The SQL column headers is stored into the columns.def file.
This file is not managed by the translation script.
This patch makes possible the headers translation.
Note: The translation xml tags were added to avoid all lines being put
on a single line.
Test plan:
1/ update your po file
cd misc/translate;
perl translate -f columns update LANG # Replace by another language here
2/ translate header columns (search "columns.def" in your po file).
3/ install the translated columns.def
perl translate -f columns install LANG # Replace by another language here
4/ go on the report module > create a new report > next > next
5/ change the language
on the 3rd step, you should see the column header translated.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described, no koha-qa errors
[on es-ES about a third of the strings translated!! :-) ]
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described and fixes a long standing translation
problem.
Passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When searching with a sort (means not by relevance) and there is an error
in Zebra connexion (server is down or query is wrong), you get the message :
Error : Can't call method "sort" on an undefined value at /home/kohaadmin/src/C4/Search.pm line 405.
This patch corrects by not performing sort if there are no no results.
Steps to reproduce the error without patch:
In OPAC go to Advanced Search
Choose "Title" in first "Search for:" end enter "ccl=( and )"
Display "More options"
Set "Sort by" to "Title (A-Z)"
Click "Search" at bootom of page
Result:
Error:
Can't call method "sort" on an undefined value at /usr/share/kohaclone/C4/Search.pm line 430.
After applying the patch, try that search again. This time,
it should report not results found with out the error message.
Alternative Test plan :
- Set OPACdefaultSortField on something else than relevance
- Perform a simple search with a wrong CCL query. For example : ccl=( and )
=> You get the messge : No results found ...
Patch behaves as expected.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Adds another check to prevent a bad Zebra error message.
Works as described, passes all tests and QA script.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
In serials/serials-edit.pl, if an item field is hidden from the OPAC,
it will not display in the editor, even if the field is marked as
visible in the staff intranet and editor. However, the field is still
displayed correctly in the items editor ( additem.pl ).:
Test Plan:
1) Select an item-level field ( e.g. non-public note )
2) Create a serial using the default framework ( or one of your choice )
3) For that framework, mark the chosen field as visible from the
intranet and editor, but not the opac.
4) Receive an item for this serial, note your field does not display
5) Use the biblio item editor to add an item ( additem.pl ), not the
field displayes
6) Apply this patch
7) Repeat step 4, not the field displayes
Signed-off-by: Kim Schwant <kim.schwant@courts.in.gov>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
PrepareItemrecordDisplay is only used for editor (-4 < hidden < 4)
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 10851 introduced new missing status (codes 41,42,43,44), but in
GetSerials and _update_missinglist, they are not taken into account.
This patch corrects the issue.
To reproduce:
1/ Create a serial with 10 issues.
2/ Set different statuses on each one, with at least 6 missing statuses
(not only "Missing").
3/ Go on the subscription detail page, tab "Summary", the issues with a
new missing status are not listed in the missing issues list.
4/ On the "Issues" tab, all missing are listed (normally only 5 should
be listed.
5/ Apply the patch.
6/ Edit serial (to rewrite the missing list).
6/ Verify that steps 3 and 4 have now correct behavior.
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Works as described, passes QA script and tests.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Show 'Unknown' when planneddate and publisheddate cannot be calculated
Also fixes SQL query in misc/cronjobs/serialsUpdate.pl that was still
using "periodicity != 32" to exclude irregular subscriptions from
results
Test plan:
1) Create a subscription in the serials module. Make sure to choose:
Frequency = Irregular
2) Test the prediction pattern, first publication date is set to
"First issue publication date" field, others will show as
'unknown'
3) Save the subscription
4) Check the created issue - it will show a published date and a
planned date (same as "First issue publication date" field)
5) Receive the issue and check the next generated issue, planned
date and published date should show as 'Unknown'
6) Generate a next issue, planned date and published date should
also show as 'Unknown'
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described following test plan.
No koha-qa errors
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Also tested:
- multi receiving generates mulitple issues without dates - 'unknown'
- staff detail page shows the dates empty, which is fine
- OPAC detail page shows the dates empty, which is fine
- serial collection page shows 'unknown' and those issues appear
on the 'manage' tab, as they did in the past
- Editing the issue from the serial collection page leaves the
date fields empty.
