This patch moves the code of the C4::Members::AddEnrolmentFeeIfNeeded
subroutine to the Koha::Patron->add_enrolment_fee_if_needed method.
The behavior should be unchanged.
Test plan:
1/ Define enrolment fee for 2 patron categories
2/ Create a patron using the first category
=> The patron should be charged
3/ Change the patron category to the other one
=> The patron should be charged again
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This line has been added by bug 16917 to define the default value of
borrowers.checkprevcheckout.
As this value is defined in the DBIx::Class schema, we should not have
to handle it here.
Test plan:
Confirm that this patch does not reintroduced the bug fixed by bug
16917.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
These calls have been added from commit e196f19 (Bug 12633: Remove SQLHelper
in C4::Members) which added a TODO:
"This patch replaced the calls to SQLHelper to use DBIX::Class.
TODO: Move them to Koha::Borrower."
This is now done by this patch: instead of calling DBIx::Class directly
we use Koha::Patron
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This job should be done each time patron data are deleted. It's better
to do it just before deleting the patron than assuming the caller did
the job by itself.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch moves the C4::Members::DelMember subroutine to the
Koha::Patron module.
The delete method must be overwritten to permit handling of patron's
holds.
Test plan:
(With the 2 patches applied)
1/ Create a patron with holds and owner of lists
2/ Delete patrons using the web interface:
- More > Delete on a patron page
- Batch patron deletion tools
3/ and the cronjob script
- perl misc/cronjobs/delete_patrons.pl -c [more options]
The patron should have been moved to the deletedborrowers table, his/her
holds and lists should have been deleted.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch removes the C4::Members::MoveMemberToDeleted subroutine in
order to replace it with the Koha::Patron->move_to_deleted method.
Next after this change, we will move C4::Members::HandleDelBorrower and
C4::Members::DelMember to the same module to simplify the code in
members/deletemem.pl and misc/cronjobs/delete_patrons.pl
Test plan:
1/ Delete a patron from the staff interface and make sure (s)he has been moved to
the deletedborrowers table.
2/ Use the "Batch patron deletion" tool (tools/cleanborrowers.pl) to
remove patron. Make sure the "Permanently delete these patrons" and "Move
these patrons to the trash" options work as before
3/ Same as previously but using the cronjob
misc/cronjobs/delete_patrons.pl.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Tested the delete_patrons.pl script and cleanborrowers.pl too.
Tests (are relevant and) pass and the qa scripts are happy too :-D
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
This subroutine is only called once and can be replaced with a call to
is_debarred and has_overdues.
Note that prior to this patch, IsMemberBlocked copy/paste code from
HasOverdues, which did not make sense.
Test plan:
Debar a patron and make sure he is not able to checkout (the librarian
is asked to overwrite if OverduesBlockCirc is set to 'confirmation')
Remove the debarment and add overdues to this patron, same as
previously, the checkout should be blocked
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Sponsored-by: BULAC - http://www.bulac.fr/
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
With small change: number of tests in t/db_dependent/Members.t
https://bugs.koha-community.org/show_bug.cgi?id=12276
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This subroutine was only used in one script and its job is the same as
GetAuthorisedValueByCode.
It's better to use the AuthorisedValues TT plugin to retrieve AV
descriptions.
Test plan:
Edit a patron with sort1 and/or sort2 defined.
On the patron details page (members/moremember.pl) you should see the
sort1 and/or sort2 info displayed.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch just move C4::Members::HasOverdues to
Koha::Patron->has_overdues and updated callers
Test plan:
No change in behavior is expected.
1/ If a patron is debarred and does not have overdues and
AutoRemoveOverduesRestrictions is on, the debarment will be removed on
checkin
2/ Add overdues and make sure the patron cannot renew
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch moves the code from C4::Members::ExtendMemberSubscriptionTo
to Koha::Patron->extend_subscription.
The expected behavior is:
When a new patron is created, the enrolment period defined for the
patron category is used unless an enrolment period date is defined. In
that case, this date is used.
When an account is renewed, the pref BorrowerRenewalPeriodBase is used to
determine if the subscription is renewed from today or from the day when his/her
account has expired.
Test plan:
Confirm that the behavior is correct before this patch and that it's
still the same after this patchset applied.
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch moves the code from C4::Members::GetExpiryDate to
Koha::Patron::Categories.
Nothing much exiting, please follow test plan in next patches.
Signed-off-by: Aleisha Amohia <aleishaamohia@hotmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This unnecessary complicated subroutine returned an arrayref and an
hashref of the patron categories available for the logged in user, for a given
category_type, ordered by categorycode.
This can now be done with the search_limited method.
Test plan:
- Same prerequisite as before
For the following pages, you should not see patron categories limited to other
libraries. They should be ordered as before this patch, by categorycode.
- Add/edit a patron, change his/her patron category value.
- On the 3 following reports:
reports/bor_issues_top.pl
reports/borrowers_out.pl
reports/cat_issues_top.pl
The display for these 3 reports are different than the 2 from the first
patch (borrowers_stats.pl issues_avg_stats.pl): they are ordered by
categorycode and the ones limited to other libraries are not displayed
(should certainly be fixed).
Note that the big part of this patch has already been tested before
(update child related: CATCODE_MULTI).
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
C4::Members::GetBorrowercategoryList returned all the patron categories,
ordered by description.
This can be done using the search method of the Koha::Patron::Categories
module.
Test plan:
- Same prerequisite as before
For the following pages, you should not see patron categories limited to other
libraries. They should be ordered as before this patch, by description.
- On the "patron attribute types" admin page (admin/patron-attr-types.pl).
- On the "Batch patron deletion/anonymization"
(tools/cleanborrowers.pl), the dropdown list should be filled
correctly.
- On the import patron tool
- On the following report:
reports/reserves_stats.pl
Confirm that the patron categories are displayed and that the report
still works as before.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The purpose of C4::Members::GetBorrowercategory was to return the patron
category for a given categorycode. This can be done easily with the
Koha::Patron::Categories->find method.
Test plan:
- Same prerequisite as before
- Edit a guarantor and confirm the information will be updated for his/her
guarantee(s).
- Update a child to adult patron (Note: Should not we hide the patron
categories limited to others libraries? If yes, it must be done on another
bug report).
There is a special behavior if there is only 1 adult category, the
user does not need to select a category. So the same as before with
only 1 adult patron category.
- Import a patron with a category_code which does not exist. You should
be warned.
