object to the template and
using that to fetch patron info as well as passing the reserve_id through to ensure the correct hold is
affected at all times
To test:
1 - Place a hold for delivery at Library B
2 - Sign in at Library A
3 - Browse to Circulation->Transfers
4 - Attempt to transfer an item on the title with the hold to Library B
5 - You get a notice that hold was found (missing patron/branch info)
6 - You have the option to set the hold waiting - click it
7 - The transfer is generated and marked completed
8 - The hold is marked as waiting, but the item is still at Library A and no transfer is active
9 - The patron is notified that the hold is waiting
10 - Revert the hold or cancel and place a new one
11 - Apply patches
12 - Attempt transfer again
13 - You now have the option to transfer the hold
14 - Click that
15 - Hold is in transit and transfer is generated correctly
16 - Transfer again and choose 'cancel'
17 - Confirm hold is cancelled and transfer generated
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch removes code and markup related to an autocomplete input
field in the overdues report filter. The autocomplete was intended
to enable easy entry of patron attributes, but it's simpler to use a
Select2-styled <select>
The patch removes circ/ypattrodue-attr-search-authvalue.pl, which was
only used on this page and is now obsolete.
To test, apply the patch and create at least one patron attribute type
which is linked to an authorized value:
- Administration -> Authorized values -> New category
- Create a new category to test with
- Add multiple authorized values under this category
- Administration -> Patron attribute types -> New patron attribute
type.
- Create an attribute which is linked to the authorized value
category you created AND which is marked "Searchable."
- Go to Circulation -> Overdues.
- In the sidebar filter you should see your patron attribute as an
option, styled as a Select2 dropdown.
- Clicking the dropdown should trigger a list of the authorized
values you created above.
- Test that the search field at the top of the list works correctly
to filter the results.
- Test that any repeatable attribute field can be cloned by clicking
the "Add" link, and that cloned fields can be removed using the
"Delete" links.
- Test that cloned fields remain in place after submitting the fitler
form, and that any selected entry in a Select2 widget is
preselected.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
On bug 15422 we made it so that only holds with copies to buy to acheive the holds ratio
showed
Users have reported that they want to see record where there are 0 copies to buy i.e.
the holds ration matches the value entered
This patch changes the criteria for returning holds to be if the ratio for a given title
is equal to or greater then the ratio specified in the form
I also renamed 'ratiocalc' to 'copies_to_buy' since that is what is contains
Test plan:
1. Create bibliographic records with 1, 2 and 3 items
2. Place 1 hold on each of them
3. Go to the Hold ratios report and search with ratio = 1, 2 then 3
4. You expect to see:
the title with 1 item with ratio 1
nothing otherwise
5. Place another hold on each of the record
6. Repeat 3 you expect to see:
titles with 1 or 2 items with ratio 1
title with 1 item for ratio 2
nothing with ratio 3
7. Place another hold on each of the record
8. Repeat 3 you expect to see:
titles with 1 or 2 or 3 items with ratio 1
title with 1 item or 2 items for ratio 2
nothing with ratio 3
9. Make sure there is no regression in the test plan of bug 15422
Comments from Frank Hansen:
Some comments.
When I adding the third hold on each record in step 7, It will result in
the following result:
titles with 1 or 2 or 3 items with ratio 1
title with 1 items with ratio 2 because the title with 2 items will get
a ratio of 1.50 and not 2.
title with 1 items with with ratio 3
Signed-off-by: Frank Hansen <frank.hansen@ub.lu.se>
Signed-off-by: Galen Charlton <gmc@equinoxinitiative.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch replaces the DeleteTransfer call in circ/returns.pl with a
call to Koha::Item::Transfer->cancel.
Test plan
1/ Check an item out
2/ Add a transfer request for the item to a second library
3/ Attempt to check the item in at the first library
4/ Note that you should be given a 'WrongTransfer' modal and have to
option to cancel.
5/ Cancel the transfer
6/ Check in the database that the transfer now has 'datecancelled' set.
7/ Add a transfer for the item again
8/ From the transferstoreceive page cancel the transfer
9/ Click cancel and again check that datecancelled is set in the
database for your transfer
Signed-off-by: Petro Vashchuk <stalkernoid@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 27896: (follow-up) Fix Typo
Signed-off-by: Petro Vashchuk <stalkernoid@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch update the controller to pass a full item object to the
template instead of a subset of item fields and updates the template to
utilise the object.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Using itemBarcodeFallbackSearch entering a barcode on checkout will do a keyword
search and provide you with a list of items matching the search term for checkout.
This allows checking out items, where there is no barcode in the item (you still need
a dummy barcode in Koha).
At the moment the table of items to choose from will only chow the title and the dummy barcode.