- Receving the issue, setting the status to 'Arrived' the Expected on
date is set to 'today' automatically. Date published has to be
entered manually (maybe something we could improve later
- subscription detail > issues tab shows Uknown.
- t/db_dependent/Serials/GetNextDate.t pass.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch puts C4::Serials::can_show_subscription() into use.
Note that there is user-visible change: if a subscription has a
blank library, all users with serials permissions will be able
to view and/or edit it. It remains to be determined whether
we *want* such subscriptions to exist, or if they should only
be tied to specific libraries.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Tested on top of patches for 12048 and 12080.
Subscription search
- superlibrarian, IndyBranches on/off - always sees all subscriptions
- superserials, IndyBranches on/off - always sees all subscriptions
- no superserials, IndyBranches on - only sees own subscriptions
Note: Subscriptions without branches will only show, when all subscriptions
are visible. In a future enh it might be good to enforce setting a
branch, when IndyBranches is used.
- no superserials, IndyBranches off - always sees all subscriptions
Subscription editing
- superlibrarian, IndyBranches on/off - can edit all subscriptions
- superserials, IndyBranches on/off - can edit all subscriptions
- no superserials, IndyBranches on - can only edit own subscriptons and
subscriptions without branch
NOTE: it would make sense to also allow Edit > Edit as new (duplicate)
here, so one can copy the subscription from another branch to modify
it for the own branch.
Passes tests in t, xt and QA script, also newly provided unit tests.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch fixes a problem whereby staff users could
edit subscriptions they are not permitted to by going directly
to the subscription details page.
It also adds some unit tests for the can_edit_subscription routine
and add a new can_show_subscription routines.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Notes on second patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The superserials permission is meant to allow an operator
to see all subscriptions regardless of branch when IndependentBranches
is on without having to have full superlibrarian permissions. This
patch restores this behavior.
TEST PLAN
---------
1) Apply the patch for bug 12048 (as needed -- it may be pushed)
2) Ensure you have two users: superlibrarian, non-superlibrarian
with all access to the staff client except superserials.
3) Ensure you have serials belonging to a different branch than
the non-superlibrarian.
3) Log into staff client as superlibrarian
4) Click 'Serials'
5) Click the 'Submit' button in the search area.
-- note the number of results.
6) Log into staff client as non-superlibrarian
7) Click 'Serials'
8) Click the 'Submit' button in the search area.
-- note the number should be less, note the number.
9) Give the non-superlibrarian superserials access.
10) Home -> Serials
11) Click the 'Submit' button in the search area.
-- the number will still be the same at the one in step #8.
12) Apply the patch
13) Refresh the page
-- the number should now match the one in step #5.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch fixes a regression in master and 3.14. When a user has
superlibrian permissions, a search on serials subscriptions should
display other libraries' subscriptions even when IndependentBranches
syspref is enabled.
To reproduce/test the bug/patch:
1. Enable IndependentBranches (i.e. 'Prevent' staff...)
2. Login as a user not having superlibrarian permission
3. Search for a serial subscription on:
/cgi-bin/koha/serials/serials-search.pl
4. Search a title which has at least 2 subscriptions: one in the user
branch, and one in another branch
5. On the result page, just 1 subscription is displayed: the one
attached to the userbranch
=> this is normal
6. Login as a user having superlibrarian permission
7. Repeat step 3-5.
8. You get the same result as 5. You should have seen all subscriptions.
That's what you get after applying this patch.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
NOTE: I tested a variation. My superlibrarian was a branch that
was not the same as the non-superlibrarian. The serial was
the same branch as the non-superlibrarian. Without the
patch, the superlibrarian saw nothing, with the patch it
saw the serial as expected.
Also, remember the superserials permission can affect the
results. I successfully changed the branch of the
subscription, and then it ceased to show up with
superserials not granted to the non-superlibrarian.
I corrected the system preference name in the text here.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Superlibrarian permission now allows to see all subscriptions
independent from the branch.
Passes all tests and QA script.