- Modify some patron using the batch patron modification tool. The
patron category descriptions should correctly be displayed.
Note that the overduerules page has already been tested in a previous
patch.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This subroutine just reads the content of a pref, split it, add an
empty string and returns.
It is not really useful and the code in the script (memberentry.pl) uses
the only occurrence of CGI::popup_menu
Let's remove it and build the dropdown list in the template.
Test plan:
1/ Empty BorrowersTitles, edit a patron and confirm that the "Salutation"
does not appear
2/ Fill BorrowersTitles with "Mr|Mrs|Miss|Ms", edit a patron and confirm
that the "Salutation" dropdown list is correctly filled.
The default option should be selected if you are editing a patron with a
title defined.
This should also be tested at the OPAC.
Followed test pan, works as expected in Staff and OPAC
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This subroutine has been added by
commit 5904681fac
Date: Wed Mar 19 10:11:12 2008 -0500
CleanBorrowers fixing.
but has never been used.
It can be removed safely.
Test plan:
git grep GetBorrowersNamesAndLatestIssue
should not return any results.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
C4::Members::checkuniquemember was not really nicely written, was only
used once and was not covered by tests.
I think it does not make sense to keep such complexity and have this
code in the subroutine/method.
Looking at this patch it seems that what this subroutine did can be done
easily in the pl script in few lines.
Test plan:
1/ Create 2 organisations with the same "surname": you should get a
warning.
2/ Create 2 patrons (non-organisation) with the same
surname/firstname/date of birth, you should get a warning
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Test plan:
Import some patrons (tools/import_borrowers.pl) and make sure it imports
the patrons correctly.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch moves the code from C4::Members::changepassword to
Koha::Patron->update_password
Test plan:
Change your password at the OPAC and the staff interface
This should work as before
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
I rebased this on top of 16849 because they were conflicting.
Tests pass, code looks good (as usual) and I checked both OPAC
and staff password change work as expected.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
In order to move IsMemberBlocked to Koha::Patron it makes sense to move
the code from Koha::Patron::Debarments::IsDebarred to
Koha::Patron->is_debarred.
Test plan:
1/ Add a restriction to a patron
2/ make sure he is not able to checkout items any more
3/ Make sure he cannot get a discharge
4/ Put a hold and make sure you get "Patron has restrictions"
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 15656 removed the C4::Members::GetMemberRelatives subroutine but the
module still exports it.
Test plan:
git grep GetMemberRelatives
should not return any results.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This subroutine is no longer in used and can be removed safely
Test plan:
git grep ModPrivacy
should not return any occurrences.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Error:
DBIx::Class::Storage::DBI::_dbh_execute(): Column 'checkprevcheckout'
cannot be null at C4/Members.pm line 697
Test Plan:
1) Attempt to import a patron via csv
2) Note the error
3) Apply this patch
4) Repeat the import
5) No error!
NOTE: Given that all the other tests ran (comment #2), except
those in comment #3, I resorted to following the test plan
above using the attachment provided in comment #5. I
believe the issues in comment #3 constitute other bugs
which need fixing and are unrelated this bug. Applying the
patch does resolve the error triggered, and the code is
good.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch makes C4::Members::DelMember proprely use Koha::Holds to delete
holds. This is important as holds actions are started to be logged.
To reproduce:
- Apply the patch
- Run:
$ prove t/db_dependent/Members.t
=> SUCCESS: Tests pass
- Sign off :-D
Sponsored-by: NEKLS
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
All tests pass successfully
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Bug 15840 tried to fix a bug but makes things more complicated than it
was before.
If an userid is not provided for 1 or more rows of the csv file, it
should not be updated. However, if a userid is provided and it already
used by an other patron, the import should fail for this row (but not
crash!).
Test plan:
0/ Create a patron with a userid=your_userid
1/ Use the import patron tool to update this userid
=> userid should have been updated
2/ Update another data and do not provide the userid
=> data should have been updated and not the userid
3/ Update another data and provide the userid, but set it to an empty
string, or '0'
=> data should have been updated and not the userid
4/ Update another patron, and set userid=your_userid
=> Update should fail and an error whouls be displayed ("already used by
another patron")
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
This patch adds three parameters to the cron job: -before and -after, and
-branch.
You can run the cronjob now in an adjusted frequency: say once a week with
before 6 or after 6 (not both together). If your pref is set to 14, running
before=6 will include expiries from 8 days to 14 days ahead. When you
use after=6, you would include 14 days to 20 days ahead, etc.
You could also rerun the job of yesterday by setting before=1 and after=-1;
this could help in case of problem recovery.
Obviously, the branch parameter can be used as a filter.
NOTE: Why are these parameters passed only via the command line?
Well, obviously the branch parameter is not suitable for a pref.
The before/after parameter allows you to handle expiry mails different from
the normal scheme or could be used in some sort of recovery. In those cases
it will be more practical to use a command line parameter than editing a
pref.
NOTE: The unit test has been adjusted for the above reasons, but I also
added some lines to let existing expires not interfere with the added
borrowers by an additional count and using the branchcode parameter.
Test plan:
[1] Run the adjusted unit test GetUpcomingMembershipExpires.t
[2] Set the expiry date for patron A to now+16 (with pref 14).
Set the expiry date for patron B to now+11.
[3] Run the cronjob without range. You should not see A and B.
[4] Run the cronjob with before 3. You should see patron B.
[5] Run the cronjob with before 3 and after 2. You should see A and B.
[6] Repeat step 5 with a branchcode that does not exist. No patrons.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described following test plan.
Test pass
No errors
New parameters work with one (-) or two(--) dashes, no problem
with that but convention suggest that 'long' options use two-dashes.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This enhancment allows a library to prevent patrons from checking out
items if his or her guarantees own too much.
Test Plan:
1) Apply this patch
2) Find or create a patron with a guarantor
3) Add a fine to the patron's account
4) Set the new system preference NoIssuesChargeGuarantees to be less
than the amount owed by the patron
4) Attempt to check out an item to the guarantor, you will either
be warned or prevented from checking out based on your system
settings.
Signed-off-by: Cathi Wiggin <CWIGGINS@arcadiaca.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Rename not_borrowered_since to not_borrowed_since
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
This patch adds the ability to select a patron list for deletetion
when using the Batch patron deletion/anonymization tool. It also adds
buttons to the the patron lists table to access both the batch deletion
and batch modification directly from the lists view.
