Currently, all serials enumeration data is stored in conglomerated
fashion in serial.serialseq. This makes it extremely difficult to do any
reporting based on the individual sequence values due to this fact. In
addition to the formatted version of the sequence, we should be storing
the individual values as well.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Create a new subscription, and add serials to it. The new x y and
z fields should be populated with the same data the replaces {X} {Y} and
{Z} in the enumeration field.
4) Inspect some existing serials. The update script will have made a
best effort to recover the existing enumeration data to store in
separate fields.
Signed-off-by: Paul Landers <paul.landers@ttuhsc.edu>
This patch fixes the filename categorie.pl correcting it by categories.pl
The plurial is usually used for script names in the admin module.
Test plan:
Navigate to the patron categories page.
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
No reference to categorie.pl anywhere in the code
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch removes code related to stopwords usage. The following methods are removed:
C4::Search->remove_stopwords
C4::Context->stopwords
C4::Context->_new_stopwords
And the buildQuery API was changed (removed the \@removed_stopwords return value).
A follow-up is provided for database changes, to make rebasing easier.
To test:
- Apply this patch
- Do some searches in both intranet and opac interfaces
- Nothing should break
Sponsored-by: Universidad Nacional de Córdoba
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In C4/Letters.pm, sub _parseletter changes values that are passed by
reference. E.g. patron's expiry date can change from iso format to
syspref format, leading to strange behaviour in the calling routines
(see Bug 15423).
This patch makes sub _parseletter work on a copy of the referenced values.
(Submitted to get feedback - is this the way to go?)
Signed-off-by: Frédéric Demians <f.demians@tamil.fr>
Good solution to real time bomb.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
When searching a patron, search type can be 'start with' and 'contain'.
If the search text contains a space (or a coma), this text is splitted into several terms.
Actually, the search on 'start with' with several terms never returns a result.
It is because the search composes an "AND" SQL query on terms.
For example (I display only the surname part) :
search type = contain :
'jean paul' => surname like '%jean% AND %paul%'
search type = start with :
'jean paul' => surname like 'jean% AND paul%'
The query for 'start with' is impossible.
I propose, for search with start with, to not split terms :
jean paul => surname like 'jean paul%'
One can always use '*' to add more truncation :
jea* pau* => surname like 'jea% pau%'
This bug affects a lot surnames with several terms like 'LE GUELEC' or 'MAC BETH'.
Note that the patch moves :
$searchmember =~ s/,/ /g;
It removes the test "if $searchmember" because $searchmember is tested and set to empty string previously :
unless ( $searchmember ) {
$searchmember = $dt_params->{sSearch} // '';
}
Test plan :
==========
- Create two patrons with firstname "Jean Paul"
- Go to Patrons module
- Choose "Starts with" in "Search type" filter
- Perform a search on "Jean Paul"
=> without patch : you get no result
=> with this patch : you get the two results
- Check you get the two results for search on "Jean Pau"
- Check you get the two results for search on "Jea* Pau*"
- Check you do not get results for search on "Jea Paul"
- Choose "Contains" in "Search type" filter
- Check you get the two results for search on "Jean Paul"
- Check you get the two results for search on "Jean Pau"
- Check you get the two results for search on "Jea* Pau*"
- Check you get the two results for search on "Jea Paul"
- Check you get the two results for search on "Paul Jean"
Signed-off-by: Alex <alexklbuckley@gmail.com>
Tested 4 patches together, works as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Bug 15252 - Patron search on start with does not work with several terms - followup 1
'start_with' is the default value of $searchtype, it can be explicit.
Tested 4 patches together, works as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Bug 15252 - correct UT searchtype value is contain and not contains
Tested 4 patches together, works as expected
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Same as previously.
For these files it's a bit less obvious.
To make sure these changes won't introduce any regression, check that
the variable returned by GetMember is never used to get something
else than a borrower fields.
The 'flags' should not be get neither.
For opac-user.tt it's different, other keys are got but there are defined
in the pl script.
On the way:
- 'showname' is removed (never used)
- fix scope var issue in opac-user.tt (BORROWER_INF.OPACPatronDetails vs
OPACPatronDetails)
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This subroutine does a lot a processing and should only be called when
necessary.
In the get_template_and_user subroutine (so called from any pages of
Koha), it is call to pass the branchcode, title, firstname, surname and
borrowernumber values for the logged in user.
This subroutine calls GetMemberAccountRecords which retrieve the items
infos for all accountlines entries of the logged in user.
On members/members.pl, let's say you have 74 entries in the accountlines
tables, the page will execute 115 SELECT instead of 35 if you don't have any
accountlines entries.
With this patch, the number of SELECT is always 31.
To test this patch you should have technical skills to know what to do.
Note that USER_INFO was an array of... 1 element. Now it's a hashref.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Position 05 of the leader in MARC 21 indicates the record's status.
A lower case 'd' indicates that the record is to be deleted
(http://www.loc.gov/marc/authority/adleader.html).
This patch adds a cronjob script that may be run nightly to delete
records where position 05 of the leader is set to 'd'.
Test Plan:
1) Edit one or more records, and set the leader position 05 to 'd'.
2) Run misc/cronjobs/delete_records_via_leader.pl -c -v
3) Those records should either be deleted, or an error message should
state why they were not.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
Works as advertised. Edited a record with an item to have leader05 = d,
then ran delete_records_via_leader.pl with -c and got a message that
the record could not be deleted because of the item. Removed the item
and the script deleted the record. Tried with another record with an
item, this time with the -i option and the record was deleted.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch removes a limit in RIS.pm print_isbn sub.
To test:
1) Find in opac a book with an isbn with length(isbn) > 10
(with dashes or isbn13)
2) Export record to RIS format, check truncated SN field
in exported file
3) Apply the patch
4) Export again, no more truncation
Signed-off-by: jvr <jvr@fct.unl.pt>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch enable use of IntranetUserCss on staff client
login page.
To test:
1) Add something to IntranetUserCSS to modify login page,
for example
#login h1 a {
height:30px;
}
2) Logout from staff client, no changes on login page.
3) Apply the patch
4) Reload, now logo is cut in half :)
Bonus) Login again an try changing image, add
#login h1 {
background: url(http://example.com/img/other-logo.png) no-repeat top center;
}
and fix height. Logout and check
This also affects 3.20 and perhaps earlier versions.
Re-upload to fix examples
Works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
If the transfer of an item from Library A to Library B is disabled in
the Transport Cost Matrix, but the only item on a record is from Library
A, the holds queue will request a transfer of that item from Library A
to Library B even though the rules state such a transfer is not allowed!
Test Plan:
1) Enable the transport cost matrix
2) For simplicity, leave all cells disabled on it, save this state.
This state means that only items at each location should fill
holds where the pickup library is that same location.
3) Create a record with one item, set its home and holding branch
to Library A
4) Create a hold for pickup at Library B
5) Rebuild the holds queue
6) Note the transfer request for the item to Library B
7) Apply this patch
8) Rebuild the holds queue
9) Note the transfer request is gone
Signed-off-by: Andreas Hedström Mace <andreas.hedstrom.mace@sub.su.se>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Calling UNIVERSAL's internal methods will cause a depreciation
warning in perls less that 5.22 as of 5.22 the warning is a fatal
error causing compilation to abort
Replace the use UNIVERSAL with UNIVERSAL::can to work around the
buggy construct perldoc UNIVERSAL::can for more info
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No more worning/error
No qa errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
If no value for 'no renewal before' is specified, automatic renewal now
falls back on the due date. Also 'no renewal before' can now be zero, so
both automatic and manual renewals can be delayed until due date.
Test plan:
1) Create some circulation rules with different settings for 'No renewal
before' and 'Automatic renewal'. Both daily and hourly loans should
work.
2) Try to renew both manually and automatically before and after a renewal
should be possible. You can run misc/cronjobs/automatic_renewals.pl for
automatic renewal.
3) Confirm that:
* Both automatic and manual renewal with 'No renewal before' set
to 0 do not happen before the due date (exact DateTime).
* Manual renewal with 'No renewal before' set to undef (enter empty
string) is unrestricted.
* Automatic renewal with 'No renewal before' set to undef does not
happen before the due date.
Sponsored-by: Hochschule für Gesundheit (hsg), Germany
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
If an item is not checked out when a checkin via SIP2 is attempted,
Koha's SIP server sends back an "ok" of 0, and the AF message "Item
not checked out". I am not entirely sure this is good and correct
behavior by the SIP2 protocol.
In particular, this will cause SIP2 book sorting devices to fail on
all items that are not checked out, causing them all to be put into
the "special handling" been that should be reserved for things like
items checked in at the wrong library and items on hold.
Test Plan:
1) Apply the patch for bug 13159 so you can use the new enhanced
SIP2 command line emulator
2) Use a command similar to the following to check in an item:
sip_cli_emulator.pl -a localhost -su <sip user> -sp <sip password> -l <instituation id> --item <barcode> -m checkin
3) Note the 3rd character is 0, and there is an AF field saying the item is not checked out
4) Apply this patch
5) Restart the SIP server
6) Repeat steps 2-3, note that nothing has changed
7) In the SIP config file, Add the parameter checked_in_ok="1" to the SIP account you are using.
8) Restart the SIP server
9) Repeat steps 2-3, note that this time the 3rd character is 1, and you do not recieve the item not checked out message.
Signed-off-by: Benjamin Rokseth <benjamin.rokseth@kul.oslo.kommune.no>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
(See comment #23)
This patch removes stray C4::Dates (date_fromat...) from
C4/Items.pm
C4/Log.pm
C4/Serials.pm
serials/acqui-search-result.pl
t/DateUtils.t
t/db_dependent/Items/GetItemsForInventory.t
tools/koha-news.pl
Some of them were inside comments etc.
To test:
- git grep 'C4::Dates' should give no result
- git grep 'format_d' should give no result
Exception: in one cron job there exists an own sub format_date, and occurences not
related to C4::Dates
- Search for regressions
http://bugs.koha-community.org/show_bug.cgi?id=14870
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
serials/acqui-search-results.pl looks like it should be revisited,
containing code that might not be needed. Searching a vendor
in serials still works witout a problem.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
C4::Dates is mentioned as example in C4/Debug.pm. This patch removes it.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
http://bugs.koha-community.org/show_bug.cgi?id=14870
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Followup for comment #10
To test:
- Go to Home > Tools > Calendar
- Add, edit, delete the different types of holidays and exceptions
- git grep 'C4::Calendar' and test such files
- git grep daysBetween to make sure that this sub is not used
- prove t/Calendar.t
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes C4::Dates from:
Remove C4::Dates from:
- tools/exceptionHolidays.pl
- tools/holidays.pl
- tools/newHolidays.pl
- C4/Calendar.pm
To test:
- Go to Home > Tools > Calendar
- Add, edit, delete the different types of holidays and exceptions
- git grep 'C4::Calendar' and test such files
- prove t/Calendar.t
(Amended following comments #3 and #4 / mv)
(Amended following comment #7 / 25.10.2015 / mv
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
http://bugs.koha-community.org/show_bug.cgi?id=14945
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Warning: This area is a mess, especially with date management.
