This patch modifies the maximum size of a patron's image, from 500KB to
2MB. Also, in Home/Patrons/anyPatron, when you try to add an image to a
patron, you can now see the supported file types AND the maximum size.
The following places are affected by this patch:
- Home/Patrons/anyPatron
- Home/Tools/Upload patron images
- Home/Tools/Patron card creator/Images
To test:
1)Search for any patron and go to his page.
2)Hover over the image area on the left and click on the "Add" button.
3)Notice that the message above the choose file button only specifies
file types without the maximum size.
4)Add an image bigger than 500KB.
5)Nothing happens. (This is because the maximum size is 5KB)
6)Apply the patch.
7)Repeat steps from 1 to 3.
8)Notice that the message now includes the maximum size.
9)Add an image bigger than 500KB, but smaller than 2MB.
10)The image is succesfully uploaded.
11)Add an image bigger than 2MB.
12)Nothing happens. (The maximum size is now 2MB)
13)Repeat the steps 9 to 12 in "Home/Tools/Upload patron images" and
"Home/Tools/Patron card creator/Images".
14)Notice that the maximum size is updated.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
This patch makes tools/cleanborrowers.pl use the new methods.
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
and some more...
There are lot of inconsistencies in our ->search calls. We could
simplify some of them, but not in this patch. Here we want to prevent
regressions as much as possible and so don't add unecessary changes.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
DBIC handles DateTime correctly, no need for this output_pref call.
Test plan:
Create a new content, set the dates, confirm they are set correctly
Modify the content, modify the dates, confirm they are stored correctly
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
When deleting a content, only the main one (lang="default") is removed,
which leads to orphan contents in the DB that are still displayed on the
UI.
Test plan:
0. Don't apply this patch
1. Create some contents, translate them in different languages
2. Delete some of them
=> Note that they are still displayed on the UI and that the entries
with lang!="default" are still in the DB
3. Apply this patch
4. Repeat 1
5. Run updatedatabase
6. Delete from of the contents
=> Note that the orphan entries created before you applied the patch
have been removed and that the "delete" behaviour is now working
correnctly.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Add a column "Subscriptions" to the batch deletion tools
Add a link on the number of subscription to the search page with all the subscriptions of the record
Add a button in the toolbar to select only biblio record without subscriptions
The changes are only on display
It is still possible to delete records that are attached to subscriptions from this tool (as it is possible for records with attached items)
To test:
1) Go to the batch record deletion (in tools)
2) Select a list of record numbers (select some with one or more subscription)
3) Click on Continue
4) Check that there is no column named "Subscription" and that there is no button "Select without subscription" in the toolbar
5) Apply patch
6) Repeat steps 1 to 3
7a) Check that there is a column named "Subscription" fill with the number of subscriptions attached to the record
7b) Check that the link in the subscriptions column send you to the search page with the subscriptions linked to this record
7c) Check that there is a button "Select without subscription" in the toolbar that selects record with no subscription attached
8) Sign off
Signed-off-by: Frank Hansen <frank.hansen@ub.lu.se>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
additional_contents.code is used to group DB rows together. Each row
represent one content in a given language, and the code is used to know
they are translation of the lang='default' one.
It's not really useful for the end user and we could hide it and
generate it.
Test plan:
Create/Edit/Delete additional contents (news and HTML customizations)
and confirm that they are correctly grouped together.
You need several languages installed to test this patch correctly.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The commit "Bug 29290: Rename relationships borrower =>
patron" (d46492ac23) renamed the relation for the borrowers table from
'borrower' to 'patron' but the joins were not updated accordingly so a
few scripts got broken.
To test:
1) Notice that
$ perl misc/cronjobs/automatic_renewals.pl -c -s -v
returns 255 error code on exit
2) Apply patch
3) Notice the automatic_renewals.pl works now and exit code is 0
4) Make sure /cgi-bin/koha/tools/batch_extend_due_dates.pl works.
5) Try to grep for 'borrower' in Koha source code and see if there
are any other join done using the Koha::Checkout or
Koha::Old::Checkout objects.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 29380: (follow-up) Fix renewal feature in staff interface
The commit "Bug 29290: Rename relationships borrower =>
patron" (d46492ac23) renamed the relation for the borrowers table from
'borrower' to 'patron' but the usage in the renew.pl script was not
updated.
To test:
1) Try to renew a book in intranet through the renewal tab
2) Notice it gives error
3) Apply patch
4) Notice the error is now gone
Signed-off-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
No method count found for Koha::Virtualshelves DBIx::Class::Storage::DBI::_dbh_execute(): DBI Exception: DBD::mysql::st execute failed: Unknown column 'category' in 'where clause' at /kohadevbox/koha/Koha/Objects.pm line 601 at /kohadevbox/koha/koha-tmpl/intranet-tmpl/prog/en/modules/tools/batch_record_modification.tt line 80.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch renames the (passed through) 'context' param for
'overlay_context'. I propose doing so, because in Koha-land 'context'
has a special meaning, related to C4::Context and it reads ambigous.
The patch itself is pretty trivial.
Tests should pass:
1. Run:
$ kshell
k$ prove t/db_dependent/Biblio/MarcOverlayRules.t
=> SUCCESS: Tests pass
2. Apply this patch
3. Repeat 1
=> SUCCESS: Tests still pass!
4. Sign off :-D
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 14957: (follow-up) Clarify 'context' param
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Add a rule based system for merging MARC records to for example
prevent field data from being overwritten.
To test:
1. Apply this patch.
2. Log in to staff client.
3. Enable new syspref MARCMergeRules.
4. Click the new link "MARC merge rules" in the "Catalog"
section of the Koha administration page.
5. Create a new rule:
Module: source, Filter: *, Tag: 245, Preset: Protect.
6. Clicking "Edit" should allow you to edit corresponding rule.
7. Clicking "Delete" should remove corresponding rule after confirmation.
8. Selecting one or more rules followed by clicking "Delete
selected" should remove all selected rules after confirmation.
9. Try creating a rule with tag set to "**", the other options does
not matter. Verify that saving this rule produces an error
message complaining about invalid tag regular expression.
10. Try creating a rule with tag set to "008" (or other control
field) and set Appended: Append and Removed: Skip, the other
options does not matter. Verify that saving this rule produces
an error message complaining about invalid combination of actions
for control field.
