Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Agustín Moyano <agustinmoyano@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Agustín Moyano <agustinmoyano@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
If we cancel the confirmation box we should not clear all the messages
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Agustín Moyano <agustinmoyano@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Or they will be displayed again on the next view
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Agustín Moyano <agustinmoyano@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Agustín Moyano <agustinmoyano@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Agustín Moyano <agustinmoyano@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Agustín Moyano <agustinmoyano@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Agustín Moyano <agustinmoyano@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Agustín Moyano <agustinmoyano@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Agustín Moyano <agustinmoyano@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Agustín Moyano <agustinmoyano@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Looks easier to have a separate variable for the confirmation box, and
easier for styling as well.
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Agustín Moyano <agustinmoyano@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This is picking some improvements made by Agustin on bug 32607.
This patch is only a POC and we should apply this change to the
different delete route.
We will then remove the *FormConfirmDelete components, and the /delete routes
Initially I wanted to have the same behaviour as in other areas of Koha,
and have a separate view for the deletion step. But it's too much
overhead for not much gain.
Additionally we will have to remove messages.js, the aim of this file
was to import the methods to add messages very easily (only 1 import
line). Now we will need 2 lines (it was more when I added messages.js,
because I didn't inject the store). Not a big deal.
Finally, there is something weird in Main.vue we need to fix. The
console is showing a warning
"[Vue warn]: setup() return property "_is_loading" should not start with "$" or "_" which are reserved prefixes for Vue internals."
I had a hard time to display this "loading" modal when the app is
loading all the things it needs. Pinia/store is not available as we are
accessing the methods/actions too earlier. It will be good to fix that
before we decide to move forward with this approach.
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Agustín Moyano <agustinmoyano@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a new filter checkbox at the top of the agreement list
"Show only mine" that will display agreements linked with the logged in
user.
Test plan:
Create several agreements, add your current logged in user to some of
them
On the agreement list view us the new checkbox to filter the agreements
and see those where you are involved in.
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
There's a cleaner way to achieve this now using `additional_filters` and
passing a function.
This patch removes the `special:undefined` handling, replacing it with a
single field filter passed as a function via additional_filters.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the display of biblio specific concerns to the biblio
detail display page.
Test plan
1) Enable the feature as in prior patch test plans
2) Add a concern as per prior patch test plans
3) Confirm that a new tab appears at the bottom of the catalog record
details display and all functionality from the concern management
page is precent.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Helen Oliver <HOliver@tavi-port.ac.uk>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch brings the CatalogConcerns feature to the staff client
allowing non-cataloguers to report issues with catalog records from the
record details page.
Test plan
1) Enable the new `CatalogConcerns` system preference
2) Confirm that without the `edit_catalogue` permission your user can
submit a catalog concern via `New -> New catalog concern` from the
toolbar on a records detail display.
3) Confirm that the right user was recorded as the reporter on the
catalog concern management page (You must have logged in again as a
user with the `edit_catalogue` permission to see this page.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Helen Oliver <HOliver@tavi-port.ac.uk>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a catalog concern management page to the staff client
accessible via the cataloging home page and a new 'Pending catalog
concerns' link on the front page.
This includes added the requisit ticket_updates api endpoints and notice
triggers and templates for notifying patrons of changes to their
reported concerns.
Test plan
1) Enable the `OpacCatalogConcerns` system preference
2) Catalog concern management is tied to your users ability to edit the
catalog, `editcatalogue`.
3) Confirm that you can see 'Catalog concerns' listed on the cataloging
home page if you have the `editcatalogue` permission and not if you
do not.
4) Add a new concern as an opac user.
5) Confirm that once a concern is present in the system you see a count
of 'catalog concerns pending' on the intranet main page if you have
the `editcatalogue` permission.
6) Click through either the cataloging home page or pending concerns
link on the main page to view the new concerns management page.
7) Confirm the table displays as one would expect.
8) Confirm clicking on details or the concern title exposes a 'details'
modal with the option to add an update or resolve the concern.
9) Verify that if selecting 'notify' when updateing or resolving a
concern triggers a notice to be sent to the opac user who first
reported the issue.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Helen Oliver <HOliver@tavi-port.ac.uk>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Make one API call for all AV categories+values instead of one API call per AV category required
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 32981 let us retrieve the authorised values from a REST API route,
instead of injecting them from the template. Let us that for the ERM module!
Test plan:
You will notice a "Loading" screen when refreshing the ERM module
Then you should not notice any other UI changes. Dropdown list should be
populated like before this patch.
Some technical notes:
I am expecting this to be slower than before, but it feels better to use
a REST API route to retrieve the AV
Future improvement will be to lazy load the AVs, to speed up the landing
page. However it needs more changes, and this gets big enough.
I would like to see a follow-up that move the code from ERM/Main.vue to
the authorised value store (I've failed at that), but that should
certainly be done after the lazy loading is implemented anyway)
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This follow-up removes the required property from the text area as this
was missed previously.
Test plan:
1) In the ERM module, add a new agreement and observe that the Description field is required
2) Apply patch
3) Repeat step 1 but this time the Required flag will not be visible.
4) Submit the form with the Description field blank - the submission
should work
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
There is a couple of wrong things from the previous patch:
* There is a warning in the console
Firefox
[Vue Router warn]: Unexpected error when starting the router: TypeError: document.getElementById(...) is null
Chrome
[Vue Router warn]: Unexpected error when starting the router: TypeError: Cannot read properties of null (reading 'click')
That's because the tabs are not initialized yet, and so the tab is not
correctly selected when the app is loaded.
* "Search titles" is selected when on packages, and "Search packages" is
selected when on titles
This patch remove the warning and fix the second problem.
However the tab is still wrong when the app is loaded. Will see later if
that can be fixed, but it's not trivial at first glance.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch checks if responseJSON is defined before checking if
responseJSON.errors is defined.
Sponsored-by: Education Services Australia SCIS
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When you are ordering from a staged file and the
fund is missing, there is a warning:
Some budgets are not defined in item records
Budgets shoudl be funds here.
To test:
* Add a new basket
* Add an order from a staged file or from a file
* Leave the fund values of some selected items empty
* Make sure default fund entry is also empty
* Warning message should be triggered on saving
* Apply patch, repeat, verify it is correct now.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Asking to do somthing, not asking if it's being done
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This is done in a single place now!
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The previous patch didn't work, there is a validation step that make the
form non-accessible after it's greyed out.
This patch is using a new state is_submitting, like the other messages.
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
With this new ButtonSubmit component all our submit buttons will look
and behave identically.
Here we need a "submitting" information to be displayed, and the form to
be "deactivated".
This patch is a POC and use the new component on the add agreement and
delete agreement forms
Test plan:
It's easier to test if you add a sleep in the relevant place
(Koha/REST/V1/ERM/Agreements.pm for list and add/update)
Confirm that you see a "Submitting..." in the middle of the screen
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We want to make the call easier and without less errors possible.
Here, no need to async keyword, try-catch, etc.
Only call the method and use the common then with the 2 success and
error Promise arguments.
We will certainly want to add later a parameter to prevent the display
of the error in fetchJSON, in case the failure does not require a message
for the end user.
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Not used yet, will replace myFetchTotal
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
You always import the same, only once, and you can access other
resources from the same object.
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Rebase to 32806 and prior to 32925. Squash
More updates. Ready for review, for now.
JD amended patch:
* prettier
* remove changes to AgreementRelationships.vue and EHoldingsLocalPackageAgreements.vue to have less files to update in upcoming patches
Signed-off-by: Matt Blenkinsop <matt.blenkinsop@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Looks fine.
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We don't need to repeat "ERM"
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Paul Derscheid <paul.derscheid@lmscloud.de>
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 13614 removed it. On bug 31056 we noticed that one function was
still needed but we copied it in the corresponding .tt
Now this JS file is no longer used and should be removed from the
codebase
Test plan:
git grep basketgroup.js
must not return anything
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a step to the process of displaying the new audio alert
form so that focus will be set to the first field when the form has
finished appearing. The typical "focus" class only works on elements
which are present in the initial DOM when the page is displayed.
To test, apply the patch and go to Administration -> Audio alerts.
Click the "New alert" button. When the form appears cursor focus should
be on the "Selector" field.
Also test the edit process: When editing an existing alert there should
not be automatic cursor focus.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The "description" field is marked as required in the UI when creating a new Agreement. This flag has been removed to match the API where it is not a required field. Is Perpetual has not been marked as required as it is a checkbox with a default selection so will always provide a value.
Test plan:
1) In the ERM module, add a new agreement and observe that the Description field is required
2) Apply patch
3) Repeat step 1 but this time the Required flag will not be visible.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Javascript function `_` works only if used in template file (.tt or
.inc).
In .js files we should use `__`
This patch updates .js files to use `__` instead of `_`
Test Plan:
1. Do not apply the patch yet
2. Run `npx gulp po:update --lang fr-FR` (choose another language
if you prefer)
3. Open misc/translator/po/fr-FR-messages-js.po and search "Please
select a CSV (.csv) or ODS (.ods) spreadsheet file"
4. Notice that the references above only mention biblio_framework.js
5. If not already translated, translate it
6. Run misc/translator/translate install fr-FR
7. Go to staff interface and change language to fr-FR
8. Go to Administration » Authority types and click on "Actions ->
Import"
9. In the modal window, click on "Import" without selecting a file. You
should see an alert with the non-translated text
10. Apply the patch
11. Run `npx gulp po:update --lang fr-FR`
12. Open misc/translator/po/fr-FR-messages-js.po and search "Please
select a CSV (.csv) or ODS (.ods) spreadsheet file"
13. Notice that the references above now also mention authtype.js
14. If the translation is marked as fuzzy, remove the fuzzy flag
15. Run misc/translator/translate install fr-FR
16. Go to staff interface again
17. Go to Administration » Authority types and click on "Actions ->
Import"
18. In the modal window, click on "Import" without selecting a file. You
should see an alert, this time with the translated text
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Search header should change to match the section you are in.
Default is "agreement". If you are in "local titles" or "local
packages", the header will be positionned on the relevant tab.
To replicate:
1. Enable the ERM module: ERMModule system preference.
2. Go to the ERM module: Home > E-resource management.
3. Select the options from the sidebar menu (Agreements, Packages and Titles),
and note that the ERM search header options don't change.
4. Add a minimal agreement, package and title.
5. Change the search header to another option, for example 'Search titles',
then perform a search. Note that:
- the appropriate sidebar menu option is highlighted, for example: 'Titles'
- the search header changes back to 'Agreement search'
6. Apply patch, run yarn build
7. Verify the search options are now switched when moving between pages
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch replaces instances in Koha's templates where "attr('value')" is
used to get the value of a form field, using "val()" instead. This
ensures that we get the current value of the field, not just the
value of the field when the page first loaded.
To test, apply the patch and test the following pages:
- Tools -> Tags. Use the "Check lists" form in the right-hand sidebar
to test the approval status of some approved and rejected tags. It
should correctly respond with the tag's status.
- Cataloging -> Label creator.
- New -> Printer profile. Each offset and creep field should correctly
reflect the selected value in the "Units" dropdown. Changing the
dropdown should make the units change accordingly.
- New -> Label template. Perform the same tests as above.
- Tools -> Patron card creator.
- New -> Layout. If necessary, check the "Field 1" checkbox. The
units should be displayed correctly and change as you change the
"Units" dropdown.
- New -> Printer profile,
- New -> Card template: Perform the same tests as above.
- Lists -> List contents.
- Check that the "Add to" dropdown menu works for adding selected
titles to a cart or another list.
- Back record modification. Submit a batch of records for modification
and go to Administration -> Manage jobs.
- View the details of the job you just submitted.
- Confirm that the "Add modified records to the following list"
dropdown works correctly.
- Cataloging -> Find a bibliographic record -> Edit items.
- Confirm that clicking a cell in the table of existing items
triggers the "Edit item/Delete item" menu, and that these links
work correctly.
Works as described.
Signed-off-by: Alex Buckley <alexbuckley@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
... and fix cypress tests
The main problem was that there were no more checkError call for fetchLocalTitleCount
and the error was not displayed on the UI.
This commit is doing several things:
- Refactor fetch.js to call the same fetch method (myFetch) in order to
deal with the error in a single place
- Have a new myFetchTotal JS function to get the X-Total-Count header
from the response and get the benefit of the previous refactoring
- Rename fetchCountLocalPackages with fetchLocalPackagesCount to match fetchLocalTitleCount
- Use fetchLocalPackagesCount on the Package list view
- Use checkError from components using fetch directly. Ideally the could
should be moved to fetch.js and myFetch should be used.
- checkError get a new flag in parameter to ask for the response instead
of the result (ie. the JSON of the response). That's useful when we need
the response status or the headers
- Make checkError throw a proper exception to stop propation. This
modify the error we display on the UI, it's why we have the following
changes in cypress tests:
- "Something went wrong: Internal Server Error"
+ "Something went wrong: Error: Internal Server Error"
That's not ideal, we should have our own JS exception to avoid that
"Error" (coming from the toString call on the error)
Signed-off-by: Pedro Amorim <pedro.amorim@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
* Add or edit an item and add some info to the 'Serial Enumeration /
chronology' field
* Check the item out
* Verify by checking the source code or using the element inspector
that the title and enumchron have been merged into one string
* Apply patch
* Reload and verify that now the enumchron is wrapped in a span
with class="item_enumeration" matching the class in the list of
checkins
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
New column has now been changed to an enum in line with comments and the strings have been amended to be picked up for translation. The file koha-tmpl/intranet-tmpl/prog/en/includes/str/checkout_renewals.inc has been removed as the variables can be included within the javascript file.
Test plan:
1) In the database shell run "show columns from checkout_renewals;" and observe that there is currently no column for recording the type of renewal
2) Apply patch
3) In the shell run "dbic" and "perl installer/data/mysql/updatedatabase.pl" to update the database schema with the new column.
4) Create some checkouts
5) Renew some checkouts manually and observe in the database that there is now a column called "renewal_type" that will have recorded these as "Manual"
6) Create some checkouts that can be automatically renewed
7) Run the cron script in automatic_renewals.pl and observe that there are now also entries with a renewal_type of "Automatic"
8) Send a GET request to http://localhost:8081/api/v1/checkouts/1/renewals and observe that the renewal_type is now returned in the response
9) In the Item Details tab for a record, there is the "Current renewals" option which has a button to view renewals. Click on this and observe that the modal now displays the new information.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
A requirement has been requested to record whether a renewal was done manually or automatically. A column has been added to the checkout_renewals table in the database to record this and a check is now in place to determine whether the renewal was manual or automatic. The API has also been updated to reflect this new column and return the data when requested. The renewals modal view has also been updated to show what type the renewal was.