For the same reasons as other "Remove C4::Dates from*" patches, this one
will deal with the serials module.
Note that this patch add the datepicker on 3 input fields (on
serials/subscription-detail.tt and serials/subscription-renew.tt).
There was also weird behavior when the dates were invalid. Now default
to undefined. But with the datepicker it will reduce the number of
cases even if the user is still allowed to fill invalid dates.
Test plan:
1/ Create a subscription, fill the first issue pub date and the
subscription start date.
You can fill or not the end date.
Play with the numbering pattern and confirm that there are generated as
before this patch.
2/ On the check expiration page, confirm that the dates are correctly
displayed.
3/ Renew the subscription and confirm that the behavior is correct.
4/ Go on the subscription history page and confirm you have now the
datepicker plugin set on the 2 date fields.
QA notes: The startdate, histstartdate and enddate are not used in
the serials-collection template, this patch removes them from the pl
script.
Tested on top of 15166 15168 15171, full browser reload for date pickers.
Note for 4/: It is the link in tab planning on subscription
detail page, near "Manual history" (if manual history is enabled).
Works as advertised.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This subroutine has been introduced in 2006, when C4::Serials has been
added to the codebase.
If you checkout this commit
commit 18d2cd0990
Date: Fri Jul 7 08:45:47 2006 +0000
this file replace C4/Bull.pm
You won't find any occurrences of this subroutine neither.
Interesting module's name by the way.
Test plan:
git grep ItemizeSerials
should not return any result
Followed test plan, no results found.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
These 3 subroutines are not used anymore:
- CheckRepeatableHolidays
- CheckSpecialHolidays
- CheckRepeatableSpecialHolidays
Moreover we have subroutines in Koha::Calendar to do this job.
Test plan:
git grep CheckRepeatableHolidays
git grep CheckSpecialHolidays
git grep CheckRepeatableSpecialHolidays
should not return any results.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Subroutines removed
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch loads Koha::NorwegianPatronDB if it can, or adds a warning
to the log if it can't load it.
Since the Koha::NorwegianPatronDB functionality in C4::Members is
wrapped in system preferences, the loading of the module is
irrelevant unless one actually wants to use the module and its
associated functionality.
NOTE:
This patch fixes a problem where we were getting errors saying
Crypt::GCrypt couldn't be loaded even though it's not a required
dependency.
This patch will likely only affect people not using Debian-based
systems where libcrypt-gcrypt-perl is available. The current
version of Crypt::GCrypt doesn't build so it's not an option
for most non-Debian users to install this not required
dependency in order to work around this issue...
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised for Debian-based systems
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Conversion of MARC from ISO5426 is defined in C4::Charset::char_decode5426().
Each character or combined characters conversion is defined in a map.
This patch adds missing conversions.
See http://www.gymel.com/charsets/MAB2.html
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Conversion of MARC from ISO5426 is defined in C4::Charset::char_decode5426().
Each character or combined characters conversion is defined in a map.
This patch changes some odd actual conversions.
In char_decode5426(), only characters between 0xC0 and 0xDF will be used for combining with following charater :
($char >= 0xC0 && $char <= 0xDF)
So conversion like "$chars{0x81d1}=0x00b0" will never be used.
Rules for "h with breve below" use combining with 0xf9 but looks like the correct caracter is 0xd5.
See http://www.gymel.com/charsets/MAB2.html
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
If the biblionumber field is displayed in the framework, on editing a
biblio the field/subfield will be duplicated.
To prevent that this patch adds a check when building the field list.
Test plan:
1/ map biblio.biblionumber with 999$c
2/ Display 999$c in a framework
3/ Edit a biblio using this framework
4/ Save => The field should not have been duplicated
5/ map biblio.biblionumber with 001
6/ Display 001 in a framework
7/ Edit a biblio using this framework
8/ Save => The field should not have been duplicated
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works as described, aldo removes duplicate values.
No errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The code is much more readable using the str param of output_pref
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes 2 major errors introduced by last patch:
1/ Undefined subroutine &C4::Utils::DataTables::Members::dt_from_string
called
when searching for patrons
2/ Display the dates on the patron search in the pref format, not iso
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes C4::Dates from following files in folder C4:
- C4/Members.pm
- C4/Reserves.pm
- C4/Search.pm
- C4/Utils/DataTables.pm
- C4/Utils/DataTables/Members.pm
- C4/VirtualShelves/Page.pm
To test:
-run tests as appropriate,
- have a close look at the code changes
- try to find regressions
http://bugs.koha-community.org/show_bug.cgi?id=14985
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Bug 14985: (followup) Remove eval if dates come from database
This patch removes some evals from date-formatting where the dates come
from the database.
See comments #7 - #9
Additionaly, C4/VirtualShelves/Page.pm is removed from the patches (obsolete).
Bug 14985: (followup) Remove C4::Dates from C4/Overdues.pm
Ths patch removes a stray C4::Dates from C4/Overdues.pm
- To test got to a patron who has overdues
(Home > Circulation > Checkouts > [Patron])
- Print overdues
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Reopening or closing a basket should preserve the completed
status for receipted orders.
This patch excludes orderlines with the completed status
from having their status rewritten as a result of the
change in basket status
Made the subroutines involved more efficient by removing an
unnecessary loop and by not fetching a large amount of
superfluous data
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Also, add notes to perldocs and usage that payments and
credits are not linked to fines and may be deleted
independently of the associated fine.
Signed-off-by: Nancy Keener <nkeener@washoecounty.us>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
http://bugs.koha-community.org/show_bug.cgi?id=14402
Signed-off-by: Nancy Keener <nkeener@washoecounty.us>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Before this patch, the funds were sorted by budget_id, which does not
make any sense.
This patch adds a sort by budget_code on the fund list (acqui/acqui-home.pl and
admin/aqbudgets.pl)
Test plan:
On both pages (acqui/acqui-home.pl and admin/aqbudgets.pl) confirm that
the funds are now sorted by fund code (DB column budget_code)
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Sorts Patron's accounting data consistently from newest to oldest.
It doesn't depend on anymore to timestamp (which can be same for multiple
entries) from database but instead uses accountline's id to sort.
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In order to avoid loading Koha::NorwegianPatronDB a DB query was
used. Instead, a require should be used. This causes non-db_dependent
tests that load C4::Members to fail.
To test:
- Shut mysql down
$ sudo service mysql stop
- Run the tests:
prove t/Circulation_barcodedecode.t
=> FAIL: DB connection is expected, tests fail
- Apply the patch
- Run the tests:
prove t/Circulation_barcodedecode.t
=> SUCCESS: Tests pass
- Sign off .-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Fixes a trivial coding error.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Return from AddIssue used to be due date or undef.
Now it is less straightforward returning am issue object
if an issue row is created or undef. If the issue is a renewal
undef is returned. As that case was not handled properly it
caused the server site to crash the listener causing a
communications error on the client.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Add a new field serial.publisheddatetext for displaying published date
in another format that dateformat syspref permit.
Signed-off-by: Cedric Vita <cedric.vita@dracenie.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes the rendering of "COOP2of5" or "Industrial2of5" barcodes in the label creator module.
To test:
- Create a label layout with COOP2of5 barcode type
- Create labels (make sure that the items's barcode values are numeric only!)
- Export batch and download PDF.
Without patch:
- No barcodes rendered
With patch
- Barcodes should render as expected. Test for both barcode types.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Works as described, tested both formats.
Non digit barcode is not printed.
No koha-qa errors, no t/ & xt/ errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Note: To be printed, barcode should be numerical.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This script has scary FIXMEs and can be removed.
It is never called from Koha code.
On the way, this patch remove the C4::Budgets::ModCurrencies subroutine,
which was only called from this script.
Test plan:
git grep 'acqui/currency.pl
and
git grep ModCurrencies
should not return anything.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
No more ModeCurrencies, no call to acqui/currency.pl
No errors
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 14544: (follow-up) Get rid of ShelfPossibleAction
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This does not work for now, see later.
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Get rid of AddToShelf and DelFromShelf
Bug 14544: Allow a user to delete his own contents
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Koha Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch the 2 following errors:
Undefined subroutine &C4::RotatingCollections::transferbook called at
C4/RotatingCollections.pm line 451.
Undefined subroutine &C4::RotatingCollections::GetTransfers called at
C4/RotatingCollections.pm line 450.
And this warning:
"my" variable $colId masks earlier declaration in same scope at
/home/koha/src/rotating_collections/transferCollection.pl line 75.
Test plan:
Create a rotating collection
Transfer it to another branch
It should work with this patch
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Actual routes are:
/borrowers
Return a list of all borrowers in Koha
/borrowers/{borrowernumber}
Return the borrower identified by {borrowernumber}
(eg. /borrowers/1)
There is a test file you can run with:
$ prove t/db_dependent/rest/borrowers.t
All API stuff is in /api/v1 (except Perl modules)
So we have:
/api/v1/script.cgi CGI script
/api/v1/swagger.json Swagger specification
Change both OPAC and Intranet VirtualHosts to access the API,
so we have:
http://OPAC/api/v1/swagger.json Swagger specification
http://OPAC/api/v1/{path} API endpoint
http://INTRANET/api/v1/swagger.json Swagger specification
http://INTRANET/api/v1/{path} API endpoint
Add a (disabled) virtual host in Apache configuration api.HOSTNAME,
so we have:
http://api.HOSTNAME/api/v1/swagger.json Swagger specification
http://api.HOSTNAME/api/v1/{path} API endpoint
Add 'unblessed' subroutines to both Koha::Objects and Koha::Object to be
able to pass it to Mojolicious
Test plan:
1/ Install Perl modules Mojolicious and Swagger2
2/ perl Makefile.PL
3/ make && make install
4/ Change etc/koha-httpd.conf and copy it to the right place if needed
5/ Reload Apache
6/ Check that http://(OPAC|INTRANET)/api/v1/borrowers and
http://(OPAC|INTRANET)/api/v1/borrowers/{borrowernumber} works
Optionally, you could verify that http://(OPAC|INTRANET)/vX/borrowers
(where X is an integer greater than 1) returns a 404 error
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Some librarians would like to be able to print an overdues slip from the
staff intranet. This slip would be defined as the print transport
version of the ODUE slip.