This is a squash of previous patches but now adds a patron_list_id
parameter to C4::Members::GetBorrowersToExpunge and uses that routine to
fetch patrons from a list.
Test Plan:
1) Apply this patch
2) Create a list of patrons with the new Patron Lists feature
3) Try using the batch edit link form the lists table
4) Try using the batch delete link from the lists table
5) Verify previous functionality has not changed
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Patron batches are correctly passed to the edit and delete pages.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
perl -p -i -e 's/^.*set the version for version checking.*\n//' **/*.pm
+ manual adjustements
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Mainly a
perl -p -i -e 's/^.*3.07.00.049.*\n//' **/*.pm
Then some adjustements
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
C4::Members::GetMemberAccountRecords wrongly casts float to integer
It's common to use sprintf in Perl to do this job.
% perl -e 'print int(1000*64.60)."\n"';
64599
% perl -e 'print sprintf("%.0f", 1000*64.60)."\n"';
64600
Test plan:
1) Create manual invoice for 64.60 (or 1.14, 1.36, ...)
2) Try to pay it using "Pay amount" or "Pay selected" buttons
Signed-off-by: Sally Healey <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Note:
QA question: Does the Koha::Patron->siblings method should return undef
if there is no guarantor?
It would avoid the weird != undef, = $borrowernumber conditions.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
2 subroutines of C4::Members deal with guarantor/guarantees:
GetGuarantees and GetMemberRelatives.
Since we already have a Koha::Patron->guarantor method, it makes sense
to move these 2 subroutines to this module.
This first patch deals with GetGuarantees.
Test plan for the entire patch set:
1/ Create 5 patrons A (adult), B (child), C (child), D (child), E
(child), F (adult)
2/ Add relation between them: A is father of B, C and D.
E does not have a guarantor
F does not have guarantees
3/ Check some items out for all of these patrons
4/ On the "Check out" and "Details" tabs, you should not see any
differences with these patch applied : The "Relatives' checkouts" tabs
should list all of the guarantor/guarantee/siblings checkouts
Note:
$template->param('C' => 1);
I have not found any reference of this 'C' in the template.
It seems it's an old c/p from members/memberentrygen.tt
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Looking at the code, there is some broken with the guarantees code.
It seems that the expected behavior would be to update address, fax,
B_city, mobile, city and phone info of the guarantees when a guarantor
is modified.
But the code in C4::Members::ModMember is broken:
668 my $borrowercategory= GetBorrowercategory(
$data{'category_type'} );
669 if ( exists $borrowercategory->{'category_type'} &&
$borrowercategory->{'category_type'} eq ('A' || 'S') ) {
670 # is adult check guarantees;
671 UpdateGuarantees(%data);
672 }
First, GetBorrowerCategory expects a categorycode, not a category_type.
Then UpdateGuarantees retrieves the param like:
989 sub UpdateGuarantees {
990 my %data = shift;
Which means that %data will always be something like ( a_key => undef )
And nothing more.
The updateguarantees subroutine (It has been renamed) has been introduced by
commit 56825e415f
Date: Mon Aug 30 13:48:58 2004 +0000
modularizing (with Members.pm) members management
(beginning of...)
And the `%data = shift` already existed...
This code has never worked and could be removed.
See http://lists.koha-community.org/pipermail/koha-devel/2016-January/042241.html
Test plan:
Confirm the previous assertions.
Note that I have found this bug working on bug 15631, see patch "Bug
15631: Koha::Cities - remove getidcity and GetCities"
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch fixes a bug whereby GetMember(searchfield => undef)
(i.e., searching for patron records where 'searchfield' is NULL)
would crash.
This fixes a regression introduced by bug 15344 that in turn
exposed a long-standing bug in GetMember().
To test:
[1] Import some offline circulation transactions that include at
least one return.
[2] Attempt to view the list of pending transactions; a crash
will occur.
[3] Apply the patch and view the list of pending transactions again;
this time, it should work.
Signed-off-by: Galen Charlton <gmcharlt@gmail.com>
Signed-off-by: Srdjan <srdjan@catalyst.net.nz>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
To retrieve a patron image, we can call Koha::Patron::Images->find or
Koha::Patrons->find->image
Both will return a Koha::Patron::Image object.
Test plan:
1/ From the patron/member module, open all tabs on the left (Checkouts,
detail, fines, etc.)
The image should be correctly displayed.
2/ At the OPAC, on the patron details page (opac-memberentry.pl) the
image should be displayed as well.
3/ Same on the sco module.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The C4::Members::RmPatronImage just removed a row in patronimage.
This can be accomplished using the delete method of Koha::Patron::Image.
Test plan:
From the patron defail page, try to delete the image of a patron.
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The C4::Members::PutPatronImage inserted/updated the image of a patron.
This can be done easily with ->find->set->store or ->new->store
Test plan:
1/ Modify the image of a patron from the patron detail page
2/ Add an image to a new patron
3/ Use the "Upload patron images" tools (tools/picture-upload.pl) to add
or modify the image of a patron
4/ Use the "Upload patron images" tools (tools/picture-upload.pl) to add
or modify the image of several patrons, using a zip file.
Stress the script trying to get as many errors as possible (wrong
cardnumber, wrong mimetype, file does not exist, etc.)
With this patch, if the cardnumber does not exist, you will get a
specific error "Image not imported because this patron does not exist in
the database"
Signed-off-by: Josef Moravec <josef.moravec@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
The 'borrower' should not be used anymore, especially for new code.
This patch move files and rename variables newly pushed (i.e. in the Koha
namespace).
Test plan:
1/
git grep Koha::Borrower
should not return code in use.
2/
Prove the different modified test files
3/ Do some clicks in the member^Wpatron module to be sure there is not
an obvious error.
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as described. Tested with Circulation, Members/Patrons, Discharge,
Restrictions modules and the must common functionalities
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
This subroutine just retrieved the messages given some parameters.
Some job should not have been done in this subroutine.
It was called only 3 times, in circ/circulation.pl and opac-user.pl.
Basically it was used to retrieved the message to displaye for a given
patron ($borrowernumber) at the OPAC (B) or Staff (L).
For the 3 calls, the 2 parameters $borrowernumber and $type
(message_type) were passed, the "%" trick at the beginning of the
subroutine was useless.
Moreover, the date formatting should be done on the TT side, not in
subroutine.
The can_delete flag was set if the branchcode given in parameter was the
same as the one of the message. This has been delegated to the template.
Indeed the can_delete was not valid, since it must depend on the
AllowAllMessageDeletion pref.