Test plan:
1) In the database shell run "show columns from checkout_renewals;" and observe that there is currently no column for recording the type of renewal
2) Apply patch
3) In the shell run "dbic" and "perl installer/data/mysql/updatedatabase.pl" to update the database schema with the new column.
4) Create some checkouts
5) Renew some checkouts manually and observe in the database that there is now a column called "renewal_type" that will have recorded these as "Manual"
6) Create some checkouts that can be automatically renewed
7) Run the cron script in automatic_renewals.pl and observe that there are now also entries with a renewal_type of "Automatic"
8) Send a GET request to http://localhost:8081/api/v1/checkouts/1/renewals and observe that the renewal_type is now returned in the response
9) In the Item Details tab for a record, there is the "Current renewals" option which has a button to view renewals. Click on this and observe that the modal now displays the new information.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
... hopefully because there is no more bug now!
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
If one starts to copy a notice but then cancels
this when pop-up is displayed, changes are still
saved. This patch fixes this.
To test:
1. Copy notice to a library where it already exists
2. Press save and then cancel when pop-up is
displayed
=> Form and changes are still saved
3. Apply this patch.
4. Repeat steps 1. and 2.
=> Form is no longer saved
Sponsored-by: Koha-Suomi Oy
Signed-off-by: ml-inlibro <marie-luce.laflamme@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
If you try to copy notice or slip to a branch which already
has that notice or slip Koha won't let you save it. Instead
pop-up saying branch already has that notice is displayed.
This patch allows users to copy and override already existing
notice or slip.
To test:
1. Find notice which exists e.g. in all branches and branch A.
2. Copy that notice, add notice screen is displayed.
3. Press save.
=> Pop-up informing that notice already exists in branch A
is displayed.
4. Apply this patch.
5. Repeat steps 2. and 3.
6. Pop-up to confirm overwrite of notice is displayed.
=> Confirm that if you press OK, notice is saved succesfully.
=> Otherwise, changes to notice should not be saved.
Also try to save the notice you tested with as a new (same code)
to branch A. Confirm that pop-up is displayed as it should be.
Sponsored-by: Koha-Suomi Oy
Signed-off-by: Nick <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1 - Add patrons with surname Fitzwilliams and Williams
2 - Enable 'PatronAutocomplete' syspref
3 - In checkout box type 'Will'
4 - You see fitwilliams first
5 - Apply patch
6 - Type 'Will'
7 - Autocomplete does not suggest Fitzwilliam, only Williams
8 - Type '%will'
9 - Fitzwilliams is suggested
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
HTTP headers can only contain ASCII characters, and it is thus
impractical to use a header for passing DB queries that could contain
non-ascii characters.
We don't need it, and should be removed.
This patch removes traces from the datatables.js files and also from
detail.tt, which had it set to false anyway.
See bug 32406 and bug 32409 for the cases in which it was being used,
and problematic.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This makes sure that the last button on the datatable controls
also has a tooltip, like the other buttons.
To test:
* Without the patch:
* Check out an item and look at the table of checkouts
* Look at the detail page of a record with at least one item
* Confirm that the 'configure' button doesn't have a tooltip appear
as a bubble like the other buttons
* Apply patch
* Restart_all and reload pages
* Make sure the styling of the 'configure' tooltip now matches that
of the other buttons
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a "page-section" container div around the main section
of administration pages which lack it.
The SMS providers page required a small change to the associated
JavaScript in order to target the right container, so you may need to
clear your browser cache to get the correct behavior.
This patch contains indentation changes, so please ignore whitespace
when looking at the diff.
To test, apply the patch and view the following pages to confirm that
the main content is contained in a white box:
- Acquisitions -> Vendor -> Contracts
- Administration -> Budgets -> Budget details -> Planning
- Administration -> Circulation desks
- Administration -> OAI sets configuration -> Define mappings
- Administration -> System preferences -> Search for
'OverDriveAuthName' -> OverDrive library authnames table
- Administration -> SMS cellular providers
- Confirm that the "Edit" buttons work correctly to show and hide the
right content.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates js_includes.inc to set a new global js variable
`defaultPatronSearchFields` with the content of the corresponding system
preference.
We then update the patron_autocomplete function to use this new global
variable and iterate in the same way as
koha-tmpl/intranet-tmpl/prog/en/includes/patron-search.inc.
NOTE: This changes the behaviour of the autocomplete from always
searching using contains on surname or firstname or starts with on
cardnumber to searching using 'contains' on any of the fields listed in
the DefaultPatronSearchFields system preference of defaulting to
'firstname,middle_name,surname,othernames,cardnumber,userid'.
Test plan
1. Ensure autocomplete still works everywhere
2. Confirm the system preference fields are being used.
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
1. Search the catalog and view a record detail page of a record with items
2. Click 'Edit items'
3. Choose one item from the list and click 'Edit'
4. The URL fragment or in-page anchor (#edititem) is appended to the end of the URL but you are not placed on it. Instead you are placed at the top of the page and must scroll down to edit the particular item.
5. Apply patch
6. Try steps 1 - 3 again, now you should be placed in the correct location (#edititem) when editing an item.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Those JS functions are no longer in use and can be removed.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We don't need to fetch 20 titles to know if there is at least one. We
should call fetchLocalTitleCount.
Note that this should be implemented for all 'List' views.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The REST API routes is configured to return the 20 first results if
_per_page is not provided. Here we want to display all the
vendors/agreements/licenses/packages in the dropdown lists.
Ideally we should implement an infinite scroll to not load all the data
at once (https://vue-select.org/guide/infinite-scroll.html)
Test plan:
Create more than 20 vendors and confirm that, with this patch, all the
vendors are display in the dropdown list displayed on the add agreement
form
Same for agreements, licenses and local packages
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Digests are not available via Talking Tech, but the artificial limit should not be in place for the non-TT phone notices. If only phone is selected, digest remains disabled.
Test Plan:
1) Apply this patch
2) Enable TalkingTechPhoneNotification
3) Verify behavior hasn't changed
4) Disable TalkingTechPhoneNotification, Enable PhoneNotification
5) Note disgest option is now selectable if only phone is selected
Signed-off-by: Evelyn Hartline <evelyn@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 31166: (QA follow-up) Remove debugging lines
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 31166: (QA follow-up) Implement on OPAC side
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Squashed by RM
The jQuery UI autocomplete is supposed to replace the text field with
the 'value' attribute of the selected item. As it does not exist it's
emptied. We should not replace what the user typed in.
Test plan:
Go to the Koha home page
Select "Search patrons" in the header
Type 'edn', it will return 1 result
Use the down key to select the item (it is not obvious but there is a
little change in the color when you select the item)
=> Without this patch the search field is emptied
=> With this patch applied the search field is not modified
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
There is a reference to it in main.js, it makes sense to include it in
our codebase
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Not sure what is going on exactly, neither if this patch is the correct
way to fix this.
The request is "rejected" at some point (by the browser?), when we
search for patrons using the autocomplete and DT "at the same time".
To recreate:
Don't apply this patch
Go to /cgi-bin/koha/reserve/request.pl?biblionumber=1&borrowernumber=5
Search for "edn" then hit enter
You may see an alert, that will disappear
If you don't see the alert, repeat
This patch suggests to ignore the alert if the status of the request is
"rejected".
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the way we retrieve a DataTable's saved state during
initialization. The change is to prevent cases where making a duplicate
call to DataTables() initializes the table again.
To recreate the bug, search system preferences for the term "last."
Scroll down to the "OPAC preferences" section and observe that there are
two filter forms displayed above it.
Apply the patch and perform the same search again. The extra forms
should be gone.
Confirm that DataTables behavior is still the same:
- Test pages which use the "saveState" option in DataTables.
- Type text in the table's search field
- Reload the page. The search field should still have the string you
entered, and the "Clear filter" button should be active.
- Administration -> Libraries
- Acquisitions -> Vendor -> Receive shipments -> Receive orders
- Circulation -> Overdues
- Test pages which don't use the "saveState" option, e.g. the checkout
screen, patron search results, list of saved reports, etc. The
behavior of the search form and table operations in general should be
unchanged.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch modifies the template for adding a record from a staged file
in order to resolve some layout problems introduced by the staff
redesign.
This patch also corrects an problem with addorderiso2709.js: It included
some template markup. The template variables are converted to a JS
variable to prevent a JS error.
Note that the QA tool's js_in_body error is invalid for this template
which requires that the JS stay inside <head>.
To test you must have at least one MARC file staged for import.
- Apply the patch and go to Acquisitions.
- Locate a vendor and create a basket if necessary.
- Add to the basket and choose the option of adding an order from a
staged file.
- Click "Add orders" next to one of the staged files.
- On the Add orders from MARC file page, test that everything looks
correct and works correctly:
- In the first tab, expanding and collapsing order details by checking
the checkbox or clicking the title.
- Test the "MARC" and "Card" preview buttons.
- Under the Item information tab, confirm that the layout looks
correct and that the form works correctly, including plugin
operations like auto barcode fill.
- Test that, under the Default accounting details tab, changing the
fund automatically sets the fund for each title in the first tab.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
From comment 0
"""
Moving marc batch import actions to background jobs has introduced some confusing
clicks to the process. Before this change, after staging a batch one was taken
to a "MARC staging results" page with details of how the staging went and, most
importantly, a link straight to the batch you'd just staged
(at manage-marc-import.pl?import_batch_id).
Now, however, one must click the status bar to get to details of the job
and then click "View batch" from there. Not only is that an extra click
and page load, but neither of those links are particularly large or
obvious.
"""
Test plan:
- Stage a record for import, notice that the "View batch" link appears
when the job is finished
- Add order to basket from a new file, select a file and import
Notice that the "Add staged files to basket" link is displayed when the
job is finished
Note for QA: We should have a js_callback in the background_job include
file instead.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When the form to add orders from a staged file is validated, we use
toptabs functionality to switch to the item tab if there are missing fields.
The display now uses bootstrap tabs, so the JS is throwing an error:
Uncaught Error: cannot call methods on tabs prior to initialization; attempted to call method 'option'
This patch simply switches the call to switch tabs
To test:
1 - Stage a file for import
2 - Either use Marc(Item)FieldsToOrder to populate the orders
or select a budget on the third tab
3 - View the second tab, items info, confirm itemtype is required, but don't populate it
4 - Attempt to save order, nothing happens
5 - Check the JS console (F12)
6 - Note the error:
Uncaught Error: cannot call methods on tabs prior to initialization; attempted to call method 'option'
7 - Apply patch
8 - Cancel and add from staged file again
9 - Select a budget and save
10 - You now get an error popup: Some required item subfields are not set
11 - Confirm after the error you are shown the items tab
12 - Select itemtype
13 - Save
14 - Confirm orders added successfully
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We shouldn't change the current route (which will lead to change the
view) when we are adding an agreement to a EBSCO's package
Test plan:
Go to E-Resource management / eHoldings / EBSCO / Packages
Search for a package, select one
Click "Add new agreement"
Use the "Filter by expired" filter
=> Without this patch you are redirected to the package list view
=> With this patch applied the table is filtered as expected
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In the header, if "Search catalog" is selected, there is an "option"
icon to display some filters.
Fitlers are displayed if IntranetCatalogSearchPulldown or
IntranetAddMastheadLibraryPulldown is set. If none are set we should
hide the icon to avoid and empty div to be displayed
Test plan:
Confirm that the icon is only displayed if one of the 2 prefs is turned
on.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This param is not defined in routine, who knows whereit comes from
To test:
1 - Enable coce and coce intranet, select all providers:
https://coce.bywatersolutions.com
2 - Search on staff client
3 - Click Z3950 search
4 - Note url contains a random biblionumber
5 - Apply patch
6 - Repeat
7 - No biblionumber
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When e- is used as prefix, the second word should not
be capitalized. And when e-resource-management is used
as part of a sentence, the e shouldn't be either.
See: e-mail, e-commerce. etc.
To test:
* Best to check the code... but:
* All E-Resource should now read e-resource or E-resource, as on:
* Koha start page
* Breadcrumbs in the ERM module
* Descriptions of AV categories...
I chose to update the sysprefs.sql and the DB update as well
as this hasn't been released yet.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Bug 32147: (follow-up) Fix missing space
One of the AV category descriptions was missing a space
before the (e-resource management).
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We missed the page-section addition when ERM was updated for the new UI
prior to push.
Test plan
1) Start a koha-testing-docker
2) Build the ERM module with 'kshell > yarn install > yarn build_js'
3) Enable the ERM module via the system preferences
4) Enable both 'EBSCO' and 'Local' as providers
4) Check the following pages
* ERM > Agreements
* ERM > Licenses
* ERM > eHoldings > Local > Packages
* ERM > eHoldings > Local > Titles
* ERM > eHoldings > Local > Titles > Add from a list
* ERM > eHoldings > EBSCO > Packages
* ERM > eHoldings > EBSCO > Titles
5) Apply this patch
6) Build the app again 'yarn build_js'
7) Confirm page-sections appear as expected on the pages mentioned in
step 4.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch set implements item editor templates for community Koha.
Test Plan:
1) Apply this patch set
2) Run updatedatabase.pl
3) Restart all the things!
4) prove t/db_dependent/Koha/Item/Template*
5) As a non superlibrarian, enter the item editor
6) Set some item fields, save as a new template using the buttom and
form below the editor.
7) Test loading a template without remembering for the session
8) Test loading a template while remembering for the session
9) Test deleting a template
10) Test updating a template
11) Create one or more shared templates
12) Log in as another non superlibrarian without the new permission manage_item_editor_templates,
verify you cannot edit/delete templates shared to you
13) Enable the new permission manage_item_editor_templates,
verify you can now edit and delete templates shared to you
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Quick & dirty fix, this is not very nice and can be improved
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Caused by 31943.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Fix "Filter by expired" returns 400 when no date provided
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To prevent the cypress test to fail random, and it also remove a blink
code/value in the dropdown list, which is nicer for the end-user.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This is needed by the following cypress tests
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The plan was to rewrite the whole history, but it failed
(see https://tree.taiga.io/project/joubu-koha-erm/us/129)
yarn run prettier --trailing-comma es5 --semi false --arrow-parens avoid --write **/*.vue
TODO - Add a QA check + git pre-commit hook
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We had "home/main page" for eholdings, eholdings/local and
eholdings/ebsco. They only contains a list for links we can find in the
navigation menu on the left.
This patch suggests to remove them, and adjust the style of the links to
make them non-clickable.
In the breadcrumb, on E-Resource managemente / eHoldings / Local / Titles
=> Holdings and Local will be black, without cursor on hover
In the nav menu, eHoldings, EBSCO and Local are not clickable and black.