But the superserials permission appears broken to me before
and after this patch. If I have superserials - the search
doesn't show all subscriptions. If I don't have superserials
I can still edit any subscription accessing the subscription
detail page through the serial collection page or accessing
the detail page directly by manipulating the URL.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch fixes two problems with the generation of
links to execute a Z39.50 search from the staff client
catalog and cataloguing search results page.
First, if using URI::Escape 3.30 or earlier, performing a simple search
with a double quote (e.g., "histoire algerie"), the Javascript is broken
in results page because of :
function GetZ3950Terms(){
var strQuery="&frameworkcode=";
strQuery += "&" + "title" + "=" + ""histoire%20algerie"";
Second, the encoding of non-ASCII characters in the search
term was broken.
This patch moves URI escaping from Perl to template with uri TT filter.
Test plan :
- To reproduce the issue with double quotes, the server
must be running URI::Escape 3.30 or earlier; the current
version of URI::Escape properly escapes double quote.
- In staff interface, perform a search with double quotes
that will return no result, ie "aaa xxx"
=> Without patch, javascript is broken
=> With patch, javascript is not broken
- Click on Z3950 button on results page
=> Without patch, the Title input is empty
=> With patch, the Title input contains the search terms
Additional test:
Do a search with something like äöü and then click Z3950
button on results page.
Without patch, encoding is broken in Z3950 form
With patch, encoding is correct.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Fixed a few tabs. Passes tests and QA script.
I can't reproduce the Javascript problem, but I can reproduce
the Z39.50 encoding problem and can detect no regression.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch fixes a problem where the holds queue generator
was making requests where the pickup library is the
same as the item's library but not the patron's branch,
even if there is a "Default holds policy by item type" rule that states
this item can only fill holds for patrons of the same library as the
item.
Test Plan:
1) Create a test record with 2 items with different itemtypes
2) Set the Default holds policy by item type for the first
item to "From any library"
3) Set the Default holds policy by item type for the second
item to "From home library"
4) Place a record level hold for a patron from another library,
but for pickup at the same library as the item is from
5) Rebuild the holds queue
6) View the holds queue, note the item is listed, though this
patron cannot place a hold on this item
7) Apply this patch
8) Repeat step 5, note the hold is no longer in the queue
Signed-off-by: Liz Rea <liz@catalyst.net.nz>
automated tests pass, functional tests pass. Bug replicated, eradicated by patch.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
I finally managed to reproduce this, patch works as described.
Passes tests and QA script, provided tests fail without patch, but
succeed with the patch.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch modifies _Findgroupreserve so that its one caller,
CheckReserves(), would include the reserve_id field in the
hold request it returns.
Failure to include reserve_id in every circumstance resulted
in bug 11947. This patch is therefore a complementary fix for
that bug, but is not meant to preempt the direct fix for
that bug.
To test:
[1] Verify that t/db_dependent/Reserves.t passes.
[2] Verify that the following test plan taken from
the patch for bug 11947 works for this patch
*without* applying the patch for 11947:
* have a few borrowers, say 4.
* have a biblio with a single item (you can scale this up, it should
work just the same.)
* issue the item to borrower A
* have borrowers B, C, and D place a hold on the item
* return the item, acknowledge that it'll be put aside for B.
* view the holds on the item.
Without the patch:
* the hold priorities in the UI end up being "waiting, 2, 1" when they
should be "waiting, 1, 2".
* in the database "reserves" table, they're really "0, 2, 3" when they
should be "0, 1, 2".
With the patch:
* the hold priorities in the UI end up being "waiting, 1, 2"
* in the database, they're "0, 1, 2"
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Work as described. No koha-qa errors. Test pass
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch tightens up the initialization of the $restriction_age
variable and uses $bibvalues throughout.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch makes the parsing of AgeRestrictionMarker values consider
the case where the marker is immediately followed by the age, e.g.
"K16" in Finland.
How I tested:
[1] Configure Age Restricition (see Syspref AgeRestrictionMarker) and
have a biblio record with e.g. PEGI 99 in age restriction field.
[2] Try to check out to a patron with age < 99
[3] Check out should be blocked
[4] Change entry in age restriction field to PEGI99
[5] Checkout should be possible
[6] Apply patch
[7] Checkout schould now be blocked
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch puts the MARC21 variant of the bugfix in alignment
with the UNIMARC variant, removing the use of unnecessary
temporary variables.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
I got the same warning for my UNIMARC DB.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This was discovered when someone triggered an authority search
on an authority record that was missing what is assumed the
default subfield for a given field.