Test Plan:
1) Apply this patch
2) Locate a patron with overdues
3) Define a print version of the OVERDUES_SLIP slip
4) Try Print > Print overdues
Signed-off-by: Amy Purvis <APurvis@galencollege.edu>
Signed-off-by: Laurie McKee <lmckee@littleelm.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Only superlibrarian users and users with superserials permission
can override this limitation.
This patch adds a new subroutine C4::Serials::can_claim_subscription.
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
The upgrading of the DB was as required:
for each [PT/S] patron with the permission "claim_serials" ON,
the permission "superserials" became[/was kept to] ON.
Then, after having checked the DB upgrading, to test the currently
adding limitation:
> Users can only claim for serials related to their branch
, I reset 2 PT/S patrons-users to:
permission claim_serials: YES
permission superserials: NO
and I set the syspref "IndependendeBranches" to "Prevent".
For:
> Only superlibrarian users can override this limitation.
the S patron-user could list AND claim:
A) subscriptions of his own branch,
B) subscriptions of other branch,
C) subscriptions without branch.
For:
> Only users with superserials permission can override this limitation.
the PT patron-user could list:
A) subscriptions of his own branch,
B) subscriptions of other branch,
C) subscriptions without branch,
and could claim only:
A) subscriptions of his own branch,
C) subscriptions without branch.
NB: a subscription is selected to be claimed.
Then I set the syspref "IndependendeBranches" to "Don't prevent".
The behaviour was [exactly the same as in master] without the added
limitation.
On [S/PT] patrons, if permission claim_serials was NO, no Claims
link was available on Serials' page, either under "Prevent" or under
"Don't prevent".
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Added the results of Paola's testing to the commit message
as test plan.
Note to RM: Maybe we could add a note to the release notes, that
Koha now enforces superserials with independent branches better,
so people might have to adapt permissions in order to claim
for other branches.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch add zebra indexes to RDA 264 field.
The new Provider index is added too.
QA comments corrected.
To test:
1) Download RDA records with 264 fields from this attachment <http://bugs.koha-community.org/bugzilla3/attachment.cgi?id=36825>. Import the file and re-index/rebuild zebra. These records contain 260 and 264 fields per record.
2) Do a search with pb:Bethany two records will appear with title The guardian. Search with pl:Minneapolis too, the two records will appear.
3) Select one record of both records and delete the 260 field keeping the 264 field and save, rebuild your zebra.
4) Search again with pb:Bethany and just one record will appear. Thats mean 264 is not indexed.
5) Apply patches.
6) Rebuild your zebra but this time all biblio records.
7) Search again with pv:Bethany or Provider:Bethany, this time will appear the two records, 264 is indexed. Note that if you search again with pb only one record appear. This is because the suggestion of LOC.
10) Search with copydate:2013 only launch records with 260 fields and pv:2013 show both fields, i.e., 260 and 264.
11) Apply QA Test Tools
Sponsored-by: Universidad de El Salvador
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Home > Acquisitions > Suggestions management:
Before 13813 the "from" date in filters was 0000-00-00 if not
filled, afer 13813 it's today.
This patch re-introduces 0000-00-00.
See http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=13813#c172
To test:
- Go to Home > Acquisitions > Suggestions management
- Verify that date filters work as expected
- Verify that start dates in sql query are 0000-00-00 if no start
dates are given
- Note: Line 185 outputs the start dates as warn if $debug is set.
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The SCO user should only be allowed to access to the SCO module.
This patch make the session ends if the user tries to access another
page after the SCO module.
Test plan:
0/ Configure the SCO module correctly
1/ Go on the sco main page (sco/sco-main.pl)
2/ Try to go somewhere else: you should not be logged in
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds loading of hideinopac and searchgroup
when showing/editing itemtypes
To test:
1) Put some values in ITEMTYPCAT auth value
2) Edit an item type, select a value for
search category & check 'Hide in OPAC'
Save
3) Results do no show on list of item types
4) Edit same item type, values are default/empty
5) Apply the patch
6) Edit again, change again, save
Now values shows in list
7) Edit again, values are now correct
Values were saved on db, but not loaded from it
How this happen?
Side note: searching for searchcategory I found
installer/data/mysql/kohastructure.sql: searchcategory varchar(80) default NULL, -- Group this item type with others w
installer/data/mysql/updatedatabase.pl: ADD searchcategory VARCHAR(20) DEFAULT NULL
Its varchar(80) in kohastructure and varchar(20) in updatedatabase
We need more eyes :)
Signed-off-by: Nicole Engard <nengard@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Patch to remove deprectated C4::Dates from:
- circ/circulation.pl
- C4/Circulation.pm
- koha-tmpl/intranet-tmpl/prog/en/modules/circ/circulation.tt
To test:
- Apply patch
- Go to the checkout site (Home > Circulation > Checkouts)
- Verify that data displays properly (including for users with a card
that expires in the near future, see syspref 'NotifyBorrowerDeparture')
- Search for regressions
- prove -v t/db_dependent/Circulation.t
(Amended following comment #9 / #11 25.10.2015 /mv)
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
So, this one is VERY weird, let me try to explain what I have
understood.
Bisecting using run prove t/db_dependent/Search.t, I have found that the
following commit make the test fail:
commit 0f63f89f66
Bug 14100: Generic solution for language overlay - Item types
The error is
DBI bind_columns: invalid number of arguments: got handle + 0, expected handle + between 1 and -1
Usage: $h->bind_columns(\$var1 [, \$var2, ...]) at /usr/lib/i386-linux-gnu/perl5/5.20/DBI.pm line 2065.
Note that the interface (admin/itemtypes.pl) which calls the same
subroutine with the same parameter (style => 'array') works great.
The problem comes from the change in C4::Search::searchResults, if I
only apply the change done to this subroutine on 0f63f89f^1, I reproduce
the issue.
Looking closely at how %itemtypes is built, we could actually call
GetItemTypes with the style => 'hash' to get exactly what we want.
The following piece prove it for you:
use Test::More;
use C4::Koha;
my $i = GetItemTypes;
my $j = GetItemTypes(style => 'array');
my %itemtypes;
for my $itemtype ( @$j ) {
$itemtypes{ $itemtype->{itemtype} } = $itemtype;
}
is_deeply( \%itemtypes, $i);
So changing the code accordingly and just forget this last hour...
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
prove t/db_dependent/Items.t
Undefined subroutine &C4::Languages::getlanguage called at C4/Items.pm line 1304.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
undef error - Undefined subroutine &C4::Languages::getlanguage called at C4/Koha.pm line 250.
Test plan:
prove xt/author/valid-templates.t
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
* Apply dependant patches 14246 and 14247.
* Apply current patch.
* Log into the Staff client, go to
'Administration' -> 'Global Preferences' -> 'Tools',
a new section titled 'News' should appear with a single option named 'NewsAuthorDisplay'.
Available values should be 'Not at all', 'OPAC only', 'Staff client only' and
Both OPAC and staff client'. By default the value should be 'Not at all'
(to mimic existing behaviour, important!).
* Change the value to something different and save the changes.
* Go to 'Tools' -> 'News' and add some news items (at least 2).
* Use the MySQL command line tool to edit the opac_news table,
removing the user id from one of the news items:
$ mysql -u kohaadmin -p -D koha
> SELECT `idnew`, `title`, `borrowernumber` FROM `opac_news`;
* Make a mental note of one of the 'newid' numbers to change.
> UPDATE `opac_news` SET `borrowernumber` = NULL WHERE `idnew` = <your-id-here>;
* Now one of the news items will have no user id, and no author should be shown for it.
* Go to OPAC and Staff client and make sure the display modes works as intended.
* Repeat for all values, making sure that the settings works as intended.
* The changed news item should have no author info shown at any time.
* The unchanged news item should show your own user name if the
settings match the section where it is displayed.
Sponsored-By: Halland County Library
Tested on top of Bugs 1246 and 1247, works as advertised.
Note: Some whitespaces changed / removed in koha-news.tt to pass qa tools.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch fixes:
- reports/bor_issues_top.pl
- sort order
- adv search and search results
- opac-topissues.pl
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1/ update the Schema (misc/devel/update_dbix_class_files.pl)
2/ Translate templates for some languages (es-DE, de-DE for instance)
3/ Enable them in the pref (search for 'lang') for the staff interface
4/ Go on the item type admin page (admin/itemtypes.pl)
5/ Edit one
6/ Click on the 'translate for other languages' link
7/ You are now on the interface to translate the item type's description
in the languages you want. So translate some :)
8/ Go back on the item type list view (admin/itemtypes.pl)
9/ You should see the original description (non translated)
10/ Switch the language
11/ You should see the translated description in the correct language.
If the description is non translated, the original description is
displayed.
12/ On the different page where the item type is displayed, confirm that
the translated description appears.
Think further / Todo:
1/ Update all occurrences of the item type's description (DONE)
2/ Implement for authorised values
3/ Implement for syspref value (at least textarea)
4/ Implement for branch names
5/ Centralize all the translation on a single page in the admin area
...
N/ Implement a webservice to centralize all the translations and give
the ability to sync the item types/authorised values description with
the rest of the world (push and pull).
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This followup introduces a major change; instead of subfields starting
with '$<code><space>', they now start with '‡<code>'. The double-cross
character can be typed with Ctrl-D.
It also fixes the following:
* Add UUID.pm dependency
* Remove debugging call
* Fix toLocaleFormat error reported by Nick Clemens
* Ignore subfields that are marked as unrepeatable/mandatory AND
ignored (tab is -1)
* Mention lack of support for UNIMARC/NORMARC fixed fields in system
preferences screen
* Confirm when user creates new record and current record is modified
* Perform better when importing gigantic record dump
* Show "Edit" instead of "Import" and allow direct editing for local
catalog records in search screen
* Add "Keyboard shortcuts" help button to toolbar
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
* Extends login screen to pass along #hash
* Adds JSONP support to C4::Service
* Extends humanmsg to allow per-message classes
* Adds proper charset to results of svc/bib
Test plan:
1. C4/Auth.pm and .../intranet/.../auth.tt: verify that login/usage
works as expected, despite the change to pass on the fragment (...#blah)
from the URL.
2. C4/Service.pm and humanmsg.js: verify that editing system
preferences (the main user of these modules) works correctly despite
updates.
3. svc/bib: verify that records can be correctly downloaded with the
change of character set. This can be done in a Firebug/Chrome Devtools
console by running `$.get('/cgi-bin/koha/svc/bib/1')` and inspecting the
results (possibly replacing 1 with a different valid biblionumber).