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Agreements - fa fa-check-circle-o
Licences - fa fa-gavel
eholdings - fa fa-crosshairs
EBSCO - fa fa-globe
Local - fa fa-map-marker
Packages - fa fa-archive
Titles - fa fa-sort-alpha-asc
E Resource Management - fa fa-fw fa-external-link-square
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
See https://tree.taiga.io/project/joubu-koha-erm/us/108 for details
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Aborted (core dumped)
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The previous implementation was using vue-i18n inject localized strings
into the Vue app. However it was using json files, and we needed
additional overhead to convert from/to PO files.
I've also tried vue3-gettext that use PO, but the overhead to work with
our workflow was existent as well (see branch joubu/vue3-gettext).
vue-i18n-extract was using for extracting, and a specific misc script
(misc/translate_json.pl) was also used to generate the json file. They
can be removed.
Here we are simply reusing our existing workflow, and we will improve it
(ie. make it more vue-ish) later if we need it.
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Might be improved a bit more
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Typo in fieldset id
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Uncaught Error: [🍍]: getActivePinia was called with no active Pinia. Did you forget to install pinia? const pinia = createPinia() app.use(pinia) This will fail in production.
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In case there are more than one message.
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Solution found at: https://stackoverflow.com/a/65346965/3594153
If we install new version of the packages, we got the following error in
the console:
Firefox - Uncaught TypeError: app is undefined
Chrome - Cannot read properties of undefined (reading 'config')
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
- Added API specs for new field 'notes' for erm_holdings_package;
- Added new field 'notes' in DB schema for erm;
- Added new field 'notes' in Vue.js frontend
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Fix the following error:
Module not found: Error: Package path ./dist/vue-select.css?vue&type=style&index=0&lang=css is not exported from package /kohadevbox/koha/node_modules/vue-select (see exports field in /kohadevbox/koha/node_modules/vue-select/package.json)
@ ./koha-tmpl/intranet-tmpl/prog/js/vue/main-erm.ts 11:20-59
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
For consistency, it's not needed.
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Why has this been added? At first glance we don't need it!
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Same as packages, but for titles here.
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Add an "Add to holdings" and "Remove from holdings" buttons on the
resource page.
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Warning messages are displayed when a form is not submited because
something is wrong on the form.
We should notify the user on the visible screen, not at the top of the
form that could be hidden.
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a checkbox and flatpickr input to filter agreements by
expiration date.
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We noticed on "Create eHolding titles from a list" that the wrong row
could be used: api.row(index) does not return the rows ordered how they
are on the screen.
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Add the ability to create new titles and attach them to a package.
The MARC to KBART2 mapping is the following (based on
https://github.com/adambuttrick/marc_to_kbart/blob/master/convert.py):
publication_title = biblio.title
print_identifier = 020$a||020$z||022$a||022$y
online_identifier = 020$a||020$z||022$a||022$y
date_first_issue_online = 866$a (before '-')
date_last_issue_online = 866$a (after '-')
num_first_vol_online = 863$a (before '-')
num_last_vol_online = 863$a (after '-')
num_first_issue_online = ?
num_last_issue_online = ?
title_url = 856$u
first_author = biblio.first_author
embargo_info = ?
coverage_depth = title_url ? 'fulltext' : 'print'
notes = $852$z
publisher_name = 260$b
publication_type = ?
date_monograph_published_print = ?
date_monograph_published_online = ?
monograph_volume = ?
monograph_edition = ?
first_editor = ?
parent_publication_title_id = ?
preceeding_publication_title_id = ?
access_type = ?
Note that title is not created (and so the resource) if a title from
this package already has a link to this bibliographic record.
Is that correct, or should we create another resource?
Should the import screen also have "start date" and "end date" to set for the
resource?
QA note: Ideally we would like to fetch the list from the REST API but the routes
are not there yet.
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Not the breadcrumb
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
* Align inputs, textareas and selects
* Use vue-select for dropdown lists
Note that the only way I found to make the select required is to follow
what is on their doc https://vue-select.org/guide/validation.html#required
However we need our own vue-select-required component to avoid the
repetition (the #search slot). I've tried (but failed) on
https://gitlab.com/joubu/Koha/-/commits/erm-v-select-required
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
ALTER TABLE erm_agreement_licenses DROP FOREIGN KEY erm_licenses_ibfk_1;
ALTER TABLE erm_agreement_licenses DROP FOREIGN KEY erm_licenses_ibfk_2;
ALTER TABLE erm_agreement_licenses ADD CONSTRAINT `erm_agreement_licenses_ibfk_1` FOREIGN KEY (`agreement_id`) REFERENCES `erm_agreements` (`agreement_id`) ON DELETE CASCADE ON UPDATE CASCADE;
ALTER TABLE erm_agreement_licenses ADD CONSTRAINT `erm_agreement_licenses_ibfk_2` FOREIGN KEY (`license_id`) REFERENCES `erm_licenses` (`license_id`) ON DELETE CASCADE ON UPDATE CASCADE;
ALTER TABLE erm_licenses ADD COLUMN vendor_id INT(11) DEFAULT NULL AFTER license_id;
ALTER TABLE erm_licenses ADD CONSTRAINT `erm_licenses_ibfk_1` FOREIGN KEY (`vendor_id`) REFERENCES `aqbooksellers` (`id`) ON DELETE SET NULL ON UPDATE CASCADE;
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Document - don't send file_content when fetching a document
apt install libmojolicious-plugin-renderfile-perl
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Use the Composition API to have this destroy code in a single place.
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
First author + first editor
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It was not possible to select the blank value and submit the form
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Otherwise the DT's headers where duplicated. We must destroy DT when we
unmount the component.
Edit: Hum maybe not!
Looks like the bug still exists if `yarn build_js` is used instead of
`yarn watch_js`!
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We need to adjust our DataTable first
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When a new resource is created we create a new bibliographic record in
Koha that is linked at the title level
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The previous change was not working, we need to define a render function
to prevent a DT error.
"Requested unknown parameter 'me.agreement_id,me.name' for row 0, column 0"
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Note that we are adding an extra space for id and counter, otherwise
they got removed in favor of the "simple" string.
{ Agreement: Agreement }
replaced
{ Agreement: { id: ..., counter: ... } }
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
At this point we renamed eHoldings to Titles and eHoldings-package to
Resource.
Packages, resources and titles are now under the eholdings namespace.
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
* Remove ":" from the translation to prevent duplication string
* Add a script to auto-translate the strings in English
echo "{}" > koha-tmpl/intranet-tmpl/prog/js/vue/locales/en.json
npx vue-i18n-extract --vueFiles 'koha-tmpl/intranet-tmpl/prog/js/vue/**/*.?(js|vue)' \
--exclude koha-tmpl/intranet-tmpl/prog/js/vue/dist/main.js \
--languageFiles 'koha-tmpl/intranet-tmpl/prog/js/vue/locales/*.json' \
--add --remove
perl misc/translate_json.pl | sponge koha-tmpl/intranet-tmpl/prog/js/vue/locales/en.json
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Please enter the commit message for your changes. Lines starting
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Getting Uncaught (in promise) TypeError: order_by.split is not a function
Because data is an array: "data": ["me.package_id", "me.name"],
If we modify it with "data": "me.package_id:me.name",
(what we are using in other places) we are getting the following warning
when the table is init:
"Requested unknown parameter 'me.package_id:me.name' for row 0, column 0. For more information about this error"
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
'<' was displayed as '<'
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Make the string translatable
To update the json files:
npx vue-i18n-extract --vueFiles 'koha-tmpl/intranet-tmpl/prog/js/vue/**/*.?(js|vue)' --exclude koha-tmpl/intranet-tmpl/prog/js/vue/dist/main.js --languageFiles 'koha-tmpl/intranet-tmpl/prog/js/vue/locales/*.json' --add --remove
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This needs to be continued...
* show view
* download the documents
* don't embed the document content
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
And improve breadcrumb
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In case one option is "0"
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We want the whole erm.pl to be a Vue app \o/
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Object { message: "Expected application/json - got text/plain;charset=UTF-8.", path: "/body" }
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
See also "Bug 30063: Be more flexible for filters"
This is ugly, we must improve that.
I would want to prevent 1 fetch per column however.
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The column visibility broke the tr filters
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Do not sort when the filter th is cliqued
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
And add a whitespace between them.
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We are mocking the REST API routes responses here, we could do better,
but it's a nice first step.
To run the tests:
From the host (ie. *not* inside ktd): `yarn run cypress open`
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
We are lacking behind, Koha is using Bootstrap 3.5 and BootstrapVue3 is
using Bootstrap 5. It's a shame, it would be much easier to use
BootstrapVue!
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
First, `yarn install`.
Then use `yarn build_js` or `yarn watch_js` to regenerate the dist/main.js file
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Same as from bug 30225 and bug 30160
This really needs to be on its own bug...
Signed-off-by: Jonathan Field <jonathan.field@ptfs-europe.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
* Fixes a single to a double underscore for translation in holds.js
* Fixes item_group to item group in API description
* Fixes volume hold to item group hold in syspref db descrpitions
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Rebecca Coert <rcoert@arlingtonva.us>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
For example, if you filter by global search input a datatable which saves its previous state when you want to return to this datatable, the backup is recovered in a cookie but the "clear filter" button is disabled because for it the input is empty, the verification of the recovery of the cookie not being made.
When loading I therefore added the verification of the cookie and if the search value is not empty then the button can be activated.
Test plan:
1) Be sure to have some orders and baskets which can be received
2) Go to 'cgi-bin/koha/acqui/booksellers.pl' and click on 'Receive
shipments'
3) Enter something in global search
4) Go to receive and cancel or save to be back on datatable
5) See that you cannot remove your previous input by the 'clear filter'
button
6) Apply this patch
7) Repeat steps 3) and 4)
8) See that now you can remove your search
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
https://bugs.koha-community.org/show_bug.cgi?id=31881
This patch updates the style of DataTables buttons (columns, export, and
configure), in cases where the buttons are the only control being
displayed (no page controls, filter, etc).
To test, apply the patch and rebuild the staff interface CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- Go to Circulation and check an item out to a patron.
- If necessary, click the "Show checkouts" button to reveal the table of
checkouts.
- The "Columns," "Export," and "Configure" controls should look the same
as they do in other situations, with no button-style border.
- Go to Circulation -> Check in and check in the item. The table of
checked-in items should show the same style controls.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes changes to CSS and to the default DataTables DOM
configuration in order to make toolbars work better at various screen
widths.
The patch also makes stylelint corrections to _tables.scss.
To test, apply the patch and rebuild the staff interface CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- Test pages in the staff interface where tables contain multiple pages
of results, e.g. a patron search.
- Confirm that table information (entries) and controls look correct.
- Confirm that all controls work correctly, including the search field.
- Resize your browser to check how the controls respond at various
browser widths.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test translation:
1. Apply patch and update your po files using:
https://wiki.koha-community.org/wiki/Translating_Koha#Updating_the_po_files_in_your_installation
2. Verify the string appears in po files now and translate it
3. Install the language
To test functionality:
1. Turn on recalls
1.1. In Administration > Global system preferences, enable UseRecalls
1.2. Add recalls permissions in your circulation rules
2. In the OPAC, log in as a patron
3. Find a record with checked out items and place a recall
4. In the intranet, go to the patron file of the patron who currently has that item checked out
--> In the Checkouts table at the bottom of the page, there is a red message next to the recalled title
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the checkout and patron details pages, updating
jQueryUI tabs to Bootstrap tabs.
To test, apply the patch and rebuild the staff interface CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
Go to Circulation -> Check out and load a patron record for checkout.
Ideally the patron record should have a variet of data associated with
it:
- Checkouts
- Relative's checkouts (if patron is a guarantor or guarantee to
another patron with checkouts)
- Holds
- Article requests
- Claims
- Restrictions
- Clubs
On the patron's checkout page, test the various tabs corresponding to
the features listed above. Having data to display in those tabs helps
confirm that any table functionality triggered by the tab activation is
working correctly.
The checkouts tab should work correctly whether you have "Always show
checkouts immediately" checked or not.
Test that you can pre-select any tab by appending its anchor to the URL,
e.g.:
/cgi-bin/koha/circ/circulation.pl?borrowernumber=123#reserves
Perform the same checks on the patron details page.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
What this patch does:
- change the navigation bar style
- change the breadcrumbs style
- change the "last borrower" link style
- move the search bar inside the navigation bar
- move the help link to the same row as the breadcrumbs
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Edit a biblio record
2. Go to tab 9 to find the item type MARC field 942$c
3. Click on the field to select an item type
4. Notice you have to click again on the search field to begin typing to search
for your item type
5. Apply patch/clear browser cache
6. Try steps 2-3 again, the focus should now be on the search text field
7. Try another select2 dropdown on the same page like the 942$n ( Suppress in
OPAC ), it should also default to the text search field.
8. Try other places in Koha that feature this kind of select2, like when
placing hold.
Note: Using $(document).on here instead of $(".select2").on becuase there are
several instances where there are more than 1 select2 dropdown on a single page.
This allows for the text search field to default each time you click on a
different dropdown.
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Added command line ooption logging and completion logging where
cronlogaction was already imported. We should probably standardize all
cronjobs, but this is a start
One cron didn't log on confirm, likely we need to update all crons to log
if confirm, and possibly not log if running in test mode? Another bug as well
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It would be nice if we had progress bars to indicate the progress of background jobs for scripts that utilize them.
This patch implements a reusable bootstrap based progess bar.
Test Plan:
1) Apply this patch
2) Stage a marc batch ( preferrably a large one to show the progress updating )
3) Note the new progess bar, verify it functions correctly.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes the contents of the MARC preview for authority search
results visible.
To test:
1) Go to the Authorities page in the staff interface
2) Click Submit to do a search
3) Click on Actions to the right of an authority
4) Select MARC preview
5) Observe that the modal appears empty
6) Apply patch
7) Hold down the shift key when you reload the page, clear the cache,
or use another web browser
8) Do another authority search and look at a MARC preview
9) Observe that the MARC preview contains the MARC record
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Problem with items restricted edition, restriced fields with a drop-down
menu are not stored, since 21.11.
This comes from a change by Bug 28445 in items edition form :
<select name="field_value"
change to :
<select name="[% kohafield | html %]"
This breaks the special JS code :
fc919fc796/koha-tmpl/intranet-tmpl/prog/js/cataloging_additem.js (L112)
I propose we use "select.input_marceditor".
Test plan :
1. A librarian with 'edit_items_restricted' permission set
2. Item subfield not authorized for editing (SubfieldsToAllowForRestrictedEditing). In Marc framework, this subfield is linked to an authorized value (= drop-down menu). For exemple homebranch.
3. When adding/editing item, this subfield has a default value from drop-down menu and is not editable (OK).
4. Save item
=> Without patch : the subfield is empty, it should have the value from drop-down menu.