It, however, also can be triggered in an OPAC authority search
by looking at the record that lacks the default subfield for a
given field.
TEST PLAN
---------
1) Create an authority record with 180$x and NOT 180$v.
See C4::AuthoritiesMarc::BuildSummary in the 1.. foreach loop
for known tags and default values. The default subfields are
the first letter of the $subfields_to_report string.
2) Trigger the bug:
Method 1: /cgi-bin/koha/opac-authoritiesdetail.pl?authid=#
Where # is the authority id of your tweaked record.
The error occurs in Normal view.
Method 2: Home -> Cataloging -> + New record
-> Click the 'Tag Editor' on 100$a
Editing of $a to $b and back may be required.
3) Notice there is an error log entry.
4) Apply the patch
5) Attempt to trigger the bug again
6) That specific error log entry is not generated.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Could generate the warning with a missing 151$a with both methods.
No warning anymore after applying this patch.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This was tricky to catch. In current implementation, Bug 6755
introduced in C4/Templates.pm as condition to send the array of
hashrefs of languages that (@$languages_loop<2), but with one
language group that condition is false, there is only one
element in that array.
This patch changes that condition to have more than one language
selected, grouped or not.
Also send $bidi value always, that was only sent if there is
more than one group language.
To test:
1. Translate to en-GB and en-NZ, or simply do mkdirs
on intranet-tmpl/prog and opac-tmpl/bootstrap
2. Go to Administration > System preferences > I18N
enable those languages on staff/opac
3. Check that language chooser is nowhere to be found
4. Apply the patch
5. Reload staff/opac, now you can see language chooser
NOTE: I made little changes on staff, but can't replicate
bootstrap colors for selected/unselected language. Someone
need to touch css files to make it happen. But that is
current behavior.
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Good catch!
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Currently when a reserve is moved to "waiting" status because it's
acknowledged on checkin, the reserve priorities aren't renumbered. This
causes things to go a bit haywire in the UI, in particular, some
reserves can unjustly end up with priority 1 when they shouldn't. It
also seemed to mess with the logic of who should get it next, but I
didn't look too closely at that.
This patch forces a renumbering so that all the priorities remain
copacetic.
Test plan:
* have a few borrowers, say 4.
* have a biblio with a single item (you can scale this up, it should
work just the same.)
* issue the item to borrower A
* have borrowers B, C, and D place a hold on the item
* return the item, acknowledge that it'll be put aside for B.
* view the holds on the item.
Without the patch:
* the hold priorities in the UI end up being "waiting, 2, 1" when they
should be "waiting, 1, 2".
* in the database "reserves" table, they're really "0, 2, 3" when they
should be "0, 1, 2".
With the patch:
* the hold priorities in the UI end up being "waiting, 1, 2"
* in the database, they're "0, 1, 2"
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Test plan confirms that the problem exists and that the patch corrects
it.
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script, especially t/db_dependent/Reserves.t.
Improves priority calculation.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
C4::Circulation::CanBookBeRenewed called C4::Members::GetMemberDetails to
retrieve categorycode and branchcode.
- categorycode is used to retrieve the issuing rule
- the borrower information is passed to
C4::Circulation::_GetCircControlBranch. Which only uses the branchcode
parameter.
GetMemberDetails does a lot of calls/queries (patronflags,
account, etc.) that are not needed by CanBookBeRenewed.
This patch replaces it with a call to C4::Members::GetMember.
Note: I presented this small optimisation during a quick introduction to
NYTProf (hackfest 14 in Marseille).
Test plan:
- launch member unit tests
- check the code
Checking the code resulted in the following:
CanBookBeRenewed builds a hash reference from the borrowernumber
(2482). Note it is only used in this function and not passed in.
_GetCircControlBranch (2485) requires that hashreference to
have a branchcode key. As stated above.
The following line (2486) requires it have a categorycode key.
As such, C4::Members::GetMemberDetails is confirmed to be
overkill, and C4::Members::GetMember is sufficient.