The test is now:
IF message.branchcode == branch OR
Koha.Preference('AllowAllMessageDeletion'')
There is not specific test plan for this patch, the changes have already
been tested in previous patches.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The GetMessageCount subroutine was only used once, in opac-user.pl, to
know if some messages will be displayed.
Test plan:
1/ Create messages to display at the OPAC for a patron
2/ Logged this patron in at the OPAC, you should see the messages
displayed.
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The DeleteMessage just deleted and logged if needed.
This is now be done by Koha::Patron::Message->delete.
Test plan:
1/ Go on the "check out" page of a patron
2/ Delete some messages
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
The AddMessage subroutine just
1. checked if all the parameters were passed
2. inserted the message in the DB
3. logged the action if needed
These 3 jobs are now done by the overloaded store method of
Koha::Patron::Message.
Test plan:
1/ Go on the "check out" page of a patron
2/ Add different new messages
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Brendan A Gallagher <brendan@bywatersolutions.com>
Test plan:
1. Open OPAC self-registration page while logged out.
2. Note that cardnumber and categorycode are not shown.
3. Remove cardnumber and categorycode from
PatronSelfRegistrationBorrowerUnwantedField.
4. Enable autoMemberNum.
5. Reload self-registration page, note that categorycode now shows.
6. Disable autoMemberNum.
7. Reload self-registration page, note that cardnumber now shows.
8. Try saving a patron with an existing cardnumber; this should fail
and explain why.
9. Set CardnumberLength, and verify that those length restrictions are
enforced.
10. Verify that patron can be created with custom categorycode and
cardnumber.
Signed-off-by: Michael Sauers <msauers@dospace.org>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
When importing patrons with a csv file which does not contain the privacy_guarantor_checkouts column in the header, you will get
DBIx::Class::Storage::DBI::_dbh_execute(): Column 'privacy_guarantor_checkouts' cannot be null at /home/koha/src/C4/Members.pm line 768
The same issue seems to occur for sms_provider_id.
Test Plan:
1) Attempt to import patron csv file with no privacy_guarantor_checkouts column
2) Note the error
3) Apply this patch
4) Repeat step 1
5) The error should no longer occur
NOTE: While this patch does work, should it be solved only
at this level? The issue that there is the lack of those two
fields on the tools screen still exists.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
This patch allows patrons to create thier own password during OPAC self
registration. It sets the password field to be hidden by default, and
allows for a system generated password if no password is supplied and
field is not mandatory
1 - Apply patch
2 - run updatedatabase.pl
3 - Check syspref "PatronSelfRegistrationBorrowerUnwantedField" - it
should contain 'password'
4 - Check self registration on opac - there should be no change
5 - Remove 'password' from PatronSelfRegistrationBorrowerUnwantedField
6 - Password field should now be visible in OPAC self registration
7 - Register a patron: If no passwor is supplied you should get a system
generated password
8 - Register a patron with a password, your password should be used
9 - Add 'password' to PatronSelfRegistrationBorrowerMnadatoryField
10 - Attempt to register a patron with no password - it should fail
11 - Try all combinations if mismatched/short/missing passwords and view
correct error messages
12 - prove t/db_dependent/Members.t
Sponsored by : Do Space (www.dospace.org)
Signed-off-by: Jesse Weaver <jweaver@bywatersolutions.com>
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
C4::Members::getidcity and C4::Members::GetCities simply retrieved
cities info from the cities table.
The job done in members/memberentry.pl looked really weird and complicated.
Either I have missed something, or this patch can simplify it.
The expected behavior is:
1. Create a new patron => No city selected
2. Edit an existing patron => The borrowers.city value is selected
3. Add a guarantee => The borrowers.city of the guarantor is selected
4. Edit a guarantee => The borrowers.city of the guarantee is selected
Test plan:
Confirm that the expected behaviors are the ones before and after this patch.
Signed-off-by: Natasha <tasham_8@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
C4::Members::getzipnamecity was not used and can be remove safely.
Test plan:
git grep getzipnamecity
should not return any result.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
From the mailing list:
"I'm working on 3.22.02 and my logs are FILLED with the following warnings:
Members.pm: Unable to load Koha::NorwegianPatronDB at /blurred/C4/Members.pm line 46., referer: http://blurred/cgi-bin/koha/acqui/booksellers.pl
admin-home.pl: Unable to load Koha::NorwegianPatronDB at /blurred/C4/Members.pm line 46., referer: http://blurred/cgi-bin/koha/admin/preferences.pl"
I agree. Looking at C4/Members.pm other warns are all prepended with $debug.
TEST PLAN
---------
1) rm Koha/NorwegianPatronDB.pm
-- quickest and dirtiest way to get the load to fail.
2) echo > ~/koha-dev/var/log/koha-error_log
-- so it will be easy to spot the log changes.
-- back up the log file if you really want it.
3) log into the staff client and go to patrons.
-- Check the log file. "Unable to load ..." will be there.
4) echo > ~/koha-dev/var/log/koha-error_log
5) sudo vi /etc/apache2/sites-enabled/{your koha site file}
-- Find your staff client entry in your apache
configuration file and add:
SetEnv DEBUG 1
6) sudo service apache2 restart
7) apply the patch
8) refresh the patron page
-- "Unable to load..." will still be there.
9) change the DEBUG value in your apache config to 0
10) sudo sevice apache2 restart
11) echo > ~/koha-dev/var/log/koha-error_log
12) refresh the patron page
-- "Unable to load..." will NOT be there.
13) git checkout origin/master -- Koha/NorwegianPatronDB.pm
-- to bring it back.
14) refresh the patron page
-- "Unable to load..." will still not be there.
15) run koha qa test tools
Signed-off-by: Philippe Blouin <philippe.blouin@inlibro.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Brendan Gallagher brendan@bywatersolutions.com
Nearly all cellular providers allow a person to send an text message to a cellular
phone by sending an email to phonenumber@provider. We can leverage this capability
to add the ability for Koha to send sms messages to patrons without the need to
subscribe to an sms gateway server.
Basic plan:
1. Add a table sms_providers to the db to tell Koha what service providers are available, and what domain emails should be sent to.
2. Add borrowers.sms_provider_id to tell Koha which mobile service the patron subscribes to for the number given in smsalertnumber
3. Modify Koha to send an email rather than using SMS::Send if the driver is set to 'Email'
Test plan:
0) Get a mobile phone
1) Apply the patch
2) Run updatedatabase.pl
3) Set the value of SMSSendDriver to 'Email'
4) Go to the admin page, the "Additional parameters" area should now have the link "SMS cellular providers"
5) On this page, add some providers. Make sure to add the provider for your own cellular phone service.