11. With the 245 rule in step 5 in place, edit a bibliographic record,
change 245a for example (which should be Title for MARC21) and save.
12. Verify that the changes has not been saved.
13. Create a new rule:
Module: source, Filter: intranet, Tag: 245, Preset: Overwrite.
14. Repeat step 12, and verify that the changes has now been saved.
15. Run tests in t/db_dependent/Biblio/MarcMergeRules.t and very
that all tests pass.
Sponsored-by: Halland County Library
Sponsored-by: Catalyst IT
Sponsored-by: Gothenburg University Library
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Christian Stelzenmüller <christian.stelzenmueller@bsz-bw.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The previous patch makes check_cookie_auth return the session instead of
$sessionID, so we are adjusting the different calls to prevent
confusion.
However they are mainly used to check the authentication status and
don't care about this second variable.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The value of the checkbox was not correct
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Here we go!
Disclaimer: this patch is huge and does many things, but splitting it in
several chunks would be time consuming and painful to rebase. However it
adds many tests and isolate/refactor code to make it way more reusable.
This patchset will make the "batch item modification" and "batch item
deletion" features use the task queue (reminder: Since bug 28158, and so
21.05.00, we do no longer use the old "background job" functionality and
the user does not get any info about the progress of the job).
More than that, more of the code to build an item form and a list of
items is now isolated in module (.pm) and include files (.inc)
We are reusing the changes made by bug 27526 that simplifies the way we
edit/create items (no more unecessary serialization Koha > MARC > MARCXML
> XML > HTML)
New module:
* Koha::BackgroundJob::BatchDeleteItem
Subclass for process item deletion in batch
* Koha::BackgroundJob::BatchUpdateItem
Subclass for process item modification in batch
* Koha::Item::Attributes
We needed an object to represent item's attributes that are not
mapped with a koha field (aka "more subfields xml")
This module will help us to create the marcxml from a hashref and the
reverse.
* Koha::UI::Form::Builder::Item
The code that was used to build the add/edit item form is
centralised in this module. In conjunction with the
subfields_for_item BLOCK (from html_helpers.inc) it will be really
easy to reuse this code in other places where the item form is used
(acquisition and serials modules)
* Koha::UI::Table::Builder::Items
Same as previously for the table. We are now using this table from 3
different places (batch item mod, batch item del, backgroung job
detail view) and the code is only in one place.
To use with items_table_batchmod BLOCK (still from html_helpers.inc)
This patch is fixing some bugs about repeatable subfields and regex. A UI
change will reflect the limitation: if you want to apply a regex on a
subfield you cannot add several subfields for the same subfield code.
Test plan:
Prepare the ground:
- Make sure you are always using a bibliographic/item record using the framework
you are modifying!
- Add some subfields for items that are not mapped with a koha field
(note that you can use 'é' for more fun, don't try more funny
characters)
- Make some subfields (mapped and not mapped with a kohafield)
repeatable
- Add default values to some of your subfields
There are 4 main screens to test:
1. Add/edit item form
The behaviour should be the same before and after this patch.
See test plan from bug 27526.
Those 2 prefs must be tested:
* SubfieldsToAllowForRestrictedEditing
* SubfieldsToUseWhenPrefill
2. Batch modification
a. Fill some values, play with repeatable and regex.
Note that the behaviour in master was buggy, only the first value was modified by the regex:
* With subfield = "a | b"
1 value added with "new"
=> "new | b"
* With subfield = "a | b"
2 new fields "new1","new2"
=> "new2 | b"
Important note: For repeatable subfields, a regex will apply on the subfields in
the "concatenated form". To apply the regex on all the different subfields of a given
subfield code you must use the "g" modifier.
This could be improved later, but keep in mind that it's not a regression or behaviour
change.
b. Play with the "Populate fields with default values from default framework" checkbox
c. Use this tool to modify items and play with the different sysprefs that
interfer with it:
* NewItemsDefaultLocation
* SubfieldsToAllowForRestrictedBatchmod
* MaxItemsToDisplayForBatchMod
* MaxItemsToProcessForBatchMod
3. Batch deletion
a. Batch delete some items
b. Check items out and try to delete them
c. Use the "Delete records if no items remain" checkbox to delete
bibliographic records without remaining items.
d. Play with the following sysprefs and confirm that it works as
expected:
* MaxItemsToDisplayForBatchDel
e. Stress the tool: Go to the confirmation screen with items that can be
deleted, don't request the job to be processed right away, but check the
item out before.
4. Background job detail view
You must have seen it already if you are curious and tested the above.
When a new modification or deletion batch is requested, the confirmation
screen will tell you that the job has enqueued. A link to the progress
of the job can be followed.
On this screen you will be able to see the result of the job once it's
fully processed.
QA notes:
* There are some FIXME's that are not blocker in my opinion. Feel free to
discuss them if you have suggestions.
* Do we still need MaxItemsToProcessForBatchMod?
* Prior to this patchset we had a "Return to the cataloging module" link
if we went from the cataloguing module and that the biblio was deleted.
We cannot longer know if the biblio will be deleted but we could display
a "Go to the cataloging module" link on the "job has been enqueued"
screen regardless from where we were coming from.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Now that it's reusable, let use it somewhere else!
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
There is a "tabloop" variable that is passed from the add item form logic to the cataloguing plugins.
But there is confusion, sometimes it's an iterator ($i) and sometimes (batchMod.pl) an array.
Actually this tabloop variable is never used from cataloguing plugins, we should remove it.
Test plan:
Read the code and confirm the above.
You can also test a couple of plugins and confirm that they are still
working.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The indicator value for 952 was hard coded in every case to " ". In
order to achieve that we can simply pass undef to TransformHtmlToXml()
and it will set the indicator values to " ".
To test:
1) Make sure the submission of (at least some) the modified files
still work, e.g. test that making a new item via
cataloguing/additem.pl works.
Signed-off-by: Petro Vashchuk <stalkernoid@gmail.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Rebased-by: Joonas Kylmälä <joonas.kylmala@iki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It has been missed on bug 17600.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Adjusted commit title.
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Some of our partners have unusual barcode requirements that have
required us to transform scanned barcodes using javascript. This is not
the most reliable method. It would make more sense to have Koha
transform the barcodes on the backend using a plugin. We should add
hooks to transform and generate new item and patron barcodes.