Testing Done
------------
0) Back up DB
1) Make sure MPL is in the list of libraries.
2) Apply the patch.
3) run the koha qa test tool
4) prove -v t/db_dependent/Circulation.t
Patch applies cleanly. QA Test tool was all OK. All tests ran successfully.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 10649 introduced a new include file for adding DataTables-related
JavaScript assets. This patch adds use of this include file to all
circ-related pages which use DataTables.
Apply the patch and test the following pages to confirm that table
sorting works correctly:
- Circulation
- The UseTablesortForCirc system preference must be enabled.
- Check out to a patron with existing checkouts. Choose a patron who
is a guarantor to another patron with checkouts in order to test the
relatives' checkouts table.
- The checkouts and relatives' checkouts tables have been modified to
exclude articles when sorting of titles.
- Hold ratios - The title column has been configured to exclude articles
from sorting
- Transfer to receive
- Holds queue
- The title column has been configured to exclude articles when
sorting
- The date column has been modified to use the title-string filter for
sorting. An unformatted date is now passed from C4::HoldsQueue.pm to
the template, where the KohaDates filter is used for formatting.
Sorting is based on the unformatted date.
- Holds awaiting pickup
- The "available since" column has been configured for sorting on an
unformatted date. waitingreserves.pl now passes the unformatted
date to the template, and formatting is done using the KohaDates
filter.
- The title column has been configured to exclude articles when
sorting.
Edit: Rebased on current master following commit of Bug 11605
Signed-off-by: A. Sassmannshausen <alex.sassmannshausen@ptfs-europe.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch modifies GetSoonestRenewDate() so that it returns
undef if the patron, item, or loan cannot be found. This
better reflects the usage of this routine GetSoonestRenewDate(),
as none of its callers tried to check the second return
value containing an error code.
This patch also updates the POD to match.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch modifies CanBookBeRenewed, so that based on
issuingrules.norenewalbefore a new error "too_soon" can be returned.
Also adds a new subroutine GetSoonestRenewDate.
To test:
1) Create an issuing rule with "No renewal before" set to value X
and "Unit" set to days.
2) Test the following steps for both:
Home > Patron > Patron details
Home > Circulation > Checkouts
3) On the checkout page, test for today's issues as well as previous
issues. (Check something out on one day and something else on the
next day, then do the testing.)
4) Confirm that items can't be renewed if current date is more than
X days before due date.
5) Confirm that the date and time of the soonest possible renewal are
displayed in the format specified by global sysprefs "dateformat"
and "TimeFormat".
6) Confirm that items can be renewed if "No renewal before" is
undefined or current date is X or less days before due date.
7) Confirm that if the number of allowed renewals is exceeded
"Not renewable" is displayed, no matter what "No renewal before"
is set to.
8) Test the same things with "Unit" set to hours.
Sponsored-by: Hochschule für Gesundheit (hsg), Germany
Signed-off-by: Martin Renvoize <martin.renvoize@ptfs-europe.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
The WHERE clause should not erase $query.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This adds the ability to specify whether staff, OPAC,
or slip news entries apply to all libraries or just a
particular library.
With the branch parameter added to key functions in
C4/NewsChannels.pm, function calls in C4/Members.pm,
mainpage.pl, opac/opac-main.pl, tools/koha-news.pl, and
t/db_dependent/NewsChannels.t were needed.
Some license texts were updated.
Templates were modified to display, allow for entry and editing
of the branches selected.
TEST PLAN
---------
1) Having logged into the staff client, is the news displaying
correctly? Have you entered a news item which should not
display for this branch of logged in user?
2) Find a patron (with some items checked out?)
3) Print a slip
- News which is labelled 'All Branches' or for the same branch
as the one printing the slip should display on the slip.
- THIS DOES NOT AFFECT QUICK SLIPS
4) Home -> Tools -> News
- Can you edit a news item?
- Does the change save correctly?
- Can you filter based on location and branch correctly?
- Can you add a new entry correctly?
- Can you delete an entry correctly?
5) Open an OPAC client.
- Does only the news for all branches display?
6) Log into the OPAC client.
- Does the news for all branches and the specific branch display?
7) prove -v t/db_dependent/NewsChannels.t
- Does it run and all succeed?