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Since bug 10803 adds a C4::Search::History module, the
PurgeSearchHistory routine should be moved.
Test plan:
- run misc/cronjobs/cleanup_database.pl with the searchhistory param and
verify behavior is the same as before applying this patch.
- run prove t/Search/History.t
Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes 2 types of warnings when
creating Labels
a) Using '0' as filling char is not to the like of prStrWidth
On C4/Creators/Layout.pm
b) A RM followup from Galen on Bug 8375 to C4/Creators/PDF.pm
makes impossible to find properly a font :(
(http://git.koha-community.org/gitweb/?p=koha.git;a=commit;h=f7ef93e758850e991091e7268b8d1b1453082df4)
on C4/Labels/Label.pm
To test:
Pre patch
1) Go to Tools > Labels
2) Create a new layout, name ABC, type 'Barcode/Biblio'
3) Create a new batch, add 2 items
4) Export as PDF using the new layout
5) Look at logs, you will find something like
a) label-create-pdf.pl: Use of uninitialized value $strwidth in numeric lt (<) at /home/bgkriegel/kohaclone/C4/Creators/Layout.pm line 233., referer: http://staffdev.koha-community.org.ar/cgi-bin/koha/labels/label-print.pl
(Only one of this kind)
b) Two related lines similar to this examples
label-create-pdf.pl: Use of uninitialized value in -e at /home/bgkriegel/kohaclone/C4/Creators/PDF.pm line 226., referer: http://staffdev.koha-community.org.ar/cgi-bin/koha/labels/label-print.pl
label-create-pdf.pl: ERROR in koha-conf.xml -- missing <font type="Ft1">/path/to/font.ttf</font> at /home/bgkriegel/kohaclone/C4/Creators/PDF.pm line 229., referer: http://staffdev.koha-community.org.ar/cgi-bin/koha/labels/label-print.pl
(many many lines x number of items on batch)
6) Apply the patch
7) Export the same PDF, no more warnings
8) Bonus 1: change main font to Courier and Helvetica
and check results
9) Bonus 2: check using arabic records
Many hours to find :(
Easy to fix
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes C4::Dates from files:
- reports/guided_reports.pl
- reports/dictionary.pl
- C4/Reports/Guided.pm
To test:
- Go to Home > Reports > Guided reports wizard
- Then go to 'View Dictionary' (menue at teh left)
- Click 'New definition' and step through
- In step 2. select e.g. borrowers
- In step 3 select a date field
- In step 4, select date range and test start / end dates
- In step 5, verify that dates display properly
- Save and verify that dates are insertet properly in sql definition
- Go back to Home > Reports > Guided reports wizard
- Step through the wizard and verify that it works as before.
http://bugs.koha-community.org/show_bug.cgi?id=14982
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
For an unkown reason, when executed from a test file, the 'SHOW COLUMNS'
statement does not return anything.
We need to retrieve the column list from the DBIx::Class resultset.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Warning: This patch modifies a module!
What's the need of the binary function here?
The data are case insensitive, so no need to use this mysql function.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Note that this tests file were completely buggy before.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Right now, Koha only charges fines at the end of a given charge period.
For example, let us assume a circulation rule has a charge period of one
week ( 7 days ) and a fine of $5. This means that an item can be overdue
for 6 days without accruing a fine. Koha should allow circulation rules
to be configured to place the charge at the start of the end of the
charge period so the library can decide when the fine should accrue.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) prove t/db_dependent/Circulation_Issuingrule.t
4) prove t/db_dependent/Circulation.t
5) prove t/db_dependent/Fines.t
6) Ensure you can still create/edit circulation rules
Edit: I removed the DBIx changes after a couple minutes fighting with them.
Will regenerate as usual in a RM followup / Tomas
Signed-off-by: Daniel Grobani <dgrobani@samuelmerritt.edu>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Tested with syspref 'AdvancedSearchTypes' set to itemtypes an ccode (one at a time).
No problems found.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
- "Item" and not "Document" is the word used throughout Koha.
- Moved the updates to an atomic update
- changed searchcategory from varchar(20) to (80)
- cleanup
This allows to group certain item types in a category, to be displayed (and searched) as such in OPAC's advanced search. For example, you can group Reserve 2h and Reserve 12h into a Reserve category. The 2 and 12h types won't appear anymore.
This also allows to simply prevent an item type from displaying as a search option.
TEST PLAN
------------------
0) Back up database, so you can reset and retest easily. ;)
1) Apply the patch
2) Run Koha QA tool.
3) prove -v t/db_dependent/Koha.t
-- all tests should pass.
4) run ./installer/data/mysql/updatedatabase.pl to add the
two columns to itemtypes
-- Does a meaningful message get printed?
Are the columns added?
"DESCRIBE itemtypes;" should list hideinopac and searchcategory.
5) You need to add a category to group your item types:
a) In Intranet/Koha Admin/Authorized values,
select DOCTYPECAT in the 'Show category:' dropdown
i) If you do not have a DOCTYPECAT category, create one.
b) Click button "New authorized value for DOCTYPECAT"
c) Enter
Authorized value: HARDWARE
Description : Hardware
Description (OPAC): Hardware
6) Group your items under that new category
a) In Intranet/Koha Admin/Item types, choose (at least)
two item types and for each:
- Click action/Edit on the right column
- Third row (below Description) is the Search category list box, select Hardware
- click Save changes at the bottom
7) Select at least one item to be hidden in the OPAC search
a) In Intranet/Koha Admin/Item types (again), choose a different item type:
- Click action/Edit
- Click the checkbox "Hide in OPAC" below the list of icons.
8) Go test your modifications
a) Go to OPAC/Adv search.
b) Validate that all items modified above (hidden or grouped) do not appear in Item type list
c) Validate that new item type Hardware does appear instead.
d) Select item Hardware, start Search.
) Validate returned items are the of the two types that were grouped into the Hardware category in step 4.
Sponsored-by: Vanier college
Signed-off-by: Nick <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test:
- Set autoBarcode = <branchcode>yymm0001
- Make sure you have a serial that is set to "create an item record
when receiving this serial"
- Receive an issue
- Click in the barcode field - nothing happens
- Apply patch and reload page
- Receive an issue
- Click in the barcode field - a barcode conforming to the
hbyymmincr setting appears
Patch works as advertised.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds a checkbox on Label creator
to use or not an oblique variant of main font
for title
Also fix font selection for title in case an
oblique variant is used.
To test:
Before patch
1) Go to Tools > Label creator
2) Create a new layout, default values but select
any 'Oblique' variant for main font and
'Biblio/Barcode' for layout type
3) Go to Manage batches, create a batch, add items,
export PDF, download
4) Check logs, you must find a line with
'ERROR in koha-conf.xml -- missing <font type="COO">'
for example if main font Courier-Oblique
5) Open PDF, title could be right but not using selected font
After patch
6) Apply the patch
7) Run updatedatabase.pl
8) Repeat 1-2, note new checkbox 'Oblique title',
default checked
9) Repeat export, no new warnings on log
10) Create a new layout or edit an existent one,
uncheck 'Oblique title', save, export again
Check PDF has non slanted title
Followed test plan, works as expected. (See comment #11).
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
As noted in the bug report, there is a typo.
This corrects that typo in documentation.
TEST PLAN
---------
1) perldoc C4::Items
2) Find GetItemsForInventory
-- note that status is spelt incorrectly.
3) Apply patch
4) repeat steps 1-2
-- note that status is spelt correctly now.
5) git diff origin/master
-- note only that line changed.
6) run koha qa tools
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
This typo patch could hit the highway to master at high speeds.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended patch: add a comma at the end of the line
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Currently the date of the order reception is the date of shipping date,
which is wrong.
This patch makes this date editable (with default is today).
Test plan:
1/ Create an order and receive it
2/ Confirm that you can edit the reception date and it's take into
account as the datereceived.
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch introduces 2 sysprefs :
RestrictionBlockRenewing to allow/block renewal of items when patron is restricted.
OverduesBlockRenewing to allow, block only the late ones or block all checked out items
Default is "allow" in both case.
Signed-off-by: Matthias Meusburger <matthias.meusburger@biblibre.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
C4::Letters::_parseletter will replace reserves.expirationdate with the
date a hold will be marked as problematic ( holds over ) if both
ReservesMaxPickUpDelay and ExpireReservesMaxPickUpDelay are enabled.
There is no reason this feature needs to rely on
ExpireReservesMaxPickUpDelay as there are many libraries that would like
to send the last day to pick up a hold in notices, but would rather deal
with the expired waiting holds manually rather than have Koha cancel
them automatically.
Test Plan:
1) Apply this patch
2) Set ReservesMaxPickUpDelay to 7
3) Disable ExpireReservesMaxPickUpDelay
4) Add reserves.expirationdate to your HOLD notice
5) Fill a hold for a patron
6) View the message, not that reserves.expirationdate is replaced
with the date the hold will be marked as problematic
Signed-off-by: Karl Holton <kholten@switchinc.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Move the 2 specific 'en' files outside of the language directory.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
These 2 fields are not used anymore, but we want to keep them anyway.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
Create an order for an existing biblio, confirm that the pagination links work correctly.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
CGI->url does not return the correct url on install using packages.
Test plan:
1/ Try to reproduce the bug from the description of bug 15005.
You should be able to login to the intranet and the OPAC
2/ Send a basket and a list from the intranet and the OPAC.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
GetBranchBorrowerCircRule should return the value for maxissueqty and
maxonsiteissueqty. It's what this patch does.
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
With this patch, the user will know why the checkout is refused.
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch set adds the ability to defined independent quotas for on-site
checkouts.
This will be done using the circulation rules matrix where a new column
“Current on-site checkouts allow” will be added.
This feature is going to use the same method as the existing fields maxissueqty
("Current checkouts allowed"), the new fields will be added to the
different tables (see the "DB changes" patch) and will be named
maxonsiteissueqty (for consistency).
In order to keep the existing behavior and to let more flexibility,
a new system preference is added (ConsiderOnSiteCheckoutsAsNormalCheckouts).
This syspref will let the liberty to the library to decide if an on-site
checkout should be considered as a "normal" checkout or not.
To keep the existing behavior, the syspref will be disabled (i.e. an on-site
checkout is considered as a normal checkout) and the number of on-site
checkouts will be the same as the number of checkout (maxissueqty ==
maxonsiteissueqty).
Technically:
There are only very few tests for the Circulation module, and the 2
subroutines impacted by this patch set were not tested at all.
It is necessary to introduce non-regression tests for this area.