Test Plan:
1) Apply this patch
2) Download and install the Barcode Transformer plugin
https://github.com/bywatersolutions/koha-plugin-barcode-transformer/releases/
3) Go to the plugin configuration page, set the configuration to the example configuration from the same page
4) In the item barcode field on the checkin and checkout pages,
and anywhere else you can scan an item barcode, type in some
valid barcodes, but prefix them with X and postfix them with
Y, e.g. X123456Y
5) Note the letters are removed by Koha!
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: (QA follow-up) Fix QA script issue
* Fixes issue with barcode generate stub so perlcritic is happy
* Removes extra semicolon from return call in configure method
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: Add unit tests
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: (QA follow-up) Remove unused method barcode_transform
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: (QA follow-up) Rename barcode_transform to item_barcode_transform
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: (QA follow-up) Barcodes inputted into Koha should always pass though barcodedecode
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: (QA follow-up) Catch one last case of itemBarcodeInputFilter
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: (QA follow-up) Fix Checkouts.t
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: Use call_recursive() as a replacement for call()
The method `call()` is not sufficient for barcode transformations. It's
possible that more than one barcode transformation plugin will be
installed. The `call_recursive()` method takes the output of the first
plugin and uses it as the input for the next plugin and so on. This allowes
each plugin to see the current version of the barcode and modify it if
necessary.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Bug 26351: Fix t/db_dependent/Koha/Plugins/Circulation_hooks.t
Bug 26351: Revert improper change to unit test, fix number of tests
Bug 26351: Remove uneeded use Koha::Plugins statements
Left over from previous changes
Bug 26351: Add missing barcodedecode import
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The logging for additional contents added by bug 26205 has been broken
by but 22544.
This patch is a revisited version as bug 24387 has been pushed.
It does not log MODIFY if no modification has been made on a template
(useful when only 1 version/lang of a content has been modified)
Test plan:
Turn on NewsLog
Add/modify and delete additional contents/News and confirm that
modification are logged.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Same as the first patch, for authorities
Test plan:
Delete authority records using the batch record deletion tool
Confirm that the job is now delegated to the task queue and that
everything else is working as before
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch takes advantage of the task queue to delegate the batch
delete biblios tool.
Test plan:
Delete bibliographic records using the batch record deletion tool
Confirm that the job is now delegated to the task queue and that
everything else is working as before
Signed-off-by: Fridolin Somers <fridolin.somers@biblibre.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch makes some corrections to additional contents to allow
content to be deleted. The wrong parameter was being passed to the
script. The script was also not handling multiple deletions correctly.
The patch also adds a "category" parameter to the delete operation so
that the page is redirected correctly.
The patch also changes some strings which referred to "news"
referencing operations which might be performed on news or on HTML
customizations, e.g.:
"Are you sure you want to delete the selected content?" instead of "Are
you sure you want to delete the selected news?"
To test, apply the patch and go to Tools -> News.
- Create multiple news items if necessary.
- Test the "Delete" button corresponding to a single news item:
- Clicking the button should ask you to confirm.
- Check that the wording of the message is correct.
- After confirming the news item should be deleted.
- Ideally, test on news items which are on the second page of the
DataTable of news items.
- Test the process of deleting multiple news items at once:
- Check the checkbox next to multiple items.
- Click the "Delete selected" button at the bottom of the page.
- Check that the wording of the confirmation message is correct.
- After you confirm, the items should be deleted.
- Repeat these tests under Tools -> HTML customizations to confirm that
redirects work correctly. After deleting an HTML customization you
should be redirected back to the list of HTML customizations.
Signed-off-by: Caroline Cyr La Rose <caroline.cyr-la-rose@inlibro.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds batch patron modifications based on borrowernumber. The
user can choose to upload a file of borrowernumbers or submit a list of
borrowernumbers in a textarea, just like they can with card numbers.
To test, apply the patch and prepare files containing borrowernumbers
and card numbers. Patron lists should be enabled, and you should have at
least one patron list with patrons on it.
- Go to Tools -> Batch patron modification.
- You should see three tabs: "By card number," "By borrowernumber," and
"By patron list."
- Test each option for batch patron modifications:
- By card number file
- By card number list
- By borrowernumber file
- By borrowernumber list
- By patron list
- In each case the correct batch should be submitted, and modifications
should finish correctly..
- There should be an "order of operations" for card numbers and
borrowernumbers:
- If a file is uploaded AND a list of numbers is entered, the list of
numbers should be used.
- Batches should only get submitted from the active tab.
- If you upload a file or enter card numbers in one tab and then
switch to another tab and submit numbers from there, the original
tab's batches should be ignored.
Signed-off-by: kelly mcelligott <kelly@bywatersolutions.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It has never been used and should be removed
Test plan:
Search for "find_value" in the file and confirm that there is no more
occurrence
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Raised by the QA script, a couple issues carried by pre-17600 patches.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
One big patch for one big move.
The "News" feature (opac_news) has been hijacked to handle some system
preferences (bug 26050). The goal was to take profit of the UI (editor)
and the ability to translate the value.
Disclaimer: This patch is NOT offering the best implementation but, as
we still don't have bug 24975, it cannot be done now. And no, we don't
want to wait for it to move forward here. This patch is going into the
right direction anyway.
This enhancement is going to rename the "News" with a more genertic
"Additional contents". We have two different "categories" of content:
"news" and "html customizations".
What does it bring?
- A split on the UI for disambigate the two types of content (news and
syspref/html customizations)
- A simplification of the edit form: all languages will be translatable
on the same view (like the "notice templates")
- Ground will be prepared for different types of content (if needed later)
- Staff news can be translated
How was the "News" area working before this patch?
The opac_news DB table contained a (very inconsistent) 'lang' column.
The different values were:
- '' => news to display at the OPAC and staff interfaces
- 'koha' => news for staff only
- 'slip' => news for slip notices
- $lang => news for OPAC only, translated in $lang ('en', 'es-ES', etc.)