- Does the code seem to catch the required cases?
8) Comparing the patched and unpatched versions of files affected,
are the license changes missing anything?
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Changed the add and update functions to use a hash reference
for the parameter, so that adding or subtracting parameters
should be easier. Added some POD for the add_opac_news and
upd_opac_news functions, so that developers would know how to
call it.
The hashref changes resulted in being able to return 0 for
failure and 1 for success. This meant adding a couple tests
to the test file.
And while testing, there was some sort of logic problem with
the matter of '' being all, but selecting all only showed
things set for all, and excluded particular languages, or other
interfaces.
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
"When all the data has been fetched from a SELECT statement,
the driver will automatically call finish for you. So you should
not call it explicitly except when you know that you've not
fetched all the data from a statement handle and the handle
won't be destroyed soon."
(http://search.cpan.org/~timb/DBI-1.627/DBI.pm#finish)
All the $sth variables were scoped within the functions,
and would be destroyed immediately. Additionally, there was
one after a SELECT, for only a single idnew, and so it was
not necessary.
TEST PLAN
---------
1) prove -v t/db_dependent/NewsChannels.t
2) apply patch
3) prove -v t/db_dependent/NewsChannels.t
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
ok 1 - use C4::NewsChannels;
ok 2 - Successfully added the first dummy news item!
ok 3 - Successfully added the second dummy news item!
ok 4 - Successfully updated second dummy news item!
ok 5 - Successfully tested get_opac_new id1!
ok 6 - Successfully tested get_opac_new id2!
ok 7 - Successfully tested get_opac_news!
ok 8 - Successfully tested GetNewsToDisplay!
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Grabbed the current license from
http://wiki.koha-community.org/wiki/Coding_Guidelines#Licence
and changed the use strict; use warnings; into a
use Modern::Perl instead.
TEST PLAN
---------
1) Log into staff client.
- Does news look okay?
2) Apply patch
3) Refresh staff client.
- Does news look the same?
Signed-off-by: Chris Cormack <chris@bigballofwax.co.nz>
Safe no op action
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch fixes an issue originally reported by bug 11702.
RM note: the patch is clear enough and doesn't break existing tests,
but on the other hand, I have been completely unable to reproduce
the original issue.
To test:
[1] Verify that prove -v t/db_dependent/Holds.t passes
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When calling C4::Context::Zconn twice with different parameters,
the same ZOOM::Connection object is returned twice (parameters
of 2nd call are not used) This patch fixes that.
This is in part because the connection cache is keyed on server
name only. This patch corrects this by keying on all parameters.
TEST PLAN
---------
1) apply patch
2) run koha qa test tools
3) prove -v t/Context.t
The unit tests properly triggers the modified routine for
testing. Additionally, in hunting for ways it could break,
no nested synchronous or asynchronous Zconn's were found.
And even if they were, the keying on all parameters should allow
it to function properly without messing up the other connection.
Signed-off-by: Mark Tompsett <mtompset@hotmail.com>
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
When the ability to stage authority records was added to Koha, sorting
record batches by citation ( i.e. title ) caused the addition of
"authorized_heading" to be added to the sort. When sorting by title
descending, this causes the order by clause to be "title,
authorized_heading DESC" which means sort by title ASC, then
authorized_heading DESC. This is incorrect and causes regular biblio
batches to always be sorted ascending.
Test plan:
1) Stage a batch of biblio records from a file
2) View the staged batch
3) Attempt to sort by title descending
4) Note it is still sorted by title ascending
5) Apply this patch
6) Note the sorting now works correctly
Signed-off-by: Owen Leonard <oleonard@myacpl.org>
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Works as advertised. The code pertaining to sorting in routine
GetImportRecordsRange will probably not win beauty prizes.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Koha Team Lyon 3 <koha@univ-lyon3.fr>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Added Sign off line.
Passes all tests and QA script, including t/db_dependent/Serials.t
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Bug 10649 introduced a new include file for adding DataTables-related
JavaScript assets. This patch adds use of this include file to all
circ-related pages which use DataTables.