In order to make it more useful and easier to identify the correct item,
we should show more information here:
- callnumber (952$o)
- serial enumeration (952$h)
- copy number (952$t)
- inventory number (952$i)
(description copier from comment 0)
Test plan:
- Turn on itemBarcodeFallbackSearch
(If you have ES you need bug 27597)
- Check an item out using "street" or a search that will return several
items
- Note that you have now more info about the items
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We are handling in this if-else block 3 cases:
- Hold found and waiting
- Hold found but not waiting AND whether HoldsAutoFill is enabled
- Hold found but not waiting AND whether HoldsAutoFill disabled
If we simply first handle hold found = Waiting case first then we
don't have to individually list all those other found cases and that
simplifies this code a lot.
To test:
1. Apply patch
2. Make sure HoldsAutoFill is disabled
3. Make item-level hold on branch A
4. Check-in the item at branch A and you should get pop-up confirming
the hold, ignore it
5. Set HoldsAutoFill is enabled
4. Check-in the item again and you now the hold should have been
automatically filled
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1: Turn on HoldsAutoFill setting
2: Place a item-level hold on item X at Branch A
3: Make the hold to Processing state:
$ koha-mysql kohadev
> select * from reserves; # look up the reserve_id
> UPDATE reserves SET found = 'P', priority = 0 WHERE reserve_id = XXX;
4: Check in the item X at Branch A - A pop-up asking confirmation comes
5: Apply patch & restart plack
6: Check in the item X again at Branch A - now the hold is confirmed automatically
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
bug 25690 added a new 'Transferred' status to 'ResFound', this status
needs to be handled in circ/returns.pl
To test:
1 - Place a hold on an item at Branch B for pickup at Branch A
2 - Check in the item at Branch B - confirm hold and transfer
3 - Check in the item at Branch A - nothing happens?
4 - Apply patch
5 - Checkin in the item at Branch A - hold popup appears
6 - Clear the hold and place it again
7 - Set system preference 'HoldsAutoFill' to do
8 - Check in the item at Branch B - hold is found and confirmed
9 - Check in the item at Branch A - hold is found and confirmed
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a 'Transfers to send' report to the circulation page
which displays items which have been triggered for transfer but not
marked as sent.
Test plan
1) Setup a rotation plan and add some items to it as per the
manual
2) Run the stockrotation cronjob with the --execute flag
3) Check that the expected items appear in the new 'Transfers to send'
page.
4) Confirm that items marked with 'StockRotationAdvance' provide the
option to mark the item as 'In demand' (Which will cancel the
transfer and mark the item as in demand such that it will wait at the
current branch for an additional stage period before being
automatically picke for transfer again)
5) Setup a rotating collection
6) Trigger a collection transfer for the above collection
7) Check that the expected items appear in the new 'Transfers to send'
page'.
Signed-off-by: Kathleen Milne <kathleen.milne@cne-siar.gov.uk>
Bug 22569: (QA follow-up) Rename script to snake_case
As requested, we simply rename the script, and references to it, to use
snake_case to make it clearer.
Bug 22569: (QA follow-up) Rename branchesloop to libraries
Bug 22569: (QA follow-up) Fix indentation in template
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds a new type of system preference entry option: patron
category. A preference with this type will show either a <select> with
patron categories to choose from or a multiple-select menu for choosing
one or more.
This prevents possible errors from incorrect category codes being
entered manually.
To test, apply the patch and run the database update.
- Go to Administration -> System preferences.
- Test each of the updated preferences to confirm that the available
options are correct and that your selections are correctly saved.
- Single category selections, PatronSelfRegistrationDefaultCategory
and GoogleOpenIDConnectDefaultCategory. With each of these you
should see a dropdown where you can select of all the existing
patron categories.
- Multiple selections, OPACHoldsIfAvailableAtPickup and
BatchCheckouts: These preferences should have an option for
selecting one or more system preferences at once.
- Test the pages affected by the updated system preferences:
- With BatchCheckouts enabled, confirm that the batch checkout page is
correctly limited by patron category.
- Set the OPACHoldsIfAvailableAtPickup preference to "Don't allow" and
select at least one patron category in the
OPACHoldsIfAvailableAtPickupExceptions preference.
- Log in to the OPAC as a patron whose category was not selected in
the OPACHoldsIfAvailableAtPickupExceptions preference.
- Try to place a hold on an item which is available at a library.
- When confirming the hold, the libraries where the item is available
should be disabled in the "Pick up location" dropdown.
- Repeat the process as a patron whose category was selected in
OPACHoldsIfAvailableAtPickupExceptions. There should be no disabled
pickup locations.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
PROCESSED gave the apearance that the item processing had been completed
whereas in reading the code it appears to actually signify that the item
is awaiting/in proessing state.