Here are some examples:
Sprint phonenumber@messaging.sprintpcs.com
Verizon phonenumber@vtext.com
T-Mobile phonenumber@tmomail.net
AT&T phonenumber@txt.att.net
Only add the domain part in the 'domain' field. So for Verizon, that would be 'vtext.com'
6) Create an account for yourself, add your SMS number, and select your provider from the dropdown box directly below it.
7) Enable SMS messaging for Item check-in and Item checkout
8) Check out an item to yourself
9) Run process_message_queue.pl
10) Wait! You should receive a text message shortly, when I tested it, I received my sms message within the minute.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Same as previously.
For these files it's a bit less obvious.
To make sure these changes won't introduce any regression, check that
the variable returned by GetMember is never used to get something
else than a borrower fields.
The 'flags' should not be get neither.
For opac-user.tt it's different, other keys are got but there are defined
in the pl script.
On the way:
- 'showname' is removed (never used)
- fix scope var issue in opac-user.tt (BORROWER_INF.OPACPatronDetails vs
OPACPatronDetails)
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
This patch loads Koha::NorwegianPatronDB if it can, or adds a warning
to the log if it can't load it.
Since the Koha::NorwegianPatronDB functionality in C4::Members is
wrapped in system preferences, the loading of the module is
irrelevant unless one actually wants to use the module and its
associated functionality.
NOTE:
This patch fixes a problem where we were getting errors saying
Crypt::GCrypt couldn't be loaded even though it's not a required
dependency.
This patch will likely only affect people not using Debian-based
systems where libcrypt-gcrypt-perl is available. The current
version of Crypt::GCrypt doesn't build so it's not an option
for most non-Debian users to install this not required
dependency in order to work around this issue...
Signed-off-by: Hector Castro <hector.hecaxmmx@gmail.com>
Works as advertised for Debian-based systems
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch removes C4::Dates from following files in folder C4:
- C4/Members.pm
- C4/Reserves.pm
- C4/Search.pm
- C4/Utils/DataTables.pm
- C4/Utils/DataTables/Members.pm
- C4/VirtualShelves/Page.pm
To test:
-run tests as appropriate,
- have a close look at the code changes
- try to find regressions
http://bugs.koha-community.org/show_bug.cgi?id=14985
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Bug 14985: (followup) Remove eval if dates come from database
This patch removes some evals from date-formatting where the dates come
from the database.
See comments #7 - #9
Additionaly, C4/VirtualShelves/Page.pm is removed from the patches (obsolete).
Bug 14985: (followup) Remove C4::Dates from C4/Overdues.pm
Ths patch removes a stray C4::Dates from C4/Overdues.pm
- To test got to a patron who has overdues
(Home > Circulation > Checkouts > [Patron])
- Print overdues
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Sorts Patron's accounting data consistently from newest to oldest.
It doesn't depend on anymore to timestamp (which can be same for multiple
entries) from database but instead uses accountline's id to sort.
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
In order to avoid loading Koha::NorwegianPatronDB a DB query was
used. Instead, a require should be used. This causes non-db_dependent
tests that load C4::Members to fail.
To test:
- Shut mysql down
$ sudo service mysql stop
- Run the tests:
prove t/Circulation_barcodedecode.t
=> FAIL: DB connection is expected, tests fail
- Apply the patch
- Run the tests:
prove t/Circulation_barcodedecode.t
=> SUCCESS: Tests pass
- Sign off .-D
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Some librarians would like to be able to print an overdues slip from the
staff intranet. This slip would be defined as the print transport
version of the ODUE slip.
Test Plan:
1) Apply this patch
2) Locate a patron with overdues
3) Define a print version of the OVERDUES_SLIP slip
4) Try Print > Print overdues
Signed-off-by: Amy Purvis <APurvis@galencollege.edu>
Signed-off-by: Laurie McKee <lmckee@littleelm.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
- remove DateTime->now()
- use Koha::DateUtils->dt_from_string;
- use Pod2usage for the usage
- use Modern::Perl
- use branches table
- Change letter code from MEMEXP to MEMBERSHIP_EXPIRY
- review comments implemented
- fix qa script comments
Bug 6810 - Fix QA failures
- MembershipExpiryDaysNotice system preferences arragned alphabetical order.
Bug 6810 - Add sample notices
- review comments implemented
- default value of is_html field in letter table is 0
Signed-off-by: Alex Arnaud <alex.arnaud@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Bug 6810 - Fix QA failures
- Use KohaDates to convert dateexpiry
- remove MYSQL specifics methods for date handling in
GetUpcomingMembershipExpires
- make the script membership_expiry.pl write in Koha system logs
- add tests
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Bug 6810 - Fix QA failures:
- use Koha::DateUtils instead of Koha::Template::Plugin::KohaDates,
- Add test with syspref MembershipExpiryDaysNotice equals 0 and undef,
- fix (new) test failure (when MembershipExpiryDaysNotice is undef).
Signed-off-by: Indranil Das Gupta (L2C2 Technologies) <indradg@gmail.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
A new crontab based perl script to send membership expiry reminders. A
system preference controls the number of days in advance of membership
expiry that the notices will be sent on.
To Test:
1) Create a new Patron and set membership expiry date 14 days from the
date of registration.
2) Check your systemprefence ( MemExpDayNotice to 14 days default value)
3) Manual testing Run ( perl membership_expiry.pl -h)
It would give you various option:
This script prepares for membership expiry reminders to be sent to
patrons. It queues them in the message queue, which is processed by
the process_message_queue.pl cronjob.
See the comments in the script for directions on changing the script.
This script has the following parameters :
-c Confirm and remove this help & warning
-n send No mail. Instead, all mail messages are printed on screen.
Useful for testing purposes.
-v verbose
Do you wish to continue? (y/n)
4) Choose option for ex: perl membership_expiry.pl -c
5) Go to your koha database and check message_queue table you see some
results.
6) Run (perl process_message_queue.pl) it will send email to those
patron whose membership after 14 days from today.
7) Cron testing: (10 1 * * * $KOHA_CRON_PATH/membership_expiry.pl -c)
8) Set your 15 * * * * $KOHA_CRON_PATH/process_message_queue.pl
9) After running membership_expiry.pl, (process_message_queue.pl will
send emails to those patron whose membership after 14 days from
today).