The 2 subroutines are: C4::Circulation::GetBranchBorrowerCircRule
and C4::Circulation::TooMany (only called by
C4::Circulation::CanBookBeIssued, so we will take the liberty to change
the prototype to raise a better warning to the end user).
Test plan:
I. Confirm there is no regression and the existing behavior is kept
0/ Let the syspref disabled
1/ Set a rule to limit to 2 the number of checkouts allowed
2/ Do a normal checkout
3/ Do an on-site checkout
4/ Try to checkout (on-site or normal) an item again.
You should not be allowed.
II. Test the new feature - pref disabled
0/ Let the syspref disabled
1/ Set a rule to limit to 2 the number of checkouts allowed and to 1
the number of on-site checkouts allowed.
2/ Do an on-site checkout
3/ Try to do another one, you should not be allowed to do it.
4/ A normal checkout should pass successfully
Note that it does not make sense to have the number of on-site checkouts
alowed > number of checkouts allowed.
III. Test the new feature - pref enabled
0/ Enable the syspref
Now an on-site checkout is *not* counted as a normal checkout.
This means you can have the number of on-site checkouts > number of
checkouts allowed.
1/ Set the values you want for the 2 types of checkouts (normal vs
on-site).
2/ Even if a patron has reached the maximum of checkouts allowed, he
will be allowed to do a on-site checkout (vice versa).
IV. Stress the developper
Using the different configurations available in the circulation matrix,
try to find one where the checkout is allowed and not should be.
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
- remove DateTime->now()
- use Koha::DateUtils->dt_from_string;
- use Pod2usage for the usage
- use Modern::Perl
- use branches table
- Change letter code from MEMEXP to MEMBERSHIP_EXPIRY
- review comments implemented
- fix qa script comments
Bug 6810 - Fix QA failures
- MembershipExpiryDaysNotice system preferences arragned alphabetical order.
Bug 6810 - Add sample notices
- review comments implemented
- default value of is_html field in letter table is 0
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Bug 6810 - Fix QA failures
- Use KohaDates to convert dateexpiry
- remove MYSQL specifics methods for date handling in
GetUpcomingMembershipExpires
- make the script membership_expiry.pl write in Koha system logs
- add tests
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Bug 6810 - Fix QA failures:
- use Koha::DateUtils instead of Koha::Template::Plugin::KohaDates,
- Add test with syspref MembershipExpiryDaysNotice equals 0 and undef,
- fix (new) test failure (when MembershipExpiryDaysNotice is undef).
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
A new crontab based perl script to send membership expiry reminders. A
system preference controls the number of days in advance of membership
expiry that the notices will be sent on.
To Test:
1) Create a new Patron and set membership expiry date 14 days from the
date of registration.
2) Check your systemprefence ( MemExpDayNotice to 14 days default value)
3) Manual testing Run ( perl membership_expiry.pl -h)
It would give you various option:
This script prepares for membership expiry reminders to be sent to
patrons. It queues them in the message queue, which is processed by
the process_message_queue.pl cronjob.
See the comments in the script for directions on changing the script.
This script has the following parameters :
-c Confirm and remove this help & warning
-n send No mail. Instead, all mail messages are printed on screen.
Useful for testing purposes.
-v verbose
Do you wish to continue? (y/n)
4) Choose option for ex: perl membership_expiry.pl -c
5) Go to your koha database and check message_queue table you see some
results.
6) Run (perl process_message_queue.pl) it will send email to those
patron whose membership after 14 days from today.
7) Cron testing: (10 1 * * * $KOHA_CRON_PATH/membership_expiry.pl -c)
8) Set your 15 * * * * $KOHA_CRON_PATH/process_message_queue.pl
9) After running membership_expiry.pl, (process_message_queue.pl will
send emails to those patron whose membership after 14 days from
today).
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This is a(nother) vestige of Koha (2.2?).
This patch removes unused code related to the 'ethnicity'.
In detail:
There is no way to fill the ethnicity table.
There is no way to fill the borrowers.ethnicity and borrowers.ethnotes.
BUT if borrowers.ethnicity exists, the value is displayed on
members/moremember.pl (and only here).
Test plan:
Apply this patch and confirm there is no regression on
adding/updating/deleting patrons.
Note that you don't see the ethnicity value on the moremember.pl page even if a patron has it.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Koha is currently not engineered to handle multiple holds per record.
Until such time that is does, we should not allow them to be created.
Test Plan:
1) Apply this patch
2) Log in to the opac
3) Place a hold
4) Hit the back button on your browser
5) Place the hold again
6) Note the new message
Signed-off-by: David Kuhn <kuhn@monterey.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The subscriptionid should not be escaped and placeholders used.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Bug 10855: FIX: Add additional fields for closed subscriptions
Bug 10855: Fix instance vs static method
This patch fixes the error message.
The 3 modified routines *are* static methods.
Bug 10855: FIX conflicts with bug 7688
Bug 10855: Fix typo addition_fields -> additional_fields
Bug 10855: A partial search should return the subscriptions
If a search on an additional fields is done using a partial string
("foo" and the defined value is "foobar"), the subscription should
appear in the result list.
Test plan:
Try to search a part of the string for an additional field.
Bug 10855: Filtering on additional fields don't work if value is equal to 0
If you tried to filter on an additional field linked to an authorised
value, that did not work if the value was 0.
Bug 10855: Remove the advanced serial search box on the serial home page
Bug 10855: FIX an add field should not be created if the marc field does not exist.
This patch fixes the following:
Create an add fields linked to a nonexistent marc field (does not exist
in serials).
Edit a subscription and save.
Without this patch, an error occured:
Software error:
DBD::mysql::db do failed: Column 'value' cannot be null at
/var/root-koha/bug-10855/Koha/AdditionalField.pm line 107.
Bug 10855: Fix Type table vs tablename
Koha::AdditionalField->all method take "tablename" not "table" in
parameter".
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
- create some serials in late.
- go on serials/claims.pl.
- choose a vendor.
- verify that additional fields are displayed in new columns.
- try filters on columns.
- verify there is no regression on this page.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Now you will abble to search subscriptions by additional fields.
The additional field values will be displayed in the table results.
Test plan:
- go on the subscriptions advanced search page
(serials/serials-search.pl).
- verify all searchable additional fields are displayed on the form.
- combine 1 or more values and verify results are consistent.
- verify the values are displayed in new columns of the table.
- for field linked to an authorised value category, the description is
displayed (not the code).
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch adds the ability to add values for additional fields when
adding/updating a subscription.
Test plan (test the following on adding a new subscription and on
editing an existent one):
- add/edit a subscription.
- verify all additional fields appears into the "Additional fields"
block.
- fill a value for af1 and af3.
- fill others values if you are adding a new subscription.
- save.
- verify values appears on the detail of the subscription page.
- verify the af2 field is automatically filled with the specified
marc field of the notice.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The permanent_location should not be set to CART or PROC when the item
is edited.
Otherwise we lost an important info.
Test plan:
0/ Set the ReturnToShelvingCart pref
1/ Create an item with location "on_my_shelf"
2/ Check the item in and out
3/ Look at the DB values, location should be "CART" and
permanent_location unchanged (on_my_shelf)
4/ Edit the item, add a note for instance
5/ Without this patch, the permanent_location is erased with 'CART' and
you have definitely lost the info.
With this patch, the permanent_location is unchanged.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
this patch adds Koha::Cache functionality to the 'single_holidays' table
it is a performance patch for the problem described in BZ14315, only
http://bugs.koha-community.org/bugzilla3/show_bug.cgi?id=14315
it replaces slooow DateTime holiday objects with simple Ymd strings (19991230), then stores the strings in an @array using Koha::Cache
it does not attempt to add caching to all holiday tables - just the single_holidays table (at this stage
on my test (master-cd9a827); nytprof showed a time reduction of the single_holidays() sub - from 61.7s to 587ms
here are some before/after nytprof runs, (really on master-cd9a827, not 3.20)
http://x1.kohaaloha.com/i/nyt-bz14522-before/home-mason-g-k-3-20-x-Koha-Calendar-pm-1485-line.html#237http://x1.kohaaloha.com/i/nyt-bz14522-after/home-mason-g-k-3-20-x-Koha-Calendar-pm-1485-line.html#280
to test...
1/ add a bunch of single_holidays to your test koha, (my table has 400 holiday rows)
2/ add a loong circ rule for an itemtype (my rule has 140 days)
3/ checkout an item to a user (took me 67 secs)
apply patch...
4/ return item
5/ repeats steps 1..3, (took me 6 secs)
6/ add/change/delete some various single_holidays, via Home->Tools->Calendar
ensure that your various changes have indeed saved correctly
for extra points...
7/ run tests t/Calendar.t and t/db_dependent/Holidays.t, with all tests pass OK
sudo koha-shell -c ' export PERL5LIB=/home/mason/g/k/master ; \
cd /home/mason/g/k/master ; perl t/Calendar.t ; perl t/db_dependent/Holidays.t ' testkoha
8/ run QA tool, with all tests pass OK
sudo koha-shell -c ' \
export KOHA_CONF=/etc/koha/sites/mayo2/koha-conf.xml \
export PERL5LIB=/home/mason/g/k/master:/home/mason/qa-test-tools/ ; \
cd /home/mason/g/k/master ; perl /home/mason/qa-test-tools/koha-qa.pl -c 1 ' testkoha
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Test plan:
1/ Make sure you have non ASCII chars in the title and the authors.
2/ Export the record in RIS
You should not see any encoding problems.
Signed-off-by: Magnus Enger <magnus@libriotech.no>
Before patch: RIS file has wrongly encoded chars
After patch: RIS file has no endcoding problems
Tested on a NORMARC setup.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Tested on a MARC21 and a UNIMARC database.
Problem only confirmed for UNIMARC, but no regressions in MARC21.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
If batch of records is used to overlay existing records, and one of
those records is deleted, any attempt to revert this batch will fail.
The unanimous consensus is that deleted records should stay deleted (
https://lists.katipo.co.nz/public/koha/2015-June/043048.html ).
Test Plan:
1) Import a batch of records
2) Import the same batch again, using ISBN as a matcher for overlay
3) Find a record that overlayed a previous record and delete it
( the match type will be "match applied" and there will be a link in
"match details" )
4) Attempt to revert the second batch ( that overlayed the first )
5) The progress will stop at some point and never complete
6) Apply this patch
7) Attempt to revert the second batch again
8) This time it should succeed!
Signed-off-by: Do, Tam T <tdo@albright.edu>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
The new Upload.pm, unit test and file-upload.js obsolete a number of
files, including an older jQuery plugin.
The test files progressbar.pl and progressbarsubmit.pl are outdated and
do not serve any purpose in this form. (Actually, we could argue if they
should be here or just be part of a debugging phase.)