=> With patch : the subfield is saved with the value from drop-down menu.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In the patron account in the staff interface, all amounts in the
checkouts table should be formatted according to the CurrencyFormat
system preference setting.
To test:
* Edit some items, setting the replacement cost
* Make sure one of the item type is set to charge a rental charge
* Check out items
* Verify the checkouts table displays on both checkouts and details
tabs correctly
* Try different settings of CurrencyFormat and verify all amounts
display correctly
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch replaces the obsolete .on("hover") with .on("mouseenter
mouseleave"). This will allow the code to work again following the last
jQuery upgrade.
See Bug 20217 for discussion of the original implementation:
https://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=20217#c14
To test, apply the patch and go to the staff interface. Hover your mouse
over the "Search" link in the header menu. The adjacent dropdown menu
button should have its hover state triggered.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Escaping \ yields no results when performing exact search in datatables.
This patch adds MySQL special character escaping only to LIKE searches.
To test:
1. Add following categorycode 'TEST\CAT' by SQL
insert into categories (categorycode,description) values ('TEST\\CAT', 'TEST\\CAT');
2. Add a patron into TEST\CAT category
3. Go to patron search
4. Limit search by category TEST\CAT
5. Observe no results
6. Apply patch
7. Refresh patron search page
8. Limit search by category TEST\CAT
9. Observe Koha redirecting you to patron you chose in step 2
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. Add a new patron category with categorycode 'TEST_CAT'
2. Add a patron to category 'TEST_CAT'
3. Go to Patrons search view
4. Under "Search for patron" filters, filter by category you created at step 1
5. Click Search
6. Observe no results
7. Apply this patch and reload
8. Repeat 3-5
9. Observe expected result
Double check tests from Bug 30393 still work as expected:
10. Go to the cities page
11. Add two cities:
- 'Cordoba %'
- 'Buenos Aires _'
- 'London \'
12. Use the column search on the name, alternating _, \ and % as the query
=> SUCCESS: Filtering works correctly!
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
1. In batch item deletion and batch item modification add some
barcodes.
2. Notice they are being sorted by item number, not in the order
scanned.
3. Appply patch and restart services.
4. Try scanning items again in both batch item deletion and batch item
modification.
5. The found barcodes should now sort by order scanned.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a check for table_settings to prevent the display of
'Configure this table' when table settings are not passed to the
datatable wrapper.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Suggested test plan:
* Without patch:
* Go to Administration > SMTP servers
* Verify the configure button shows, but doesn't work
* Apply patch
* Reload the SMTP servers page
* The configure button will no longer show
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The multiple systempreferences are always defined as an empty array at
the minimum, so in order to determine whether we need to remove all
the selections from the systempreference we should check whether the
array is empty and not whether the array doesn't exist.
To test:
1) Set at least 1 value for OPACHoldsIfAvailableAtPickupExceptions
2) Remove all the values for OPACHoldsIfAvailableAtPickupExceptions
and notice you get the message "Nothing to save"
3) Apply patch and repeat, removing all the values should work now.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds UI to allow CRUD operations on restriction types
Sponsored-by: Loughborough University
Signed-off-by: Benjamin Veasey <B.T.Veasey@lboro.ac.uk>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Some errors are not passing settings and so the error is hidden
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Especifically when timeformat=12h
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The idea rely on the KohaDates TT plugin for the date formatting. We
should not have any output_pref calls in pl or pm (there are some
exceptions, for ILSDI for instance).
Also flatpickr will deal with the places where dates are inputed. We
will pass the raw SQL value (what we call 'iso' in Koha::DateUtils), and
the controller will receive the same value, no need to additional
conversion.
Note that DBIC has the capability to auto-deflate DateTime objects,
which makes things way easier. We can either pass the value we receive
from the controller, or pass a DT object to our methods.
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes adding multiple items on order acquisitions
The error is: Uncaught TypeError: $(...).parent(...).attr(...) is undefined
Test plan:
1) Set dateaccessioned.pl plugin to ACQ framework's 952$d field.
2) Create basket to a vendor and add order from a new empty record.
3) Add date acquired value from calendar.
4) Add multiple items and see that the view freezes.
5) Apply the patch
6) Reload the page and repeat the steps 3 and 4.
7) See that the items are added.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
JD Amended patch: adjust commit title
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This page utilises the Additional Contents feature to add custom pages
to the staff client and the OPAC in the user's desired language.
To test:
1. Apply patch and restart services
2. In the staff client, go to Tools, then go to the new 'Pages' page
3. Add a new page to display on both the staff client and OPAC.
4. Confirm the URLs in the Page URL column work as expected.
5. Confirm that any pages made for the staff client only do not show in
the OPAC, and that any pages made for the OPAC only do not show in the
staff client.
6. Confirm that pages do not show on the OPAC main page where news items
show. Confirm news items show on the OPAC main page as expected.
Sponsored-by: Chartered Accountants Australia and New Zealand
Signed-off-by: Thibault Kero <thibault.keromnes@univ-paris8.fr>
Signed-off-by: Lisette Scheer <lisettePalouse+Koha@gmail.com>
Signed-off-by: Lisette Scheer <lisettePalouse+Koha@gmail.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Adds "relatives-issues-table" in table settings.
Test plan:
1- Apply the patch
2- Check out an item to a patron with a guarantor
3- Go to the guarantor's "details" and "check out" page > relatives'
checkouts and look at the different columns (you should see collection
and location)
4- Go to
admin > table settings > patron > moremember > relatives-issues-table
or
admin > table settings > circulation > circulation >
relatives-issues-table
to hide some columns (e.g. collection and location) and click save
5- Do step 3 again and notice some columns (e.g. collection and location) are hidden
6- Also notice the "Columns" and "Export" buttons that should work as
intended
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch enabled scrolling directly to the correct table configuration when clicking the 'Configure this table'
button from any KohaTable/kohaTable table in Koha.
Test plan
1. Navigate to Administration > Cities
2. Click 'Configure this table'
3. Confirm the result is the table settings page and you are scrolled to
the cities table configuration
Signed-off-by: Andrew <andrewfh@dubcolib.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch makes the button text translatable. Whilst we're here I also added a wrench icon,
set the title attribute and added a class.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Andrew <andrewfh@dubcolib.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch suggests to have a "Configure table" button when a table can
be configured in the "Table settings" administraition area.
Test plan:
Go to different views where the table can be configured (you an
exhaustive list on bug 29648), notice the "Configure table" button (if
you have the 'manage_column_config' subpermission.
Note that the link is correct but the scrollbar is not adjusted at the
correct position. Maybe we could improve that switching to the bootstrap
accordion plugin?
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Andrew <andrewfh@dubcolib.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds additional grouping to the cashup summary output such
that payouts are additionally grouped by the types of debit they're
applied against. The cashup sumary modal is adapted to expose the
descriptions at the grouping level too.
Test plan
1/ Add a various transactions using a cash register (Using Point of
Sale, Patron Accounts with payments etc).
2/ Refund some of the debts and pick the 'cash' option for payout.
(ensure you pick a variety of debit types)
3/ Add some credit to a patron account, (either refund a debt as
'credit' or add a 'manual credit')
4/ Payout the credit as 'cash' on the patron account
5/ Cashup the register
6/ Inspect the cashup summary for your cashup.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch modifies the patron search results page to enable checkbox
selections to be remembered in the browser's localStorage. This allows
checkbox selections to persist while navigating through multiple pages
of search results or even across multiple different searches.
Once selected, these values can be added to a patron list or submitted
for merging. Selections can be cleared manually and will be
automatically be removed upon logout.
To test, apply the patch and rebuild the staff interface CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- In the staff interface perform a patron search in the Patrons module
which will return multiple pages of results..
- Check checkboxes next to several patrons.
- After one checkbox is checked the "Add to patron list" button should
be enabled.
- After more than one checkbox is checked the "Merge selected patrons"
button should be enabled.
- A box should appear in the toolbar above the search results, "Patrons
selected: X"
- Navigate to another page of results. Check more checkboxes. The
"Patrons selected" information should be updated.
- Return to the first page of results. Your original selections should
still be checked.
- Test that the correct set of patrons is used when clicking "Merge
selected patrons" or when using "Add to patron list."
- Click the "Clear" button in the selections information box. Checkboxes
should be cleared on every page of results you previously checked.
- The "Add to patron list" and "Merge selected patrons" buttons should
become disabled.
- After making several selections, log out of the staff interface and
log back in, returning to the same patron search. Your selections
should have been forgotten.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch displays the column "Return claims" from the page "moremember.pl" to the page "overdues.pl". Rebase on master.
Test plan:
1) Use a patron with at least 1 item who should be checked out soon
2) Home > Patron > Patron details for [name]
3) Click on the 'Checkout' button down the page to show the full table and notice the "Return Claims" column
4) Now go to Home > Circulation > Overdues
5) Find the patron who has to check out and have a look at the table
6) Apply patch and repeat 4) and 5) -> the "Return Claim" column is now displayed on the table
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Make the message deletion confirmation popup translatable. Test plan
uses fr-CA translations.
Test plan:
1) Switch language to french (fr-CA)
If you do not have the translations, go to
misc/translator
then do
./translate install fr-CA
After it is done, go to administration > global system preference >
l18N/L10N then select Français (fr-CA) under language preference.
Refresh then you should be able to switch languages.
2) Add a message to a patron account from your own branch (or make sure AllowAllMessageDeletion is on)
3) Click "Delete" next to the message
--> a confirmation message appears "Are you sure you want to delete this message? This cannot be undone." with options "Cancel" and "OK".
4) Apply the patch
5) Write a translation in misc/translator/po/fr-CA-messages-js.po :
msgid "Are you sure you want to delete this message? This cannot be undone."
msgstr "Êtes-vous sûr de vouloir supprimer ce message? Cette opération est irréversible."
6) Refresh the translations by going to misc/translator and execute ./translate install fr-CA
7) Refresh and click "Delete" again
--> now the confirmation message is "Êtes-vous sûr de vouloir supprimer ce message? Cette opération est irréversible." with options "Cancel" and "OK"
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
1. Add some patron attributes that are textarea and some that have an AV category so they are select dropdowns
2. Go to the patron form and add some values to the patron attributes
3. Use the "Clear" button to try and clear the values, doesnt work.
4. Apply patch
5. Try clearing values from patron attributes that are both select dropdowns and textarea. The "Clear" button should work.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates addorderiso2709.tt so that it uses Bootstrap tabs
intead of jQuery.
The patch contains indentation changes, so diff accordingly.
To test apply the patch and go to Acquisitions -> Vendor -> Basket ->
Add to basket -> From a staged file.
- Click "Add orders" next to the staged file you want to use.
- On the "Add orders" page, test that the tabs work correctly.
Signed-off-by: Séverine Queune <severine.queune@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
DataTables is not raising error to the end user, it's only displaying a generic message in the console.
This leads to lot of questions on IRC or the mailing list ("the table is empty").
We can do better and display what went wrong.
We could also imagine add a link to the wiki for the more common problems (won't be implemented here however).
Test plan:
Revert "Bug 31104: Put each link on a separate header" and search for a
patron using a very long string
You should get an alert with the reponse of the server.
In my case:
"""
Something went wrong when loading the table.
414: Request-URI Too Long
"""
You can also make the REST API returns a 500 (bad specs or simply with a
die statement).
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
As talked with Martin, this patches were originally developed before we
added the modals/ and str/ dirs, but we need to align it with current
way of doing it. This patch does that.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the renewals modal to correctly format the staff
member who renewed the checkout.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the display of the renewals modal when appropriate. A
"View" link is displayed next to renewals count where appropriate.
Clicking the link opens the modal that displays the logged renewals.
Sponsored-by: Loughborough University
Signed-off-by: Myka Kennedy Stephens <mkstephens@lancasterseminary.edu>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Bouzid Fergani <bouzid.fergani@inlibro.com>
Signed-off-by: Ben Veasey <B.T.Veasey@lboro.ac.uk>
Rescued-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
I rescued this patchset by squashing previous work and updating it to
utilise the new renewals API routes introduced in bug 30275.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1. Make sure you have mandatory item subfields in the MARC bibliographic
framework used in acquisitions ("ACQ" if it exists, the default framework
otherwise).
2. Use the "Stage MARC records for import" tool to upload a file. Do not import
the bibliographic records.
3. Create a new acquisition basket ("Create items when:" must be set to
"placing an order") and add a new order from a staged file
4. Select the file you just uploaded
5. In the "Items information" tab, make sure at least one mandatory subfield is
empty
6. Try to submit the form. If there are errors about other mandatory fields
(like the fund for instance), fix those errors and resubmit. There should be
an error message about mandatory item subfields.
7. Enter a value for the mandatory item subfields and resubmit the form. Verify
that the order and the item have been correctly created.
Signed-off-by: Thibault Kero <thibault.keromnes@univ-paris8.fr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Prevent a blink
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch modifies the form for adding a new subscription so that the
collection and item type fields are shown only when the subscription is
configured to create an item when receiving.
To test, apply the patch and go to Serials -> New subscription.
- When the page first loads, the "Do not create an item record when
receiving this serial" radio button should be selected.
- Under the "Location" field there should be no item type or collection
field.
- Select the "Create an item when receiving this serial" radio button.
- The item type and collection fields should appear.
- Test that the values are correctly saved when you add or edit a
subscription.
- If you edit a subscription which had item type and collection defined,
and you switch to "Do not create an item..." the record should save with
empty values for those fields.
- Confirm that existing subscriptions open with the correct settings
applied: Only records with "Create an item..." checked should open
with the item type and collection fields displayed.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It was a IE fix apparently
commit f021b52e71
Bug 11703 [QA Followup] - Stop IE from caching ajax request
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes the circ/ysearch.pl script used by the jQuery autocomplete widget.
We can now use the /api/v1/patrons endpoint to retrieve the patrons and
generate the patron result list.
Prior to this patch the different occurrences were defining the style
and the list of patron's attributes to display for each option (name,
date of birth, age, address, etc.). Now they are all displaying the same
information.
To acchieve this we had to:
* Make js-date-format.inc and js-patron-get-age.inc available from js_includes.inc
and so available from everywhere, which is certainly a good move. We
could discuss why this code is in include file instead of JS files
however.
* Remove the .ajaxSetup call in tags-review.js to reduce its scope: an
underscore parameter was added to the REST API query (?)
A better solution would have been to extend the existing widget
(https://learn.jquery.com/jquery-ui/widget-factory/extending-widgets/)
but I didn't manage to do it, and I feel like there is a bug in jQuery
autocomplete. The "source" was not taken into account.
We could think about replacing the jQuery autocomplete with something
else, but that's outside the scope of this bug.