- "$location_$lang" => A syspref moved to this "news" area. The syspref
is $location, and is translated in $lang. Eg. OpacLoginInstructions_en,
OpacLoginInstructions_fr-FR, opacheader_es-ES
This patch is improving the DB structure with the following changes:
- renaming 'opac_news' with 'additional_contents'
- new 'category' column
=> 'news' or 'html_customizations'
- new 'location' column
=> For 'news': 'staff_and_opac', 'staff_only', 'slip'
=> For 'html_customizations': the old syspref name (eg. 'OpacLoginInstructions').
- new 'code' column (see later for more info)
- the 'lang' column will only contain the language code ('en', 'es-ES',
etc.). BUT a 'default' entry will ALWAYS exist for fallback behaviour.
We are getting closer to the 'notice template' table structure because
we want to match its UI. The 'code' column will bring us the ability to
group the different 'additional_contents' rows. The code for a given
news will be the same, but the (lang, title, content) will differ.
Examples:
News 1 will have, for each of the translated versions
(category, code, location, branchcode)
('news', 'News1', $location, $branchcode||undef)
And the 3 following columns will differ:
(title, content, lang)
('title for news 1', 'content for news 1', 'default')
('titulo para 1', 'contenido para 1', 'es-ES')
Note that the "category" is not strictely necessary, but it seems better
to have the ability to split the different content by category/type
easily.
Additional changes:
- Syspref 'NewsToolEditor' is renamed 'AdditionalContentsEditor'
- Koha::NewItem => Koha::AdditionalContent
- Koha::News => Koha::AdditionalContents
- Script and template renamed from koha-news to additional-contents
- Foreign keys have been renamed
- Subpermission edit_news has been renamed edit_additional_contents
- The UI can now be accessed via a "News" or "HTML customizations" link
from the tools module. The related contents will then be displayed (both
categories are now split)
Changes not done here:
- Primary key 'idnew' could be renamed 'id'
Limitations of the upgrade:
News cannot be grouped by a unique code for existing translations.
=> A given news will be now displayed several times on the translated
interface
Any ideas to improve the upgrade behaviour?
We will have to add a warning in the release notes to tell libraries to
review their news.
Test plan:
0. Don't apply the patches
1. Translate the interfaces in some languages
. Create some news for staff and OPAC
. Create some content for different entry of HTML customizations
Note that you are forced to define a 'default'.
Also note that you are only forced to fill the title (not the content).
This is certainly problematic (see FIXME in the code) as sometime only
the content is displayed.
. Play with the interface (edit, delete, filter)
. Go to the different places the news are displayed, and confirm they
are displayed correctly (staff home, opac home, opac rss)
. Create 1+ news for 'slip', check an item out and 'print slip' (from
the circulation page). You must see the news.
. Go to the different places you are expecting the HTML customizations
to be present and confirm that you see them.
. Switch the lang of the interface and confirm that you now see the
content in the translated version
. Generate the templates in another language, don't translate the
content
. Use this language for the interface and confirm that the 'default'
version is displauyed.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Bug 12759 added the ability to pass list contents to batch record
modification/deletion tools.
Patch Bug 22417 [Restore the 'add to list' feature] removed the fetch
of lists in batch_record_modification.pl I don't understand why.
It still exists in batch_delete_records.pl.
Note that this is needed when first form is displayed.
Test plan :
1) Create a private and a public list of records
2) Open Tools > Batch record modification
3) Check you can use the lists
4) Open Tools > Batch record deletion
5) Check you can use the lists
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
To test:
1. have multiple news
2. check several of them and and click 'Delete selected'
3. see ugly error
4. apply patch
5. try again
6. no error
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Caused by bug 28158, the batch item modifications tool does not longer
display the table with the items that have been modified on the result screen.
There is no more fork and so no more completedJobID var.
We must process the items THEN build the items' info.
Test plan:
Use the batch item modification tools to modify some items.
Confirm that with this patch the table with the modified items is
displayed on the last screen.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Undefined subroutine &CGI::Compile::ROOT::kohadevbox_koha_tools_batchMod_2epl::haspermission called at /kohadevbox/koha/tools/batchMod.pl line 89
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
On bug 17591 we discovered that there was something weird going on with
the way we export and use subroutines/modules.
This patch tries to standardize our EXPORT to use EXPORT_OK only.
That way we will need to explicitely define the subroutine we want to
use from a module.
This patch is a squashed version of:
Bug 17600: After export.pl
Bug 17600: After perlimport
Bug 17600: Manual changes
Bug 17600: Other manual changes after second perlimports run
Bug 17600: Fix tests
And a lot of other manual changes.
export.pl is a dirty script that can be found on bug 17600.
"perlimport" is:
git clone https://github.com/oalders/App-perlimports.git
cd App-perlimports/
cpanm --installdeps .
export PERL5LIB="$PERL5LIB:/kohadevbox/koha/App-perlimports/lib"
find . \( -name "*.pl" -o -name "*.pm" \) -exec perl App-perlimports/script/perlimports --inplace-edit --no-preserve-unused --filename {} \;
The ideas of this patch are to:
* use EXPORT_OK instead of EXPORT
* perltidy the EXPORT_OK list
* remove '&' before the subroutine names
* remove some uneeded use statements
* explicitely import the subroutines we need within the controllers or
modules
Note that the private subroutines (starting with _) should not be
exported (and not used from outside of the module except from tests).
EXPORT vs EXPORT_OK (from
https://www.thegeekstuff.com/2010/06/perl-exporter-examples/)
"""
Export allows to export the functions and variables of modules to user’s namespace using the standard import method. This way, we don’t need to create the objects for the modules to access it’s members.
@EXPORT and @EXPORT_OK are the two main variables used during export operation.
@EXPORT contains list of symbols (subroutines and variables) of the module to be exported into the caller namespace.
@EXPORT_OK does export of symbols on demand basis.
"""
If this patch caused a conflict with a patch you wrote prior to its
push:
* Make sure you are not reintroducing a "use" statement that has been
removed
* "$subroutine" is not exported by the C4::$MODULE module
means that you need to add the subroutine to the @EXPORT_OK list
* Bareword "$subroutine" not allowed while "strict subs"
means that you didn't imported the subroutine from the module:
- use $MODULE qw( $subroutine list );
You can also use the fully qualified namespace: C4::$MODULE::$subroutine
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch modifies the script and template so that if the user submits
a search by category, that category will be preselected on the search
results page.