Test plan:
[1] Git grep on file-progress, file-upload.inc, UploadedFile,
ajaxfileupload, ajaxFileUpload
UploadedFile: Only a reference to DBIx file is found
ajaxfileupload: Only release notes
[2] Upload a file with tools/upload and stage-marc-import.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Julian Maurice <julian.maurice@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
If a record has a hold on it where the pickup and home branch do not
match, the holds queue builder will only look at items from the least
cost branch ( as defined by the transport cost matrix or the sys pref
StaticHoldsQueueWeight.
Test Plan:
1) Create a record with two items, one for library A and one for library B
2) Set your circulation rules such that the book from library A is
holdable by all and the book from library B is holdable only by library
B patrons
3) Create a hold for a Library C patron for pickup at library C
4) Set the syspref StaticHoldsQueueWeight to by Library B, Library A,
Library C in that order
5) Rebuild the holds queue
6) Note the hold wasn't picked up even though the item from library A
could have filled the hold
7) Apply this patch
8) Rebuild the holds queue
9) View the holds queue again
10) Note the hold now displays
Signed-off-by: Nora Blake <nblake@masslibsystem.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
It is possible to create holds with duplicate priorities.
The reason for this is that typically the priority is calculated before
placing the hold. When the hold is placed the priority is calculated.
This can easily be shown by opening up two browser windows and starting
to place a hold for a record in each one. You'll see that both list the
same priority. If you than place the hold in each window, both holds
will have the same priority!
Test Plan:
1) Run unit tests pre-patch, note they fail
2) Run unit tests post-patch, note they succeed
Signed-off-by: Heather Braum <hbraum@nekls.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Follow-up for reports.
Test plan:
1/ Use a translated template (fr-FR or ar-Arab)
2/ Go on the report guided page, step 3
3/ The field names should be correctly encoded.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan:
1/ Use a translated template (fr-FR or ar-Arab)
2/ Go on the tools/import_patrons.pl page
3/ The field names in the "default values" block should be correctly
encoded.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test plan: See Bugzilla.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Previous patches attached to this bug have been refactored to merge bug
3206 and bug 13568 features. So OAI server must be carrefully tested to
ensure that there is no regression in this area: deleted records and
resumption token.
This last patch fixed the way items are returned. They are returned only
if OAI server operates in extended mode, and specifically for format
having the parameter include_item set to 1 (true). For example this
configuration file set via OAI-PMH:ConfFile syspref will return items:
Signed-off-by: Signed-off-by: Gaetan Boisson <gaetan.boisson@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Signed-off-by: Gaetan Boisson <gaetan.boisson@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This allows the OAI-PMH service to not provide item information when
there is a rule that would supress it in OpacHiddenItems.
Test plan:
* Find an OAI-PMH URL that shows you some items.
* Add an entry to OpacHiddenItems that would block that.
* Check that it's blocked.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Tested, playing with OpacHiddenItems. GetRecord OAI verb returns a record
complying with OpacHiddenItems rules, for example without items from a specific
library.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Signed-off-by: Gaetan Boisson <gaetan.boisson@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
GetRecord for OAI-PMH was pulling the MARCXML directly from the
database. Now it uses GetMarcBiblio and includes the item data with it,
making it more generally useful.
Test plan:
* Run an OAI-PMH query, for example:
http://koha/cgi-bin/koha/oai.pl?verb=GetRecord&identifier=KOHA-OAI-TEST:52&metadataPrefix=marcxml
to fetch biblionumber 52
* Note that it doesn't include the 952 data
* Apply the patch
* Do the same thing, but this time see that the 952 data is at the
bottom of the MARCXML.
Note:
* This patch also includes a small tidy-up in C4::Biblios to group
things semantically a bit better, so I don't spend ages looking for a
function that was staring me in the face all along again.
Signed-off-by: David Cook <dcook@prosentient.com.au>
Works as described. Simple yet useful patch.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
952/995 item fields are back in response to GetRecord OAI verb.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Signed-off-by: Gaetan Boisson <gaetan.boisson@biblibre.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
The original patch correctly unmasks the global variable (by
removing the 'my' on the marc2ris function, but wrongly introduces
a new global variable.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Variable $itype is used an all C4/Ris.pm to switch
between marc falvors, but is local and not passed along
as argument.
As a quick solution, is defined as global
To test:
1) On UNIMARC setup, export a record as RIS,
check that author (and other fields) are displayed
incorrectly
2) Apply the patch
3) Export again, improved results
4) Run t/Ris.t
There are other problems in this script, needs maintenance
(e.g. no Modern::Perl friendly)
Signed-off-by: Victor do Rosário <jvr@fct.unl.pt>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This bug is dealing with the situation where an item is checked out to a
patron that is not the next in line hold-wise for an item. In this case,
Koha will warn the librarian that there are holds on the item and
show the first person in line. Again, I want to stress that this
is the case where the item *is not waiting* for a patron. The
hold for the patron listed will just have a priority of 1.
The only situation where the "Cancel hold" checkbox will function
is when the priority 1 hold is an item level hold. This is due to
the fact that CancelReserve is being passed the trio of
biblionumber, borrowernumber, and itemnumber rather than the
singular reserve_id.
1) place biblio level hold on a book to borrower A.
2) check out an item of the book to borrower B.
3) When confirming checkout, check the 'Cancel hold' check-box, and
click the "Yes, check out" button.
4) Note the hold was not canceled
5) Apply this patch
6) Repeat steps 1 through 3
7) Note the hold was indeed canceled
Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
The permanent_location is correctly filled when an item is added from
the cataloguing module (routine set_item_default_location from
cataloguing/additem.pl).
But when records are imported, this filled is not managed. It's only on
editing (_do_column_fixes_for_mod called from ModItem).
This patch set the permanent_location item fields to the location value for all
items created, even the imported ones.
Test plan:
0/ Do not apply this patch
1/ Import a record with items using the "Stage MARC for import" tool
2/ Check the values for the permanent_location in the items table.
They are set to NULL
3/ Apply this patch
4/ Repeat 2 and confirm that now the permanent_location values are set
to the location values.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
There are at least 2 wrong behaviors if the AnonymousPatron pref is not
defined (0 or empty string).
1/ If you use the clean borrower tools, you will get a successful
message when the nothing happened (the history has not been anonymised).
2/ At the OPAC, if a patron ask for delete his reading history, he will
get an error message "The deletion of your reading history failed,
because there is a problem with the configuration of this feature.
Please help to fix the system by informing your libr ary of this
error". IMO this should not happen, the history should be anonymised.
With this patch, the old_issues.borrowernumber field will be set to NULL
if the AnonymousPatron pref if not defined.
Test plan:
1/ Fill the pref with "" or 0
2/ At the OPAC, go on the privacy tab and click on the "Immedia deletion" button.
You should get a green and friendly message. Confirm that the history
has been anonymised.
3/ Use the "Batch patron anonymization" tools (tools/cleanborrowers.pl)
to anonymize the checkout history.
Confirm that a) it works and b) you get a message.
Try again with AnonymousPatron set to a valid patron. You should not see
any changes with the current behaviors.
NOTE: This patch tweaks C4/Circulation.pm and provides tests.
applying just this, and running prove success. Reverting just
C4/Circulation.pm fails, as expected.
Tested OPAC stuff with both patches applied.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
For some needs, a librarian would like to display a datetime or
timestamp field without the time.
This patch adds filter logic in the notice/letter parsing process.
Test plan:
1/ Defined a notice using a datetime or timestamp DB field
(biblio.timestamp for instance).
2/ Generate the notice
3/ Verify that the letter is generated with the time
4/ Use the "dateonly" filter like:
<<your_table.your_field | dateonly>>
<<biblio.timestamp | dateonly>>
5/ Generate the notice
6/ Confirm the the letter is generated without the time for this field.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Updated the count of tests to 64 for t/db_dependent/Letters.t to pass
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Same as previous patch for 3 other tables.
Test plan:
Same as before but the hold should exist to the 3 tables before the
move.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
If an item is moved from a biblio to another, the holds should be
updated too.
See discussion on the bug report for more information.
Test plan:
1/ Place a item-level hold on biblio1
2/ Move the item to biblio2
3/ Confirm that the hold still exists and point to the biblio2
This patch should not change the existing behavior for bib-level holds.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch makes it possible to search for users using the username (userid / login name).
To test:
- Apply patch
- Do searches from Home > Patrons
- Search after a full username or parts of a username with Search fields = Standard and Search fields = Userid
- Perform the searches from the top bar (expand with [+]) and from the "Filters" part at the left
- Make sure that other searches behave as before
Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
The problem making some tests fail, actually was the unneeded addition
of zero accountline records by ChargeReserveFee, called by AddReserve.
The balance is still zero, but a test like !$var responds differently
when var is 0.00 instead of 0 or undef.
This patch adjusts the test in ChargeReserveFee in order to prevent
adding these records with 0.00.
The first patch that adjusts the tests in Reserves.t is not strictly
needed anymore, but can stay.
Test plan:
[1] Run t/db_dependent/Reserves.t
[2] Run t/db_dependent/Reserves/GetReserveFee.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Fixed a missing space after Error: :)
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
TEST PLAN
---------
1) Apply all patches before this.
2) run koha qa test tools
-- whitespace failures
3) Apply this patch
4) run koha qa test tools
-- no whitespace failures.
NOTE: More tabs were fixed than required, to also clean up a little indenting.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Koha-qa tools now happy
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
TEST PLAN
---------
1) Apply patches, except this one.
2) prove t/db_dependent/Record.t
-- fails like comment #38
3) Apply this patch
4) prove t/db_dependent/Record.t
-- now it passes.
5) koha qa test tools.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Make test work, koha-qa problems fixed in next patch
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Some libraries would like to be able to add arbitrary fields to both the
RIS and BibTeX citation formats that a record can be saved as from the
staff intranet and public catalog. In addition, they would like to be
able to override the default record type and use Koha's itemtype as the
record type for those formats as well.
Test Plan:
1) Apply this patch
2) Run updatedatabase.pl
3) Add the following to the new syspref RisExportAdditionalFields:
TY: 942$c
LC: 010$a
NT: [501$a, 505$g]
4) Find or create a record with an 010$a (lccn) field, a 501$a field,
a 942$c field, and multiple 505$g fields.
5) Locate the record in the catalog, choose "Save" and select RIS
6) Inspect the downloaded file, note the replaced TY field, the LC
field, and multiple NT fields
7) Add the following to the new syspref BibtexExportAdditionalFields:
'@': 942$c
lccn: 010$a
notes: [501$a, 505$g]
9) Using the previously selected record, choose "Save" and select BIBTEX
10) Inspect the downloaded file, note the lccn, the multiple note
fields, and the new record type value
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
I have been working with messaging preferences and I noticed a weird issue in Firefox on Ubuntu.