Test plan:
Search for patrons and confirm the autocomplete works and that the
"select" action works as before (either a redirect or select the
patrons) on the different views:
* Place a hold
* Search for tags (form on the left)
* In the header, "Check out" and "Search patrons"
* Add instructors to course reserves
* View logs (the "librarian" input)
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
cashup_modal.js consists only of jQuery code, so the whole thing should
be contained in a $(document).ready() function. This may or may not be
contributing to the behavior this bug is trying to fix.
Please note that this patch contains whitespace changes, so diff
accordingly.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
During cataloging a user may wish to add an item to a group when
creating a new item
This patch also copies the group description to the enumchron field
To test:
1 - Browse to details page for a record
2 - Create or ensure the record has item group(s)
3 - Click New->New item
4 - Note the bottom of the page has a form to attach to existing group, or create new
5 - Note when a group is selected the enumchron field is populated
6 - Confirm item is saved to group when saved
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the javascript for the checkouts table to add the
checkbox back in for the case where too_unseen is the error returned by
CanBookBeRenewed, allowing such issues to be renewed.
Signed-off-by: Caroline <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch uses the existing format_price JS include to format prices in
the cashup summary modal
Test plan
1) Create some transactions and a cashup
2) View the cashup summary modal and confirm amounts are not nicely
formatted
3) Apply patch
4) Confirm amounts in cashup summary modals are now nicely formatted
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1. First step is to go to administration > then system preferences
2. Set unseenrenewal to "allow"
3. Go to administatrion > circulation and fines rule
4. Set unseenrenewals count to any number
5. Check out an item to a patron and go to the checkouts tab
6. Renew the item
7. Notice that the renewal messages have no seperation
8. Apply the patch
9. Notice there is now a "&" in the spacing between renewal messages
Sponsored-by: Catalyst IT
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch modifies the subscription entry form so that it will perform
a check on the staffdisplaycount and opacdisplaycount fields before
proceding to the second step. It verifies that the values are numeric.
The changes are made in the style of the existing form validation, which
should be rewritten to either use the validation plugin or to peform
checks in a way that all checks are run before warning the user.
However, this smaller change will work in the meantime.
To test, apply the patch and go to Serials -> New subscription.
- Fill out the form with at least the required fields, but put something
other than a number if the "Number of issues to display to staff" and
"Number of issues to display to the public" with non-numeric characters.
- When you click the "Next" button you should get an error message,
"Number of issues to display to staff must be a number."
- Correct the issues to display to staff field and submit again.
- You should get a different error message, "Number of issues to display
to the public must be a number."
- Correct this field and you should be able to proceed to the next step.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This is another fix for a bug in return claims. We now test for the
initialised datatable and call an ajax reload directly on it if we find
one instead of calling a undefined function (the function is out of
scope here).
NOTE: Taken as a whole commit follow-up on bug 28854 where the issue was
initially identified
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The return claims table was stringifying 'null'. This patch updates the
code to check for definition so we don't stringify incorrectly
Note: This patch was split out from a follow-up on bug 28854 as we felt
it should be treated separately for backportability.
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the field classes introduced in this patchset to
improve class name consistency. We remove the _field apendment and to
repvent a clash we update the existing 'renewals' class elsewhere to
'renewals-info' to more clearly reflect it's content.
Test plan
1) The patchset should continue to function as described in prior patches
2) Build the CSS for the staff client
3) Check the 'Checkouts' table on various screens and confirm the
renewals information still displays as it always has in the table.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To Test:
1. Apply patch, updatedatabase, and restart_all
2. A small change the global scss file means you should regenerate the CSS as well. ( https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_interface )
3. Set DisplayClearScreenButton to "don't show"
4. Go to the patron checkout screen and see that no button should show to clear the screen and print
5. Set DisplayClearScreenButton to 'ISSUESLIP' and make sure the button now appears and the ISSUESLIP prints
6. Set DisplayClearScreenButton to 'ISSUEQSLIP' and make sure the button now appears and the ISSUEQSLIP prints
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When registering a phone number for SMS alerts, the number goes through
a regex filter to make sure the number is valid. One of the formats used
in Europe is 00 AAA XXXXXXXXX (A = country indicator) and it is not
supported.
This patch adjusts the regex to either accept 00 AAA XXXXXXXXX or
+AAAXXXXXXXXX in this case. (Note : +AAA and 00AAA are mutually exclusive).
To test:
1) You need to have installed a SMSAlert plugin. Make sure the
SMSSendDriver syspref is also set up with your SMS plugin of choice.
2) Pick a patron and edit its profile.
3) In the messaging preferences fieldset, under SMS number, enter any
number with the format 00 AAA XXXXXXXXX (ie : 00111123456789).
Try to save the modification : you should have an error message.
4) Try instead a number with the format +AAAXXXXXXXXX (ie :
111123456789), that one should be accepted.
5) Save your modification then check that the number has been changed.
6) Apply patch.
7) Repeat step 3 to 5.
8) Observe the error is gone.
9) Try it once more with the format +00 AAA XXXXXXXXX (+00111123456789),
that format should not be accepted: this is intentional.
10) Sign off.
Thanks-to: Didier Gautheron <didier.gautheron@biblibre.com>
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When creating a patron category or editing an existing one, there is no validation for the "Password expiration" field.
If letters or other characters are entered, there is no error message and if not a number whatever is entered is not saved.
To test:
1. Go to Administration > Patrons and circulation > Patron categories.
2. Add a new patron category (or edit an existing category).
3. For the "Password expiration" field, enter letters or characters such as L$%.
=> Note that you are prompted to "Please enter only digits"
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This is to be consistent with what is done in checkouts.js
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1. Create a biblio without title, then create an item for this biblio.
2. Place a hold on it.
3. Go to the patron detail page and click on the Holds tab
4. Confirm that holds are correctly displayed
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch updates the staff interface's global JavaScript to
accommodate changes in the way focus is being handled after the jQuery
upgrade (see: https://github.com/jquery/jquery/issues/4950).
The "focus" class is removed from search header include files so that
there isn't a contradiction between which form field has the focus class
and which form field is displayed in the active tab.
To test, apply the patch and view various pages in the staff interface.
- On pages where focus is not being directed to a form field within the
main content of the page, the form field in the active search header
tab should have focus on page load:
- Patron details
- System preferences
- Cities and towns
Also test pages where a tab other than the first one is preselected:
- Bibliographic details page
- Patron lists
On these pages, focus should move to the active tab's form field when
you switch tabs.
- On pages where focus is being sent to another form field, it should
work correctly:
- Patrons home page
- Check in
- Acquisitions home page
Signed-off-by: Séverine Queune <severine.queune@bulac.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes a number of changes to the vendor search/view template
in order to make it work better in different contexts:
- Add a vendor-specific toolbar under each vendor search result. This
gives instant access to the options for a new basket, new contract,
vendor edit, or to receive shipments. A delete button will appear if
available.
- Add a summary of the number of baskets and subscriptions. This helps
the user know if there are closed baskets and whether an outstanding
subscription might be blocking the option to delete. Each number is
linked to the view of those entries.
- Indicate whether a vendor is inactive. The vendor name appears in a
different color when it is inactve and is labeled as such.
To test, apply the patch and rebuild the staff interface CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- To test you should have multiple vendors in your system, some active
and some inactive. Add some baskets and subscriptions to one or more
if necessary.
- Go to Acquisitions and submit an empty vendor search to show all
vendors.
- Verify that the page looks correct and that all controls work as
expected.
- Open the basket view for a single vendor and compare the two views.
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
We want to keep the default initComplete call to add/remove the
'disabled' class on the 'Clear filters' link.
Test plan:
Search for patrons, add something to the general DT search and confirm
that the 'Clear filters' link can be clicked (ie. is not disabled) when
the input field is not empty.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Agree that it does not look very elegant.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch corrects the is_valid_date function in the OPAC and staff
interface so that it work correctly with Flatpickr.
To test, apply the patch and clear your browser cache if necessary.
- In the staff client, locate a bibliographic record and edit its items.
- Test that the "Date acquired" date picker works correctly and that
there are no errors in the browser console.
- Test other date input fields to check that they still work, e.g.
specify due date during checkout; Catalog statistics wizard; Patron
entry/modification, etc.
- Perform similar tests in the OPAC: Hold suspension; Update your
personal details.
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch updates letter.js so that it uses .prop("selected") to look
for selected <option>s instead of .attr("selected"). This is necessary
because of the jQuery upgrade.
To test, apply the patch and edit any notice. Test that you can select
one or more database columns and insert them into the body of a notice
by clicking "Insert." Confirm that your selections are inserted where
you left the cursor in the message textarea.
Test with multiple message transports and with multiple languages
installed (with TranslateNotices enabled).
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch updates the notices edit interface in order to replace
jQueryUI accordion and tabs widgets with Bootstrap collapse and tabs.
To test, apply the patch and rebuild the staff interface CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- Set the TranslateNotices system preference to "Don't allow."
- Go to Tools -> Notices and edit any notice.
- On the "Modify notice" page you should see three collapsed sections:
Email, Print, and SMS.
- Clicking the section headings should expand and collapse the panels.
- With one of the panels open, click Save -> Save and continue editing.
- When the page reloads the same panel should be expanded.
- Enable the TranslateNotices system preference.
- Return to the edit interface for one of your notices.
- You should now see at least two tabs: Default and English.
- The sections under each tab should continue to work correctly.
- Test the "Save and continue" functionality again. When redirected you
should return to both the correct tab and the correct panel, e.g. the
"Print" section under the "English (en)" tab.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch updates the MARC and authority subfield edit interface to
replace jQueryUI tabs with Bootstrap. The code for handling
drag-to-reorder tabs is updated to accommodate the new markup.
To test, apply the patch and restart_all.
- Go to Administration -> MARC bibliographic framework -> Default
framework and choose "MARC structure" from the Actions menu.
- In the row for 000 LEADER, click Actions -> View subfields.
- Click "Edit." On the edit page the tabs should look correct and work
correctly.
- Return to the list of tags and click "View subfields" for the 245 tag.
- Click one of the "Edit" buttons for any but the first subfield, e.g.
"a".
- On the "Tag 245 Subfield constraints" page the "a" tab should be
pre-selected.
- Click any of the subfield tabs and drag it to re-order it in the
sequence of tags.
- It should stay in the correct slot when you release it.
- Save and confirm that the new sequence of subfields has been saved.
Perform all the same tests under Administration -> Authority types.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The general search query is not built correctly.
Say you have a table with column filters, like the main patron search:
General filter: henry
Specific filter on the 'Name' column: h
The generated query will be (= are actually LIKE):
{ Column1="henry" AND Column3="henry", ...} AND { Column2="h" }
The first term does not contain the Column2 attribute.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
We could add the configuration to these tables as well, but let go first
but the others (read: feeling lazy right now).
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
No change expected here for ILL
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Here we need to deal with the other DT config (in datatables.js, not
columns_settings.inc).
Test plan:
Same as "normal"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Why don't we have the columns visibility button?
It looks like there is something broken here, why don't we have the
show/hide columns buttons? The code expects it to be displayed.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
For some reason, with the combination of jQuery 3.6.0 and jQueryUI
1.13.1, the way to access the current active tab's link has changed.
Previously the tab activate event would provide information about the
link as "ui.newTab.context." It appears that "context" is no longer
available.
This patch updates the two instances in Koha where this process is
broken.
To test, apply the patch and check out to a patron with holds on their
account.
- When the checkout page loads, confirm that each tab loads its contents
correctly when clicked.
- Check that the correct tab is activated when you append the tab link
to the page url, e.g.
/cgi-bin/koha/circ/circulation.pl?borrowernumber=XXX#reldebarments
...which should select the "Restrictions" tab for you. You may need to
try this in a new tab or shift-reload to get the browser to look for
the hash.
- Perform the same tests on the patron details page.
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
We need to tell DT that we are adding/removing row, not only deal
manually with the DOM.
This patch also fixes the following bug: if you add or remove a row from
the "biblio" tab, then go to another tab and back to "biblio", all
changes were gone (bug existed prior to bug 29893).
Test plan:
Add, edit and remove mappings, switch from tabs and save.
Use the filters, save (29893 regression test)
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch moves most of the JavaScript from upload-images.tt into a
separate file, upload-images.js. Functionality should be unchanged.
To test, apply the patch and go to Tools -> Upload local cover image.
Test all the things:
- Drag-and-drop upload
- Click-to-browse upload;
- Deleting existing images
- Uploading a zip file
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The jQueryUI upgrade broke the Accordion on the notices edit page. I'm
not sure why, but defining a "header" option in the accordion
configuration fixes it.
To test, apply the patch and test the notices edit page both with and
without TranslateNotices and multiple languages installed. In both cases
the different sections (Email, Print, SMS) should open and close
correctly.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The code that adds column filters works only on visible columns, so we
should hide columns after filters are created
Test plan:
1. Apply patch
2. Go to Tables settings. Hide city_state for the cities table.
3. Create some cities and go to the cities page
4. Verify that filtering works as expected.
5. Make the city_state column appear. Verify that filtering on this
column works too
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch modifies the way Koha sets cookies so that the "sameSite"
attribute is explicitly set to "Lax." This option is chosen because it
is the value which is currently assumed by browsers when the sameSite
attribute is not set.
To test, apply the patch and restart services.
- Log in to the staff interface and open your browser's developer tools.
- In Firefox, look for a "Storage" tab.
- In Chrome, look for an "Application" tab.
- Under "Cookies," click the URL of the staff interface.
- You should see all the cookies which are set for that domain.
- The CGISESSID cookie should have sameSite set to "Lax."
- Go to Cataloging -> New record.
- Check the "marcdocs" and "marctags" cookies.
- Switch to the Advanced MARC editor (you may need to enable
theEnableAdvancedCatalogingEditor preference).
- Check the "catalogue_editor" cookie.
- Add a new item to an existing bibliographic record.
- Check the "LastCreatedItem" cookie which is set after you save the
new item.
- Go to Authorities -> Authority search.
- In authority search results, click "Merge" from the "Actions" menu
next to one of the results..
- Check the "auth_to_merge" cookie.
- Go to Administration -> MARC bibliographic framework
- Choose "MARC structure" from the menu corresponding to one of the
frameworks.
- Check the "Display only used tags/subfields" checkbox.
- Check the "marctagstructure_selectdisplay" cookie.
- Go to Circulation -> Check out to a patron with checkouts.
- Check the "Always show checkouts immediately" checkbox.
- Check the "issues-table-load-immediately-circulation" cookie.
- Go to Tools -> Patron clubs. You will need at least one active club
with one or more patrons enrolled.
- From the list of clubs, click Actions -> Search to hold.
- Check the "holdforclub" cookie.
- Go to Tools -> Batch item modification and submit a batch of items.
- Uncheck one or more checkboxes in the "Show/hide columns" area.
- Check the "showColumns" cookie.