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This is a(nother) vestige of Koha (2.2?).
This patch removes unused code related to the 'ethnicity'.
In detail:
There is no way to fill the ethnicity table.
There is no way to fill the borrowers.ethnicity and borrowers.ethnotes.
BUT if borrowers.ethnicity exists, the value is displayed on
members/moremember.pl (and only here).
Test plan:
Apply this patch and confirm there is no regression on
adding/updating/deleting patrons.
Note that you don't see the ethnicity value on the moremember.pl page even if a patron has it.
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
To test
1/ Import a patron using the patron import tool, make sure they have
no debarred column in the file
2/ Check the database, notice the debarred column is 0000-00-00
3/ For bonus points, checkout an item to that borrower, then check it in
notice Koha errors
4/ Apply patch
5/ Import a new patron
6/ Notice column is now NULL and that checkins work
Signed-off-by: Eugene Espinoza <eugenegf@yahoo.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
By default this syspref is "Do" to keep the previous behaviour.
Test plan :
1/ create 2 categories (A & B). B with enrolment fee
2/ create a patron in category A
3/ change the patron category from A to B
4/ check that the patron has an enrolment fee to pay
Apply the patch
1/ create a new patron in category A
2/ change the patron category from A to B.
3/ check that the patron has an enrolment fee to pay
4/ change the system preference 'FeeOnChangePatronCategory' to 'Don't';
5/ create a new patron in category A
6/ change the patron category from A to B
7/ check that the patron has no enrolment fee to pay
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
This patch moves the core code of two selfreg cron jobs into the Members
module. The new routines are called from cleanup_database with two new
parameters. The old cron jobs are now wrappers to cleanup_database.
As a bonus, we can add a unit test now.
In time, we can obsolete the selfreg cron jobs. For now, the code is in one
place and behavior does not change.
A next step (as described on the Bugzilla report) would be: remove the Delay
pref for self regs.
Test plan:
Run the unit test t/db_dependent/Members.t.
Test the two new parameters of cleanup_database.pl.
Verify if delete_expired_opac_registrations.pl still works.
Same for delete_unverified_opac_registrations.pl.
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
. Fixed minor merge confict on UT & cleanup_database.pl
. UT ok
. The two deprecated scripts still work as before, with a warning
message.
. cleanup_database.pl do the deletion job, calling new C4::Members
function rather that doing it directly.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
Rephrased documentation a bit, replacing fine days with the
more general term restriction. As IsDebarred checks for existing
active restrictions.
TEST PLAN
---------
1) apply patch
2) git diff origin/master
-- do the changes make sense
3) perldoc C4::Members
-- look for the IsMemberBlocked.
-- Does it reflect current state
4) koha qa test tools
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@unc.edu.ar>
The dates should be set to undef if defined but empty, otherwise with an
empty string, '0000-00-00' will be inserted into the DB.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This is the only places where SQLHelper is still called.
The C4::Members::Search is not used anymore, but ModMember and
AddMember.
This patch replaced the calls to SQLHelper to use DBIX::Class.
TODO: Move them to Koha::Borrower.
Test plan:
1/ Make sure the patron search still works (no changes expected since the
code was not in used).
2/ Add a patron with all fields filled
3/ Add another patron with some fields filled
4/ Update them with other values
5/ Delete them
You should not get any errors.
Signed-off-by: Mirko Tietgen <mirko@abunchofthings.net>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Introduced by bug 13601, and same fix used in bug 10423 and bug 12847:
the date_due retrieved from the DB is modified.
There are some problems:
1/ There is confusion between the iso and sql formats in the codebase.
2/ Since bug 13601, dt_from_string does not manage the iso format (there
are occurrences of 'iso' but it assumes that both formats are
identical).
To solve the issue, 2 solutions:
1/ Same as bug 10423 and bug 12847: try to get rid of the change done on
date_due in C4::Members::GetPendingIssues, it should be kept as the sql
value.
2/ Too many errors found and another fallback should be added to
dt_from_string (if 'iso' is passed, try sql then iso).
Test plan:
Go on the checkout list at the OPAC and confirm that the due dates are
correctly formatted.
Signed-off-by: Nicolas Legrand <nicolas.legrand@bulac.fr>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Document all expansions within C4::Members::IssueSlip()
http://bugs.koha-community.org/show_bug.cgi?id=13819
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
- Works as described. ISBN appears on ISSUESLIP & ISSUEQSLIP.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
- Not all fields for biblioitems are available, but neither
are they all available for other tables. Noted in POD.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Chris Nighswonger <cnighswonger@foundations.edu>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
http://bugs.koha-community.org/show_bug.cgi?id=9987
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The date comparisons in C4::Members::IssueSlip does not work as
expected.
Is an item is issue yesterday and due today (23:59), it should not be
considered as an overdue yet.
Test plan:
Define a valid issue slip (code ISSUESLIP)
Check 2 items out and update the issuedate value for one of them as
yesterday (using the mariadb/mysql cli or similar)
Print the slip
Before this patch the item marked as issued yesterday is considered as
overdue.
Special cases:
- hourly loans
- Quick slip is impacted too
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The previous patch did not work, only patrons *with* guanrantees were
deleted!
Signed-off-by: Koha Team AMU <koha.aixmarseille@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
C4::Borrowers::GetBorrowersToExpunge should not use a "NOT IN", it is
not efficient at all.
With only 1 guarantor and more than 136k patrons, the not in clause in
this subroutine takes ages:
mysql> select count(*) FROM borrowers where borrowernumber NOT IN
(SELECT guarantorid FROM borrowers WHERE guarantorid IS NOT NULL AND
guarantorid <> 0) ;
[...]
not ended after 5min
With the query modified by this patch, the results come after 1 sec :)
Test plan:
Verify the delete_patrons.pl cronjob or the cleanborrowers tools work as
before.
Especially with guarantors.
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Koha Team AMU <koha.aixmarseille@gmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This module is used in C4::Members::GetPendingIssues too, but we can use
dt_from_string.
Test plan:
1/ Verify that
prove t/db_dependent/Members/GetPendingIssues.t
returns green
2/ On the patron pending issue list, verify that the issue and the due
dates are correctly displayed.
Tested together with other patches (except "Fix special cases). Worked as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The browse by last name letters on the patron search for the patron card
creator doesn't work quite right. If extended patron attributes are
disabled, it works fine, but if they are enabled, they are searched even
when using the browse last name. Thus, if a searchable attribute has a
"D" in it, and one clicks the "D" link for the last name browser, that
patron will show even if he or she has no "D" in his or her hame!