On messaging preferences page, the table is unsorted and the content in rows are generated randomly
on every page refresh. When you select/deselect checkboxes and refresh the page (without posting the changes),
Firefox will remember your choices. Now the issue is that when the table is unsorted and the rows keep
changing on page refresh, Firefox has trouble remembering your choices. This makes it appear as if the
checkboxes are magically changing values on each page refresh.
Here is a patch that prevents this problem by sorting the messaging settings.
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
At the opac, the renew checkbox should not be displayed if it's an
on-site checkout (same on the intranet).
On the way, this patch adds a specific message to the intranet if the
librarian try to renew an on-site checkout.
Indeed before this patch a renew was allowed if the barcode was scanned.
Test plan:
1/ Create an on-site checkout for a patron
2/ Confirm that the checkbox 'renew' is not displayed on the checkout
list tables
3/ At the OPAC, the renew should not be allowed (no checkbox)
4/ Try to check the item out to the same patron, confirm that you get a
specifig message to inform you the renew is not allowed for on-site
checkouts.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Changed 'issue' to 'item' in the error message.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The names are much better now :)
Combined the queries for items and issues.
Only check the number of holds when needed.
Test plan:
Verify the changes here by running the unit test again.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The code of GetReserveFee was not very clear.
What it did was: check if there are some items not issued. If so and there
are no holds, calculate no fee.
While doing so, I moved the code to charge the fee (in AddReserve) to a small
new sub ChargeReserveFee.
There is no change in behavior.
The follow-up patch adds unit tests.
Test plan:
[1] Make sure that a patron category (X) includes a hold fee.
[2] Select a biblio with 2 items.
[3] Issue one item to another patron.
[4] Place a hold on this biblio by patron with category X. No charge?
[5] Cancel the hold from the previous step.
[6] Use another patron to place another hold on this biblio.
[7] Place hold again by patron with category X. Is it charged?
[8] Cancel that hold again. Issue the second item to another patron.
[9] Place hold again by patron with category X. Is it charged again?
Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch implements the copy and replace action for the marc
modification templates.
Instead of copying a field/subfield, it will erase the destination
fields/subfields.
Test plan:
Find it yourself.
Compare the differences between the copy and the copy_and_replace
actions.
The easier way to test is to 1/ create a complete record, 2/create some
modification templates and 3/ use the batch record modification with the
"preview" function.
QA note: I kept the same tests as "copy" and, if no change were
expected, I noted them "(same as copy)", to be sure this new action won't
introduce regression on these tests.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test
1/ Import a patron using the patron import tool, make sure they have
no debarred column in the file
2/ Check the database, notice the debarred column is 0000-00-00
3/ For bonus points, checkout an item to that borrower, then check it in
notice Koha errors
4/ Apply patch
5/ Import a new patron
6/ Notice column is now NULL and that checkins work
Signed-off-by: Eugene Espinoza <eugenegf@yahoo.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
When AutoBarcode is activated and you have set AcqCreateItem to 'on
order' there is a Javascript error when you try to generate a barcode
for the item:
TypeError: document.f is undefined
http://localhost:8080/intranet-tmpl/lib/jquery/jquery.js
Line 11
Test plan:
0/ a. Set AutoBarcode to hbyymmincr
b. Set AcqCreateItem to 'on ordering'
c. Set the plugin barcode.pl to the barcode field for the default
and the ACQ frameworks
1/ Go on the add items page (cataloguing/additem.pl) and confirm that
the plugin works as expected.
2/ Go on the New order page (acqui/neworderempty.pl) and confirm that
the plugin works as expected.
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
At checkout a hold for the same borrower is considered to be filled.
It is consistent to do the same for holds of the same borrower within
[ConfirmFutureHolds] days (if non-zero).
This goal is achieved by adjusting the CheckReserves call within
MoveReserve, adding the lookahead parameter.
I used this occasion to revisit other calls of CheckReserves:
- transferbook: no need to add lookahead; a future hold should not block
a transfer;
- CanBookBeIssued: no lookahead; future hold does not block an issue;
- CanBookBeRenewed: idem.
- GetOtherReserves (only used in circ/returns): this call might be a
candidate for lookahead too, but I leave that for another report. It is
in the context of checkin and transfer, not checkout.
Test plan:
[1] Set ConfirmFutureHolds to zero days. (You may also need to enable
AllowHoldDateInFuture.)
[2] Place a hold with borrower A on biblio X for tomorrow. Also place a hold
with borrower B on X for today. (Use biblio level holds.)
[3] Check out item Y of X to borrower A. Ignore the warning for borrower B
and do not cancel the hold of B (so: confirm checkout).
Verify that X has still two holds.
[4] Check in Y (without confirming a hold).
[5] Enable ConfirmFutureHolds, say 2 days.
[6] Check out Y to A again. Ignore the warning for B (no cancel). Verify that
X now only has one hold for borrower B (the hold for A was filled).
Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Currently it's not possible to include information about which
issue has arrived in the serial notification notice the patron
can subscribe to from the OPAC.
The patch makes the fields from the subscription and serial
table available to the notice template.
In order to be able to print information about the correct
issue, the GetAlert has been modified to expext the serialid
as externalid when the module is issue.
git grep SendAlerts (only call with 'issue' is in Serial.pm)
To test:
- Add a subscription, select a patron notification template
- Search for the record in the OPAC
- Go to the subscription tab - More details
- Subscribe to the notification
- Edit the notice template you selected for the subscription
- add fields from subscription
- add fields from serial (serial.serialseq has the issue
information)
- Receive an issue for the subscription
- Check that you have received the notification and that
all information has been printed correctly
NOTE: notice is sent directly, not through the message_queue
Followed test plan, works as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The special regex chars are not escaped in C4::HTML5Media.
Test plan:
1/ Set 856$u=http://www.mrqe.com/lookup?talented+mr.+ripley
2/ Enable the pref HTML5Media
3/ Go on the detail page
It should not explode.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Joonas Kylmälä <j.kylmala@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The ind_tag of TransformHtmlToXml is unused.
Some calls to this function incorrectly revert indicator and ind_tag (which
is not a problem when both are empty..)
Patch of Srdjan Jankovic, amended and signed off by Marcel de Rooy.
The following calls are fixed:
call in acqui/addorder.pl: switched indicator with ind_tag
call in acqui/addorderiso2709.pl replaced too
acqui/finishreceive.pl replaced too
These calls are fine:
two calls in cataloguing/additem.pl are fine
call in serials/serials-edit.pl is fine
call in tools/batchMod.pl is fine
The folllow-up patch adds a simple unit test.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
With AcqCreateItem=='placing an order', tested if adding an order still
worked (covered both addorder.pl and addorderiso2709.pl).
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
AllowRenewalIfOtherItemsAvailable checks
C4::Reserves::IsAvailableForItemLevelRequest to see if the item is
holdable, which catches not for loan values less than 0 ( i.e. holdable,
but not circ-able ). However, since this feature is about
actually checking out items to patrons, we should not count *any* not
for loan items when deciding if the available items will satisfy all
current holds.
Test Plan:
1) Enable AllowRenewalIfOtherItemsAvailable
2) Create a record with two items
3) Check out one item to a patron
4) Ensure the item is renewable
5) Place a hold on the record
6) The item should now be non-renewable
7) Add a second item to the record, but with a not for loan value < 0
8) Note the checkout is still renewable
9) Apply this patch
10) Note the checkout is now non-renewable
Works ok.
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
By default this syspref is "Do" to keep the previous behaviour.
Test plan :
1/ create 2 categories (A & B). B with enrolment fee
2/ create a patron in category A
3/ change the patron category from A to B
4/ check that the patron has an enrolment fee to pay
Apply the patch
1/ create a new patron in category A
2/ change the patron category from A to B.
3/ check that the patron has an enrolment fee to pay
4/ change the system preference 'FeeOnChangePatronCategory' to 'Don't';
5/ create a new patron in category A
6/ change the patron category from A to B
7/ check that the patron has no enrolment fee to pay
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Add a script sitemap.pl to process all biblio records from a Koha
instance and generate Sitemap files complying with this protocol as
described on http://sitemaps.org. The goal of this script is to be able
to provide to search engines direct access to biblio records. It avoid
leaving search engine browsing Koha OPAC and so generating a lot of
traffic, and workload, for a bad result.
Thanks Magnus for testing, and helping to improve the script design.
[2015.04.16] Switch from Moose to Moo.
[2015.08.20] Add complete (more) UT.
Signed-off-by: Magnus Enger <magnus@enger.priv.no>
All options to the script work as expected and the output looks
good. Nice enhancement!
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
I signed-of my own patch after fixing various QA errors.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended patch: replace tabs with spaces.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
The crux of the issue is that if you are using item level itemtypes, but
are allowing biblio levels holds, those holds do not have items.
So, in CanItemBeReserved, when Koha counts the number of holds to
compare against the given rule, it will always give 0 ( except of course
for found holds, and the occasional item-level hold ).
So the query is saying "link each of these reserves to the reserved
item, and count the number of reserves this patron where the itemtype is
DVD". However, since these are all record level reserves, there are no
items to link to, and so when it looks for all reserves this and item
whose itemtype is DVD, it finds zero reserves!
This patch solves the problem by looking first at the item level
itemtype, and if it does not exist, then it looks at the record
level itemtype. For installations using record level itemtypes, the
behavior remains unchanged.
Test plan:
1) Enable item level itemtypes
2) Create two records with one item each of a given itemtype
3) Create a single issuing rule and limit the holds allowed for that
itemtype to 1
4) Place a record level hold on your first record
5) Attempt to place a record level hold for the same patron on your
second record. You should not be able to but you can!
6) Apply this patch
7) Repeat step 5, note you can no longer place the hold!
Signed-off-by: Paola Rossi <paola.rossi@cineca.it>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
FAIL C4/Reserves.pm
FAIL pod
in file C4/Reserves.pm
*** ERROR:
Spurious =cut command
Test plan:
perl -e "use Pod::Checker;podchecker('C4/Reserves.pm');"
Should not return any errors.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In the staff client we had still some remains referring to the
constraint types.
Also touched one comment line from SIP.