- View a patron -> Search to hold.
- Check the 'holdfor' cookie.
- With WebBasedSelfCheck enabled, log in to the self-checkout page.
- Check the "JWT" cookie.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch removes the definition of translatable strings out of
templates and into the corresponding JavaScript file, using the new JS
i81n function.
Note: I was unable to trigger the confirmation message in the
check_form_borrowers function. I think the form is now structured in a
way that it is never triggered, thus a candidate for removal.
To test:
- Apply the patch and go to Patrons.
- Add or edit a patron.
- Select a date of birth at least one month in the past and confirm that
the patron's age is displayed in the hint below.
- Test multiple variations to confirm that the singular and plural of
'year' and 'month' display correctly. (e.g. 1 year 9 months, 2 years,
etc).
- Set some patron messaging preferences for the patron.
- Change the patron category.
- You should get a confirmation: "Change messaging preferences to
default for this category?"
TESTING TRANSLATABILITY
- Update a translation, e.g. fr-FR:
> cd misc/translator
> perl translate update fr-FR
- Open the corresponding .po file for JavaScript strings, e.g.
misc/translator/po/fr-FR-messages-js.po
- Locate strings pulled from
koha-tmpl/intranet-tmpl/prog/js/members.js for translation, e.g.:
msgid "%s years"
msgstr ""
- Edit the "msgstr" string however you want (it's just for testing).
- Install the updated translation:
> perl translate install fr-FR
- Switch to your newly translated language in the staff client
and repeat the test plan above. The translated strings should
appear.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
We are using json files to retrieve the list of the DB columns. We can
reuse what we have done in the previous patch and display translated
strings.
Test plan:
Search for "unwanted" in the sysprefs
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
C4::Templates::GetColumnDefs can easily be replaced using the new
Koha::Database::Columns module.
Test plan:
Go to the import patron tool and confirm that you see the same list of
patron's attribute on the import patron form.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds a new page providing an interface for generating
barcodes using svc/barcode. A form allows the user to choose various
parameters and see the resulting barcode image.
To test, apply the patch and rebuild the staff interface SCSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- Go to the "Tools" home page. Follow the link to "Barcode image
generator."
- On the barcode image generator page, confirm that there is a "Barcode
image generator" link in the sidebar and that it is displayed with
bold text.
- Test the features of the form:
- Enter a numeric value in the "Barcode" field and tab out of the
field or click "Show barcode" button. A barcode of type "Code39"
should be shown with the text of the barcode included in the
image below the barcode.
- A text area below the barcode image should show the HTML used to
generate the preview image.
- Clicking in this textarea should automatically add the contents to
the clipboard. You should be shown a message, "HTML copied to the
clipboard."
- Check the "hide text" checkbox. The barcode should be redisplayed
without the text.
- Check that changing the "barcode height" value is reflected
correctly in the barcode image.
- Try adding non-numeric data in the "Barcode" field. You should be
shown an error message, "Barcodes of type [type] must be numeric."
- Test these other numeric barcode types: Code39, COOP2of5, EAN13,
EAN8, IATA2of5, Industrial2of5, ITF, Matrix2of5, NW7, UPCA, and
UPCE.
Note that EAN13, EAN8, UPCA, and UPCE expect specific patterns. Test
values (found here: https://barcode.tec-it.com/en/UPCE):
EAN13: 978020137962
EAN8: 9031101
UPCA: 72527273070
UPCE: 0123456
- Change the barcode type to "QRcode."
- The form should change, hiding the "Hide text" checkbox and
showing a new ranger slider for "QR Code module size."
- The barcode field should now be labeled "Text, URL, or barcode,
etc"
- The barcode field hint should change to a hint about QRcode
dimensions.
- Changing the "module size" slider should change the size of the
generated QR code. As you change the slider the selected value
should be reflected in the box.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
There is a possibility on OPAC but not yet on the staff interface, so I added this syspref which has the same behaviour as the OPAC highlighting syspref.
When you choose to disable highlighting on the syspref, the toggle anchor in the result page does not appear at all.
But if you keep the default state (highlighting on), you still have the option to switch between "Unhighlight" and "Highlight" modes.
Test plan :
1. Go to the syspref named "StaffHighlightedWords" and see that the default state is "Highlight".
2. Look for something in the catalogue for example and see that the words are highlighted and that it is also possible to change between "Unhighlight" and "Highlight".
3. Go back to syspref and choose to disable highlighting by choosing "Don't Highlight".
4. Refresh your results page if you have not closed it or reload a new search.
5. There is no highlighting at all and anchors do not exist (same behaviour as the OPAC interface).
Signed-off-by: ManuB <e.betemps@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
A new agefield has been added to the 'Automatic item modifications by
age' tool. The options for the agefield are: replacementpricedate, datelastborrowed,
datelastseen, damaged_on, itemlost_on, withdrawn_on
If no option is selected then Koha will default to saving 'agefield' =
items.dateaccessioned
Similarly, if a Koha instance has an old item rule without 'agefield'
defined then Koha will default to using 'items.dateaccessioned'.
This is confirmed by the AutomaticItemModificationByAge.t unit test.
Test plan:
1. Go to: Tools > Catalog > Automatic item modifications by age
2. Observe there is a new 'Age field' dropdown in the rule form.
3. Create a rule, set the values:
- 'Age in days' = 20
- Leave 'Age field' = 'Choose an age field'
- 'Substitutions': 'items.barcode' = 'test'
- Save the rule
4. Confirm the 'List of rules' page displays 'items.dateaccessioned in the 'Age field' column
5. Add another rule:
- 'Age in days' = 2
- 'Age field' = 'items.datelastseen'
- 'Substitutions': 'items.barcode' = 'test2'
- Save the rule
6. Confirm the 'List of rules' page displays 'items.datelastseen' in
the 'Age field' column for that second rule
7. Add some more rules and confirm you can delete them
8. Edit a record:
- Make the items.dateaccessioned = 3 day ago (so rule 1 is false)
- Make the items.datelastseen = 3 days ago (so rule 2 is true)
9. Run the automatic_items_modification_by_age.pl:
- sudo koha-shell <instance>
- cd misc/cronjobs
- ./automatic_item_modification_by_age.pl -v -c
10. Confirm the item has it's barcode set to 'test2'
11. Run unit tests:
- sudo koha-shell <instance>
- prove t/db_dependent/Items/AutomaticItemModificationByAge.t -v
Sponsored-By: Catalyst IT
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch updates templates to include the new version of jQueryUI. It
removes some references to the now unused datepicker widget as well as
the jQuery timepicker addon.
Some minor JavaScript and style updates to fix issues resulting from the
upgrade.
To test, apply the patch and update the CSS in the staff interface AND
in the OPAC
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
IN THE OPAC:
- The OPAC only uses the tabs jQueryUI widget.
- View pages where tabs are used: Bibliographic details, user summary,
advanced search.
IN THE STAFF INTERFACE:
- The staff interface uses four jQueryUI widgets: accordion,
autocomplete, sortable, and tabs
- Test the accordion widget on two pages: Administration -> Table
settings and Patrons -> Patrons requesting modifications.
- Test autocomplete (requires PatronAutoComplete to be enabled) on
various pages. For example:
- From the "Check out" tab in the header search box.
- From the "Search patrons" tab in the header search box, e.g. from
the main Patrons page.
- Place hold -> Search patrons.
- Tools -> Patron lists -> Add patrons to list -> Patron search.
- Test sortable:
- Administration -> System preferences -> Language.
- With more than one language installed you should be able to
drag to re-order the enabled languages. Confirm that your change
is saved successfully.
- Administration -> MARC bibliographic framework -> MARC structure ->
Edit subfields on a tag with multiple subfields. You should be able
to drag to re-order the tabs at the top of the subfield constraints
edit page. Confirm that your changes are saved successfully.
- Cataloging -> New record. Test that you can re-order subfields
under a tag with multiple subfields and that your changes are
saved.
- Tabs: View various pages with tabs: Check out, bibliographic details,
basic MARC editor. They're everywhere.
Also confirm that the removal of the leftover datepicker doesn't affect
pages which use the calendar include: Test various pages which use
Flatpickr, e.g. check out, renew, reports, etc.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes the wrapper handle the data.draw parameter (from
DataTables) translating it into the x-koha-request-id header for making
the Koha request, and then translates the received header into data.draw
for proper use in DataTables.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Also addresses QA test tools, perldoc in ImportExportFramework.pm
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds filters to the template file and moves the JS into a
separate file.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Mazen Khallaf <mazen.i.khallaf@gamil.com>
Signed-off-by: Michal Denar <black23@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
On later follow-ups (ERM) we need to filter columns that contain AVs,
and so be more flexible. Here we are expecting a _id and _str keys we
are gonna use to build the select's options
Signed-off-by: Séverine Queune <severine.queune@bulac.fr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
ie. search for "", not "^$"
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Séverine Queune <severine.queune@bulac.fr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
For libraries and categories we need to use an exact match.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Séverine Queune <severine.queune@bulac.fr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
With the required addition of fields to the displayed result table, we
need to increase the size of the popover window to prevent horizontal
scrolling.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Séverine Queune <severine.queune@bulac.fr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
We lost the DefaultPatronSearchFields behaviour, we don't want to search
on all data but only DefaultPatronSearchFields
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Séverine Queune <severine.queune@bulac.fr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Last patches remove the ability to search on extended attributes.
C4::Utils::DataTables::Members::search is searching on all the
attributes that are flagged as "searchable", we want to keep this
behaviour.
I have tried several things and this is the simplest I have found.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Séverine Queune <severine.queune@bulac.fr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch will rewrite some of our patron searches to make them use the
REST API routes (and so the powerful the DataTables wrapper which will
bring all the nice DT feature to filter, sort, etc.)
The patron searches we will take into account here are those that we use
to select a patron in a pop-up:
* Guarantor
* Suggestion's manager
* Patron's card
* Serial routing list
* Users to notify when order is received
* Manager of an acquisition basket
* Owner and users of a fund
Regarding permissions there are two main problematics:
* Filter a patron set by patrons having a
specific subpermissions (in case of adding a manager to a suggestion or
when we deal with acquisition and funds). We added a new
Koha::Patrons->filter_by_have_subpermission method that will take in
parameter a subpermission. To make thing transparent for the callers we
are adding new routes, like /suggestions/managers to list the possible
managers of suggestions.
* Restrict/allow access to the default patron searches /patrons
We need to access it when a logged in patron does not have borrowers
permission.
Ideally we need a separate "search_borrowers" subpermissions but it's
considered outside the scope of this change.
For each patch you will take care of testing the different permissions
that are into effect (either for the logged in patron or the patrons
returned by the search).
The tables should contain the same columns as prior to this patch,
except for "categories" and "library". We have the filter on top of the
page and so we need to add them to the table as new columns if they
weren't there before.
Test plan (for this patch):
Search for guarantor and select
Test plan (for all patches):
Add/Select patrons from the correct place where you can search for
patrons, play extensively with the filters/pagination/etc
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Séverine Queune <severine.queune@bulac.fr>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes searching for '%','_' and '\' work by escaping those
symbols in the query before sending them to the API.
To test:
1. Go to the cities page
2. Add two cities:
- 'Cordoba %'
- 'Buenos Aires _'
- 'London \'
3. Use the column search on the name, alternating _, \ and % as the query
=> FAIL: Weird behavior
4. Apply this patch and reload
5. Repeat 3
=> SUCCESS: Filtering works correctly!
6. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Séverine Queune <severine.queune@bulac.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test:
1 - Define default messaging preferences for a patron category, checking a transport and the digest only boxes
2 - Create a new patron of a different category
3 - Change the category to the one set above
4 - Note that checkboxes are checked, but digest boxes are disabled
5 - Save patron - the digest boxes are not saved
6 - Apply patch
7 - Repeat 2&3
8 - Note checkboxes for digest are checked and enabled
9 - Save patron and confirm options are saved
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
We should not need this function any longer
I left the else conditional just in case
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch removes the alert, but adds a stopPropagation call
in order to not close the menu when the disabled buttons are clicked
To test:
1 - Find a record with items in the staff interface
2 - Click edit
3 - Note 'Edit items in a batch, 'Delete items in a batch', and 'Delete
all items' are grayed out
4 - Note hovering displays a note that there are no items
5 - Click on each anyway, an alert is generated, menu is closed
6 - Apply patch
7 - Reload page
8 - Click on each disabled option and confirm
- there is no more alert
- the menu does not close
9 - Confirm tooltip is displayed
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
moremember-patronimage.pl|tt were not needed.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch builds on a patch by Mark Tompsett, adding the option to take
a patron's picture using the computer's webcam. The photo can then be
saved to the patron's account.
To test, apply the patch and rebuild the staff interface CSS
(https://wiki.koha-community.org/wiki/Working_with_SCSS_in_the_OPAC_and_staff_client).
- Go to Administration -> System preferences and enable the
'patronimages' preference.
- View a patron record. In the sidebar, hover your mouse over the blank
patron image. Click the "Edit" button which appears.
- A modal window should appear with two sections, "Upload patron photo"
and "Take patron photo."
- If your computer has a webcam, your browser should ask permission to
access it. Grant access.
- You should see the view of your webcam shown under the "Take photo"
button.
- Click the "Take photo" button. The captured photo should be shown in
place of the live video from the webcam.
- You should now see three buttons: "Retake photo," "Download photo,"
and "Upload photo."
- Clicking "Retake photo" should hide those buttons and return you
to a live video view.
- Clicking "Download" should make your browser download the image.
- Clicking "Upload" should cause the page to redirect back to the
patron detail page where you should see the new patron image
displayed in the sidebar.
- Trigger the modal again and click the "cancel" button. The
modal should disappear and camera access should stop.
- If your computer has no webcam the modal should appear correctly but
there should be a banner at the bottom indicating that a camera is not
available.
- Try the test again but this time deny your browser access to the
webcam. You may need to reset the camera permissions in your browser's
settings. When the modal appears you should see a message saying
access to the camera is denied.
- The patron image edit modal should be available on all pages which
show the patron image in the sidebar: Check out, Batch check out,
Details, Accounting, Routing lists, Circulation history, Holds
history, Modification log, Notices, Statistics, Files, Purchase
suggestions, Discharges, Housebound, and ILL requests history.
- Test adding an image to a patron record using the "Upload photo"
option. It should still work correctly.
- If the patron has an image attached, the "Upload photo" section should
have a "Delete" button. Test that it works correctly.
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch replaces jQueryUI tabs on the search engine configuration
page, replacing them with Bootstrap tabs.
To test, apply the patch and go to Administration -> Search engine
configuration.
- The "Search fields" tab should be selected by default, and the table
should be initialized as a DataTable with sorting and filtering.