Test Plan:
1) Enable extended patron attributes
2) Add a new searchable patron attribute
3) Create a new patron with the last name "Ace"
4) Add the value "D" to the attribute for this patron
5) Browse to the patron card maker, start a new patron batch
6) Click "Add item(s)" to bring up the patron search
7) Click the letter "D" in the patron search box
8) Note that "Ace" shows in the results list
9) Apply this patch
10) Repeat step 7
11) Note that "Ace" no longer shows in the results list
12) Perform a regular search by putting the letter "D" in the "Name:"
field, and hit the "Search" button
13) Note this time the results *do* have Ace in them
Signed-off-by: Frederic Demians <f.demians@tamil.fr>
Well described for a tricky bug. Reproducible. Fixed with this patch.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
This works as described, no problems or regressions found.
Signed-off-by: Rochelle <Rochelle_healy@hotmail.com>
http://bugs.koha-community.org/show_bug.cgi?id=12889
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
When only the card number is passed to GetMemberDetail, the
value of $borrowernumber is undefined. Even after finding the
correct borrower and providing a nice hash ($borrower), the
GetMemberAccountRecords is called with the wrong borrower number,
even though it is in the hash ($borrower).
This was fixed by changing $borrowernumber to
$borrower->{borrowernumber}, so that the hash's value will always
be used, since it is correct regardless of whether borrowernumber
or cardnumber were used to find the borrower.
TEST PLAN
---------
1) Apply both patches
2) prove -v t/db_dependent/Member.t
-- This time the previously failing test will pass.
3) run koha QA test tools.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
To test
1/ Create a borrower with '' as their userid, you may have to edit a
row in the db to do this
2/ Run perl t/db_dependent/Circulation/CheckIfIssuedToPatron.t
3/ Notice some tests fail and you see
DBD::mysql::st execute failed: Duplicate entry '' for key 'userid'
at /home/chrisc/git/catalyst-koha/C4/SQLHelper.pm line 184.
4/ Apply the patch
5/ Run the tests again, notice they now pass
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
- $data{'userid'} = Generate_Userid($data{'borrowernumber'},
$data{'firstname'}, $data{'surname'}) if $data{'userid'} eq '';
+ $data{'userid'} = Generate_Userid( $data{'borrowernumber'},
$data{'firstname'}, $data{'surname'} )
+ if ( $data{'userid'} eq '' || Check_Userid( $data{'userid'} ) );
Check_Userid returns 1 if it is unique. So this means unique userids
will always be discarded and new ones created.
This is why all the tests depending on a userid are now failing
To test
1/ run perl t/db_dependent/Serials_2.t
2/ Notice lots of tests fail
3/ OR Add a borrower with a userid set, notice the userid is ignored
and one is generated instead
4/ Apply patch
5/ Add a new borrower, notice the userid sticks (if it is unique)
6/ Run perl t/db_dependent/Serials_2.t notice tests pass
7/ Run perl t/db_dependent/Members.t notice tests still pass
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Check_Userid assumes that a borrowernumber will always be passed in
and thus fails to to return 0 for an already used userid when creating
a new patron.
Unit tests must now also me modified to no longer assume it is possible
to create multiple patrons with the same userid.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
1) Be more careful when checking the NorwegianPatronDBEnable syspref.
Before:
if ( C4::Context->preference('NorwegianPatronDBEnable') == 1 ) {
After:
if ( C4::Context->preference('NorwegianPatronDBEnable') && C4::Context->preference('NorwegianPatronDBEnable') == 1 ) {
This should avoid complaints if the syspref is not initialized.
2) Fix some empty =head2 POD sections
3) Fix some indentation in patrons.pref, to make xt/yaml_valid.t happy
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
I couldn't find any regressions with adding, editing and deleting members.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The QA script was complaining about some dodgy POD in C4/Members.pm,
that was not introduced by bug 11401. This patch fixes the POD, to
keep the QA script happy.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch makes it possible to sync patron data between Koha and the
Norwegian national patron database, in both directions.
In order to use this, the following information is necessary:
- a username/password from the Norwegian national database of libraries
("Base Bibliotek"), available to all Norwegian libraries
- a special key in order to decrypt and encrypt PIN-codes/passwords,
which is only available to Norwegian library system vendors
- a norwegian library vendor username/password
See http://www.lanekortet.no/ for more information (in Norwegian).
While this is of course an implementation of a specific synchronization scheme
for borrower data, attempts have been made to prepare the ground for other sync
schemes that might be implemented later. Especially the structure of the new
borrower_sync table might be reviewed with an eye to how it might fit other
schemes.
To test:
Since the password and cryptographic key needed to use this functionality
is only available to Norwegian library system vendors, only regression testing
can be done on the submitted code. Suggested things to check:
- Apply the patch and make sure the database update is done. This should add
the new "borrower_sync" table and five new systmpreferences under the
"Patrons" > "Norwegian patron database" category:
- NorwegianPatronDBEnable
- NorwegianPatronDBEndpoint
- NorwegianPatronDBUsername
- NorwegianPatronDBPassword
- NorwegianPatronDBSearchNLAfterLocalHit
- Check that patrons can be created, edited and deleted as usual, when
NorwegianPatronDBEnable is set to "Disable"
- Check that the new tests in t/NorwegianPatronDB.pm run ok, e.g. on a
gitified setup:
$ sudo koha-shell -c "PERL5LIB=/path/to/kohaclone prove -v t/NorwegianPatronDB.t" instancename
- Check that all the other tests still run ok
- Check that the POD in the new files itroduced by this patch looks ok:
- Koha/NorwegianPatronDB.pm
- members/nl-search.pl
- misc/cronjobs/nl-sync-from-koha.pl
- misc/cronjobs/nl-sync-to-koha.pl
- t/NorwegianPatronDB.t
Sponsored-by: Oslo Public Library
Update 2014-09-18:
- Rebase on master
- Split out changes to Koha::Schema
- Incorporate new way of authenticating with NL
Update 2014-10-21:
- Rebase on master
- Use Module::Load to load Koha::NorwegianPatronDB in non-NL-specific
scripts and modules
- Fix the version number of Digest::SHA
- Fix a missing semicolon in kohastructure.sql
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch moves the logic of deciding whether or not a borrower is old enough to access this material
to its own function GetAgeRestriction.