Test plan:
Add a hold in the staff client.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Test Plan:
1) Apply this patch set
2) prove t/db_dependent/Circulation.t
3) prove t/db_dependent/Holds.t
4) prove t/db_dependent/Holds/LocalHoldsPriority.t
5) prove t/db_dependent/Holds/RevertWaitingStatus.t
6) prove t/db_dependent/HoldsQueue.t
7) prove t/db_dependent/Reserves.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
AMENDED: An else branch in reserve/placerequest.pl was removed. This had
the effect of making it no longer possible to place an any hold in the
staff client.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Verified placing a biblio level and an item level hold.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This followup adds several tests to t/db_dependent/Reserves.t.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Test plan:
1. Ensure that ExpireReservesMaxPickUpDelayCharge is set to 0.
2. Place a hold (doesn't matter whether it's a bib/item-level hold),
then confirm the hold by checking it in.
3. Check in the item again, and hit Cancel.
4. The reserve in question should be cancelled.
5. Repeat steps 2-4 twice, once after setting
ExpireReservesMaxPickUpDelayCharge to a nonzero value and again
after clicking the "Forgive fees for manually expired holds"
checkbox.
A fine should only be applied when the syspref is enabled and the
checkbox is not checked. Also, the checkbox should only appear after
enabling the syspref. And finally, the checkbox should remember whether
it is checked across multiple checkins, same as the "Forgive overdue
charges" and "Book drop mode" checkboxes.
Signed-off-by: Jason Burds <jburds@dubuque.lib.ia.us>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Amended patch: Removed 2 debugging lines.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch makes a tiny change in C4::Search::searchResults as to the
handling of not-for-loans. This should make the display of status and
availability of items more consistent in opac and staff.
Additionally, a Place hold link should disappear in the opac, when it is
not possible to place a hold on any item of one biblio.
The following spots need special attention; the display should be
corrected by this patch:
[A] Location column showing number of available items in catalogue/search.
[B] Location column of Cataloging Search (addbooks.pl)
[C] OPAC Search results list in non-XSLT view.
NOTE
The forms opac-MARCdetail and MARCdetail also include an Items table with
column Not for loan. The information in this column might still be somewhat
confusing but is actually correct. The column only contains Not for loan if
the item field is set. So it is empty when only the item type is nfl.
Since a correction here is arguable, I am not including it on this report.
Test plan:
[1] Have at least two item types. Mark one item type (X) as not for loan.
[2] Use at least two biblios with two items each. Mark one item of the first
biblio as not for loan at item level (via item editor).
Change one item of the second biblio to the item type of step 1 (X).
[3] Set pref item-level_itypes==item and set all four xslt prefs (for opac
and staff, results and detail) to default.
[4] Check spots A, B and C as mentioned above. Also check:
[D] OPAC Detail, Holdings table, Status column
[E] Staff Detail, Holdings, Status.
[5] Make all four xslt prefs now empty. Check spots A to E again.
Especially observe C here.
[6] Set pref item-level_itypes==biblio. Change your second biblio to item
type of step 1 (X) in the cataloguing editor (MARC 942c).
Check spots A to E again.
[7] Set all four xslt prefs again to default. Check spots A to E again.
[8] Run the unit test t/db_dependent/Search.t.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch fixes breakage introduced by the patch for bug 13506
that prevented SIP2 clients from authenticating themselves over
the telnet transport. Attempts to do so would manifest by the
SIPServer backend crashing and the connection getting closed.
To test:
[1] Use the stock SIPServer config, etc/SIPconfig.xml, and ensure
that the database contains a staff user whose username is 'term1'
and password is 'term1' that has the circulate permission.
[2] Start SIPServer, telnet to port 8023, and attempt to log in. The
connection will be aborted:
$ telnet localhost 8023
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
login: term1
password: term1
Connection closed by foreign host.
[3] Apply the patch and restart SIPSever, then repeat step 2. This time,
the login should succeed:
$ telnet localhost 8023
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
login: term1
password: term1
Login OK. Initiating SIP
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Colin Campbell <colin.campbell@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
makepartialpayment() wasn't logging the branch either. This patch
fixes that too.
To test:
- Run (with the regression tests applied)
$ prove t/db_dependent/Accounts.t
=> FAIL: tests fail because makepartialpayment is not logging the branch code
- Apply the patch
- Run
$ prove t/db_dependent/Accounts.t
=> SUCCESS: tests pass
- Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch fixes makepayment() so it correctly logs the branch code
to the statistics table.
To test:
- Run (with the regression tests applied)
$ prove t/db_dependent/Accounts.t
=> FAIL: makepayment() tests fail because logging is wrong
- Apply the patch
- Run
$ prove t/db_dependent/Accounts.t
=> SUCCESS: tests for makepayment now pass
(Note: makepartialpayment tests still fail as they need the next patch)
Original commit message relying on the UI to test:
There are several ways of paying fines, not all of them
recorded the branch the payment was made at correctly:
1) Pay button next to an individual fine
2) Checkbox + pay amount
3) Checkbox + pay selected
For each of those, check if the payment registered in
the table statistics contains the branchcode before
and after the patch.
The patch should fix 1).
2) and 3) are ok with and without the patch.
Important: Don't change the amount, pay individual fines.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Note: i fixed the commit message, because this is a fix for makepayment
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch does:
[1] Some trivial template changes. Modified some comments (POD lines).
[2] Converted plugin to new style.
[3] Table updates: renames id to hashvalue, adds a autoincrement id,
adds filesize, timestamp, owner and category.
RM: This db rev is in a separate sql file in atomicupdate.
[4] Code references to computed hash renamed to hashvalue instead of id.
[5] Removed some code pertaining to exposing upload dir structure. The user
now may choose a category; the uploader takes care of storage.
The list of upload categories is now taken from authorised values; this
might become a separate table in the future. (If there are none,
the upload process creates one default fallback.)
We can add e.g. permissions later, subdir structure, etc. (So dir will
not necessarily be category anymore.)
Test plan:
[1] Run the db revision.
[2] Upload new file. Check the record in the table. Delete it again; check.
[3] Run t/db../UploadedFiles.t.
[4] Run t/db../FrameworkPlugins.t -incl cataloguing/value_builder/upload.pl
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Adds httpheaders sub to UploadedFiles; this will be extended on a new
report. (Idea is to add configurable headers for file extensions.)
Trivial unit test added.
Small cosmetic changes to opac-retrieve-file.
Test plan:
Run test UploadedFiles.t
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch corrects the inability to upload the same file to a
different directory, or even a renamed file to the same
directory. By including the filename and directory as part of
the $id SHA generation, only identical files in the same
directory with the same file name will generate the same $id.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This updates the license text for
- C4/UploadedFiles.pm
- cataloguing/value_builder/upload.pl
- opac/opac-retrieve-file.pl
to GPL v3 as per the
http://wiki.koha-community.org/wiki/Coding_Guidelines#Licence
text.
TEST PLAN
---------
1) Don't apply this patch as part of 6874.
2) Run the koha qa test tool.
-- It will FAIL for those three file.
3) Apply this patch
4) Run the koha qa test tool.
-- License problem is corrected, no FAILs.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Two problems were discovered while doing a fresh install
of Koha. These problems in the kohastructure.sql file are
addressed with this patch.
Clicking the plug-in icon should cause the popup window
to refocus. This adds the refocus code to the upload.pl file.
The path to the jquery.js script was wrong in the
upload_delete_file.tt file. Changed [% themelang %] to
[% interface %].
If a user clones 856$u after uploading a file, deletes the file,
and then clicks the plugin icon on the first 856$u, this will go
immediately to the upload screen with an informative error
message.
After some validation was added, it was extended to include
other cases. This serves to patch 6874 to a state where sign
off should be possible.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
* Renames uploadPath to upload_path to follow the standard naming
conventions in koha-conf which use underscores rather than camel case
* Remove reference to intranet-tmpl and replace with [% interface %]
required to pass qa
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Add unit tests for C4::UploadedFiles and move a variable
declaration at subroutine level instead of file level.
Add dependency to Test::CGI::Multipart
Still works, and the newly-provided unit tests have good test
coverage:
C4/UploadedFiles.pm 90.7 65.0 66.7 100.0 100.0 0.2 86.4
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Squash of the following commits:
return with explicit undef removed
Follow-up for PBP fixes
follow-up fix POD syntax
follow-up jquery has moved
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Amended: removed POD changes in Biblio.pm while rebasing.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
New cataloging plugin upload.pl and new system preference 'uploadPath'.
upload.pl provide a way to upload files on the server and store a link
(url) to it in MARC
uploadPath is the absolute path on the server where the files will be
stored. It's possible to have a hierarchy of directories under this path
and the plugin will allow to choose in which directory to store the
file.
Stored value in MARC subfield looks like this:
<OPACBaseURL>/cgi-bin/koha/opac-retrieve-file.pl?id=<SHA-1 of the file>
So both 'uploadPath' and 'OPACBaseURL' sysprefs have to be set for this
plugin to work correctly
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Jared Camins-Esakov <jcamins@cpbibliography.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Slightly amended/simplified the patch during QA: The changes to
GetMarcUrls are not really needed, and would have needed some
attention. Another link text can be supplied by the plugin too.
This also reduces the need for changes in basket.pl,
MARCdetail.pl, detail.pl, opac-basket.pl and opac-detail.pl.
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Edit: more meaninfull commit subject
It would be incredibly helpful if we could easily enable Koha to dump
all Template Toolkit variables to a comment for debugging purposes.
Test Plan:
1) Apply this patch
2) Run updatedatabase
3) Enable the new system preferences DumpTemplateVarsIntranet and
DumpTemplateVarsOpac
4) Load a page in the staff intranet, view the html source
5) Note the template toolkit variables are embedded in an html comment
6) Load a page in the opac, view the html source
7) Note the template toolkit variable are embedded in an html comment
NOTE: I had to cpan2deb Template::Plugin::Stash to test.
This is not optimal. Additionally:
http://www.template-toolkit.org/docs/modules/Template/Plugin/index.html
does not contain Stash. I suspect this was how it was
introduced initially by TT.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
This patch moves the core code of two selfreg cron jobs into the Members
module. The new routines are called from cleanup_database with two new
parameters. The old cron jobs are now wrappers to cleanup_database.
As a bonus, we can add a unit test now.
In time, we can obsolete the selfreg cron jobs. For now, the code is in one
place and behavior does not change.
A next step (as described on the Bugzilla report) would be: remove the Delay
pref for self regs.
Test plan:
Run the unit test t/db_dependent/Members.t.
Test the two new parameters of cleanup_database.pl.
Verify if delete_expired_opac_registrations.pl still works.
Same for delete_unverified_opac_registrations.pl.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
. Fixed minor merge confict on UT & cleanup_database.pl
. UT ok
. The two deprecated scripts still work as before, with a warning
message.
. cleanup_database.pl do the deletion job, calling new C4::Members
function rather that doing it directly.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