This patch updates the variable to be PROCESSING consistently throughout
the codebase.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This prevents checking out to a patron an item with hold to someone
else in the In Processing state via staff interface.
Also the checkout error message via SIP is now a more clearer one: "Item is
on hold for another patron." Before it was "Item cannot be issued:
$confirmation".
Also the branch transfer and batch checkout pages are adapted to this new
confirmation message as well.
To test:
1) Create bib level hold to an item for patron A
2) Check-in that item via SIP2, now the hold state should be "In processing"
3) Apply patch
4) Try to checkout the item to patron B via staff interface and
notice we get now confirmation prompt do we really want to do it
because it is in processing.
In order to not have to setup SIP2 server, alternatively steps 1) and
2) can be done so that you check-in the item in staff interface and
make it Waiting, and then with SQL change it to "In processing":
UPDATE reserves SET found = "P" WHERE reserve_id = XXX;
UPDATE reserves SET waitingdate = NULL WHERE reserve_id = XX
UPDATE reserves SET expirationdate = NULL WHERE reserve_id = XXX;
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The patch "Bug 19116: Hold not set to waiting after transfer" added a
new meaning to 'Reserved' return value of C4::Reserves::CheckReserves
function. Let's remove double usage and have separate Transferred
return value so we can differentiate between attached and non-attached
holds. This will come useful in future refactorings.
This patch does no changes to the logic except in the
/cgi-bin/koha/circ/branchtransfers.pl and circulation.pl we now give
similarly to waiting state notice about hold being transferred.
To test:
1) Apply this patch
2) Create a new item level hold so that pickup library is different
than where the item is currently. Then return the item so that hold
is being attached and transferred.
3) Go to branchtransfers.pl and try to create a new transfer: it
should prompt you with message "Item is attached to a hold and
being transferred for XXX" and provide you with option to cancel
the hold or to ignore the transfer.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Update C4::Circulation::AddReturn to use Koha::Item->get_transfer to
find requested transfers and use Koha::Item::Transfer->receipt to complete
transfer requests if they have arrived at their destination or return the
relevant 'WrongTransfer', 'WasTransfered' and 'TransferTrigger' messages
to the end user.
Signed-off-by: Kathleen Milne <kathleen.milne@cne-siar.gov.uk>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We should remove all SQL queries that contain 0000-00-00 and finally
assume we do not longer have such value in our DB (for date type)
We already dealt with such values in previous update DB entries.
The 2 added by this one haven't been replaced already.
The code will now assume that either a valid date exist, or NULL/undef.
Test plan:
QA review is needed and test of the different places where code is
modified.
Not sure about the change from reports/issues_avg_stats.pl
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Andrew Nugged <nugged@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
There is a difference between YAML::Load and YAML::XS::Load
From YAML::XS pod:
"YAML::XS only deals with streams of utf8 octets"
Test plan:
We are going to test 1 occurence and QA will confirm others don't
contain typos.
0. Don't apply the patches
1. Create a new itemtype with code=❤️
2. Create a new item using this itemtype (to biblionumber=1 will work)
3. Fill OpacHiddenItems with
itype: [❤️]
4. Search for "street shuffle" or any terms that will return the biblio
Notice that the item is there (there is an error in logs)
5. Apply the patches
6. Repeat 4 and confirm that the item is now hidden
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
From tht YAML pod:
"""
This module has been released to CPAN as YAML::Old, and soon YAML.pm will be changed to just be a frontend interface module for all the various Perl YAML implementation modules, including YAML::Old.
If you want robust and fast YAML processing using the normal Dump/Load API, please consider switching to YAML::XS. It is by far the best Perl module for YAML at this time. It requires that you have a C compiler, since it is written in C.
"""
See also
https://gitlab.com/koha-community/qa-test-tools/-/merge_requests/35
Test plan:
Try some place where YAML::XS is not used and confirm that it works
correctly
QA note: This patch removes some uses of YAML that were not useful
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
finesMode is 'off' by default (sysprefs.sql), but if you modify its value from
the UI and set it to 'production' then back to 'off', the DB value becomes an
empty string '', because of $YAML::Syck::ImplicitTyping
This has been found when working on on removing YAML::Syck (bug 22824),
so it's not perfect but the situation will be cleared in the follow-up
bug report.
Test plan:
0. Don't apply the patch
1. reset_all
=> finesMode eq 'off' in DB
2. Set the pref's value to production
3. Switch it back to 'off'
4. Value is '' in DB
5. Check an item in that should generate overdue charges
=> Charges are not generated
6. Apply the patch
7. Check an item in that should generate overdue charges
=> Charges are generated
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