This makes it easier to use AgeRestriction elsewhere, like with placing holds.
This feature adds a new function C4::Members::SetAge() to make testing ages a lot easier.
A ton of Unit tests included.
C4::Circulate::CanBookBeIssued() fixed and issue with undefined $daysToAgeRestriction per Marc Véron's
suggestion.
Test plan:
(See comment #10 for screenshots about using age restriction)
1) Without patch
Configure Age Restricition (see Syspref AgeRestrictionMarker) and have a biblio record with e.g. PEGI 99 in age restriction field
Try to check out to a patron with age < 99
Check out should be blocked
Change entry in age restriction field to PEGI99
Check out schould now be blocked
2) With patch
Try checkouts again, behaviour should be th same.
Signed-off-by: Marc Veron <veron@veron.ch>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
I could reproduce this problem in 3.14.4 where I wrote the patch.
Fields shifted like branchcode moved to B_phone.
Could not reproduce it for master.
But this code change seems to improve things on master too.
TEST PLAN
---------
1) Alter the order of your deletedborrowers table.
e.g. alter table deletedborrowers change column privacy privacy int(11) after city;
2) Apply the 3.14.x test patch.
3) prove -v t/db_dependent/Members.t
-- Will fail on the new test.
4) Apply the 3.14.x code change patch.
5) prove -v t/db_dependent/Members.t
-- Will succeed on the new test.
6) run koha qa test tools.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
The message in circulation.tt assumed to get days but date is given. Updated comments and message depending on expiration date or no expiration of restriction.
The message shows up on top of Bug 643 Allow override of 'debarred' status if a patron has a restriction.
Replaced date_format with date template (see comment #6)
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Currently, if you have holds charges, they are not taken into
consideration when circulating items.
Manual Invoices, and rental charges are governed by a systempreference
Holds are never counted
And all other charges (overdues, lost items etc) are counted
This patch adds a systempreference to allow Hold charges to be counted
as well.
To test
1/ Set a borrower category to have holds charges
2/ Place a hold for a borrower in that category
3/ Go to checkout, notice that charge is not showing or blocking on
that screen
4/ apply patch
5/ notice that charge now shows on checkout
Signed-off-by: Nick Clemens <nick@quecheelibrary.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
Adding unit tests for the routines AddMessage, GetMessages, GetMessagesCount and DeleteMessage in t/db_dependent/Members.t
Adding unit tests for the routines GetPendingIssues and GetAllIssues in separate files : t/db_dependent/Members/GetPendingIssues.t and t/db_dependent/Members/GetAllIssues.t
The routine GetAllIssues has been modified because it does not test if the arguments was defined :
- the borrowernumber argument is required
- if the order argument is not given, it takes a value by default : 'date_due desc'
- the limit argument is optional
Test plan:
1/ Apply the patch
2/ Execute : prove t/db_dependent/Members.t t/db_dependent/Members/GetAllIssues.t t/db_dependent/Members/GetPendingIssues.t
3/ The result has to be a success without error or warning :
t/db_dependent/Members.t ................... ok
t/db_dependent/Members/GetAllIssues.t ...... ok
t/db_dependent/Members/GetPendingIssues.t .. ok
All tests successful.
Files=3, Tests=83, 5 wallclock secs ( 0.06 usr 0.01 sys + 4.68 cusr 0.26 csys = 5.01 CPU)
Result: PASS
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Amended patch: perltidy on t/db_dependent/Members/*
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>
This patch add DataTables using server-side processing for the patrons
search.
It adds:
- 1 module C4/Utils/DataTables/Members.pm
- 2 services svc/members/search and svc/members/add_to_list
- 1 template members/tables/members_results.tt
- 1 new practice which is to add template for DataTables in a
subdirectory named 'tables'.
Impacted scripts: members/members-home.pl and members/members.pl
To go further: We can imagine that all patrons searches use the same
service with no big changes: 1 little template creates a JSON file and
to implement DataTables on the template page, that's all.
Amended patch: Since bug 10565 has been pushed, these patches don't
apply cleanly. I had to rewrite a part of the patron list feature.
I removed the choice to add all resultant patrons from a search. I think
this choice is useless with this patch: we are able to display the
number of patrons we want and to select all of them.
Test plan:
- Check that there is no regression on searching patrons.
- Try filters on the left of the screen.
- Try to sort each column.
- Try the "Browse by last name" links.
- Check that the "Clear" button clears yours filters.
- Try with IndependantBranches ON and OFF.
- Verify this feature does not break the patron list feature (cf bug
10565).
Signed-off-by: Cedric Vita <cedric.vita@dracenie.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script, couldn't find any regressions
or problems. Some notes left on the bug.
Bug 9811: Add unit tests for C4::Utils::DT::Members
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Bug 9811: QA followup
- removes 2 tabs
- removes mysqlisms
- add sort on borrowernotes
- fix wrong capitalization
- cat => Category
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Thx for fixing these!
Bug 9811 - multilines notes brakes JSON
In new patron search feature, the search results are fetched using Ajax and returned in JSON format.
The JSON is created by TT using koha-tmpl/intranet-tmpl/prog/en/modules/members/tables/members_results.tt.
One of the fields is the borrower notes. When this notes contains several lines, the JSON is broken.
This patch uses TT fileters to consert in notes linefeeds into HTML line break (html_line_break) and then remove linefeeds (collapse).
Test plan :
- perform a member search that does not return a borrower with a circ note
- edit one of the borrowers returned by this search
- enter serveral lines of text in "Circulation note" and save
- reperform the member search
=> circ note is well displayed on several lines
Bug 9811: use count(primary_key) instead of count(*)
Bug 9811: A limit clause should be always added.
By default, we want to retrieve 20 first results.
Bug 9811: Load the page without any data.
Displaying the first 20 patrons is not useful. With this patch, the
table is hidden and no record is retrieved by default.
On the same way, the existing side effect on redirect disappears.
Signed-off-by: Olli-Antti Kivilahti <olli-antti.kivilahti@jns.fi>
-------------
-TEST REPORT-
-------------
For the filter: Tested all the search fields, branches, search type.
Found a bug with "date of birth", followup provided.
Tested display limits and verified that AJAX-queries are
efficient (using LIMIT clause) to not stress DB needlessly.
Tested adding Patrons to a list.
A good feature, which seems to work quite well.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Adding my test plan to the last patch of this bug.
Signed-off-by: Tomas Cohen Arazi <tomascohen@gmail.com>