Apply the patch and test the following pages to confirm that table
sorting works correctly:
- Reports -> Guided reports -> Use saved
(reports/guided_reports.pl?phase=Use saved):
"Creation date" sorting has been reconfigured to use the title-string
method for sorting on an unformatted date. C4:Reports::Guided.pm has
been modified to pass an unformatted date to the template. Sorting
should work correctly for all settings of the dateformat system pref.
- Reports -> Catalog by item type
(reports/manager.pl?report_name=itemtypes)
- Reports -> Serials statistics wizard (reports/serials_stats.pl):
The subscription begin and subscription end columns have been modified
to use the title-string filter for sorting. An unformatted date is now
passed from reports/serials_stats.pl to the template, where the
KohaDates filter is used for formatting. Sorting is based on the
unformatted date. Sorting should work correctly for all settings of
the dateformat system pref.
- Sorting of titles should now exclude article from sorting.
- Minor template improvements:
- Vendor name now links to vendor details.
- Subscription title now links to subscription details.
- Library name is now shown instead of branchcode.
Signed-off-by: Aleisha <aleishaamohia@hotmail.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Passes all tests and QA script.
Checked all pages, no regressions or Javascript errors detected.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Test plan :
- Define a notice containing <<borrowers.streettype>>
- Trigger an event that generate this notice
Without patch <<borrowers.streettype>> is replaced by ROADTYPE
authorised value code. With the patch it is resplaced by its
description
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
This works as described, passes tests and QA script.
Note: it seems it's not possible currently to use B_streettype from
the interface, but it might be worth adding it as a follow up for later
use.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
If GetOrder is called with a nonexistent ordernumber or without any
ordernumber, it should return undef.
Test plan:
prove t/db_dependent/Acquisition.t
Signed-off-by: Katrin Fischer <Katrin.Fischer.83@web.de>
Updated number of tests to 68, tests and QA script all happy now.
Looked at a few pages in aquisition using GetOrder as well.
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch finishes the work started in one of the previous
follow-ups and allows CardnumberLength to be set to a value
like ',5'. In conjunction with not including cardnumber in
BorrowerMandatoryField, this allows a cardnumber to not be
required but, if present, to not exceed the specified length.
This patch also updates t/db_dependent/Members.t so that
it runs in a transaction, tests the new return value
of checkcardnumber, and manages the CardnumberLength syspref.
To test:
[1] Verify that prove -v t/db_dependent/Members.t and
prove -v t/Members/cardnumber.t pass.
[2] Set CardnumberLength to ",5" and take cardnubmer out of
the BorrowerMandatoryField list.
[3] Verify that you can save a patron record without a cardnumber,
but if you supply one, that it can be at most 5 characters long.
[4] Add cardnumber back to BorrowerMandatoryField. This time, the
minimum length is 1 even though CardnumberLength is ",5".
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch refactors the previous code and moves the logic from the pl
to a new routine.
Same test plan as previous patch.
/!\ new unit test filename.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Bug 10861: Reintroduced the cardnumber length check (client side)
Previous patches has removed the pattern attribute of the input, it was
not needed. This patch reintroduces it. It will only work for new
browser version.
Moreover, it manages with the ',XX' format (see UT).
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Squashed the last two follow-ups. The pattern test did not work fully for me
in Firefox 26 (very recent). But I see the message when I clear the field.
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Some libraries would like to add a check on the cardnumber length.
This patch adds the ability to restrict the cardnumber to a specific
length (strictly equal to XX, or length > XX or min < length < max).
This restriction is checked on inserting/updating a patron or on importing
patrons.
This patch adds:
- 1 new syspref CardnumberLength. 2 formats: a number or a range
(xx,yy).
- 1 new unit test file t/Members/checkcardnumber.t for the
C4::Members::checkcardnumber routine.
Test plan:
1/ Fill the pref CardnumberLength with '5,8'
2/ Create a new patron with an invalid cardnumber (123456789)
3/ Check that you cannot save
4/ With Firebug, replace the pattern attribute value (for the cardnumber
input) with ".{5,10}"
5/ You are allowed to save but an error occurred.
6/ Try the same steps for update.
7/ Go to the import borrowers tool.
8/ Play with the import borrowers tool. We must test add/update patrons
and the "record matching" field (cardnumber or a uniq patron attribute)
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Tested adding, updating; importing and ran unit test.