- When you switch to the "Bibliographic records" and "Authorities" tabs
the tables on those tabs should also be initialized, each with
filtering and drag-and-drop row re-ordering.
- All tables should continue to work correctly after switching back and
forth between tabs.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
If you are editing ES mappings and you use the DataTable filtering option,
the table won't contain all the mappings you have in the DB.
If the form is submitted they will be removed and data will be lost!
Test plan:
Edit ES mappings, filter and submit the form.
Confirm that the table are redrawn before the form submission which
prevent data loss
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch updates teh search customisations in ill-list-table to
properly fetch the existing flatpickr instances for date searches.
To test:
1. Have at least one ILL request on the ILL requests page
2. Open the broser inspector
3. Choose a date on the left hand form
=> FAIL: Errors in the console, search doesn't work
4. Apply this patch
5. Reload
6. Repeat 2-3
=> SUCCESS: No more errors, filtering works!
7. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
1 - Define default messaging preferences for a patron category
2 - Go into an existing account and change the patron category to the
one set in step 1.
3 - Confirm that the messaging prefs have been reset to that of the
default patron category
4 - Apply patch
5 - Repeat Step 2, this time you should see a warning asking if you want
to set messaging prefs to the category default
6 - Press OK and save. Confirm that the messaging prefs are now set to
the default for that category
7 - Try it again with an existing account and press Cancel this time.
Notice that there should be no change to the patron messaging prefs.
8 - Try making a new patron and switching the category, you should see
no warning and the message prefs should be proberly set to the
defaults of any category you choose.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
And making reverted ajax message clearer
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
- fixes the displays of opac-recalls.pl and opac-recall.pl
- fix the error on Recalls to pull page
- fix JS error preventing Recalled link from showing in checkouts table
- fix cancelling of recall when checking out item
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
See recalls on Intranet
- old recalls (all inactive recalls)
- recalls queue (all active recalls) - cancel, expire, revert waiting status, multiple cancel, mark overdue
- recalls to pull (available but not yet waiting) - cancel
- recalls awaiting pickup (awaiting pickup, awaiting pickup more than RecallMaxPickUpDelay days) - expire, revert waiting status
- overdue recalls (overdue to be returned) - cancel, multiple cancel
- biblio recalls tab (all active recalls relevant to this bib) - cancel, expire, revert waiting status, mark overdue
- patron recalls tab (all active recalls relevant to this patron) - cancel, expire, revert waiting status, mark overdue
- patron recalls history tab (all recalls relevant to this patron) - cancel, expire, revert waiting status, mark overdue
- log viewer
and the general circulation of recalls
== TEST PLAN FOR RECALLS ==
ADMINISTRATION
1. Apply all patches
2. Run database updates, update schema files and confirm everything applies cleanly
3. Run tests and confirm everything passes:
t/db_dependent/Koha/Recall.t
t/db_dependent/Koha/Recalls.t
t/db_dependent/Stats.t
t/db_dependent/Circulation/CalcFine.t
t/db_dependent/Koha/Item.t
t/db_dependent/Koha/Biblio.t
t/db_dependent/Koha/Patron.t
t/db_dependent/XSLT.t
t/db_dependent/Search.t
t/db_dependent/Holds.t
t/db_dependent/Circulation/transferbook.t
t/db_dependent/Circulation.t
4. Go to Administration -> system preferences. Find the UseRecalls system preference. It should be DISABLED. Confirm RecallsMaxPickUpDelay is set to 7 by default.
5. Go to Administration -> circulation rules. Confirm there are no recalls circulation rules showing.
6. Test a few circulation flows: checking out, placing a reserve, checking in, fulfilling a reserve, etc. Confirm everything works as normal.
7. Go to Administration -> system preferences. Enable the UseRecalls system preference.
8. Go to Administration -> circulation rules. Set the following rules:
Recalls allowed (count) = 0
Recalls per record (count) = 0
On shelf recalls allowed ( If any unavailable / If all unavailable ) = If any unavailable
Recall due date interval (days) = 3
Recall overdue fine amount = (something different to your normal fine amount)
Recall pickup period (days) = 1
Throughout your testing, try with different combinations of these rules and itemtype / branchcode / categorycode. Also try with null values. Keep the circulation rules open in another tab so you can refer to and update these easily. You should also have at least one other tab open for the staff client, and a third tab open for the OPAC, for ease of testing.
9. Go to your account -> More -> Set permissions. Confirm the recalls permission is checked.
10. Set up a test user with OPAC login details (Borrower A). This could also be your own user, as long as you have OPAC login access.
11. Set up a test record (Biblio A) with at least two items (Item A and Item B) of the same item type (or an item type with the same recall circ rules).
PLACING A RECALL
12. Log in to the OPAC as Borrower A. Do a catalogue search with a term that will return multiple results, including Biblio A.
13. Click on Biblio A.
14. Notice there is a 'Place recall' button on the sidebar menu. Click this button. There will be a message saying that there are no items to recall - this is because all items are available.
15. Check out Item A to another borrower (Borrower B).
16. Refresh the 'Place recall' page. You will still NOT be able to place a recall - this is because Recalls allowed = 0 and Recalls per record = 0.
17. Edit the circulation rules to have the following values:
Recalls allowed (count) = 1
Recalls per record (count) = 1
18. Refresh the 'Place recall' page. You will now see the form to place a recall.
BIBLIO-LEVEL RECALL, NO TRANSFER
19. Place a biblio-level recall.
Pickup location: Branch A, the set branch when you are logged into the staff client
Recall not needed after (expiration date): whatever you want
Select 'recall next available item'
Click confirm
20. Confirm the recall is placed successfully. Confirm that the new due date displayed is correctly calculated to be today's date, plus 3 days (taken from the 'recall due date interval' circ rule)
21. In the staff client, look at Borrower B's account, and go to their Notices tab. Confirm they have received a 'Notification to return recalled item' notice.
22. Look at Borrower B's checkouts table. Notice the due date for their checkout has been adjusted, and there is now a note to say that the item was recalled and the due date adjusted.
23. Log in to the OPAC as Borrower B and go to your summary tab. Notice there is a note under their checkout to say the item had been recalled.
24. Log out of the OPAC and log back in as Borrower A.
25. Go to your summary tab. Confirm there is a Recalls tab with a count of 1.
26. Cancel the recall using the button. Confirm it cancels and the Recalls tab disappears.
27. Do a catalogue search with a term that will return multiple results, including Biblio A.
28. When the results load, notice there is a 'Place recall' button next to the 'Place hold' button. Click this 'Place recall' button.
29. Notice you are redirected straight to the form to place a recall.
30. Place a biblio-level recall again, following the steps in Step 19.
31. Go to your recalls history tab. Notice your first cancelled recall shows here.
32. Cancel the recall you just created, using the button. Confirm it cancels and you are redirected to your summary tab.
33. In the staff client, enable the UseCourseReserves system preference.
34. Go to the main menu, click Course Reserves.
35. Add a new course. (You may also have to define an authorised value for DEPARTMENT.)
36. Add Item A as a reserve to this course.
37. View Course Reserves in the OPAC. Click the course you just created.
38. Notice the reserve has a Recall button underneath it's 'Checked out' status. Click this button.
39. Place a biblio-level recall again, following the steps in Step 19.
40. Click the 'Place recall' link in the breadcrumbs.
41. Notice there is a message saying that you have reached the max number of recalls on this record. This is because Recalls allowed = 1 and Recalls per record = 1.
42. Edit the circulation rules to have the following values:
Recalls allowed (count) = 10
Recalls per record (count) = 5
43. Refresh the 'Place recall' page. You will now see the form to place a recall.
44. Create another test record (Biblio B) with at least one item (Item C).
45. Find this record on the OPAC and place a biblio-level recall again, following the steps in Step 19.
46. In the staff client, go to Circulation -> Old recalls. You should be able to see your two cancelled recalls.
47. Go to Circulation -> Recalls queue. Your current recalls should show here.
48. Use the 'Select all' checkbox to select all recalls.
49. Cancel the recalls using the 'Cancel selected recalls' button.
50. Go to the OPAC and place a biblio-level recall on Biblio A again, following the steps in Step 19.
51. In the staff client, check in Item A, which should still be checked out to Borrower B.
52. A box should pop-up asking you to confirm Borrower A's recall. Click ignore.
53. Click the link to go view Biblio A's details in the catalogue.
54. Click the recalls tab. Notice Borrower A's recall is displayed, and shows it is still Requested (has not been confirmed waiting).
55. Check in Item A again. This time, confirm the recall as waiting using the "Confirm recall" button.
56. Go to Borrower A's Notices tab. Confirm there is a notice "Recalled item awaiting pickup".
57. Go to Borrower A's checkouts. Notice there is a recalls tab. Confirm the recall is showing as "Ready for pickup".
58. Click the 'Actions' dropdown. Click the "Revert waiting" button. The page should show a message that the waiting status has been reverted, without reloading.
59. This time, check in Item B. The recall confirmation box should show again, because this a biblio-level recall that any recallable item under Biblio A can fill. Click the "Print slip and confirm" button.
60. Check the slip that is generated. Confirm it contains Borrower A's correct details, and the details of the recall are correct.
61. Go to Circulation -> Recalls awaiting pickup. Confirm the recall is now waiting and shows in this list.
(You could also try this with Item B having a different item type to Item A, and circ rules not allowing Item B's item type to have recalls. When checking in Item A, it should not trigger the recall box).
62. Go to Borrower A's checkouts. Check out Item B.
63. Confirm the checkout is successful and the recall is removed from the Recalls tab.
64. Go to Circulation -> Old recalls. The fulfilled recall should show.
65. Check in Item B.
BIBLIO-LEVEL RECALL, TRANSFER REQUIRED
66. Check out Item A to Borrower B.
67. Log in to the OPAC as Borrower A.
68. Find Biblio A and place a biblio-level recall.
Pickup location: Branch B, a different branch from your logged in branch. This recall will require a transfer.
Recall not needed after (expiration date): whatever you want
Select 'recall next available item'
Click confirm
69. In the staff client, check in Item A at Branch A. Notice the box that pops up shows that a transfer is required.
70. Click "confirm recall and transfer" and confirm the transfer.
71. Go to your account and click the Recalls tab.
72. Confirm the recall status now shows the item is in transit to Branch B.
73. In the drop-down top-right of your window, select 'Set library'.
74. Set your library to Branch B.
75. Go to Circulation -> Transfers to receive. Notice that the recall is showing here.
76. Click 'Cancel transfer'.
77. Go to Circulation -> Recalls queue
78. Confirm the recall status has been reverted to Requested.
79. Set your library back to Branch A.
80. Check in Item A and trigger the transfer.
81. Set your library back to Branch B.
82. Check in Item A at Branch B.
83. When the 'Recall found' box pops up, click Ignore.
84. Go to Circulation -> Recalls to pull. The recall should show here, with a button to "Cancel recall and return to: Branch A"
85. Click the button to cancel the recall.
86. Repeat Steps 66-70.
87. Check in Item A at Branch B. Confirm the recall as waiting.
88. Check out Item A to Borrower A to fulfill the recall.
89. Set your library back to Branch A and check in Item A.
ITEM-LEVEL RECALL, NO TRANSFER
90. Go to Administration -> circulation rules. Set the following rules:
On shelf recalls allowed ( If any unavailable / If all unavailable ) = If all unavailable
91. Check out Item A to Borrower B.
92. Log in to the OPAC as Borrower A and go to Biblio A.
93. Click the 'Place recall' button. Confirm there is a message that there are no items to recall. This is because On shelf recalls allowed = If all unavailable, and there is still one item (Item B) available.
94. In the staff client, edit Item B to have a withdrawn, item lost or not for loan status.
95. Refresh the 'Place recall' page. Confirm you can now see the form to place a recall.
96. Place an item-level recall.
Pickup location: Branch A.
Recall not needed after (expiration date): whatever you want
Select 'recall a specific item'
Item B will not be selectable, and Item A should be selected by default.
Click confirm
97. In the staff client, edit Item B and remove the lost or missing status.
98. Check in Item B. Confirm the recall box does not pop up, because it cannot fill the item-level recall.
99. Check in Item A. Confirm the recall as waiting.
100. Go to Circulation -> Recalls awaiting pickup
101. Expire the recall. Confirm it expires as expected.
ITEM-LEVEL RECALL, TRANSFER REQUIRED
102. Repeat steps 91 to 95.
103. Place an item-level recall.
Pickup location: Branch B, we will require a transfer.
Recall not needed after (expiration date): whatever you want
Select 'recall a specific item'
Item B will not be selectable, and Item A should be selected by default.
Click confirm
104. In the staff client, check in Item A. Confirm the recall and trigger the transfer.
105. Set your library to Branch B and check in Item A.
106. Confirm the recall as waiting.
107. Check out Item A to Borrower A and fulfill the recall.
108. Set your library back to Branch A and check in Item A.
CRONJOBS: EXPIRING RECALL
109. Check out Item A to Borrower B.
110. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
111. In your terminal, enter mysql and edit the expiration date of your recall to be before today
UPDATE recalls SET expirationdate = NOW()-2 WHERE recall_id = X;
112. Run the expiry cronjob from within your shell
perl misc/cronjobs/recalls/expire_recalls.pl
113. Go to Borrower A's account and go to the Recalls history tab
114. Confirm the recall has been expired because the current date surpassed the specified expiration date
115. Check out Item A to Borrower B.
116. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
117. In the staff client, check in Item A and confirm the recall as waiting.
118. In your terminal, enter mysql and edit the waiting date of your recall to be before today
UPDATE recalls SET waitingdate = NOW() - interval 5 day WHERE recall_id = X;
119. Run the expiry cronjob from within your shell
perl misc/cronjobs/recalls/expire_recalls.pl
120. Go to Borrower A's account and go to the Recalls history tab
121. Confirm the recall has been expired because the recall had been waiting for more days than the Recall pickup period
122. Go to Administration -> circulation rules. Set the following rules:
Recall pickup period (days) = 0
123. Set the RecallsMaxPickUpDelay system preference = 1.
124. Check out Item A to Borrower B.
125. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
126. In the staff client, check in Item A and confirm the recall as waiting.
127. In your terminal, enter mysql and edit the waiting date of your recall to be before today
UPDATE recalls SET waitingdate = NOW()-2 WHERE recall_id = X;
128. Run the expiry cronjob from within your shell
perl misc/cronjobs/recalls/expire_recalls.pl
129. Go to Borrower A's account and go to the Recalls history tab
130. Confirm the recall has been expired because the recall had been waiting for more days than the RecallsMaxPickUpDelay syspref
CRONJOBS: OVERDUE RECALL
131. Check out Item A to Borrower B
132. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
133. In your terminal, enter mysql and edit the due date of the checkout to Borrower B to be before today
UPDATE issues SET date_due = NOW()-2 WHERE issue_id = X;
134. Run the overdue cronjob from within your shell
perl misc/cronjobs/recall/overdue_recalls.pl
135. Go to Circulation -> Overdue recalls
136. Confirm your recall is showing here now as the recall has been marked Overdue
CIRCULATION
137. Check in Item A.
138. When the recall box pops up, click Ignore.
139. Check out Item A to Borrower B. You should see a yellow confirmation box, saying that another borrower has recalled the item you are trying to check out.