Also added is an empty "Choose" option so that a search category isn't
selected by default.
To test, apply the patch and view the uploads page.
- In the category search form, a "Choose" option should be selected.
Submitting the form without selecting a category should not work.
- Search using one of your existing categories. On the search results
page the category you selected should remain selected.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Some libraries would like to be able to preserve particular fields for
existing patrons when overwriting them via the patron import tool.
Effectively, this means the specified columns of the CSV are used for
new patrons, but ignored for existing patrons.
Test Plan:
1) Create a patron CSV with one new patron, make the surname and
firstname "Test1". Add a cardnumber so we can upload it again later.
2) Import the file
3) Change the firstname and surname in the CSV to "Test2"
4) Return to the patron import tool, choose to match on cardnumber,
overwrite existing patrons, and preserve exiting firstnames
5) Import the file with these settings
6) Referesh the patron details for this patron, the patron's surname
should still be "Test" while the firstname should now be "Test2"
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 22544: fix count call - to squash
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We should remove the debug statements or use Koha::Logger when we want
to keep it.
Test plan:
Confirm that occurrences of remaining occurrences of DEBUG need to be
kept (historical scripts for instance)
Confirm that the occurrences removed by this patch can be removed
Confirm that the occurrences replaced by Koha::Logger are correct
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Looks good to me, noting a few minor points on BZ.
JD amended patch: replace "warn #Finished" with "#warn Finished", and
put the statement on a single line
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We are using Koha::Logger when it makes sense to keep the info,
otherwise we simply remove it
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 28572: Replace missing occurrence in misc/admin/koha-preferences
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
There is a "debug" parameter we are passing from the controller scripts
to C4::Auth::get_template_and_user, but it's not actually used!
Test plan:
Confirm the assumption
Review the changes from this patch
Generated with:
perl -p -i -e 's#\s*debug\s*=\>\s*(0|1),?\s*##gms' **/*.pl
git checkout misc/devel/update_dbix_class_files.pl # Wrong catch
+ Manual fix in acqui/neworderempty.pl
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The way we handle notice templates is confusing (see bug 27660, bug 26787, bug 28487).
This patch remove C4::Letters::getletter and use either Koha::Notice::Templates->find
or the newly created methods ->find_effective_template that will do
all necessary to return the correct template.
Test plan:
- Create and modify notice templates
- Make sure you have TranslateNotices turned on and that some notices
templates have a translated version
- Use holds_reminder.pl and overdue_notices.pl cronjobs and confirm that
the generated notices are the expected ones
- Test also pos/printreceipt.pl
- And finally test some other notices (CHECKIN, RENEWAL for instance)
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
[EDIT] Amended by removing comment for $params={%$params}
JD amended patch:
* Add missing POD
* Fix spelling (dont ==> don't)
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We used to display a list of items that cannot be deleted (checked out
or on hold) on the Batch item deletion tool.
With bug 8132 we improve the error handling, but the info is spread in
the table.
This patch adds, at the top of the page, the list of items (barcode)
that cannot be removed.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
== Test plan ==
1 - In the default framework make sure the 952$1 is visible in opac & catalog & editor
2 - Set WhenLostChargeReplacementFee to charge
3 - Set MarkLostitemsAsReturned to return from batch modification
4 - Find/edit an item with a replacement cost
5 - Check out the item to a patron
6 - Batch modify the item
7 - Set the lost status
8 - Item is not returned or charged
9 - with the patch, it is
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Like it was done in Bug 18806.
Test plan :
Use stage-marc-import.pl with and without patch, with a matcher to find
duplicates
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Inventory explodes with the following stacktrace if timeformat is set to 12h
Invalid value passed, datelastseen=2021-04-09 12:00 AM expected type is date at /usr/share/perl5/Exception/Class/Base.pm line 88
Exception::Class::Base::throw('Koha::Exceptions::Object::BadValue', 'type', 'date', 'value', '2021-04-09 12:00 AM', 'property', 'datelastseen') called at /kohadevbox/koha/Koha/Object.pm line 196
Koha::Object::catch {...} ('DBIx::Class::Exception=HASH(0x557a052baeb0)') called at /usr/share/perl5/Try/Tiny.pm line 124
Try::Tiny::try('CODE(0x557a051931d8)', 'Try::Tiny::Catch=REF(0x557a052bfc30)') called at /kohadevbox/koha/Koha/Object.pm line 206
Koha::Object::store('Koha::Item=HASH(0x557a0521a048)') called at /kohadevbox/koha/Koha/Item.pm line 202
Koha::Item::store('Koha::Item=HASH(0x557a0521a048)') called at /kohadevbox/koha/tools/inventory.pl line 220
Test plan:
Set TimeFormat to 12h
Use the inventory
=> Confirm that it's working with this patch applied
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the ability to search/browse files by category.
(Note it doesn't include temporary uploads since they don't have
a "category" per se.)
Test Plan:
0) Apply patch
1) Go to /cgi-bin/koha/admin/authorised_values.pl
2) Create "UPLOAD" authorized value category
3) Create "test" authorized value in "UPLOAD" category
4) Go to /cgi-bin/koha/tools/upload.pl
5) Note "Search uploads by category" fieldset
6) Upload new file to "test" category
7) Click "Back"
8) Choose "test" category in "Search uploads by category"
9) Click "Search"
10) Note that your file upload is displayed in result list
Signed-off-by: Mazen Khallaf <mazen.i.khallaf@gamil.com>
Signed-off-by: Victor Grousset/tuxayo <victor@tuxayo.net>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This enhancements adds support for logging changes to notices and slips.
Features include:
- a system preference (NoticesLog) which allows you to enable logging changes for notices and slips
- logging new notices, changes to notices, and deletion of notices
- filtering in the log viewer so you can show all changes for a specific notice
- a comparison feature, so you can see what changes were made to a notice.
Test plan:
1/ Add some 'Notice' action logs by adding a new notice or updateing an
existing notice
2/ Go to the 'Log viewer' under 'Tools'
3/ Note you can filter by 'Notices'
4/ Confirm the changes you made appear in the logs and that the 'Object'
field links back to the updated notice ready for editing.