Preliminary QA comments on Bugzilla
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The SearchOrders routine should return the booksellerid and this
patch adds it.
This fixes several problems:
[1] The link to the vendor on the order receive page breadcrumbs
was broken.
[2] The tax calculation in finishreceive.pl didn't run.
[3] The item booksellerid field never got updated during
receipt.
Booksellerid was returned before bug 10723.
Quick test plan:
Go on orderreceive.pl and verify that the vendor link is correct.
Followed test plan. Vendor link is now correct.
Signed-off-by: Marc Véron <veron@veron.ch>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch also adds POD and UT for the change in SearchOrders()
Signed-off-by: Jonathan Druart <jonathan.druart@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
The order status ordered is set when the basket is closed.
The parcel page should only display status "ordered" and "partial".
Test plan:
- create a basket.
- create an order.
- verify the order is not listed on the parcel page (i.e. you cannot
receive it).
- close the basket.
- verify the order is listed on the parcel page.
Signed-off-by: Marcel de Rooy <m.de.rooy@rijksmuseum.nl>
Signed-off-by: Kyle M Hall <kyle@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
This patch removes some dead code concerning the handling of patrons
that are members of other, institutional patrons. This code did not
work; removing it clears the field if somebody wants to do a better
implementation of such relationships between patrons.
This patch:
[1] Removes the memberofinstitution system preference.
[2] Removes the following routines:
C4::Members::get_institutions()
C4::Members::add_member_orgs() (and removing this routine
removes a reference to a borrowers_to_borrowers table that
does not exist).
There should be no changes whatsoever to system functionality with this
patch (with the trivial exception of the absence of the
memberofinstitution system preference).
Test plan:
[1] Look at the code and use grep, git grep, etc. verify this patch
does not remove something in use.
[2] Verify that there are no regressions upon adding or editing
a patron record.
[3] Verify that the memberofinstitution system preference has been
removed
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
Signed-off-by: Brendan Gallagher <brendan@bywatersolutions.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
DBD::Mysql provides a mysql_auto_reconnect flag. Using it avoids
the time required to do a $dbh->ping().
Benchmarks:
use Modern::Perl;
use C4::Context;
for ( 1 .. 1000 ) {
$dbh = C4::Context->dbh;
}
* without this patch on a local DB:
perl t.pl 0,49s user 0,02s system 98% cpu 0,525 total
* without this patch on a remote DB:
perl t.pl 0,52s user 0,05s system 1% cpu 37,358 total
* with this patch on a local DB:
perl t.pl 0,46s user 0,04s system 99% cpu 0,509 total
* with this patch on a remote DB:
perl t.pl 0,49s user 0,02s system 56% cpu 0,892 total
Testing the auto reconnect:
use Modern::Perl;
use C4::Context;
my $ping = $dbh->ping;
say $ping;
$dbh->disconnect;
$ping = $dbh->ping;
say $ping;
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Comment: Real improvement. No koha-qa errors
prove t/db_dependent/Circulation_issuingrules.t produces no error
prove t/db_dependent/Context.t produces no error
Test
1) dumped Koha DB, load it on a non-local server
2) run sample script whit and without patch, local and remote
use Modern::Perl;
use C4::Context;
for ( 1 .. 100000 ) {
my $dbh = C4::Context->dbh;
}
Main difference I note is with remote server
a) without patch
real 0m16.357s
user 0m2.592s
sys 0m2.132s
b) with patch
real 0m0.259s
user 0m0.240s
sys 0m0.012s
I think this could be good for DBs placed on
remote servers
Bug 10611: add a "new" parameter to C4::Context->dbh
When dbh->disconnect is called and the mysql_auto_reconnect flag is set,
the dbh is not recreated: the old one is used.
Adding a new flag, we can now force the C4::Context->dbh method to
return a new dbh.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Bug 10611: Followup: remove useless calls to dbh->disconnect
These 3 calls to disconnect are done at the end of the script, they are
useless.
Signed-off-by: Bernardo Gonzalez Kriegel <bgkriegel@gmail.com>
Signed-off-by: Paul Poulain <paul.poulain@biblibre.com>
Signed-off-by: Galen Charlton <gmc@esilibrary.com>