140. Click "No don't check out" and confirm the item isn't checked out and the recall remains.
141. Repeat Step 139.
142. Click "Yes check out" and confirm the item is checked out and the recall remains.
143. When Borrower B's checkout table loads, confirm that you cannot renew or check in the item from the Checkouts table because there is a 'Recalled' link which takes you to the recalls tab for that biblio.
144. Repeat Steps 137-139.
145. Select "Cancel recall" and click "Yes check out" and confirm the item is checked out and the recall has been cancelled.
146. Log in to the OPAC as Borrower A. Place a recall (any level) on Biblio A.
147. Check in Item A. Confirm the recall as waiting.
148. Check out Item A to Borrower B. You should see a yellow confirmation box, saying that that another borrower has recalled the item that you are trying to check out.
149. Select "Revert waiting status" and click "Yes check out" and confirm the item is checked out and the recall status has reverted to requested.
OTHER
150. In your terminal, enter mysql and edit the due date of the checkout to Borrower B to be before today
UPDATE issues SET date_due = NOW()-2 WHERE issue_id = X;
151. Go to Borrower A's recalls and click the Actions dropdown.
152. Click "Mark as overdue" and confirm the recall is marked as overdue manually.
153. Go to Tools -> Log Viewer. Check only the Recalls module, and leave all other parameters, and click Submit.
154. Confirm all of the recalls actions that have been made are correctly logged.
Note: recalls messaging preferences are introduced in Bug 23781.
The recall feature is fully documented at: https://wiki.koha-community.org/wiki/Catalyst_IT_Recalls
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This removes the need to handle single and multiple cases separately,
thus removing bunch if-else cases and simplifying our code. This
coding style is also in line with our other .pl scripts.
To test:
1) Make sure placing a hold still works from the following pages:
/cgi-bin/koha/catalogue/detail.pl?biblionumber=XXX
/cgi-bin/koha/catalogue/search.pl?q=a
/cgi-bin/koha/virtualshelves/shelves.pl?op=view&shelfnumber=XXXX
/cgi-bin/koha/clubs/clubs.pl (create a new club and add a patron
there and through the clubs.pl create a hold to a bib)
Signed-off-by: Hayley Pelham <hayleypelham@catalyst.net.nz>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This problem appears (at least) on the cities list view:
If you pass a filter in the "Search cities" filter in the header, it
won't be taken into account and all the cities will be displayed.
There are two problems. First we are passing an "empty" q=[] in the
body, the filter from the header is passed as URL parameters. We should
not need to pass the q if it's empty.
Then the main problem is coming from a bug in
Koha::REST::Plugin::Query but I didn't manage to track it down. If we
have two 2 passed, only the second one will be used. We are certainly
using a hash somewhere we should not.
This patch is fixing the bug but not on the correct side. A follow-up
bug should take care of the main problem at lower level.
Test plan:
Hit /admin/cities.pl
Create some cities
Use the filter in the header of the page and submit
=> Without this patch all cities are retrieved
=> With this patch applied only the relevant cities are displayed.
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds some custom validation to the MARC tag and subfield
fields so that they are limited to alphanumeric characters.
Both templates (the main view and the edit view) have been modified so
that item_search_fields.js can be included in both.
To test, apply the patch and test the form by entering a variety of
different character combinations. The "MARC field" and "MARC subfield"
inputs should only accept alphanumeric entries.
Test both "new" and "edit" operations.
Test other operations like delete and cancel.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jose-Mario <jose-mario.monteiro-santos@inLibro.com>
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
With previous patches everythign worked, however, clicking the heading in
authority search results now launched the preview instead of taking you to the
authority details
This patch uses a new class to launch the modal and conditionally applies it to
authority results as we expect different behaviours when searching from the popup
vs authority module
To test:
1 - Repeate previous tests, confirm they pass
2 - Search for authorities in the authority module
3 - COnfirm clicking on heading takes you to detail page for authority
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
To test:
1. Use same plan as previous patch, but observe full item type description
instead of item type code
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Add new column item type to holds table in patron's details and check
out views. Some libraries will find this information useful for
distinguishing inter library holds from normal holds.
To test:
1. Apply patch
2. Place a hold and confirm it
3. Go to cgi-bin/koha/circ/circulation.pl?borrowernumber=1 with
borrowernumber being the id of your patron
4. Click "1 Hold(s)" tab
5. Observe new column "Item type"
6. Confirm the item type is correct
7. Go to moremember.pl?borrowernumber=1 with
borrowernumber being the id of your patron
8. Repeat steps 4-6
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Add a 'Resolve' button in the alert dialogue that is displayed when a
lost item with a return claim is checked in. The button will trigger the
usual resolution modal allowing the user to pick their resolution.
This patch splits the resolution modal out of checkouts.js and
checkouts-table.inc so it can be used outside of the checkouts table.
We then reload it, optionally based upon the presence of the claims
preference, where needed. This has the added benefit that it saves a
little bit of page load data in cases where the feature is not enabled.
Test plan
1. As we alter the file locations of the resolution handling code we
need to test that normal claims functionality continue to work as
expected.
2. Test the new functoinality by checking in an item that has been
claimed as returned (but not yet resolved). The dialogue box should
now contain a 'resolve' button next to each claimant and clicking
upon it should trigger the resolution modal where the librarian can
subsequently pick the resolution and submit it.
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch removes the definition of translatable strings out of
templates and into the corresponding JavaScript file, using the new JS
i81n function.
To test:
- Apply the patch and go to Serials -> New subscription
- Click "Next" without filling out any fields. You should get two
confirmations, "If you wish to claim late or missing issues you must
link this subscription to a vendor. Click OK to ignore or Cancel to
return and enter a vendor" and "You must choose or create a
bibliographic record."
- Manually enter a vendor number which doesn't exist and click "Next."
Error: "The vendor does not exist."
- Manually enter a record number which doesn't exist and click "Next."
Error: "Bibliographic record does not exist!"
- Select a valid vendor and bibliographic record and proceed to the next
page.
- Click "Test prediction pattern" without filling in any fields. Error:
"Cannot test prediction pattern for the following reason(s): Frequency
is not defined. - First publication date is not defined"
- Click "Save subscription" without filling in any information. Error:
"You must choose a first publication date."
- Fill in a date and click "Save subscription." Error: "You must choose
a subscription length or an end date."
- Enter a frequency and subscription start date and click "Save
subscription." Error: "Please click on 'Test prediction pattern'
before saving subscription."
- Click "Show advanced pattern" and then "Save subscription." Error:
"You have modified the advanced prediction pattern. Please save your
work or cancel modifications."
Testing numbering patterns:
- There are several strings related to setting and editing numbering
patterns but I don't think they can be tested live while Bug 28012 is
unfixed.
Testing Mana integration:
- To test Mana integration you must have Mana enabled, and a
bibliographic record in your catalog which has an ISSN
matching a record in Mana. You can go to "Search on Mana"
from the Serials sidebar menu to locate a working record.
- Add a subscription using the bibliographic record which will match a
record in Mana. When you click "Next" you should see a message at the
top of the page saying, "Searching for subscription in Mana Knowledge
Base"
- After a moment this message should be replaced with "Subscription
found on Mana Knowledge Base: Show Mana results"
- Clicking the "Show Mana results" should trigger a modal window with
the heading "Results from Mana Knowledge Base."
- Test the subscription add process using a bibliographic record which
doesn't match anything in Mana. The message at the top of the page
should read, "No subscription found on Mana Knowledge Base"
TESTING TRANSLATABILITY
- Update a translation, e.g. fr-FR:
> cd misc/translator
> perl translate update fr-FR
- Open the corresponding .po file for JavaScript strings, e.g.
misc/translator/po/fr-FR-messages-js.po
- Locate strings pulled from
koha-tmpl/intranet-tmpl/prog/js/subscription-add.js for translation,
e.g.:
msgid "Next issue publication date is not defined"
msgstr ""
- Edit the "msgstr" string however you want (it's just for testing).
- Install the updated translation:
> perl translate install fr-FR
- Switch to your newly translated language in the staff client
and repeat the test plan above. The translated strings should
appear.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes the pickup location dropdowns that rely on Select2 and
the API use the new wrapper. The original transport function is removed
as it is now embedded in the wrapper.
To test:
1. Follow bug 29404 test plan
=> SUCCESS: All works
2. Apply this patches
3. Repeat 1
=> SUCCESS: All works!
4. sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch replaces the use of the jquery.cookie.js plugin in the
"Browse selected records" feature. The feature is modified to use
localStorage instead of cookies.
To test, apply the patch and go to Administration -> System preferences.
- Enable the "BrowseResultSelection" system preference.
- Perform a catalog search which will return multiple results.
- On the search results page, check the checkbox for a number of
titles.
- Click the "Browse selected biblios" button in the toolbar.
- You should be directed to the detail page for the first title you
checked.
- Clicking the right-arrow in the sidebar should take you
through each one of your selected titles.
- When you click the "Results" link in the sidebar you should be
returned to the same search results set and the same titles should be
checked.
_ If you uncheck those titles and reload the page the checkboxes should
remain unchecked.
- If you log out of the staff interface the "bibs_selected" item in
localStorage should be deleted. See, for example,
https://developer.mozilla.org/en-US/docs/Tools/Storage_Inspector for
information about viewing local storage.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch removes a few instances where the old cookie plugin was still
being used for deleting cookies even though the new plugin is being used
to set the cookies.
To test, apply the patch and test the following processes in the staff
interface:
Search to hold:
- View a patron record and click the "Search to hold" button.
- Perform a catalog search which will return results.
- On the search results page there should be a "Place hold for
<patron>" link under each holdable title.
- Click the "Place hold" button's dropdown arrow and choose "Forget
<patron>." The "Place hold for..." links should disappear.
Search to hold for a patron club:
- If necessary, create a patron club.
- Add one or more patrons to the club.
- In Tools -> Patron clubs, find the club you added patrons to.
- Click the "Actions" button and then "Search to hold."
- Perform a catalog search which will return results.
- On the search results page there should be a "Place hold for
<club>" link under each holdable title.
- Click the "Place hold" button's dropdown arrow and choose
"Forget <club>." The "Place hold for..." links should disappear.
Batch item modification show/hide columns:
- Go to Tools -> Batch item modification.
- Submit a list of items for modification.
- Uncheck some checkboxes to hide columns on the page showing the items
you submitted.
- In the browser's storage inspector (e.g.
https://developer.mozilla.org/en-US/docs/Tools/Storage_Inspector),
should see a "showColumns" cookie with a string of numbers and
slashes.
- Click the "Show all columns" checkbox.
- The "showColumns" cookie should disappear.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch removes the use of a specific "title-numeric" sorting routine
from the DataTables configuration of the "Most popular" table. We can
use a "data-order" attribute instead.
The patch also removes the now unused code from our custom DataTables JS
file in both the OPAC and the staff interface (where it was unused).
To test, apply the patch and make sure the OpacTopissue system
preference is enabled.
- In the OPAC, view the "Most popular" page.
- Change the filter settings, if necessary, to get multiple results.
- In the results table, confirm that sorting by number of checkouts
still works correctly.
A search of the code for instances of "title-numeric" should return only
one in a comment in the official DataTables library.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Button [Add multiple items] stops responding when it's pressed and some multiple items added to basket
It has a "visibility: hidden" we are trying to remove setting "display:
inline"
This is pretty ugly and certainly does not clean the code, but it's too
messy and this patch fixes the problem easily.
Test plan:
Add a new order
Click "Add multiple items", enter "2", click "Add".
Confirm that you can use the "Add multiple items" again.
Signed-off-by: Samu Heiskanen <samu.heiskanen@hypernova.fi>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds a kohaSelect wrapper function to simplify
paging/infinite scrolling with select2 using the Koha RESTful api's.
Invoke select2 select boxes as you normally would from JS, but instead
of calling .select2(config) use .kohaSelect(config).
If an 'ajax' property is defined in your config object, we wrap the
transport such that responses include a pagination key as expected by
select2.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Same as bug 29394, we want the flatpickr instanciations be done at the
same place, from calendar.inc. That way they will all behave
identically.
Test plan:
Edit a patron category and confirm that the "until date" calendar has
the "yesterday" and "today" dates disabled
Place a hold on an item, go to the patron detail page, click the "holds"
tab, suspend.
That should trigger a modal that will display a calendar with
"yesterday" and "today" dates disabled
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Bug 29404 moved code from request.tt into holds.js, and I didn't know
about the _() vs. __().
This patch fixes that.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
We don't need them. We could also remove the biblionumber but it
requires change to the controller I'd prefer to not do now.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
From holds list of a bibliographic record, the "unsuspend" button does not work as expected.
The form is submitted but the suspension is still there.
There are 3 requests, 2 GET and 1 POST.
One of the GET is rejected by Firefox (NS_BINDING_ABORTED)
Test plan:
Place some items on hold, play with suspend/unsuspend from the hold list
/cgi-bin/koha/reserve/request.pl?biblionumber=XX
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch adds a flag to the OPAC preferences file marking suggestion
title as mandatory OPACSuggestionMandatoryFields and excluded from
OPACSuggestionUnwantedFields.
The patch also modifies the markup around required fields in the OPAC
suggestion form to comply with changes made in Bug 27668 to mandatory
field styling.
To test, apply the patch and restart services.
- Test the OPACSuggestionMandatoryFields preference. In the modal,
"title" should be checked and the label in red. It should not be
possible to uncheck the checkbox.
- Test that the "Select all" and "Clear all" links don't affect the
"title" checkbox.
- Confirm that your selections are still saved correctly.
- Test the OPACSuggestionUnwantedFields preference. In the modal,
"title" should be unchecked and disabled.
- Test that the "Select all" and "Clear all" links don't affect the
"title" checkbox.
- Confirm that your selections are saved correctly.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
The code only dealt with 404, this patch makes it have a fallback
message for failure codes.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes the patron page (detail and circulation) use the API to
suspend/resume holds on the holds tab.
It previously used the old svc/ scripts we plan to replace.
To test
1. Have a patron with some holds
2. Play with suspending/resuming holds. Include the indefinite
suspension.
=> SUCCESS: Everything works as usual
3. Apply this patch
4. Repeat 2
=> SUCCESS: Nothing changed, a soft breeze surprises you
5. Sign off :-D
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