1/ Make some changes to at least two different notices to trigger logs
2/ Go to the 'Log viewer' from 'Tools' and filter on 'Notices'
3/ Note, you can now see the 'Compare' checkbox option for these logs
4/ Select the checkbox on one of the notices and note that the results
are now filtered by that specific notice.
5/ Select a second checkbox to expose the option to 'View comparison'
6/ Click 'View comparison' to see the 'Diff view' of the two notices.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This QA follow-up allows access to the old_issues table when editing the
notice in Tools.
Signed-off-by: Alexandra Speer <alexandra.speer@bsz-bw.de>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Christian Stelzenmüller <christian.stelzenmueller@bsz-bw.de>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The change to allow multiple guarantors was meant to maintain the
ability to import patrons with a Koha patron guarantor, but is not
working as intended.
A) Adding the guarantor simply doesn't work
B) We have two columns named 'relationship', one for the borrowers
table, and one for the guarantor relationships table. This clearly
doesn't work and will cause confusion. The one for the guarantor
relationships table should be renamed.
C) guarantor_firstname and guarantor_surname in the CSV file do nothing
and should be removed.
This patch also fixes a minor issue that causes warnings like:
CGI::param called in list context from
/kohadevbox/koha/tools/import_borrowers.pl line 124
Test Plan:
1) Create a CSV with contents like:
cardnumber,surname,firstname,branchcode,categorycode,guarantor_relationship,guarantor_id
bloop,gloop,froop,MPL,J,father,48
brim,flim,zim,MPL,J,father,48
2) Attempt to upload this file, ensure you have a borrowernumber 48 that
can have guarantors
3) Note the accounts are not linked
4) Apply this patch
5) Restart all the things!
6) Upload the file again
7) The patrons should now be linked!
8) Download the starter CSV file
9) Note the second relationship column is now guarantor_relationship
10) Note the columns guarantor_firstname and guarantor_surname are no longer present
Signed-off-by: Amit Gupta <amit.gupta@informaticsglobal.com>
Signed-off-by: Marti Fuerst <mfuerst@hmcpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the ability to filter inventory by item type. Multiple
item types can be selected at once.
To test:
1) Apply patch and restart services.
2) Set up (at least) one item of a specific item type.
3) Go to Tools -> Inventory.
4) Scroll down to find the item types filter. Confirm the 'select all'
and 'clear all' buttons work as expected.
5) Select a few item types, but DO NOT include the item type that you
just set for your item. Confirm that your item does not show in the
results.
6) Go back to the Inventory tool. This time submit a search that DOES
include the item type you just set for your item. Confirm that your item
does show in the results.
7) Confirm tests pass:
prove t/db_dependent/Items/GetItemsForInventory.t
Sponsored-by: Bibliotheksservice-Zentrum Baden-Württemberg (BSZ)
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Christian Stelzenmüller <christian.stelzenmueller@bsz-bw.de>
Signed-off-by: Katrin Fischer <katrin.fischer@bsz-bw.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch is the result of making the same changes we did on the
t/db_dependent/AuthorisedValues.t file (replacing the calls to
Koha::AuthorisedValues->search with the tricky branchcode param, and
call ->search_with_library_limits, with the library_id as a third
parameter.
What I did was:
$ git grep 'Koha::AuthorisedValues\->search'
and then revisited each of the grep results to check if they added the
'branchcode' parameter to the filters.
This patch changes the calls to ->search, for
->search_with_library_limits in all the places that require it in the
current codebase [1].
To test:
1. Apply this patch
2. Run:
$ kshell
k$ prove t/db_dependent/Koha/Charges/Sales.t \
t/db_dependent/Ill*
3. Verify the batchmod.pl script is working and filtering the authorised
values keeps working
[1] Some places like the Koha/Template/Plugin/AuthorisedValues.pm plugin
don't seem to be tested, at first glance.
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
In the code we prepare items for display if less than or equal to the pref, but we don't allow
the edit if greater than or equal to the pref. The second case should be only 'greater than'
To test:
1- Set MaxItemsToProcessForBatchMod to 1000
2- Go to Reports
3- Make a report for itemnumbers that will give you at least 1000 items (ex. SELECT itemnumber FROM items)
4- Save and run the report
5- In "Rows per page", choose 1000
6- Click on "Batch operations with 1000 visible records" > Batch item modification
7- Notice that the item modification form isn't there and that the message says "Too many items (1000): You are not allowed to edit more than 1000 items in a batch."
8- Apply patch
9- Restart all the things
10- Run the report again and display 1000 rows
11- Click on "Batch operations with 1000 visible records" > Batch item modification
12 - Sucess!
Signed-off-by: Barbara Johnson <barbara.johnson@bedfordtx.gov>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch replace the QOTD editor with our new way to CRUD the
adminitration page (like libraries and STMP servers)
Test plan:
Play with the QOTD by adding, removing, updating quotes
Try to find bugs :)
Bug 27251: Fix capitalization
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test Plan:
1. Go to Administration
2. Go to System Preferences
3. Find 'delimiter' (note the name)
4. Apply patch
5. Repeat step 1 and 2
6. Find 'CSVDelimiter' (note the name)
Signed-off-by: Sally <sally.healey@cheshiresharedservices.gov.uk>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It was added by bug 13552 but removed by 19793.
Test plan:
Update patron in a batch and confirm that you can modify the restriction
expiration and comment.
Signed-off-by: Joonas Kylmälä <joonas.kylmala@helsinki.fi>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We need to close STDERR when forking stage-marc-import.pl,
or else the CGI session with Apache httpd does not properly
finish. This leads to unexpected behaviour across different httpd
versions, operating systems, etc.
This patch closes the STDERR file handle when forking a child
process to do MARC imports, and it re-opens STDERR to a log file
in the logdir directory to catch any import errors.
Test plan:
1. Apply the patch
2. Go to http://localhost:8081/cgi-bin/koha/tools/stage-marc-import.pl
3. Upload a MARC file with a large number of records (e.g. 30,000 records)
4. Open F12 dev tools
5. Click on "Network" tab
6. Clear all existing network logs
7. Click "Stage for import"
8. After ~30 seconds, the request to stage-marc-import.pl should return a 200 code
9. Immediately, calls to background-job-progress.pl should start, and the "Job progress"
bar should update at a maximum rate of every .5 seconds
(or more realistically 1-2 seconds)
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch adds the logic and the needed UI elements to be able to pre-load an import profile. It also displays which profile was used to stage an import in staged import manager.
To test:
1. Apply all patches
2. Updatedatabase
3. Go to Stage MARC records for Import tool in admin, and upload a file with MARC records.
CHECK => after uploading, there is a fieldset with the legend “Profile settings”
=> inside the fieldset there is a select labeled “Pre fill values with profile”. The only value it has is “Do not use profile”.
4. Change some settings, and set “profile 1” as profile name and click on “Add profile”
SUCCESS => The select now has the new profile selected
5. Change profile select to “Do not use profile”
SUCCESS => Default values are now displayed in the form
6. Reload the page and upload the file again
SUCCESS => the select still has the profile recently added
7. Select the profile, change some parameter in the form and set the profile name to “profile 2”, and click add profile
SUCCESS => there are two profiles now, and if you toggle between them, the parameter changes
8. Select profile 1, change one parameter and click on update profile
SUCCESS => if you toggle that profile with the other, the new parameter of the value is shown when you select profile 1
9. Select profile 2, change some parameter and click Add profile (leaving the name as profile 2)
SUCCESS => the page complains there is another profile with the same name, and asks if you want to replace it.
10. Click on accept
SUCCESS => profile 2 now has the new value in the parameter
11. Select profile 2 and change the name to profile 1
SUCCESS => the page complains there is another profile with that name, and asks if you want to replace it
12. Click on accept
SUCCESS => in profile select there is only one profile called profile 1 that has the values of profile 2
13. Select profile 1 and click remove profile
SUCCESS => there is no profile in profile select.
14. Create a profile and click on “Stage for import”
15. Go to Staged MARC management page
SUCCESS => Improt should have the name of the profile in profile column, and when you click on the file name, there should be the name of the profile in the details.
16. prove t/db_dependent/ImportBatch.t t/db_dependent/api/v1/import_batch_profiles.t
17. Sign off
Signed-off-by: Abbey Holt <aholt@dubuque.lib.ia.us>
Signed-off-by: Abbey Holt <aholt@dubuque.lib.ia.us>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Here we're just adding ILL notices to the existing "letters"
infrastructure so notices can be displayed and edited
Sponsored-by: PTFS Europe
Signed-off-by: Niamh Walker-Headon <Niamh.Walker-Headon@it-tallaght.ie>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Test plan :
- Check you have in default framework an item subfield mapped with items.notforloan and with an authorized value catergory,
for example 'NOTFORLOAN'
- Create a new value in this category, for example '9'
- Create a biblio with default framework
- Create an item with barcode='000AAA1', callnumber='A-1' and notforloan=0
- Create an item with barcode='000AAA2', callnumber='A-2' and notforloan=9
- Create a file 'barecodes.txt' containing 2 lines '000AAA1' and '000AAA2'
- Go to inventory tool : /cgi-bin/koha/tools/inventory.pl
- Choose file in 'Barcode file'
- Enter item callnumber between 'A-0' and 'A-9'
- Check 'Compare barcodes list to results'
- Submit=> without patch, you get no warnings
- Redo the same inventory but with checking items.notforloan 'For loan'
(using the browser back page is ok)
- submit => still no warning, Bug 000AAA2 must be listed it's not 'For loan'
- Apply patch, repeat, with tems.notforloan 'For loan' checked you get the
right warning
Signed-off-by: Séverine QUEUNE <severine.queune@bulac.fr>
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch simply checks if conditionals are defined before comparing
We don't need to check actions because you cannot save an action without an action :-)
To test:
1 - Define several actions for a MARC modification template
2 - Ensure you have actions with no conditionals
3 - Tail the intranet logs
4 - Browse to Tools->MARC modification templates
5 - Click 'Edit actions' for the template you setup above
6 - Note warns like:
[2020/10/22 12:30:18] [WARN] Use of uninitialized value in string eq at /kohadevbox/koha/tools/marc_modification_templates.pl line 127.
7 - Apply patch
8 - Restart all the things
9 - Edit actions again and note no more warns
Signed-off-by: Chris Cormack <chrisc@catalyst.net.nz>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
In this patch we remove the limitation of 1 cover image per item
Sponsored-by: Gerhard Sondermann Dialog e.K. (presseplus.de, presseshop.at, presseshop.ch)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patchset adds the ability to attach cover images at item level.
This commit message will explain the different patches that are
following.
The main idea is to have cover images for a given item. This is useful
for a bibliographic record linked with a subscription. Each item could
have the cover image for the serial numbers.
In this first patch there is a limitation to allow only 1 cover per
item, but a later patch will remove it. That way we will take advantage
of the recent work done to display nicely cover images (bug 25031), and
reuse it in this development (staff interface only).
In order to use a flexible and robust code, the legacy C4 code
(C4::Images) has been moved to Koha::CoverImages. Also the DB table
biblioimages has been renamed cover_images.
Test plan (for the whole patch set):
0. Turn off AllowMultipleCovers
1. Create a new bibliographic record and items
2. Attach a cover image to the bibliographic record
3. In the item list of the bibliographic detail page, you will notice a
new "Upload image" action. Select it
4. Select an image
=> Notice the new column in the item table
5. Upload another image
=> You cannot upload 2 images, you are going to replace the existing one
6. Turn on AllowMultipleCovers
7. Attach another image to the image
=> Notice the 2 images are displayed nicely, with navigation controls
8. Confirm you can view an image if you click on it and you can delete it
9. Test the OPAC view now
=> Cover image for items are displayed in the table, there is no
navigation controls here however.
Sponsored-by: Gerhard Sondermann Dialog e.K. (presseplus.de, presseshop.at, presseshop.ch)
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
The warnings are
Use of uninitialized value $val in concatenation (.) or string at /kohadevbox/koha/C4/Templates.pm line 138.
Problem = a value of has been passed to param without key at /kohadevbox/koha/C4/Templates.pm line 138.
Signed-off-by: Nick Clemens <nick@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
We don't need to pass it to the job, they each know which record type
they are dealing with
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This feature has been added recently by bug 18127.
It highlights the need of a post processing hook.
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 22417: Add a note about the existence of the DB row
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 22417: (follow-up) Fix the batch authority tool
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: David Cook <dcook@prosentient.com.au>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch allows the user to scan barcodes in the inventory tool
(in addition to upload a barcode file, like in other tools)
Test plan:
1) Apply the patch.
2) Check that you can still upload a barcode file.
3) Check that you can scan/enter barcodes in the new textarea.
4) Check that if you both upload a barcode file and enter barcodes,
you will be prompted to choose only one method.
5) Check that you can then proceed to the next step by either resetting the
upload file input or emptying the textarea.
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This add an 'udated_on' column to the letter table and displays
the information in 'slips and notices'.
To test:
- Apply patch
- Run updatedatabase
Note: the existing letters will all be set to the
currnet date).
- Go to Tools > Notices and slips
- Verify there is a new column "Last updated" in the table
Note: The table will always display the newest change date
of the different message transport types.
- Edit any notice
- Verify the "Last updated" is shown for any transport type
with an existing notice definition
- Edit and add a notice
- Verify the dates are correctly stored
- Test the column configuration for the new column works
correctly
Signed-off-by: David Nind <david@davidnind.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
In tools home there is a link to the table showing tool plugins.
Would be great to be able to run a tool plugin directly from tools home.
Also adds the behavior than if there is no tool plugin, "Tool plugins"
section is not displayed in tools home.
No need of a link that goes to an empty table ;)
Test plan :
1) Enable plugins, dont install any
2) Go to "Tools" module : /cgi-bin/koha/tools/tools-home.pl
3) Check you dont see "Tool plugins"
4) Install a tool plugin like Carrousel https://inlibro.com/instructions-carrousel/
5) Refresh /cgi-bin/koha/tools/tools-home.pl
6) Check you see "Tool plugins" and a link to Carrousel
7) Click on link to Carrousel => You see plugin run
8) Disable Carrousel plugin
9) Refresh /cgi-bin/koha/tools/tools-home.pl
10) Check you dont see "Tool plugins"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
This patch modifies the news interface so that the user is offered a
choice of editing news items using the default editor as defined by the
NewsToolEditor system preference or the non-default one.
To test, apply the patch and go to Tools -> News.
- In the list of news items you should see an "Edit" split button in
each row.
- Clicking the "Edit" part of the button should open the edit view with
the correct editor as defined by the NewsToolEditor preference.
- Clicking the menu arrow on the button should offer the other editing
method:
- If NewsToolEditor is set to "WYSIWYG," the menu should offer "text
editor."
- If NewsToolEditor is set to "text editor," the menu should offer
"WYSIWYG editor."
- Test the button with the NewsToolEditor preference set to both options
and confirm that the button and menu work correctly.
Signed-off-by: Lucas Gass <lucas@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It looks like the field was intentionally removed from the list
of batch editable fields in the past. This makes sense as we
used to have a unique index on it at some point - but we do have
no more.
This removes the exception so that the invendory number behaves
like the other fields on the batch item edit form.
To test:
- Create some items with and without stocknumber
- Go to tools > batch item modification
- Enter the barcodes of your selected items in the list or
upload a file with them
- Verify that the stocknumber/inventory number is not showing
in the item edit form below
- Apply patch
- Reload the page - inventory number is there now
- Batch edit the inventory number and verify it works as expected
Signed-off-by: Andrew Fuerste-Henry <andrew@bywatersolutions.com>
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
When batch editing, 2 reindex calls are sent to ES/Zebra.
We can easily avoid that reusing the skip_modzebra_update (renamed skip_record_index)
Additionally we should only send one request for biblio, and we should
only do it if we succeed
As the whole batch mod is in a transaction it is possible to fail in which case
Zebra queue is reset, but ES indexes have already been set
In addition to the skip param this patchset moves Zebra and Elasticsearch calls to
Indexer modules and introduces a generic Koha::SearchEngine::Indexer so that we don't
need to check the engine when calling for index
The new index_records routine takes an array so that we can reduce the calls to
the ES server.
The index_records routine for Zebra loops over ModZebra to avoid affecting current behaviour
Test plan:
General tests, under both search engines:
1 - Add a biblio and confirm it is searchable
2 - Edit the biblio and confirm changes are searchable
3 - Add an item, confirm it is searchable
4 - Delete an item, confirm it is not searchable
5 - Delete a biblio, confirm it is not searchable
6 - Add an authority and confirm it is searchable
7 - Delete an authority and confirm it is not searchable
Batch mod tests, under both search engines
1 - Have a bib with several items, none marked 'not for loan'
2 - Do a staff search that returns this biblio
3 - Items show as available
4 - Click on title to go to details page
5 - Edit->Item in a batch
6 - Set the not for loan status for all items
7 - Repeat your search
8 - Items show as not for loan
9 - Test batch deleting items
a - Test with a list of items, not deleting bibs
b - Test with a list of items, deleting bibs if no items remain where all items are only item on a biblio:
SELECT MAX(barcode) FROM items GROUP BY biblionumber HAVING COUNT(barcode) IN (1)
c - Test with a list of items, deleting bibs if no items remain where some items are the only item on a biblio:
SELECT MAX(barcode) FROM items GROUP BY biblionumber HAVING COUNT(barcode) IN (1,2)
10 - Confirm records are update/deleted as appropriate
Signed-off-by: Bob Bennhoff <bbennhoff@clicweb.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
It defaults to 0 in get_template_and_user
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Tomas Cohen Arazi <tomascohen@theke.io>
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
For sites with very large amounts of due dates to extend ( tens of thousands ), it can take a very long time of the results to load ( if at all ). It would be good to have a way to bypass the confirmation screen, instead directly updating the due dates before displaying the results.
Test Plan:
1) Apply this patch
2) Browse to tools/batch_extend_due_dates.pl
3) Note the new "Preview results" checkbox
4) Submit form with the checkbox unchecked, due dates should be updated
without previewing the checkouts
5) Submit form with the checkbox checked, tool should function as
it did previously
Signed-off-by: Kelly McElligott <kelly@bywatersolutions.com>
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Bug 25101: (QA follow-up) Add hint to new option
Adds a hint about the large numbers behind the new
checkbox option.
Signed-off-by: Katrin Fischer <katrin.fischer.83@web.de>
Bug 25101: (QA follow-up) Fix hint for new option
Signed-off-by: Jonathan Druart <jonathan.druart@bugs.koha-community.org>
